Tasmota/sonoff/xdrv_09_timers.ino

782 lines
30 KiB
C++

/*
xdrv_09_timers.ino - timer support for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_TIMERS
/*********************************************************************************************\
* Timers
*
* Arm a timer using one or all of the following JSON values:
* {"Arm":1,"Mode":0,"Time":"09:23","Window":0,"Days":"--TW--S","Repeat":1,"Output":1,"Action":1}
*
* Arm 0 = Off, 1 = On
* Mode 0 = Schedule, 1 = Sunrise, 2 = Sunset
* Time hours:minutes
* Window minutes (0..15)
* Days 7 day character mask starting with Sunday (SMTWTFS). 0 or - = Off, any other value = On
* Repeat 0 = Execute once, 1 = Execute again
* Output 1..16
* Action 0 = Off, 1 = On, 2 = Toggle, 3 = Blink or Rule if USE_RULES enabled
*
\*********************************************************************************************/
enum TimerCommands { CMND_TIMER, CMND_TIMERS
#ifdef USE_SUNRISE
, CMND_LATITUDE, CMND_LONGITUDE
#endif
};
const char kTimerCommands[] PROGMEM = D_CMND_TIMER "|" D_CMND_TIMERS
#ifdef USE_SUNRISE
"|" D_CMND_LATITUDE "|" D_CMND_LONGITUDE
#endif
;
uint16_t timer_last_minute = 60;
int8_t timer_window[MAX_TIMERS] = { 0 };
#ifdef USE_SUNRISE
/*********************************************************************************************\
* Sunrise and sunset (+13k code)
*
* https://forum.arduino.cc/index.php?topic=218280.0
* Source: C-Programm von http://lexikon.astronomie.info/zeitgleichung/neu.html
* Rewrite for Arduino by 'jurs' for German Arduino forum
\*********************************************************************************************/
const double pi2 = TWO_PI;
const double pi = PI;
const double RAD = DEG_TO_RAD;
double JulianischesDatum()
{
// Gregorianischer Kalender
int Gregor;
int Jahr = RtcTime.year;
int Monat = RtcTime.month;
int Tag = RtcTime.day_of_month;
if (Monat <= 2) {
Monat += 12;
Jahr -= 1;
}
Gregor = (Jahr / 400) - (Jahr / 100) + (Jahr / 4); // Gregorianischer Kalender
return 2400000.5 + 365.0*Jahr - 679004.0 + Gregor + (int)(30.6001 * (Monat +1)) + Tag + 0.5;
}
double InPi(double x)
{
int n = (int)(x / pi2);
x = x - n*pi2;
if (x < 0) x += pi2;
return x;
}
double eps(double T)
{
// Neigung der Erdachse
return RAD * (23.43929111 + (-46.8150*T - 0.00059*T*T + 0.001813*T*T*T)/3600.0);
}
double BerechneZeitgleichung(double *DK,double T)
{
double RA_Mittel = 18.71506921 + 2400.0513369*T +(2.5862e-5 - 1.72e-9*T)*T*T;
double M = InPi(pi2 * (0.993133 + 99.997361*T));
double L = InPi(pi2 * (0.7859453 + M/pi2 + (6893.0*sin(M)+72.0*sin(2.0*M)+6191.2*T) / 1296.0e3));
double e = eps(T);
double RA = atan(tan(L)*cos(e));
if (RA < 0.0) RA += pi;
if (L > pi) RA += pi;
RA = 24.0*RA/pi2;
*DK = asin(sin(e)*sin(L));
// Damit 0<=RA_Mittel<24
RA_Mittel = 24.0 * InPi(pi2*RA_Mittel/24.0)/pi2;
double dRA = RA_Mittel - RA;
if (dRA < -12.0) dRA += 24.0;
if (dRA > 12.0) dRA -= 24.0;
dRA = dRA * 1.0027379;
return dRA;
}
void DuskTillDawn(uint8_t *hour_up,uint8_t *minute_up, uint8_t *hour_down, uint8_t *minute_down)
{
double JD2000 = 2451545.0;
double JD = JulianischesDatum();
double T = (JD - JD2000) / 36525.0;
double DK;
/*
h (D) = -0.8333 normaler SA & SU-Gang
h (D) = -6.0 civile Dämmerung
h (D) = -12.0 nautische Dämmerung
h (D) = -18.0 astronomische Dämmerung
*/
// double h = -50/60.0*RAD;
double h = SUNRISE_DAWN_ANGLE *RAD;
double B = (((double)Settings.latitude)/1000000) * RAD; // geographische Breite
double GeographischeLaenge = ((double)Settings.longitude)/1000000;
// double Zeitzone = 0; //Weltzeit
// double Zeitzone = 1; //Winterzeit
// double Zeitzone = 2.0; //Sommerzeit
double Zeitzone = ((double)time_timezone) / 60;
double Zeitgleichung = BerechneZeitgleichung(&DK, T);
double Minuten = Zeitgleichung * 60.0;
double Zeitdifferenz = 12.0*acos((sin(h) - sin(B)*sin(DK)) / (cos(B)*cos(DK)))/pi;
double AufgangOrtszeit = 12.0 - Zeitdifferenz - Zeitgleichung;
double UntergangOrtszeit = 12.0 + Zeitdifferenz - Zeitgleichung;
double AufgangWeltzeit = AufgangOrtszeit - GeographischeLaenge / 15.0;
double UntergangWeltzeit = UntergangOrtszeit - GeographischeLaenge / 15.0;
double Aufgang = AufgangWeltzeit + Zeitzone; // In Stunden
if (Aufgang < 0.0) {
Aufgang += 24.0;
} else {
if (Aufgang >= 24.0) Aufgang -= 24.0;
}
double Untergang = UntergangWeltzeit + Zeitzone;
if (Untergang < 0.0) {
Untergang += 24.0;
} else {
if (Untergang >= 24.0) Untergang -= 24.0;
}
int AufgangMinuten = (int)(60.0*(Aufgang - (int)Aufgang)+0.5);
int AufgangStunden = (int)Aufgang;
if (AufgangMinuten >= 60.0) {
AufgangMinuten -= 60.0;
AufgangStunden++;
} else {
if (AufgangMinuten < 0.0) {
AufgangMinuten += 60.0;
AufgangStunden--;
if (AufgangStunden < 0.0) AufgangStunden += 24.0;
}
}
int UntergangMinuten = (int)(60.0*(Untergang - (int)Untergang)+0.5);
int UntergangStunden = (int)Untergang;
if (UntergangMinuten >= 60.0) {
UntergangMinuten -= 60.0;
UntergangStunden++;
} else {
if (UntergangMinuten<0) {
UntergangMinuten += 60.0;
UntergangStunden--;
if (UntergangStunden < 0.0) UntergangStunden += 24.0;
}
}
*hour_up = AufgangStunden;
*minute_up = AufgangMinuten;
*hour_down = UntergangStunden;
*minute_down = UntergangMinuten;
}
void ApplyTimerOffsets(Timer *duskdawn)
{
uint8_t hour[2];
uint8_t minute[2];
Timer stored = (Timer)*duskdawn;
// replace hours, minutes by sunrise
DuskTillDawn(&hour[0], &minute[0], &hour[1], &minute[1]);
uint8_t mode = (duskdawn->mode -1) &1;
duskdawn->time = (hour[mode] *60) + minute[mode];
// apply offsets, check for over- and underflows
uint16_t timeBuffer;
if ((uint16_t)stored.time > 719) {
// negative offset, time after 12:00
timeBuffer = (uint16_t)stored.time - 720;
// check for underflow
if (timeBuffer > (uint16_t)duskdawn->time) {
timeBuffer = 1440 - (timeBuffer - (uint16_t)duskdawn->time);
duskdawn->days = duskdawn->days >> 1;
duskdawn->days |= (stored.days << 6);
} else {
timeBuffer = (uint16_t)duskdawn->time - timeBuffer;
}
} else {
// positive offset
timeBuffer = (uint16_t)duskdawn->time + (uint16_t)stored.time;
// check for overflow
if (timeBuffer > 1440) {
timeBuffer -= 1440;
duskdawn->days = duskdawn->days << 1;
duskdawn->days |= (stored.days >> 6);
}
}
duskdawn->time = timeBuffer;
}
String GetSun(byte dawn)
{
char stime[6];
uint8_t hour[2];
uint8_t minute[2];
DuskTillDawn(&hour[0], &minute[0], &hour[1], &minute[1]);
dawn &= 1;
snprintf_P(stime, sizeof(stime), PSTR("%02d:%02d"), hour[dawn], minute[dawn]);
return String(stime);
}
uint16_t GetSunMinutes(byte dawn)
{
uint8_t hour[2];
uint8_t minute[2];
DuskTillDawn(&hour[0], &minute[0], &hour[1], &minute[1]);
dawn &= 1;
return (hour[dawn] *60) + minute[dawn];
}
#endif // USE_SUNRISE
/*******************************************************************************************/
void TimerSetRandomWindow(byte index)
{
timer_window[index] = 0;
if (Settings.timer[index].window) {
timer_window[index] = (random(0, (Settings.timer[index].window << 1) +1)) - Settings.timer[index].window; // -15 .. 15
}
}
void TimerSetRandomWindows()
{
for (byte i = 0; i < MAX_TIMERS; i++) { TimerSetRandomWindow(i); }
}
void TimerEverySecond()
{
if (RtcTime.valid) {
if (!RtcTime.hour && !RtcTime.minute && !RtcTime.second) { TimerSetRandomWindows(); } // Midnight
if (Settings.flag3.timers_enable && (uptime > 60) && (RtcTime.minute != timer_last_minute)) { // Execute from one minute after restart every minute only once
timer_last_minute = RtcTime.minute;
int16_t time = (RtcTime.hour *60) + RtcTime.minute;
uint8_t days = 1 << (RtcTime.day_of_week -1);
for (byte i = 0; i < MAX_TIMERS; i++) {
// if (Settings.timer[i].device >= devices_present) Settings.timer[i].data = 0; // Reset timer due to change in devices present
Timer xtimer = Settings.timer[i];
uint16_t set_time = xtimer.time;
#ifdef USE_SUNRISE
if ((1 == xtimer.mode) || (2 == xtimer.mode)) { // Sunrise or Sunset
ApplyTimerOffsets(&xtimer);
set_time = xtimer.time;
}
#endif
if (xtimer.arm) {
set_time += timer_window[i]; // Add random time offset
if (set_time < 0) { set_time = 0; } // Stay today;
if (set_time > 1439) { set_time = 1439; }
if (time == set_time) {
if (xtimer.days & days) {
Settings.timer[i].arm = xtimer.repeat;
#ifdef USE_RULES
if (3 == xtimer.power) { // Blink becomes Rule disregarding device and allowing use of Backlog commands
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"Clock\":{\"Timer\":%d}}"), i +1);
XdrvRulesProcess();
} else
#endif // USE_RULES
if (devices_present) { ExecuteCommandPower(xtimer.device +1, xtimer.power, SRC_TIMER); }
}
}
}
}
}
}
}
void PrepShowTimer(uint8_t index)
{
char days[8] = { 0 };
char sign[2] = { 0 };
char soutput[80];
Timer xtimer = Settings.timer[index -1];
for (byte i = 0; i < 7; i++) {
uint8_t mask = 1 << i;
snprintf(days, sizeof(days), "%s%d", days, ((xtimer.days & mask) > 0));
}
soutput[0] = '\0';
if (devices_present) {
snprintf_P(soutput, sizeof(soutput), PSTR(",\"" D_JSON_TIMER_OUTPUT "\":%d"), xtimer.device +1);
}
#ifdef USE_SUNRISE
int16_t hour = xtimer.time / 60;
if ((1 == xtimer.mode) || (2 == xtimer.mode)) { // Sunrise or Sunset
if (hour > 11) {
hour -= 12;
sign[0] = '-';
}
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"" D_CMND_TIMER "%d\":{\"" D_JSON_TIMER_ARM "\":%d,\"" D_JSON_TIMER_MODE "\":%d,\"" D_JSON_TIMER_TIME "\":\"%s%02d:%02d\",\"" D_JSON_TIMER_WINDOW "\":%d,\"" D_JSON_TIMER_DAYS "\":\"%s\",\"" D_JSON_TIMER_REPEAT "\":%d%s,\"" D_JSON_TIMER_ACTION "\":%d}"),
mqtt_data, index, xtimer.arm, xtimer.mode, sign, hour, xtimer.time % 60, xtimer.window, days, xtimer.repeat, soutput, xtimer.power);
#else
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"" D_CMND_TIMER "%d\":{\"" D_JSON_TIMER_ARM "\":%d,\"" D_JSON_TIMER_TIME "\":\"%02d:%02d\",\"" D_JSON_TIMER_WINDOW "\":%d,\"" D_JSON_TIMER_DAYS "\":\"%s\",\"" D_JSON_TIMER_REPEAT "\":%d%s,\"" D_JSON_TIMER_ACTION "\":%d}"),
mqtt_data, index, xtimer.arm, xtimer.time / 60, xtimer.time % 60, xtimer.window, days, xtimer.repeat, soutput, xtimer.power);
#endif // USE_SUNRISE
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
boolean TimerCommand()
{
char command[CMDSZ];
char dataBufUc[XdrvMailbox.data_len];
boolean serviced = true;
uint8_t index = XdrvMailbox.index;
UpperCase(dataBufUc, XdrvMailbox.data);
int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic, kTimerCommands);
if (-1 == command_code) {
serviced = false; // Unknown command
}
else if ((CMND_TIMER == command_code) && (index > 0) && (index <= MAX_TIMERS)) {
uint8_t error = 0;
if (XdrvMailbox.data_len) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= MAX_TIMERS)) {
if (XdrvMailbox.payload == 0) {
Settings.timer[index -1].data = 0; // Clear timer
} else {
Settings.timer[index -1].data = Settings.timer[XdrvMailbox.payload -1].data; // Copy timer
}
} else {
#ifndef USE_RULES
if (devices_present) {
#endif
StaticJsonBuffer<256> jsonBuffer;
JsonObject& root = jsonBuffer.parseObject(dataBufUc);
if (!root.success()) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_TIMER "%d\":\"" D_JSON_INVALID_JSON "\"}"), index); // JSON decode failed
error = 1;
}
else {
char parm_uc[10];
index--;
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_ARM))].success()) {
Settings.timer[index].arm = (root[parm_uc] != 0);
}
#ifdef USE_SUNRISE
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_MODE))].success()) {
Settings.timer[index].mode = (uint8_t)root[parm_uc] & 0x03;
}
#endif
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_TIME))].success()) {
uint16_t itime = 0;
int8_t value = 0;
uint8_t sign = 0;
char time_str[10];
snprintf(time_str, sizeof(time_str), root[parm_uc]);
const char *substr = strtok(time_str, ":");
if (substr != NULL) {
if (strchr(substr, '-')) {
sign = 1;
substr++;
}
value = atoi(substr);
if (sign) { value += 12; } // Allow entering timer offset from -11:59 to -00:01 converted to 12:01 to 23:59
if (value > 23) { value = 23; }
itime = value * 60;
substr = strtok(NULL, ":");
if (substr != NULL) {
value = atoi(substr);
if (value < 0) { value = 0; }
if (value > 59) { value = 59; }
itime += value;
}
}
Settings.timer[index].time = itime;
}
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_WINDOW))].success()) {
Settings.timer[index].window = (uint8_t)root[parm_uc] & 0x0F;
TimerSetRandomWindow(index);
}
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_DAYS))].success()) {
// SMTWTFS = 1234567 = 0011001 = 00TW00S = --TW--S
Settings.timer[index].days = 0;
const char *tday = root[parm_uc];
uint8_t i = 0;
char ch = *tday++;
while ((ch != '\0') && (i < 7)) {
if (ch == '-') { ch = '0'; }
uint8_t mask = 1 << i++;
Settings.timer[index].days |= (ch == '0') ? 0 : mask;
ch = *tday++;
}
}
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_REPEAT))].success()) {
Settings.timer[index].repeat = (root[parm_uc] != 0);
}
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_OUTPUT))].success()) {
uint8_t device = ((uint8_t)root[parm_uc] -1) & 0x0F;
Settings.timer[index].device = (device < devices_present) ? device : 0;
}
if (root[UpperCase_P(parm_uc, PSTR(D_JSON_TIMER_ACTION))].success()) {
uint8_t action = (uint8_t)root[parm_uc] & 0x03;
Settings.timer[index].power = (devices_present) ? action : 3; // If no devices than only allow rules
}
index++;
}
#ifndef USE_RULES
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_TIMER "%d\":\"" D_JSON_TIMER_NO_DEVICE "\"}"), index); // No outputs defined so nothing to control
error = 1;
}
#endif
}
}
if (!error) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{"));
PrepShowTimer(index);
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
}
}
else if (CMND_TIMERS == command_code) {
if (XdrvMailbox.data_len) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
Settings.flag3.timers_enable = XdrvMailbox.payload;
}
if (XdrvMailbox.payload == 2) {
Settings.flag3.timers_enable = !Settings.flag3.timers_enable;
}
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetStateText(Settings.flag3.timers_enable));
MqttPublishPrefixTopic_P(RESULT_OR_STAT, command);
byte jsflg = 0;
byte lines = 1;
for (byte i = 0; i < MAX_TIMERS; i++) {
if (!jsflg) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_TIMERS "%d\":{"), lines++);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data);
}
jsflg++;
PrepShowTimer(i +1);
if (jsflg > 3) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}}"), mqtt_data);
MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_CMND_TIMERS));
jsflg = 0;
}
}
mqtt_data[0] = '\0';
}
#ifdef USE_SUNRISE
else if (CMND_LONGITUDE == command_code) {
if (XdrvMailbox.data_len) {
Settings.longitude = (int)(CharToDouble(XdrvMailbox.data) *1000000);
}
char lbuff[32];
dtostrfd(((double)Settings.longitude) /1000000, 6, lbuff);
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, lbuff);
}
else if (CMND_LATITUDE == command_code) {
if (XdrvMailbox.data_len) {
Settings.latitude = (int)(CharToDouble(XdrvMailbox.data) *1000000);
}
char lbuff[32];
dtostrfd(((double)Settings.latitude) /1000000, 6, lbuff);
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, lbuff);
}
#endif
else serviced = false; // Unknown command
return serviced;
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_WEBSERVER
#ifdef USE_TIMERS_WEB
#define WEB_HANDLE_TIMER "tm"
const char S_CONFIGURE_TIMER[] PROGMEM = D_CONFIGURE_TIMER;
const char HTTP_BTN_MENU_TIMER[] PROGMEM =
"<br/><form action='" WEB_HANDLE_TIMER "' method='get'><button>" D_CONFIGURE_TIMER "</button></form>";
const char HTTP_TIMER_SCRIPT[] PROGMEM =
"var pt=[],ct=99;"
"function qs(s){" // Alias to save code space
"return document.querySelector(s);"
"}"
"function ce(i,q){" // Create select option
"var o=document.createElement('option');"
"o.textContent=i;"
"q.appendChild(o);"
"}"
#ifdef USE_SUNRISE
"function gt(){" // Set hours and minutes according to mode
"var m,p,q;"
"m=qs('input[name=\"rd\"]:checked').value;" // Get mode
"p=pt[ct]&0x7FF;" // Get time
"if(m==0){" // Time is set
"so(0);" // Hide offset span and allow Hour 00..23
"q=Math.floor(p/60);if(q<10){q='0'+q;}qs('#ho').value=q;" // Set hours
"q=p%60;if(q<10){q='0'+q;}qs('#mi').value=q;" // Set minutes
"}"
"if((m==1)||(m==2)){" // Sunrise or sunset is set
"so(1);" // Show offset span and allow Hour 00..11
"q=Math.floor(p/60);" // Parse hours
"if(q>=12){q-=12;qs('#dr').selectedIndex=1;}" // Negative offset
"else{qs('#dr').selectedIndex=0;}"
"if(q<10){q='0'+q;}qs('#ho').value=q;" // Set offset hours
"q=p%60;if(q<10){q='0'+q;}qs('#mi').value=q;" // Set offset minutes
"}"
"}"
"function so(b){" // Hide or show offset items
"o=qs('#ho');"
"e=o.childElementCount;"
"if(b==1){"
"qs('#dr').disabled='';"
"if(e>12){for(i=12;i<=23;i++){o.removeChild(o.lastElementChild);}}" // Create offset hours select options
"}else{"
"qs('#dr').disabled='disabled';"
"if(e<23){for(i=12;i<=23;i++){ce(i,o);}}" // Create hours select options
"}"
"}"
#endif
"function st(){" // Save parameters to hidden area
"var i,l,m,n,p,s;"
"m=0;s=0;"
"n=1<<31;if(eb('a0').checked){s|=n;}" // Get arm
"n=1<<15;if(eb('r0').checked){s|=n;}" // Get repeat
"for(i=0;i<7;i++){n=1<<(16+i);if(eb('w'+i).checked){s|=n;}}" // Get weekdays
#ifdef USE_SUNRISE
"m=qs('input[name=\"rd\"]:checked').value;" // Check mode
"s|=(qs('input[name=\"rd\"]:checked').value<<29);" // Get mode
#endif
"if(}1>0){"
"i=qs('#d1').selectedIndex;if(i>=0){s|=(i<<23);}" // Get output
"s|=(qs('#p1').selectedIndex<<27);" // Get action
"}else{"
"s|=3<<27;" // Get action (rule)
"}"
"l=((qs('#ho').selectedIndex*60)+qs('#mi').selectedIndex)&0x7FF;"
"if(m==0){s|=l;}" // Get time
#ifdef USE_SUNRISE
"if((m==1)||(m==2)){"
"if(qs('#dr').selectedIndex>0){l+=720;}" // If negative offset, add 12h to given offset time
"s|=l&0x7FF;" // Save offset instead of time
"}"
#endif
"s|=((qs('#mw').selectedIndex)&0x0F)<<11;" // Get window minutes
"pt[ct]=s;"
"eb('t0').value=pt.join();" // Save parameters from array to hidden area
"}"
"function ot(t,e){" // Select tab and update elements
"var i,n,o,p,q,s;"
"if(ct<99){st();}" // Save changes
"ct=t;"
"o=document.getElementsByClassName('tl');" // Restore style to all tabs/buttons
"for(i=0;i<o.length;i++){o[i].style.cssText=\"background-color:#ccc;color:#fff;font-weight:normal;\"}"
"e.style.cssText=\"background-color:#fff;color:#000;font-weight:bold;\";" // Change style to tab/button used to open content
"s=pt[ct];" // Get parameters from array
#ifdef USE_SUNRISE
"p=(s>>29)&3;eb('b'+p).checked=1;" // Set mode
"gt();" // Set hours and minutes according to mode
#else
"p=s&0x7FF;" // Get time
"q=Math.floor(p/60);if(q<10){q='0'+q;}qs('#ho').value=q;" // Set hours
"q=p%60;if(q<10){q='0'+q;}qs('#mi').value=q;" // Set minutes
#endif
"q=(s>>11)&0xF;if(q<10){q='0'+q;}qs('#mw').value=q;" // Set window minutes
"for(i=0;i<7;i++){p=(s>>(16+i))&1;eb('w'+i).checked=p;}" // Set weekdays
"if(}1>0){"
"p=(s>>23)&0xF;qs('#d1').value=p+1;" // Set output
"p=(s>>27)&3;qs('#p1').selectedIndex=p;" // Set action
"}"
"p=(s>>15)&1;eb('r0').checked=p;" // Set repeat
"p=(s>>31)&1;eb('a0').checked=p;" // Set arm
"}"
"function it(){" // Initialize elements and select first tab
"var b,i,o,s;"
"pt=eb('t0').value.split(',').map(Number);" // Get parameters from hidden area to array
"s='';for(i=0;i<" STR(MAX_TIMERS) ";i++){b='';if(0==i){b=\" id='dP'\";}s+=\"<button type='button' class='tl' onclick='ot(\"+i+\",this)'\"+b+\">\"+(i+1)+\"</button>\"}"
"eb('bt').innerHTML=s;" // Create tabs
"if(}1>0){" // Create Output and Action drop down boxes
"eb('oa').innerHTML=\"<b>" D_TIMER_OUTPUT "</b>&nbsp;<span><select style='width:60px;' id='d1' name='d1'></select></span>&emsp;<b>" D_TIMER_ACTION "</b>&nbsp;<select style='width:99px;' id='p1' name='p1'></select>\";"
"o=qs('#p1');ce('" D_OFF "',o);ce('" D_ON "',o);ce('" D_TOGGLE "',o);" // Create offset direction select options
#ifdef USE_RULES
"ce('" D_RULE "',o);"
#else
"ce('" D_BLINK "',o);"
#endif
"}else{"
"eb('oa').innerHTML=\"<b>" D_TIMER_ACTION "</b> " D_RULE "\";" // No outputs but rule is allowed
"}"
#ifdef USE_SUNRISE
"o=qs('#dr');ce('+',o);ce('-',o);" // Create offset direction select options
#endif
"o=qs('#ho');for(i=0;i<=23;i++){ce((i<10)?('0'+i):i,o);}" // Create hours select options
"o=qs('#mi');for(i=0;i<=59;i++){ce((i<10)?('0'+i):i,o);}" // Create minutes select options
"o=qs('#mw');for(i=0;i<=15;i++){ce((i<10)?('0'+i):i,o);}" // Create window minutes select options
"o=qs('#d1');for(i=0;i<}1;i++){ce(i+1,o);}" // Create outputs
"var a='" D_DAY3LIST "';"
"s='';for(i=0;i<7;i++){s+=\"<input style='width:5%;' id='w\"+i+\"' name='w\"+i+\"' type='checkbox'><b>\"+a.substring(i*3,(i*3)+3)+\"</b>\"}"
"eb('ds').innerHTML=s;" // Create weekdays
"eb('dP').click();" // Get the element with id='dP' and click on it
"}";
const char HTTP_TIMER_STYLE[] PROGMEM =
".tl{float:left;border-radius:0;border:1px solid #fff;padding:1px;width:6.25%;}"
#ifdef USE_SUNRISE
"input[type='radio']{width:13px;height:24px;margin-top:-1px;margin-right:8px;vertical-align:middle;}"
#endif
"</style>";
const char HTTP_FORM_TIMER[] PROGMEM =
"<fieldset style='min-width:470px;text-align:center;'><legend style='text-align:left;'><b>&nbsp;" D_TIMER_PARAMETERS "&nbsp;</b></legend><form method='post' action='" WEB_HANDLE_TIMER "'>"
"<br/><input style='width:5%;' id='e0' name='e0' type='checkbox'{e0><b>" D_TIMER_ENABLE "</b><br/><br/><hr/>"
"<input id='t0' name='t0' value='";
const char HTTP_FORM_TIMER1[] PROGMEM =
"' hidden><div id='bt' name='bt'></div><br/><br/><br/>"
"<div id='oa' name='oa'></div><br/>"
"<div>"
"<input style='width:5%;' id='a0' name='a0' type='checkbox'><b>" D_TIMER_ARM "</b>&emsp;"
"<input style='width:5%;' id='r0' name='r0' type='checkbox'><b>" D_TIMER_REPEAT "</b>"
"</div><br/>"
"<div>"
#ifdef USE_SUNRISE
"<fieldset style='width:299px;margin:auto;text-align:left;border:0;'>"
"<input id='b0' name='rd' type='radio' value='0' onclick='gt();'><b>" D_TIMER_TIME "</b><br/>"
"<input id='b1' name='rd' type='radio' value='1' onclick='gt();'><b>" D_SUNRISE "</b> (}8)<br/>"
"<input id='b2' name='rd' type='radio' value='2' onclick='gt();'><b>" D_SUNSET "</b> (}9)<br/>"
"</fieldset>"
"<span><select style='width:46px;' id='dr' name='dr'></select></span>"
"&nbsp;"
#else
"<b>" D_TIMER_TIME "</b>&nbsp;"
#endif // USE_SUNRISE
"<span><select style='width:60px;' id='ho' name='ho'></select></span>"
"&nbsp;" D_HOUR_MINUTE_SEPARATOR "&nbsp;"
"<span><select style='width:60px;' id='mi' name='mi'></select></span>"
"&emsp;<b>+/-</b>&nbsp;"
"<span><select style='width:60px;' id='mw' name='mw'></select></span>"
"</div><br/>"
"<div id='ds' name='ds'></div>";
const char HTTP_FORM_TIMER2[] PROGMEM =
"type='submit' onclick='st();this.form.submit();'";
void HandleTimerConfiguration()
{
if (HttpUser()) { return; }
if (!WebAuthenticate()) { return WebServer->requestAuthentication(); }
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_TIMER);
if (WebServer->hasArg("save")) {
TimerSaveSettings();
HandleConfiguration();
return;
}
String page = FPSTR(HTTP_HEAD);
page.replace(F("{v}"), FPSTR(S_CONFIGURE_TIMER));
page += FPSTR(HTTP_TIMER_SCRIPT);
page += FPSTR(HTTP_HEAD_STYLE);
page.replace(F("</style>"), FPSTR(HTTP_TIMER_STYLE));
page += FPSTR(HTTP_FORM_TIMER);
page.replace(F("{e0"), (Settings.flag3.timers_enable) ? F(" checked") : F(""));
for (byte i = 0; i < MAX_TIMERS; i++) {
if (i > 0) { page += F(","); }
page += String(Settings.timer[i].data);
}
page += FPSTR(HTTP_FORM_TIMER1);
page.replace(F("}1"), String(devices_present));
#ifdef USE_SUNRISE
page.replace(F("}8"), GetSun(0)); // Add Sunrise
page.replace(F("}9"), GetSun(1)); // Add Sunset
page.replace(F("299"), String(100 + (strlen(D_SUNSET) *12))); // Fix string length to keep radios centered
#endif // USE_SUNRISE
page += FPSTR(HTTP_FORM_END);
page.replace(F("type='submit'"), FPSTR(HTTP_FORM_TIMER2));
page += F("<script>it();</script>"); // Init elements and select first tab/button
page += FPSTR(HTTP_BTN_CONF);
ShowPage(page);
}
void TimerSaveSettings()
{
char tmp[MAX_TIMERS *12]; // Need space for MAX_TIMERS x 10 digit numbers separated by a comma
Timer timer;
Settings.flag3.timers_enable = WebServer->hasArg("e0");
WebGetArg("t0", tmp, sizeof(tmp));
char *p = tmp;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_MQTT D_CMND_TIMERS " %d"), Settings.flag3.timers_enable);
for (byte i = 0; i < MAX_TIMERS; i++) {
timer.data = strtol(p, &p, 10);
p++; // Skip comma
if (timer.time < 1440) {
bool flag = (timer.window != Settings.timer[i].window);
Settings.timer[i].data = timer.data;
if (flag) TimerSetRandomWindow(i);
}
snprintf_P(log_data, sizeof(log_data), PSTR("%s,0x%08X"), log_data, Settings.timer[i].data);
}
AddLog(LOG_LEVEL_DEBUG);
}
#endif // USE_TIMERS_WEB
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XDRV_09
boolean Xdrv09(byte function)
{
boolean result = false;
switch (function) {
case FUNC_PRE_INIT:
TimerSetRandomWindows();
break;
#ifdef USE_WEBSERVER
#ifdef USE_TIMERS_WEB
case FUNC_WEB_ADD_BUTTON:
#ifdef USE_RULES
strncat_P(mqtt_data, HTTP_BTN_MENU_TIMER, sizeof(mqtt_data));
#else
if (devices_present) { strncat_P(mqtt_data, HTTP_BTN_MENU_TIMER, sizeof(mqtt_data)); }
#endif // USE_RULES
break;
case FUNC_WEB_ADD_HANDLER:
WebServer->on("/" WEB_HANDLE_TIMER, HandleTimerConfiguration);
break;
#endif // USE_TIMERS_WEB
#endif // USE_WEBSERVER
case FUNC_EVERY_SECOND:
TimerEverySecond();
break;
case FUNC_COMMAND:
result = TimerCommand();
break;
}
return result;
}
#endif // USE_TIMERS