| .. |
|
xdrv_01_1_webserver_mail.ino
|
add lt and gt signs is missing (#18064)
|
2023-02-27 16:33:31 +01:00 |
|
xdrv_01_2_webserver_esp32_mail.ino
|
Refactor sendmail and solve buffer overflows
|
2022-06-22 12:01:38 +02:00 |
|
xdrv_01_9_webserver.ino
|
fix #18817 http response for status with retain (#18819)
|
2023-06-09 07:59:24 +00:00 |
|
xdrv_02_1_mqtt_file.ino
|
Change command FileUpload binary index
|
2023-05-06 18:09:11 +02:00 |
|
xdrv_02_9_mqtt.ino
|
Support for IPv6 only networks on Ethernet (not yet Wifi) (#17527)
|
2022-12-27 21:59:34 +01:00 |
|
xdrv_03_energy.ino
|
Add Energy->phase_count_virtual
|
2023-06-30 11:14:37 +02:00 |
|
xdrv_03_esp32_energy.ino
|
Change loglevel message
|
2023-06-30 11:31:59 +02:00 |
|
xdrv_04_light.ino
|
update light when `VirtualCT` is invoked (#18972)
|
2023-06-27 14:23:44 +02:00 |
|
xdrv_04_light_artnet.ino
|
ArtNet DMX - Added RGBWW support for single lights (#17398)
|
2022-12-16 17:30:59 +01:00 |
|
xdrv_04_light_utils.ino
|
Worked on ESP32 dimmer with Zero cross (#18481)
|
2023-04-25 13:46:19 +02:00 |
|
xdrv_05_irremote.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_05_irremote_full.ino
|
make IRHVAC send incremental changes. (#18310)
|
2023-06-10 14:53:02 +02:00 |
|
xdrv_06_snfbridge.ino
|
Refactor some logging
|
2022-11-11 14:34:58 +01:00 |
|
xdrv_07_domoticz.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_08_serial_bridge.ino
|
Changed removed leading spaces on commands ``(S)SerialSend1 to 6``
|
2022-12-04 15:09:39 +01:00 |
|
xdrv_09_timers.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_10_rules.ino
|
fix topic comparison (#18114)
|
2023-03-05 07:52:30 +01:00 |
|
xdrv_10_scripter.ino
|
Cleanup scripter logging
|
2023-07-01 14:04:27 +02:00 |
|
xdrv_11_knx.ino
|
Change format of KNX Group address (#18928)
|
2023-06-22 21:56:55 +02:00 |
|
xdrv_12_discovery.ino
|
Shutter continuous improvement (#18701)
|
2023-05-21 12:25:11 +02:00 |
|
xdrv_12_home_assistant.ino
|
haas: sync shutter discovery and fix for more than 4 shutter (#18694)
|
2023-05-20 09:06:56 +02:00 |
|
xdrv_13_display.ino
|
Enhanced TM1650 with 7-Segment commands like TM1637 (#18109)
|
2023-03-12 09:22:40 +01:00 |
|
xdrv_14_mp3.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_15_pca9685.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_16_tuyamcu_v1.ino
|
Tuya sequence fix (#18085)
|
2023-03-03 08:42:27 +01:00 |
|
xdrv_16_tuyamcu_v2.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_17_rcswitch.ino
|
Bugfix: RfSend command to support bits>32 for decimal command format
|
2022-11-19 01:40:24 -05:00 |
|
xdrv_18_armtronix_dimmers.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_19_ps16dz_dimmer.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_20_hue.ino
|
Added ``FUNC_NETWORK_UP`` and ``FUNC_NETWORK_DOWN`` events
|
2022-11-11 11:15:05 +01:00 |
|
xdrv_21_wemo.ino
|
Include Wemo SSDP presentationURL in Unishox
|
2022-11-17 20:26:00 +01:00 |
|
xdrv_21_wemo_multi.ino
|
Include Wemo SSDP presentationURL in Unishox
|
2022-11-17 20:26:00 +01:00 |
|
xdrv_22_sonoff_ifan.ino
|
Refactor some logging
|
2022-11-11 14:34:58 +01:00 |
|
xdrv_23_zigbee_0_constants.ino
|
Zigbee basic support for Green Power
|
2022-09-19 22:28:38 +02:00 |
|
xdrv_23_zigbee_1_headers.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_23_zigbee_1z_libs.ino
|
Zigbee support for air sensors (#18665)
|
2023-05-15 22:04:13 +02:00 |
|
xdrv_23_zigbee_2_devices.ino
|
Zigbee Alexa/Hue emulation, support multiple switches on separate endpoints
|
2022-10-04 12:49:10 +02:00 |
|
xdrv_23_zigbee_2a_devices_impl.ino
|
Zigbee Alexa/Hue emulation, support multiple switches on separate endpoints
|
2022-10-04 12:49:10 +02:00 |
|
xdrv_23_zigbee_4a_nano_fs.ino
|
Zigbee friendly names per endpoint
|
2022-10-02 20:54:49 +02:00 |
|
xdrv_23_zigbee_4b_data.ino
|
Zigbee include "BatteryPercentage" in all messages
|
2022-08-06 14:27:58 +02:00 |
|
xdrv_23_zigbee_4c_devices.ino
|
Zigbee load from FS before EEPROM
|
2022-10-04 16:02:44 +02:00 |
|
xdrv_23_zigbee_5_0_constants.ino
|
Zigbee improved Aqara plug support and completed cluster 0x0702
|
2022-11-14 22:46:08 +01:00 |
|
xdrv_23_zigbee_5_1_attributes.ino
|
Zigbee support for air sensors (#18665)
|
2023-05-15 22:04:13 +02:00 |
|
xdrv_23_zigbee_5_2_converters.ino
|
Zigbee support for air sensors (#18665)
|
2023-05-15 22:04:13 +02:00 |
|
xdrv_23_zigbee_6_0_commands.ino
|
Zigbee fixed regression with SetOption101 (#18884)
|
2023-06-14 22:46:18 +02:00 |
|
xdrv_23_zigbee_6_1_greenpower.ino
|
Zigbee basic support for Green Power
|
2022-09-19 22:28:38 +02:00 |
|
xdrv_23_zigbee_6_5_hue.ino
|
Zigbee Alexa/Hue emulation, support multiple switches on separate endpoints
|
2022-10-04 12:49:10 +02:00 |
|
xdrv_23_zigbee_7_0_statemachine.ino
|
Fix startup if F2 is not present
|
2022-09-24 11:58:58 +02:00 |
|
xdrv_23_zigbee_7_5_map.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_23_zigbee_7_6_flash_fs.ino
|
Tasmota Core 208 (#18460)
|
2023-04-20 20:01:35 +02:00 |
|
xdrv_23_zigbee_7_7_plugin.ino
|
Zigbee support for air sensors (#18665)
|
2023-05-15 22:04:13 +02:00 |
|
xdrv_23_zigbee_7_8_default_plugin.ino
|
Zigbee add default plugin in flash
|
2022-11-18 00:21:01 +01:00 |
|
xdrv_23_zigbee_8_parsers.ino
|
Zigbee send Tuya 'magic spell' to unlock devices when pairing (#18144)
|
2023-03-09 21:34:32 +01:00 |
|
xdrv_23_zigbee_9_serial.ino
|
Zigbee prepare for Green Power support
|
2022-09-01 08:14:37 +02:00 |
|
xdrv_23_zigbee_9a_upload.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_23_zigbee_A_impl.ino
|
Zigbee support for air sensors (#18665)
|
2023-05-15 22:04:13 +02:00 |
|
xdrv_24_buzzer.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_25_A4988_Stepper.ino
|
Change strtod() into CharToFloat() saving 8k code
|
2023-01-06 15:28:44 +01:00 |
|
xdrv_26_ariluxrf.ino
|
Keep webserver enabled on command ``upload``
|
2023-01-07 15:37:52 +01:00 |
|
xdrv_27_esp32_shutter.ino
|
Repair SHUTTER Shelly 2.5 with manual relay change on switches (#18877)
|
2023-06-14 16:14:10 +02:00 |
|
xdrv_27_shutter.ino
|
Repair SHUTTER Shelly 2.5 with manual relay change on switches (#18877)
|
2023-06-14 16:14:10 +02:00 |
|
xdrv_28_pcf8574_v2.ino
|
Fix PCF8574 mode2 init using scripts
|
2023-06-30 11:37:20 +02:00 |
|
xdrv_29_deepsleep.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_30_exs_dimmer.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_31_tasmota_client.ino
|
Increase TasmotaClient receive buffer
|
2023-04-16 14:39:29 +02:00 |
|
xdrv_32_hotplug.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_33_nrf24l01.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_34_wemos_motor_v1.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_35_pwm_dimmer.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_36_keeloq.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_37_sonoff_d1.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_38_ping.ino
|
Support for IPv6 DNS records (AAAA) and IPv6 ``Ping`` for ESP32 and ESP8266 (#17417)
|
2022-12-17 10:08:35 +01:00 |
|
xdrv_39_thermostat.ino
|
add HybridControllerPhase to json payload (#18842)
|
2023-06-26 21:56:07 +02:00 |
|
xdrv_40_telegram.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_41_tcp_bridge.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_42_0_i2s_audio.ino
|
better way to support LSBJ (#18827)
|
2023-06-08 20:39:02 +02:00 |
|
xdrv_42_1_i2s_mp3mic.ino
|
Add support for INMP441 MEMS microphone (#18823)
|
2023-06-08 16:24:44 +02:00 |
|
xdrv_42_2_i2s_mp3stream.ino
|
update i2s audio
|
2022-08-08 14:00:55 +02:00 |
|
xdrv_42_3_i2s_saytime.ino
|
Create xdrv_42_3_i2s_saytime.ino
|
2022-07-26 15:32:35 +02:00 |
|
xdrv_42_4_i2s_codecs.ino
|
i2s bridge
|
2022-08-15 13:54:03 +02:00 |
|
xdrv_42_5_i2s_bridge.ino
|
i2s bridge
|
2022-08-15 13:54:03 +02:00 |
|
xdrv_42_6_i2s_rtttl.ino
|
Added I2SRtttl command (#18423)
|
2023-04-16 12:04:22 +02:00 |
|
xdrv_43_mlx90640.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_44_miel_hvac.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_45_shelly_dimmer.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_46_ccloader.ino
|
Refactor some logging
|
2022-11-11 14:34:58 +01:00 |
|
xdrv_47_ftc532.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_48_timeprop.ino
|
Fix PID-Control parameter destruction
|
2023-01-06 14:58:19 +01:00 |
|
xdrv_49_pid.ino
|
Change PID temperature update (#17636)
|
2023-01-07 16:11:30 +01:00 |
|
xdrv_50_filesystem.ino
|
Move SD card init up
|
2023-07-01 12:48:33 +02:00 |
|
xdrv_51_bs814a2.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_52_0_berry_struct.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_1_berry_native.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_3_berry_MI32.ino
|
Berry: add BLE server/advertiser (#18494)
|
2023-04-26 08:39:29 +02:00 |
|
xdrv_52_3_berry_audio.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_3_berry_crypto.ino
|
Berry replace `string.format`with `format` (#18945)
|
2023-06-23 18:33:31 +02:00 |
|
xdrv_52_3_berry_display.ino
|
disable SHT pig on i2c / add missing GT911 defines (#18595)
|
2023-05-07 15:32:15 +02:00 |
|
xdrv_52_3_berry_energy.ino
|
add Energy.phase_count_virtual to berry energy module (#19004)
|
2023-06-30 22:19:59 +02:00 |
|
xdrv_52_3_berry_flash.ino
|
Fix ESP32 safeboot propagating upload
|
2023-01-13 11:30:30 +01:00 |
|
xdrv_52_3_berry_gpio.ino
|
Berry virtual member can return nil
|
2022-06-15 22:00:31 +02:00 |
|
xdrv_52_3_berry_hue.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_3_berry_leds.ino
|
Add TODO
|
2023-05-26 17:51:20 +02:00 |
|
xdrv_52_3_berry_light.ino
|
Berry fix `light.set()` (#18268)
|
2023-03-26 15:59:18 +02:00 |
|
xdrv_52_3_berry_light_state.ino
|
Cleaning unused variables
|
2022-06-03 22:57:05 +02:00 |
|
xdrv_52_3_berry_lvgl.ino
|
LVGL Fix BMP format for `lv.screenshot()`
|
2022-10-08 09:44:32 +02:00 |
|
xdrv_52_3_berry_matter.ino
|
Matter Border Router for ESP8266 (experimental) (#18734)
|
2023-05-29 10:40:24 +02:00 |
|
xdrv_52_3_berry_mqtt.ino
|
Berry has persistent MQTT subscriptions: auto-subscribe at (re)connection
|
2022-09-10 19:08:26 +02:00 |
|
xdrv_52_3_berry_onewire.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_3_berry_serial.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
|
xdrv_52_3_berry_tasmota.ino
|
Matter POC for remote Relay (#18575)
|
2023-05-03 23:03:01 +02:00 |
|
xdrv_52_3_berry_tasmota_global.ino
|
Simplify Berry Mute option
|
2023-05-19 16:30:48 +02:00 |
|
xdrv_52_3_berry_tcpclientasync.ino
|
Berry add `tcpclientasync` class for non-blocking TCP client (#18584)
|
2023-05-05 15:13:22 +02:00 |
|
xdrv_52_3_berry_tcpserver.ino
|
Report error of socket failed to open
|
2022-07-07 19:56:08 +02:00 |
|
xdrv_52_3_berry_tf_lite_micro.ino
|
TFL: bugfix uninitialized pointer, some cleanups (#18161)
|
2023-03-11 10:55:57 +01:00 |
|
xdrv_52_3_berry_ulp.ino
|
support RISCV ULP for ESP32S2 and ESP32S3
|
2022-10-30 18:40:32 +01:00 |
|
xdrv_52_3_berry_webclient.ino
|
Berry Webclient: Change StreamBytes to StreamBeBytesWriter, and improve wc_getbytes (#18837)
|
2023-06-10 11:28:31 +02:00 |
|
xdrv_52_3_berry_webserver.ino
|
Berry `webserver.html_escape()` reusing the internal HTML escaping function (#18381)
|
2023-04-10 19:16:01 +02:00 |
|
xdrv_52_3_berry_wire.ino
|
Fix parameter for `wire.endtransmission()` (#18131)
|
2023-03-07 19:01:42 +01:00 |
|
xdrv_52_3_berry_zigbee.ino
|
Zigbee Berry mapping fix attributes (#18747)
|
2023-05-29 23:05:45 +02:00 |
|
xdrv_52_7_berry_embedded.ino
|
ESP32 preliminary support for Matter protocol, milestone 1 (commissioning) (#17871)
|
2023-02-04 00:00:21 +01:00 |
|
xdrv_52_9_berry.ino
|
Initial support for WS2812 scheme 14
|
2023-05-26 17:47:57 +02:00 |
|
xdrv_53_projector_ctrl.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_54_lvgl.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_55_touch.ino
|
add xpt2046 option for spi bus 2 (#18480)
|
2023-04-23 10:19:31 +02:00 |
|
xdrv_56_rtc_chips.ino
|
Fix init order of device drivers (#18124)
|
2023-03-11 15:52:02 +01:00 |
|
xdrv_57_1_tasmesh_support.ino
|
Consolidate AddLogBuffer
|
2022-11-11 11:47:11 +01:00 |
|
xdrv_57_9_tasmesh.ino
|
Refactor some logging
|
2022-11-11 14:34:58 +01:00 |
|
xdrv_58_range_extender.ino
|
don't touch AP_STA mode only if Rgx is up
|
2022-11-20 16:28:59 +01:00 |
|
xdrv_59_influxdb.ino
|
Fix ESP32 InfluxDb initial connection delays
|
2023-05-21 16:21:43 +02:00 |
|
xdrv_60_shift595.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_61_ds3502.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_62_improv.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_63_modbus_bridge.ino
|
Added Endianess Parameter (#18650)
|
2023-05-14 14:18:45 +02:00 |
|
xdrv_64_pca9632.ino
|
Update changelogs
|
2023-01-01 14:29:41 +01:00 |
|
xdrv_65_tuyamcubr.ino
|
reset recv parser if it takes too long for the message to arrive. (#17845)
|
2023-02-01 11:48:07 +01:00 |
|
xdrv_66_tm1638.ino
|
Fix init order of device drivers (#18124)
|
2023-03-11 15:52:02 +01:00 |
|
xdrv_67_mcp23xxx.ino
|
Simplify base modes
|
2023-03-26 11:39:30 +02:00 |
|
xdrv_68_zerocrossDimmer.ino
|
Update xdrv_68_zerocrossDimmer.ino (#18556)
|
2023-05-02 15:53:17 +02:00 |
|
xdrv_69_pca9557.ino
|
Add support for PCA9557
|
2023-05-14 15:08:09 +02:00 |
|
xdrv_79_esp32_ble.ino
|
Update xdrv_79_esp32_ble.ino (#17990)
|
2023-02-20 10:51:44 +01:00 |
|
xdrv_81_esp32_webcam.ino
|
Add mutex to many camera functions. (#18655)
|
2023-05-16 12:21:25 +02:00 |
|
xdrv_82_esp32_ethernet.ino
|
revert PR Olimex fix (#17841)
|
2023-01-31 14:46:09 +01:00 |
|
xdrv_83_esp32_watch.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_85_esp32_ble_eq3_trv.ino
|
Support ESPC3 and ESPS3 (#17791)
|
2023-01-26 09:58:59 +01:00 |
|
xdrv_86_esp32_sonoff_spm.ino
|
Consolidate energy messages
|
2023-03-18 18:26:43 +01:00 |
|
xdrv_87_esp32_sonoff_tm1621.ino
|
Support for reset settings on filesystem
|
2023-03-13 15:41:21 +01:00 |
|
xdrv_88_esp32_shelly_pro.ino
|
Add support for multiple MCP23008 as switch/button/relay
|
2023-03-03 10:44:35 +01:00 |
|
xdrv_88_esp32_shelly_pro_v1.ino
|
Add DevicesPresent limit check
|
2023-02-25 16:44:04 +01:00 |
|
xdrv_88_esp32_shelly_pro_v2.ino
|
Fix init order of device drivers (#18124)
|
2023-03-11 15:52:02 +01:00 |
|
xdrv_89_esp32_dali.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
|
xdrv_90_esp32_dingtian_relay.ino
|
Added support for Dingtian Relay Board v3.6.10 (#18535)
|
2023-05-01 14:51:02 +02:00 |
|
xdrv_122_file_settings_demo.ino
|
Change loglevel message
|
2023-06-30 11:31:59 +02:00 |
|
xdrv_127_debug.ino
|
Bump v12.4.0.3
|
2023-03-17 21:05:51 +01:00 |
6dd8aabeef