Mirror of arendst/Tasmota@github.com - Open-source firmware for ESP8266/8285/32-based smart home products
Go to file
Adrian Scillato 3373fff9eb
Added Commands KNX_GA and KNX_CB
* Added command KNX_GA so as to setup Group Address to Send Data/Commands

Usage:

KNX_GA
(return the amount of GA configured)

KNX_GA 1
(return the configuration of the GA#1

KNX_GAx option, area, line, member
(Set the configuration of the GA#x)

example: KNX_GA3 1, 2,2,4

For the GA#3, the status of Relay 1 is sent to 2.2.4

* Added command KNX_CB so as to setup Group Address to Receive Data/Commands

KNX_CBx option, area, line, member

example: KNX_CB2 1, 2,2,4

For the CB#2, listen to 2.2.4 to set the status of the Relay 1


Posible values of the parameter OPTION:

1 - Relay 1
2 - Relay 2
3 - Relay 3
4 - Relay 4
5 - Relay 5
6 - Relay 6
7 - Relay 7
8 - Relay 8
9 - Button 1
10 - Button 2
11 - Button 3
12 - Button 4
13 - Button 5
14 - Button 6
15 - Button 7
16 - Button 8
17 - TEMPERATURE        
18 - HUMIDITY           
19 - ENERGY_VOLTAGE     
20 - ENERGY_CURRENT     
21 - ENERGY_POWER       
22 - ENERGY_POWERFACTOR 
23 - ENERGY_DAILY       
24 - ENERGY_START       
25 - ENERGY_TOTAL       
26 - KNX_SLOT1              
27 - KNX_SLOT2              
28 - KNX_SLOT3              
29 - KNX_SLOT4              
30 - KNX_SLOT5              
255 - EMPTY
2018-07-23 04:03:57 -03:00
.github Update Feature Request Formatting 2018-06-08 18:48:25 -03:00
api Add program to decode some status messages 2018-05-19 17:31:55 +02:00
arduino Add esp8266/Arduino 2.4.1 support 2018-03-10 13:05:31 +01:00
lib ESP-KNX-IP Library - Correct invalid keywords.txt KEYWORD_TOKENTYPE 2018-07-22 22:37:22 -03:00
pio Add platformio floats removal 2018-02-03 16:36:25 +01:00
sonoff Added Commands KNX_GA and KNX_CB 2018-07-23 04:03:57 -03:00
tools Add checks 2018-07-17 16:07:03 +02:00
.gitattributes Fix xsns_26_lm75ad.ino line endings 2018-06-25 17:35:42 +02:00
.gitignore v5.14.0a - Sync with release 2018-05-15 17:13:51 +02:00
.travis.yml v5.1.4 2017-06-01 17:37:30 +02:00
Doxyfile Doxygen configuration file and helper script. 2018-06-23 03:41:36 +02:00
LICENSE.txt v5.1.0 2017-05-13 13:02:10 +02:00
README.md Revisit Timers off/on 2018-07-20 16:12:37 +02:00
esp8266.flash.1m0.ld Add 1M flash with no spiffs linker script 2017-04-25 18:16:40 +02:00
platformio.ini Updated to v6.1.0a 2018-07-06 18:00:50 +02:00
updateDocs.sh Doxygen configuration file and helper script. 2018-06-23 03:41:36 +02:00

README.md

Sonoff-Tasmota

Alternative firmware for ESP8266 based devices like iTead Sonoff with web, timers, 'Over The Air' (OTA) firmware updates and sensors support, allowing control under Serial, HTTP, MQTT and KNX, so as to be used on Smart Home Systems. Written for Arduino IDE and PlatformIO.

GitHub version GitHub download License

If you like Sonoff-Tasmota, give it a star, or fork it and contribute!

GitHub stars GitHub forks donate

Development

Build Status

Current version is 6.1.1c - See sonoff/_releasenotes.ino for release information and sonoff/_changelog.ino for change information.

Disclaimer

⚠️ DANGER OF ELECTROCUTION ⚠️

A Sonoff device is not a toy. It uses Mains AC so there is a danger of electrocution if not installed properly. If you don't know how to install it, please call an electrician. Remember: SAFETY FIRST. It is not worth to risk yourself, your family and your home if you don't know exactly what you are doing. Never try to flash a Sonoff device while it is connected to MAINS AC.

We don't take any responsibility nor liability for using this software nor for the installation or any tips, advice, videos, etc. given by any member of this site or any related site.

Quick Install

Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as documented in the wiki.

Important User Compilation Information

If you want to compile Sonoff-Tasmota yourself keep in mind the following:

  • Only Flash Mode DOUT is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See Wiki for background information.
  • Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs 1M (no SPIFFS) for optimal code space. If you compile using ESP/Arduino library 2.3.0 then download the provided new linker script to your Arduino IDE or Platformio base folder. Later version of ESP/Arduino library already contain the correct linker script. See Wiki > Prerequisite.
  • To make compile time changes to Sonoff-Tasmota it can use the user_config_override.h file. It assures keeping your settings when you download and compile a new version. To use user_config.override.h you will have to make a copy of the provided user_config.override_sample.h file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the user_config_override_sample.h file.

Version Information

  • Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
  • Once uploaded select module using the configuration webpage or the commands Modules and Module.
  • After reboot select config menu again or use commands GPIOs and GPIO to change GPIO with desired sensor.

Migration Information

See wiki migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.x

Support Information

See Wiki for more information.
See Community for forum and more user experience.

The following devices are supported:

Firmware Release Information

Different firmware images are released based on Features and Sensors selection guided by code and memory usage.

  • The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter.
  • The Classic version allows single OTA uploads as did the previous Sonoff-Tasmota versions.

Available Features and Sensors

Feature or Sensor sonoff classic minimal knx allsensors
MY_LANGUAGE en-GB x x x x x
MQTT_LIBRARY_TYPE PUBSUBCLIENT x x x x x
USE_DOMOTICZ x x - x x
USE_HOME_ASSISTANT x x - x x
USE_MQTT_TLS - - - - -
USE_KNX - - - x -
USE_WEBSERVER x x x x x
USE_EMULATION x x - - x
USE_DISCOVERY x x - x x
WEBSERVER_ADVERTISE x x - x x
MQTT_HOST_DISCOVERY x x - x x
USE_TIMERS x - - x x
USE_TIMERS_WEB x - - x x
USE_SUNRISE x - - x x
USE_RULES x - - x x
USE_ADC_VCC x x x x x
USE_DS18B20 x x - x -
USE_DS18x20 - - - - x
USE_DS18x20_LEGACY - - - - -
USE_I2C x x - x x
USE_SHT x x - x x
USE_SHT3X x x - x x
USE_HTU x x - x x
USE_LM75AD x - - x x
USE_BMP x x - x x
USE_BME680 - - - - x
USE_SGP30 x - - x x
USE_BH1750 x x - x x
USE_VEML6070 - - - - x
USE_TSL2561 - - - - x
USE_SI1145 - - - - x
USE_ADS1115 - - - - x
USE_ADS1115_I2CDEV - - - - -
USE_INA219 - - - - x
USE_MGS - - - - x
USE_SPI - - - - -
USE_MHZ19 x x - x x
USE_SENSEAIR x - - x x
USE_PMS5003 x - - x x
USE_NOVA_SDS x - - x x
USE_PZEM004T x - - x x
USE_SERIAL_BRIDGE x - - x x
USE_SDM120 - - - - x
USE_SDM630 - - - - x
USE_IR_REMOTE x x - x x
USE_IR_HVAC - - - - x
USE_IR_RECEIVE x - - x x
USE_WS2812 x x - x x
USE_WS2812_DMA - - - - -
USE_ARILUX_RF x - - x x
USE_SR04 x - - x x
USE_RF_FLASH x - - x x

Typical file size

ESP/Arduino library version sonoff classic minimal knx allsensors
ESP/Arduino lib v2.3.0 538k 490k 407k 548k 562k
ESP/Arduino lib v2.4.0 543k 498k 414k 553k 565k
ESP/Arduino lib v2.4.1 544k 500k 416k 555k 567k

See Tasmota ESP/Arduino library version related issues for more information.

Contribute

You can contribute to Sonoff-Tasmota by

  • providing Pull Requests (Features, Proof of Concepts, Language files or Fixes)
  • testing new released features and report issues
  • donating to acquire hardware for testing and implementing or out of gratitude

donate

Credits

Libraries Used

Libraries used with Sonoff-Tasmota are:

People inspiring me

People helping to keep the show on the road:

  • David Lang providing initial issue resolution and code optimizations
  • Heiko Krupp for his IRSend, HTU21, SI70xx and Wemo/Hue emulation drivers
  • Wiktor Schmidt for Travis CI implementation
  • Thom Dietrich for PlatformIO optimizations
  • Marinus van den Broek for his EspEasy groundwork
  • Pete Ba for more user friendly energy monitor calibration
  • Lobradov providing compile optimization tips
  • Flexiti for his initial timer implementation
  • reloxx13 for his TasmoAdmin management tool
  • Joachim Banzhaf for his TSL2561 library and driver
  • Gijs Noorlander for his MHZ19 and SenseAir drivers
  • Emontnemery for his HomeAssistant Discovery concept and many code tuning tips
  • Aidan Mountford for his HSB support
  • Daniel Ztolnai for his Serial Bridge implementation
  • Gerhard Mutz for his SGP30 and Sunrise/Sunset driver
  • Nuno Ferreira for his HC-SR04 driver
  • Adrian Scillato for his (security)fixes and implementing and maintaining KNX
  • Gennaro Tortone for implementing and maintaining Eastron drivers
  • Raymond Mouthaan for managing Wemos Wiki information
  • Norbert Richter, Frogmore42 and Jason2866 for providing many issue answers
  • Many more providing Tips, Pocs or PRs

License

This program is licensed under GPL-3.0