mirror of https://github.com/arendst/Tasmota.git
1343 lines
56 KiB
C++
1343 lines
56 KiB
C++
/*
|
|
xdrv_86_esp32_sonoff_spm.ino - Sonoff SPM support for Tasmota
|
|
|
|
Copyright (C) 2021 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
//#define USE_SONOFF_SPM
|
|
|
|
#ifdef ESP32
|
|
#ifdef USE_SONOFF_SPM
|
|
/*********************************************************************************************\
|
|
* Sonoff Stackable Power Manager (Current state: PROOF OF CONCEPT)
|
|
*
|
|
* Initial POC template:
|
|
* {"NAME":"Sonoff SPM (POC1)","GPIO":[1,1,1,1,3200,1,1,1,1,1,1,1,3232,1,1,1,0,1,1,1,0,1,1,1,0,0,0,0,544,1,1,32,1,0,0,1],"FLAG":0,"BASE":1}
|
|
* Add ethernet support:
|
|
* {"NAME":"Sonoff SPM (POC2)","GPIO":[1,0,1,0,3200,5536,0,0,1,1,1,0,3232,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,544,1,1,32,1,0,0,1],"FLAG":0,"BASE":1}
|
|
* Remove all user selectable GPIOs:
|
|
* {"NAME":"Sonoff SPM (POC2)","GPIO":[0,0,0,0,3200,5536,0,0,0,0,0,0,3232,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,544,0,0,32,0,0,0,0],"FLAG":0,"BASE":1}
|
|
*
|
|
* Things to know:
|
|
* Bulk of the action is handled by ARM processors present in every unit communicating over modbus RS-485.
|
|
* Each SPM-4Relay has 4 bistable relays with their own CSE7761 energy monitoring device handled by an ARM processor.
|
|
* Green led is controlled by ARM processor indicating SD-Card access.
|
|
* ESP32 is used as interface between eWelink and ARM processor in SPM-Main unit communicating over proprietary serial protocol.
|
|
* Power on sequence for two SPM-4Relay modules is 00-00-15-10-(0F)-(13)-(13)-(19)-0C-09-04-09-04-0B-0B
|
|
*
|
|
* Tasmota POC1:
|
|
* Up to 7 SPM-4Relay units supporting up to 28 relays.
|
|
* Gui rotating energy display for 4 relays at a time.
|
|
* Button on SPM-Main initiates re-scan of SPM-4Relay units.
|
|
* Blue led equals Tasmota WiFi status.
|
|
*
|
|
* Tasmota POC2:
|
|
* Ethernet support.
|
|
* Gui optimized for energy display.
|
|
* Yellow led lights if no ARM connection can be made.
|
|
* Yellow led blinks 2 seconds if an ARM-ESP comms CRC error is detected.
|
|
* Supported commands:
|
|
* SspmDisplay 0|1 - Select alternative GUI rotating display either all or powered on only
|
|
* SspmIAmHere<relay> - Blink ERROR in SPM-4Relay where relay resides
|
|
* SspmScan - Rescan ARM modbus taking around 20 seconds
|
|
* SspmReset 1 - Reset ARM and restart ESP
|
|
*
|
|
* Todo:
|
|
* Gui for Overload Protection entry (is handled by ARM processor).
|
|
* Gui for Scheduling entry (is handled by ARM processor).
|
|
* SPI master to ARM (ARM firmware upload from ESP using EasyFlash).
|
|
*
|
|
* Nice to have:
|
|
* Support for all 32 SPM-4Relay units equals 128 relays (restricted due to internal Tasmota register use)
|
|
*
|
|
* GPIO's used:
|
|
* GPIO00 - Bootmode / serial flash
|
|
* GPIO01 - Serial console TX (921600bps8N1 originally)
|
|
* GPIO03 - Serial console RX
|
|
* GPIO04 - ARM processor TX (115200bps8N1)
|
|
* GPIO05 - ETH POWER
|
|
* GPIO12 - SPI MOSI ARM output (pin36 - PB15) - ESP input
|
|
* GPIO13 - SPI MISO ESP output - ARM input (pin35 - PB14)
|
|
* GPIO14 - SPI CLK ESP input (ARM pin34 - PB13)
|
|
* GPIO15 - ARM reset (output) - 18ms low active 125ms after restart esp32
|
|
* GPIO16 - ARM processor RX
|
|
* GPIO17 - EMAC_CLK_OUT_180
|
|
* GPIO18 - ETH MDIO
|
|
* GPIO19 - EMAC_TXD0(RMII)
|
|
* GPIO21 - EMAC_TX_EN(RMII)
|
|
* GPIO22 - EMAC_TXD1(RMII)
|
|
* GPIO23 - ETH MDC
|
|
* GPIO25 - EMAC_RXD0(RMII)
|
|
* GPIO26 - EMAC_RXD1(RMII)
|
|
* GPIO27 - EMAC_RX_CRS_DV
|
|
* GPIO32 - Blue status led2
|
|
* GPIO33 - Yellow error led3
|
|
* GPIO35 - Button
|
|
* #define ETH_TYPE ETH_PHY_LAN8720
|
|
* #define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
|
|
* #define ETH_ADDRESS 0
|
|
*
|
|
* Variables used:
|
|
* module = 0 to 31 SPM-4Relays
|
|
* channel = 0 to 3 or 01, 02, 04, 08 Bitmask of four relays in module
|
|
* relay = 0 to 127 Relays
|
|
\*********************************************************************************************/
|
|
|
|
#define SSPM_JSON_ENERGY_TODAY // Show JSON energy today
|
|
#define SSPM_JSON_ENERGY_YESTERDAY // Show JSON energy yesterday
|
|
|
|
/*********************************************************************************************\
|
|
* Fixed defines - Do not change
|
|
\*********************************************************************************************/
|
|
|
|
#define XDRV_86 86
|
|
|
|
#define SSPM_MAX_MODULES 7 // Currently supports up to 7 SPM-4RELAY units for a total of 28 relays restricted by power_t size
|
|
#define SSPM_SERIAL_BUFFER_SIZE 512 // Needs to accomodate Energy total history for six months (408 bytes)
|
|
|
|
// Send
|
|
#define SSPM_FUNC_FIND 0 // 0x00
|
|
#define SSPM_FUNC_SET_OPS 3 // 0x03 - Overload Protection
|
|
#define SSPM_FUNC_GET_OPS 4 // 0x04
|
|
#define SSPM_FUNC_SET_RELAY 8 // 0x08
|
|
#define SSPM_FUNC_GET_MODULE_STATE 9 // 0x09 - State of four channels
|
|
#define SSPM_FUNC_SET_SCHEME 10 // 0x0A
|
|
#define SSPM_FUNC_GET_SCHEME 11 // 0x0B
|
|
#define SSPM_FUNC_SET_TIME 12 // 0x0C
|
|
#define SSPM_FUNC_IAMHERE 13 // 0x0D
|
|
#define SSPM_FUNC_INIT_SCAN 16 // 0x10
|
|
#define SSPM_FUNC_UNITS 21 // 0x15
|
|
#define SSPM_FUNC_GET_ENERGY_TOTAL 22 // 0x16
|
|
#define SSPM_FUNC_GET_ENERGY 24 // 0x18
|
|
#define SSPM_FUNC_GET_LOG 26 // 0x1A
|
|
#define SSPM_FUNC_ENERGY_PERIOD 27 // 0x1B
|
|
#define SSPM_FUNC_RESET 28 // 0x1C - Remove device from eWelink and factory reset
|
|
|
|
// Receive
|
|
#define SSPM_FUNC_ENERGY_RESULT 6 // 0x06
|
|
#define SSPM_FUNC_KEY_PRESS 7 // 0x07
|
|
#define SSPM_FUNC_SCAN_START 15 // 0x0F
|
|
#define SSPM_FUNC_SCAN_RESULT 19 // 0x13
|
|
#define SSPM_FUNC_SCAN_DONE 25 // 0x19
|
|
|
|
#define SSPM_GPIO_ARM_RESET 15
|
|
#define SSPM_GPIO_LED_ERROR 33
|
|
|
|
#define SSPM_MODULE_NAME_SIZE 12
|
|
|
|
/*********************************************************************************************/
|
|
|
|
enum SspmMachineStates { SPM_NONE, // Do nothing
|
|
SPM_WAIT, // Wait 100ms
|
|
SPM_RESET, // Toggle ARM reset pin
|
|
SPM_POLL_ARM, // Wait for first acknowledge from ARM after reset
|
|
SPM_POLL_ARM_2, // Wait for second acknowledge from ARM after reset
|
|
SPM_SEND_FUNC_UNITS, // Get number of units
|
|
SPM_START_SCAN, // Start module scan sequence
|
|
SPM_WAIT_FOR_SCAN, // Wait for scan sequence to complete
|
|
SPM_SCAN_COMPLETE, // Scan complete
|
|
SPM_GET_ENERGY_TOTALS, // Init available Energy totals registers
|
|
SPM_UPDATE_CHANNELS // Update Energy for powered on channels
|
|
};
|
|
|
|
#include <TasmotaSerial.h>
|
|
TasmotaSerial *SspmSerial;
|
|
|
|
typedef struct {
|
|
float voltage[SSPM_MAX_MODULES][4]; // 123.12 V
|
|
float current[SSPM_MAX_MODULES][4]; // 123.12 A
|
|
float active_power[SSPM_MAX_MODULES][4]; // 123.12 W
|
|
float apparent_power[SSPM_MAX_MODULES][4]; // 123.12 VA
|
|
float reactive_power[SSPM_MAX_MODULES][4]; // 123.12 VAr
|
|
float power_factor[SSPM_MAX_MODULES][4]; // 0.12
|
|
float energy_today[SSPM_MAX_MODULES][4]; // 12345 kWh
|
|
float energy_yesterday[SSPM_MAX_MODULES][4]; // 12345 kWh
|
|
float energy_total[SSPM_MAX_MODULES][4]; // 12345 kWh total energy since last 6 month!!!
|
|
|
|
uint32_t timeout;
|
|
power_t old_power;
|
|
uint16_t last_totals;
|
|
uint16_t serial_in_byte_counter;
|
|
uint16_t expected_bytes;
|
|
uint8_t module[SSPM_MAX_MODULES][SSPM_MODULE_NAME_SIZE];
|
|
|
|
uint8_t allow_updates;
|
|
uint8_t get_energy_relay;
|
|
uint8_t get_totals;
|
|
uint8_t rotate;
|
|
uint8_t module_max;
|
|
uint8_t module_selected;
|
|
uint8_t no_send_key;
|
|
uint8_t counter;
|
|
uint8_t command_sequence;
|
|
uint8_t mstate;
|
|
uint8_t last_button;
|
|
uint8_t error_led_blinks;
|
|
bool discovery_triggered;
|
|
} TSspm;
|
|
|
|
uint8_t *SspmBuffer = nullptr;
|
|
TSspm *Sspm = nullptr;
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void SSPMSetLock(uint32_t seconds) {
|
|
Sspm->timeout = seconds * 10; // Decremented every 100mSec
|
|
Sspm->allow_updates = 0; // Disable requests from 100mSec loop
|
|
}
|
|
|
|
uint16_t SSPMCalculateCRC(uint8_t *frame, uint32_t num) {
|
|
// CRC-16/ARC (polynomial 0x8005 reflected as 0xA001)
|
|
uint16_t crc = 0;
|
|
for (uint32_t i = 2; i < num; i++) {
|
|
crc ^= frame[i];
|
|
for (uint32_t i = 0; i < 8; i++) {
|
|
crc = (crc & 1) ? (crc >> 1) ^ 0xA001 : crc >> 1;
|
|
}
|
|
}
|
|
return crc ^ 0;
|
|
}
|
|
|
|
void SSPMSend(uint32_t size) {
|
|
uint16_t crc = SSPMCalculateCRC(SspmBuffer, size -2);
|
|
SspmBuffer[size -2] = (uint8_t)(crc >> 8);
|
|
SspmBuffer[size -1] = (uint8_t)crc;
|
|
|
|
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: ESP %*_H"), size, SspmBuffer);
|
|
|
|
SspmSerial->write(SspmBuffer, size);
|
|
}
|
|
|
|
void SSPMSendAck(uint32_t command_sequence) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 0f 00 01 00 01 3d e6
|
|
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
|
|
*/
|
|
SspmBuffer[15] = 0x80;
|
|
SspmBuffer[17] = 0x00;
|
|
SspmBuffer[18] = 0x01;
|
|
SspmBuffer[19] = 0x00;
|
|
SspmBuffer[20] = command_sequence;
|
|
|
|
SSPMSend(23);
|
|
}
|
|
|
|
void SSPMInitSend(void) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
Marker |Module id |Ac|Cm|Size |
|
|
*/
|
|
memset(SspmBuffer, 0, 19);
|
|
SspmBuffer[0] = 0xAA;
|
|
SspmBuffer[1] = 0x55;
|
|
SspmBuffer[2] = 0x01;
|
|
}
|
|
|
|
void SSPMSendCmnd(uint32_t command) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 51
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
*/
|
|
SSPMInitSend();
|
|
SspmBuffer[16] = command;
|
|
if (0 == command) {
|
|
Sspm->command_sequence = 0;
|
|
} else {
|
|
Sspm->command_sequence++;
|
|
}
|
|
SspmBuffer[19] = Sspm->command_sequence;
|
|
|
|
SSPMSend(22);
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void SSPMSendOPS(uint32_t relay_num) {
|
|
/*
|
|
Overload Protection
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 03 00 12 04 00 11 30 00 00 00 0a 00 f0 00 00 00 0a 00 14 00 00 fb a6 f8 = Default settings
|
|
Marker |Module id |Ac|Cm|Size |Ch|Ra|Max P |Min P |Max U |Min U |Max I |De|Ix|Chksm|
|
|
| | | 4400W| 0.1W| 240V| 0.1V| 20A| |
|
|
Ch - Bitmask channel 01 = 1, 02 = 2, 04 = 3, 08 = 4
|
|
Ra - Bitmask enabled features xxxxxxx1 Enable Max current
|
|
Ra - Bitmask enabled features xxxxxx1x Enable Min voltage
|
|
Ra - Bitmask enabled features xxxxx1xx Enable Max voltage
|
|
Ra - Bitmask enabled features xxxx1xxx Enable Min power
|
|
Ra - Bitmask enabled features xxx1xxxx Enable Max power
|
|
De - 0 to 255 seconds Overload detection delay
|
|
Values are XX XX - number
|
|
XX - decimals
|
|
|
|
Acknowledge:
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 03 00 01 00 14 08 bc
|
|
|Ac|Cm|Size |Rt|Ix|Chksm|
|
|
Ac - Acknowledge or error number
|
|
Rt - Return code
|
|
*/
|
|
|
|
SspmBuffer[16] = SSPM_FUNC_SET_OPS; // 0x03
|
|
|
|
}
|
|
|
|
void SSPMSendGetOps(uint32_t module) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
|
|
aa 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 04 00 00 08 c0 0a
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
*/
|
|
SSPMInitSend();
|
|
memcpy(SspmBuffer +3, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[16] = SSPM_FUNC_GET_OPS; // 0x04
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[19] = Sspm->command_sequence;
|
|
|
|
SSPMSend(22);
|
|
}
|
|
|
|
void SSPMSendSetRelay(uint32_t relay, uint32_t state) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 08 00 01 44 08 c0 34
|
|
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
|
|
*/
|
|
uint8_t channel = 1 << (relay & 0x03); // Channel relays are bit masked
|
|
if (state) {
|
|
channel |= (channel << 4);
|
|
}
|
|
uint8_t module = relay >> 2;
|
|
SSPMInitSend();
|
|
memcpy(SspmBuffer +3, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[16] = SSPM_FUNC_SET_RELAY; // 0x08
|
|
SspmBuffer[18] = 0x01;
|
|
SspmBuffer[19] = channel;
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[20] = Sspm->command_sequence;
|
|
|
|
SSPMSend(23);
|
|
}
|
|
|
|
void SSPMSendGetModuleState(uint32_t module) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 09 00 01 0f 05 b5 de
|
|
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
|
|
*/
|
|
SSPMInitSend();
|
|
memcpy(SspmBuffer +3, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[16] = SSPM_FUNC_GET_MODULE_STATE; // 0x09
|
|
SspmBuffer[18] = 0x01;
|
|
SspmBuffer[19] = 0x0F; // State of all four relays
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[20] = Sspm->command_sequence;
|
|
|
|
SSPMSend(23);
|
|
}
|
|
|
|
void SSPMSendScheme(uint32_t relay) {
|
|
/*
|
|
Time scheme
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
|
|
One time
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 1e 01 01 01 07 e5 0b 0e 0b 38 08 00 6b 01 00 ea 60 20 23 1b 04 fd 7a 83 05 63 ee dd a9 b9 3a 7e 14 95
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 1e 01 01 01 07 e5 0b 0e 0c 04 35 00 55 01 02 46 76 0e 0c 20 e1 22 7c 67 ab 9c 66 73 6d bd e8 7f 50 d4
|
|
Marker |Module id |Ac|Cm|Size |No| |Mo| YYYY|MM|DD|HH|MM |St|Re|Scheme id |
|
|
No - Number of schemes defined
|
|
Mo - Scheme type (1 = temporarly, 2 = scheduled)
|
|
Re - Relay 0 to 3
|
|
St - State (0 = off, 1 = On)
|
|
|
|
Scheduled On
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 15 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 80 5b 48
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 15 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 82 9a c9
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 83 44 aa
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 84 e0 22
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 86 e3 fa
|
|
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 2f 02 01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a
|
|
01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 87 e8 02
|
|
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 2f 02 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24
|
|
01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 89 6e e6
|
|
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 4c 03 01 01 07 e5 0b 0e 0e 0e 26 00 e7 01 00 e6 b2 48 8e ef be ce 78 3e 5d a8 3a c0 c5 6f 5e = One time
|
|
01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 = 14:11 OFF CH3 SuMoThSa
|
|
01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 8a 2f f8 = 14:59 ON CH4 MoTuWe
|
|
|
|
Marker |Module id |Ac|Cm|Size |No| |Mo|Dy|HH|MM|St|Re|Scheme id |
|
|
Dy - Bitmask days xxxxxxx1 sunday
|
|
xxxxxx1x monday
|
|
xxxxx1xx tuesday
|
|
xxxx1xxx wednesday
|
|
xxx1xxxx thursday
|
|
xx1xxxxx friday
|
|
x1xxxxxx saturday
|
|
|
|
Scheduled Off
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 01 00 81 26 9f
|
|
Schedule 2 off
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 88 e5 22
|
|
Marker |Module id |Ac|Cm|Size |
|
|
*/
|
|
|
|
SspmBuffer[16] = SSPM_FUNC_SET_SCHEME; // 0x0A
|
|
|
|
}
|
|
|
|
void SSPMSendGetScheme(uint32_t module) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 0b 00 00 09 14 c8
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
*/
|
|
SSPMInitSend();
|
|
memcpy(SspmBuffer +3, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[16] = SSPM_FUNC_GET_SCHEME; // 0x0B
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[19] = Sspm->command_sequence;
|
|
|
|
SSPMSend(22);
|
|
}
|
|
|
|
void SSPMSendSetTime(void) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 0b 07 e5 0b 06 0c 39 01 00 00 02 00 04 8a 37
|
|
Marker |Module id |Ac|Cm|Size |YY YY MM DD HH MM SS|Ln|St|Tzone|Ix|Chksm|
|
|
UTC time
|
|
Tzone = Time zone, [-12,+14], can be a decimal, such as 7.5
|
|
*/
|
|
SSPMInitSend();
|
|
SspmBuffer[16] = SSPM_FUNC_SET_TIME; // 0x0C
|
|
SspmBuffer[18] = 0x0B;
|
|
TIME_T time;
|
|
BreakTime(Rtc.utc_time, time);
|
|
uint16_t year = time.year + 1970;
|
|
SspmBuffer[19] = year >> 8;
|
|
SspmBuffer[20] = year;
|
|
SspmBuffer[21] = time.month;
|
|
SspmBuffer[22] = time.day_of_month;
|
|
SspmBuffer[23] = time.hour;
|
|
SspmBuffer[24] = time.minute;
|
|
SspmBuffer[25] = time.second;
|
|
SspmBuffer[26] = 0;
|
|
SspmBuffer[27] = 0;
|
|
SspmBuffer[28] = Rtc.time_timezone / 60;
|
|
SspmBuffer[29] = abs(Rtc.time_timezone % 60);
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[30] = Sspm->command_sequence;
|
|
|
|
SSPMSend(33);
|
|
}
|
|
|
|
void SSPMSendIAmHere(uint32_t relay) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0d 00 00 17 35 b6
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
|
|
Response is blink green COMM led on SPM-4Relay
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 0d 00 01 00 17 48 b5
|
|
Marker |Module id |Ac|Cm|Size |Rs|Ix|Chksm|
|
|
Rs = Return state
|
|
*/
|
|
uint8_t module = relay >> 2;
|
|
SSPMInitSend();
|
|
memcpy(SspmBuffer +3, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[16] = SSPM_FUNC_IAMHERE; // 0x0D
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[19] = Sspm->command_sequence;
|
|
|
|
SSPMSend(22);
|
|
}
|
|
|
|
void SSPMSendInitScan(void) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
|
|
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 00 10 00 00 02 cd f0
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
|
|
Acknowledge:
|
|
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 80 10 00 01 00 02 e5 03
|
|
|Ac|Cm|Size |Rt|Ix|Chksm|
|
|
*/
|
|
SSPMSetLock(30); // Disable requests from 100mSec loop
|
|
|
|
memset(SspmBuffer, 0xFF, 15);
|
|
SspmBuffer[0] = 0xAA;
|
|
SspmBuffer[1] = 0x55;
|
|
SspmBuffer[2] = 0x01;
|
|
|
|
SspmBuffer[15] = 0;
|
|
SspmBuffer[16] = SSPM_FUNC_INIT_SCAN; // 0x10
|
|
SspmBuffer[17] = 0;
|
|
SspmBuffer[18] = 0;
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[19] = Sspm->command_sequence;
|
|
|
|
SSPMSend(22);
|
|
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Start relay scan..."));
|
|
}
|
|
|
|
void SSPMSendGetEnergyTotal(uint32_t relay) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 0d 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 14 e6 93
|
|
Marker | | |Cm|Size |Module id |Ch|Ix|Chksm|
|
|
*/
|
|
uint8_t module = relay >> 2;
|
|
uint8_t channel = relay & 0x03; // Channel relays are NOT bit masked this time
|
|
SSPMInitSend();
|
|
SspmBuffer[16] = SSPM_FUNC_GET_ENERGY_TOTAL; // 0x16
|
|
SspmBuffer[18] = 0x0D;
|
|
memcpy(SspmBuffer +19, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[31] = channel;
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[32] = Sspm->command_sequence;
|
|
|
|
SSPMSend(35);
|
|
}
|
|
|
|
void SSPMSendGetEnergy(uint32_t relay) {
|
|
/*
|
|
relay_num = 1..8
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 10 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 01 00 3c 2a db d1
|
|
Marker | | |Cm|Size |Module id | |Ch| |Ix|Chksm|
|
|
*/
|
|
uint8_t module = relay >> 2;
|
|
uint8_t channel = 1 << (relay & 0x03); // Channel relays are bit masked
|
|
SSPMInitSend();
|
|
SspmBuffer[16] = SSPM_FUNC_GET_ENERGY; // 0x18
|
|
SspmBuffer[18] = 0x10;
|
|
memcpy(SspmBuffer +19, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[31] = 0x01;
|
|
SspmBuffer[32] = channel;
|
|
SspmBuffer[33] = 0;
|
|
SspmBuffer[34] = 0x3C;
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[35] = Sspm->command_sequence;
|
|
|
|
SSPMSend(38);
|
|
}
|
|
|
|
void SSPMSendGetLog(uint32_t relay, uint32_t entries) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1a 00 10 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 00 00 1d 09 8c cd
|
|
Marker | | |Cm|Size |Module id |Start|End |Ix|Chksm|
|
|
Start = newest log start number (Latest is 0)
|
|
End = older log end number (End - Start >= 29 (0x1d))
|
|
*/
|
|
uint8_t module = relay >> 2;
|
|
uint32_t startlog = (entries >= 29) ? entries -29 : 0;
|
|
SSPMInitSend();
|
|
SspmBuffer[16] = SSPM_FUNC_GET_LOG; // 0x1A
|
|
SspmBuffer[18] = 0x10;
|
|
memcpy(SspmBuffer +19, Sspm->module[module], SSPM_MODULE_NAME_SIZE);
|
|
SspmBuffer[31] = startlog >> 8; // MSB start log
|
|
SspmBuffer[32] = startlog; // LSB start log
|
|
SspmBuffer[33] = entries >> 8; // MSB end log
|
|
SspmBuffer[34] = entries; // LSB end log - Number of logs
|
|
Sspm->command_sequence++;
|
|
SspmBuffer[35] = Sspm->command_sequence;
|
|
|
|
SSPMSend(38);
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void SSPMHandleReceivedData(void) {
|
|
uint8_t command = SspmBuffer[16];
|
|
bool ack = (0x80 == SspmBuffer[15]);
|
|
uint8_t command_sequence = SspmBuffer[19 + Sspm->expected_bytes];
|
|
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Rcvd ack %d, cmnd %d, seq %d, size %d"),
|
|
// ack, command, command_sequence, Sspm->expected_bytes);
|
|
|
|
if (ack) {
|
|
// Responses from ARM (Acked)
|
|
switch(command) {
|
|
case SSPM_FUNC_FIND:
|
|
/* 0x00
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 01 00 00 fc 73
|
|
|Er| |St|
|
|
*/
|
|
if ((1 == Sspm->expected_bytes) && (0 == SspmBuffer[19])) {
|
|
Sspm->mstate++; // Cycle to
|
|
}
|
|
break;
|
|
case SSPM_FUNC_GET_OPS:
|
|
/* 0x04 - Overload Protection
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 04 00 02 00 00 06 98 06
|
|
Marker |Module id |Ac|Cm|Size | |Ix|Chksm|
|
|
|
|
AA 55 01 6B 7E 32 37 39 37 34 13 4B 35 36 37 80 04 00 35 00 07 00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00
|
|
00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00
|
|
00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00 07 8A 86
|
|
Marker |Module id |Ac|Cm|Size | |Ch|Ra|Max P |Min P |Max U |Min U |Max I |De|Ix|Chksm|
|
|
| | | 4400W| 0.1W| 240V| 0.1V| 20A| |
|
|
*/
|
|
if (0x02 == Sspm->expected_bytes) {
|
|
|
|
}
|
|
|
|
Sspm->module_selected--;
|
|
if (Sspm->module_selected > 0) {
|
|
SSPMSendGetModuleState(Sspm->module_selected -1);
|
|
} else {
|
|
SSPMSendGetScheme(Sspm->module_selected);
|
|
}
|
|
break;
|
|
case SSPM_FUNC_GET_MODULE_STATE:
|
|
/* 0x09
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
|
|
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 09 00 06 00 0f 01 01 01 01 05 fe 35
|
|
|OS|4RelayMasks|
|
|
*/
|
|
if (0x06 == Sspm->expected_bytes) {
|
|
// SspmBuffer[20] & 0x0F // Relays operational
|
|
power_t current_state = SspmBuffer[20] >> 4; // Relays state
|
|
power_t mask = 0x0000000F;
|
|
for (uint32_t i = 0; i < Sspm->module_max; i++) {
|
|
if ((SspmBuffer[3] == Sspm->module[i][0]) && (SspmBuffer[4] == Sspm->module[i][1])) {
|
|
current_state <<= (i * 4);
|
|
mask <<= (i * 4);
|
|
TasmotaGlobal.power &= (POWER_MASK ^ mask);
|
|
TasmotaGlobal.power |= current_state;
|
|
break;
|
|
}
|
|
}
|
|
Sspm->old_power = TasmotaGlobal.power;
|
|
TasmotaGlobal.devices_present += 4;
|
|
}
|
|
SSPMSendGetOps(Sspm->module_selected -1);
|
|
break;
|
|
case SSPM_FUNC_GET_SCHEME:
|
|
/* 0x0B
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 0b 00 02 00 00 09 bb c7
|
|
|?? ??|
|
|
*/
|
|
if (0x02 == Sspm->expected_bytes) {
|
|
|
|
}
|
|
Sspm->module_selected++;
|
|
if (Sspm->module_selected < Sspm->module_max) {
|
|
SSPMSendGetScheme(Sspm->module_selected);
|
|
} else {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Relay scan done"));
|
|
|
|
Sspm->mstate = SPM_SCAN_COMPLETE;
|
|
}
|
|
break;
|
|
case SSPM_FUNC_SET_TIME:
|
|
/* 0x0C
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 0c 00 01 00 04 3e 62
|
|
*/
|
|
TasmotaGlobal.devices_present = 0;
|
|
SSPMSendGetModuleState(Sspm->module_selected -1);
|
|
break;
|
|
case SSPM_FUNC_INIT_SCAN:
|
|
/* 0x10
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
|
|
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 80 10 00 01 00 02 e5 03
|
|
*/
|
|
break;
|
|
case SSPM_FUNC_UNITS:
|
|
/* 0x15
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 15 00 04 00 01 00 00 01 81 b1
|
|
|?? ?? ?? ??|
|
|
*/
|
|
Sspm->mstate = SPM_START_SCAN;
|
|
break;
|
|
case SSPM_FUNC_GET_ENERGY_TOTAL:
|
|
/* 0x16
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 16 01 7e 00 8b 34 32 37 39 37 34 13 4b 35 36 37
|
|
03 <- L4
|
|
07 e5 0b 0d <- End date (Today) 2021 nov 13
|
|
07 e5 05 11 <- Start date 2021 may 17
|
|
00 05 <- 0.05kWh (13/11 Today)
|
|
00 00 <- 0 (12/11 Yesterday)
|
|
00 04 <- 0.04kWh (11/11 etc)
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
42 67 46
|
|
*/
|
|
{
|
|
float energy_today = 0;
|
|
float energy_yesterday = 0;
|
|
float energy_total = 0;
|
|
uint32_t entries = (Sspm->expected_bytes - 22) / 2;
|
|
|
|
for (uint32_t i = 0; i < entries; i++) {
|
|
float today_energy = SspmBuffer[41 + (i*2)] + (float)SspmBuffer[42 + (i*2)] / 100; // x.xxkWh
|
|
if (112.30 == today_energy) { today_energy = 0; } // Unknown why sometimes 0x701E (=112.30kWh) pops up
|
|
if (0 == i) { energy_today = today_energy; }
|
|
if (1 == i) { energy_yesterday = today_energy; }
|
|
energy_total += today_energy;
|
|
}
|
|
uint32_t channel = SspmBuffer[32];
|
|
for (uint32_t module = 0; module < Sspm->module_max; module++) {
|
|
if ((SspmBuffer[20] == Sspm->module[module][0]) && (SspmBuffer[21] == Sspm->module[module][1])) {
|
|
Sspm->energy_today[module][channel] = energy_today;
|
|
Sspm->energy_yesterday[module][channel] = energy_yesterday;
|
|
Sspm->energy_total[module][channel] = energy_total; // x.xxkWh
|
|
break;
|
|
}
|
|
}
|
|
Sspm->allow_updates = 1;
|
|
}
|
|
break;
|
|
case SSPM_FUNC_GET_LOG:
|
|
/* 0x1A
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1a 01 3a 00 6b 7e 32 37 39 37 34 13 4b 35 36 37
|
|
1e Number of log entries (1e = 30)
|
|
07 e5 0b 06 0f 25 19 02 01 00 10 byte log entry
|
|
|-- trigger 00 = App, 01 = Device, 02 = Overload, 03 = Overtemp
|
|
|----- state 00 = Off, 01 = On
|
|
|-------- Channel 00 to 03
|
|
|----------- Second = 25
|
|
|-------------- Minute = 37
|
|
|----------------- Hour = 15
|
|
|-------------------- Day = 6
|
|
|----------------------- Month = 11 = November
|
|
----------------------------- Year 07 e5 = 2021
|
|
07 e5 0b 06 0f 1f 08 00 00 01
|
|
07 e5 0b 06 0f 1f 04 02 00 01
|
|
07 e5 0b 06 0f 1e 32 01 00 01
|
|
07 e5 0b 06 0f 1e 1e 01 01 01
|
|
07 e5 0b 06 0f 18 38 02 01 01
|
|
07 e5 0b 06 0f 12 38 00 01 01
|
|
07 e5 0b 06 0e 37 36 03 00 00
|
|
07 e5 0b 06 0e 37 36 01 00 00
|
|
07 e5 0b 06 0e 37 1e 03 01 00
|
|
07 e5 0b 06 0e 36 37 01 01 00
|
|
...
|
|
07 e5 0b 06 0d 30 2d 03 00 01 09 89 fe
|
|
|
|
Error:
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1A 00 01 03 E5 45 EB
|
|
| |
|
|
*/
|
|
|
|
break;
|
|
case SSPM_FUNC_ENERGY_PERIOD:
|
|
/* 0x1B
|
|
Response after start energy period
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 0e [00] 8b 34 32 37 39 37 34 13 4b 35 36 37 [03] f7 b1 bc L4
|
|
Response after refresh or stop energy period
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 11 [00] 8b 34 32 37 39 37 34 13 4b 35 36 37 [03] [00 00 00] f8 94 15 L4, kWh start period (0)
|
|
*/
|
|
|
|
break;
|
|
case SSPM_FUNC_RESET:
|
|
/* 0x1C
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1c 00 01 00 0b f9 e3
|
|
*/
|
|
// TasmotaGlobal.restart_flag = 2;
|
|
break;
|
|
}
|
|
} else {
|
|
// Initiated by ARM
|
|
switch(command) {
|
|
case SSPM_FUNC_ENERGY_RESULT:
|
|
/* 0x06
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 00 00 00 e3 5b 00 00 00 00 00 00 00 00 00 6b 1f 95 1e
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 01 00 0B 00 E4 37 00 19 0E 00 00 02 00 19 09 4B 28 1D 71
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 08 00 0A 00 E3 61 00 18 2E 00 00 00 00 18 33 4B 27 D3 0D
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 08 02 04 00 DC 14 01 C1 3D 00 10 19 01 C2 29 4B 37 6B 26
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 8b 34 32 37 39 37 34 13 4b 35 36 37 08 00 44 00 e1 35 00 9a 3e 00 01 45 00 9a 38 00 08 8b ae
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 8b 34 32 37 39 37 34 13 4b 35 36 37 08 00 4a 00 e1 22 00 61 4d 00 2c 38 00 a8 28 20 26 21 70
|
|
|Ch|Curre|Voltage |ActivePo|Reactive|Apparent|5m|
|
|
Values are XX XX - number
|
|
XX - decimals
|
|
5m - 5 minutes Power Consumption (Ws)
|
|
*/
|
|
{
|
|
uint32_t channel = 0;
|
|
for (channel = 0; channel < 4; channel++) {
|
|
if (SspmBuffer[31] & 1) { break; }
|
|
SspmBuffer[31] >>= 1;
|
|
}
|
|
for (uint32_t module = 0; module < Sspm->module_max; module++) {
|
|
if ((SspmBuffer[19] == Sspm->module[module][0]) && (SspmBuffer[20] == Sspm->module[module][1])) {
|
|
Sspm->current[module][channel] = SspmBuffer[32] + (float)SspmBuffer[33] / 100; // x.xxA
|
|
Sspm->voltage[module][channel] = (SspmBuffer[34] << 8) + SspmBuffer[35] + (float)SspmBuffer[36] / 100; // x.xxV
|
|
Sspm->active_power[module][channel] = (SspmBuffer[37] << 8) + SspmBuffer[38] + (float)SspmBuffer[39] / 100; // x.xxW
|
|
Sspm->reactive_power[module][channel] = (SspmBuffer[40] << 8) + SspmBuffer[41] + (float)SspmBuffer[42] / 100; // x.xxVAr
|
|
Sspm->apparent_power[module][channel] = (SspmBuffer[43] << 8) + SspmBuffer[44] + (float)SspmBuffer[45] / 100; // x.xxVA
|
|
float power_factor = (Sspm->active_power[module][channel] && Sspm->apparent_power[module][channel]) ? Sspm->active_power[module][channel] / Sspm->apparent_power[module][channel] : 0;
|
|
if (power_factor > 1) { power_factor = 1; }
|
|
Sspm->power_factor[module][channel] = power_factor;
|
|
break;
|
|
}
|
|
}
|
|
SSPMSendAck(command_sequence);
|
|
Sspm->allow_updates = 1;
|
|
}
|
|
break;
|
|
case SSPM_FUNC_KEY_PRESS:
|
|
/* 0x07
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 0d 6b 7e 32 37 39 37 34 13 4b 35 36 37 11 04 bf c3
|
|
|AS|
|
|
*/
|
|
if (!Sspm->no_send_key) {
|
|
power_t relay = SspmBuffer[31] & 0x0F; // Relays active
|
|
power_t relay_state = SspmBuffer[31] >> 4; // Relays state
|
|
for (uint32_t i = 0; i < Sspm->module_max; i++) {
|
|
if ((SspmBuffer[19] == Sspm->module[i][0]) && (SspmBuffer[20] == Sspm->module[i][1])) {
|
|
relay <<= (i * 4);
|
|
relay_state <<= (i * 4);
|
|
break;
|
|
}
|
|
}
|
|
for (uint32_t i = 1; i <= TasmotaGlobal.devices_present; i++) {
|
|
if (relay &1) {
|
|
ExecuteCommandPower(i, relay_state &1, SRC_BUTTON);
|
|
}
|
|
relay >>= 1;
|
|
relay_state >>= 1;
|
|
}
|
|
Sspm->old_power = TasmotaGlobal.power;
|
|
}
|
|
SSPMSendAck(command_sequence);
|
|
break;
|
|
case SSPM_FUNC_SCAN_START:
|
|
/* 0x0F
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 01 02 01 9d f8
|
|
*/
|
|
SSPMSendAck(command_sequence);
|
|
break;
|
|
case SSPM_FUNC_SCAN_RESULT:
|
|
/* 0x13
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 13 00 24 6b 7e 32 37 39 37 34 13 4b 35 36 37 04 00 00 00 82 01 00 00 14 00 00 0a 00 f0 00 00 00 0a 11 30 00 00 00 0a 02 8f cd
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 13 00 24 8b 34 32 37 39 37 34 13 4b 35 36 37 04 00 00 00 82 01 00 00 14 00 00 0a 00 f0 00 00 00 0a 11 30 00 00 00 0a 02 a0 6f
|
|
Marker | |Ac|Cm|Size |Module id |Ch| |Ty|FwVersio|Max I|Min I|Max U |Min U |Max P |Min P |Ix|Chksm|
|
|
|130| 1.0.0| 20A| 0.1A| 240V| 0.1V| 4400W| 0.1W|
|
|
Ty = Type of sub-device. 130: Four-channel sub-device
|
|
*/
|
|
if ((0x24 == Sspm->expected_bytes) && (Sspm->module_max < SSPM_MAX_MODULES)) {
|
|
memcpy(Sspm->module[1], Sspm->module[0], (SSPM_MAX_MODULES -1) * SSPM_MODULE_NAME_SIZE);
|
|
memcpy(Sspm->module[0], SspmBuffer + 19, SSPM_MODULE_NAME_SIZE);
|
|
Sspm->module_max++;
|
|
}
|
|
SSPMSendAck(command_sequence);
|
|
break;
|
|
case SSPM_FUNC_SCAN_DONE:
|
|
/* 0x19
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 19 00 00 03 a1 16
|
|
*/
|
|
SSPMSendAck(command_sequence);
|
|
Sspm->module_selected = Sspm->module_max;
|
|
SSPMSendSetTime();
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void SSPMSerialInput(void) {
|
|
/*
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 19 00 00 03 a1 16
|
|
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
|
|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 01 00 00 fc 73
|
|
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
|
|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 09 00 06 00 0f 01 01 01 01 05 f9 9d
|
|
Marker |Module id |Ac|Cm|Size |Payload |Ix|Chksm|
|
|
00 Request
|
|
80 Response (Ack)
|
|
*/
|
|
while (SspmSerial->available()) {
|
|
yield();
|
|
uint8_t serial_in_byte = SspmSerial->read();
|
|
|
|
if ((0x55 == serial_in_byte) && (0xAA == SspmBuffer[Sspm->serial_in_byte_counter -1])) {
|
|
Sspm->expected_bytes = 0;
|
|
SspmBuffer[0] = 0xAA;
|
|
Sspm->serial_in_byte_counter = 1;
|
|
}
|
|
if (Sspm->serial_in_byte_counter < SSPM_SERIAL_BUFFER_SIZE -1) {
|
|
SspmBuffer[Sspm->serial_in_byte_counter++] = serial_in_byte;
|
|
if (19 == Sspm->serial_in_byte_counter) {
|
|
Sspm->expected_bytes = (SspmBuffer[Sspm->serial_in_byte_counter -2] << 8) + SspmBuffer[Sspm->serial_in_byte_counter -1];
|
|
}
|
|
if (Sspm->serial_in_byte_counter == (22 + Sspm->expected_bytes)) {
|
|
|
|
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: ARM %*_H"), Sspm->serial_in_byte_counter, SspmBuffer);
|
|
|
|
uint16_t crc_rcvd = (SspmBuffer[Sspm->serial_in_byte_counter -2] << 8) + SspmBuffer[Sspm->serial_in_byte_counter -1];
|
|
uint16_t crc_calc = SSPMCalculateCRC(SspmBuffer, Sspm->serial_in_byte_counter -2);
|
|
if (crc_rcvd == crc_calc) {
|
|
SSPMHandleReceivedData();
|
|
} else {
|
|
Sspm->error_led_blinks = 20;
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: CRC error"));
|
|
}
|
|
Sspm->serial_in_byte_counter = 0;
|
|
Sspm->expected_bytes = 0;
|
|
}
|
|
} else {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Serial input buffer overflow"));
|
|
Sspm->serial_in_byte_counter = 0;
|
|
Sspm->expected_bytes = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void SSPMInit(void) {
|
|
if (!ValidTemplate(PSTR("Sonoff SPM (POC1)")) &&
|
|
!ValidTemplate(PSTR("Sonoff SPM (POC2)"))) { return; }
|
|
if (!PinUsed(GPIO_RXD) || !PinUsed(GPIO_TXD)) { return; }
|
|
|
|
Sspm = (TSspm*)calloc(sizeof(TSspm), 1);
|
|
if (!Sspm) { return; }
|
|
SspmBuffer = (uint8_t*)malloc(SSPM_SERIAL_BUFFER_SIZE);
|
|
if (!SspmBuffer) {
|
|
free(Sspm);
|
|
return;
|
|
}
|
|
SspmSerial = new TasmotaSerial(Pin(GPIO_RXD), Pin(GPIO_TXD), 1, 0, SSPM_SERIAL_BUFFER_SIZE);
|
|
if (!SspmSerial->begin(115200)) {
|
|
free(SspmBuffer);
|
|
free(Sspm);
|
|
return;
|
|
}
|
|
|
|
pinMode(SSPM_GPIO_ARM_RESET, OUTPUT);
|
|
digitalWrite(SSPM_GPIO_ARM_RESET, 1);
|
|
|
|
pinMode(SSPM_GPIO_LED_ERROR, OUTPUT);
|
|
digitalWrite(SSPM_GPIO_LED_ERROR, 0);
|
|
|
|
if (0 == Settings->flag2.voltage_resolution) {
|
|
Settings->flag2.voltage_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
|
|
Settings->flag2.current_resolution = 2; // SPM has 2 decimals
|
|
Settings->flag2.wattage_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
|
|
Settings->flag2.energy_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
|
|
}
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#ifdef USE_ETHERNET
|
|
Settings->eth_address = 0; // EthAddress
|
|
Settings->eth_type = ETH_PHY_LAN8720; // EthType
|
|
Settings->eth_clk_mode = ETH_CLOCK_GPIO17_OUT; // EthClockMode
|
|
#endif
|
|
#endif
|
|
|
|
Sspm->old_power = TasmotaGlobal.power;
|
|
Sspm->mstate = SPM_WAIT; // Start init sequence
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void SSPMEvery100ms(void) {
|
|
Sspm->last_totals++;
|
|
|
|
if (Sspm->no_send_key) { Sspm->no_send_key--; }
|
|
|
|
if (Sspm->timeout) {
|
|
Sspm->timeout--;
|
|
if (!Sspm->timeout) {
|
|
Sspm->allow_updates = 1;
|
|
}
|
|
}
|
|
|
|
if (Sspm->error_led_blinks) {
|
|
uint32_t state = 1; // Stay lit
|
|
if (Sspm->error_led_blinks < 255) {
|
|
Sspm->error_led_blinks--;
|
|
state = Sspm->error_led_blinks >> 1 &1; // Blink every 0.4s
|
|
}
|
|
digitalWrite(SSPM_GPIO_LED_ERROR, state);
|
|
}
|
|
|
|
// Fix race condition if the ARM doesn't respond
|
|
if ((Sspm->mstate > SPM_NONE) && (Sspm->mstate < SPM_SEND_FUNC_UNITS)) {
|
|
Sspm->counter++;
|
|
if (Sspm->counter > 20) {
|
|
Sspm->mstate = SPM_NONE;
|
|
Sspm->error_led_blinks = 255;
|
|
}
|
|
}
|
|
switch (Sspm->mstate) {
|
|
case SPM_NONE:
|
|
return;
|
|
case SPM_WAIT:
|
|
// 100ms wait
|
|
Sspm->mstate = SPM_RESET;
|
|
break;
|
|
case SPM_RESET:
|
|
// Reset ARM
|
|
digitalWrite(SSPM_GPIO_ARM_RESET, 0);
|
|
delay(18);
|
|
digitalWrite(SSPM_GPIO_ARM_RESET, 1);
|
|
delay(18);
|
|
Sspm->mstate = SPM_POLL_ARM;
|
|
case SPM_POLL_ARM:
|
|
// Wait for first acknowledge from ARM after reset
|
|
SSPMSendCmnd(SSPM_FUNC_FIND);
|
|
break;
|
|
case SPM_POLL_ARM_2:
|
|
// Wait for second acknowledge from ARM after reset
|
|
SSPMSendCmnd(SSPM_FUNC_FIND);
|
|
break;
|
|
case SPM_SEND_FUNC_UNITS:
|
|
// Get number of units
|
|
SSPMSendCmnd(SSPM_FUNC_UNITS);
|
|
break;
|
|
case SPM_START_SCAN:
|
|
// Start scan module sequence
|
|
Sspm->module_max = 0;
|
|
SSPMSendInitScan();
|
|
Sspm->mstate = SPM_WAIT_FOR_SCAN;
|
|
break;
|
|
case SPM_WAIT_FOR_SCAN:
|
|
// Wait for scan sequence to complete
|
|
break;
|
|
case SPM_SCAN_COMPLETE:
|
|
// Scan sequence finished
|
|
TasmotaGlobal.discovery_counter = 1; // Force TasDiscovery()
|
|
Sspm->get_energy_relay = 0;
|
|
Sspm->allow_updates = 1; // Enable requests from 100mSec loop
|
|
Sspm->mstate = SPM_GET_ENERGY_TOTALS;
|
|
break;
|
|
case SPM_GET_ENERGY_TOTALS:
|
|
// Retrieve Energy total status from up to 128 relays
|
|
if (Sspm->allow_updates) {
|
|
SSPMSetLock(4);
|
|
SSPMSendGetEnergyTotal(Sspm->get_energy_relay);
|
|
Sspm->get_energy_relay++;
|
|
if (Sspm->get_energy_relay >= TasmotaGlobal.devices_present) {
|
|
Sspm->get_energy_relay = TasmotaGlobal.devices_present;
|
|
Sspm->mstate = SPM_UPDATE_CHANNELS;
|
|
}
|
|
}
|
|
break;
|
|
case SPM_UPDATE_CHANNELS:
|
|
// Retrieve Energy status from up to 128 powered on relays (takes 128 * 2s!!)
|
|
if (Sspm->allow_updates) {
|
|
Sspm->get_energy_relay++;
|
|
if (Sspm->get_energy_relay >= TasmotaGlobal.devices_present) {
|
|
Sspm->get_energy_relay = 0;
|
|
if (Sspm->last_totals > 1200) { // Get totals every 2 minutes (takes 128 * 0.2s)
|
|
Sspm->last_totals = 0;
|
|
Sspm->get_totals = 1;
|
|
} else {
|
|
Sspm->get_totals = 0;
|
|
}
|
|
}
|
|
power_t powered_on = TasmotaGlobal.power >> Sspm->get_energy_relay;
|
|
if (powered_on &1) {
|
|
SSPMSetLock(4);
|
|
if (Sspm->get_totals) {
|
|
SSPMSendGetEnergyTotal(Sspm->get_energy_relay);
|
|
} else {
|
|
SSPMSendGetEnergy(Sspm->get_energy_relay);
|
|
}
|
|
} else {
|
|
uint32_t module = Sspm->get_energy_relay >> 2;
|
|
uint32_t channel = Sspm->get_energy_relay &3;
|
|
if (Sspm->voltage[module][channel]) {
|
|
Sspm->voltage[module][channel] = 0;
|
|
Sspm->current[module][channel] = 0;
|
|
Sspm->active_power[module][channel] = 0;
|
|
Sspm->apparent_power[module][channel] = 0;
|
|
Sspm->reactive_power[module][channel] = 0;
|
|
Sspm->power_factor[module][channel] = 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
bool SSPMSetDevicePower(void) {
|
|
power_t new_power = XdrvMailbox.index;
|
|
if (new_power != Sspm->old_power) {
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
uint8_t new_state = (new_power >> i) &1;
|
|
if (new_state != ((Sspm->old_power >> i) &1)) {
|
|
SSPMSendSetRelay(i, new_state);
|
|
Sspm->no_send_key = 10; // Disable buttons for 10 * 0.1 second
|
|
}
|
|
}
|
|
Sspm->old_power = new_power;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
bool SSPMButton(void) {
|
|
bool result = false;
|
|
uint32_t button = XdrvMailbox.payload;
|
|
if ((PRESSED == button) && (NOT_PRESSED == Sspm->last_button)) { // Button pressed
|
|
Sspm->mstate = SPM_START_SCAN;
|
|
result = true; // Disable further button processing
|
|
}
|
|
Sspm->last_button = button;
|
|
return result;
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
const uint16_t SSPM_SIZE = 128;
|
|
|
|
char* SSPMEnergyFormat(char* result, float* input, uint32_t resolution, uint8_t* indirect, uint8_t offset, uint32_t count) {
|
|
result[0] = '\0';
|
|
for (uint32_t i = 0; i < count; i++) {
|
|
ext_snprintf_P(result, SSPM_SIZE, PSTR("%s<td>%*_f</td>"), result, resolution, &input[indirect[offset +i]]);
|
|
}
|
|
ext_snprintf_P(result, SSPM_SIZE, PSTR("%s<td style='white-space:nowrap'>"), result);
|
|
return result;
|
|
}
|
|
|
|
const char HTTP_SSPM_VOLTAGE[] PROGMEM =
|
|
"{s}" D_VOLTAGE "</th>%s" D_UNIT_VOLT "{e}"; // {s} = <tr><th>, {m} = </th><td style='width:20px;white-space:nowrap'>, {e} = </td></tr>
|
|
const char HTTP_SSPM_CURRENT[] PROGMEM =
|
|
"{s}" D_CURRENT "</th>%s" D_UNIT_AMPERE "{e}";
|
|
const char HTTP_SSPM_POWER[] PROGMEM =
|
|
"{s}" D_POWERUSAGE_ACTIVE "</th>%s" D_UNIT_WATT "{e}";
|
|
const char HTTP_SSPM_POWER2[] PROGMEM =
|
|
"{s}" D_POWERUSAGE_APPARENT "</th>%s" D_UNIT_VA "{e}"
|
|
"{s}" D_POWERUSAGE_REACTIVE "</th>%s" D_UNIT_VAR "{e}"
|
|
"{s}" D_POWER_FACTOR "</th>%s{e}";
|
|
const char HTTP_SSPM_ENERGY[] PROGMEM =
|
|
"{s}" D_ENERGY_TODAY "</th>%s" D_UNIT_KILOWATTHOUR "{e}"
|
|
"{s}" D_ENERGY_YESTERDAY "</th>%s" D_UNIT_KILOWATTHOUR "{e}"
|
|
"{s}" D_ENERGY_TOTAL "</th>%s" D_UNIT_KILOWATTHOUR "{e}";
|
|
|
|
void SSPMEnergyShow(bool json) {
|
|
if (!TasmotaGlobal.devices_present) { return; } // Not ready yet
|
|
|
|
if (json) {
|
|
ResponseAppend_P(PSTR(",\"SPM\":{\"" D_JSON_ENERGY "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->energy_total[i >>2][i &3]);
|
|
}
|
|
#ifdef SSPM_JSON_ENERGY_YESTERDAY
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_YESTERDAY "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->energy_yesterday[i >>2][i &3]);
|
|
}
|
|
#endif
|
|
#ifdef SSPM_JSON_ENERGY_TODAY
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_TODAY "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->energy_today[i >>2][i &3]);
|
|
}
|
|
#endif
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_ACTIVE_POWERUSAGE "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->active_power[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_APPARENT_POWERUSAGE "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->apparent_power[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_REACTIVE_POWERUSAGE "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->reactive_power[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_POWERFACTOR "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", 2, &Sspm->power_factor[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_VOLTAGE "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.voltage_resolution, &Sspm->voltage[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("],\"" D_JSON_CURRENT "\":["));
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.current_resolution, &Sspm->current[i >>2][i &3]);
|
|
}
|
|
ResponseAppend_P(PSTR("]}"));
|
|
} else {
|
|
uint8_t relay[SSPM_MAX_MODULES * 4];
|
|
uint8_t indirect[SSPM_MAX_MODULES * 4];
|
|
|
|
uint32_t index = 0;
|
|
power_t power = TasmotaGlobal.power;
|
|
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
|
|
if ((0 == Settings->sbflag1.sspm_display) ||
|
|
((1 == Settings->sbflag1.sspm_display) && (power >> i) &1)) {
|
|
relay[index] = i +1;
|
|
indirect[index] = i;
|
|
index++;
|
|
}
|
|
}
|
|
|
|
if (index) {
|
|
uint32_t offset = 0;
|
|
if (index > 4) {
|
|
Sspm->rotate++;
|
|
if (Sspm->rotate >= ((index -1) >> 2) << 3) {
|
|
Sspm->rotate = 0;
|
|
}
|
|
offset = (Sspm->rotate >> 2) * 4;
|
|
}
|
|
uint32_t count = index - offset;
|
|
if (count > 4) { count = 4; }
|
|
WSContentSend_P(PSTR("</table>{t}{s}")); // First column is empty ({t} = <table style='width:100%'>, {s} = <tr><th>)
|
|
for (uint32_t i = 0; i < count; i++) {
|
|
WSContentSend_P(PSTR("</th><th style='width:60px;white-space:nowrap'>L%d"), relay[offset +i]);
|
|
}
|
|
WSContentSend_P(PSTR("</th><td>{e}")); // Last column is units ({e} = </td></tr>)
|
|
char value_chr[SSPM_SIZE];
|
|
WSContentSend_PD(HTTP_SSPM_VOLTAGE, SSPMEnergyFormat(value_chr, Sspm->voltage[0], Settings->flag2.voltage_resolution, indirect, offset, count));
|
|
WSContentSend_PD(HTTP_SSPM_CURRENT, SSPMEnergyFormat(value_chr, Sspm->current[0], Settings->flag2.current_resolution, indirect, offset, count));
|
|
WSContentSend_PD(HTTP_SSPM_POWER, SSPMEnergyFormat(value_chr, Sspm->active_power[0], Settings->flag2.wattage_resolution, indirect, offset, count));
|
|
char valu2_chr[SSPM_SIZE];
|
|
char valu3_chr[SSPM_SIZE];
|
|
WSContentSend_PD(HTTP_SSPM_POWER2, SSPMEnergyFormat(value_chr, Sspm->apparent_power[0], Settings->flag2.wattage_resolution, indirect, offset, count),
|
|
SSPMEnergyFormat(valu2_chr, Sspm->reactive_power[0], Settings->flag2.wattage_resolution, indirect, offset, count),
|
|
SSPMEnergyFormat(valu3_chr, Sspm->power_factor[0], 2, indirect, offset, count));
|
|
WSContentSend_PD(HTTP_SSPM_ENERGY, SSPMEnergyFormat(value_chr, Sspm->energy_today[0], Settings->flag2.energy_resolution, indirect, offset, count),
|
|
SSPMEnergyFormat(valu2_chr, Sspm->energy_yesterday[0], Settings->flag2.energy_resolution, indirect, offset, count),
|
|
SSPMEnergyFormat(valu3_chr, Sspm->energy_total[0], Settings->flag2.energy_resolution, indirect, offset, count));
|
|
WSContentSend_P(PSTR("</table>{t}")); // {t} = <table style='width:100%'> - Define for next FUNC_WEB_SENSOR
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Commands
|
|
\*********************************************************************************************/
|
|
|
|
const char kSSPMCommands[] PROGMEM = "SSPM|" // Prefix
|
|
"Log|Energy|History|Scan|IamHere|Display|Reset" ;
|
|
|
|
void (* const SSPMCommand[])(void) PROGMEM = {
|
|
&CmndSSPMLog, &CmndSSPMEnergy, &CmndSSPMEnergyHistory, &CmndSSPMScan, &CmndSSPMIamHere, &CmndSSPMDisplay, &CmndSSPMReset };
|
|
|
|
void CmndSSPMLog(void) {
|
|
// Report 29 log entries
|
|
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
|
|
XdrvMailbox.payload &= 0xFFFF; // Max 65000 entries
|
|
SSPMSendGetLog(XdrvMailbox.index -1, XdrvMailbox.payload +1);
|
|
ResponseCmndDone();
|
|
}
|
|
|
|
void CmndSSPMEnergy(void) {
|
|
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
|
|
SSPMSendGetEnergy(XdrvMailbox.index -1);
|
|
ResponseCmndDone();
|
|
}
|
|
|
|
void CmndSSPMEnergyHistory(void) {
|
|
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
|
|
SSPMSendGetEnergyTotal(XdrvMailbox.index -1);
|
|
ResponseCmndDone();
|
|
}
|
|
|
|
void CmndSSPMScan(void) {
|
|
// Start relay module scan taking up to 20 seconds
|
|
Sspm->mstate = SPM_START_SCAN;
|
|
ResponseCmndChar(PSTR(D_JSON_STARTED));
|
|
}
|
|
|
|
void CmndSSPMIamHere(void) {
|
|
// Blink module ERROR led containing relay
|
|
if ((XdrvMailbox.payload < 1) || (XdrvMailbox.payload > TasmotaGlobal.devices_present)) { XdrvMailbox.payload = 1; }
|
|
SSPMSendIAmHere(XdrvMailbox.payload -1);
|
|
ResponseCmndDone();
|
|
}
|
|
|
|
void CmndSSPMDisplay(void) {
|
|
// Select either all relays or only powered on relays
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
|
|
Settings->sbflag1.sspm_display = XdrvMailbox.payload;
|
|
}
|
|
ResponseCmndNumber(Settings->sbflag1.sspm_display);
|
|
}
|
|
|
|
void CmndSSPMReset(void) {
|
|
// Reset ARM and restart
|
|
if (1 == XdrvMailbox.payload) {
|
|
Sspm->mstate = SPM_NONE;
|
|
SSPMSendCmnd(SSPM_FUNC_RESET);
|
|
TasmotaGlobal.restart_flag = 3;
|
|
ResponseCmndChar(PSTR(D_JSON_RESET_AND_RESTARTING));
|
|
} else {
|
|
ResponseCmndChar(PSTR(D_JSON_ONE_TO_RESET));
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xdrv86(uint8_t function) {
|
|
bool result = false;
|
|
|
|
if (FUNC_INIT == function) {
|
|
SSPMInit();
|
|
}
|
|
else if (Sspm) {
|
|
switch (function) {
|
|
case FUNC_LOOP:
|
|
if (SspmSerial) { SSPMSerialInput(); }
|
|
break;
|
|
case FUNC_EVERY_100_MSECOND:
|
|
SSPMEvery100ms();
|
|
break;
|
|
case FUNC_SET_DEVICE_POWER:
|
|
result = SSPMSetDevicePower();
|
|
break;
|
|
case FUNC_JSON_APPEND:
|
|
SSPMEnergyShow(true);
|
|
break;
|
|
#ifdef USE_WEBSERVER
|
|
case FUNC_WEB_SENSOR:
|
|
SSPMEnergyShow(false);
|
|
break;
|
|
#endif // USE_WEBSERVER
|
|
case FUNC_COMMAND:
|
|
result = DecodeCommand(kSSPMCommands, SSPMCommand);
|
|
break;
|
|
case FUNC_BUTTON_PRESSED:
|
|
result = SSPMButton();
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_SONOFF_SPM
|
|
#endif // ESP32
|