mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/sonoff/xsns_htu21.ino

296 lines
8.1 KiB
C++
Raw Blame History

/*
Copyright (c) 2017 Heiko Krupp. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef USE_I2C
#ifdef USE_HTU
/*********************************************************************************************\
* HTU21 - Temperature and Humidy
*
* Source: Heiko Krupp
\*********************************************************************************************/
#define HTU21_ADDR 0x40
#define SI7013_CHIPID 0x0D
#define SI7020_CHIPID 0x14
#define SI7021_CHIPID 0x15
#define HTU21_CHIPID 0x32
#define HTU21_READTEMP 0xE3
#define HTU21_READHUM 0xE5
#define HTU21_WRITEREG 0xE6
#define HTU21_READREG 0xE7
#define HTU21_RESET 0xFE
#define HTU21_HEATER_WRITE 0x51
#define HTU21_HEATER_READ 0x11
#define HTU21_SERIAL2_READ1 0xFC /* Read 3rd two Serial bytes */
#define HTU21_SERIAL2_READ2 0xC9 /* Read 4th two Serial bytes */
#define HTU21_HEATER_ON 0x04
#define HTU21_HEATER_OFF 0xFB
#define HTU21_RES_RH12_T14 0x00 // Default
#define HTU21_RES_RH8_T12 0x01
#define HTU21_RES_RH10_T13 0x80
#define HTU21_RES_RH11_T11 0x81
#define HTU21_CRC8_POLYNOM 0x13100
uint8_t htuaddr, htutype = 0;
uint8_t delayT, delayH = 50;
char htustype[7];
uint8_t check_crc8(uint16_t data)
{
for (uint8_t bit = 0; bit < 16; bit++)
{
if (data & 0x8000)
data = (data << 1) ^ HTU21_CRC8_POLYNOM;
else
data <<= 1;
}
return data >>= 8;
}
uint8_t htu21_readDeviceID(void)
{
uint16_t deviceID = 0;
uint8_t checksum = 0;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_SERIAL2_READ1);
Wire.write(HTU21_SERIAL2_READ2);
Wire.endTransmission();
Wire.requestFrom(HTU21_ADDR, 3);
deviceID = Wire.read() << 8;
deviceID |= Wire.read();
checksum = Wire.read();
if (check_crc8(deviceID) == checksum) {
deviceID = deviceID >> 8;
} else {
deviceID = 0;
}
return (uint8_t)deviceID;
}
void htu21_setRes(uint8_t resolution)
{
uint8_t current = i2c_read8(HTU21_ADDR, HTU21_READREG);
current &= 0x7E; // Replace current resolution bits with 0
current |= resolution; // Add new resolution bits to register
i2c_write8(HTU21_ADDR, HTU21_WRITEREG, current);
}
void htu21_reset(void)
{
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_RESET);
Wire.endTransmission();
delay(15); // Reset takes 15ms
}
void htu21_heater(uint8_t heater)
{
uint8_t current = i2c_read8(HTU21_ADDR, HTU21_READREG);
switch(heater)
{
case HTU21_HEATER_ON : current |= heater;
break;
case HTU21_HEATER_OFF : current &= heater;
break;
default : current &= heater;
break;
}
i2c_write8(HTU21_ADDR, HTU21_WRITEREG, current);
}
boolean htu21_init()
{
htu21_reset();
htu21_heater(HTU21_HEATER_OFF);
htu21_setRes(HTU21_RES_RH12_T14);
return true;
}
float htu21_convertCtoF(float c)
{
return c * 1.8 + 32;
}
float htu21_readHumidity(void)
{
uint8_t checksum=0;
uint16_t sensorval=0;
float humidity=0.0;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_READHUM);
if(Wire.endTransmission() != 0) return 0.0; // In case of error
delay(delayH); // Sensor time at max resolution
Wire.requestFrom(HTU21_ADDR, 3);
if(3 <= Wire.available())
{
sensorval = Wire.read() << 8; // MSB
sensorval |= Wire.read(); // LSB
checksum = Wire.read();
}
if(check_crc8(sensorval) != checksum) return 0.0; // Checksum mismatch
sensorval ^= 0x02; // clear status bits
humidity = 0.001907 * (float)sensorval - 6;
if(humidity > 100) return 100.0;
if(humidity < 0) return 0.01;
return humidity;
}
float htu21_readTemperature(bool S)
{
uint8_t checksum=0;
uint16_t sensorval=0;
float t;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_READTEMP);
if(Wire.endTransmission() != 0) return 0.0; // In case of error
delay(delayT); // Sensor time at max resolution
Wire.requestFrom(HTU21_ADDR, 3);
if(3 == Wire.available())
{
sensorval = Wire.read() << 8; // MSB
sensorval |= Wire.read(); // LSB
checksum = Wire.read();
}
if(check_crc8(sensorval) != checksum) return 0.0; // Checksum mismatch
t = (0.002681 * (float)sensorval - 46.85);
if(S) t = htu21_convertCtoF(t);
return t;
}
float htu21_compensatedHumidity(float humidity, float temperature)
{
if(humidity == 0.00 && temperature == 0.00) return 0.0;
if(temperature > 0.00 && temperature < 80.00)
return (-0.15)*(25-temperature)+humidity;
}
uint8_t htu_detect()
{
if (htutype) return true;
char log[LOGSZ];
boolean success = false;
htuaddr = HTU21_ADDR;
htutype = htu21_readDeviceID();
success = htu21_init();
switch (htutype) {
case HTU21_CHIPID:
strcpy_P(htustype, PSTR("HTU21"));
delayT=50;
delayH=16;
break;
case SI7013_CHIPID:
strcpy_P(htustype, PSTR("SI7013"));
delayT=12;
delayH=23;
break;
case SI7020_CHIPID:
strcpy_P(htustype, PSTR("SI7020"));
delayT=12;
delayH=23;
break;
case SI7021_CHIPID:
strcpy_P(htustype, PSTR("SI7021"));
delayT=12;
delayH=23;
break;
default:
strcpy_P(htustype, PSTR("T/RH?"));
delayT=50;
delayH=23;
}
if (success) {
snprintf_P(log, sizeof(log), PSTR("I2C: %s found at address 0x%x"), htustype, htuaddr);
addLog(LOG_LEVEL_DEBUG, log);
} else {
htutype = 0;
}
return success;
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
void htu_mqttPresent(char* svalue, uint16_t ssvalue, uint8_t* djson)
{
if (!htutype) return;
char stemp1[10], stemp2[10];
float t = htu21_readTemperature(TEMP_CONVERSION);
float h = htu21_readHumidity();
h = htu21_compensatedHumidity(h, t);
dtostrf(t, 1, TEMP_RESOLUTION &3, stemp1);
dtostrf(h, 1, HUMIDITY_RESOLUTION &3, stemp2);
snprintf_P(svalue, ssvalue, PSTR("%s, \"%s\":{\"Temperature\":%s, \"Humidity\":%s}"),
svalue, htustype, stemp1, stemp2);
*djson = 1;
#ifdef USE_DOMOTICZ
domoticz_sensor2(stemp1, stemp2);
#endif // USE_DOMOTICZ
}
#ifdef USE_WEBSERVER
String htu_webPresent()
{
String page = "";
if (htutype) {
char stemp[10], sensor[128];
float t_htu21 = htu21_readTemperature(TEMP_CONVERSION);
float h_htu21 = htu21_readHumidity();
h_htu21 = htu21_compensatedHumidity(h_htu21, t_htu21);
dtostrf(t_htu21, 1, TEMP_RESOLUTION &3, stemp);
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_TEMP, htustype, stemp, (TEMP_CONVERSION) ? 'F' : 'C');
page += sensor;
dtostrf(h_htu21, 1, HUMIDITY_RESOLUTION &3, stemp);
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_HUM, htustype, stemp);
page += sensor;
}
return page;
}
#endif // USE_WEBSERVER
#endif // USE_HTU
#endif // USE_I2C
Reference in New Issue View Git Blame Copy Permalink