mirror of https://github.com/arendst/Tasmota.git
211 lines
9.9 KiB
INI
211 lines
9.9 KiB
INI
; *** Example PlatformIO Project Configuration Override File ***
|
|
; *** Changes done here override settings in platformio.ini ***
|
|
;
|
|
; *****************************************************************
|
|
; *** to activate rename this file to platformio_override.ini ***
|
|
; *****************************************************************
|
|
;
|
|
; Please visit documentation for the options and examples
|
|
; http://docs.platformio.org/en/stable/projectconf.html
|
|
|
|
[platformio]
|
|
; For best Gitpod performance remove the ";" in the next line. Needed Platformio files are cached and installed at first run
|
|
;core_dir = .platformio
|
|
extra_configs = platformio_tasmota_cenv.ini
|
|
|
|
; *** Build/upload environment
|
|
default_envs =
|
|
; *** Uncomment the line(s) below to select version(s)
|
|
tasmota
|
|
; tasmota-debug
|
|
; tasmota-ircustom
|
|
; tasmota-minimal
|
|
; tasmota-lite
|
|
; tasmota-knx
|
|
; tasmota-sensors
|
|
; tasmota-display
|
|
; tasmota-zbbridge
|
|
; tasmota-ir
|
|
; tasmota32
|
|
; tasmota32-bluetooth
|
|
; tasmota32-webcam
|
|
; tasmota32-knx
|
|
; tasmota32-sensors
|
|
; tasmota32-display
|
|
; tasmota32-ir
|
|
; tasmota32-ircustom
|
|
; tasmota32solo1
|
|
; tasmota32s2
|
|
; tasmota32-odroidgo
|
|
; tasmota32-core2
|
|
|
|
|
|
[common]
|
|
platform_packages = ${core.platform_packages}
|
|
build_unflags = ${core.build_unflags}
|
|
build_flags = ${core.build_flags}
|
|
; *** Optional Debug messages
|
|
; -DDEBUG_TASMOTA_CORE
|
|
; -DDEBUG_TASMOTA_DRIVER
|
|
; -DDEBUG_TASMOTA_SENSOR
|
|
|
|
; *** CAUTION *** This setting is ONLY possible since 12.01.2021 with development version !!!
|
|
; *** Enable only if you exactly know what are you doing
|
|
; *** If you try with earlier builds a serial erase and flash is probably needed
|
|
;
|
|
; Build variant 1MB = 1MB firmware no filesystem (default)
|
|
;board_build.ldscript = eagle.flash.1m.ld
|
|
; Build variant 2MB = 1MB firmware, +744k OTA, 256k filesystem (Zigbee Bridge, most Shelly devices)
|
|
;board_build.ldscript = eagle.flash.2m256.ld
|
|
; Build variant 4MB = 1MB firmware, +1MB OTA, 2MB filesystem (WEMOS D1 Mini, NodeMCU, Sonoff POW)
|
|
;board_build.ldscript = eagle.flash.4m2m.ld
|
|
; Build variant 16MB = 1MB firmware, +1MB OTA, 14MB filesystem (WEMOS D1 Mini pro, Ledunia (=32MB))
|
|
;board_build.ldscript = eagle.flash.16m14m.ld
|
|
|
|
; set CPU frequency to 80MHz (default) or 160MHz
|
|
;board_build.f_cpu = 160000000L
|
|
|
|
; set Flash chip frequency to 40MHz (default), 20MHz, 26Mhz, 80Mhz
|
|
;board_build.f_flash = 20000000L
|
|
;board_build.f_flash = 26000000L
|
|
;board_build.f_flash = 80000000L
|
|
|
|
; *** Upload Serial reset method for Wemos and NodeMCU
|
|
upload_port = COM5
|
|
|
|
extra_scripts = ${scripts_defaults.extra_scripts}
|
|
; pio-tools/obj-dump.py
|
|
|
|
lib_extra_dirs = ${library.lib_extra_dirs}
|
|
|
|
[core]
|
|
; Activate only (one set) if you want to override the standard core defined in platformio.ini !!!
|
|
|
|
;platform_packages = ${tasmota_stage.platform_packages}
|
|
;build_unflags = ${tasmota_stage.build_unflags}
|
|
;build_flags = ${tasmota_stage.build_flags}
|
|
|
|
;platform_packages = ${core_stage.platform_packages}
|
|
;build_unflags = ${core_stage.build_unflags}
|
|
;build_flags = ${core_stage.build_flags}
|
|
|
|
|
|
[tasmota_stage]
|
|
; *** Esp8266 core for Arduino version Tasmota stage. Backport for PWM selection
|
|
platform_packages = tasmota/framework-arduinoespressif8266 @ ~2.7.4
|
|
build_unflags = ${esp_defaults.build_unflags}
|
|
build_flags = ${esp82xx_defaults.build_flags}
|
|
; *** Use ONE of the two PWM variants. Tasmota default is Locked PWM
|
|
;-DWAVEFORM_LOCKED_PHASE
|
|
-DWAVEFORM_LOCKED_PWM
|
|
|
|
[core_stage]
|
|
; *** Esp8266 core for Arduino version stage
|
|
platform_packages = framework-arduinoespressif8266 @ https://github.com/esp8266/Arduino.git
|
|
; *** Use Xtensa build chain 10.2. GNU13 from https://github.com/earlephilhower/esp-quick-toolchain
|
|
mcspr/toolchain-xtensa @ 5.100200.201223
|
|
build_unflags = ${esp_defaults.build_unflags}
|
|
-Wswitch-unreachable
|
|
build_flags = ${esp82xx_defaults.build_flags}
|
|
; *** Use ONE of the two PWM variants. Tasmota default is Locked PWM
|
|
;-DWAVEFORM_LOCKED_PHASE
|
|
-DWAVEFORM_LOCKED_PWM
|
|
-Wno-switch-unreachable
|
|
|
|
[common32]
|
|
platform_packages = ${core32.platform_packages}
|
|
build_unflags = ${core32.build_unflags}
|
|
build_flags = ${core32.build_flags}
|
|
upload_port = COM4
|
|
lib_extra_dirs = ${library.lib_extra_dirs}
|
|
; *** ESP32 lib. ALWAYS needed for ESP32 !!!
|
|
lib/libesp32
|
|
; *** uncomment the following line if you want to use Bluetooth or Apple Homekit in a Tasmota32 build
|
|
; lib/libesp32_div
|
|
; *** uncomment the following line if you want to use Epaper driver epidy in your Tasmota32 build
|
|
; lib/libesp32_epdiy
|
|
|
|
[core32]
|
|
; Activate Stage Core32 by removing ";" in next 3 lines, if you want to override the standard core32
|
|
;platform_packages = ${core32_stage.platform_packages}
|
|
;build_unflags = ${core32_stage.build_unflags}
|
|
;build_flags = ${core32_stage.build_flags}
|
|
|
|
[core32_stage]
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git
|
|
platformio/tool-mklittlefs @ ~1.203.200522
|
|
build_unflags = ${esp32_defaults.build_unflags}
|
|
build_flags = ${esp32_defaults.build_flags}
|
|
-DESP32_STAGE=true
|
|
|
|
[library]
|
|
shared_libdeps_dir = lib
|
|
; *** Library disable / enable for variant Tasmota(32). Disable reduces compile time
|
|
; *** !!! Disabling needed libs will generate compile errors !!!
|
|
; *** The resulting firmware will NOT be different if you leave all libs enabled
|
|
; *** Disabling by putting a ";" in front of the lib name
|
|
; *** If you dont know what it is all about, do not change
|
|
lib_extra_dirs =
|
|
; *** Only disabled for Tasmota minimal and Tasmota light. For all other variants needed!
|
|
lib/lib_basic
|
|
; **** I2C devices. Most sensors. Disable only if you dont have ANY I2C device enabled
|
|
lib/lib_i2c
|
|
; *** Displays. Disable if you dont have any Display activated
|
|
lib/lib_display
|
|
; *** Bear SSL and base64. Disable if you dont have SSL or TLS activated
|
|
lib/lib_ssl
|
|
; *** Audio needs a lot of time to compile. Mostly not used functions. Recommended to disable
|
|
lib/lib_audio
|
|
; *** RF 433 stuff (not RF Bridge). Recommended to disable
|
|
lib/lib_rf
|
|
; *** Mostly not used functions. Recommended to disable
|
|
lib/lib_div
|
|
|
|
; *** EXPERIMENTAL Tasmota version for ESP32solo1 (used in some Xiaomi devices)
|
|
[env:tasmota32solo1]
|
|
extends = env:tasmota32_base
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/Jason2866/esp32-arduino-lib-builder/raw/framework-arduinoespressif32/framework-arduinoespressif32-release_v3.3-solo1-bd65eb8d1.tar.gz
|
|
platformio/tool-mklittlefs @ ~1.203.200522
|
|
platformio/tool-esptoolpy @ ~1.30000.0
|
|
build_unflags = ${esp32_defaults.build_unflags}
|
|
build_flags = ${common32.build_flags}
|
|
|
|
; *** EXPERIMENTAL Tasmota version for ESP32-S2
|
|
[env:tasmota32s2]
|
|
extends = env:tasmota32_base
|
|
board = esp32s2
|
|
board_build.flash_mode = qio
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/Jason2866/arduino-esp32/releases/download/esp32-2.0.0-pre/esp32-2.0.0-pre.zip
|
|
platformio/tool-mklittlefs @ ~1.203.200522
|
|
platformio/tool-esptoolpy @ ~1.30000.0
|
|
build_unflags = ${esp32_defaults.build_unflags}
|
|
build_flags = ${common32.build_flags}
|
|
lib_ignore =
|
|
NimBLE-Arduino
|
|
Micro-RTSP
|
|
ESP32 Ethernet
|
|
|
|
; *** EXPERIMENTAL Tasmota version for Arduino ESP32 IDF4.4. Linking not working.
|
|
[env:tasmota32idf4]
|
|
extends = env:tasmota32_base
|
|
platform = https://github.com/Jason2866/platform-espressif32.git#feature/arduino-idf-v4.4
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/Jason2866/arduino-esp32/releases/download/esp32-2.0.0-pre/esp32-2.0.0-pre.zip
|
|
platformio/tool-mklittlefs @ ~1.203.200522
|
|
build_unflags = ${esp32_defaults.build_unflags}
|
|
build_flags = ${esp32_defaults.build_flags}
|
|
;-DESP32_STAGE=true
|
|
|
|
; *** Debug version used for PlatformIO Home Project Inspection
|
|
[env:tasmota-debug]
|
|
build_type = debug
|
|
build_unflags = ${esp_defaults.build_unflags}
|
|
build_flags = ${esp82xx_defaults.build_flags}
|
|
; -Wstack-usage=300
|
|
|
|
[env:tasmota32-debug]
|
|
extends = env:tasmota32_base
|
|
build_type = debug
|
|
build_unflags = ${esp32_defaults.build_unflags}
|
|
build_flags = ${esp32_defaults.build_flags}
|
|
; -Wstack-usage=300
|