Tasmota/lib/lib_display/ILI9341-gemu-1.0/ILI9341_2.cpp

677 lines
16 KiB
C++

/*!
* @file ILI9341_2.cpp
*
* @mainpage Adafruit ILI9341 TFT Displays
*
* @section intro_sec Introduction
*
* This is the documentation for Adafruit's ILI9341 driver for the
* Arduino platform.
*
* This library works with the Adafruit 2.8" Touch Shield V2 (SPI)
* http://www.adafruit.com/products/1651
*
* Adafruit 2.4" TFT LCD with Touchscreen Breakout w/MicroSD Socket - ILI9341
* https://www.adafruit.com/product/2478
*
* 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341
* https://www.adafruit.com/product/1770
*
* 2.2" 18-bit color TFT LCD display with microSD card breakout - ILI9340
* https://www.adafruit.com/product/1770
*
* TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers
* https://www.adafruit.com/product/3315
*
* These displays use SPI to communicate, 4 or 5 pins are required
* to interface (RST is optional).
*
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
* @section dependencies Dependencies
*
* This library depends on <a href="https://github.com/adafruit/Adafruit_GFX">
* Adafruit_GFX</a> being present on your system. Please make sure you have
* installed the latest version before using this library.
*
* @section author Author
*
* Written by Limor "ladyada" Fried for Adafruit Industries.
*
* @section license License
*
* BSD license, all text here must be included in any redistribution.
*
*/
//#ifdef ESP32
#include "ILI9341_2.h"
#include <limits.h>
// ESP32 uses 2. SPI BUS, ESP8266 uses software spi
#ifdef ESP32
#undef ILI9341_2_DIMMER
#define ILI9341_2_DIMMER
#undef ESP32_PWM_CHANNEL
#define ESP32_PWM_CHANNEL 1
#endif
#define ILI9341_2_HWSPI
#if defined (ILI9341_2_HWSPI)
#define SPI_BEGIN_TRANSACTION() if (_hwspi) spi2->beginTransaction(sspi2)
#define SPI_END_TRANSACTION() if (_hwspi) spi2->endTransaction()
#else
#define SPI_BEGIN_TRANSACTION()
#define SPI_END_TRANSACTION()
#endif
const uint16_t ili9341_2_colors[]={ILI9341_BLACK,ILI9341_WHITE,ILI9341_RED,ILI9341_GREEN,ILI9341_BLUE,ILI9341_CYAN,ILI9341_MAGENTA,\
ILI9341_YELLOW,ILI9341_NAVY,ILI9341_DARKGREEN,ILI9341_DARKCYAN,ILI9341_MAROON,ILI9341_PURPLE,ILI9341_OLIVE,\
ILI9341_LIGHTGREY,ILI9341_DARKGREY,ILI9341_ORANGE,ILI9341_GREENYELLOW,ILI9341_PINK};
uint16_t ILI9341_2::GetColorFromIndex(uint8_t index) {
if (index >= sizeof(ili9341_2_colors) / 2) index = 0;
return ili9341_2_colors[index];
}
static const uint8_t PROGMEM ili9341_2_initcmd[] = {
0xEF, 3, 0x03, 0x80, 0x02,
0xCF, 3, 0x00, 0xC1, 0x30,
0xED, 4, 0x64, 0x03, 0x12, 0x81,
0xE8, 3, 0x85, 0x00, 0x78,
0xCB, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
0xF7, 1, 0x20,
0xEA, 2, 0x00, 0x00,
ILI9341_2_PWCTR1 , 1, 0x23, // Power control VRH[5:0]
ILI9341_2_PWCTR2 , 1, 0x10, // Power control SAP[2:0];BT[3:0]
ILI9341_2_VMCTR1 , 2, 0x3e, 0x28, // VCM control
ILI9341_2_VMCTR2 , 1, 0x86, // VCM control2
ILI9341_2_MADCTL , 1, 0x48, // Memory Access Control
ILI9341_2_VSCRSADD, 1, 0x00, // Vertical scroll zero
ILI9341_2_PIXFMT , 1, 0x55,
ILI9341_2_FRMCTR1 , 2, 0x00, 0x18,
ILI9341_2_DFUNCTR , 3, 0x08, 0x82, 0x27, // Display Function Control
0xF2, 1, 0x00, // 3Gamma Function Disable
ILI9341_2_GAMMASET , 1, 0x01, // Gamma curve selected
ILI9341_2_GMCTRP1 , 15, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, // Set Gamma
0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
ILI9341_2_GMCTRN1 , 15, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, // Set Gamma
0x31, 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
ILI9341_2_SLPOUT , 0x80, // Exit Sleep
ILI9341_2_DISPON , 0x80, // Display on
// ILI9341_2_DISPOFF , 0x80, // Display on
0x00 // End of list
};
static const uint8_t PROGMEM ili9342_initcmd[] = {
0xEF, 3, 0x03, 0x80, 0x02,
0xCF, 3, 0x00, 0xC1, 0x30,
0xED, 4, 0x64, 0x03, 0x12, 0x81,
0xE8, 3, 0x85, 0x00, 0x78,
0xCB, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
0xF7, 1, 0x20,
0xEA, 2, 0x00, 0x00,
ILI9341_2_PWCTR1 , 1, 0x23, // Power control VRH[5:0]
ILI9341_2_PWCTR2 , 1, 0x10, // Power control SAP[2:0];BT[3:0]
ILI9341_2_VMCTR1 , 2, 0x2B, 0x2B, // 0x3e, 0x28, // VCM control
ILI9341_2_VMCTR2 , 1, 0xC0, // VCM control2
ILI9341_2_MADCTL , 1, 0x48, // Memory Access Control
ILI9341_2_VSCRSADD, 1, 0x00, // Vertical scroll zero
ILI9341_2_PIXFMT , 1, 0x55,
ILI9341_2_FRMCTR1 , 2, 0x00, 0x1B,
ILI9341_2_DFUNCTR , 3, 0x08, 0x82, 0x27, // Display Function Control
0xF2, 1, 0x00, // 3Gamma Function Disable
ILI9341_2_GAMMASET , 1, 0x01, // Gamma curve selected
ILI9341_2_GMCTRP1 , 15, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
ILI9341_2_GMCTRN1 , 15, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
ILI9341_2_INVON , 0x80,
ILI9341_2_SLPOUT , 0x80, // Exit Sleep
ILI9341_2_DISPON , 0x80, // Display on
0x00 // End of list
};
ILI9341_2::ILI9341_2(int8_t cs, int8_t mosi, int8_t miso, int8_t sclk, int8_t res, int8_t dc, int8_t bp, int8_t spibus, uint8_t dtype) : Renderer(ILI9341_TFTWIDTH, ILI9341_TFTHEIGHT) {
_cs = cs;
_mosi = mosi;
_miso = miso;
_sclk = sclk;
_res = res;
_dc = dc;
_bp = bp;
_hwspi = dtype; // sign ili9341 or 2
_spibus = spibus;
}
// special init for ILI9342 uses SPI1 previously defined with SDCard
ILI9341_2::ILI9341_2(int8_t cs, int8_t res, int8_t dc, int8_t bp) : Renderer(ILI9341_TFTWIDTH, ILI9341_TFTHEIGHT) {
_cs = cs;
_res = res;
_dc = dc;
_bp = bp;
_hwspi = 2; // sign ili9342
_spibus = 1;
}
#define ILI9341_2_CS_LOW if (_cs>=0) digitalWrite( _cs, LOW);
#define ILI9341_2_CS_HIGH if (_cs>=0) digitalWrite( _cs, HIGH);
void ILI9341_2::writecmd(uint8_t d) {
digitalWrite( _dc, LOW);
#ifdef ILI9341_2_HWSPI
spi2->write(d);
#else
spiwrite(d);
#endif
digitalWrite( _dc, HIGH);
}
void ILI9341_2::init(uint16_t width, uint16_t height) {
//sspi2 = SPISettings(2500000, MSBFIRST, SPI_MODE3);
if (_hwspi >= 2) {
iwidth = ILI9341_TFTWIDTH;
iheight = ILI9341_TFTHEIGHT;
} else {
iwidth = ILI9341_TFTHEIGHT;
iheight = ILI9341_TFTWIDTH;
}
#ifdef ILI9341_2_HWSPI
sspi2 = SPISettings(40000000, MSBFIRST, SPI_MODE0);
if (_hwspi >= 2) {
spi2 = &SPI;
#ifdef ESP32
if (_hwspi > 2) {
spi2->begin(_sclk, _miso, _mosi, -1);
}
#else
SPI.begin();
#endif // ESP32
} else {
#ifdef ESP32
if (_spibus == 2) {
spi2 = new SPIClass(HSPI);
} else {
spi2 = &SPI;
}
spi2->begin(_sclk, _miso, _mosi, -1);
#else
SPI.begin();
spi2 = &SPI;
#endif
}
#else
pinMode(_mosi, OUTPUT);
digitalWrite(_mosi,HIGH);
pinMode(_sclk, OUTPUT);
digitalWrite(_sclk,LOW);
pinMode(_miso, INPUT);
#endif
pinMode(_cs, OUTPUT);
digitalWrite(_cs,HIGH);
pinMode(_dc, OUTPUT);
digitalWrite(_dc,HIGH);
if (_bp >= 0) {
pinMode(_bp, OUTPUT);
digitalWrite(_bp,HIGH);
}
if (_res >= 0) {
pinMode(_res, OUTPUT);
digitalWrite(_res, HIGH);
delay(100);
digitalWrite(_res, LOW);
delay(100);
digitalWrite(_res, HIGH);
delay(200);
} else {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(ILI9341_2_SWRESET); // software reset
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
delay(150);
}
if (_bp >= 0) {
#ifdef ILI9341_2_DIMMER
ledcSetup(ESP32_PWM_CHANNEL, 4000, 8);
ledcAttachPin(_bp, ESP32_PWM_CHANNEL);
ledcWrite(ESP32_PWM_CHANNEL, 128);
#else
pinMode(_bp, OUTPUT);
#endif
}
uint8_t cmd, x, numArgs;
const uint8_t *addr;
if (_hwspi<2) {
addr = ili9341_2_initcmd;
} else {
addr = ili9342_initcmd;
}
SPI_BEGIN_TRANSACTION();
while ((cmd = pgm_read_byte(addr++)) > 0) {
ILI9341_2_CS_LOW
writecmd(cmd);
x = pgm_read_byte(addr++);
numArgs = x & 0x7F;
#ifdef ILI9341_2_HWSPI
while (numArgs--) spi2->write(pgm_read_byte(addr++));
#else
while (numArgs--) spiwrite(pgm_read_byte(addr++));
#endif
ILI9341_2_CS_HIGH
if (x & 0x80) delay(120);
}
SPI_END_TRANSACTION();
}
void ILI9341_2::DisplayInit(int8_t p,int8_t size,int8_t rot,int8_t font) {
// SPI_BEGIN_TRANSACTION();
// writecmd(ILI9341_2_INVOFF);
// SPI_END_TRANSACTION();
setRotation(rot);
setTextFont(font&3);
setTextSize(size&7);
setTextColor(ILI9341_WHITE,ILI9341_BLACK);
setCursor(0,0);
fillScreen(ILI9341_BLACK);
}
void ILI9341_2::setAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
if (!x0 && !y0 && !x1 && !y1) {
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
} else {
ILI9341_2_CS_LOW
SPI_BEGIN_TRANSACTION();
setAddrWindow_int(x0,y0,x1-x0,y1-y0);
}
}
void ILI9341_2::pushColors(uint16_t *data, uint16_t len, boolean first) {
uint16_t color;
while (len--) {
color = *data++;
#ifdef ILI9341_2_HWSPI
spi2->write16(color);
#else
spiwrite16(color);
#endif
}
}
void ILI9341_2::setAddrWindow_int(uint16_t x, uint16_t y, uint16_t w, uint16_t h) {
uint32_t xa = ((uint32_t)x << 16) | (x+w-1);
uint32_t ya = ((uint32_t)y << 16) | (y+h-1);
writecmd(ILI9341_2_CASET); // Column addr set
#ifdef ILI9341_2_HWSPI
spi2->write32(xa);
#else
spiwrite32(xa);
#endif
writecmd(ILI9341_2_PASET); // Row addr set
#ifdef ILI9341_2_HWSPI
spi2->write32(ya);
#else
spiwrite32(ya);
#endif
writecmd(ILI9341_2_RAMWR); // write to RAM
}
void ILI9341_2::drawPixel(int16_t x, int16_t y, uint16_t color) {
if((x < 0) ||(x >= _width) || (y < 0) || (y >= _height)) return;
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
setAddrWindow_int(x,y,1,1);
#ifdef ILI9341_2_HWSPI
spi2->write16(color);
#else
spiwrite16(color);
#endif
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::setRotation(uint8_t m) {
if (_hwspi < 2) {
rotation = m % 4; // can't be higher than 3
switch (rotation) {
case 0:
m = (MADCTL_2_MX | MADCTL_2_BGR);
_width = iwidth;
_height = iheight;
break;
case 1:
m = (MADCTL_2_MV | MADCTL_2_BGR);
_width = iheight;
_height = iwidth;
break;
case 2:
m = (MADCTL_2_MY | MADCTL_2_BGR);
_width = iwidth;
_height = iheight;
break;
case 3:
m = (MADCTL_2_MX | MADCTL_2_MY | MADCTL_2_MV | MADCTL_2_BGR);
_width = iheight;
_height = iwidth;
break;
}
} else {
#define MADCTL_MY 0x80 ///< Bottom to top
#define MADCTL_MX 0x40 ///< Right to left
#define MADCTL_MV 0x20 ///< Reverse Mode
#define MADCTL_ML 0x10 ///< LCD refresh Bottom to top
#define MADCTL_RGB 0x00 ///< Red-Green-Blue pixel order
#define MADCTL_BGR 0x08 ///< Blue-Green-Red pixel order
#define MADCTL_MH 0x04 ///< LCD refresh right to left
rotation = m % 4; // can't be higher than 3
switch (rotation) {
case 0:
m = (MADCTL_BGR);
_width = iwidth;
_height = iheight;
break;
case 1:
m = (MADCTL_MY | MADCTL_MV | MADCTL_BGR);
_width = iheight;
_height = iwidth;
break;
case 2:
m = (MADCTL_MY | MADCTL_MX | MADCTL_BGR);
_width = iwidth;
_height = iheight;
break;
case 3:
m = (MADCTL_MX | MADCTL_MV | MADCTL_BGR);
_width = iheight;
_height = iwidth;
break;
}
}
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(ILI9341_2_MADCTL);
spiwrite(m);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color) {
// Rudimentary clipping
if ((x >= _width) || (y >= _height)) return;
if ((y + h - 1) >= _height) h = _height - y;
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
setAddrWindow_int(x, y, 1, h);
while (h--) {
#ifdef ILI9341_2_HWSPI
spi2->write16(color);
#else
spiwrite16(color);
#endif
}
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color) {
// Rudimentary clipping
if((x >= _width) || (y >= _height)) return;
if((x+w-1) >= _width) w = _width-x;
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
setAddrWindow_int(x, y, w, 1);
while (w--) {
#ifdef ILI9341_2_HWSPI
spi2->write16(color);
#else
spiwrite16(color);
#endif
}
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::fillScreen(uint16_t color) {
fillRect(0, 0, _width, _height, color);
}
// fill a rectangle
void ILI9341_2::fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color) {
// rudimentary clipping (drawChar w/big text requires this)
if((x >= _width) || (y >= _height)) return;
if((x + w - 1) >= _width) w = _width - x;
if((y + h - 1) >= _height) h = _height - y;
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
setAddrWindow_int(x, y, w, h);
for (y=h; y>0; y--) {
for (x=w; x>0; x--) {
#ifdef ILI9341_2_HWSPI
spi2->write16(color);
#else
spiwrite16(color);
#endif
}
}
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ili9342_bpwr(uint8_t on);
void ILI9341_2::DisplayOnff(int8_t on) {
if ((_hwspi >= 2) && (_bp < 0)) {
//ili9342_bpwr(on);
if (pwr_cbp) {
pwr_cbp(on);
}
}
if (on) {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(ILI9341_2_DISPON);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
if (_bp >= 0) {
#ifdef ILI9341_2_DIMMER
ledcWrite(ESP32_PWM_CHANNEL, dimmer);
#else
digitalWrite(_bp, HIGH);
#endif
}
} else {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(ILI9341_2_DISPOFF);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
if (_bp >= 0) {
#ifdef ILI9341_2_DIMMER
ledcWrite(ESP32_PWM_CHANNEL, 0);
#else
digitalWrite(_bp, LOW);
#endif
}
}
}
void ILI9341_2::invertDisplay(boolean i) {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(i ? ILI9341_2_INVON : ILI9341_2_INVOFF);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::reverseDisplay(boolean i) {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
if (i) {
writecmd(ILI9341_2_FRMCTR1);
spiwrite(0x00);
spiwrite(0x13);
writecmd(ILI9341_2_MADCTL);
spiwrite(0x01);
spiwrite(0x08);
} else {
writecmd(ILI9341_2_FRMCTR1);
spiwrite(0x00);
spiwrite(0x18);
writecmd(ILI9341_2_MADCTL);
spiwrite(0x01);
spiwrite(0x48);
}
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ili9342_dimm(uint8_t dim);
// dimmer 0-100
void ILI9341_2::dim(uint8_t dim) {
dimmer = dim;
if (dimmer>15) dimmer=15;
dimmer=((float)dimmer/15.0)*255.0;
#ifdef ESP32
if (_bp>=0) {
ledcWrite(ESP32_PWM_CHANNEL,dimmer);
} else {
if (_hwspi>=2) {
//ili9342_dimm(dim);
if (dim_cbp) {
dim_cbp(dim);
}
}
}
#endif
}
void ILI9341_2::spiwrite(uint8_t c) {
#ifdef ILI9341_2_HWSPI
spi2->write(c);
#else
for (uint8_t bit = 0x80; bit; bit >>= 1) {
digitalWrite(_sclk, LOW);
if (c & bit) digitalWrite(_mosi, HIGH);
else digitalWrite(_mosi, LOW);
digitalWrite(_sclk, HIGH);
}
#endif
}
void ILI9341_2::spiwrite16(uint16_t c) {
#ifdef ILI9341_2_HWSPI
spi2->write16(c);
#else
spiwrite(c>>8);
spiwrite(c);
#endif
}
void ILI9341_2::spiwrite32(uint32_t c) {
#ifdef ILI9341_2_HWSPI
spi2->write32(c);
#else
spiwrite(c>>24);
spiwrite(c>>16);
spiwrite(c>>8);
spiwrite(c);
#endif
}
void ILI9341_2::setScrollMargins(uint16_t top, uint16_t bottom) {
uint16_t height = _height - (top + bottom);
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(0x33);
spiwrite16(top);
spiwrite16(height);
spiwrite16(bottom);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}
void ILI9341_2::scrollTo(uint16_t y) {
SPI_BEGIN_TRANSACTION();
ILI9341_2_CS_LOW
writecmd(ILI9341_2_VSCRSADD);
spiwrite16(y);
ILI9341_2_CS_HIGH
SPI_END_TRANSACTION();
}