Tasmota/tasmota/xsns_88_am2320.ino

/*
  xsns_88_am2320.ino - I2C AM2320 Temp/Hum Sensor for Tasmota

  Copyright (C) 2021  Lars Wessels

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_I2C
#ifdef USE_AM2320
/*********************************************************************************************\
 * AM2320 - Digital Temperature and Humidity Sensor
 * https://akizukidenshi.com/download/ds/aosong/AM2320.pdf
 *
 * based on https://github.com/hibikiledo/AM2320 from Ratthanan Nalintasnai
 * and https://github.com/adafruit/Adafruit_AM2320 from Limor Fried (Adafruit Industries)
 * and https://github.com/nightphobos/tasmota-am2320-i2c-driver as adaptation code to Tamota
\*********************************************************************************************/

#define XSNS_88           88
#define XI2C_60           60     // See I2CDEVICES.md

#define AM2320_ADDR				0x5C	 // use 7bit address: 0xB8 >> 1
#define INIT_MAX_RETRIES  5

char AM2320_types[] = "AM2320";

uint8_t am2320_found = 0;
struct AM2320_Readings {
  uint8_t valid = 0;
  float t = NAN;
  float h = NAN;
} AM2320;


bool Am2320Init(void)
{
  // wake AM2320 up, goes to sleep to not warm up and affect the humidity sensor
  Wire.beginTransmission(AM2320_ADDR);
  Wire.write(0x02);
  Wire.endTransmission();
  delay(1);

  Wire.beginTransmission(AM2320_ADDR); // start transmission
  Wire.write(0x03);  // read register data (function code)
  Wire.write(0x00);  // start address (0x00 = Temp, 0x02 = Humidity)
  Wire.write(0x04);  // read 4 bytes (2 byte temperature + 2 byte humidity)
  if (Wire.endTransmission(1) != 0) {
    return false;
  }
  return true;
}


unsigned int crc16(byte *ptr, byte length)
{
  unsigned int crc = 0xFFFF;

  while(length--) {
    crc ^= *ptr++;
    for(uint8_t i = 0; i < 8; i++) {
      if ((crc & 0x01) != 0) {
        crc >>= 1;
        crc ^= 0xA001;
      } else {
        crc >>= 1;
      }
    }
  }
  return crc;
}


bool Am2320Read(void)
{
  byte buf[8];

  if (AM2320.valid > 0) { AM2320.valid--; }
  if (!Am2320Init()) { return false; }

  delayMicroseconds(1600); // >=1.5ms
  Wire.requestFrom(AM2320_ADDR, 8); // request all data
  if (Wire.available() != 8) { return false; }

  // read 8 bytes: preamble(2) + data(2) + crc(2)
  memset(buf, 0, 8);
  for (uint8_t i = 0; i < 8; i++) {
    buf[i] = Wire.read();
  }

  if (buf[0] != 0x03) { return false; }  // must be 0x03 function code reply
  if (buf[1] != 4) { return false; }  // must be 4 bytes reply

  // verify checksum
  unsigned int receivedCrc = (buf[7] << 8) | buf[6];  // pack high and low byte together
  if (receivedCrc == crc16(buf, 6)) {  // preamble + data
    int temperature = ((buf[4] & 0x7F) << 8) | buf[5];
    AM2320.t = temperature / 10.0;
    // check for negative temp reading
    AM2320.t = ((buf[4] & 0x80) >> 7) == 1 ? AM2320.t * (-1) : AM2320.t;

    int humidity = (buf[2] << 8) | buf[3];
    AM2320.h = humidity / 10.0;

    AM2320.valid = SENSOR_MAX_MISS; // reset error counter
    return true;

  } else {
    AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_I2C "Am2320Read() checksum failed"));
    return false;
  }
}


void Am2320Detect(void)
{
  if (Am2320Init()) {
    if (!am2320_found) {
      AddLog(LOG_LEVEL_INFO, S_LOG_I2C_FOUND_AT, AM2320_types, AM2320_ADDR);
    } else {
      AddLog(LOG_LEVEL_DEBUG, S_LOG_I2C_FOUND_AT, AM2320_types, AM2320_ADDR);
    }
    am2320_found = 3;
  } else {
    if (am2320_found) { am2320_found--; }
  }
}


void Am2320EverySecond(void)
{
  // if (!(uptime%10)) {
  //   Am2320Detect(); // look for sensor every 10 seconds, after three misses it's set to not found
  // } else if (uptime & 1 && am2320_found) { // read from sensor every 2 seconds
  if (TasmotaGlobal.uptime &1) {
    if (!Am2320Read()) {
      AddLogMissed(AM2320_types, AM2320.valid);
    }
  // }
  }
}


void Am2320Show(bool json)
{
  if (AM2320.valid) {
    float t = ConvertTemp(AM2320.t);
    float h = ConvertHumidity(AM2320.h);

    TempHumDewShow(json, (0 == TasmotaGlobal.tele_period), AM2320_types, t, h);
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xsns88(uint8_t function)
{
  if (!I2cEnabled(XI2C_60)) { return false; }

  boolean result = false;

  if (FUNC_INIT == function) {
    Am2320Detect();
  }
  else if (am2320_found) {
    switch (function) {
      case FUNC_EVERY_SECOND:
        Am2320EverySecond();
        break;
      case FUNC_JSON_APPEND:
        Am2320Show(1);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
        Am2320Show(0);
        break;
#endif  // USE_WEBSERVER
    }
  }
  return result;
}

#endif  // USE_AM2320
#endif  // USE_I2C