Tasmota/tools/fw_SonoffZigbeeBridge_ezsp
Stephan Hadinger ae4de426d0 Add Zigbee firmware 6.7.9 for Sonoff ZBBridge 2021-04-30 22:14:00 +02:00
..
archive Move 6.7.6 to archive 2021-03-29 17:44:02 +02:00
ncp-uart-nsw_6.7.9_115200.ota Add Zigbee firmware 6.7.9 for Sonoff ZBBridge 2021-04-30 22:14:00 +02:00
ncp-uart-sw_6.7.8_115200.ota Zigbee add EZSP 6.7.8 as Release Candidate firmware 2021-01-19 13:37:53 +01:00
readme.md Add Zigbee firmware 6.7.9 for Sonoff ZBBridge 2021-04-30 22:14:00 +02:00

readme.md

EmberZNet NCP UART EZSP firmware

EmberZNet NCP UART EZSP firmware signed for Sonoff ZBBridge

  • ncp-uart-sw-6.7.8_115200.ota - NEW: The current and recommended stable version for EZSP v8 compatible hosts.

  • ncp-uart-nsw_6.7.9_115200.ota - has some additional bug fixes and is under testing.

Archived versions

  • ncp-uart-sw_6.7.6_115200.ota - OLD: Original version for EZSP v8 compatible hosts, (contains a bug that can cause battery of IKEA and Philips remotes to drain).
  • ncp-uart-sw_6.5.5_115200.ota - LEGACY: Legacy version for older EZSP v7 compatible hosts.

EFR32, EmberZNet and EZSP Protocol Versions

EZSP stands for "EmberZNet Serial Protocol" which is the default serial interface used in compatible Zigbee coordinator firmware for the Silicon Labs EFR32 hardware family such as the EFR32MG21/MGM210 and EFR32MG12/MGM12 series.

Silicon Labs do not currently have a consolidated list of changes by EmberZNet SDK or EZSP protocol versions. The EZSP additions, changes and deletions have only ever been listed in the Zigbee EmberZNet Release Notes (EmberZNet SDK) under the "New items" section as well as the matching UG100 EZSP Reference Guide included with each EmberZNet SDK release.

The largest change was between EZSP v4 (first added in EmberZNet 4.7.2 SDK) and EZSP v5 that was added in EmberZNet 5.9.0 SDK which requires the Legacy Frame ID 0xFF. The change from EZSP v5 to EZSP v6 was done in EmberZNet 6.0.0 SDK. The change from EZSP v6 to EZSP v7 was in EmberZNet 6.4.0 SDK. EmberZNet 6.7.0 SDK added EZSP v8 (and Secure EZSP Protocol Version 2).

Perhaps more important to know is that EZSP v5, v6 and v7 (EmberZNet 6.6.x.x) use the same framing format, but EmberZNet 6.7.x.x/EZSP v8 introduced new framing format and expanded command id field from 8 bits to 16 bits.

See Silabs Zigbee & Thread Knowledge Base Articles List for background information.