mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Mirror of arendst/Tasmota@github.com - Open-source firmware for ESP8266/8285/32-based smart home products
94 Commits 10 Branches 111 Tags 1.1 GiB
C 59.8%
C++ 36.5%
Berry 2.2%
Python 0.8%
Jupyter Notebook 0.3%
Other 0.3%
Go to file
arendst 77da1dfdc1 v5.0.3 
5.0.3 20170504
* Add command SensorRetain on|off to enable retaining of mqtt message
tele/sonoff/SENSOR (#74)
* Change WifiConfig timeout from 60 seconds to 180 seconds (#212)
* Change Sonoff Touch command Ledstate functionality by turning led on
if power is off (#214)
* Add 4 seconds delay after power on before enabling button to
workaround Wemos D1 mini RTS circuit (#380)
 		2017-05-04 13:58:26 +02:00
api v5.0.3 2017-05-04 13:58:26 +02:00
arduino Add 1M flash with no spiffs linker script 2017-04-25 18:16:40 +02:00
lib Update library for HVAC 2017-04-03 15:07:49 +02:00
sonoff v5.0.3 2017-05-04 13:58:26 +02:00
.gitattributes Add linefeed normalisation 2017-03-07 09:36:01 +01:00
.gitignore Update platformio info 2017-01-28 16:44:00 +01:00
.travis.yml update travis 2017-01-28 18:58:55 +01:00
README.md v5.0.3 2017-05-04 13:58:26 +02:00
esp8266.flash.1m0.ld Add 1M flash with no spiffs linker script 2017-04-25 18:16:40 +02:00
platformio.ini Add 1M flash with no spiffs linker script 2017-04-25 18:16:40 +02:00

README.md

Sonoff-Tasmota

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.

Current version is 5.0.3 - See sonoff/_releasenotes.ino for change information.

**** ATTENTION Version 5.0.x specific information ****

This version uses a new linker script to free flash memory for future code additions. It moves the settings from Spiffs to Eeprom. If you compile your own firmware download the new linker to your IDE or Platformio base folder. See Wiki > Prerequisite.

Best practice to implement is:

  • Open the webpage to your device
  • Perform option Backup Configuration
  • Upgrade new firmware using Firmware upgrade
  • If configuration conversion fails keep the webpage open and perform Restore Configuration

You should now have a device with 32k more code memory to play with.

*********************************************************

  • This version provides all (Sonoff) modules in one file and starts up with Sonoff Basic.
  • Once uploaded select module using the configuration webpage or the commands Modules and Module.
  • After reboot select config menu again or use commands GPIOs and GPIO to change GPIO with desired sensor.

See Wiki for more information.
See Community for forum and more user experience.

The following devices are supported: