mirror of https://github.com/arendst/Tasmota.git
605 lines
20 KiB
C++
605 lines
20 KiB
C++
/*
|
|
xsns_40_pn532.ino - Support for PN532 (I2C) NFC Tag Reader
|
|
|
|
Copyright (C) 2019 Andre Thomas and Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_I2C
|
|
#ifdef USE_PN532_I2C
|
|
|
|
/*********************************************************************************************\
|
|
* PN532 - Near Field Communication (NFC) controller
|
|
*
|
|
* Datasheet at https://www.nxp.com/docs/en/nxp/data-sheets/PN532_C1.pdf
|
|
*
|
|
* I2C Address: 0x24
|
|
\*********************************************************************************************/
|
|
|
|
#define XSNS_40 40
|
|
|
|
#define PN532_I2C_ADDRESS 0x24
|
|
|
|
#define PN532_COMMAND_GETFIRMWAREVERSION 0x02
|
|
#define PN532_COMMAND_SAMCONFIGURATION 0x14
|
|
#define PN532_COMMAND_INDATAEXCHANGE 0x40
|
|
#define PN532_COMMAND_INLISTPASSIVETARGET 0x4A
|
|
|
|
#define MIFARE_CMD_READ 0x30
|
|
#define MIFARE_CMD_AUTH_A 0x60
|
|
#define MIFARE_CMD_AUTH_B 0x61
|
|
#define MIFARE_CMD_WRITE 0xA0
|
|
|
|
#define PN532_PREAMBLE 0x00
|
|
#define PN532_STARTCODE1 0x00
|
|
#define PN532_STARTCODE2 0xFF
|
|
#define PN532_POSTAMBLE 0x00
|
|
|
|
#define PN532_HOSTTOPN532 0xD4
|
|
#define PN532_PN532TOHOST 0xD5
|
|
|
|
#define PN532_INVALID_ACK -1
|
|
#define PN532_TIMEOUT -2
|
|
#define PN532_INVALID_FRAME -3
|
|
#define PN532_NO_SPACE -4
|
|
|
|
#define PN532_MIFARE_ISO14443A 0x00
|
|
|
|
uint8_t pn532_i2c_detected = 0;
|
|
uint8_t pn532_i2c_packetbuffer[64];
|
|
uint8_t pn532_i2c_scan_defer_report = 0; // If a valid card was found we will not scan for one again in the same two seconds so we set this to 19 if a card was found
|
|
uint8_t pn532_i2c_command = 0;
|
|
|
|
uint8_t pn532_i2c_disable = 0;
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
uint8_t pn532_i2c_function = 0;
|
|
uint8_t pn532_i2c_newdata[16];
|
|
uint8_t pn532_i2c_newdata_len = 0;
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
const uint8_t PROGMEM pn532_global_timeout = 10;
|
|
|
|
int16_t PN532_getResponseLength(uint8_t buf[], uint8_t len) {
|
|
const uint8_t PN532_NACK[] = {0, 0, 0xFF, 0xFF, 0, 0};
|
|
uint8_t time = 0;
|
|
do {
|
|
if (Wire.requestFrom(PN532_I2C_ADDRESS, 6)) {
|
|
if (Wire.read() & 1) { // check first byte --- status
|
|
break; // PN532 is ready
|
|
}
|
|
}
|
|
delay(1);
|
|
time++;
|
|
if (time > pn532_global_timeout) {
|
|
return -1;
|
|
}
|
|
} while (1);
|
|
|
|
if ((0x00 != Wire.read()) || (0x00 != Wire.read()) || (0xFF != Wire.read())) { // PREAMBLE || STARTCODE1 || STARTCODE2
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
|
|
uint8_t length = Wire.read();
|
|
|
|
// request for last respond msg again
|
|
Wire.beginTransmission(PN532_I2C_ADDRESS);
|
|
for (uint16_t i = 0;i < sizeof(PN532_NACK); ++i) {
|
|
Wire.write(PN532_NACK[i]);
|
|
}
|
|
Wire.endTransmission();
|
|
return length;
|
|
}
|
|
|
|
|
|
int16_t PN532_readResponse(uint8_t buf[], uint8_t len)
|
|
{
|
|
uint8_t time = 0;
|
|
uint8_t length;
|
|
|
|
length = PN532_getResponseLength(buf, len);
|
|
|
|
// [RDY] 00 00 FF LEN LCS (TFI PD0 ... PDn) DCS 00
|
|
|
|
do {
|
|
if (Wire.requestFrom(PN532_I2C_ADDRESS, 6 + length + 2)) {
|
|
if (Wire.read() & 1) { // check first byte --- status
|
|
break; // PN532 is ready
|
|
}
|
|
}
|
|
delay(1);
|
|
time++;
|
|
if (time > pn532_global_timeout) {
|
|
return -1;
|
|
}
|
|
} while (1);
|
|
|
|
if ((0x00 != Wire.read()) || (0x00 != Wire.read()) || (0xFF != Wire.read())) { // PREAMBLE || STARTCODE1 || STARTCODE2
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
|
|
length = Wire.read();
|
|
|
|
if (0 != (uint8_t)(length + Wire.read())) { // checksum of length
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
|
|
uint8_t cmd = pn532_i2c_command + 1; // response command
|
|
if ((PN532_PN532TOHOST != Wire.read()) || ((cmd) != Wire.read())) {
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
length -= 2;
|
|
if (length > len) {
|
|
return PN532_NO_SPACE; // not enough space
|
|
}
|
|
uint8_t sum = PN532_PN532TOHOST + cmd;
|
|
for (uint8_t i = 0; i < length; i++) {
|
|
buf[i] = Wire.read();
|
|
sum += buf[i];
|
|
}
|
|
uint8_t checksum = Wire.read();
|
|
if (0 != (uint8_t)(sum + checksum)) {
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
Wire.read(); // POSTAMBLE
|
|
return length;
|
|
}
|
|
|
|
|
|
int8_t PN532_readAckFrame(void)
|
|
{
|
|
const uint8_t PN532_ACK[] = {0, 0, 0xFF, 0, 0xFF, 0};
|
|
uint8_t ackBuf[sizeof(PN532_ACK)];
|
|
|
|
uint8_t time = 0;
|
|
|
|
do {
|
|
if (Wire.requestFrom(PN532_I2C_ADDRESS, sizeof(PN532_ACK) + 1)) {
|
|
if (Wire.read() & 1) { // check first byte --- status
|
|
break; // PN532 is ready
|
|
}
|
|
}
|
|
delay(1);
|
|
time++;
|
|
if (time > pn532_global_timeout) { // We time out after 10ms
|
|
return PN532_TIMEOUT;
|
|
}
|
|
} while (1);
|
|
|
|
for (uint8_t i = 0; i < sizeof(PN532_ACK); i++) {
|
|
ackBuf[i] = Wire.read();
|
|
}
|
|
|
|
if (memcmp(ackBuf, PN532_ACK, sizeof(PN532_ACK))) {
|
|
return PN532_INVALID_ACK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int8_t PN532_writeCommand(const uint8_t *header, uint8_t hlen)
|
|
{
|
|
pn532_i2c_command = header[0];
|
|
Wire.beginTransmission(PN532_I2C_ADDRESS);
|
|
Wire.write(PN532_PREAMBLE);
|
|
Wire.write(PN532_STARTCODE1);
|
|
Wire.write(PN532_STARTCODE2);
|
|
uint8_t length = hlen + 1; // TFI + DATA
|
|
Wire.write(length);
|
|
Wire.write(~length + 1); // checksum of length
|
|
Wire.write(PN532_HOSTTOPN532);
|
|
uint8_t sum = PN532_HOSTTOPN532; // Sum of TFI + DATA
|
|
for (uint8_t i = 0; i < hlen; i++) {
|
|
if (Wire.write(header[i])) {
|
|
sum += header[i];
|
|
} else {
|
|
return PN532_INVALID_FRAME;
|
|
}
|
|
}
|
|
uint8_t checksum = ~sum + 1; // Checksum of TFI + DATA
|
|
Wire.write(checksum);
|
|
Wire.write(PN532_POSTAMBLE);
|
|
Wire.endTransmission();
|
|
return PN532_readAckFrame();
|
|
}
|
|
|
|
uint32_t PN532_getFirmwareVersion(void)
|
|
{
|
|
uint32_t response;
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_GETFIRMWAREVERSION;
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 1)) {
|
|
return 0;
|
|
}
|
|
int16_t status = PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer));
|
|
if (0 > status) {
|
|
return 0;
|
|
}
|
|
response = pn532_i2c_packetbuffer[0];
|
|
response <<= 8;
|
|
response |= pn532_i2c_packetbuffer[1];
|
|
response <<= 8;
|
|
response |= pn532_i2c_packetbuffer[2];
|
|
response <<= 8;
|
|
response |= pn532_i2c_packetbuffer[3];
|
|
return response;
|
|
}
|
|
|
|
bool PN532_SAMConfig(void)
|
|
{
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_SAMCONFIGURATION;
|
|
pn532_i2c_packetbuffer[1] = 0x01; // normal mode;
|
|
pn532_i2c_packetbuffer[2] = 0x01; // timeout 50ms * 1 = 50ms
|
|
pn532_i2c_packetbuffer[3] = 0x00; // Disable IRQ pin
|
|
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 4))
|
|
return false;
|
|
|
|
return (0 < PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer)));
|
|
}
|
|
|
|
void PN532_Detect(void)
|
|
{
|
|
if ((pn532_i2c_detected) || (pn532_i2c_disable)) { return; }
|
|
|
|
Wire.setClockStretchLimit(1000); // Enable 1ms clock stretch as per datasheet Table 12.25 (Timing for the I2C interface)
|
|
|
|
uint32_t ver = PN532_getFirmwareVersion();
|
|
if (ver) {
|
|
pn532_i2c_detected = 1;
|
|
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "PN532 NFC Reader (V%u.%u)", PN532_I2C_ADDRESS);
|
|
snprintf_P(log_data, sizeof(log_data), log_data, (ver>>16) & 0xFF, (ver>>8) & 0xFF);
|
|
AddLog(LOG_LEVEL_DEBUG);
|
|
PN532_SAMConfig();
|
|
}
|
|
}
|
|
|
|
bool PN532_readPassiveTargetID(uint8_t cardbaudrate, uint8_t *uid, uint8_t *uidLength)
|
|
{
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_INLISTPASSIVETARGET;
|
|
pn532_i2c_packetbuffer[1] = 1;
|
|
pn532_i2c_packetbuffer[2] = cardbaudrate;
|
|
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 3)) {
|
|
return false; // command failed
|
|
}
|
|
|
|
if (PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer)) < 0) { // No data packet so no tag was found
|
|
Wire.beginTransmission(PN532_I2C_ADDRESS);
|
|
Wire.endTransmission();
|
|
return false;
|
|
}
|
|
|
|
if (pn532_i2c_packetbuffer[0] != 1) { return false; } // Not a valid tag
|
|
|
|
*uidLength = pn532_i2c_packetbuffer[5];
|
|
for (uint8_t i = 0;i < pn532_i2c_packetbuffer[5]; i++) {
|
|
uid[i] = pn532_i2c_packetbuffer[6 + i];
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
|
|
uint8_t mifareclassic_AuthenticateBlock (uint8_t *uid, uint8_t uidLen, uint32_t blockNumber, uint8_t keyNumber, uint8_t *keyData)
|
|
{
|
|
uint8_t i;
|
|
uint8_t _key[6];
|
|
uint8_t _uid[7];
|
|
uint8_t _uidLen;
|
|
|
|
// Hang on to the key and uid data
|
|
memcpy (_key, keyData, 6);
|
|
memcpy (_uid, uid, uidLen);
|
|
_uidLen = uidLen;
|
|
|
|
// Prepare the authentication command //
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE; /* Data Exchange Header */
|
|
pn532_i2c_packetbuffer[1] = 1; /* Max card numbers */
|
|
pn532_i2c_packetbuffer[2] = (keyNumber) ? MIFARE_CMD_AUTH_B : MIFARE_CMD_AUTH_A;
|
|
pn532_i2c_packetbuffer[3] = blockNumber; /* Block Number (1K = 0..63, 4K = 0..255 */
|
|
memcpy (&pn532_i2c_packetbuffer[4], _key, 6);
|
|
for (i = 0; i < _uidLen; i++) {
|
|
pn532_i2c_packetbuffer[10 + i] = _uid[i]; /* 4 bytes card ID */
|
|
}
|
|
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 10 + _uidLen))
|
|
return 0;
|
|
|
|
// Read the response packet
|
|
PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer));
|
|
|
|
// Check if the response is valid and we are authenticated???
|
|
// for an auth success it should be bytes 5-7: 0xD5 0x41 0x00
|
|
// Mifare auth error is technically byte 7: 0x14 but anything other and 0x00 is not good
|
|
if (pn532_i2c_packetbuffer[0] != 0x00) {
|
|
// Authentification failed
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
uint8_t mifareclassic_ReadDataBlock (uint8_t blockNumber, uint8_t *data)
|
|
{
|
|
/* Prepare the command */
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
|
|
pn532_i2c_packetbuffer[1] = 1; /* Card number */
|
|
pn532_i2c_packetbuffer[2] = MIFARE_CMD_READ; /* Mifare Read command = 0x30 */
|
|
pn532_i2c_packetbuffer[3] = blockNumber; /* Block Number (0..63 for 1K, 0..255 for 4K) */
|
|
|
|
/* Send the command */
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 4)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Read the response packet */
|
|
PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer));
|
|
|
|
/* If byte 8 isn't 0x00 we probably have an error */
|
|
if (pn532_i2c_packetbuffer[0] != 0x00) {
|
|
return 0;
|
|
}
|
|
|
|
/* Copy the 16 data bytes to the output buffer */
|
|
/* Block content starts at byte 9 of a valid response */
|
|
memcpy (data, &pn532_i2c_packetbuffer[1], 16);
|
|
|
|
return 1;
|
|
}
|
|
|
|
uint8_t mifareclassic_WriteDataBlock (uint8_t blockNumber, uint8_t *data)
|
|
{
|
|
/* Prepare the first command */
|
|
pn532_i2c_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
|
|
pn532_i2c_packetbuffer[1] = 1; /* Card number */
|
|
pn532_i2c_packetbuffer[2] = MIFARE_CMD_WRITE; /* Mifare Write command = 0xA0 */
|
|
pn532_i2c_packetbuffer[3] = blockNumber; /* Block Number (0..63 for 1K, 0..255 for 4K) */
|
|
memcpy(&pn532_i2c_packetbuffer[4], data, 16); /* Data Payload */
|
|
|
|
/* Send the command */
|
|
if (PN532_writeCommand(pn532_i2c_packetbuffer, 20)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Read the response packet */
|
|
return (0 < PN532_readResponse(pn532_i2c_packetbuffer, sizeof(pn532_i2c_packetbuffer)));
|
|
}
|
|
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
void PN532_ScanForTag(void)
|
|
{
|
|
if (pn532_i2c_disable) { return; }
|
|
uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };
|
|
uint8_t uid_len = 0;
|
|
uint8_t card_data[16];
|
|
bool erase_success = false;
|
|
bool set_success = false;
|
|
if (PN532_readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uid_len)) {
|
|
if (pn532_i2c_scan_defer_report > 0) {
|
|
pn532_i2c_scan_defer_report--;
|
|
} else {
|
|
char uids[15];
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
char card_datas[34];
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
sprintf(uids,"");
|
|
for (uint8_t i = 0;i < uid_len;i++) {
|
|
sprintf(uids,"%s%02X",uids,uid[i]);
|
|
}
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
if (uid_len == 4) { // Lets try to read block 0 of the mifare classic card for more information
|
|
uint8_t keyuniversal[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
|
|
if (mifareclassic_AuthenticateBlock (uid, uid_len, 1, 1, keyuniversal)) {
|
|
if (mifareclassic_ReadDataBlock(1, card_data)) {
|
|
#ifdef USE_PN532_DATA_RAW
|
|
memcpy(&card_datas,&card_data,sizeof(card_data));
|
|
#else
|
|
for (uint8_t i = 0;i < sizeof(card_data);i++) {
|
|
if ((isalpha(card_data[i])) || ((isdigit(card_data[i])))) {
|
|
card_datas[i] = char(card_data[i]);
|
|
} else {
|
|
card_datas[i] = '\0';
|
|
}
|
|
}
|
|
#endif // USE_PN532_DATA_RAW
|
|
}
|
|
if (pn532_i2c_function == 1) { // erase block 1 of card
|
|
for (uint8_t i = 0;i<16;i++) {
|
|
card_data[i] = 0x00;
|
|
}
|
|
if (mifareclassic_WriteDataBlock(1, card_data)) {
|
|
erase_success = true;
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Erase success");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
memcpy(&card_datas,&card_data,sizeof(card_data)); // Cast block 1 to a string
|
|
}
|
|
}
|
|
if (pn532_i2c_function == 2) {
|
|
#ifdef USE_PN532_DATA_RAW
|
|
if (mifareclassic_WriteDataBlock(1, card_data)) {
|
|
set_success = true;
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Data write successful");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
memcpy(&card_datas,&card_data,sizeof(card_data)); // Cast block 1 to a string
|
|
}
|
|
#else
|
|
bool IsAlphaNumeric = true;
|
|
for (uint8_t i = 0;i < pn532_i2c_newdata_len;i++) {
|
|
if ((!isalpha(pn532_i2c_newdata[i])) || (!isdigit(pn532_i2c_newdata[i]))) {
|
|
IsAlphaNumeric = false;
|
|
}
|
|
}
|
|
if (IsAlphaNumeric) {
|
|
if (mifareclassic_WriteDataBlock(1, card_data)) {
|
|
memcpy(&card_data,&pn532_i2c_newdata,sizeof(card_data));
|
|
set_success = true;
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Data write successful");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
memcpy(&card_datas,&card_data,sizeof(card_data)); // Cast block 1 to a string
|
|
}
|
|
} else {
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Data must be alphanumeric");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
}
|
|
#endif // USE_PN532_DATA_RAW
|
|
}
|
|
} else {
|
|
sprintf(card_datas,"AUTHFAIL");
|
|
}
|
|
}
|
|
switch (pn532_i2c_function) {
|
|
case 0x01:
|
|
if (!erase_success) {
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Erase fail - exiting erase mode");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
}
|
|
break;
|
|
case 0x02:
|
|
if (!set_success) {
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Write failed - exiting set mode");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
pn532_i2c_function = 0;
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\""), GetDateAndTime(DT_LOCAL).c_str());
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"PN532\":{\"UID\":\"%s\", \"DATA\":\"%s\"}}"), mqtt_data, uids, card_datas);
|
|
#else
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"PN532\":{\"UID\":\"%s\"}}"), mqtt_data, uids);
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
|
|
|
|
#ifdef USE_PN532_CAUSE_EVENTS
|
|
|
|
char command[71];
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
sprintf(command,"backlog event PN532_UID=%s;event PN532_DATA=%s",uids,card_datas);
|
|
#else
|
|
sprintf(command,"event PN532_UID=%s",uids);
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
ExecuteCommand(command, SRC_RULE);
|
|
#endif // USE_PN532_CAUSE_EVENTS
|
|
|
|
pn532_i2c_scan_defer_report = 7; // Ignore tags found for two seconds
|
|
}
|
|
} else {
|
|
if (pn532_i2c_scan_defer_report > 0) { pn532_i2c_scan_defer_report--; }
|
|
}
|
|
}
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
|
|
bool PN532_Command(void)
|
|
{
|
|
bool serviced = true;
|
|
uint8_t paramcount = 0;
|
|
if (XdrvMailbox.data_len > 0) {
|
|
paramcount=1;
|
|
} else {
|
|
serviced = false;
|
|
return serviced;
|
|
}
|
|
char sub_string[XdrvMailbox.data_len];
|
|
char sub_string_tmp[XdrvMailbox.data_len];
|
|
for (uint8_t ca=0;ca<XdrvMailbox.data_len;ca++) {
|
|
if ((' ' == XdrvMailbox.data[ca]) || ('=' == XdrvMailbox.data[ca])) { XdrvMailbox.data[ca] = ','; }
|
|
if (',' == XdrvMailbox.data[ca]) { paramcount++; }
|
|
}
|
|
UpperCase(XdrvMailbox.data,XdrvMailbox.data);
|
|
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"E")) {
|
|
pn532_i2c_function = 1; // Block 0 of next card/tag will be reset to 0x00...
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Next scanned tag data block 1 will be erased");
|
|
AddLog(LOG_LEVEL_INFO);
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\""), GetDateAndTime(DT_LOCAL).c_str());
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"PN532\":{\"COMMAND\":\"E\"\"}}"), mqtt_data);
|
|
return serviced;
|
|
}
|
|
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"S")) {
|
|
if (paramcount > 1) {
|
|
if (XdrvMailbox.data[XdrvMailbox.data_len-1] == ',') {
|
|
serviced = false;
|
|
return serviced;
|
|
}
|
|
sprintf(sub_string_tmp,subStr(sub_string, XdrvMailbox.data, ",", 2));
|
|
pn532_i2c_newdata_len = strlen(sub_string_tmp);
|
|
if (pn532_i2c_newdata_len > 15) { pn532_i2c_newdata_len = 15; }
|
|
memcpy(&pn532_i2c_newdata,&sub_string_tmp,pn532_i2c_newdata_len);
|
|
pn532_i2c_newdata[pn532_i2c_newdata_len] = 0x00; // Null terminate the string
|
|
pn532_i2c_function = 2;
|
|
snprintf_P(log_data, sizeof(log_data),"I2C: PN532 NFC - Next scanned tag data block 1 will be set to '%s'",pn532_i2c_newdata);
|
|
AddLog(LOG_LEVEL_INFO);
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\""), GetDateAndTime(DT_LOCAL).c_str());
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"PN532\":{\"COMMAND\":\"S\"\"}}"), mqtt_data);
|
|
return serviced;
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xsns40(uint8_t function)
|
|
{
|
|
bool result = false;
|
|
|
|
if (i2c_flg) {
|
|
switch (function) {
|
|
case FUNC_EVERY_250_MSECOND:
|
|
if (pn532_i2c_detected) {
|
|
PN532_ScanForTag();
|
|
}
|
|
break;
|
|
case FUNC_EVERY_SECOND:
|
|
PN532_Detect();
|
|
break;
|
|
|
|
#ifdef USE_PN532_DATA_FUNCTION
|
|
case FUNC_COMMAND:
|
|
if (XSNS_40 == XdrvMailbox.index) {
|
|
result = PN532_Command();
|
|
}
|
|
break;
|
|
#endif // USE_PN532_DATA_FUNCTION
|
|
|
|
case FUNC_SAVE_BEFORE_RESTART:
|
|
if (!pn532_i2c_disable) {
|
|
pn532_i2c_disable = 1;
|
|
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "PN532 NFC Reader - Disabling for reboot", PN532_I2C_ADDRESS);
|
|
AddLog(LOG_LEVEL_DEBUG);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_PN532_I2C
|
|
#endif // USE_I2C
|