mirror of https://github.com/arendst/Tasmota.git
697 lines
30 KiB
C
697 lines
30 KiB
C
/*
|
|
tasmota_template_ESP32.h - ESP32 template settings for Tasmota
|
|
|
|
Copyright (C) 2020 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _TASMOTA_TEMPLATE_ESP32_H_
|
|
#define _TASMOTA_TEMPLATE_ESP32_H_
|
|
|
|
#ifdef ESP32
|
|
|
|
// Hardware has no ESP32
|
|
#undef USE_TUYA_DIMMER
|
|
#undef USE_PWM_DIMMER
|
|
#undef USE_EXS_DIMMER
|
|
#undef USE_ARMTRONIX_DIMMERS
|
|
#undef USE_SONOFF_RF
|
|
#undef USE_SONOFF_SC
|
|
#undef USE_SONOFF_IFAN
|
|
#undef USE_SONOFF_L1
|
|
#undef USE_SONOFF_D1
|
|
#undef USE_RF_FLASH
|
|
|
|
// Not ported (yet)
|
|
#undef USE_DISCOVERY
|
|
#undef USE_ADC_VCC // Needs to be ported
|
|
#undef USE_DEEPSLEEP
|
|
#undef USE_MY92X1
|
|
#undef USE_TUYA_MCU
|
|
#undef USE_PS_16_DZ
|
|
|
|
enum UserSelectablePins {
|
|
GPIO_NONE, // Not used
|
|
GPIO_KEY1, GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, // 4 x Button
|
|
GPIO_SWT1, GPIO_SWT1_NP, // 8 x User connected external switches
|
|
GPIO_REL1, GPIO_REL1_INV, // 8 x Relays
|
|
GPIO_LED1, GPIO_LED1_INV, // 4 x Leds
|
|
GPIO_CNTR1, GPIO_CNTR1_NP, // 4 x Counter
|
|
GPIO_PWM1, GPIO_PWM1_INV, // 5 x PWM
|
|
GPIO_BUZZER, GPIO_BUZZER_INV, // Buzzer
|
|
GPIO_LEDLNK, GPIO_LEDLNK_INV, // Link led
|
|
GPIO_I2C_SCL, GPIO_I2C_SDA, // Software I2C
|
|
GPIO_SPI_MISO, GPIO_SPI_MOSI, GPIO_SPI_CLK, GPIO_SPI_CS, GPIO_SPI_DC, // Hardware SPI
|
|
GPIO_SSPI_MISO, GPIO_SSPI_MOSI, GPIO_SSPI_SCLK, GPIO_SSPI_CS, GPIO_SSPI_DC, // Software SPI
|
|
GPIO_BACKLIGHT, // Display backlight control
|
|
GPIO_OLED_RESET, // OLED Display Reset
|
|
GPIO_IRSEND, GPIO_IRRECV, // IR interface
|
|
GPIO_RFSEND, GPIO_RFRECV, // RF interface
|
|
GPIO_DHT11, GPIO_DHT22, GPIO_SI7021, GPIO_DHT11_OUT, // DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
|
|
GPIO_DSB, GPIO_DSB_OUT, // DS18B20 or DS18S20
|
|
GPIO_WS2812, // WS2812 Led string
|
|
GPIO_MHZ_TXD, GPIO_MHZ_RXD, // MH-Z19 Serial interface
|
|
GPIO_PZEM0XX_TX, GPIO_PZEM004_RX, GPIO_PZEM016_RX, GPIO_PZEM017_RX, // PZEM Serial Modbus interface
|
|
GPIO_SAIR_TX, GPIO_SAIR_RX, // SenseAir Serial interface
|
|
GPIO_PMS5003_TX, GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface
|
|
GPIO_SDS0X1_TX, GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface
|
|
GPIO_SBR_TX, GPIO_SBR_RX, // Serial Bridge Serial interface
|
|
GPIO_SR04_TRIG, GPIO_SR04_ECHO, // SR04 interface
|
|
GPIO_SDM120_TX, GPIO_SDM120_RX, // SDM120 Serial interface
|
|
GPIO_SDM630_TX, GPIO_SDM630_RX, // SDM630 Serial interface
|
|
GPIO_TM16CLK, GPIO_TM16DIO, GPIO_TM16STB, // TM1638 interface
|
|
GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player
|
|
GPIO_HX711_SCK, GPIO_HX711_DAT, // HX711 Load Cell interface
|
|
GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin
|
|
GPIO_TUYA_TX, GPIO_TUYA_RX, // Tuya Serial interface
|
|
GPIO_MGC3130_XFER, GPIO_MGC3130_RESET, // MGC3130 interface
|
|
GPIO_RF_SENSOR, // Rf receiver with sensor decoding
|
|
GPIO_AZ_TXD, GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface
|
|
GPIO_MAX31855CS, GPIO_MAX31855CLK, GPIO_MAX31855DO, // MAX31855 Serial interface
|
|
GPIO_NRG_SEL, GPIO_NRG_SEL_INV, GPIO_NRG_CF1, GPIO_HLW_CF, GPIO_HJL_CF, // HLW8012/HJL-01/BL0937 energy monitoring
|
|
GPIO_MCP39F5_TX, GPIO_MCP39F5_RX, GPIO_MCP39F5_RST, // MCP39F501 Energy monitoring (Shelly2)
|
|
GPIO_PN532_TXD, GPIO_PN532_RXD, // PN532 NFC Serial interface
|
|
GPIO_SM16716_CLK, GPIO_SM16716_DAT, GPIO_SM16716_SEL, // SM16716 SELECT
|
|
GPIO_DI, GPIO_DCKI, // my92x1 PWM controller
|
|
GPIO_CSE7766_TX, GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2)
|
|
GPIO_ARIRFRCV, GPIO_ARIRFSEL, // Arilux RF Receive input
|
|
GPIO_TXD, GPIO_RXD, // Serial interface
|
|
GPIO_ROT1A, GPIO_ROT1B, GPIO_ROT2A, GPIO_ROT2B, // Rotary switch
|
|
GPIO_HRE_CLOCK, GPIO_HRE_DATA, // HR-E Water Meter
|
|
GPIO_ADE7953_IRQ, // ADE7953 IRQ
|
|
GPIO_SOLAXX1_TX, GPIO_SOLAXX1_RX, // Solax Inverter Serial interface
|
|
GPIO_ZIGBEE_TX, GPIO_ZIGBEE_RX, // Zigbee Serial interface
|
|
GPIO_RDM6300_RX, // RDM6300 RX
|
|
GPIO_IBEACON_TX, GPIO_IBEACON_RX, // HM17 IBEACON Serial interface
|
|
GPIO_A4988_DIR, GPIO_A4988_STP, GPIO_A4988_ENA, // A4988 interface
|
|
GPIO_A4988_MS1, GPIO_A4988_MS2, GPIO_A4988_MS3, // A4988 microstep
|
|
GPIO_DDS2382_TX, GPIO_DDS2382_RX, // DDS2382 Serial interface
|
|
GPIO_DDSU666_TX, GPIO_DDSU666_RX, // DDSU666 Serial interface
|
|
GPIO_SM2135_CLK, GPIO_SM2135_DAT, // SM2135 PWM controller
|
|
GPIO_DEEPSLEEP, // Kill switch for deepsleep
|
|
GPIO_EXS_ENABLE, // EXS MCU Enable
|
|
GPIO_TASMOTACLIENT_TXD, GPIO_TASMOTACLIENT_RXD, // Client Serial interface
|
|
GPIO_TASMOTACLIENT_RST, GPIO_TASMOTACLIENT_RST_INV, // Client Reset
|
|
GPIO_HPMA_RX, GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
|
|
GPIO_GPS_RX, GPIO_GPS_TX, // GPS Serial interface
|
|
GPIO_HM10_RX, GPIO_HM10_TX, // HM10-BLE-Mijia-bridge Serial interface
|
|
GPIO_LE01MR_RX, GPIO_LE01MR_TX, // F&F LE-01MR energy meter
|
|
GPIO_CC1101_GDO0, GPIO_CC1101_GDO2, // CC1101 Serial interface
|
|
GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor
|
|
GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX
|
|
GPIO_AS3935,
|
|
ADC0_INPUT, // Analog input
|
|
ADC0_TEMP, // Analog Thermistor
|
|
ADC0_LIGHT, // Analog Light sensor
|
|
ADC0_BUTTON, ADC0_BUTTON_INV, // Analog Button
|
|
ADC0_RANGE, // Analog Range
|
|
ADC0_CT_POWER, // ANalog Current
|
|
GPIO_WEBCAM_PWDN, GPIO_WEBCAM_RESET, GPIO_WEBCAM_XCLK, // Webcam
|
|
GPIO_WEBCAM_SIOD, GPIO_WEBCAM_SIOC, // Webcam I2C
|
|
GPIO_WEBCAM_DATA,
|
|
GPIO_WEBCAM_VSYNC, GPIO_WEBCAM_HREF, GPIO_WEBCAM_PCLK,
|
|
GPIO_WEBCAM_PSCLK,
|
|
GPIO_WEBCAM_HSD,
|
|
GPIO_WEBCAM_PSRCS,
|
|
GPIO_BOILER_OT_RX, GPIO_BOILER_OT_TX, // OpenTherm Boiler TX pin
|
|
GPIO_WINDMETER_SPEED, // WindMeter speed counter pin
|
|
GPIO_KEY1_TC, // Touch pin as button
|
|
GPIO_BL0940_RX, // BL0940 serial interface
|
|
GPIO_TCP_TX, GPIO_TCP_RX, // TCP to serial bridge
|
|
GPIO_ETH_PHY_POWER, GPIO_ETH_PHY_MDC, GPIO_ETH_PHY_MDIO, // Ethernet
|
|
GPIO_TELEINFO_RX, // Teleinfo telemetry data receive pin
|
|
GPIO_TELEINFO_ENABLE, // Teleinfo Enable Receive Pin
|
|
GPIO_LMT01, // LMT01 input counting pin
|
|
GPIO_SENSOR_END };
|
|
|
|
enum ProgramSelectablePins {
|
|
// GPIO_FIX_START = 254,
|
|
GPIO_FIX_START = 2046,
|
|
GPIO_USER, // User configurable needs to be 2047
|
|
GPIO_MAX };
|
|
|
|
// Text in webpage Module Parameters and commands GPIOS and GPIO
|
|
const char kSensorNames[] PROGMEM =
|
|
D_SENSOR_NONE "|"
|
|
D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "_n|" D_SENSOR_BUTTON "_i|" D_SENSOR_BUTTON "_in|"
|
|
D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "_n|"
|
|
D_SENSOR_RELAY "|" D_SENSOR_RELAY "_i|"
|
|
D_SENSOR_LED "|" D_SENSOR_LED "_i|"
|
|
D_SENSOR_COUNTER "|" D_SENSOR_COUNTER "_n|"
|
|
D_SENSOR_PWM "|" D_SENSOR_PWM "_i|"
|
|
D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "_i|"
|
|
D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "_i|"
|
|
D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
|
|
D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|"
|
|
D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|"
|
|
D_SENSOR_BACKLIGHT "|" D_SENSOR_OLED_RESET "|"
|
|
D_SENSOR_IRSEND "|" D_SENSOR_IRRECV "|"
|
|
D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|"
|
|
D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DHT11 "_o|"
|
|
D_SENSOR_DS18X20 "|" D_SENSOR_DS18X20 "_o|"
|
|
D_SENSOR_WS2812 "|"
|
|
D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
|
|
D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|"
|
|
D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
|
|
D_SENSOR_PMS5003_TX "|" D_SENSOR_PMS5003_RX "|"
|
|
D_SENSOR_SDS0X1_TX "|" D_SENSOR_SDS0X1_RX "|"
|
|
D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
|
|
D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
|
|
D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
|
|
D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|"
|
|
D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|"
|
|
D_SENSOR_DFR562 "|"
|
|
D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|"
|
|
D_SENSOR_TX2X_TX "|"
|
|
D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|"
|
|
D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|"
|
|
D_SENSOR_RF_SENSOR "|"
|
|
D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|"
|
|
D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|"
|
|
D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "_i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|"
|
|
D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|"
|
|
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|"
|
|
D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|"
|
|
D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|"
|
|
D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|"
|
|
D_SENSOR_ARIRFRCV "|" D_SENSOR_ARIRFSEL "|"
|
|
D_SENSOR_TXD "|" D_SENSOR_RXD "|"
|
|
D_SENSOR_ROTARY "_1a|" D_SENSOR_ROTARY "_1b|" D_SENSOR_ROTARY "_2a|" D_SENSOR_ROTARY "_2b|"
|
|
D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|"
|
|
D_SENSOR_ADE7953_IRQ "|"
|
|
D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|"
|
|
D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|"
|
|
D_SENSOR_RDM6300_RX "|"
|
|
D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|"
|
|
D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|" D_SENSOR_A4988_MS2 "|" D_SENSOR_A4988_MS3 "|"
|
|
D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|"
|
|
D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|"
|
|
D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|"
|
|
D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|"
|
|
D_SENSOR_CLIENT_TX "|" D_SENSOR_CLIENT_RX "|" D_SENSOR_CLIENT_RESET "|" D_SENSOR_CLIENT_RESET "_i|"
|
|
D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|"
|
|
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|"
|
|
D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|"
|
|
D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|"
|
|
D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|"
|
|
D_SENSOR_HRXL_RX "|"
|
|
D_SENSOR_ELECTRIQ_MOODL "|"
|
|
D_SENSOR_AS3935 "|"
|
|
D_ANALOG_INPUT "|"
|
|
D_TEMPERATURE "|" D_LIGHT "|"
|
|
D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "_i|"
|
|
D_RANGE "|"
|
|
D_CT_POWER "|"
|
|
D_GPIO_WEBCAM_PWDN "|" D_GPIO_WEBCAM_RESET "|" D_GPIO_WEBCAM_XCLK "|"
|
|
D_GPIO_WEBCAM_SIOD "|" D_GPIO_WEBCAM_SIOC "|"
|
|
D_GPIO_WEBCAM_DATA "|"
|
|
D_GPIO_WEBCAM_VSYNC "|" D_GPIO_WEBCAM_HREF "|" D_GPIO_WEBCAM_PCLK "|"
|
|
D_GPIO_WEBCAM_PSCLK "|"
|
|
D_GPIO_WEBCAM_HSD "|"
|
|
D_GPIO_WEBCAM_PSRCS "|"
|
|
D_SENSOR_BOILER_OT_RX "|" D_SENSOR_BOILER_OT_TX "|"
|
|
D_SENSOR_WINDMETER_SPEED "|" D_SENSOR_BUTTON "_tc|"
|
|
D_SENSOR_BL0940_RX "|"
|
|
D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|"
|
|
D_SENSOR_ETH_PHY_POWER "|" D_SENSOR_ETH_PHY_MDC "|" D_SENSOR_ETH_PHY_MDIO "|"
|
|
D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE "|"
|
|
D_SENSOR_LMT01_PULSE
|
|
;
|
|
|
|
const char kSensorNamesFixed[] PROGMEM =
|
|
D_SENSOR_USER;
|
|
|
|
#define MAX_WEBCAM_DATA 8
|
|
#define MAX_WEBCAM_HSD 3
|
|
|
|
const uint16_t kGpioNiceList[] PROGMEM = {
|
|
GPIO_NONE, // Not used
|
|
AGPIO(GPIO_KEY1) + MAX_KEYS, // Buttons
|
|
AGPIO(GPIO_KEY1_NP) + MAX_KEYS,
|
|
AGPIO(GPIO_KEY1_INV) + MAX_KEYS,
|
|
AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS,
|
|
AGPIO(GPIO_KEY1_TC) + MAX_KEYS, // Touch button
|
|
AGPIO(GPIO_SWT1) + MAX_SWITCHES, // User connected external switches
|
|
AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES,
|
|
AGPIO(GPIO_REL1) + MAX_RELAYS, // Relays
|
|
AGPIO(GPIO_REL1_INV) + MAX_RELAYS,
|
|
AGPIO(GPIO_LED1) + MAX_LEDS, // Leds
|
|
AGPIO(GPIO_LED1_INV) + MAX_LEDS,
|
|
#ifdef USE_COUNTER
|
|
AGPIO(GPIO_CNTR1) + MAX_COUNTERS, // Counters
|
|
AGPIO(GPIO_CNTR1_NP) + MAX_COUNTERS,
|
|
#endif
|
|
AGPIO(GPIO_PWM1) + MAX_PWMS, // RGB Red or C Cold White
|
|
AGPIO(GPIO_PWM1_INV) + MAX_PWMS,
|
|
#ifdef USE_BUZZER
|
|
AGPIO(GPIO_BUZZER), // Buzzer
|
|
AGPIO(GPIO_BUZZER_INV), // Inverted buzzer
|
|
#endif
|
|
AGPIO(GPIO_LEDLNK), // Link led
|
|
AGPIO(GPIO_LEDLNK_INV), // Inverted link led
|
|
#ifdef USE_I2C
|
|
AGPIO(GPIO_I2C_SCL), // I2C SCL
|
|
AGPIO(GPIO_I2C_SDA), // I2C SDA
|
|
#endif
|
|
#ifdef USE_SPI
|
|
AGPIO(GPIO_SPI_MISO), // SPI MISO
|
|
AGPIO(GPIO_SPI_MOSI), // SPI MOSI
|
|
AGPIO(GPIO_SPI_CLK), // SPI Clk
|
|
AGPIO(GPIO_SPI_CS), // SPI Chip Select
|
|
AGPIO(GPIO_SPI_DC), // SPI Data Direction
|
|
AGPIO(GPIO_SSPI_MISO), // Software SPI Master Input Client Output
|
|
AGPIO(GPIO_SSPI_MOSI), // Software SPI Master Output Client Input
|
|
AGPIO(GPIO_SSPI_SCLK), // Software SPI Serial Clock
|
|
AGPIO(GPIO_SSPI_CS), // Software SPI Chip Select
|
|
AGPIO(GPIO_SSPI_DC), // Software SPI Data or Command
|
|
#endif
|
|
#ifdef USE_DISPLAY
|
|
AGPIO(GPIO_BACKLIGHT), // Display backlight control
|
|
AGPIO(GPIO_OLED_RESET), // OLED Display Reset
|
|
#endif
|
|
|
|
AGPIO(GPIO_TXD), // Serial interface
|
|
AGPIO(GPIO_RXD), // Serial interface
|
|
|
|
#ifdef USE_DHT
|
|
AGPIO(GPIO_DHT11), // DHT11
|
|
AGPIO(GPIO_DHT22), // DHT21, DHT22, AM2301, AM2302, AM2321
|
|
AGPIO(GPIO_SI7021), // iTead SI7021
|
|
AGPIO(GPIO_DHT11_OUT), // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
|
|
#endif
|
|
#ifdef USE_DS18x20
|
|
AGPIO(GPIO_DSB), // Single wire DS18B20 or DS18S20
|
|
AGPIO(GPIO_DSB_OUT), // Pseudo Single wire DS18B20 or DS18S20
|
|
#endif
|
|
#ifdef USE_LMT01
|
|
AGPIO(GPIO_LMT01), // LMT01, count pulses on GPIO
|
|
#endif
|
|
|
|
// Light
|
|
#ifdef USE_LIGHT
|
|
#ifdef USE_WS2812
|
|
AGPIO(GPIO_WS2812), // WS2812 Led string
|
|
#endif
|
|
#ifdef USE_ARILUX_RF
|
|
AGPIO(GPIO_ARIRFRCV), // AriLux RF Receive input
|
|
AGPIO(GPIO_ARIRFSEL), // Arilux RF Receive input selected
|
|
#endif
|
|
#ifdef USE_MY92X1
|
|
AGPIO(GPIO_DI), // my92x1 PWM input
|
|
AGPIO(GPIO_DCKI), // my92x1 CLK input
|
|
#endif // USE_MY92X1
|
|
#ifdef USE_SM16716
|
|
AGPIO(GPIO_SM16716_CLK), // SM16716 CLOCK
|
|
AGPIO(GPIO_SM16716_DAT), // SM16716 DATA
|
|
AGPIO(GPIO_SM16716_SEL), // SM16716 SELECT
|
|
#endif // USE_SM16716
|
|
#ifdef USE_SM2135
|
|
AGPIO(GPIO_SM2135_CLK), // SM2135 CLOCK
|
|
AGPIO(GPIO_SM2135_DAT), // SM2135 DATA
|
|
#endif // USE_SM2135
|
|
#ifdef USE_TUYA_MCU
|
|
AGPIO(GPIO_TUYA_TX), // Tuya Serial interface
|
|
AGPIO(GPIO_TUYA_RX), // Tuya Serial interface
|
|
#endif
|
|
#ifdef USE_EXS_DIMMER
|
|
AGPIO(GPIO_EXS_ENABLE), // EXS MCU Enable
|
|
#endif
|
|
#ifdef USE_ELECTRIQ_MOODL
|
|
AGPIO(GPIO_ELECTRIQ_MOODL_TX),
|
|
#endif
|
|
#endif // USE_LIGHT
|
|
|
|
#if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL)
|
|
AGPIO(GPIO_IRSEND), // IR remote
|
|
#if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL)
|
|
AGPIO(GPIO_IRRECV), // IR receiver
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef USE_RC_SWITCH
|
|
AGPIO(GPIO_RFSEND), // RF transmitter
|
|
AGPIO(GPIO_RFRECV), // RF receiver
|
|
#endif
|
|
#ifdef USE_RF_SENSOR
|
|
AGPIO(GPIO_RF_SENSOR), // Rf receiver with sensor decoding
|
|
#endif
|
|
#ifdef USE_SR04
|
|
AGPIO(GPIO_SR04_TRIG), // SR04 Tri/TXgger pin
|
|
AGPIO(GPIO_SR04_ECHO), // SR04 Ech/RXo pin
|
|
#endif
|
|
#ifdef USE_TM1638
|
|
AGPIO(GPIO_TM16CLK), // TM1638 Clock
|
|
AGPIO(GPIO_TM16DIO), // TM1638 Data I/O
|
|
AGPIO(GPIO_TM16STB), // TM1638 Strobe
|
|
#endif
|
|
#ifdef USE_HX711
|
|
AGPIO(GPIO_HX711_SCK), // HX711 Load Cell clock
|
|
AGPIO(GPIO_HX711_DAT), // HX711 Load Cell data
|
|
#endif
|
|
|
|
// Energy sensors
|
|
#ifdef USE_ENERGY_SENSOR
|
|
#ifdef USE_HLW8012
|
|
AGPIO(GPIO_NRG_SEL), // HLW8012/HLJ-01 Sel output (1 = Voltage)
|
|
AGPIO(GPIO_NRG_SEL_INV), // HLW8012/HLJ-01 Sel output (0 = Voltage)
|
|
AGPIO(GPIO_NRG_CF1), // HLW8012/HLJ-01 CF1 voltage / current
|
|
AGPIO(GPIO_HLW_CF), // HLW8012 CF power
|
|
AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power
|
|
#endif
|
|
#if defined(USE_I2C) && defined(USE_ADE7953)
|
|
AGPIO(GPIO_ADE7953_IRQ), // ADE7953 IRQ
|
|
#endif
|
|
#ifdef USE_CSE7766
|
|
AGPIO(GPIO_CSE7766_TX), // CSE7766 Serial interface (S31 and Pow R2)
|
|
AGPIO(GPIO_CSE7766_RX), // CSE7766 Serial interface (S31 and Pow R2)
|
|
#endif
|
|
#ifdef USE_MCP39F501
|
|
AGPIO(GPIO_MCP39F5_TX), // MCP39F501 Serial interface (Shelly2)
|
|
AGPIO(GPIO_MCP39F5_RX), // MCP39F501 Serial interface (Shelly2)
|
|
AGPIO(GPIO_MCP39F5_RST), // MCP39F501 Reset (Shelly2)
|
|
#endif
|
|
#if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC)
|
|
AGPIO(GPIO_PZEM0XX_TX), // PZEM0XX Serial interface
|
|
#endif
|
|
#ifdef USE_PZEM004T
|
|
AGPIO(GPIO_PZEM004_RX), // PZEM004T Serial interface
|
|
#endif
|
|
#ifdef USE_PZEM_AC
|
|
AGPIO(GPIO_PZEM016_RX), // PZEM-014,016 Serial Modbus interface
|
|
#endif
|
|
#ifdef USE_PZEM_DC
|
|
AGPIO(GPIO_PZEM017_RX), // PZEM-003,017 Serial Modbus interface
|
|
#endif
|
|
#ifdef USE_SDM120
|
|
AGPIO(GPIO_SDM120_TX), // SDM120 Serial interface
|
|
AGPIO(GPIO_SDM120_RX), // SDM120 Serial interface
|
|
#endif
|
|
#ifdef USE_SDM630
|
|
AGPIO(GPIO_SDM630_TX), // SDM630 Serial interface
|
|
AGPIO(GPIO_SDM630_RX), // SDM630 Serial interface
|
|
#endif
|
|
#ifdef USE_DDS2382
|
|
AGPIO(GPIO_DDS2382_TX), // DDS2382 Serial interface
|
|
AGPIO(GPIO_DDS2382_RX), // DDS2382 Serial interface
|
|
#endif
|
|
#ifdef USE_DDSU666
|
|
AGPIO(GPIO_DDSU666_TX), // DDSU666 Serial interface
|
|
AGPIO(GPIO_DDSU666_RX), // DDSU666 Serial interface
|
|
#endif // USE_DDSU666
|
|
#ifdef USE_SOLAX_X1
|
|
AGPIO(GPIO_SOLAXX1_TX), // Solax Inverter tx pin
|
|
AGPIO(GPIO_SOLAXX1_RX), // Solax Inverter rx pin
|
|
#endif // USE_SOLAX_X1
|
|
#ifdef USE_LE01MR
|
|
AGPIO(GPIO_LE01MR_TX), // F7F LE-01MR energy meter tx pin
|
|
AGPIO(GPIO_LE01MR_RX), // F7F LE-01MR energy meter rx pin
|
|
#endif // IFDEF:USE_LE01MR
|
|
#ifdef USE_BL0940
|
|
AGPIO(GPIO_BL0940_RX), // BL0940 Serial interface
|
|
#endif
|
|
#endif // USE_ENERGY_SENSOR
|
|
|
|
// Serial
|
|
#ifdef USE_SERIAL_BRIDGE
|
|
AGPIO(GPIO_SBR_TX), // Serial Bridge Serial interface
|
|
AGPIO(GPIO_SBR_RX), // Serial Bridge Serial interface
|
|
#endif
|
|
#ifdef USE_TCP_BRIDGE
|
|
AGPIO(GPIO_TCP_TX), // TCP Serial bridge
|
|
AGPIO(GPIO_TCP_RX), // TCP Serial bridge
|
|
#endif
|
|
#ifdef USE_ZIGBEE
|
|
AGPIO(GPIO_ZIGBEE_TX), // Zigbee Serial interface
|
|
AGPIO(GPIO_ZIGBEE_RX), // Zigbee Serial interface
|
|
#endif
|
|
#ifdef USE_MHZ19
|
|
AGPIO(GPIO_MHZ_TXD), // MH-Z19 Serial interface
|
|
AGPIO(GPIO_MHZ_RXD), // MH-Z19 Serial interface
|
|
#endif
|
|
#ifdef USE_SENSEAIR
|
|
AGPIO(GPIO_SAIR_TX), // SenseAir Serial interface
|
|
AGPIO(GPIO_SAIR_RX), // SenseAir Serial interface
|
|
#endif
|
|
#ifdef USE_NOVA_SDS
|
|
AGPIO(GPIO_SDS0X1_TX), // Nova Fitness SDS011 Serial interface
|
|
AGPIO(GPIO_SDS0X1_RX), // Nova Fitness SDS011 Serial interface
|
|
#endif
|
|
#ifdef USE_HPMA
|
|
AGPIO(GPIO_HPMA_TX), // Honeywell HPMA115S0 Serial interface
|
|
AGPIO(GPIO_HPMA_RX), // Honeywell HPMA115S0 Serial interface
|
|
#endif
|
|
#ifdef USE_PMS5003
|
|
AGPIO(GPIO_PMS5003_TX), // Plantower PMS5003 Serial interface
|
|
AGPIO(GPIO_PMS5003_RX), // Plantower PMS5003 Serial interface
|
|
#endif
|
|
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR)
|
|
AGPIO(GPIO_TX2X_TXD_BLACK), // TX20/TX23 Transmission Pin
|
|
#endif
|
|
#ifdef USE_WINDMETER
|
|
GPIO_WINDMETER_SPEED,
|
|
#endif
|
|
#ifdef USE_MP3_PLAYER
|
|
AGPIO(GPIO_MP3_DFR562), // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface
|
|
#endif
|
|
#ifdef USE_AZ7798
|
|
AGPIO(GPIO_AZ_TXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
|
|
AGPIO(GPIO_AZ_RXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
|
|
#endif
|
|
#ifdef USE_PN532_HSU
|
|
AGPIO(GPIO_PN532_TXD), // PN532 HSU Tx
|
|
AGPIO(GPIO_PN532_RXD), // PN532 HSU Rx
|
|
#endif
|
|
#ifdef USE_TASMOTA_CLIENT
|
|
AGPIO(GPIO_TASMOTACLIENT_TXD), // Tasmota Client TX
|
|
AGPIO(GPIO_TASMOTACLIENT_RXD), // Tasmota Client RX
|
|
AGPIO(GPIO_TASMOTACLIENT_RST), // Tasmota Client Reset
|
|
AGPIO(GPIO_TASMOTACLIENT_RST_INV), // Tasmota Client Reset Inverted
|
|
#endif
|
|
#ifdef USE_RDM6300
|
|
AGPIO(GPIO_RDM6300_RX),
|
|
#endif
|
|
#ifdef USE_IBEACON
|
|
AGPIO(GPIO_IBEACON_TX),
|
|
AGPIO(GPIO_IBEACON_RX),
|
|
#endif
|
|
#ifdef USE_GPS
|
|
AGPIO(GPIO_GPS_TX), // GPS serial interface
|
|
AGPIO(GPIO_GPS_RX), // GPS serial interface
|
|
#endif
|
|
#ifdef USE_HM10
|
|
AGPIO(GPIO_HM10_TX), // GPS serial interface
|
|
AGPIO(GPIO_HM10_RX), // GPS serial interface
|
|
#endif
|
|
#ifdef USE_OPENTHERM
|
|
GPIO_BOILER_OT_TX,
|
|
GPIO_BOILER_OT_RX,
|
|
#endif
|
|
|
|
#ifdef USE_MGC3130
|
|
AGPIO(GPIO_MGC3130_XFER),
|
|
AGPIO(GPIO_MGC3130_RESET),
|
|
#endif
|
|
#ifdef USE_MAX31855
|
|
AGPIO(GPIO_MAX31855CS), // MAX31855 Serial interface
|
|
AGPIO(GPIO_MAX31855CLK), // MAX31855 Serial interface
|
|
AGPIO(GPIO_MAX31855DO), // MAX31855 Serial interface
|
|
#endif
|
|
#ifdef ROTARY_V1
|
|
AGPIO(GPIO_ROT1A), // Rotary switch1 A Pin
|
|
AGPIO(GPIO_ROT1B), // Rotary switch1 B Pin
|
|
AGPIO(GPIO_ROT2A), // Rotary switch2 A Pin
|
|
AGPIO(GPIO_ROT2B), // Rotary switch2 B Pin
|
|
#endif
|
|
#ifdef USE_HRE
|
|
AGPIO(GPIO_HRE_CLOCK),
|
|
AGPIO(GPIO_HRE_DATA),
|
|
#endif
|
|
#ifdef USE_A4988_STEPPER
|
|
AGPIO(GPIO_A4988_DIR), // A4988 direction pin
|
|
AGPIO(GPIO_A4988_STP), // A4988 step pin
|
|
// folowing are not mandatory
|
|
AGPIO(GPIO_A4988_ENA), // A4988 enabled pin
|
|
AGPIO(GPIO_A4988_MS1), // A4988 microstep pin1
|
|
AGPIO(GPIO_A4988_MS2), // A4988 microstep pin2
|
|
AGPIO(GPIO_A4988_MS3), // A4988 microstep pin3
|
|
#endif
|
|
#ifdef USE_DEEPSLEEP
|
|
AGPIO(GPIO_DEEPSLEEP),
|
|
#endif
|
|
#ifdef USE_KEELOQ
|
|
AGPIO(GPIO_CC1101_GDO0), // CC1101 pin for RX
|
|
AGPIO(GPIO_CC1101_GDO2), // CC1101 pin for RX
|
|
#endif
|
|
#ifdef USE_HRXL
|
|
AGPIO(GPIO_HRXL_RX),
|
|
#endif
|
|
#ifdef USE_AS3935
|
|
AGPIO(GPIO_AS3935),
|
|
#endif
|
|
#ifdef USE_TELEINFO
|
|
AGPIO(GPIO_TELEINFO_RX),
|
|
AGPIO(GPIO_TELEINFO_ENABLE),
|
|
#endif
|
|
/*
|
|
#ifndef USE_ADC_VCC
|
|
AGPIO(ADC0_INPUT), // Analog input
|
|
AGPIO(ADC0_TEMP), // Thermistor
|
|
AGPIO(ADC0_LIGHT), // Light sensor
|
|
AGPIO(ADC0_BUTTON), // Button
|
|
AGPIO(ADC0_BUTTON_INV),
|
|
AGPIO(ADC0_RANGE), // Range
|
|
AGPIO(ADC0_CT_POWER), // Current
|
|
#endif
|
|
*/
|
|
#ifdef USE_WEBCAM
|
|
AGPIO(GPIO_WEBCAM_PWDN),
|
|
AGPIO(GPIO_WEBCAM_RESET),
|
|
AGPIO(GPIO_WEBCAM_XCLK),
|
|
AGPIO(GPIO_WEBCAM_SIOD),
|
|
AGPIO(GPIO_WEBCAM_SIOC),
|
|
AGPIO(GPIO_WEBCAM_DATA) + MAX_WEBCAM_DATA,
|
|
AGPIO(GPIO_WEBCAM_VSYNC),
|
|
AGPIO(GPIO_WEBCAM_HREF),
|
|
AGPIO(GPIO_WEBCAM_PCLK),
|
|
AGPIO(GPIO_WEBCAM_PSCLK),
|
|
AGPIO(GPIO_WEBCAM_HSD) + MAX_WEBCAM_HSD,
|
|
AGPIO(GPIO_WEBCAM_PSRCS),
|
|
#endif
|
|
#ifdef USE_ETHERNET
|
|
AGPIO(GPIO_ETH_PHY_POWER),
|
|
AGPIO(GPIO_ETH_PHY_MDC),
|
|
AGPIO(GPIO_ETH_PHY_MDIO), // Ethernet
|
|
#endif
|
|
};
|
|
|
|
//********************************************************************************************
|
|
|
|
#define MAX_GPIO_PIN 40 // Number of supported GPIO
|
|
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
|
|
#define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
|
#define WEMOS_MODULE 0 // Wemos module
|
|
|
|
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839
|
|
const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOflashcFLFLolIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOA6A7A0IoIoA3";
|
|
|
|
//********************************************************************************************
|
|
|
|
typedef struct MYIO {
|
|
uint16_t io[MAX_GPIO_PIN];
|
|
} myio; // 40 * 2 = 80 bytes
|
|
|
|
typedef struct MYCFGIO {
|
|
uint16_t io[MAX_USER_PINS];
|
|
} mycfgio; // 36 * 2 = 72 bytes
|
|
|
|
#define GPIO_FLAG_USED 0 // Currently no flags used
|
|
|
|
typedef union {
|
|
uint16_t data;
|
|
struct {
|
|
uint16_t spare00 : 1;
|
|
uint16_t spare01 : 1;
|
|
uint16_t spare02 : 1;
|
|
uint16_t spare03 : 1;
|
|
uint16_t spare04 : 1;
|
|
uint16_t spare05 : 1;
|
|
uint16_t spare06 : 1;
|
|
uint16_t spare07 : 1;
|
|
uint16_t spare08 : 1;
|
|
uint16_t spare09 : 1;
|
|
uint16_t spare10 : 1;
|
|
uint16_t spare11 : 1;
|
|
uint16_t spare12 : 1;
|
|
uint16_t spare13 : 1;
|
|
uint16_t spare14 : 1;
|
|
uint16_t spare15 : 1;
|
|
};
|
|
} gpio_flag; // 2 bytes
|
|
|
|
typedef struct MYTMPLT {
|
|
mycfgio gp; // 72 bytes
|
|
gpio_flag flag; // 2 bytes
|
|
} mytmplt; // 74 bytes
|
|
|
|
/********************************************************************************************/
|
|
// Supported hardware modules
|
|
enum SupportedModules { WEMOS, ESP32_CAM_AITHINKER, MAXMODULE };
|
|
|
|
#define USER_MODULE 255
|
|
|
|
const char kModuleNames[] PROGMEM = "ESP32-DevKit|ESP32 Cam AiThinker";
|
|
|
|
// Default module settings
|
|
const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = { WEMOS, ESP32_CAM_AITHINKER };
|
|
|
|
const mytmplt kModules PROGMEM =
|
|
{ // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
|
|
AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
|
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
|
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
|
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
|
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
|
AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
|
// 6 IO GPIO6, Flash CLK
|
|
// 7 IO GPIO7, Flash D0
|
|
// 8 IO GPIO8, Flash D1
|
|
AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD
|
|
AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD
|
|
// 11 IO GPIO11, Flash CMD
|
|
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
|
AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
|
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
|
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
|
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
|
|
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
|
|
AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7
|
|
AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
|
0, // 20
|
|
AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN
|
|
AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
|
AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE
|
|
0, // 24
|
|
AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
|
AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
|
AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
|
0, // 28
|
|
0, // 29
|
|
0, // 30
|
|
0, // 31
|
|
AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
|
|
AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
|
AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
|
|
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
|
|
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
|
|
0, // 37 NO PULLUP
|
|
0, // 38 NO PULLUP
|
|
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
|
|
0 // Flag
|
|
};
|
|
|
|
/*********************************************************************************************\
|
|
Known templates
|
|
|
|
{"NAME":"AITHINKER CAM","GPIO":[4992,1,1,1,1,5088,1,1,1,1,1,1,1,1,5089,5090,0,5091,5184,5152,0,5120,5024,5056,0,0,0,0,4928,1,5094,5095,5092,0,0,5093],"FLAG":0,"BASE":1}
|
|
{"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
{"NAME":"wESP32","GPIO":[1,1,1,1,1,1,0,0,0,1,1,1,5568,5600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
{"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
|
|
\*********************************************************************************************/
|
|
|
|
#endif // ESP32
|
|
|
|
#endif // _TASMOTA_TEMPLATE_ESP32_H_
|