mirror of https://github.com/arendst/Tasmota.git
80 lines
2.0 KiB
C++
80 lines
2.0 KiB
C++
#include <SPI.h>
|
|
#include <Wire.h>
|
|
#include <Adafruit_GFX.h>
|
|
#include <Adafruit_SSD1306.h>
|
|
|
|
Adafruit_SSD1306 display = Adafruit_SSD1306(128, 32, &Wire);
|
|
|
|
// OLED FeatherWing buttons map to different pins depending on board:
|
|
#if defined(ESP8266)
|
|
#define BUTTON_A 0
|
|
#define BUTTON_B 16
|
|
#define BUTTON_C 2
|
|
#elif defined(ESP32)
|
|
#define BUTTON_A 15
|
|
#define BUTTON_B 32
|
|
#define BUTTON_C 14
|
|
#elif defined(ARDUINO_STM32_FEATHER)
|
|
#define BUTTON_A PA15
|
|
#define BUTTON_B PC7
|
|
#define BUTTON_C PC5
|
|
#elif defined(TEENSYDUINO)
|
|
#define BUTTON_A 4
|
|
#define BUTTON_B 3
|
|
#define BUTTON_C 8
|
|
#elif defined(ARDUINO_FEATHER52832)
|
|
#define BUTTON_A 31
|
|
#define BUTTON_B 30
|
|
#define BUTTON_C 27
|
|
#else // 32u4, M0, M4, nrf52840 and 328p
|
|
#define BUTTON_A 9
|
|
#define BUTTON_B 6
|
|
#define BUTTON_C 5
|
|
#endif
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
Serial.println("OLED FeatherWing test");
|
|
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
|
|
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x32
|
|
|
|
Serial.println("OLED begun");
|
|
|
|
// Show image buffer on the display hardware.
|
|
// Since the buffer is intialized with an Adafruit splashscreen
|
|
// internally, this will display the splashscreen.
|
|
display.display();
|
|
delay(1000);
|
|
|
|
// Clear the buffer.
|
|
display.clearDisplay();
|
|
display.display();
|
|
|
|
Serial.println("IO test");
|
|
|
|
pinMode(BUTTON_A, INPUT_PULLUP);
|
|
pinMode(BUTTON_B, INPUT_PULLUP);
|
|
pinMode(BUTTON_C, INPUT_PULLUP);
|
|
|
|
// text display tests
|
|
display.setTextSize(1);
|
|
display.setTextColor(WHITE);
|
|
display.setCursor(0,0);
|
|
display.print("Connecting to SSID\n'adafruit':");
|
|
display.print("connected!");
|
|
display.println("IP: 10.0.1.23");
|
|
display.println("Sending val #0");
|
|
display.setCursor(0,0);
|
|
display.display(); // actually display all of the above
|
|
}
|
|
|
|
void loop() {
|
|
if(!digitalRead(BUTTON_A)) display.print("A");
|
|
if(!digitalRead(BUTTON_B)) display.print("B");
|
|
if(!digitalRead(BUTTON_C)) display.print("C");
|
|
delay(10);
|
|
yield();
|
|
display.display();
|
|
}
|