Tasmota/sonoff/sonoff_template.h

251 lines
9.3 KiB
C

/*********************************************************************************************\
* Template parameters
\*********************************************************************************************/
#define GPIO_SENSOR_START 0
#define GPIO_NONE 0 // Not used
#define GPIO_DHT11 1 // DHT11
#define GPIO_DHT21 2 // DHT21
#define GPIO_AM2301 2 // AM2301
#define GPIO_DHT22 3 // DHT22
#define GPIO_AM2302 3 // AM2302
#define GPIO_AM2321 3 // AM2321
#define GPIO_DSB 4 // Single wire DS18B20 or DS18S20
#define GPIO_I2C_SCL 5 // I2C SCL
#define GPIO_I2C_SDA 6 // I2C SDA
#define GPIO_WS2812 7 // WS2812 Led string
#define GPIO_SWT1 8 // User connected external switches
#define GPIO_SENSOR_END 9
#define GPIO_SWT2 9
#define GPIO_SWT3 10
#define GPIO_SWT4 11
#define GPIO_KEY1 12 // Button usually connected to GPIO0
#define GPIO_KEY2 13
#define GPIO_KEY3 14
#define GPIO_KEY4 15
#define GPIO_REL1 16 // Relays
#define GPIO_REL2 17
#define GPIO_REL3 18
#define GPIO_REL4 19
#define GPIO_REL1_INV 20
#define GPIO_REL2_INV 21
#define GPIO_REL3_INV 22
#define GPIO_REL4_INV 23
#define GPIO_LED1 24 // Leds
#define GPIO_LED2 25
#define GPIO_LED3 26
#define GPIO_LED4 27
#define GPIO_LED1_INV 28
#define GPIO_LED2_INV 29
#define GPIO_LED3_INV 30
#define GPIO_LED4_INV 31
#define GPIO_PWM0 32 // Cold
#define GPIO_PWM1 33 // Warm
#define GPIO_PWM2 34 // Red (swapped with Blue from original)
#define GPIO_PWM3 35 // Green
#define GPIO_PWM4 36 // Blue (swapped with Red from original)
#define GPIO_RXD 37 // Serial interface
#define GPIO_TXD 38 // Serial interface
#define GPIO_HLW_SEL 39 // HLW8012 Sel output (Sonoff Pow)
#define GPIO_HLW_CF1 40 // HLW8012 CF1 voltage / current (Sonoff Pow)
#define GPIO_HLW_CF 41 // HLW8012 CF power (Sonoff Pow)
#define GPIO_USER 42 // User configurable
#define GPIO_MAX 43
/********************************************************************************************/
enum module_t {SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, S20, SLAMPHER, SONOFF_TOUCH, SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, USER_TEST, MAXMODULE};
/********************************************************************************************/
#define MAX_GPIO_PIN 17 // Number of supported GPIO
#define DHT11 11
#define DHT21 21
#define AM2301 21
#define DHT22 22
#define AM2302 22
#define AM2321 22
typedef struct MYIO {
uint8_t io[MAX_GPIO_PIN];
} myio;
typedef struct MYTMPLT {
char name[16];
myio gp;
} mytmplt;
const char sensors[GPIO_SENSOR_END][8] PROGMEM =
{ "None", "DHT11", "AM2301", "DHT22", "DS18x20", "I2C SCL", "I2C SDA", "WS2812", "Switch" };
const mytmplt modules[MAXMODULE] PROGMEM = {
{ "Sonoff Basic", // Sonoff Basic
GPIO_KEY1, // GPIO00 Button
0, 0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0
},
{ "Sonoff RF", // Sonoff RF
GPIO_KEY1, // GPIO00 Button
0, 0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0
},
{ "Sonoff SV", // Sonoff SV
GPIO_KEY1, // GPIO00 Button
0, 0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0
},
{ "Sonoff TH", // Sonoff TH10/16
GPIO_KEY1, // GPIO00 Button
0, 0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0
},
{ "Sonoff Dual", // Sonoff Dual
0,
GPIO_TXD, // GPIO01 Relay control
0,
GPIO_RXD, // GPIO03 Relay control
0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0
},
{ "Sonoff Pow", // Sonoff Pow
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0,
GPIO_HLW_SEL, // GPIO05 HLW8012 Sel output
0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_HLW_CF1, // GPIO13 HLW8012 CF1 voltage / current
GPIO_HLW_CF, // GPIO14 HLW8012 CF power
GPIO_LED1, // GPIO15 Green Led (0 = On, 1 = Off)
0
},
{ "Sonoff 4CH", // Sonoff 4CH
GPIO_KEY1, // GPIO00 Button 1
0,
GPIO_USER, // GPIO02 Optional sensor
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
0, 0, 0,
GPIO_KEY2, // GPIO09 Button 2
GPIO_KEY3, // GPIO10 Button 3
0,
GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_KEY4, // GPIO14 Button 4
GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
0
},
{ "S20 Socket", // S20 Smart Socket
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0
},
{ "Slampher", // Slampher
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0
},
{ "Sonoff Touch", // Sonoff Touch
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0
},
{ "Sonoff LED", // Sonoff LED
GPIO_KEY1, // GPIO00 Button
0, 0, 0,
GPIO_PWM3, // GPIO04 Green light
GPIO_PWM2, // GPIO05 Red light
0, 0, 0, 0, 0, 0,
GPIO_PWM0, // GPIO12 Cold light
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
GPIO_PWM1, // GPIO14 Warm light
GPIO_PWM4, // GPIO15 Blue light
0
},
{ "1 Channel", // 1 Channel Inching/Latching Relay
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0
},
{ "4 Channel", // 4 Channel Inching/Latching Relays
0,
GPIO_TXD, // GPIO01 Relay control
0,
GPIO_RXD, // GPIO03 Relay control
0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0
},
{ "Motor C/AC", // Motor Clockwise / Anti clockwise
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0
},
{ "ElectroDragon", // ElectroDragon IoT Relay Board
GPIO_KEY2, // GPIO00 Button 2
0,
GPIO_KEY1, // GPIO02 Button 1
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0, 0, 0, 0, 0, 0, 0,
GPIO_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On)
GPIO_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On)
GPIO_USER, // GPIO14 Optional sensor
0,
GPIO_LED1 // GPIO16 Green/Blue Led (1 = On, 0 = Off)
},
{ "User Test", // Sonoff Basic User Test
GPIO_KEY1, // GPIO00 Button
0,
GPIO_USER, // GPIO02 Optional sensor
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, 0, 0, 0,
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0
}
};