mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_configurations_ESP32.h

362 lines
26 KiB
C
Raw Blame History

/*
tasmota_configurations_ESP32.h - ESP32 only Configurations for Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _TASMOTA_CONFIGURATIONS_ESP32_H_
#define _TASMOTA_CONFIGURATIONS_ESP32_H_
#ifdef ESP32
/*********************************************************************************************\
* [tasmota32-webcam.bin]
* Provide an image with useful supported sensors enabled
\*********************************************************************************************/
#ifdef FIRMWARE_WEBCAM
#undef CODE_IMAGE_STR
#define CODE_IMAGE_STR "webcam"
#define USE_WEBCAM
#define USE_UFILESYS
#define USE_SDCARD
#define GUI_TRASH_FILE
#define USE_SPI
#undef USE_BERRY // Disable Berry scripting language
#undef USE_MI_ESP32 // (ESP32 only) Disable support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
#endif // FIRMWARE_WEBCAM
/*********************************************************************************************\
* [tasmota32-odroidgo.bin]
* Provide an image with useful supported sensors enabled for Odroid Go
\*********************************************************************************************/
#ifdef FIRMWARE_ODROID_GO
#undef CODE_IMAGE_STR
#define CODE_IMAGE_STR "odroid-go"
#undef MODULE
#define MODULE ODROID_GO // [Module] Select default module from tasmota_template.h
#undef FALLBACK_MODULE
#define FALLBACK_MODULE ODROID_GO // [Module2] Select default module on fast reboot where USER_MODULE is user template
#define USE_ODROID_GO // Add support for Odroid Go
#define USE_UFILESYS
#define USE_SDCARD
#define GUI_TRASH_FILE
#define GUI_EDIT_FILE
#ifdef USE_BERRY // Berry scripting language
#define USE_BERRY_PSRAM // Allocate Berry memory in PSRAM if PSRAM is connected - this might be slightly slower but leaves main memory intact
#endif
#define USE_ADC
#define USE_SPI
#define USE_DISPLAY // Add SPI Display Support (+2k code)
#ifndef USE_UNIVERSAL_DISPLAY
#define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
#endif
//#define USE_BLE_ESP32 // Enable new BLE driver
//#define USE_MI_ESP32 // (ESP32 only) Add support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
#endif // FIRMWARE_ODROID_GO
/*********************************************************************************************\
* [tasmota32-core2.bin]
* Provide an image with useful supported sensors enabled for M5stack core2
\*********************************************************************************************/
#ifdef FIRMWARE_M5STACK_CORE2
#undef CODE_IMAGE_STR
#define CODE_IMAGE_STR "core2"
#undef MODULE
#define MODULE M5STACK_CORE2 // [Module] Select default module from tasmota_template.h
#undef FALLBACK_MODULE
#define FALLBACK_MODULE M5STACK_CORE2 // [Module2] Select default module on fast reboot where USER_MODULE is user template
#define USE_M5STACK_CORE2 // Add support for M5Stack Core2
#define USE_I2S_SAY_TIME
#define USE_I2S_WEBRADIO
#define USE_UFILESYS
#define USE_SDCARD
#define GUI_TRASH_FILE
#define GUI_EDIT_FILE
#ifdef USE_BERRY // Berry scripting language
#define USE_BERRY_PSRAM // Allocate Berry memory in PSRAM if PSRAM is connected - this might be slightly slower but leaves main memory intact
#endif
#define USE_I2C
#define USE_BMA423
#define USE_MPU6886
#define USE_SPI
#define USE_DISPLAY
#ifdef USE_UNIVERSAL_DISPLAY
#define USE_LVGL
// #define USE_DISPLAY_LVGL_ONLY
#else
#define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
#define USE_DISPLAY_MODES1TO5
#define USE_TOUCH_BUTTONS
#endif
#define JPEG_PICTS
#define USE_FT5206
#define USE_SENDMAIL
#define USE_ESP32MAIL
#define USE_SCRIPT // Add support for script (+17k code)
// Script related defines
#ifdef USE_SCRIPT
#undef USE_RULES
#define MAXVARS 75
#define MAXSVARS 15
#define MAXFILT 10
#define UFSYS_SIZE 8192
#define USE_SCRIPT_TASK
#define LARGE_ARRAYS
#define SCRIPT_LARGE_VNBUFF
#define USE_SCRIPT_GLOBVARS
#define USE_SCRIPT_SUB_COMMAND
#define USE_ANGLE_FUNC
#define USE_SCRIPT_WEB_DISPLAY
#define SCRIPT_FULL_WEBPAGE
#define SCRIPT_GET_HTTPS_JP
#define USE_GOOGLE_CHARTS
#endif // USE_SCRIPT
#endif // FIRMWARE_M5STACK_CORE2
/*********************************************************************************************\
* [tasmota32-bluetooth.bin]
* Provide an image with BLE support
\*********************************************************************************************/
#ifdef FIRMWARE_BLUETOOTH
#undef CODE_IMAGE_STR
#define CODE_IMAGE_STR "bluetooth"
#undef MODULE
#define MODULE WEMOS // [Module] Select default module from tasmota_template.h
#undef FALLBACK_MODULE
#define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
#define USE_UFILESYS
#define USE_SDCARD
#define GUI_TRASH_FILE
#define GUI_EDIT_FILE
#define USE_ADC
#undef USE_BERRY // Disable Berry scripting language
#define USE_BLE_ESP32 // Enable new BLE driver
#define USE_MI_ESP32 // (ESP32 only) Add support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
#endif // FIRMWARE_BLUETOOTH
/*********************************************************************************************\
* [tasmota32.bin]
* Provide an image which includes KNX and Sensors
\*********************************************************************************************/
#ifdef FIRMWARE_TASMOTA32
#define USE_ENHANCED_GUI_WIFI_SCAN
#define USE_UFILESYS
#define USE_SDCARD
#define GUI_TRASH_FILE
#define GUI_EDIT_FILE
#define ROTARY_V1 // Add support for Rotary Encoder as used in MI Desk Lamp
#define USE_TUYA_MCU // Add support for Tuya Serial MCU
#ifndef TUYA_DIMMER_ID
#define TUYA_DIMMER_ID 0 // Default dimmer Id
#endif
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
//#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer (+2k code)
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
//#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
//#define USE_HOTPLUG // Add support for sensor HotPlug
//#undef USE_DEVICE_GROUPS // Disable support for device groups (+5k6 code)
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
#define USE_LIGHT_PALETTE // Add support for color palette (+0k9 code)
#define USE_DS18x20 // Add support for DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
#define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
#define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
#define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
#define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
#define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
#define USE_VEML6070 // [I2cDriver12] Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
//#define USE_VEML6075 // [I2cDriver49] Enable VEML6075 UVA/UVB/UVINDEX Sensor (I2C address 0x10) (+2k1 code)
//#define USE_VEML7700 // [I2cDriver50] Enable VEML7700 Ambient Light sensor (I2C addresses 0x10) (+4k5 code)
#define USE_ADS1115 // [I2cDriver13] Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
#define USE_INA219 // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
//#define USE_INA226 // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
#define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
//#define USE_TSL2561 // [I2cDriver16] Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
//#define USE_TSL2591 // [I2cDriver40] Enable TSL2591 sensor (I2C address 0x29) using library Adafruit_TSL2591 (+1k6 code)
#define USE_MGS // [I2cDriver17] Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
#define USE_SGP30 // [I2cDriver18] Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
//#define USE_SI1145 // [I2cDriver19] Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
#define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
//#define USE_APDS9960 // [I2cDriver21] Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
//#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
#define USE_MPU6886 // [I2cDriver??] Enable MPU6886 6-axis MotionTracking sensor (I2C address 0x68)
//#define USE_MPU6050 // [I2cDriver25] Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+3K3 of code and 188 Bytes of RAM)
//#define USE_DS3231 // [I2cDriver26] Enable DS3231 external RTC in case no Wifi is avaliable. See docs in the source file (+1k2 code)
//#define USE_MGC3130 // [I2cDriver27] Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
//#define USE_MAX44009 // [I2cDriver28] Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
#define USE_SCD30 // [I2cDriver29] Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
//#define USE_SPS30 // [I2cDriver30] Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
#define USE_ADE7953 // [I2cDriver7] Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
#define USE_VL53L0X // [I2cDriver31] Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
//#define USE_VL53L1X // [I2cDriver54] Enable VL53L1X time of flight sensor (I2C address 0x29) using Pololu VL53L1X library (+2k9 code)
//#define USE_TOF10120 // [I2cDriver57] Enable TOF10120 time of flight sensor (I2C address 0x52) (+0k6 code)
//#define USE_MLX90614 // [I2cDriver32] Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
//#define USE_CHIRP // [I2cDriver33] Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
//#define USE_PAJ7620 // [I2cDriver34] Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
//#define USE_PCF8574 // [I2cDriver2] Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
#define USE_HIH6 // [I2cDriver36] Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
#define USE_DHT12 // [I2cDriver41] Enable DHT12 humidity and temperature sensor (I2C address 0x5C) (+0k7 code)
#define USE_DS1624 // [I2cDriver42] Enable DS1624, DS1621 temperature sensor (I2C addresses 0x48 - 0x4F) (+1k2 code)
//#define USE_AHT1x // [I2cDriver43] Enable AHT10/15 humidity and temperature sensor (I2C address 0x38, 0x39) (+0k8 code)
// #define USE_AHT2x // [I2cDriver43] Enable AHT20 instead of AHT1x humidity and temperature sensor (I2C address 0x38) (+0k8 code)
#define USE_WEMOS_MOTOR_V1 // [I2cDriver44] Enable Wemos motor driver V1 (I2C addresses 0x2D - 0x30) (+0k7 code)
#define WEMOS_MOTOR_V1_ADDR 0x30 // Default I2C address 0x30
#define WEMOS_MOTOR_V1_FREQ 1000 // Default frequency
//#define USE_HDC1080 // [I2cDriver45] Enable HDC1080 temperature/humidity sensor (I2C address 0x40) (+1k5 code)
#define USE_IAQ // [I2cDriver46] Enable iAQ-core air quality sensor (I2C address 0x5a) (+0k6 code)
#define USE_AS3935 // [I2cDriver48] Enable AS3935 Franklin Lightning Sensor (I2C address 0x03) (+5k4 code)
//#define USE_MCP9808 // [I2cDriver51] Enable MCP9808 temperature sensor (I2C addresses 0x18 - 0x1F) (+0k9 code)
//#define USE_HP303B // [I2cDriver52] Enable HP303B temperature and pressure sensor (I2C address 0x76 or 0x77) (+6k2 code)
//#define USE_MLX90640 // [I2cDriver53] Enable MLX90640 IR array temperature sensor (I2C address 0x33) (+20k code)
//#define USE_EZOPH // [I2cDriver55] Enable support for EZO's pH sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOORP // [I2cDriver55] Enable support for EZO's ORP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZORTD // [I2cDriver55] Enable support for EZO's RTD sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOHUM // [I2cDriver55] Enable support for EZO's HUM sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOEC // [I2cDriver55] Enable support for EZO's EC sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOCO2 // [I2cDriver55] Enable support for EZO's CO2 sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOO2 // [I2cDriver55] Enable support for EZO's O2 sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOPRS // [I2cDriver55] Enable support for EZO's PRS sensor (+0k7 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOFLO // [I2cDriver55] Enable support for EZO's FLO sensor (+0k4 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZODO // [I2cDriver55] Enable support for EZO's DO sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZORGB // [I2cDriver55] Enable support for EZO's RGB sensor (+0k5 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_EZOPMP // [I2cDriver55] Enable support for EZO's PMP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
//#define USE_SEESAW_SOIL // [I2cDriver56] Enable Capacitice Soil Moisture & Temperature Sensor (I2C addresses 0x36 - 0x39) (+1k3 code)
//#define USE_SPI // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
//#define USE_RC522 // Add support for MFRC522 13.56Mhz Rfid reader (+6k code)
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
#ifndef CO2_LOW
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
#endif
#ifndef CO2_HIGH
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
#endif
#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
//#define PMS_MODEL_PMS3003 // Enable support of PMS3003 instead of PMS5003/PMS7003 (needs the USE_PMS5003 above)
#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
#define USE_HPMA // Add support for Honeywell HPMA115S0 particle concentration sensor
#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
//#define USE_DYP // Add support for DYP ME-007 ultrasonic distance sensor, serial port version (+0k5 code)
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
#define USE_MP3_PLAYER // Use of the DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
#define MP3_VOLUME 10 // Set the startup volume on init, the range can be 0..30(max)
//#define USE_AZ7798 // Add support for AZ-Instrument 7798 CO2 datalogger
#define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
//#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
#define USE_RDM6300 // Add support for RDM6300 125kHz RFID Reader (+0k8)
#define USE_IBEACON // Add support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
//#define USE_GPS // Add support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
//#define USE_BLE_ESP32 // (ESP32 only) Add support for native BLE on ESP32 - use new driver
//#define USE_MI_ESP32 // (ESP32 only) Add support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
#define USE_HRXL // Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders (+0k7)
//#define USE_TASMOTA_CLIENT // Add support for Arduino Uno/Pro Mini via serial interface including flashing (+2k3 code, 44 mem)
//#define USE_OPENTHERM // Add support for OpenTherm (+15k code)
//#define USE_MIEL_HVAC // Add support for Mitsubishi Electric HVAC serial interface (+5k code)
//#define USE_PROJECTOR_CTRL // Add support for LCD/DLP Projector serial control interface (+2k code)
// #define USE_PROJECTOR_CTRL_NEC // Use codes for NEC
// #define USE_PROJECTOR_CTRL_OPTOMA // Use codes for OPTOMA
//#define USE_AS608 // Add support for AS608 optical and R503 capacitive fingerprint sensor (+3k4 code)
//#define USE_TFMINIPLUS // Add support for TFmini Plus (TFmini, TFmini-S) LiDAR modules via UART interface
#define USE_ENERGY_SENSOR // Add energy sensors (-14k code)
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
#define USE_PZEM_AC // Add support for PZEM014,016 Energy monitor (+1k1 code)
#define USE_PZEM_DC // Add support for PZEM003,017 Energy monitor (+1k1 code)
#define USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
#define USE_SDM72 // Add support for Eastron SDM72-Modbus energy monitor (+0k3 code)
#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy monitor (+1k1 code)
#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy monitor (+0k6 code)
#define USE_DDS2382 // Add support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
#define USE_DDSU666 // Add support for Chint DDSU666 Modbus energy monitor (+0k6 code)
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k1 code)
//#define USE_LE01MR // Add support for F&F LE-01MR modbus energy meter (+2k code)
//#define USE_TELEINFO // Add support for French Energy Provider metering telemetry (+5k2 code, +168 RAM + SmartMeter LinkedList Values RAM)
//#define USE_WE517 // Add support for Orno WE517-Modbus energy monitor (+1k code)
#define USE_DHT // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
#define USE_MAX31855 // Add support for MAX31855 K-Type thermocouple sensor using softSPI
//#define USE_MAX31865 // Add support for MAX31865 RTD sensors using softSPI
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
#define USE_LMT01 // Add support for TI LMT01 temperature sensor, count pulses on single GPIO (+0k5 code)
//#define USE_WIEGAND // Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) (+1k7 code)
#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
#define USE_HX711 // Add support for HX711 load cell (+1k5 code)
//#define USE_HX711_GUI // Add optional web GUI to HX711 as scale (+1k8 code)
//#define USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k6/0k8 code)
//#define USE_TX23_WIND_SENSOR // Add support for La Crosse TX23 anemometer (+2k7/1k code)
//#define USE_WINDMETER // Add support for analog anemometer (+2k2 code)
#define USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
#define USE_RF_SENSOR // Add support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
// #define USE_THEO_V2 // Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver (+1k4 code)
#define USE_ALECTO_V2 // Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver (+1k7 code)
#define USE_HRE // Add support for Badger HR-E Water Meter (+1k4 code)
//#define USE_A4988_STEPPER // Add support for A4988/DRV8825 stepper-motor-driver-circuit (+10k5 code)
//#define USE_THERMOSTAT // Add support for Thermostat
#ifndef USE_KNX
#define USE_KNX // Enable KNX IP Protocol Support (+23k code, +3k3 mem)
#endif
#endif // FIRMWARE_TASMOTA32
#endif // ESP32
#endif // _TASMOTA_CONFIGURATIONS_ESP32_H_
Reference in New Issue View Git Blame Copy Permalink