mirror of https://github.com/arendst/Tasmota.git
62 lines
1.4 KiB
INI
62 lines
1.4 KiB
INI
; PlatformIO Project Configuration File
|
|
;
|
|
; Example config for flashing nodemcuv2 boards via linux serial port
|
|
;
|
|
; Adapt (e.g. platform, board, port) to your environment as needed.
|
|
; Then call platformio.sh to copy the file to all examples.
|
|
; Now cd to the example directory (e.g. Autogain/) and do "pio run"
|
|
; to build it or directly upload with "pio run --target upload".
|
|
; Watch the serial output of your sketch with "pio device monitor".
|
|
;
|
|
; Build options: build flags, source filter
|
|
; Upload options: custom upload port, speed and extra flags
|
|
; Library options: dependencies, extra library storages
|
|
; Advanced options: extra scripting
|
|
;
|
|
; Please visit documentation for the other options and examples
|
|
; http://docs.platformio.org/page/projectconf.html
|
|
|
|
|
|
[platformio]
|
|
src_dir = .
|
|
lib_dir = ../..
|
|
|
|
; uncomment one, if you want to build only one
|
|
; env_default = nodemcuv2
|
|
; env_default = nano328
|
|
|
|
[env:nodemcuv2]
|
|
; TSL <-> ESP8266
|
|
; ------------
|
|
; GND <-> GND
|
|
; VCC <-> 3V
|
|
; SCL <-> D1
|
|
; SDA <-> D2
|
|
platform = espressif8266
|
|
board = nodemcuv2
|
|
framework = arduino
|
|
build_flags = -Wall
|
|
|
|
monitor_speed = 115200
|
|
|
|
upload_speed = 230400
|
|
upload_resetmethod = nodemcu
|
|
;usually upload port is autodetected
|
|
;upload_port = /dev/ttyUSB[1-9]
|
|
|
|
|
|
[env:nano328]
|
|
; TSL <-> NANO
|
|
; ------------
|
|
; GND <-> GND
|
|
; VCC <-> 3V3
|
|
; SCL <-> A5
|
|
; SDA <-> A4
|
|
platform = atmelavr
|
|
board = nanoatmega328
|
|
framework = arduino
|
|
build_flags = -Wall
|
|
|
|
monitor_speed = 115200
|
|
;upload_port = /dev/ttyUSB[1-9]
|