mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xsns_62_MI_HM10.ino

1296 lines
53 KiB
C++
Raw Blame History

/*
xsns_62_MI_HM10.ino - MI-BLE-sensors via HM-10 support for Tasmota
Copyright (C) 2020 Christian Baars and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------------------
Version yyyymmdd Action Description
--------------------------------------------------------------------------------------------
0.9.3.1 20200412 added - clean ups, code shrink, battery bugfix
---
0.9.3.0 20200322 added - multi page web view, command HM10PAGE, polling for MJ_HT_V1,
more stable readings, internal refactoring
---
0.9.2.0 20200317 added - MiBeacon-support, add Flora, MJ_HT_V1 and CGD1, add dew point,
add AUTO(-scan), RULES-message
---
0.9.1.0 20200209 added - LYWSD02-support, including setting the time
---
0.9.0.0 20200130 started - initial development by Christian Baars (support LYWSD03 only)
forked - from arendst/tasmota - https://github.com/arendst/Tasmota
*/
#ifdef ESP8266 // ESP8266 only. Use define USE_MI_ESP32 for ESP32 support
#ifdef USE_HM10
#define XSNS_62 62
#include <TasmotaSerial.h>
#include <vector>
TasmotaSerial *HM10Serial;
#define HM10_BAUDRATE 115200 // default with FW>700 is 115200
#define HM10_MAX_TASK_NUMBER 12
uint8_t HM10_TASK_LIST[HM10_MAX_TASK_NUMBER+1][2]; // first value: kind of task - second value: delay in x * 100ms
#define HM10_MAX_RX_BUF 64
struct {
uint8_t current_task_delay; // number of 100ms-cycles
uint8_t last_command;
uint16_t perPage = 4;
uint16_t firmware;
uint32_t period; // set manually in addition to TELE-period, is set to TELE-period after start
uint32_t serialSpeed;
union {
uint32_t time;
uint8_t timebuf[4];
};
uint16_t autoScanInterval;
struct {
uint32_t awaiting:8;
uint32_t init:1;
uint32_t pending_task:1;
uint32_t connected:1;
uint32_t subscribed:1;
uint32_t autoScan:1;
// TODO: more to come
} mode;
struct {
uint8_t sensor; // points to to the number 0...255
// TODO: more to come
} state;
} HM10;
#pragma pack(1) // byte-aligned structures to read the sensor data
struct {
uint16_t temp;
uint8_t hum;
} LYWSD0x_HT;
struct {
uint8_t spare;
uint16_t temp;
uint16_t hum;
} CGD1_HT;
struct {
uint16_t temp;
uint8_t spare;
uint32_t lux;
uint8_t moist;
uint16_t fert;
} Flora_TLMF; // temperature, lux, moisture, fertility
struct mi_beacon_t{
uint16_t frame;
uint16_t productID;
uint8_t counter;
uint8_t Mac[6];
uint8_t spare;
uint8_t type;
uint8_t ten;
uint8_t size;
union {
struct{ //0d
uint16_t temp;
uint16_t hum;
}HT;
uint8_t bat; //0a
uint16_t temp; //04
uint16_t hum; //06
uint32_t lux; //07
uint8_t moist; //08
uint16_t fert; //09
};
};
#pragma pack(0)
struct mi_sensor_t{
uint8_t type; //Flora = 1; MI-HT_V1=2; LYWSD02=3; LYWSD03=4; CGG1=5; CGD1=6
uint8_t serial[6];
uint8_t showedUp;
float temp; //Flora, MJ_HT_V1, LYWSD0x, CGx
union {
struct {
float moisture;
float fertility;
uint32_t lux;
}; // Flora
struct {
float hum;
}; // MJ_HT_V1, LYWSD0x
};
uint8_t bat; // all sensors
};
std::vector<mi_sensor_t> MIBLEsensors;
/*********************************************************************************************\
* constants
\*********************************************************************************************/
#define D_CMND_HM10 "HM10"
const char S_JSON_HM10_COMMAND_NVALUE[] PROGMEM = "{\"" D_CMND_HM10 "%s\":%d}";
const char S_JSON_HM10_COMMAND[] PROGMEM = "{\"" D_CMND_HM10 "%s%s\"}";
const char kHM10_Commands[] PROGMEM = "Scan|AT|Period|Baud|Time|Auto|Page";
#define FLORA 1
#define MJ_HT_V1 2
#define LYWSD02 3
#define LYWSD03MMC 4
#define CGG1 5
#define CGD1 6
const uint16_t kHM10SlaveID[6]={ 0x0098, // Flora
0x01aa, // MJ_HT_V1
0x045b, // LYWSD02
0x055b, // LYWSD03
0x0347, // CGG1
0x0576 // CGD1
};
const char kHM10SlaveType1[] PROGMEM = "Flora";
const char kHM10SlaveType2[] PROGMEM = "MJ_HT_V1";
const char kHM10SlaveType3[] PROGMEM = "LYWSD02";
const char kHM10SlaveType4[] PROGMEM = "LYWSD03";
const char kHM10SlaveType5[] PROGMEM = "CGG1";
const char kHM10SlaveType6[] PROGMEM = "CGD1";
const char * kHM10SlaveType[] PROGMEM = {kHM10SlaveType1,kHM10SlaveType2,kHM10SlaveType3,kHM10SlaveType4,kHM10SlaveType5,kHM10SlaveType6};
/*********************************************************************************************\
* enumerations
\*********************************************************************************************/
enum HM10_Commands { // commands useable in console or rules
CMND_HM10_DISC_SCAN, // re-scan for sensors
CMND_HM10_AT, // send AT-command for debugging and special configuration
CMND_HM10_PERIOD, // set period like TELE-period in seconds between read-cycles
CMND_HM10_BAUD, // serial speed of ESP8266 (<-> HM10), does not change baud rate of HM10
CMND_HM10_TIME, // set LYWSD02-Time from ESP8266-time
CMND_HM10_AUTO, // do discovery scans permanently to receive MiBeacons in seconds between read-cycles
CMND_HM10_PAGE // sensor entries per web page, which will be shown alternated
};
enum HM10_awaitData: uint8_t {
none = 0,
tempHumLY = 1,
TLMF = 2,
bat = 3,
tempHumCGD1 = 4,
discScan = 5,
tempHumMJ = 6
};
/*********************************************************************************************\
* Task codes defines
\*********************************************************************************************/
#define TASK_HM10_NOTASK 0 // nothing to be done
#define TASK_HM10_ROLE1 1 // change role to 1
#define TASK_HM10_IMME1 2 // change imme to 1
#define TASK_HM10_RENEW 3 // device factory setting
#define TASK_HM10_RESET 4 // device reset
#define TASK_HM10_DISC 5 // device discovery scan: AT+DISA?
#define TASK_HM10_CONN 6 // connect to given MAC
#define TASK_HM10_VERSION 7 // query FW version
#define TASK_HM10_NAME 8 // query device name
#define TASK_HM10_FEEDBACK 9 // get device response
#define TASK_HM10_DISCONN 10 // disconnect
#define TASK_HM10_SUB_L3 11 // subscribe to service handle 37
#define TASK_HM10_SCAN9 13 // longest discovery scan possible
#define TASK_HM10_UN_L3 14 // unsubscribe service handle 37
#define TASK_HM10_READ_BT_L3 16 // read from handle 3A -> Battery
#define TASK_HM10_SUB_L2 17 // subscribe to service handle 3C
#define TASK_HM10_UN_L2 18 // unsubscribe service handle 3C
#define TASK_HM10_READ_BT_L2 19 // read from handle 43 -> Battery
#define TASK_HM10_TIME_L2 20 // set time of LYWSD02 to system time
#define TASK_HM10_SHOW0 21 // set verbositiy to minimum
#define TASK_HM10_READ_BF_FL 22 // read battery and firmware from flower care
#define TASK_HM10_CALL_TLMF_FL 23 // write 0xa01f to handle 0x33 to init sensor readings
#define TASK_HM10_READ_TLMF_FL 24 // read temp,lux,moist and fert from flower care
#define TASK_HM10_SUB_HT_CGD1 25 // subscribe to service handle 4b
#define TASK_HM10_UN_HT_CGD1 26 // unsubscribe service handle 4b
#define TASK_HM10_READ_B_CGD1 27 // read service handle 11
#define TASK_HM10_READ_B_MJ 29 // read service handle 18
#define TASK_HM10_SUB_HT_MJ 30 // subscribe to service handle 0f
#define TASK_HM10_STATUS_EVENT 32 // process status for RULES
#define TASK_HM10_DONE 99 // used, if there was a task in the slot or just to wait
/*********************************************************************************************\
* Helper functions
\*********************************************************************************************/
void HM10_Launchtask(uint8_t task, uint8_t slot, uint8_t delay){
HM10_TASK_LIST[slot][0] = task;
HM10_TASK_LIST[slot][1] = delay;
HM10_TASK_LIST[slot+1][0] = TASK_HM10_NOTASK; // the tasks must always be launched in ascending order!!
HM10.current_task_delay = HM10_TASK_LIST[0][1];
}
void HM10_TaskReplaceInSlot(uint8_t task, uint8_t slot){
HM10.last_command = HM10_TASK_LIST[slot][0]; // save command
HM10_TASK_LIST[slot][0] = task;
}
void HM10_ReverseMAC(uint8_t _mac[]){
uint8_t _reversedMAC[6];
for (uint8_t i=0; i<6; i++){
_reversedMAC[5-i] = _mac[i];
}
memcpy(_mac,_reversedMAC, sizeof(_reversedMAC));
}
/*********************************************************************************************\
* chained tasks
\*********************************************************************************************/
void HM10_Reset(void) { HM10_Launchtask(TASK_HM10_DISCONN,0,1); // disconnect
HM10_Launchtask(TASK_HM10_ROLE1,1,1); // set role to 1
HM10_Launchtask(TASK_HM10_IMME1,2,1); // set imme to 1
HM10_Launchtask(TASK_HM10_RESET,3,1); // reset Device
HM10_Launchtask(TASK_HM10_VERSION,4,10); // read SW Version
HM10_Launchtask(TASK_HM10_SCAN9,5,2); // scan time 9 seconds
HM10_Launchtask(TASK_HM10_DISC,6,2); // discovery
HM10_Launchtask(TASK_HM10_STATUS_EVENT,7,2); // status
}
void HM10_Discovery_Scan(void) {
HM10_Launchtask(TASK_HM10_DISCONN,0,1); // disconnect
HM10_Launchtask(TASK_HM10_DISC,1,5); // discovery
HM10_Launchtask(TASK_HM10_STATUS_EVENT,2,2); // status
}
void HM10_Read_LYWSD03(void) {
HM10_Launchtask(TASK_HM10_CONN,0,1); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,1,35); // get OK+CONN
HM10_Launchtask(TASK_HM10_SUB_L3,2,20); // subscribe
HM10_Launchtask(TASK_HM10_UN_L3,3,80); // unsubscribe
HM10_Launchtask(TASK_HM10_READ_BT_L3,4,5); // read Battery
HM10_Launchtask(TASK_HM10_DISCONN,5,5); // disconnect
}
void HM10_Read_LYWSD02(void) {
HM10_Launchtask(TASK_HM10_CONN,0,1); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,1,35); // get OK+CONN
HM10_Launchtask(TASK_HM10_SUB_L2,2,20); // subscribe
HM10_Launchtask(TASK_HM10_UN_L2,3,80); // unsubscribe
HM10_Launchtask(TASK_HM10_READ_BT_L2,4,5); // read Battery
HM10_Launchtask(TASK_HM10_DISCONN,5,5); // disconnect
}
void HM10_Time_LYWSD02(void) {
HM10_Launchtask(TASK_HM10_DISCONN,0,0); // disconnect
HM10_Launchtask(TASK_HM10_CONN,1,5); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,2,35); // get OK+CONN
HM10_Launchtask(TASK_HM10_TIME_L2,3,20); // subscribe
HM10_Launchtask(TASK_HM10_DISCONN,4,5); // disconnect
}
void HM10_Read_Flora(void) {
HM10_Launchtask(TASK_HM10_DISCONN,0,0); // disconnect
HM10_Launchtask(TASK_HM10_CONN,1,1); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,2,5); // get OK+CONN
HM10_Launchtask(TASK_HM10_READ_BF_FL,3,20); // read battery
HM10_Launchtask(TASK_HM10_CALL_TLMF_FL,4,30); // read TLMF
HM10_Launchtask(TASK_HM10_DISCONN,5,10); // disconnect
}
void HM10_Read_CGD1(void) {
HM10_Launchtask(TASK_HM10_CONN,0,1); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,1,35); // get OK+CONN
HM10_Launchtask(TASK_HM10_SUB_HT_CGD1,2,20); // subscribe
HM10_Launchtask(TASK_HM10_UN_HT_CGD1,3,10); // unsubscribe
HM10_Launchtask(TASK_HM10_READ_B_CGD1,4,5); // read Battery
HM10_Launchtask(TASK_HM10_DISCONN,5,5); // disconnect
}
void HM10_Read_MJ_HT_V1(void) {
HM10_Launchtask(TASK_HM10_CONN,0,1); // connect
HM10_Launchtask(TASK_HM10_FEEDBACK,1,35); // get OK+CONN
HM10_Launchtask(TASK_HM10_READ_B_MJ,2,20); // battery
HM10_Launchtask(TASK_HM10_SUB_HT_MJ,3,10); // temp hum
HM10_Launchtask(TASK_HM10_DISCONN,4,5); // disconnect
}
/**
* @brief Return the slot number of a known sensor or return create new sensor slot
*
* @param _serial BLE address of the sensor
* @param _type Type number of the sensor
* @return uint32_t Known or new slot in the sensors-vector
*/
uint32_t MIBLEgetSensorSlot(uint8_t (&_serial)[6], uint16_t _type){
DEBUG_SENSOR_LOG(PSTR("%s: will test ID-type: %x"),D_CMND_HM10, _type);
bool _success = false;
for (uint32_t i=0;i<6;i++){ // i < sizeof(kHM10SlaveID) gives compiler warning
if(_type == kHM10SlaveID[i]){
DEBUG_SENSOR_LOG(PSTR("HM10: ID is type %u"), i);
_type = i+1;
_success = true;
}
else {
DEBUG_SENSOR_LOG(PSTR("%s: ID-type is not: %x"),D_CMND_HM10,kHM10SlaveID[i]);
}
}
if(!_success) return 0xff;
DEBUG_SENSOR_LOG(PSTR("%s: vector size %u"),D_CMND_HM10, MIBLEsensors.size());
for(uint32_t i=0; i<MIBLEsensors.size(); i++){
if(memcmp(_serial,MIBLEsensors[i].serial,sizeof(_serial))==0){
DEBUG_SENSOR_LOG(PSTR("%s: known sensor at slot: %u"),D_CMND_HM10, i);
if(MIBLEsensors[i].showedUp < 4){ // if we got an intact packet, the sensor should show up several times
MIBLEsensors[i].showedUp++; // count up to the above number ... now we are pretty sure
}
return i;
}
DEBUG_SENSOR_LOG(PSTR("%s: i: %x %x %x %x %x %x"),D_CMND_HM10, MIBLEsensors[i].serial[5], MIBLEsensors[i].serial[4],MIBLEsensors[i].serial[3],MIBLEsensors[i].serial[2],MIBLEsensors[i].serial[1],MIBLEsensors[i].serial[0]);
DEBUG_SENSOR_LOG(PSTR("%s: n: %x %x %x %x %x %x"),D_CMND_HM10, _serial[5], _serial[4], _serial[3],_serial[2],_serial[1],_serial[0]);
}
DEBUG_SENSOR_LOG(PSTR("%s: found new sensor"),D_CMND_HM10);
mi_sensor_t _newSensor;
memcpy(_newSensor.serial,_serial, sizeof(_serial));
_newSensor.type = _type;
_newSensor.showedUp = 1;
_newSensor.temp =NAN;
_newSensor.bat=0x00;
switch (_type)
{
case 1:
_newSensor.moisture =NAN;
_newSensor.fertility =NAN;
_newSensor.lux = 0x00ffffff;
break;
case 2: case 3: case 4: case 5: case 6:
_newSensor.hum=NAN;
break;
default:
break;
}
MIBLEsensors.push_back(_newSensor);
AddLog_P2(LOG_LEVEL_DEBUG,PSTR("%s: new %s at slot: %u"),D_CMND_HM10, kHM10SlaveType[_type-1],MIBLEsensors.size()-1);
return MIBLEsensors.size()-1;
};
/*********************************************************************************************\
* init serial
* define serial rx/tx port fixed with 115200 baud
\*********************************************************************************************/
void HM10SerialInit(void) {
HM10.mode.init = false;
HM10.serialSpeed = HM10_BAUDRATE;
HM10Serial = new TasmotaSerial(Pin(GPIO_HM10_RX), Pin(GPIO_HM10_TX), 1, 0, HM10_MAX_RX_BUF);
if (HM10Serial->begin(HM10.serialSpeed)) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s start serial communication fixed to 115200 baud"),D_CMND_HM10);
if (HM10Serial->hardwareSerial()) {
ClaimSerial();
DEBUG_SENSOR_LOG(PSTR("%s: claim HW"),D_CMND_HM10);
}
HM10_Reset();
HM10.mode.pending_task = 1;
HM10.mode.init = 1;
HM10.period = Settings.tele_period;
DEBUG_SENSOR_LOG(PSTR("%s_TASK_LIST initialized, now return to main loop"),D_CMND_HM10);
}
return;
}
/*********************************************************************************************\
* parse the response
\*********************************************************************************************/
void HM10parseMiBeacon(char * _buf, uint32_t _slot){
float _tempFloat;
mi_beacon_t _beacon;
if (MIBLEsensors[_slot].type==MJ_HT_V1 || MIBLEsensors[_slot].type==CGG1){
memcpy((uint8_t*)&_beacon+1,(uint8_t*)_buf, sizeof(_beacon)-1); // shift by one byte for the MJ_HT_V1
memcpy((uint8_t*)&_beacon.Mac,(uint8_t*)&_beacon.Mac+1,6); // but shift back the MAC
}
else{
memcpy((void*)&_beacon,(void*)_buf, sizeof(_beacon));
}
HM10_ReverseMAC(_beacon.Mac);
if(memcmp(_beacon.Mac,MIBLEsensors[_slot].serial,sizeof(_beacon.Mac))!=0){
if (MIBLEsensors[_slot].showedUp>3) return; // probably false alarm from a damaged packet
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: remove garbage sensor"),D_CMND_HM10);
DEBUG_SENSOR_LOG(PSTR("%s i: %x %x %x %x %x %x"),D_CMND_HM10, MIBLEsensors[_slot].serial[5], MIBLEsensors[_slot].serial[4],MIBLEsensors[_slot].serial[3],MIBLEsensors[_slot].serial[2],MIBLEsensors[_slot].serial[1],MIBLEsensors[_slot].serial[0]);
DEBUG_SENSOR_LOG(PSTR("%s n: %x %x %x %x %x %x"),D_CMND_HM10, _beacon.Mac[5], _beacon.Mac[4], _beacon.Mac[3],_beacon.Mac[2],_beacon.Mac[1],_beacon.Mac[0]);
MIBLEsensors.erase(MIBLEsensors.begin()+_slot);
return;
}
if (MIBLEsensors[_slot].showedUp<4) MIBLEsensors[_slot].showedUp++;
DEBUG_SENSOR_LOG(PSTR("MiBeacon type:%02x: %02x %02x %02x %02x %02x %02x %02x %02x"),_beacon.type, (uint8_t)_buf[0],(uint8_t)_buf[1],(uint8_t)_buf[2],(uint8_t)_buf[3],(uint8_t)_buf[4],(uint8_t)_buf[5],(uint8_t)_buf[6],(uint8_t)_buf[7]);
DEBUG_SENSOR_LOG(PSTR(" type:%02x: %02x %02x %02x %02x %02x %02x %02x %02x"),_beacon.type, (uint8_t)_buf[8],(uint8_t)_buf[9],(uint8_t)_buf[10],(uint8_t)_buf[11],(uint8_t)_buf[12],(uint8_t)_buf[13],(uint8_t)_buf[14],(uint8_t)_buf[15]);
if(MIBLEsensors[_slot].type==4 || MIBLEsensors[_slot].type==6){
DEBUG_SENSOR_LOG(PSTR("LYWSD03 and CGD1 no support for MiBeacon, type %u"),MIBLEsensors[_slot].type);
return;
}
DEBUG_SENSOR_LOG(PSTR("%s at slot %u"), kHM10SlaveType[MIBLEsensors[_slot].type-1],_slot);
switch(_beacon.type){
case 0x04:
_tempFloat=(float)(_beacon.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode 4: temp updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode 4: U16: %u Temp"), _beacon.temp );
break;
case 0x06:
_tempFloat=(float)(_beacon.hum)/10.0f;
if(_tempFloat<101){
MIBLEsensors[_slot].hum=_tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode 6: hum updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode 6: U16: %u Hum"), _beacon.hum);
break;
case 0x07:
MIBLEsensors[_slot].lux=_beacon.lux & 0x00ffffff;
DEBUG_SENSOR_LOG(PSTR("Mode 7: U24: %u Lux"), _beacon.lux & 0x00ffffff);
break;
case 0x08:
_tempFloat =(float)_beacon.moist;
if(_tempFloat<100){
MIBLEsensors[_slot].moisture=_tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode 8: moisture updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode 8: U8: %u Moisture"), _beacon.moist);
break;
case 0x09:
_tempFloat=(float)(_beacon.fert);
if(_tempFloat<65535){ // ???
MIBLEsensors[_slot].fertility=_tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode 9: fertility updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode 9: U16: %u Fertility"), _beacon.fert);
break;
case 0x0a:
if(_beacon.bat<101){
MIBLEsensors[_slot].bat = _beacon.bat;
DEBUG_SENSOR_LOG(PSTR("Mode a: bat updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode a: U8: %u %%"), _beacon.bat);
break;
case 0x0d:
_tempFloat=(float)(_beacon.HT.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode d: temp updated"));
}
_tempFloat=(float)(_beacon.HT.hum)/10.0f;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("Mode d: hum updated"));
}
DEBUG_SENSOR_LOG(PSTR("Mode d: U16: %x Temp U16: %x Hum"), _beacon.HT.temp, _beacon.HT.hum);
break;
}
}
void HM10ParseResponse(char *buf, uint16_t bufsize) {
if (!strncmp(buf,"OK",2)) {
DEBUG_SENSOR_LOG(PSTR("%s: got OK"),D_CMND_HM10);
}
if (!strncmp(buf,"HMSoft",6)) { //8
const char* _fw = "000";
memcpy((void *)_fw,(void *)(buf+8),3);
HM10.firmware = atoi(_fw);
DEBUG_SENSOR_LOG(PSTR("%s: Firmware: %d"),D_CMND_HM10, HM10.firmware);
return;
}
char * _pos = strstr(buf, "ISA:");
if(_pos) {
uint8_t _newMacArray[6] = {0};
memcpy((void *)_newMacArray,(void *)(_pos+4),6);
HM10_ReverseMAC(_newMacArray);
DEBUG_SENSOR_LOG(PSTR("%s: MAC-array: %02x%02x%02x%02x%02x%02x"),D_CMND_HM10,_newMacArray[0],_newMacArray[1],_newMacArray[2],_newMacArray[3],_newMacArray[4],_newMacArray[5]);
uint16_t _type=0xffff;
for (uint32_t idx =10;idx<bufsize;idx++){
if((uint8_t)buf[idx] == 0xfe){
if((uint8_t)buf[idx-2] == 0x16 && (uint8_t)buf[idx-1] == 0x95){
_type = _pos[idx]*256 + _pos[idx-1];
DEBUG_SENSOR_LOG(PSTR("%s: type %04x _ %02x %02x"),D_CMND_HM10,_type, _pos[idx-1],_pos[idx]);
_pos = _pos+idx-3;
break;
}
}
}
uint16_t _slot = MIBLEgetSensorSlot(_newMacArray, _type);
if(_slot!=0xff) HM10parseMiBeacon(_pos,_slot);
}
else if (strstr(buf, "LOST")){
HM10.mode.connected = false;
}
else if (strstr(buf, "CONN")){
HM10.current_task_delay = 0;
}
else {
DEBUG_SENSOR_LOG(PSTR("%s: empty response"),D_CMND_HM10);
}
}
void HM10readHT_LY(char *_buf){
DEBUG_SENSOR_LOG(PSTR("%s: raw data: %x%x%x%x%x%x%x"),D_CMND_HM10,_buf[0],_buf[1],_buf[2],_buf[3],_buf[4],_buf[5],_buf[6]);
if(_buf[0]==0x4f && _buf[1]==0x4b) return; // "OK"
if(_buf[0] != 0 && _buf[1] != 0){
memcpy(&LYWSD0x_HT,(void *)_buf,3);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: T * 100: %u, H: %u"),D_CMND_HM10,LYWSD0x_HT.temp,LYWSD0x_HT.hum);
uint32_t _slot = HM10.state.sensor;
DEBUG_SENSOR_LOG(PSTR("MIBLE: Sensor slot: %u"), _slot);
static float _tempFloat;
_tempFloat=(float)(LYWSD0x_HT.temp)/100.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
HM10.mode.awaiting = none;
HM10.current_task_delay = 0;
MIBLEsensors[_slot].showedUp=255; // this sensor is real
}
_tempFloat=(float)LYWSD0x_HT.hum;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("LYWSD0x: hum updated"));
}
}
}
void HM10readHT_CGD1(char *_buf){
DEBUG_SENSOR_LOG(PSTR("%s: raw data: %x%x%x%x%x%x%x"),D_CMND_HM10,_buf[0],_buf[1],_buf[2],_buf[3],_buf[4],_buf[5],_buf[6]);
if(_buf[0]==0x4f && _buf[1]==0x4b) return; // "OK"
if(_buf[0] == 0){
if(_buf[1]==0 && _buf[2]==0 && _buf[3]==0 && _buf[4]==0) return;
memcpy(&CGD1_HT,(void *)_buf,5);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: T * 100: %u, H * 100: %u"),D_CMND_HM10,CGD1_HT.temp,CGD1_HT.hum);
uint32_t _slot = HM10.state.sensor;
DEBUG_SENSOR_LOG(PSTR("MIBLE: Sensor slot: %u"), _slot);
static float _tempFloat;
_tempFloat=(float)(CGD1_HT.temp)/100.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
HM10.mode.awaiting = none;
HM10.current_task_delay = 0;
MIBLEsensors[_slot].showedUp=255; // this sensor is real
}
_tempFloat=(float)CGD1_HT.hum/100.0f;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("CGD1: hum updated"));
}
}
}
void HM10readHT_MJ_HT_V1(char *_buf){
DEBUG_SENSOR_LOG(PSTR("%s: raw data: %x%x%x%x%x%x%x"),D_CMND_HM10,_buf[0],_buf[1],_buf[2],_buf[3],_buf[4],_buf[5],_buf[6]);
if(_buf[0]!=0x54 && _buf[1]!=0x3d) return; //"T="
// T=22.7 H=42.2 (response as ASCII)
// 0123456789012
uint32_t _temp = (atoi(_buf+2) * 10) + atoi(_buf+5);
uint32_t _hum = (atoi(_buf+9) * 10) + atoi(_buf+12);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: T * 10: %u, H * 10: %u"),D_CMND_HM10,_temp,_hum);
uint32_t _slot = HM10.state.sensor;
DEBUG_SENSOR_LOG(PSTR("MIBLE: Sensor slot: %u"), _slot);
static float _tempFloat;
_tempFloat=(float)_temp/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
HM10.mode.awaiting = none;
HM10.current_task_delay = 0;
MIBLEsensors[_slot].showedUp=255; // this sensor is real
}
_tempFloat=(float)_hum/10.0f;
if(_tempFloat<100){
MIBLEsensors[_slot].hum = _tempFloat;
DEBUG_SENSOR_LOG(PSTR("MJ_HT_V1: hum updated"));
}
}
void HM10readTLMF(char *_buf){
DEBUG_SENSOR_LOG(PSTR("%s: raw data: %x%x%x%x%x%x%x"),D_CMND_HM10,_buf[0],_buf[1],_buf[2],_buf[3],_buf[4],_buf[5],_buf[6]);
if(_buf[0]==0x4f && _buf[1]==0x4b) return; // "OK"
if(_buf[0] != 0 || _buf[1] != 0){ // this will lose 0.0 degree, but it is not possible to measure a successful reading
memcpy(&Flora_TLMF,(void *)_buf,10);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: T * 10: %u, L: %u, M: %u, F: %u"),D_CMND_HM10,Flora_TLMF.temp,Flora_TLMF.lux,Flora_TLMF.moist,Flora_TLMF.fert);
uint32_t _slot = HM10.state.sensor;
DEBUG_SENSOR_LOG(PSTR("MIBLE: Sensor slot: %u"), _slot);
static float _tempFloat;
_tempFloat=(float)(Flora_TLMF.temp)/10.0f;
if(_tempFloat<60){
MIBLEsensors[_slot].temp=_tempFloat;
MIBLEsensors[_slot].showedUp=255; // this sensor is real
}
MIBLEsensors[_slot].lux = Flora_TLMF.lux;
_tempFloat=(float)Flora_TLMF.moist;
if(_tempFloat<100){
MIBLEsensors[_slot].moisture = _tempFloat;
}
MIBLEsensors[_slot].fertility = (float)Flora_TLMF.fert;
HM10.mode.awaiting = none;
HM10.current_task_delay = 0;
}
}
bool HM10readBat(char *_buf){
DEBUG_SENSOR_LOG(PSTR("%s: raw data: %x%x%x%x%x%x%x"),D_CMND_HM10,_buf[0],_buf[1],_buf[2],_buf[3],_buf[4],_buf[5],_buf[6]);
if(_buf[0]==0x4f && _buf[1]==0x4b) return false; // "OK"
if(_buf[0] != 0){
AddLog_P2(LOG_LEVEL_DEBUG,PSTR("%s: Battery: %u"),D_CMND_HM10,_buf[0]);
uint32_t _slot = HM10.state.sensor;
DEBUG_SENSOR_LOG(PSTR("MIBLE: Sensor slot: %u"), _slot);
if(_buf[0]<101){
MIBLEsensors[_slot].bat=_buf[0];
MIBLEsensors[_slot].showedUp=255; // this sensor is real
return true;
}
}
return false;
}
/*********************************************************************************************\
* handle the return value from the HM10
\*********************************************************************************************/
bool HM10SerialHandleFeedback(){ // every 50 milliseconds
bool success = false;
uint32_t i = 0;
static char ret[HM10_MAX_RX_BUF] = {0};
while(HM10Serial->available()) {
// delay(0);
if(i<HM10_MAX_RX_BUF){
ret[i] = HM10Serial->read();
}
i++;
success = true;
}
if(i==0) return success;
switch (HM10.mode.awaiting){
case bat:
if (HM10.mode.connected) {
if (HM10readBat(ret)){
HM10.mode.awaiting = none;
HM10.current_task_delay = 0;
}
}
break;
case tempHumLY:
if (HM10.mode.connected) HM10readHT_LY(ret);
break;
case tempHumCGD1:
if (HM10.mode.connected) HM10readHT_CGD1(ret);
break;
case TLMF:
if (HM10.mode.connected) HM10readTLMF(ret);
break;
case discScan:
if(success) {
HM10ParseResponse(ret,i);
}
break;
case tempHumMJ:
if (HM10.mode.connected) HM10readHT_MJ_HT_V1(ret);
break;
case none:
if(success) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: response: %s"),D_CMND_HM10, (char *)ret);
// for(uint32_t j = 0; j<i+1; j+=8){
// AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%02x %02x %02x %02x %02x %02x %02x %02x"),(uint8_t)ret[j],(uint8_t)ret[j+1],(uint8_t)ret[j+2],(uint8_t)ret[j+3],(uint8_t)ret[j+4],(uint8_t)ret[j+5],(uint8_t)ret[j+6],(uint8_t)ret[j+7]);
// }
HM10ParseResponse(ret,i);
}
break;
}
memset(ret,0,i); // wipe away the recent bytes
return success;
}
/*********************************************************************************************\
* execute the next Task
\*********************************************************************************************/
void HM10_TaskEvery100ms(){
if (HM10.current_task_delay == 0) {
uint8_t i = 0;
bool runningTaskLoop = true;
while (runningTaskLoop) { // always iterate through the whole task list
switch(HM10_TASK_LIST[i][0]) { // handle the kind of task
case TASK_HM10_ROLE1:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: set role to 1"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+ROLE1");
break;
case TASK_HM10_IMME1:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: set imme to 1"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+IMME1");
break;
case TASK_HM10_DISC:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: start discovery"),D_CMND_HM10);
HM10.current_task_delay = 100; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.mode.awaiting = discScan;
HM10Serial->write("AT+DISA?");
break;
case TASK_HM10_VERSION:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read version"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+VERR?");
break;
case TASK_HM10_NAME:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read name"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+NAME?");
break;
case TASK_HM10_CONN:
char _con[20];
sprintf_P(_con,"AT+CON%02x%02x%02x%02x%02x%02x",MIBLEsensors[HM10.state.sensor].serial[0],MIBLEsensors[HM10.state.sensor].serial[1],MIBLEsensors[HM10.state.sensor].serial[2],MIBLEsensors[HM10.state.sensor].serial[3],MIBLEsensors[HM10.state.sensor].serial[4],MIBLEsensors[HM10.state.sensor].serial[5]);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: connect %s"),D_CMND_HM10, _con);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write(_con);
HM10.mode.awaiting = none;
HM10.mode.connected = true;
break;
case TASK_HM10_DISCONN:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: disconnect"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT");
break;
case TASK_HM10_RESET:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: Reset Device"),D_CMND_HM10);
HM10Serial->write("AT+RESET");
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
break;
case TASK_HM10_SUB_L3:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: subscribe"),D_CMND_HM10);
HM10.current_task_delay = 25; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
HM10.mode.awaiting = tempHumLY;
runningTaskLoop = false;
HM10Serial->write("AT+NOTIFY_ON0037");
break;
case TASK_HM10_UN_L3:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: un-subscribe"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.mode.awaiting = none;
HM10Serial->write("AT+NOTIFYOFF0037");
break;
case TASK_HM10_SUB_L2:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: subscribe"),D_CMND_HM10);
HM10.current_task_delay = 25; // set task delay
HM10.mode.awaiting = tempHumLY;
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+NOTIFY_ON003C");
break;
case TASK_HM10_UN_L2:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: un-subscribe"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.mode.awaiting = none;
HM10Serial->write("AT+NOTIFYOFF003C");
break;
case TASK_HM10_TIME_L2:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: set time"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.time = Rtc.utc_time;
HM10Serial->write("AT+SEND_DATAWR002F");
HM10Serial->write(HM10.timebuf,4);
HM10Serial->write(Rtc.time_timezone / 60);
AddLog_P2(LOG_LEVEL_DEBUG,PSTR("%s Time-string: %x%x%x%x%x"),D_CMND_HM10, HM10.timebuf[0],HM10.timebuf[1],HM10.timebuf[2],HM10.timebuf[3],(Rtc.time_timezone /60));
break;
case TASK_HM10_READ_BT_L3:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 003A"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA003A?");
HM10.mode.awaiting = bat;
break;
case TASK_HM10_READ_BT_L2:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 0043"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA0043?");
HM10.mode.awaiting = bat;
break;
case TASK_HM10_READ_BF_FL:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 0038"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA0038?");
HM10.mode.awaiting = bat;
break;
case TASK_HM10_CALL_TLMF_FL:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: write to handle 0033"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_READ_TLMF_FL,i);
runningTaskLoop = false;
HM10Serial->write("AT+SEND_DATAWR0033");
HM10Serial->write(0xa0);
HM10Serial->write(0x1f);
HM10.mode.awaiting = none;
break;
case TASK_HM10_READ_TLMF_FL:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 0035"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA0035?");
HM10.mode.awaiting = TLMF;
break;
case TASK_HM10_READ_B_CGD1:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 0011"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA0011?");
HM10.mode.awaiting = bat;
break;
case TASK_HM10_SUB_HT_CGD1:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: subscribe 4b"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.mode.awaiting = tempHumCGD1;
HM10Serial->write("AT+NOTIFY_ON004b");
break;
case TASK_HM10_UN_HT_CGD1:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: un-subscribe 4b"),D_CMND_HM10);
HM10.current_task_delay = 5; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10.mode.awaiting = none;
HM10Serial->write("AT+NOTIFYOFF004b");
break;
case TASK_HM10_SCAN9:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: scan time to 9"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+SCAN9");
break;
case TASK_HM10_READ_B_MJ:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: read handle 0x18"),D_CMND_HM10);
HM10.current_task_delay = 2; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+READDATA0018?");
HM10.mode.awaiting = bat;
break;
case TASK_HM10_SUB_HT_MJ:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: subscribe to 0x0f"),D_CMND_HM10);
HM10.current_task_delay = 10; // set task delay
HM10_TaskReplaceInSlot(TASK_HM10_FEEDBACK,i);
runningTaskLoop = false;
HM10Serial->write("AT+NOTIFY_ON000F");
HM10.mode.awaiting = tempHumMJ;
break;
case TASK_HM10_FEEDBACK:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: get response"),D_CMND_HM10);
HM10SerialHandleFeedback();
HM10.current_task_delay = HM10_TASK_LIST[i+1][1];; // set task delay
HM10_TASK_LIST[i][0] = TASK_HM10_DONE; // no feedback for reset
runningTaskLoop = false;
break;
case TASK_HM10_STATUS_EVENT:
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%s: show status"),D_CMND_HM10);
HM10StatusInfo();
HM10.current_task_delay = HM10_TASK_LIST[i+1][1];; // set task delay
HM10_TASK_LIST[i][0] = TASK_HM10_DONE; // no feedback for reset
runningTaskLoop = false;
break;
case TASK_HM10_DONE: // this entry was already handled
// AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%sFound done HM10_TASK"),D_CMND_HM10);
// AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%snext slot:%u, i: %u"),D_CMND_HM10, HM10_TASK_LIST[i+1][0],i);
if(HM10_TASK_LIST[i+1][0] == TASK_HM10_NOTASK) { // check the next entry and if there is none
DEBUG_SENSOR_LOG(PSTR("%sno Tasks left"),D_CMND_HM10);
DEBUG_SENSOR_LOG(PSTR("%sHM10_TASK_DONE current slot %u"),D_CMND_HM10, i);
for (uint8_t j = 0; j < HM10_MAX_TASK_NUMBER+1; j++) { // do a clean-up:
DEBUG_SENSOR_LOG(PSTR("%sHM10_TASK cleanup slot %u"),D_CMND_HM10, j);
HM10_TASK_LIST[j][0] = TASK_HM10_NOTASK; // reset all task entries
HM10_TASK_LIST[j][1] = 0; // reset all delays
}
runningTaskLoop = false; // return to main loop
HM10.mode.pending_task = 0; // back to main loop control
break;
}
}
i++;
}
}
else {
HM10.current_task_delay--; // count down every 100 ms
}
}
void HM10StatusInfo() {
/*
char stemp[20];
snprintf_P(stemp, sizeof(stemp),PSTR("{%s:{\"found\": %u}}"),D_CMND_HM10, MIBLEsensors.size());
AddLog_P2(LOG_LEVEL_INFO, stemp);
RulesProcessEvent(stemp);
*/
Response_P(PSTR("{%s:{\"found\":%u}}"), D_CMND_HM10, MIBLEsensors.size());
XdrvRulesProcess();
}
/**
* @brief Main loop of the driver, "high level"-loop
*
*/
void HM10EverySecond(bool restart){
static uint32_t _counter = 0;
static uint32_t _nextSensorSlot = 0;
static uint32_t _lastDiscovery = 0;
if(restart){
_counter = 0;
_lastDiscovery = 0;
return;
}
if(HM10.firmware == 0) return;
if(HM10.mode.pending_task == 1) return;
if(MIBLEsensors.size()==0 && !HM10.mode.autoScan) return;
if((HM10.period-_counter)>15 && HM10.mode.autoScan) {
if(_counter-_lastDiscovery>HM10.autoScanInterval){
HM10_Discovery_Scan();
HM10.mode.pending_task = 1;
_counter+=12;
_lastDiscovery = _counter;
return;
}
}
if(_counter==0) {
HM10.state.sensor = _nextSensorSlot;
_nextSensorSlot++;
HM10.mode.pending_task = 1;
switch(MIBLEsensors[HM10.state.sensor].type){
case FLORA:
HM10_Read_Flora();
break;
case MJ_HT_V1: case CGG1:
HM10_Read_MJ_HT_V1();
break;
case LYWSD02:
HM10_Read_LYWSD02();
break;
case LYWSD03MMC:
HM10_Read_LYWSD03();
break;
case CGD1:
HM10_Read_CGD1();
break;
default:
HM10.mode.pending_task = 0;
}
if (HM10.state.sensor==MIBLEsensors.size()-1) {
_nextSensorSlot= 0;
_counter++;
}
DEBUG_SENSOR_LOG(PSTR("%s: active sensor now: %u"),D_CMND_HM10, HM10.state.sensor);
}
else _counter++;
if (_counter>HM10.period) {
_counter = 0;
_lastDiscovery = 0;
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
bool HM10Cmd(void) {
char command[CMDSZ];
bool serviced = true;
uint8_t disp_len = strlen(D_CMND_HM10);
if (!strncasecmp_P(XdrvMailbox.topic, PSTR(D_CMND_HM10), disp_len)) { // prefix
uint32_t command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic + disp_len, kHM10_Commands);
switch (command_code) {
case CMND_HM10_PERIOD:
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload==1) {
HM10EverySecond(true);
XdrvMailbox.payload = HM10.period;
}
else {
HM10.period = XdrvMailbox.payload;
}
}
else {
XdrvMailbox.payload = HM10.period;
}
Response_P(S_JSON_HM10_COMMAND_NVALUE, command, XdrvMailbox.payload);
break;
case CMND_HM10_AUTO:
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload>0) {
HM10.mode.autoScan = 1;
HM10.autoScanInterval = XdrvMailbox.payload;
}
else {
HM10.mode.autoScan = 0;
HM10.autoScanInterval = 0;
}
}
else {
XdrvMailbox.payload = HM10.autoScanInterval;
}
Response_P(S_JSON_HM10_COMMAND_NVALUE, command, XdrvMailbox.payload);
break;
case CMND_HM10_BAUD:
if (XdrvMailbox.data_len > 0) {
HM10.serialSpeed = XdrvMailbox.payload;
HM10Serial->begin(HM10.serialSpeed);
}
else {
XdrvMailbox.payload = HM10.serialSpeed;
}
Response_P(S_JSON_HM10_COMMAND_NVALUE, command, XdrvMailbox.payload);
break;
case CMND_HM10_TIME:
if (XdrvMailbox.data_len > 0) {
if(MIBLEsensors.size()>XdrvMailbox.payload){
if(MIBLEsensors[XdrvMailbox.payload].type == LYWSD02){
HM10.state.sensor = XdrvMailbox.payload;
HM10_Time_LYWSD02();
}
}
}
Response_P(S_JSON_HM10_COMMAND_NVALUE, command, XdrvMailbox.payload);
break;
case CMND_HM10_PAGE:
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload == 0) XdrvMailbox.payload = HM10.perPage; // ignore 0
HM10.perPage = XdrvMailbox.payload;
}
else XdrvMailbox.payload = HM10.perPage;
Response_P(S_JSON_HM10_COMMAND_NVALUE, command, XdrvMailbox.payload);
break;
case CMND_HM10_AT:
HM10Serial->write("AT"); // without an argument this will disconnect
if (strlen(XdrvMailbox.data)!=0) {
HM10Serial->write("+");
HM10Serial->write(XdrvMailbox.data); // pass everything without checks
Response_P(S_JSON_HM10_COMMAND, ":AT+",XdrvMailbox.data);
}
else Response_P(S_JSON_HM10_COMMAND, ":AT",XdrvMailbox.data);
break;
case CMND_HM10_DISC_SCAN:
HM10_Discovery_Scan();
Response_P(S_JSON_HM10_COMMAND, command, "");
break;
default:
// else for Unknown command
serviced = false;
break;
}
} else {
return false;
}
return serviced;
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
const char HTTP_HM10[] PROGMEM = "{s}HM10 V%u{m}%u%s / %u{e}";
const char HTTP_HM10_SERIAL[] PROGMEM = "{s}%s %s{m}%02x:%02x:%02x:%02x:%02x:%02x%{e}";
const char HTTP_BATTERY[] PROGMEM = "{s}%s" " Battery" "{m}%u%%{e}";
const char HTTP_HM10_FLORA_DATA[] PROGMEM = "{s}%s" " Fertility" "{m}%uus/cm{e}";
const char HTTP_HM10_HL[] PROGMEM = "{s}<hr>{m}<hr>{e}";
void HM10Show(bool json)
{
if (json) {
for (uint32_t i = 0; i < MIBLEsensors.size(); i++) {
char slave[33];
sprintf_P(slave,"%s-%02x%02x%02x",kHM10SlaveType[MIBLEsensors[i].type-1],MIBLEsensors[i].serial[3],MIBLEsensors[i].serial[4],MIBLEsensors[i].serial[5]);
ResponseAppend_P(PSTR(",\"%s\":{"),slave);
if (MIBLEsensors[i].type==FLORA){
if(!isnan(MIBLEsensors[i].temp)){ // this is the error code -> no temperature
char temperature[FLOATSZ]; // all sensors have temperature
dtostrfd(MIBLEsensors[i].temp, Settings.flag2.temperature_resolution, temperature);
ResponseAppend_P(PSTR("\"" D_JSON_TEMPERATURE "\":%s"), temperature);
}
else {
ResponseAppend_P(PSTR("}"));
continue;
}
if(MIBLEsensors[i].lux!=0x0ffffff){ // this is the error code -> no lux
ResponseAppend_P(PSTR(",\"" D_JSON_ILLUMINANCE "\":%u"), MIBLEsensors[i].lux);
}
if(!isnan(MIBLEsensors[i].moisture)){
ResponseAppend_P(PSTR(",\"" D_JSON_MOISTURE "\":%d"), MIBLEsensors[i].moisture);
}
if(!isnan(MIBLEsensors[i].fertility)){
ResponseAppend_P(PSTR(",\"Fertility\":%d"), MIBLEsensors[i].fertility);
}
}
if (MIBLEsensors[i].type>FLORA){
if(!isnan(MIBLEsensors[i].hum) && !isnan(MIBLEsensors[i].temp)){
ResponseAppendTHD(MIBLEsensors[i].temp, MIBLEsensors[i].hum);
}
}
if(MIBLEsensors[i].bat!=0x00){ // this is the error code -> no battery
ResponseAppend_P(PSTR(",\"Battery\":%u"), MIBLEsensors[i].bat);
}
ResponseAppend_P(PSTR("}"));
}
#ifdef USE_WEBSERVER
} else {
static uint16_t _page = 0;
static uint16_t _counter = 0;
int32_t i = _page * HM10.perPage;
uint32_t j = i + HM10.perPage;
if (j+1>MIBLEsensors.size()){
j = MIBLEsensors.size();
}
char stemp[5] ={0};
if (MIBLEsensors.size()-(_page*HM10.perPage)>1 && HM10.perPage!=1) {
sprintf_P(stemp,"-%u",j);
}
if (MIBLEsensors.size()==0) i=-1; // only for the GUI
WSContentSend_PD(HTTP_HM10, HM10.firmware, i+1,stemp,MIBLEsensors.size());
for (i; i<j; i++) {
WSContentSend_PD(HTTP_HM10_HL);
WSContentSend_PD(HTTP_HM10_SERIAL, kHM10SlaveType[MIBLEsensors[i].type-1], D_MAC_ADDRESS, MIBLEsensors[i].serial[0], MIBLEsensors[i].serial[1],MIBLEsensors[i].serial[2],MIBLEsensors[i].serial[3],MIBLEsensors[i].serial[4],MIBLEsensors[i].serial[5]);
if (MIBLEsensors[i].type==FLORA){
if(!isnan(MIBLEsensors[i].temp)){
char temperature[FLOATSZ];
dtostrfd(MIBLEsensors[i].temp, Settings.flag2.temperature_resolution, temperature);
WSContentSend_PD(HTTP_SNS_TEMP, kHM10SlaveType[MIBLEsensors[i].type-1], temperature, TempUnit());
}
if(MIBLEsensors[i].lux!=0x00ffffff){ // this is the error code -> no valid value
WSContentSend_PD(HTTP_SNS_ILLUMINANCE, kHM10SlaveType[MIBLEsensors[i].type-1], MIBLEsensors[i].lux);
}
if(!isnan(MIBLEsensors[i].moisture)){
WSContentSend_PD(HTTP_SNS_MOISTURE, kHM10SlaveType[MIBLEsensors[i].type-1], MIBLEsensors[i].moisture);
}
if(!isnan(MIBLEsensors[i].fertility)){
WSContentSend_PD(HTTP_HM10_FLORA_DATA, kHM10SlaveType[MIBLEsensors[i].type-1], MIBLEsensors[i].fertility);
}
}
if (MIBLEsensors[i].type>FLORA){ // everything "above" Flora
if(!isnan(MIBLEsensors[i].hum) && !isnan(MIBLEsensors[i].temp)){
WSContentSend_THD(kHM10SlaveType[MIBLEsensors[i].type-1], MIBLEsensors[i].temp, MIBLEsensors[i].hum);
}
}
if(MIBLEsensors[i].bat!=0x00){
WSContentSend_PD(HTTP_BATTERY, kHM10SlaveType[MIBLEsensors[i].type-1], MIBLEsensors[i].bat);
}
}
_counter++;
if(_counter>3) {
_page++;
_counter=0;
}
if(MIBLEsensors.size()%HM10.perPage==0 && _page==MIBLEsensors.size()/HM10.perPage) _page=0;
if(_page>MIBLEsensors.size()/HM10.perPage) _page=0;
#endif // USE_WEBSERVER
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xsns62(uint8_t function)
{
bool result = false;
if (PinUsed(GPIO_HM10_RX) && PinUsed(GPIO_HM10_TX)) {
switch (function) {
case FUNC_INIT:
HM10SerialInit(); // init and start communication
break;
case FUNC_EVERY_50_MSECOND:
HM10SerialHandleFeedback(); // check for device feedback very often
break;
case FUNC_EVERY_100_MSECOND:
if (HM10_TASK_LIST[0][0] != TASK_HM10_NOTASK) {
HM10_TaskEvery100ms(); // something has to be done, we'll check in the next step
}
break;
case FUNC_EVERY_SECOND:
HM10EverySecond(false);
break;
case FUNC_COMMAND:
result = HM10Cmd();
break;
case FUNC_JSON_APPEND:
HM10Show(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
HM10Show(0);
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_HM10
#endif // ESP8266
Reference in New Issue View Git Blame Copy Permalink