mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xsns_62_esp32_mi.ino

2368 lines
83 KiB
C++
Raw Blame History

/*
xsns_62_esp32_mi.ino - MI-BLE-sensors via ESP32 support for Tasmota
enabled by ESP32 && !USE_BLE_ESP32
if (ESP32 && USE_BLE_ESP32) then xsns_62_esp32_mi_ble.ino is used
Copyright (C) 2021 Christian Baars and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------------------
Version yyyymmdd Action Description
--------------------------------------------------------------------------------------------
0.9.5.5 20220326 changed - refactored connection task for asynchronous op, add response option,
fixed MI32Key command
-------
0.9.5.4 20220325 changed - add Berry adv_watch and adv_block to BLE class
-------
0.9.5.3 20220315 changed - reworked Berry part, active scanning and holding active connections possible, new format of advertisement buffer
-------
0.9.5.1 20220209 changed - rename YEERC to YLYK01, add dimmer YLKG08 (incl. YLKG07), change button report scheme
-------
0.9.5.0 20211016 changed - major rewrite, added mi32cfg (file and command), Homekit-Bridge,
extended GUI,
removed BLOCK, PERIOD, TIME, UNIT, BATTERY and PAGE -> replaced via Berry-Support
-------
0.9.1.7 20201116 changed - small bugfixes, add BLOCK and OPTION command, send BLE scan via MQTT
-------
0.9.1.0 20200712 changed - add lights and YLYK01, add pure passive mode with decryption,
lots of refactoring
-------
0.9.0.1 20200706 changed - adapt to new NimBLE-API, tweak scan process
-------
0.9.0.0 20200413 started - initial development by Christian Baars
forked - from arendst/tasmota - https://github.com/arendst/Tasmota
*/
#ifndef USE_BLE_ESP32
#ifdef ESP32 // ESP32 only. Use define USE_HM10 for ESP8266 support
#if defined CONFIG_IDF_TARGET_ESP32 || defined CONFIG_IDF_TARGET_ESP32C3 || defined CONFIG_IDF_TARGET_ESP32S3
#ifdef USE_MI_ESP32
#ifdef USE_ENERGY_SENSOR
// #define USE_MI_ESP32_ENERGY //prepare for some GUI extensions
#endif
#define XSNS_62 62
#include <NimBLEDevice.h>
#include <vector>
#include <t_bearssl.h>
#include "xsns_62_esp32_mi.h"
#ifdef USE_MI_HOMEKIT
extern "C" void mi_homekit_main(void);
extern "C" void mi_homekit_update_value(void* handle, float value, uint32_t type);
extern "C" void mi_homekit_stop();
void MI32getSetupCodeFromMAC(char* code);
#endif //USE_MI_HOMEKIT
void MI32scanEndedCB(NimBLEScanResults results);
void MI32notifyCB(NimBLERemoteCharacteristic* pRemoteCharacteristic, uint8_t* pData, size_t length, bool isNotify);
void MI32AddKey(mi_bindKey_t keyMAC);
std::vector<mi_sensor_t> MIBLEsensors;
static BLEScan* MI32Scan;
/*********************************************************************************************\
* Classes
\*********************************************************************************************/
class MI32SensorCallback : public NimBLEClientCallbacks {
void onConnect(NimBLEClient* pclient) {
// AddLog(LOG_LEVEL_DEBUG,PSTR("connected %s"), kMI32DeviceType[(MIBLEsensors[MI32.conCtx->slot].type)-1]);
MI32.infoMsg = MI32_DID_CONNECT;
MI32.mode.willConnect = 0;
MI32.mode.connected = 1;
}
void onDisconnect(NimBLEClient* pclient) {
MI32.mode.connected = 0;
MI32.infoMsg = MI32_DID_DISCONNECT;
MI32.conCtx->error = MI32_CONN_DID_DISCCONNECT;
MI32.mode.triggerBerryConnCB = 1; //mainly for unexpected or requested disconnects
//AddLog(LOG_LEVEL_DEBUG,PSTR("disconnected"));
}
bool onConnParamsUpdateRequest(NimBLEClient* MI32Client, const ble_gap_upd_params* params) {
if(params->itvl_min < 24) { /** 1.25ms units */
return false;
} else if(params->itvl_max > 40) { /** 1.25ms units */
return false;
} else if(params->latency > 2) { /** Number of intervals allowed to skip */
return false;
} else if(params->supervision_timeout > 100) { /** 10ms units */
return false;
}
return true;
}
};
class MI32AdvCallbacks: public NimBLEAdvertisedDeviceCallbacks {
void onResult(NimBLEAdvertisedDevice* advertisedDevice) {
static bool _mutex = false;
if(_mutex) return;
_mutex = true;
int RSSI = advertisedDevice->getRSSI();
uint8_t addr[6];
memcpy(addr,advertisedDevice->getAddress().getNative(),6);
MI32_ReverseMAC(addr);
size_t ServiceDataLength = 0;
if(MI32.beAdvCB != nullptr && MI32.mode.triggerBerryAdvCB == 0){
berryAdvPacket_t *_packet = (berryAdvPacket_t *)MI32.beAdvBuf;
memcpy(_packet->MAC,addr,6);
_packet->addressType = advertisedDevice->getAddressType();
_packet->RSSI = (uint8_t)RSSI;
uint8_t *_payload = advertisedDevice->getPayload();
_packet->length = advertisedDevice->getPayloadLength();
memcpy(_packet->payload,_payload, _packet->length);
MI32.mode.triggerBerryAdvCB = 1;
}
if (advertisedDevice->getServiceDataCount() == 0) {
_mutex = false;
return;
}
uint16_t UUID = advertisedDevice->getServiceDataUUID(0).getNative()->u16.value;
ServiceDataLength = advertisedDevice->getServiceData(0).length();
if(UUID==0xfe95) {
MI32ParseResponse((char*)advertisedDevice->getServiceData(0).data(),ServiceDataLength, addr, RSSI);
}
else if(UUID==0xfdcd) {
MI32parseCGD1Packet((char*)advertisedDevice->getServiceData(0).data(),ServiceDataLength, addr, RSSI);
}
else if(UUID==0x181a) { //ATC and PVVX
MI32ParseATCPacket((char*)advertisedDevice->getServiceData(0).data(),ServiceDataLength, addr, RSSI);
}
_mutex = false;
};
};
static MI32AdvCallbacks MI32ScanCallbacks;
static MI32SensorCallback MI32SensorCB;
static NimBLEClient* MI32Client;
/*********************************************************************************************\
* BLE callback functions
\*********************************************************************************************/
void MI32scanEndedCB(NimBLEScanResults results){
MI32.infoMsg = MI32_SCAN_ENDED;
MI32.mode.runningScan = 0;
}
void MI32notifyCB(NimBLERemoteCharacteristic* pRemoteCharacteristic, uint8_t* pData, size_t length, bool isNotify){
if(MI32.mode.triggerBerryConnCB) return; //discard data, if we did not pass the old to Berry yet
if(isNotify){
MI32.infoMsg = MI32_GOT_NOTIFICATION;
MI32.conCtx->buffer[0] = (uint8_t)length;
memcpy(MI32.conCtx->buffer + 1, pData, length);
MI32.conCtx->returnCharUUID = pRemoteCharacteristic->getUUID().getNative()->u16.value;
MI32.conCtx->operation = 103;
MI32.mode.triggerBerryConnCB = 1;
MI32.mode.readingDone = 1;
}
}
/*********************************************************************************************\
* Helper functions
\*********************************************************************************************/
/**
* @brief Remove all colons from null terminated char array
*
* @param _string Typically representing a MAC-address like AA:BB:CC:DD:EE:FF
*/
void MI32stripColon(char* _string){
uint32_t _length = strlen(_string);
uint32_t _index = 0;
while (_index < _length) {
char c = _string[_index];
if(c==':'){
memmove(_string+_index,_string+_index+1,_length-_index);
}
_index++;
}
_string[_index] = 0;
}
/**
* @brief Convert string that repesents a hexadecimal number to a byte array
*
* @param _string input string in format: AABBCCDDEEFF or AA:BB:CC:DD:EE:FF, caseinsensitive
* @param _mac target byte array must match the correct size (i.e. AA:BB -> uint8_t bytes[2])
*/
void MI32HexStringToBytes(char* _string, uint8_t* _byteArray) {
MI32stripColon(_string);
UpperCase(_string,_string);
uint32_t index = 0;
uint32_t _end = strlen(_string);
memset(_byteArray,0,_end/2);
while (index < _end) {
char c = _string[index];
uint8_t value = 0;
if(c >= '0' && c <= '9')
value = (c - '0');
else if (c >= 'A' && c <= 'F')
value = (10 + (c - 'A'));
_byteArray[(index/2)] += value << (((index + 1) % 2) * 4);
index++;
}
}
/**
* @brief Reverse an array of 6 bytes
*
* @param _mac a byte array of size 6 (typicalliy representing a MAC address)
*/
void MI32_ReverseMAC(uint8_t _mac[]){
uint8_t _reversedMAC[6];
for (uint8_t i=0; i<6; i++){
_reversedMAC[5-i] = _mac[i];
}
memcpy(_mac,_reversedMAC, sizeof(_reversedMAC));
}
void MI32AddKey(mi_bindKey_t keyMAC){
bool unknownMAC = true;
for(auto &_sensor : MIBLEsensors){
if(memcmp(keyMAC.MAC,_sensor.MAC,sizeof(keyMAC.MAC))==0){
_sensor.key = new uint8_t[16];
memcpy(_sensor.key,keyMAC.key,16);
unknownMAC=false;
_sensor.status.hasWrongKey = 0;
AddLog(LOG_LEVEL_INFO,PSTR("add key to %s"),kMI32DeviceType[_sensor.type-1]);
}
}
if(unknownMAC){
AddLog(LOG_LEVEL_ERROR,PSTR("M32: unknown MAC"));
}
}
/**
* @brief Decrypts payload in place
*
* @param _buf - pointer to the buffer at position of PID
* @param _bufSize - buffersize (last position is two bytes behind last byte of TAG)
* @param _payload - target buffer
* @param _slot - sensor slot in the global vector
* @return int - error code, 0 for success
*/
int MI32_decryptPacket(char * _buf, uint16_t _bufSize, uint8_t * _payload, uint32 _slot){
// int32_t start = _getCycleCount();
mi_beacon_t *_beacon = (mi_beacon_t *)_buf;
uint8_t nonce[13]; //v3:13, v5:12
uint32_t nonceLen = 12; // most devices are v5
uint8_t tag[4] = {0};
const unsigned char authData[1] = {0x11};
size_t dataLen = _bufSize - 11 ; // _bufsize - frame - type - frame.counter - MAC
if(MIBLEsensors[_slot].key == nullptr){
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: No Key found !!"));
return -2;
}
uint32_t _version = (uint32_t)_beacon->frame.version;
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: encrypted msg from %s with version:%u"),kMI32DeviceType[MIBLEsensors[_slot].type-1],_version);
if(_version == 5){
if(_beacon->frame.includesMAC){
for (uint32_t i = 0; i<6; i++){
nonce[i] = _beacon->MAC[i];
}
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: has MAC"));
memcpy(_payload,(uint8_t*)&_beacon->capability, dataLen); //special packet
dataLen -= 7;
}
else{
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: has no MAC"));
for (uint32_t i = 0; i<6; i++){
nonce[i] = MIBLEsensors[_slot].MAC[5-i];
}
dataLen = _bufSize -5 ;
memcpy(_payload,_beacon->MAC, dataLen); //special packet
dataLen -= 7;
// AddLogBuffer(LOG_LEVEL_DEBUG,(uint8_t*) _payload, dataLen);
}
// nonce: device MAC, device type, frame cnt, ext. cnt
memcpy((uint8_t*)&nonce+6,(uint8_t*)&_beacon->productID,2);
nonce[8] = _beacon->counter;
memcpy((uint8_t*)&nonce+9,(uint8_t*)&_payload[dataLen],3);
// memcpy((uint8_t*)&tag,(uint8_t*)&_payload[dataLen-4],4);
memcpy((uint8_t*)&tag,(uint8_t*)&_buf[_bufSize-4],4);
}
else if(_version == 3){
// nonce: frame_ctrl, device type, ext. cnt, frame cnt, device MAC(only first 5 bytes)
memcpy(_payload,(uint8_t*)&_beacon->capability, dataLen); //special packet
nonceLen = 13;
memcpy((uint8_t*)&nonce,(uint8_t*)&_beacon->frame,2);
memcpy((uint8_t*)&nonce+2,(uint8_t*)&_beacon->productID,2);
nonce[4] = _beacon->counter;
memcpy((uint8_t*)&nonce+5,(uint8_t*)&_buf[_bufSize-4],3);
for (uint32_t i = 0; i<5; i++){
nonce[i+8] = _beacon->MAC[i];
}
// tag[0] = _buf[_bufSize-1]; // it is unclear, if this value is a checksum
dataLen -= 4;
}
else{
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: unexpected decryption version:%u"),_version); // should never happen
}
br_aes_small_ctrcbc_keys keyCtx;
br_aes_small_ctrcbc_init(&keyCtx, MIBLEsensors[_slot].key, 16);
br_ccm_context ctx;
br_ccm_init(&ctx, &keyCtx.vtable);
br_ccm_reset(&ctx, nonce, nonceLen, sizeof(authData), dataLen, sizeof(tag));
br_ccm_aad_inject(&ctx, authData, sizeof(authData));
br_ccm_flip(&ctx);
br_ccm_run(&ctx, 0, _payload, dataLen);
if(br_ccm_check_tag(&ctx, &tag)) return 0;
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: decrypted in %.2f mSec"),enctime);
// AddLogBuffer(LOG_LEVEL_DEBUG,(uint8_t*) _payload, dataLen);
if(_version == 3 && _payload[1] == 0x10) return 0; // no known way to really verify decryption, but 0x10 is expected here for button events
return -1; // wrong key ... maybe corrupt data packet too
}
/*********************************************************************************************\
* common functions
\*********************************************************************************************/
/**
* @brief Return the slot number of a known sensor or return create new sensor slot
*
* @param _MAC BLE address of the sensor
* @param _type Type number of the sensor
* @return uint32_t Known or new slot in the sensors-vector
*/
uint32_t MIBLEgetSensorSlot(uint8_t (&_MAC)[6], uint16_t _type, uint8_t counter){
DEBUG_SENSOR_LOG(PSTR("%s: will test ID-type: %x"),D_CMND_MI32, _type);
bool _success = false;
for (uint32_t i=0;i<MI32_TYPES;i++){ // i < sizeof(kMI32DeviceID) gives compiler warning
if(_type == kMI32DeviceID[i]){
DEBUG_SENSOR_LOG(PSTR("M32: ID is type %u"), i);
_type = i+1;
_success = true;
}
else {
DEBUG_SENSOR_LOG(PSTR("%s: ID-type is not: %x"),D_CMND_MI32,kMI32DeviceID[i]);
}
}
if(!_success) return 0xff;
DEBUG_SENSOR_LOG(PSTR("%s: vector size %u"),D_CMND_MI32, MIBLEsensors.size());
for(uint32_t i=0; i<MIBLEsensors.size(); i++){
if(memcmp(_MAC,MIBLEsensors[i].MAC,sizeof(_MAC))==0){
DEBUG_SENSOR_LOG(PSTR("%s: known sensor at slot: %u"),D_CMND_MI32, i);
// AddLog(LOG_LEVEL_DEBUG,PSTR("Counters: %x %x"),MIBLEsensors[i].lastCnt, counter);
if(MIBLEsensors[i].lastCnt==counter) {
// AddLog(LOG_LEVEL_DEBUG,PSTR("Old packet"));
return 0xff; // packet received before, stop here
}
return i;
}
DEBUG_SENSOR_LOG(PSTR("%s: i: %x %x %x %x %x %x"),D_CMND_MI32, MIBLEsensors[i].MAC[5], MIBLEsensors[i].MAC[4],MIBLEsensors[i].MAC[3],MIBLEsensors[i].MAC[2],MIBLEsensors[i].MAC[1],MIBLEsensors[i].MAC[0]);
DEBUG_SENSOR_LOG(PSTR("%s: n: %x %x %x %x %x %x"),D_CMND_MI32, _MAC[5], _MAC[4], _MAC[3],_MAC[2],_MAC[1],_MAC[0]);
}
if(MI32.mode.didGetConfig){
DEBUG_SENSOR_LOG(PSTR("M32: ignore new sensor, because of loaded config"));
return 0xff; //discard the data
}
DEBUG_SENSOR_LOG(PSTR("%s: found new sensor"),D_CMND_MI32);
mi_sensor_t _newSensor;
memcpy(_newSensor.MAC,_MAC, sizeof(_MAC));
_newSensor.type = _type;
_newSensor.eventType.raw = 0;
_newSensor.feature.raw = 0;
_newSensor.status.raw = 0;
_newSensor.temp = NAN;
_newSensor.temp_history = (uint8_t*) calloc(24,1);
_newSensor.bat=0x00;
_newSensor.RSSI=0;
_newSensor.lux = 0x00ffffff;
_newSensor.lux_history = (uint8_t*) calloc(24,1);
_newSensor.key = nullptr;
switch (_type)
{
case FLORA:
_newSensor.moisture =0xff;
_newSensor.fertility =0xffff;
_newSensor.firmware[0]='\0';
_newSensor.feature.temp=1;
_newSensor.feature.moist=1;
_newSensor.feature.fert=1;
_newSensor.feature.lux=1;
_newSensor.feature.bat=1;
#ifdef USE_MI_HOMEKIT
_newSensor.light_hap_service = nullptr;
#endif
break;
case NLIGHT:
_newSensor.events=0x00;
_newSensor.feature.motion=1;
_newSensor.feature.NMT=1;
_newSensor.NMT=0;
#ifdef USE_MI_HOMEKIT
_newSensor.motion_hap_service = nullptr;
#endif //USE_MI_HOMEKIT
break;
case MJYD2S:
_newSensor.NMT=0;
_newSensor.events=0x00;
_newSensor.feature.motion=1;
_newSensor.feature.NMT=1;
_newSensor.feature.lux=1;
_newSensor.feature.bat=1;
#ifdef USE_MI_HOMEKIT
_newSensor.light_hap_service = nullptr;
_newSensor.motion_hap_service = nullptr;
#endif //USE_MI_HOMEKIT
_newSensor.feature.bat=1;
_newSensor.NMT=0;
break;
case YLYK01: case YLKG08:
_newSensor.feature.Btn = 1;
_newSensor.Btn = 99;
if(_type == YLKG08){
_newSensor.feature.knob = 1;
_newSensor.dimmer = 0;
}
#ifdef USE_MI_HOMEKIT
_newSensor.button_hap_service[0] = nullptr;
#endif //USE_MI_HOMEKIT
break;
case MCCGQ02:
_newSensor.events=0x00;
_newSensor.feature.bat=1;
_newSensor.feature.door=1;
#ifdef USE_MI_HOMEKIT
_newSensor.door_sensor_hap_service = nullptr;
#endif //USE_MI_HOMEKIT
_newSensor.door = 255;
break;
case SJWS01L:
_newSensor.feature.leak=1;
_newSensor.feature.bat=1;
_newSensor.feature.Btn=1;
_newSensor.Btn=99;
#ifdef USE_MI_HOMEKIT
_newSensor.leak_hap_service = nullptr;
_newSensor.bat_hap_service = nullptr;
_newSensor.button_hap_service[0] = nullptr;
#endif //USE_MI_HOMEKIT
break;
default:
_newSensor.hum=NAN;
_newSensor.hum_history = (uint8_t*) calloc(24,1);
_newSensor.feature.temp=1;
_newSensor.feature.hum=1;
_newSensor.feature.tempHum=1;
_newSensor.feature.bat=1;
#ifdef USE_MI_HOMEKIT
_newSensor.temp_hap_service = nullptr;
_newSensor.hum_hap_service = nullptr;
_newSensor.bat_hap_service = nullptr;
#endif //USE_MI_HOMEKIT
break;
}
MIBLEsensors.push_back(_newSensor);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: new %s at slot: %u"),kMI32DeviceType[_type-1],MIBLEsensors.size()-1);
MI32.mode.shallShowStatusInfo = 1;
return MIBLEsensors.size()-1;
};
/**
* @brief trigger real-time message for motion or RC
*
*/
void MI32triggerTele(void){
MI32.mode.triggeredTele = 1;
MqttPublishTeleperiodSensor();
}
/**
* @brief Is called after every finding of new BLE sensor
*
*/
void MI32StatusInfo() {
MI32.mode.shallShowStatusInfo = 0;
Response_P(PSTR("{\"M32\":{\"found\":%u}}"), MIBLEsensors.size());
XdrvRulesProcess(0);
}
#ifdef USE_MI_EXT_GUI
/**
* @brief Saves a sensor value mapped to the graph range of 0-20 pixel, this function automatically reads the actual hour from system time
*
* @param history - pointer to uint8_t[23]
* @param value - value as float, this
* @param type - internal type. for BLE: 0 - temperature, 1 - humidity, 2 - illuminance, for internal sensors: 100 - wattage
*/
void MI32addHistory(uint8_t *history, float value, uint32_t type){
uint32_t _hour = (LocalTime()%SECS_PER_DAY)/SECS_PER_HOUR;
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: history hour: %u"),_hour);
switch(type){
case 0: //temperature
history[_hour] = (((uint8_t)(value + 5.0f)/4)+1) + 0b10000000; //temp
break;
case 1: //humidity
history[_hour] = (((uint8_t)(value/5 ))+1) + 0b10000000; //hum
break;
case 2: //light
if(value>100.0f) value=100.0f; //clamp it for now
history[_hour] = (((uint8_t)(value/5.0f))+1) + 0b10000000; //lux
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: history lux: %u in hour:%u"),history[_hour], _hour);
break;
#ifdef USE_MI_ESP32_ENERGY
case 100: // energy
if(value == 0.0f) value = 1.0f;
uint8_t _watt = ((uint8_t)(MI32ln(value))*2) + 0b10000000; //watt
history[_hour] = _watt;
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: history energy: %u for value:%u"),history[_hour], value); //still playing with the mapping
break;
#endif //USE_MI_ESP32_ENERGY
}
}
/**
* @brief Returns a value betwenn 0-21 for use as a data point in the history graph of the extended web UI
*
* @param history - pointer to uint8_t[23]
* @param hour - hour of datapoint
* @return uint8_t - value for the y-axis, should be between 0-21
*/
uint8_t MI32fetchHistory(uint8_t *history, uint32_t hour){
if(hour>23) {
return 0;} //should never happen
if(bitRead(history[hour],7) == 0) {
return 0; //invalidated data
}
return (history[hour]) - 0b10000000;
}
/**
* @brief Invalidates the history data of the following hour by setting MSB to 0, should be called at FUNC_JSON_APPEND
*
*/
void Mi32invalidateOldHistory(){
uint32_t _hour = (LocalTime()%SECS_PER_DAY)/SECS_PER_HOUR;
static uint32_t _lastInvalidatedHour = 99;
if (_lastInvalidatedHour == _hour){
return;
}
uint32_t _nextHour = (_hour>22)?0:_hour+1;
for(auto _sensor:MIBLEsensors){
if(_sensor.feature.temp == 1){
bitClear(_sensor.temp_history[_nextHour],7);
}
if(_sensor.feature.hum == 1){
bitClear(_sensor.hum_history[_nextHour],7);
}
if(_sensor.feature.lux == 1){
bitClear(_sensor.lux_history[_nextHour],7);
}
}
_lastInvalidatedHour = _hour;
}
#endif //USE_MI_EXT_GUI
/*********************************************************************************************\
* init NimBLE
\*********************************************************************************************/
void MI32PreInit(void) {
MI32.mode.init = false;
//test section for options
MI32.option.allwaysAggregate = 1;
MI32.option.noSummary = 0;
MI32.option.minimalSummary = 0;
MI32.option.directBridgeMode = 0;
MI32.option.showRSSI = 1;
MI32.option.ignoreBogusBattery = 1; // from advertisements
MI32loadCfg();
if(MIBLEsensors.size()>0){
MI32.mode.didGetConfig = 1;
}
MI32.beAdvCB = nullptr;
AddLog(LOG_LEVEL_INFO,PSTR("M32: pre-init"));
}
void MI32Init(void) {
if (MI32.mode.init) { return; }
if (TasmotaGlobal.global_state.wifi_down && TasmotaGlobal.global_state.eth_down) { return; }
if (!TasmotaGlobal.global_state.wifi_down) {
TasmotaGlobal.wifi_stay_asleep = true;
if (WiFi.getSleep() == false) {
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: Put WiFi modem in sleep mode"));
WiFi.setSleep(true); // Sleep
}
}
if(MI32.mode.didGetConfig){
MI32.mode.didStartHAP = 0;
#ifdef USE_MI_HOMEKIT
MI32getSetupCodeFromMAC(MI32.hk_setup_code);
AddLog(LOG_LEVEL_INFO,PSTR("M32: Init HAP core"));
mi_homekit_main();
#else
MI32.mode.didStartHAP = 1;
#endif //USE_MI_HOMEKIT
}
if (!MI32.mode.init) {
NimBLEDevice::init("");
AddLog(LOG_LEVEL_INFO,PSTR("M32: Init BLE device"));
MI32.mode.init = 1;
MI32.mode.readyForNextConnJob = 1;
MI32StartTask(MI32_TASK_SCAN); // Let's get started !!
}
#ifdef USE_MI_EXT_GUI
#ifdef USE_MI_ESP32_ENERGY
MI32.energy_history = (uint8_t*) calloc(24,1);
#endif //USE_MI_ESP32_ENERGY
#endif //USE_MI_EXT_GUI
return;
}
/*********************************************************************************************\
* Berry section - partly used by HomeKit too
\*********************************************************************************************/
extern "C" {
bool MI32runBerryConnection(uint8_t operation, bool response){
if(MI32.conCtx != nullptr){
MI32.conCtx->oneOp = (operation > 9);
MI32.conCtx->operation = operation%10;
MI32.conCtx->response = response;
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: Berry connection op: %d, addrType: %d, oneOp: %u, response: %u"),MI32.conCtx->operation, MI32.conCtx->addrType, MI32.conCtx->oneOp, MI32.conCtx->response);
if(MI32.conCtx->oneOp || MI32.conCtx->operation == 5){ //...or disconnect is requested
MI32StartConnectionTask();
}
else{
if(MI32.mode.connected){
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: continue connection job"));
MI32.mode.triggerNextConnJob = 1;
if(!MI32.mode.readyForNextConnJob){
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: old connection job not finished yet!!"));
}
}
else{
MI32StartConnectionTask(); //first job of many or unexpected disconnect
}
}
return true;
}
return false;
}
void MI32setBerryConnCB(void* function, uint8_t *buffer){
if(MI32.conCtx == nullptr){
MI32.conCtx = new MI32connectionContextBerry_t;
}
MI32.conCtx->buffer = buffer;
MI32.beConnCB = function;
AddLog(LOG_LEVEL_INFO,PSTR("M32: Connection Ctx created"));
}
bool MI32setBerryCtxSvc(const char *Svc){
if(MI32.conCtx != nullptr){
MI32.conCtx->serviceUUID = NimBLEUUID(Svc);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: SVC: %s"),MI32.conCtx->serviceUUID.toString().c_str());
return true;
}
return false;
}
bool MI32setBerryCtxChr(const char *Chr){
if(MI32.conCtx != nullptr){
MI32.conCtx->charUUID = NimBLEUUID(Chr);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: CHR: %s"),MI32.conCtx->charUUID.toString().c_str());
uint16_t _uuid = MI32.conCtx->charUUID.getNative()->u16.value; //if not "notify op" -> present requested characteristic as return UUID
MI32.conCtx->returnCharUUID = _uuid;
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: return UUID: %04x"),MI32.conCtx->returnCharUUID);
return true;
}
return false;
}
bool MI32setBerryCtxMAC(uint8_t *MAC, uint8_t type){
if(MI32.conCtx != nullptr){
memcpy(MI32.conCtx->MAC,MAC,6);
if(type<4) MI32.conCtx->addrType = type;
else MI32.conCtx->addrType = 0;
return true;
}
return false;
}
void MI32setBerryAdvCB(void* function, uint8_t *buffer){
MI32.beAdvCB = function;
MI32.beAdvBuf = buffer;
}
bool MI32addMACtoBlockList(uint8_t *MAC, uint8_t type){
NimBLEDevice::addIgnored(NimBLEAddress(MAC,type));
return NimBLEDevice::isIgnored(NimBLEAddress(MAC,type));
}
bool MI32addMACtoWatchList(uint8_t *MAC, uint8_t type){
NimBLEAddress _newAddress = NimBLEAddress(MAC,type);
if(MI32Scan==nullptr){
if(!NimBLEDevice::whiteListAdd(_newAddress)){
return false;
}
}
else{
bool _runningScan = MI32Scan->stop();
if(NimBLEDevice::whiteListAdd(_newAddress)){
MI32Scan->setFilterPolicy(BLE_HCI_SCAN_FILT_USE_WL);
if(_runningScan) MI32Scan->start(0, MI32scanEndedCB, false);
}
else {
if(_runningScan) MI32Scan->start(0, MI32scanEndedCB, false);
return false;
}
}
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: add %s to watchlist of size: %u"),_newAddress.toString().c_str(),NimBLEDevice::getWhiteListCount());
return true;
}
void MI32setBatteryForSlot(uint32_t slot, uint8_t value){
if(slot>MIBLEsensors.size()-1) return;
if(MIBLEsensors[slot].feature.bat){
MIBLEsensors[slot].bat = value;
}
}
void MI32setHumidityForSlot(uint32_t slot, float value){
if(slot>MIBLEsensors.size()-1) return;
if(MIBLEsensors[slot].feature.hum){
MIBLEsensors[slot].hum = value;
}
}
void MI32setTemperatureForSlot(uint32_t slot, float value){
if(slot>MIBLEsensors.size()-1) return;
if(MIBLEsensors[slot].feature.temp){
MIBLEsensors[slot].temp = value;
}
}
uint32_t MI32numberOfDevices(){
return MIBLEsensors.size();
}
uint8_t * MI32getDeviceMAC(uint32_t slot){
if(slot>MIBLEsensors.size()-1) return NULL;
return MIBLEsensors[slot].MAC;
}
const char * MI32getDeviceName(uint32_t slot){
if(slot>MIBLEsensors.size()-1) return "";
return kMI32DeviceType[MIBLEsensors[slot].type-1];
}
} //extern "C"
/*********************************************************************************************\
* Homekit section
\*********************************************************************************************/
#ifdef USE_MI_HOMEKIT
extern "C" {
const char * MI32getSetupCode(){
return (const char*)MI32.hk_setup_code;
}
uint32_t MI32numOfRelays(){
if(TasmotaGlobal.devices_present>0) MI32.HKinfoMsg = MI32_HAP_OUTLET_ADDED;
return TasmotaGlobal.devices_present;
}
void MI32setRelayFromHK(uint32_t relay, bool onOff){
ExecuteCommandPower(relay, onOff, SRC_IGNORE);
}
uint32_t MI32getDeviceType(uint32_t slot){
return MIBLEsensors[slot].type;
}
/**
* @brief Get at least a bit of the status of the HAP core, i.e. to reduce the activy of the driver while doing the pairing
*
* @param event
*/
void MI32passHapEvent(uint32_t event){
switch(event){
case 5: //HAP_EVENT_PAIRING_STARTED
MI32suspendScanTask();
default:
vTaskResume(MI32.ScanTask);
}
if(event==4){
MI32.HKinfoMsg = MI32_HAP_CONTROLLER_DISCONNECTED;
MI32.HKconnectedControllers--;
}
if(event==3){
MI32.HKinfoMsg = MI32_HAP_CONTROLLER_CONNECTED;
MI32.HKconnectedControllers++;
}
}
void MI32didStartHAP(bool HAPdidStart){
if(HAPdidStart) {
MI32.mode.didStartHAP = 1;
MI32.HKinfoMsg = MI32_HAP_DID_START;
}
else{
MI32.HKinfoMsg = MI32_HAP_DID_NOT_START;
}
}
/**
* @brief Simply store the writeable HAP characteristics as void pointers in the "main" driver for updates of the values
*
* @param slot - sensor slot in MIBLEsensors
* @param type - sensors type, except for the buttons this is equal to the mibeacon types
* @param handle - a void ponter to a characteristic
*/
void MI32saveHAPhandles(uint32_t slot, uint32_t type, void* handle){
// AddLog(LOG_LEVEL_INFO,PSTR("M32: pass ptr to hap service, type:%u"), type);
switch(type){
case 1000: case 1001: case 1002: case 1003: case 1004: case 1005:
MIBLEsensors[slot].button_hap_service[type-1000] = handle;
break;
case 0x04:
MIBLEsensors[slot].temp_hap_service = handle;
break;
case 0x06:
MIBLEsensors[slot].hum_hap_service = handle;
break;
case 0x0a:
MIBLEsensors[slot].bat_hap_service = handle;
break;
case 0x07:
MIBLEsensors[slot].light_hap_service = handle;
break;
case 0x0f:
MIBLEsensors[slot].motion_hap_service = handle;
break;
case 0x14:
MIBLEsensors[slot].leak_hap_service = handle;
break;
case 0x19:
MIBLEsensors[slot].door_sensor_hap_service = handle;
break;
case 0xf0:
if(slot>3) break; //support only 4 for now
MI32.outlet_hap_service[slot] = handle;
break;
}
}
}
/**
* @brief Creates a simplified setup code from the Wifi MAC for HomeKit by converting every ascii-converted byte to 1, if it not 2-9
* Example: AABBCC1234f2
* -> 111-11-234
* This is no security feature, only for convenience
* * @param setupcode
*/
void MI32getSetupCodeFromMAC(char *setupcode){
uint8_t _mac[6];
char _macStr[13] = { 0 };
WiFi.macAddress(_mac);
ToHex_P(_mac,6,_macStr,13);
AddLog(LOG_LEVEL_INFO,PSTR("M32: Wifi MAC: %s"), _macStr);
for(int i = 0; i<10; i++){
if(_macStr[i]>'9' || _macStr[i]<'1') setupcode[i]='1';
else setupcode[i] = _macStr[i];
}
setupcode[3] = '-';
setupcode[6] = '-';
setupcode[10] = 0;
AddLog(LOG_LEVEL_INFO,PSTR("M32: HK setup code: %s"), setupcode);
return;
}
#endif //USE_MI_HOMEKIT
/*********************************************************************************************\
* Config section
\*********************************************************************************************/
void MI32loadCfg(){
if (TfsFileExists("/mi32cfg")){
MIBLEsensors.reserve(10);
const size_t _buf_size = 2048;
char * _filebuf = (char*)calloc(_buf_size,1);
AddLog(LOG_LEVEL_INFO,PSTR("M32: found config file"));
if(TfsLoadFile("/mi32cfg",(uint8_t*)_filebuf,_buf_size)){
AddLog(LOG_LEVEL_INFO,PSTR("M32: %s"),_filebuf);
JsonParser parser(_filebuf);
JsonParserToken root = parser.getRoot();
if (!root) {AddLog(LOG_LEVEL_INFO,PSTR("M32: invalid root "));}
JsonParserArray arr = root.getArray();
if (!arr) {AddLog(LOG_LEVEL_INFO,PSTR("M32: invalid array object"));; }
bool _error;
int32_t _numberOfDevices;
for (auto _dev : arr) {
AddLog(LOG_LEVEL_INFO,PSTR("M32: found device in config file"));
JsonParserObject _device = _dev.getObject();
uint8_t _mac[6];
JsonParserToken _val = _device[PSTR("MAC")];
_error = true;
if (_val) {
char *_macStr = (char *)_val.getStr();
AddLog(LOG_LEVEL_INFO,PSTR("M32: found MAC: %s"), _macStr);
if(strlen(_macStr)!=12){
AddLog(LOG_LEVEL_INFO,PSTR("M32: wrong MAC length: %u"), strlen(_macStr));
break;
}
MI32HexStringToBytes(_macStr,_mac);
_val = _device[PSTR("PID")];
if(_val){
uint8_t _pid[2];
char *_pidStr = (char *)_val.getStr();
AddLog(LOG_LEVEL_INFO,PSTR("M32: found PID: %s"), _pidStr);
if(strlen(_pidStr)!=4){
AddLog(LOG_LEVEL_INFO,PSTR("M32: wrong PID length: %u"), strlen(_pidStr));
break;
}
MI32HexStringToBytes(_pidStr,_pid);
uint16_t _pid16 = _pid[0]*256 + _pid[1];
_numberOfDevices = MIBLEgetSensorSlot(_mac,_pid16,0);
_error = false;
}
}
_val = _device[PSTR("key")];
if (_val) {
mi_bindKey_t _keyMAC;
uint8_t *_key = (uint8_t*) malloc(16);
char *_keyStr = (char *)_val.getStr();
if(strlen(_keyStr)==0){
continue;
}
if(strlen(_keyStr)!=32){
_error = true;
break;
}
MI32HexStringToBytes(_keyStr,_key);
MIBLEsensors[_numberOfDevices].key = _key;
}
}
if(!_error){
AddLog(LOG_LEVEL_INFO,PSTR("M32: added %u devices from config file"), _numberOfDevices + 1);
}
}
free(_filebuf);
}
}
void MI32saveConfig(){
const size_t _buf_size = 2048;
char * _filebuf = (char*) malloc(_buf_size);
_filebuf[0] = '[';
uint32_t _pos = 1;
for(auto _sensor: MIBLEsensors){
char _MAC[13];
ToHex_P(_sensor.MAC,6,_MAC,13);
char _key[33];
_key[0] = 0;
if(_sensor.key != nullptr){
ToHex_P(_sensor.key,16,_key,33);
}
uint32_t _inc = snprintf_P(_filebuf+_pos,200,PSTR("{\"MAC\":\"%s\",\"PID\":\"%04x\",\"key\":\"%s\"},"),_MAC,kMI32DeviceID[_sensor.type - 1],_key);
_pos += _inc;
}
_filebuf[_pos-1] = ']';
_filebuf[_pos] = '\0';
if (_pos>2){
AddLog(LOG_LEVEL_INFO,PSTR("M32: %s"), _filebuf);
if (TfsSaveFile("/mi32cfg",(uint8_t*)_filebuf,_pos+1)) {
AddLog(LOG_LEVEL_INFO,PSTR("M32: %u bytes written to config"), _pos+1);
}
}
else{
AddLog(LOG_LEVEL_ERROR,PSTR("M32: nothing written to config"));
}
free(_filebuf);
}
/*********************************************************************************************\
* Task section
\*********************************************************************************************/
void MI32suspendScanTask(void){
if (MI32.ScanTask != nullptr) vTaskSuspend(MI32.ScanTask);
}
void MI32StartTask(uint32_t task){
if (MI32.mode.willConnect == 1) return; // we are in the middle of connecting to something ... do not interrupt this.
switch(task){
case MI32_TASK_SCAN:
if (MI32.mode.connected == 1) return;
if(MI32.option.activeScan){
AddLog(LOG_LEVEL_INFO,PSTR("M32: Scan mode: active!")); // may have negative side effects!!
}
MI32StartScanTask();
break;
case MI32_TASK_CONN:
if (MI32.mode.canConnect == 0) return;
MI32StartConnectionTask();
break;
default:
break;
}
}
void MI32StartScanTask(){
if (MI32.mode.connected) return;
if(MI32.ScanTask!=nullptr) vTaskDelete(MI32.ScanTask);
MI32.mode.runningScan = 1;
xTaskCreatePinnedToCore(
MI32ScanTask, /* Function to implement the task */
"MI32ScanTask", /* Name of the task */
2048, /* Stack size in words */
NULL, /* Task input parameter */
0, /* Priority of the task */
&MI32.ScanTask, /* Task handle. */
0); /* Core where the task should run */
}
void MI32ScanTask(void *pvParameters){
if(MI32.mode.didGetConfig){
vTaskDelay(5000/ portTICK_PERIOD_MS);
}
if (MI32Scan == nullptr) MI32Scan = NimBLEDevice::getScan();
MI32Scan->setInterval(70);
MI32Scan->setWindow(50);
MI32Scan->setAdvertisedDeviceCallbacks(&MI32ScanCallbacks,true);
if(NimBLEDevice::getWhiteListCount()>0){
MI32Scan->setFilterPolicy(BLE_HCI_SCAN_FILT_USE_WL);
}
else {
MI32Scan->setFilterPolicy(BLE_HCI_SCAN_FILT_NO_WL);
}
MI32Scan->setActiveScan(MI32.option.activeScan);
MI32Scan->setMaxResults(0);
MI32Scan->start(0, MI32scanEndedCB, false); // never stop scanning, will pause automatically while connecting
MI32.infoMsg = MI32_START_SCANNING;
uint32_t timer = 0;
for(;;){
vTaskDelay(10000/ portTICK_PERIOD_MS);
}
vTaskDelete( NULL );
}
bool MI32ConnectActiveSensor(){ // only use inside a task !!
NimBLEAddress _address = NimBLEAddress(MI32.conCtx->MAC, MI32.conCtx->addrType);
if(MI32Client != nullptr){
if(MI32Client->isConnected() && MI32.mode.connected == 1){ //we only accept a "clean" state without obvious packet losses
if(MI32.conCtx->operation == 5){ //5 is the disconnect operation
NimBLEDevice::deleteClient(MI32Client); // disconnect the old
return false; // request disconnect
}
if(MI32Client->getPeerAddress() == _address){
MI32.infoMsg = MI32_STILL_CONNECTED;
return true; // still connected -> keep it
}
else{
// AddLog(LOG_LEVEL_ERROR,PSTR("M32: disconnect %s"),MI32Client->getPeerAddress().toString().c_str());
NimBLEDevice::deleteClient(MI32Client); // disconnect the old and connect the new
}
}
}
MI32Client = nullptr;
if(NimBLEDevice::getClientListSize()) {
MI32Client = NimBLEDevice::getClientByPeerAddress(_address);
}
if (!MI32Client){
MI32Client = NimBLEDevice::createClient(_address);
MI32Client->setClientCallbacks(&MI32SensorCB , false);
}
if (!MI32Client->connect(false)) {
MI32.mode.willConnect = 0;
NimBLEDevice::deleteClient(MI32Client);
// AddLog(LOG_LEVEL_ERROR,PSTR("M32: did not connect client"));
return false;
}
return true;
}
bool MI32StartConnectionTask(){
if(MI32.conCtx == nullptr) return false;
if(MI32.conCtx->buffer == nullptr) return false;
MI32.mode.willConnect = 1;
MI32Scan->stop();
MI32suspendScanTask();
xTaskCreatePinnedToCore(
MI32ConnectionTask, /* Function to implement the task */
"MI32ConnectionTask", /* Name of the task */
4096, /* Stack size in words */
NULL, /* Task input parameter */
2, /* Priority of the task */
&MI32.ConnTask, /* Task handle. */
0); /* Core where the task should run */
return true;
}
void MI32ConnectionTask(void *pvParameters){
NimBLEDevice::setOwnAddrType(BLE_OWN_ADDR_RANDOM,false); //seems to be important for i.e. xbox controller, hopefully not breaking other things
NimBLEDevice::setSecurityAuth(true, true, true);
MI32.conCtx->error = MI32_CONN_NO_ERROR;
if (MI32ConnectActiveSensor()){
MI32.mode.readingDone = 0;
uint32_t timer = 0;
while (MI32.mode.connected == 0){
if (timer>1000){
MI32Client->disconnect();
NimBLEDevice::deleteClient(MI32Client);
MI32.mode.willConnect = 0;
MI32.mode.triggerBerryConnCB = 1;
MI32.conCtx->error = MI32_CONN_NO_CONNECT; // not connected
MI32StartTask(MI32_TASK_SCAN);
vTaskDelay(100/ portTICK_PERIOD_MS);
vTaskDelete( NULL );
}
timer++;
vTaskDelay(10/ portTICK_PERIOD_MS);
}
MI32Client->discoverAttributes(); // solves connection problems on i.e. yeelight dimmer
NimBLERemoteService* pSvc = nullptr;
NimBLERemoteCharacteristic* pChr = nullptr;
// AddLog(LOG_LEVEL_INFO,PSTR("M32: start connection loop"));
bool keepConnectionAlive = true;
MI32.mode.triggerNextConnJob = 1;
while(keepConnectionAlive){
while(MI32.mode.triggerNextConnJob == 0){
vTaskDelay(50/ portTICK_PERIOD_MS);
if(MI32.mode.connected == 0){
MI32StartTask(MI32_TASK_SCAN);
vTaskDelete( NULL );
}
// AddLog(LOG_LEVEL_INFO,PSTR("M32: wait ..."));
}
// AddLog(LOG_LEVEL_INFO,PSTR("M32: really start connection job now ..."));
MI32.mode.triggerNextConnJob = 0;
MI32.mode.readyForNextConnJob = 0;
pSvc = MI32Client->getService(MI32.conCtx->serviceUUID);
if(pSvc) {
pChr = pSvc->getCharacteristic(MI32.conCtx->charUUID);
}
else{
MI32.conCtx->error = MI32_CONN_NO_SERVICE;
}
if (pChr){
switch(MI32.conCtx->operation){
case 1:
if(pChr->canRead()) {
NimBLEAttValue _val = pChr->readValue();
MI32.conCtx->buffer[0] = _val.size();
memcpy( MI32.conCtx->buffer + 1,_val.data(),MI32.conCtx->buffer[0]);
}
else{
MI32.conCtx->error = MI32_CONN_CAN_NOT_READ;
}
break;
case 2:
if(pChr->canWrite()) {
uint8_t len = MI32.conCtx->buffer[0];
if(pChr->writeValue(MI32.conCtx->buffer + 1,len,MI32.conCtx->response)) { // true is important !
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: write op done"));
}
else{
MI32.conCtx->error = MI32_CONN_DID_NOT_WRITE;
}
}
else{
MI32.conCtx->error = MI32_CONN_CAN_NOT_WRITE;
}
MI32.mode.readingDone = 1;
break;
case 3:
if(pChr->canNotify()) {
if(pChr->subscribe(true,MI32notifyCB, MI32.conCtx->response)){
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: subscribe"));
}
}
else{
MI32.conCtx->error = MI32_CONN_CAN_NOT_NOTIFY;
}
break;
default:
break;
}
}
else{
MI32.conCtx->error = MI32_CONN_NO_CHARACTERISTIC;
}
timer = 0;
while (timer<150){
if (MI32.mode.readingDone || !MI32.conCtx->oneOp){
break;
}
else{
if (MI32.conCtx->operation==3 && MI32.conCtx->oneOp) {
MI32.conCtx->error = MI32_CONN_NOTIFY_TIMEOUT; //did not read on notify - timeout only for one-shot op
}
}
timer++;
vTaskDelay(100/ portTICK_PERIOD_MS);
}
MI32.mode.readingDone = 0;
if(MI32.conCtx->oneOp){
MI32Client->disconnect();
MI32.mode.connected = 0;
keepConnectionAlive = false;
MI32StartTask(MI32_TASK_SCAN);
}
else{
MI32.mode.readyForNextConnJob = 1;
MI32.mode.triggerBerryConnCB = 1;
}
}
}
else{
if(MI32.conCtx->operation==5){
MI32.conCtx->error = MI32_CONN_DID_DISCCONNECT; // did succesfully disconnect
}
else{
MI32.conCtx->error = MI32_CONN_NO_CONNECT; // could not connect
}
MI32.mode.connected = 0;
MI32StartTask(MI32_TASK_SCAN);
}
MI32.mode.triggerBerryConnCB = 1;
MI32StartTask(MI32_TASK_SCAN);
vTaskDelete( NULL );
}
/*********************************************************************************************\
* parse the response from advertisements
\*********************************************************************************************/
void MI32parseMiBeacon(char * _buf, uint32_t _slot, uint16_t _bufSize){
float _tempFloat;
mi_beacon_t* _beacon = (mi_beacon_t*)_buf;
mi_payload_t _payload;
MIBLEsensors[_slot].lastCnt = _beacon->counter;
#ifdef USE_MI_EXT_GUI
bitSet(MI32.widgetSlot,_slot);
#endif //USE_MI_EXT_GUI
if(_beacon->frame.includesObj == 0){
if(_beacon->capability == 0x28) MIBLEsensors[_slot].status.isUnbounded = 1;
return; //nothing to parse
}
int decryptRet = 0;
if(_beacon->frame.isEncrypted){
MIBLEsensors[_slot].feature.needsKey = 1;
decryptRet = MI32_decryptPacket(_buf,_bufSize, (uint8_t*)&_payload,_slot);
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: decryptRet: %d"),decryptRet);
}
else{
uint32_t _offset = (_beacon->frame.includesCapability)?0:1;
uint32_t _payloadSize = (_beacon->frame.includesCapability)?_beacon->payload.size:_beacon->payload.ten;
if(_beacon->frame.includesMAC && _beacon->frame.includesObj) {
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: offset %u, size: %u"),_offset,_payloadSize);
memcpy((uint8_t*)&_payload,(uint8_t*)(&_beacon->payload)-_offset, _payloadSize + 3);
// AddLogBuffer(LOG_LEVEL_DEBUG,(uint8_t*)&_payload,_payloadSize + 3);
}
}
if(decryptRet!=0){
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: Decryption failed with error: %d"),decryptRet);
if (decryptRet == -1) MIBLEsensors[_slot].status.hasWrongKey = 1;
return;
}
// AddLog(LOG_LEVEL_DEBUG,PSTR("%s at slot %u with payload type: %02x"), kMI32DeviceType[MIBLEsensors[_slot].type-1],_slot,_payload.type);
MIBLEsensors[_slot].lastTime = millis();
switch(_payload.type){
case 0x01:
if(_payload.Btn.type == 4){ //dimmer knob rotation
MIBLEsensors[_slot].eventType.knob = 1;
if(_payload.Btn.num == 0){
MIBLEsensors[_slot].pressed = 0;
MIBLEsensors[_slot].dimmer = _payload.Btn.value;
}
else {
MIBLEsensors[_slot].pressed = 1;
MIBLEsensors[_slot].dimmer = _payload.Btn.num;
}
MI32.mode.shallTriggerTele = 1;
break; //To-Do: Map to HomeKit somehow or wait for real support of this device class in HomeKit
}
if(_payload.Btn.num == 1 && MIBLEsensors[_slot].feature.knob){ //dimmer knob long press
MIBLEsensors[_slot].longpress = _payload.Btn.value;
MI32.mode.shallTriggerTele = 1;
MIBLEsensors[_slot].eventType.longpress = 1;
#ifdef USE_MI_HOMEKIT
if((void**)MIBLEsensors[_slot].button_hap_service[0] != nullptr){
mi_homekit_update_value(MIBLEsensors[_slot].button_hap_service[0], (float)2.0f, 0x01); // only one button, long press = 2
}
#endif //USE_MI_HOMEKIT
break;
}
// single, double, long
MIBLEsensors[_slot].Btn = _payload.Btn.num;
if(MIBLEsensors[_slot].feature.knob){
MIBLEsensors[_slot].BtnType = _payload.Btn.value - 1;
}
else{
MIBLEsensors[_slot].BtnType = _payload.Btn.type;
}
MIBLEsensors[_slot].eventType.Btn = 1;
MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_HOMEKIT
if(MIBLEsensors[_slot].Btn>5) break; // hard coded limit for now
if((void**)MIBLEsensors[_slot].button_hap_service[MIBLEsensors[_slot].Btn] != nullptr){
// AddLog(LOG_LEVEL_DEBUG,PSTR("Send Button %u: SingleLong:%u, pointer: %x"), MIBLEsensors[_slot].Btn,_singleLong,MIBLEsensors[_slot].button_hap_service[MIBLEsensors[_slot].Btn] );
mi_homekit_update_value(MIBLEsensors[_slot].button_hap_service[MIBLEsensors[_slot].Btn], (float)MIBLEsensors[_slot].BtnType, 0x01);
}
#endif //USE_MI_HOMEKIT
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 1: U16: %u Button"), MIBLEsensors[_slot].Btn );
break;
case 0x04:
_tempFloat=(float)(_payload.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
MIBLEsensors[_slot].eventType.temp = 1;
DEBUG_SENSOR_LOG(PSTR("Mode 4: temp updated"));
}
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].temp_hap_service, _tempFloat, 0x04);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].temp_history, _tempFloat, 0);
#endif //USE_MI_EXT_GUI
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 4: U16: %u Temp"), _payload.temp );
break;
case 0x06:
_tempFloat=(float)(_payload.hum)/10.0f;
if(_tempFloat<101){
MIBLEsensors[_slot].hum=_tempFloat;
MIBLEsensors[_slot].eventType.hum = 1;
DEBUG_SENSOR_LOG(PSTR("Mode 6: hum updated"));
}
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].hum_hap_service, _tempFloat,0x06);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].hum_history, _tempFloat, 1);
#endif //USE_MI_EXT_GUI
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 6: U16: %u Hum"), _payload.hum);
break;
case 0x07:
MIBLEsensors[_slot].lux=_payload.lux & 0x00ffffff;
if(MIBLEsensors[_slot].type==MJYD2S){
MIBLEsensors[_slot].eventType.noMotion = 1;
}
MIBLEsensors[_slot].eventType.lux = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].light_hap_service, (float)MIBLEsensors[_slot].lux,0x07);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].lux_history, (float)MIBLEsensors[_slot].lux, 2);
#endif //USE_MI_EXT_GUI
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 7: U24: %u Lux"), _payload.lux & 0x00ffffff);
break;
case 0x08:
MIBLEsensors[_slot].moisture=_payload.moist;
MIBLEsensors[_slot].eventType.moist = 1;
DEBUG_SENSOR_LOG(PSTR("Mode 8: moisture updated"));
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 8: U8: %u Moisture"), _payload.moist);
break;
case 0x09:
MIBLEsensors[_slot].fertility=_payload.fert;
MIBLEsensors[_slot].eventType.fert = 1;
DEBUG_SENSOR_LOG(PSTR("Mode 9: fertility updated"));
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 9: U16: %u Fertility"), _payload.fert);
break;
case 0x0a:
if(MI32.option.ignoreBogusBattery){
if(MIBLEsensors[_slot].type==LYWSD03MMC || MIBLEsensors[_slot].type==MHOC401){
break;
}
}
if(_payload.bat<101){
MIBLEsensors[_slot].bat = _payload.bat;
MIBLEsensors[_slot].eventType.bat = 1;
DEBUG_SENSOR_LOG(PSTR("Mode a: bat updated"));
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].bat_hap_service, (float)_payload.bat,0xa);
#endif //USE_MI_HOMEKIT
}
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode a: U8: %u %%"), _payload.bat);
break;
case 0x0d:
_tempFloat=(float)(_payload.HT.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode d: temp updated"));
}
_tempFloat=(float)(_payload.HT.hum)/10.0f;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode d: hum updated"));
}
MIBLEsensors[_slot].eventType.tempHum = 1;
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode d: U16: %x Temp U16: %x Hum"), _payload.HT.temp, _payload.HT.hum);
break;
case 0x0f:
if (_payload.ten!=0) break;
MIBLEsensors[_slot].eventType.motion = 1;
MIBLEsensors[_slot].events++;
MIBLEsensors[_slot].lux = _payload.lux & 0x00ffffff;
MIBLEsensors[_slot].eventType.lux = 1;
MIBLEsensors[_slot].NMT = 0;
MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].motion_hap_service, (float)1,0x0f);
mi_homekit_update_value(MIBLEsensors[_slot].light_hap_service, (float)_payload.lux,0x07);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].lux_history, (float)MIBLEsensors[_slot].lux, 2);
#endif //USE_MI_EXT_GUI
// AddLog(LOG_LEVEL_DEBUG,PSTR("motion: primary"),MIBLEsensors[_slot].lux );
break;
case 0x14:
MIBLEsensors[_slot].leak = _payload.leak;
MIBLEsensors[_slot].eventType.leak = 1;
if(_payload.leak>0) MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].leak_hap_service, (float)_payload.leak,0x14);
#endif //USE_MI_HOMEKIT
break;
case 0x17:
MIBLEsensors[_slot].NMT = _payload.NMT;
MIBLEsensors[_slot].eventType.NMT = 1;
MI32.mode.shallTriggerTele = 1;
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 17: NMT: %u seconds"), _payload.NMT);
break;
case 0x19:
MIBLEsensors[_slot].door = _payload.door;
MIBLEsensors[_slot].eventType.door = 1;
MIBLEsensors[_slot].events++;
MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].door_sensor_hap_service, (float)_payload.door,0x19);
#endif //USE_MI_HOMEKIT
// AddLog(LOG_LEVEL_DEBUG,PSTR("Mode 19: %u"), _payload.door);
break;
default:
if (MIBLEsensors[_slot].type==NLIGHT){
MIBLEsensors[_slot].eventType.motion = 1; //motion
MIBLEsensors[_slot].events++;
MIBLEsensors[_slot].NMT = 0;
MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].motion_hap_service, (float)1,0x0f);
#endif //USE_MI_HOMEKIT
}
else{
//unknown payload
AddLogBuffer(LOG_LEVEL_DEBUG,(uint8_t*)_buf,_bufSize);
}
break;
}
if(MIBLEsensors[_slot].eventType.raw == 0) return;
MIBLEsensors[_slot].shallSendMQTT = 1;
if(MI32.option.directBridgeMode) MI32.mode.shallTriggerTele = 1;
}
void MI32ParseATCPacket(char * _buf, uint32_t length, uint8_t addr[6], int RSSI){
ATCPacket_t *_packet = (ATCPacket_t*)_buf;
bool isATC = (length == 0x0d);
uint32_t _slot;
if (isATC) _slot = MIBLEgetSensorSlot(_packet->MAC, 0x0a1c, _packet->A.frameCnt); // This must be a hard-coded fake ID
else {
MI32_ReverseMAC(_packet->MAC);
_slot = MIBLEgetSensorSlot(_packet->MAC, 0x944a, _packet->P.frameCnt); // ... and again
}
if(_slot==0xff) return;
// AddLog(LOG_LEVEL_DEBUG,PSTR("%s at slot %u"), kMI32DeviceType[MIBLEsensors[_slot].type-1],_slot);
MIBLEsensors[_slot].RSSI=RSSI;
MIBLEsensors[_slot].lastTime = millis();
if(isATC){
MIBLEsensors[_slot].temp = (float)(int16_t(__builtin_bswap16(_packet->A.temp)))/10.0f;
MIBLEsensors[_slot].hum = (float)_packet->A.hum;
MIBLEsensors[_slot].bat = _packet->A.batPer;
}
else{
MIBLEsensors[_slot].temp = (float)(_packet->P.temp)/100.0f;
MIBLEsensors[_slot].hum = (float)_packet->P.hum/100.0f;
MIBLEsensors[_slot].bat = _packet->P.batPer;
}
MIBLEsensors[_slot].eventType.tempHum = 1;
MIBLEsensors[_slot].eventType.bat = 1;
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].temp_hap_service, MIBLEsensors.at(_slot).temp,0x04);
mi_homekit_update_value(MIBLEsensors[_slot].hum_hap_service, MIBLEsensors.at(_slot).hum,0x06);
mi_homekit_update_value(MIBLEsensors[_slot].bat_hap_service, (float)MIBLEsensors.at(_slot).bat,0x0a);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
bitSet(MI32.widgetSlot,_slot);
MI32addHistory(MIBLEsensors[_slot].temp_history, (float)MIBLEsensors[_slot].temp, 0);
MI32addHistory(MIBLEsensors[_slot].hum_history, (float)MIBLEsensors[_slot].hum, 1);
#endif //USE_MI_EXT_GUI
MIBLEsensors[_slot].shallSendMQTT = 1;
if(MI32.option.directBridgeMode) MI32.mode.shallTriggerTele = 1;
}
void MI32parseCGD1Packet(char * _buf, uint32_t length, uint8_t addr[6], int RSSI){ // no MiBeacon
uint8_t _addr[6];
memcpy(_addr,addr,6);
uint32_t _slot = MIBLEgetSensorSlot(_addr, 0x0576, 0); // This must be hard-coded, no object-id in Cleargrass-packet, we have no packet counter too
if(_slot==0xff) return;
// AddLog(LOG_LEVEL_DEBUG,PSTR("%s at slot %u"), kMI32DeviceType[MIBLEsensors[_slot].type-1],_slot);
MIBLEsensors[_slot].RSSI=RSSI;
MIBLEsensors[_slot].lastTime = millis();
cg_packet_t _packet;
memcpy((char*)&_packet,_buf,sizeof(_packet));
switch (_packet.mode){
case 0x0401:
float _tempFloat;
_tempFloat=(float)(_packet.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp = _tempFloat;
MIBLEsensors[_slot].eventType.temp = 1;
DEBUG_SENSOR_LOG(PSTR("CGD1: temp updated"));
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].temp_hap_service, _tempFloat,0x04);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].temp_history, (float)MIBLEsensors[_slot].temp, 0);
#endif //USE_MI_EXT_GUI
}
_tempFloat=(float)(_packet.hum)/10.0f;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
MIBLEsensors[_slot].eventType.hum = 1;
DEBUG_SENSOR_LOG(PSTR("CGD1: hum updated"));
#ifdef USE_MI_HOMEKIT
mi_homekit_update_value(MIBLEsensors[_slot].hum_hap_service, _tempFloat,0x06);
#endif //USE_MI_HOMEKIT
#ifdef USE_MI_EXT_GUI
MI32addHistory(MIBLEsensors[_slot].hum_history, (float)MIBLEsensors[_slot].hum, 1);
#endif //USE_MI_EXT_GUI
}
DEBUG_SENSOR_LOG(PSTR("CGD1: U16: %x Temp U16: %x Hum"), _packet.temp, _packet.hum);
break;
case 0x0102:
if(_packet.bat<101){
MIBLEsensors[_slot].bat = _packet.bat;
MIBLEsensors[_slot].eventType.bat = 1;
DEBUG_SENSOR_LOG(PSTR("Mode a: bat updated"));
}
break;
default:
DEBUG_SENSOR_LOG(PSTR("M32: Unexpected CGD1-packet"));
}
if(MIBLEsensors[_slot].eventType.raw == 0) return;
MIBLEsensors[_slot].shallSendMQTT = 1;
if(MI32.option.directBridgeMode) MI32.mode.shallTriggerTele = 1;
#ifdef USE_MI_EXT_GUI
bitSet(MI32.widgetSlot,_slot);
#endif //USE_MI_EXT_GUI
}
void MI32ParseResponse(char *buf, uint16_t bufsize, uint8_t addr[6], int RSSI) {
if(bufsize<9) { //9 is from the NLIGHT
return;
}
uint16_t _type= buf[3]*256 + buf[2];
// AddLog(LOG_LEVEL_INFO, PSTR("%02x %02x %02x %02x"),(uint8_t)buf[0], (uint8_t)buf[1],(uint8_t)buf[2],(uint8_t)buf[3]);
uint8_t _addr[6];
memcpy(_addr,addr,6);
uint16_t _slot = MIBLEgetSensorSlot(_addr, _type, buf[4]);
if(_slot!=0xff) {
MIBLEsensors[_slot].RSSI=RSSI;
MI32parseMiBeacon(buf,_slot,bufsize);
}
}
/**
* @brief Launch functions from Core 1 to make race conditions less likely
*
*/
void MI32Every50mSecond(){
if(MI32.mode.shallTriggerTele){
MI32.mode.shallTriggerTele = 0;
MI32triggerTele();
}
if(MI32.mode.triggerBerryAdvCB == 1){
if(MI32.beAdvCB != nullptr){
// AddLogBuffer(LOG_LEVEL_DEBUG,MI32.beAdvBuf,40);
uint8_t _index = 9; // is the first byte of payload in the advertisement buffer
int _svc = 0;
int _manu = 0;
while(_index < 9 + MI32.beAdvBuf[8]){ //index of payload + _packet->length
if(MI32.beAdvBuf[_index+1] == 0x16){
_svc = _index + 2;
}
else if(MI32.beAdvBuf[_index+1] == 0xff){
_manu = _index + 2;
}
_index += MI32.beAdvBuf[_index] + 1;
}
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: svc:%u , manu:%u"),_svc,_manu);
void (*func_ptr)(int,int) = (void (*)(int,int))MI32.beAdvCB;
func_ptr(_svc,_manu);
}
MI32.mode.triggerBerryAdvCB = 0;
}
if(MI32.mode.triggerBerryConnCB == 1){
if(MI32.beConnCB != nullptr){
void (*func_ptr)(int, int, int) = (void (*)(int, int, int))MI32.beConnCB;
char _message[32];
GetTextIndexed(_message, sizeof(_message), MI32.conCtx->error, kMI32_ConnErrorMsg);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: %s"),_message);
func_ptr(MI32.conCtx->error, MI32.conCtx->operation , MI32.conCtx->returnCharUUID);
}
MI32.mode.triggerBerryConnCB = 0;
}
if(MI32.infoMsg > 0){
char _message[32];
GetTextIndexed(_message, sizeof(_message), MI32.infoMsg-1, kMI32_BLEInfoMsg);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: %s"),_message);
MI32.infoMsg = 0;
}
#ifdef USE_MI_HOMEKIT
if(MI32.HKinfoMsg > 0){
char _message[32];
GetTextIndexed(_message, sizeof(_message), MI32.HKinfoMsg-1, kMI32_HKInfoMsg);
AddLog(LOG_LEVEL_DEBUG,PSTR("M32: %s"),_message);
MI32.HKinfoMsg = 0;
}
#endif //USE_MI_HOMEKIT
}
/**
* @brief Main loop of the driver, "high level"-loop
*
*/
void MI32EverySecond(bool restart){
#ifdef USE_MI_HOMEKIT
if(TasmotaGlobal.devices_present>0){
for(uint32_t i=0;i<TasmotaGlobal.devices_present;i++){
power_t mask = 1 << i;
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: Power masl: %u"), (TasmotaGlobal.power & mask));
mi_homekit_update_value(MI32.outlet_hap_service[i],(TasmotaGlobal.power & mask)!=0,0xf0);
}
}
#endif //USE_MI_HOMEKIT
for (uint32_t i = 0; i < MIBLEsensors.size(); i++) {
if(MIBLEsensors[i].type==NLIGHT || MIBLEsensors[i].type==MJYD2S){
MIBLEsensors[i].NMT++;
#ifdef USE_MI_HOMEKIT
if(MIBLEsensors[i].NMT > 20){ //TODO: Make a choosable timeout later
mi_homekit_update_value(MIBLEsensors[i].motion_hap_service,0.0f,0x0f);
}
#endif //USE_MI_HOMEKIT
}
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
void CmndMi32Key(void) {
if (44 == XdrvMailbox.data_len || 36 == XdrvMailbox.data_len) { // a KEY-MAC-string
mi_bindKey_t keyMAC;
MI32HexStringToBytes(XdrvMailbox.data,keyMAC.buf);
if(36 == XdrvMailbox.data_len){
memmove(keyMAC.buf + 10, keyMAC.buf + 6, 12);
const uint8_t _fillbytes[4] = {0x8d,0x3d,0x3c,0x97}; // only valid for YLKG08 and YLKG07 ??
memcpy(keyMAC.buf + 6,_fillbytes,4);
AddLogBuffer(LOG_LEVEL_DEBUG,(uint8_t*) keyMAC.buf, 16);
}
MI32AddKey(keyMAC);
ResponseCmndDone();
}
}
void CmndMi32Cfg(void) {
MI32saveConfig();
ResponseCmndDone();
}
void CmndMi32Option(void){
bool onOff = atoi(XdrvMailbox.data);
switch(XdrvMailbox.index) {
case 0:
MI32.option.allwaysAggregate = onOff;
break;
case 1:
MI32.option.noSummary = onOff;
break;
case 2:
MI32.option.directBridgeMode = onOff;
break;
case 3:
MI32.mode.didGetConfig = onOff;
break;
case 4:
if(MI32.option.activeScan != onOff){
MI32.option.activeScan = onOff;
MI32StartTask(MI32_TASK_SCAN);
}
break;
}
ResponseCmndDone();
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_MI_EXT_GUI
bool MI32HandleWebGUIResponse(void){
char tmp[16];
WebGetArg(PSTR("wi"), tmp, sizeof(tmp));
if (strlen(tmp)) {
WSContentBegin(200, CT_PLAIN);
if(MI32.widgetSlot==0) {WSContentEnd();return true;}
for(uint32_t i=0;i<32;i++){
if(bitRead(MI32.widgetSlot,i)){
MI32sendWidget(i);
WSContentEnd();
bitClear(MI32.widgetSlot,i);
return true;
}
}
WSContentEnd();
return true;
}
return false;
}
#ifdef USE_MI_ESP32_ENERGY
//https://gist.github.com/LingDong-/7e4c4cae5cbbc44400a05fba65f06f23
// used for logarithmic mapping of 0 - 3600 watts to 0-20 pixel - TaylorLog did not work as expected
float MI32ln(float x) {
unsigned int bx = * (unsigned int *) (&x);
unsigned int ex = bx >> 23;
signed int t = (signed int)ex-(signed int)127;
unsigned int s = (t < 0) ? (-t) : t;
bx = 1065353216 | (bx & 8388607);
x = * (float *) (&bx);
return -1.49278+(2.11263+(-0.729104+0.10969*x)*x)*x+0.6931471806*t;
}
#endif //USE_MI_ESP32_ENERGY
void MI32createPolyline(char *polyline, uint8_t *history){
uint32_t _pos = 0;
uint32_t _inc = 0;
for (uint32_t i = 0; i<24;i++){
uint32_t y = 21-MI32fetchHistory(history,i);
if (y>20){
y = 150; //create a big gap in the graph to represent invalidated data
}
_inc = snprintf_P(polyline+_pos,10,PSTR("%u,%u "),i*6,y);
_pos+=_inc;
}
// AddLog(LOG_LEVEL_DEBUG,PSTR("M32: polyline: %s"),polyline);
}
#ifdef USE_MI_ESP32_ENERGY
void MI32sendEnergyWidget(){
if (Energy.current_available && Energy.voltage_available) {
WSContentSend_P(HTTP_MI32_POWER_WIDGET,MIBLEsensors.size()+1, Energy.voltage,Energy.current[1]);
char _polyline[176];
MI32createPolyline(_polyline,MI32.energy_history);
WSContentSend_P(PSTR("<p>" D_POWERUSAGE ": %.1f " D_UNIT_WATT ""),Energy.active_power);
WSContentSend_P(HTTP_MI32_GRAPH,_polyline,185,124,124,_polyline,1);
WSContentSend_P(PSTR("</p></div>"));
}
}
#endif //USE_MI_ESP32_ENERGY
void MI32sendWidget(uint32_t slot){
auto _sensor = MIBLEsensors[slot];
char _MAC[13];
ToHex_P(_sensor.MAC,6,_MAC,13);
uint32_t _opacity = 1;
if(_sensor.RSSI == 0){
_opacity=0;
}
char _key[33] ={0};
if(_sensor.key!=nullptr){
ToHex_P(_sensor.key,16,_key,33);
}
else if(_sensor.feature.needsKey == 1){
snprintf_P(_key,32,PSTR("!! needs key !!"));
_opacity=0;
}
if (_sensor.status.hasWrongKey == 1){
snprintf_P(_key,32,PSTR("!! wrong key !!"));
_opacity=0;
}
if (_sensor.status.isUnbounded == 1){
if(_sensor.type != CGD1){ //only exception atm
snprintf_P(_key,32,PSTR("!! not paired !!"));
_opacity=0;
}
}
char _bat[24];
snprintf_P(_bat,24,PSTR("&#128267;%u%%"), _sensor.bat);
if(!_sensor.feature.bat) _bat[0] = 0;
if (_sensor.bat == 0) _bat[9] = 0;
WSContentSend_P(HTTP_MI32_WIDGET,slot+1,_opacity,_MAC,_sensor.RSSI,_bat,_key,kMI32DeviceType[_sensor.type-1]);
if(_sensor.feature.tempHum){
if(!isnan(_sensor.temp)){
char _polyline[176];
MI32createPolyline(_polyline,_sensor.temp_history);
WSContentSend_P(PSTR("<p>" D_JSON_TEMPERATURE ": %.1f °C"),_sensor.temp);
WSContentSend_P(HTTP_MI32_GRAPH,_polyline,185,124,124,_polyline,1);
WSContentSend_P(PSTR("</p>"));
}
if(!isnan(_sensor.hum)){
char _polyline[176];
MI32createPolyline(_polyline,_sensor.hum_history);
WSContentSend_P(PSTR("<p>" D_JSON_HUMIDITY ": %.1f %%"),_sensor.hum);
WSContentSend_P(HTTP_MI32_GRAPH,_polyline,151,190,216,_polyline,2);
WSContentSend_P(PSTR("</p>"));
}
if(!isnan(_sensor.temp) && !isnan(_sensor.hum)){
WSContentSend_P(PSTR("" D_JSON_DEWPOINT ": %.1f °C"),CalcTempHumToDew(_sensor.temp,_sensor.hum));
}
}
else if(_sensor.feature.temp){
if(!isnan(_sensor.temp)){
char _polyline[176];
MI32createPolyline(_polyline,_sensor.temp_history);
WSContentSend_P(PSTR("<p>" D_JSON_TEMPERATURE ": %.1f °C"),_sensor.temp);
WSContentSend_P(HTTP_MI32_GRAPH,_polyline,185,124,124,_polyline,1);
WSContentSend_P(PSTR("</p>"));
}
}
if(_sensor.feature.lux){
if(_sensor.lux!=0x00ffffff){
char _polyline[176];
MI32createPolyline(_polyline,_sensor.lux_history);
WSContentSend_P(PSTR("<p>" D_JSON_ILLUMINANCE ": %d Lux"),_sensor.lux);
WSContentSend_P(HTTP_MI32_GRAPH,_polyline,242,240,176,_polyline,3);
WSContentSend_P(PSTR("</p>"));
}
}
if(_sensor.feature.knob){
if(_sensor.pressed == 0) {
WSContentSend_P(PSTR("<p>Dimmer Steps: %d</p>"),_sensor.dimmer);
}
else {
WSContentSend_P(PSTR("<p>Dimmer Steps pressed: %d</p>"),_sensor.dimmer);
}
WSContentSend_P(PSTR("<p>Hold: %u</p>"),_sensor.longpress);
}
if(_sensor.feature.Btn){
char _message[16];
GetTextIndexed(_message, sizeof(_message), _sensor.BtnType, kMI32_ButtonMsg);
if(_sensor.Btn<12) WSContentSend_P(PSTR("<p>Button%u: %s</p>"),_sensor.Btn,_message);
}
if(_sensor.feature.motion){
WSContentSend_P(PSTR("<p>Events: %u</p>"),_sensor.events);
WSContentSend_P(PSTR("<p>No motion for > <span class='Ti'>%u</span> seconds</p>"),_sensor.NMT);
}
if(_sensor.feature.door){
if(_sensor.door!=255){
if(_sensor.door==1){
WSContentSend_P(PSTR("<p>Contact open</p>"));
}
else{
WSContentSend_P(PSTR("<p>Contact closed</p>"));
}
WSContentSend_P(PSTR("<p>Events: %u</p>"),_sensor.events);
}
}
if(_sensor.feature.leak){
if(_sensor.leak==1){
WSContentSend_P(PSTR("<p>Leak !!!</p>"));
}
else{
WSContentSend_P(PSTR("<p>No leak</p>"));
}
}
WSContentSend_P(PSTR("</div>"));
}
void MI32InitGUI(void){
MI32suspendScanTask();
MI32.widgetSlot=0;
WSContentStart_P("m32");
WSContentSend_P(HTTP_MI32_SCRIPT_1);
// WSContentSend_P(HTTP_MI32_SCRIPT_1);
WSContentSendStyle();
WSContentSend_P(HTTP_MI32_STYLE);
WSContentSend_P(HTTP_MI32_STYLE_SVG,1,185,124,124,185,124,124);
WSContentSend_P(HTTP_MI32_STYLE_SVG,2,151,190,216,151,190,216);
WSContentSend_P(HTTP_MI32_STYLE_SVG,3,242,240,176,242,240,176);
#ifdef USE_MI_HOMEKIT
WSContentSend_P((HTTP_MI32_PARENT_START),MIBLEsensors.size(),UpTime(),MI32.hk_setup_code,MI32.HKconnectedControllers,ESP.getFreeHeap()/1024);
#else
const char _setupCode[1] = {0};
WSContentSend_P((HTTP_MI32_PARENT_START),MIBLEsensors.size(),UpTime(),_setupCode,ESP.getFreeHeap()/1024);
#endif //USE_MI_HOMEKIT
for(uint32_t _slot = 0;_slot<MIBLEsensors.size();_slot++){
MI32sendWidget(_slot);
}
#ifdef USE_MI_ESP32_ENERGY
MI32sendEnergyWidget();
#endif //USE_MI_ESP32_ENERGY
WSContentSend_P(PSTR("</div>"));
WSContentSpaceButton(BUTTON_MAIN);
WSContentStop();
vTaskResume(MI32.ScanTask);
}
void MI32HandleWebGUI(void){
if (!HttpCheckPriviledgedAccess()) { return; }
if (MI32HandleWebGUIResponse()) { return; }
MI32InitGUI();
}
#endif //USE_MI_EXT_GUI
const char HTTP_MI32[] PROGMEM = "{s}Mi ESP32 {m} %u devices{e}";
#ifndef USE_MI_EXT_GUI
const char HTTP_BATTERY[] PROGMEM = "{s}%s" " Battery" "{m}%u %%{e}";
const char HTTP_LASTBUTTON[] PROGMEM = "{s}%s Last Button{m}%u {e}";
const char HTTP_EVENTS[] PROGMEM = "{s}%s Events{m}%u {e}";
const char HTTP_NMT[] PROGMEM = "{s}%s No motion{m}> %u seconds{e}";
const char HTTP_DOOR[] PROGMEM = "{s}%s Door{m}> %u open/closed{e}";
const char HTTP_MI32_FLORA_DATA[] PROGMEM = "{s}%s" " Fertility" "{m}%u us/cm{e}";
#endif //USE_MI_EXT_GUI
const char HTTP_MI32_MAC[] PROGMEM = "{s}%s %s{m}%s{e}";
const char HTTP_MI32_HL[] PROGMEM = "{s}<hr>{m}<hr>{e}";
const char HTTP_RSSI[] PROGMEM = "{s}%s " D_RSSI "{m}%d dBm{e}";
void MI32ShowContinuation(bool *commaflg) {
if (*commaflg) {
ResponseAppend_P(PSTR(","));
} else {
*commaflg = true;
}
}
void MI32Show(bool json)
{
if (json) {
#ifdef USE_HOME_ASSISTANT
bool _noSummarySave = MI32.option.noSummary;
bool _minimalSummarySave = MI32.option.minimalSummary;
if(hass_mode==2){
MI32.option.noSummary = false;
MI32.option.minimalSummary = false;
}
#endif //USE_HOME_ASSISTANT
if(!MI32.mode.triggeredTele){
if(MI32.option.noSummary) return; // no message at TELEPERIOD
}
MI32suspendScanTask();
for (uint32_t i = 0; i < MIBLEsensors.size(); i++) {
if(MI32.mode.triggeredTele && MIBLEsensors[i].eventType.raw == 0) continue;
if(MI32.mode.triggeredTele && MIBLEsensors[i].shallSendMQTT==0) continue;
bool commaflg = false;
ResponseAppend_P(PSTR(",\"%s-%02x%02x%02x\":{"),
kMI32DeviceType[MIBLEsensors[i].type-1],
MIBLEsensors[i].MAC[3], MIBLEsensors[i].MAC[4], MIBLEsensors[i].MAC[5]);
if((!MI32.mode.triggeredTele && !MI32.option.minimalSummary)||MI32.mode.triggeredTele){
bool tempHumSended = false;
if(MIBLEsensors[i].feature.tempHum){
if(MIBLEsensors[i].eventType.tempHum || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate){
if (!isnan(MIBLEsensors[i].hum) && !isnan(MIBLEsensors[i].temp)
#ifdef USE_HOME_ASSISTANT
||(hass_mode!=-1)
#endif //USE_HOME_ASSISTANT
) {
MI32ShowContinuation(&commaflg);
ResponseAppendTHD(MIBLEsensors[i].temp, MIBLEsensors[i].hum);
tempHumSended = true;
}
}
}
if(MIBLEsensors[i].feature.temp && !tempHumSended){
if(MIBLEsensors[i].eventType.temp || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate) {
if (!isnan(MIBLEsensors[i].temp)
#ifdef USE_HOME_ASSISTANT
||(hass_mode!=-1)
#endif //USE_HOME_ASSISTANT
) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_TEMPERATURE "\":%*_f"),
Settings->flag2.temperature_resolution, &MIBLEsensors[i].temp);
}
}
}
if(MIBLEsensors[i].feature.hum && !tempHumSended){
if(MIBLEsensors[i].eventType.hum || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate) {
if (!isnan(MIBLEsensors[i].hum)
#ifdef USE_HOME_ASSISTANT
||(hass_mode!=-1)
#endif //USE_HOME_ASSISTANT
) {
char hum[FLOATSZ];
dtostrfd(MIBLEsensors[i].hum, Settings->flag2.humidity_resolution, hum);
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_HUMIDITY "\":%s"), hum);
}
}
}
if (MIBLEsensors[i].feature.lux){
if(MIBLEsensors[i].eventType.lux || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate){
#ifdef USE_HOME_ASSISTANT
if ((hass_mode != -1) && (MIBLEsensors[i].lux == 0x0ffffff)) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_ILLUMINANCE "\":null"));
} else
#endif //USE_HOME_ASSISTANT
if ((MIBLEsensors[i].lux != 0x0ffffff)
#ifdef USE_HOME_ASSISTANT
|| (hass_mode != -1)
#endif //USE_HOME_ASSISTANT
) { // this is the error code -> no lux
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_ILLUMINANCE "\":%u"), MIBLEsensors[i].lux);
}
}
}
if (MIBLEsensors[i].feature.moist){
if(MIBLEsensors[i].eventType.moist || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate){
#ifdef USE_HOME_ASSISTANT
if ((hass_mode != -1) && (MIBLEsensors[i].moisture == 0xff)) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_MOISTURE "\":null"));
} else
#endif //USE_HOME_ASSISTANT
if ((MIBLEsensors[i].moisture != 0xff)
#ifdef USE_HOME_ASSISTANT
|| (hass_mode != -1)
#endif //USE_HOME_ASSISTANT
) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"" D_JSON_MOISTURE "\":%u"), MIBLEsensors[i].moisture);
}
}
}
if (MIBLEsensors[i].feature.fert){
if(MIBLEsensors[i].eventType.fert || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate){
#ifdef USE_HOME_ASSISTANT
if ((hass_mode != -1) && (MIBLEsensors[i].fertility == 0xffff)) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Fertility\":null"));
} else
#endif //USE_HOME_ASSISTANT
if ((MIBLEsensors[i].fertility != 0xffff)
#ifdef USE_HOME_ASSISTANT
|| (hass_mode != -1)
#endif //USE_HOME_ASSISTANT
) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Fertility\":%u"), MIBLEsensors[i].fertility);
}
}
}
if (MIBLEsensors[i].feature.Btn){
if(MIBLEsensors[i].eventType.Btn
#ifdef USE_HOME_ASSISTANT
||(hass_mode==2)
#endif //USE_HOME_ASSISTANT
){
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Button%u\":%u"),MIBLEsensors[i].Btn,MIBLEsensors[i].BtnType + 1); //internal type is Xiaomi/Homekit 0,1,2 -> Tasmota 1,2,3
}
}
if (MIBLEsensors[i].feature.knob){
if(MIBLEsensors[i].eventType.knob
#ifdef USE_HOME_ASSISTANT
||(hass_mode==2)
#endif //USE_HOME_ASSISTANT
){
MI32ShowContinuation(&commaflg);
char _pressed[3] = {'_','P',0};
if (MIBLEsensors[i].pressed == 0){
_pressed[0] = 0;
}
ResponseAppend_P(PSTR("\"Dimmer%s\":%d"),_pressed, MIBLEsensors[i].dimmer);
}
if(MIBLEsensors[i].eventType.longpress
#ifdef USE_HOME_ASSISTANT
||(hass_mode==2)
#endif //USE_HOME_ASSISTANT
){
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Hold\":%d"), MIBLEsensors[i].longpress);
}
}
} // minimal summary
if (MIBLEsensors[i].feature.motion){
if(MIBLEsensors[i].eventType.motion || !MI32.mode.triggeredTele){
if(MI32.mode.triggeredTele) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Motion\":1")); // only real-time
}
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Events\":%u"),MIBLEsensors[i].events);
}
else if(MIBLEsensors[i].eventType.noMotion && MI32.mode.triggeredTele){
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Motion\":0"));
}
}
if (MIBLEsensors[i].feature.door){
if(MIBLEsensors[i].eventType.door || !MI32.mode.triggeredTele){
if(MI32.mode.triggeredTele) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Door\":%u"),MIBLEsensors[i].door);
}
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Events\":%u"),MIBLEsensors[i].events);
}
}
if (MIBLEsensors[i].type == FLORA && !MI32.mode.triggeredTele) {
if (MIBLEsensors[i].firmware[0] != '\0') { // this is the error code -> no firmware
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Firmware\":\"%s\""), MIBLEsensors[i].firmware);
}
}
if (MIBLEsensors[i].feature.NMT || !MI32.mode.triggeredTele){
if(MIBLEsensors[i].eventType.NMT){
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"NMT\":%u"), MIBLEsensors[i].NMT);
}
}
if (MIBLEsensors[i].feature.bat){
if(MIBLEsensors[i].eventType.bat || !MI32.mode.triggeredTele || MI32.option.allwaysAggregate){
#ifdef USE_HOME_ASSISTANT
if ((hass_mode != -1) && (MIBLEsensors[i].bat == 0x00)) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Battery\":null"));
} else
#endif //USE_HOME_ASSISTANT
if ((MIBLEsensors[i].bat != 0x00)
#ifdef USE_HOME_ASSISTANT
|| (hass_mode != -1)
#endif //USE_HOME_ASSISTANT
) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"Battery\":%u"), MIBLEsensors[i].bat);
}
}
}
if (MI32.option.showRSSI) {
MI32ShowContinuation(&commaflg);
ResponseAppend_P(PSTR("\"RSSI\":%d"), MIBLEsensors[i].RSSI);
}
ResponseJsonEnd();
MIBLEsensors[i].eventType.raw = 0;
if(MIBLEsensors[i].shallSendMQTT==1){
MIBLEsensors[i].shallSendMQTT = 0;
continue;
}
}
MI32.mode.triggeredTele = 0;
#ifdef USE_HOME_ASSISTANT
if(hass_mode==2){
MI32.option.noSummary = _noSummarySave;
MI32.option.minimalSummary = _minimalSummarySave;
}
#endif //USE_HOME_ASSISTANT
#ifdef USE_MI_EXT_GUI
Mi32invalidateOldHistory();
#ifdef USE_MI_ESP32_ENERGY
MI32addHistory(MI32.energy_history,Energy.active_power[0],100); //TODO: which value??
#endif //USE_MI_ESP32_ENERGY
#endif //USE_MI_EXT_GUI
vTaskResume(MI32.ScanTask);
#ifdef USE_WEBSERVER
} else {
MI32suspendScanTask();
WSContentSend_P(HTTP_MI32, MIBLEsensors.size());
#ifdef USE_MI_HOMEKIT
if(MI32.mode.didStartHAP){
WSContentSend_PD(PSTR("{s}HomeKit Code{m} %s{e}"),MI32.hk_setup_code);
}
#endif //USE_MI_HOMEKIT
#ifndef USE_MI_EXT_GUI
for (uint32_t i = 0; i<MIBLEsensors.size(); i++) {
WSContentSend_PD(HTTP_MI32_HL);
char _MAC[18];
ToHex_P(MIBLEsensors[i].MAC,6,_MAC,18,':');
WSContentSend_PD(HTTP_MI32_MAC, kMI32DeviceType[MIBLEsensors[i].type-1], D_MAC_ADDRESS, _MAC);
WSContentSend_PD(HTTP_RSSI, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].RSSI);
if (MIBLEsensors[i].type==FLORA) {
if (!isnan(MIBLEsensors[i].temp)) {
WSContentSend_Temp(kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].temp);
}
if (MIBLEsensors[i].moisture!=0xff) {
WSContentSend_PD(HTTP_SNS_MOISTURE, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].moisture);
}
if (MIBLEsensors[i].fertility!=0xffff) {
WSContentSend_PD(HTTP_MI32_FLORA_DATA, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].fertility);
}
}
if (MIBLEsensors[i].type>FLORA) { // everything "above" Flora
if (!isnan(MIBLEsensors[i].hum) && !isnan(MIBLEsensors[i].temp)) {
WSContentSend_THD(kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].temp, MIBLEsensors[i].hum);
}
}
if (MIBLEsensors[i].feature.needsKey) {
if(MIBLEsensors[i].key == nullptr){
WSContentSend_PD(PSTR("{s}No known Key!!{m} can not decrypt messages{e}"));
}
else if(MIBLEsensors[i].status.hasWrongKey){
WSContentSend_PD(PSTR("{s}Wrong Key!!{m} can not decrypt messages{e}"));
}
}
if (MIBLEsensors[i].type==NLIGHT || MIBLEsensors[i].type==MJYD2S) {
WSContentSend_PD(HTTP_EVENTS, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].events);
if(MIBLEsensors[i].NMT>0) WSContentSend_PD(HTTP_NMT, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].NMT);
}
if(MIBLEsensors[i].door != 255 && MIBLEsensors[i].type==MCCGQ02){
WSContentSend_PD(HTTP_DOOR, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].door);
}
if (MIBLEsensors[i].lux!=0x00ffffff) { // this is the error code -> no valid value
WSContentSend_PD(HTTP_SNS_ILLUMINANCE, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].lux);
}
if(MIBLEsensors[i].bat!=0x00){
WSContentSend_PD(HTTP_BATTERY, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].bat);
}
if (MIBLEsensors[i].type==YLYK01){
WSContentSend_PD(HTTP_LASTBUTTON, kMI32DeviceType[MIBLEsensors[i].type-1], MIBLEsensors[i].Btn);
}
}
#endif //USE_MI_EXT_GUI
#endif // USE_WEBSERVER
}
vTaskResume(MI32.ScanTask);
}
int ExtStopBLE(){
if(Settings->flag5.mi32_enable == 0) return 0;
if (MI32.ScanTask != nullptr){
MI32Scan->stop();
vTaskDelete(MI32.ScanTask);
AddLog(LOG_LEVEL_INFO,PSTR("M32: stop BLE"));
}
#ifdef USE_MI_HOMEKIT
if(MI32.mode.didStartHAP) {
AddLog(LOG_LEVEL_INFO,PSTR("M32: stop Homebridge"));
mi_homekit_stop();
}
#endif //USE_MI_HOMEKIT
return 0;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xsns62(uint8_t function)
{
if (!Settings->flag5.mi32_enable) { return false; } // SetOption115 - Enable ESP32 MI32 BLE
bool result = false;
if (FUNC_INIT == function){
MI32PreInit();
}
if (!MI32.mode.init) {
if (function == FUNC_EVERY_250_MSECOND) {
MI32Init();
}
return result;
}
switch (function) {
case FUNC_EVERY_50_MSECOND:
MI32Every50mSecond();
break;
case FUNC_EVERY_SECOND:
MI32EverySecond(false);
break;
case FUNC_SAVE_BEFORE_RESTART:
ExtStopBLE();
break;
case FUNC_COMMAND:
result = DecodeCommand(kMI32_Commands, MI32_Commands);
break;
case FUNC_JSON_APPEND:
MI32Show(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
MI32Show(0);
break;
#ifdef USE_MI_EXT_GUI
case FUNC_WEB_ADD_MAIN_BUTTON:
if (MI32.mode.didGetConfig) WSContentSend_P(HTTP_BTN_MENU_MI32);
break;
case FUNC_WEB_ADD_HANDLER:
WebServer_on(PSTR("/m32"), MI32HandleWebGUI);
break;
#endif //USE_MI_EXT_GUI
#endif // USE_WEBSERVER
}
return result;
}
#endif // USE_MI_ESP32
#endif // CONFIG_IDF_TARGET_ESP32 or CONFIG_IDF_TARGET_ESP32C3
#endif // ESP32
#endif // USE_BLE_ESP32
Reference in New Issue View Git Blame Copy Permalink