Tasmota/tasmota/xdsp_11_sevenseg.ino

382 lines
9.5 KiB
C++

/*
xdsp_11_sevenseg.ino - Display seven segment support for Tasmota
Copyright (C) 2020 Theo Arends and Adafruit
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_DISPLAY
#ifdef USE_DISPLAY_SEVENSEG
#define XDSP_11 11
#define XI2C_47 47 // See I2CDEVICES.md
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_LEDBackpack.h> // Seven segment LED
Adafruit_7segment *sevenseg[8];
uint8_t sevensegs = 0;
uint8_t sevenseg_state = 0;
/*********************************************************************************************/
void SevensegWrite(void)
{
for (uint32_t i = 0; i < sevensegs; i++) {
sevenseg[i]->writeDisplay();
}
}
void SevensegClear(void)
{
for (uint32_t i = 0; i < sevensegs; i++) {
sevenseg[i]->clear();
}
SevensegWrite();
}
/*********************************************************************************************/
void SevensegInitMode(void)
{
for (uint32_t i = 0; i < sevensegs; i++) {
sevenseg[i]->setBrightness(Settings.display_dimmer);
sevenseg[i]->blinkRate(0);
}
SevensegClear();
}
void SevensegInit(uint8_t mode)
{
switch(mode) {
case DISPLAY_INIT_MODE:
case DISPLAY_INIT_PARTIAL:
case DISPLAY_INIT_FULL:
SevensegInitMode();
break;
}
}
void SevensegInitDriver(void)
{
if (!Settings.display_model) {
if (I2cSetDevice(Settings.display_address[0])) {
Settings.display_model = XDSP_11;
}
}
if (XDSP_11 == Settings.display_model) {
sevenseg_state = 1;
for (sevensegs = 0; sevensegs < 8; sevensegs++) {
if (Settings.display_address[sevensegs]) {
I2cSetActiveFound(Settings.display_address[sevensegs], "SevenSeg");
sevenseg[sevensegs] = new Adafruit_7segment();
sevenseg[sevensegs]->begin(Settings.display_address[sevensegs]);
} else {
break;
}
}
Settings.display_width = 4;
Settings.display_height = sevensegs;
SevensegInitMode();
}
}
void SevensegOnOff(void)
{
if (!disp_power) { SevensegClear(); }
}
void SevensegDrawStringAt(uint16_t x, uint16_t y, char *str, uint16_t color, uint8_t flag)
{
enum OutNumType {DECIMAL, HEXADECIMAL, FLOAT, SEGMENTS};
int16_t number = 0;
double numberf = 0;
boolean hasnumber= false;
uint8_t dots= 0;
OutNumType outnumtype= DECIMAL;
uint8 fds = 0; // number of fractional digits for fp number
boolean done= false;
boolean s= false;
uint8_t unit= y;
char *buf;
if ((unit>=sevensegs) || (unit<0)) {
unit=0;
}
for (int i=0; (str[i]!='\0') && (!done); i++) {
// [optional prefix(es) chars]digits
// Some combinations won't make sense.
// Reference: https://cdn-learn.adafruit.com/downloads/pdf/adafruit-led-backpack.pdf
// This code has been tested on 1.2" and 0.56" 7-Segment LED displays, but should mostly work for others.
//
// Prefixes:
// x upcoming decimal integer number displayed as hex
// : turn on middle colon
// ^ turn on top left dot
// v turn on bottom left dot
// . turn on AM/PM/Degree dot
// s upcoming number is seconds, print as HH:MM or MM:SS
// z clear this display
// f upcoming number is floating point
// r raw segment based on bitmap of upcoming integer number (see reference document above)
//
// Some sample valid combinations:
// 787 -> 787
// x47 -> 2F
// s:241 -> 04:01
// s241 -> 4 01
// s1241 -> 20:41
// z ->
// x88 -> 58
// f8.5 -> 8.5
// f-9.34 -> -9.34
// f:-9.34 -> -9.:34
// r255 -> 8. (all 8 segments on)
switch (str[i]) {
case 'x': // print given dec value as hex
// hex = true;
outnumtype = HEXADECIMAL;
break;
case 'f': // given number is floating point number
// fp = true;
outnumtype = FLOAT;
break;
case ':': // print colon
dots |= 0x02;
break;
case '^': // print top_left_dot
dots |= 0x08;
break;
case 'v': // print bottom_left_dot
dots |= 0x04;
break;
case '.': // print ampm
dots |= 0x10;
break;
case 's': // duration in seconds
s = true;
break;
case '-':
case '0':
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
hasnumber= true;
if (outnumtype == FLOAT) {
// Floating point number is given
numberf = atof(str+i);
// Find number of fractional digits
buf= str+i;
char *cp= strchr(buf, '.');
if (cp == NULL) {
fds= 0;
} else {
fds= buf+strlen(buf) - 1 - cp;
}
} else {
// Integer is given
number = atoi(str+i);
}
done = true;
break;
case 'z': // Clear this display
hasnumber=false;
dots=0;
s=false;
sevenseg[unit]->clear();
break;
case 'r': // Raw segment
outnumtype= SEGMENTS;
break;
default: // unknown format, ignore
break;
}
}
if (hasnumber) {
if (s) {
// number is duration in seconds
int hour = number/60/60;
int minute = (number/60)%60;
if (hour) {
// HH:MM
number = hour*100 + minute;
} else {
// MM:SS
number = minute*100 + number%60;
}
}
if (outnumtype == HEXADECIMAL) {
// Hex
sevenseg[unit]->print(number, HEX);
} else if (outnumtype == FLOAT) {
// Floating point
sevenseg[unit]->printFloat(numberf, fds, 10);
} else if (outnumtype == SEGMENTS) {
// Raw segments
sevenseg[unit]->writeDigitRaw(x, number);
} else {
// Decimal
sevenseg[unit]->print(number, DEC);
}
}
if (dots) {
sevenseg[unit]->writeDigitRaw(2, dots);
}
sevenseg[unit]->writeDisplay();
}
/*********************************************************************************************/
#ifdef USE_DISPLAY_MODES1TO5
void SevensegTime(boolean time_24)
{
uint hours = RtcTime.hour;
uint minutes = RtcTime.minute;
uint second = RtcTime.second;
uint16_t displayValue = hours * 100 + minutes;
uint16_t dots = 0;
// Do 24 hour to 12 hour format conversion when required.
if (!time_24) {
// Handle when hours are past 12 by subtracting 12 hours (1200 value).
if (hours > 12) {
displayValue -= 1200;
}
// Handle hour 0 (midnight) being shown as 12.
else if (hours == 0) {
displayValue += 1200;
}
}
// Now print the time value to the display.
sevenseg[0]->print(displayValue, DEC);
// Add zero padding when in 24 hour mode and it's midnight.
// In this case the print function above won't have leading 0's
// which can look confusing. Go in and explicitly add these zeros.
if (time_24) {
if (hours == 0) {
// Pad hour 0.
sevenseg[0]->writeDigitNum(1, 0);
// Also pad when the 10's minute is 0 and should be padded.
if (minutes < 10) {
sevenseg[0]->writeDigitNum(3, 0);
}
}
if (hours < 10) {
// Always have 4 digits time
sevenseg[0]->writeDigitNum(0, 0);
}
} else {
// Identify and display AM/PM
if (hours >= 12) {
dots |= 0x10;
}
}
sevenseg[0]->writeDigitRaw(2, dots |= ((second%2) << 1));
sevenseg[0]->writeDisplay();
}
void SevensegRefresh(void) // Every second
{
if (disp_power) {
if (Settings.display_mode) { // Mode 0 is User text
switch (Settings.display_mode) {
case 1: // Time 12
SevensegTime(false);
break;
case 2: // Time 24
SevensegTime(true);
break;
case 4: // Mqtt
case 3: // Local
case 5: { // Mqtt
break;
}
}
}
}
}
#endif // USE_DISPLAY_MODES1TO5
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdsp11(uint8_t function)
{
if (!I2cEnabled(XI2C_47)) { return false; }
bool result = false;
if (FUNC_DISPLAY_INIT_DRIVER == function) {
SevensegInitDriver();
}
else if (XDSP_11 == Settings.display_model) {
switch (function) {
case FUNC_DISPLAY_MODEL:
result = true;
break;
case FUNC_DISPLAY_INIT:
SevensegInit(dsp_init);
break;
case FUNC_DISPLAY_CLEAR:
SevensegClear();
break;
#ifdef USE_DISPLAY_MODES1TO5
case FUNC_DISPLAY_EVERY_SECOND:
SevensegRefresh();
break;
#endif // USE_DISPLAY_MODES1TO5
case FUNC_DISPLAY_ONOFF:
case FUNC_DISPLAY_POWER:
SevensegOnOff();
break;
case FUNC_DISPLAY_DRAW_STRING:
SevensegDrawStringAt(dsp_x, dsp_y, dsp_str, dsp_color, dsp_flag);
break;
}
}
return result;
}
#endif // USE_DISPLAY_SEVENSEG
#endif // USE_DISPLAY
#endif // USE_I2C