Tasmota/tasmota/xnrg_17_ornowe517.ino

232 lines
6.7 KiB
C++

/*
xnrg_17_ornowe512.ino - Orno WE517-Modbus energy meter support for Tasmota
Copyright (C) 2020 Maxime Vincent - based on the work of Gennaro Tortone and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ENERGY_SENSOR
#ifdef USE_WE517
/*********************************************************************************************\
* Orno WE517-Modbus energy meter
*
* [SetOption72: Set reference used for total energy]
* This driver supports SetOption72 = 1, which enables the use of Hardware Energy Totals,
* (as apposed to software energy totals kept in Tasmota flash memory)
\*********************************************************************************************/
#define XNRG_17 17
// can be user defined in my_user_config.h
#ifndef WE517_SPEED
#define WE517_SPEED 9600 // default WE517 Modbus address
#endif
// can be user defined in my_user_config.h
#ifndef WE517_ADDR
#define WE517_ADDR 1 // default WE517 Modbus address
#endif
#define FUNCTION_CODE_READ_HOLDING_REGISTERS (0x03)
#include <TasmotaModbus.h>
TasmotaModbus *We517Modbus;
const uint16_t we517_start_addresses[] {
/* */ // 3P4 3P3 1P2 Unit Description
/* 0 */ 0x000E, // + - + V Phase 1 line to neutral volts
/* 1 */ 0x0010, // + - - V Phase 2 line to neutral volts
/* 2 */ 0x0012, // + - - V Phase 3 line to neutral volts
/* 3 */ 0x0016, // + + + A Phase 1 current
/* 4 */ 0x0018, // + + - A Phase 2 current
/* 5 */ 0x001A, // + + - A Phase 3 current
/* 6 */ 0x001E, // + - + kW Phase 1 power
/* 7 */ 0x0020, // + - + kW Phase 2 power
/* 8 */ 0x0022, // + - - kW Phase 3 power
/* 9 */ 0x0026, // + - + VAr Phase 1 volt amps reactive
/* 10 */ 0x0026, // + - - VAr Phase 2 volt amps reactive
/* 11 */ 0x002A, // + - - VAr Phase 3 volt amps reactive
/* 12 */ 0x0036, // + - + Phase 1 power factor
/* 13 */ 0x0038, // + - - Phase 2 power factor
/* 14 */ 0x003A, // + - - Phase 3 power factor
/* 15 */ 0x0014, // + + + Hz Frequency of supply voltages
/* 16 */ 0x0100 // + + + kWh Total active energy
};
struct WE517 {
uint8_t read_state = 0;
uint8_t send_retry = 0;
} We517;
/*********************************************************************************************/
void WE517Every250ms(void)
{
bool data_ready = We517Modbus->ReceiveReady();
if (data_ready) {
uint8_t buffer[14]; // At least 5 + (2 * 2) = 9
uint32_t error = We517Modbus->ReceiveBuffer(buffer, 2);
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, buffer, We517Modbus->ReceiveCount());
if (error) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("ORNO: WE517 error %d"), error);
} else {
Energy.data_valid[0] = 0;
Energy.data_valid[1] = 0;
Energy.data_valid[2] = 0;
// 0 1 2 3 4 5 6 7 8
// SA FC BC Fh Fl Sh Sl Cl Ch
// 01 04 04 43 66 33 34 1B 38 = 230.2 Volt
float value;
((uint8_t*)&value)[3] = buffer[3]; // Get float values
((uint8_t*)&value)[2] = buffer[4];
((uint8_t*)&value)[1] = buffer[5];
((uint8_t*)&value)[0] = buffer[6];
switch(We517.read_state) {
case 0:
Energy.voltage[0] = value;
break;
case 1:
Energy.voltage[1] = value;
break;
case 2:
Energy.voltage[2] = value;
break;
case 3:
Energy.current[0] = value;
break;
case 4:
Energy.current[1] = value;
break;
case 5:
Energy.current[2] = value;
break;
case 6:
Energy.active_power[0] = value * 1000;
break;
case 7:
Energy.active_power[1] = value * 1000;
break;
case 8:
Energy.active_power[2] = value * 1000;
break;
case 9:
Energy.reactive_power[0] = value;
break;
case 10:
Energy.reactive_power[1] = value;
break;
case 11:
Energy.reactive_power[2] = value;
break;
case 12:
Energy.power_factor[0] = value;
break;
case 13:
Energy.power_factor[1] = value;
break;
case 14:
Energy.power_factor[2] = value;
break;
case 15:
Energy.frequency[0] = value;
break;
case 16:
EnergyUpdateTotal(value, true);
break;
}
We517.read_state++;
if (sizeof(we517_start_addresses)/2 == We517.read_state) {
We517.read_state = 0;
}
}
} // end data ready
if (0 == We517.send_retry || data_ready) {
We517.send_retry = 5;
We517Modbus->Send(WE517_ADDR, FUNCTION_CODE_READ_HOLDING_REGISTERS, we517_start_addresses[We517.read_state], 2);
} else {
We517.send_retry--;
}
}
void We517SnsInit(void)
{
We517Modbus = new TasmotaModbus(Pin(GPIO_WE517_RX), Pin(GPIO_WE517_TX));
uint8_t result = We517Modbus->Begin(WE517_SPEED);
if (result) {
if (2 == result) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("ORNO: WE517 HW serial init 8E1 at %d baud"), WE517_SPEED);
Serial.begin(WE517_SPEED, SERIAL_8E1);
ClaimSerial();
}
Energy.phase_count = 3;
Energy.frequency_common = true; // Use common frequency
} else {
TasmotaGlobal.energy_driver = ENERGY_NONE;
}
}
void We517DrvInit(void)
{
if (PinUsed(GPIO_WE517_RX) && PinUsed(GPIO_WE517_TX)) {
TasmotaGlobal.energy_driver = XNRG_17;
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xnrg17(uint8_t function)
{
bool result = false;
switch (function) {
case FUNC_EVERY_250_MSECOND:
WE517Every250ms();
break;
case FUNC_INIT:
We517SnsInit();
break;
case FUNC_PRE_INIT:
We517DrvInit();
break;
}
return result;
}
#endif // USE_WE517
#endif // USE_ENERGY_SENSOR