mirror of https://github.com/arendst/Tasmota.git
274 lines
16 KiB
C
274 lines
16 KiB
C
/*
|
|
sonoff.h - Master header file for Sonoff-Tasmota
|
|
|
|
Copyright (C) 2019 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _SONOFF_H_
|
|
#define _SONOFF_H_
|
|
|
|
/*********************************************************************************************\
|
|
* Performance ROM (PROGMEM) vs RAM (RODATA)
|
|
\*********************************************************************************************/
|
|
|
|
//#define XFUNC_PTR_IN_ROM // Enable for keeping tables in ROM (PROGMEM) which seem to have access issues on some flash types
|
|
|
|
/*********************************************************************************************\
|
|
* Default sensor states
|
|
\*********************************************************************************************/
|
|
|
|
#define CODE_IMAGE 0
|
|
|
|
#define USE_LIGHT // Enable light control
|
|
#define USE_ENERGY_SENSOR // Use energy sensors (+14k code)
|
|
#define USE_HLW8012 // Use energy sensor for Sonoff Pow and WolfBlitz
|
|
#define USE_CSE7766 // Use energy sensor for Sonoff S31 and Pow R2
|
|
|
|
/*********************************************************************************************\
|
|
* Power Type
|
|
\*********************************************************************************************/
|
|
|
|
typedef unsigned long power_t; // Power (Relay) type
|
|
const uint32_t POWER_MASK = 0xffffffffUL; // Power (Relay) full mask
|
|
|
|
/*********************************************************************************************\
|
|
* Constants
|
|
\*********************************************************************************************/
|
|
|
|
// Changes to the following MAX_ defines will impact settings layout
|
|
const uint8_t MAX_SWITCHES = 8; // Max number of switches
|
|
const uint8_t MAX_RELAYS = 8; // Max number of relays
|
|
const uint8_t MAX_INTERLOCKS = 4; // Max number of interlock groups (MAX_RELAYS / 2)
|
|
const uint8_t MAX_LEDS = 4; // Max number of leds
|
|
const uint8_t MAX_KEYS = 4; // Max number of keys or buttons
|
|
const uint8_t MAX_PWMS = 5; // Max number of PWM channels
|
|
const uint8_t MAX_COUNTERS = 4; // Max number of counter sensors
|
|
const uint8_t MAX_TIMERS = 16; // Max number of Timers
|
|
const uint8_t MAX_PULSETIMERS = 8; // Max number of supported pulse timers
|
|
const uint8_t MAX_FRIENDLYNAMES = 4; // Max number of Friendly names
|
|
const uint8_t MAX_DOMOTICZ_IDX = 4; // Max number of Domoticz device, key and switch indices
|
|
const uint8_t MAX_DOMOTICZ_SNS_IDX = 12; // Max number of Domoticz sensors indices
|
|
const uint8_t MAX_KNX_GA = 10; // Max number of KNX Group Addresses to read that can be set
|
|
const uint8_t MAX_KNX_CB = 10; // Max number of KNX Group Addresses to write that can be set
|
|
const uint8_t MAX_XNRG_DRIVERS = 32; // Max number of allowed energy drivers
|
|
const uint8_t MAX_XDSP_DRIVERS = 32; // Max number of allowed display drivers
|
|
const uint8_t MAX_XDRV_DRIVERS = 96; // Max number of allowed driver drivers
|
|
const uint8_t MAX_XSNS_DRIVERS = 96; // Max number of allowed sensor drivers
|
|
const uint8_t MAX_RULE_MEMS = 5; // Max number of saved vars
|
|
const uint8_t MAX_RULE_SETS = 3; // Max number of rule sets of size 512 characters
|
|
const uint16_t MAX_RULE_SIZE = 512; // Max number of characters in rules
|
|
|
|
const uint8_t MAX_HUE_DEVICES = 15; // Max number of Philips Hue device per emulation
|
|
|
|
const char MQTT_TOKEN_PREFIX[] PROGMEM = "%prefix%"; // To be substituted by mqtt_prefix[x]
|
|
const char MQTT_TOKEN_TOPIC[] PROGMEM = "%topic%"; // To be substituted by mqtt_topic, mqtt_grptopic, mqtt_buttontopic, mqtt_switchtopic
|
|
const char WIFI_HOSTNAME[] = "%s-%04d"; // Expands to <MQTT_TOPIC>-<last 4 decimal chars of MAC address>
|
|
|
|
const uint8_t CONFIG_FILE_SIGN = 0xA5; // Configuration file signature
|
|
const uint8_t CONFIG_FILE_XOR = 0x5A; // Configuration file xor (0 = No Xor)
|
|
|
|
const uint32_t HLW_PREF_PULSE = 12530; // was 4975us = 201Hz = 1000W
|
|
const uint32_t HLW_UREF_PULSE = 1950; // was 1666us = 600Hz = 220V
|
|
const uint32_t HLW_IREF_PULSE = 3500; // was 1666us = 600Hz = 4.545A
|
|
|
|
const uint8_t MQTT_RETRY_SECS = 10; // Minimum seconds to retry MQTT connection
|
|
const uint32_t GLOBAL_VALUES_VALID = 300; // Max number of seconds to keep last received values
|
|
const power_t APP_POWER = 0; // Default saved power state Off
|
|
const uint16_t WS2812_MAX_LEDS = 512; // Max number of LEDs
|
|
|
|
const uint32_t PWM_RANGE = 1023; // 255..1023 needs to be devisible by 256
|
|
//const uint16_t PWM_FREQ = 1000; // 100..1000 Hz led refresh
|
|
//const uint16_t PWM_FREQ = 910; // 100..1000 Hz led refresh (iTead value)
|
|
const uint16_t PWM_FREQ = 880; // 100..1000 Hz led refresh (BN-SZ01 value)
|
|
const uint16_t PWM_MAX = 4000; // [PWM_MAX] Maximum frequency - Default: 4000
|
|
const uint16_t PWM_MIN = 100; // [PWM_MIN] Minimum frequency - Default: 100
|
|
// For Dimmers use double of your mains AC frequecy (100 for 50Hz and 120 for 60Hz)
|
|
// For Controlling Servos use 50 and also set PWM_FREQ as 50 (DO NOT USE THESE VALUES FOR DIMMERS)
|
|
//#define PWM_LIGHTSCHEME0_IGNORE_SLEEP // Do not change sleep value for LightAnimate() scheme 0
|
|
|
|
const uint16_t MAX_POWER_HOLD = 10; // Time in SECONDS to allow max agreed power
|
|
const uint16_t MAX_POWER_WINDOW = 30; // Time in SECONDS to disable allow max agreed power
|
|
const uint16_t SAFE_POWER_HOLD = 10; // Time in SECONDS to allow max unit safe power
|
|
const uint16_t SAFE_POWER_WINDOW = 30; // Time in MINUTES to disable allow max unit safe power
|
|
const uint8_t MAX_POWER_RETRY = 5; // Retry count allowing agreed power limit overflow
|
|
|
|
const uint8_t STATES = 20; // Number of states per second using 50 mSec interval
|
|
const uint8_t IMMINENT_RESET_FACTOR = 10; // Factor to extent button hold time for imminent Reset to default 40 seconds using KEY_HOLD_TIME of 40
|
|
const uint32_t BOOT_LOOP_TIME = 10; // Number of seconds to stop detecting boot loops
|
|
const uint16_t SYSLOG_TIMER = 600; // Seconds to restore syslog_level
|
|
const uint16_t SERIALLOG_TIMER = 600; // Seconds to disable SerialLog
|
|
const uint8_t OTA_ATTEMPTS = 5; // Number of times to try fetching the new firmware
|
|
|
|
const uint16_t INPUT_BUFFER_SIZE = 520; // Max number of characters in (serial and http) command buffer
|
|
const uint16_t CMDSZ = 24; // Max number of characters in command
|
|
const uint16_t TOPSZ = 100; // Max number of characters in topic string
|
|
const uint16_t LOGSZ = 520; // Max number of characters in log
|
|
const uint16_t MIN_MESSZ = 893; // Min number of characters in MQTT message
|
|
|
|
const uint8_t SENSOR_MAX_MISS = 5; // Max number of missed sensor reads before deciding it's offline
|
|
|
|
const uint8_t MAX_BACKLOG = 30; // Max number of commands in backlog
|
|
const uint32_t MIN_BACKLOG_DELAY = 2; // Minimal backlog delay in 0.1 seconds
|
|
|
|
const uint32_t SOFT_BAUDRATE = 9600; // Default software serial baudrate
|
|
const uint32_t APP_BAUDRATE = 115200; // Default serial baudrate
|
|
const uint32_t SERIAL_POLLING = 100; // Serial receive polling in ms
|
|
const uint32_t ZIGBEE_POLLING = 100; // Serial receive polling in ms
|
|
const uint8_t MAX_STATUS = 11; // Max number of status lines
|
|
|
|
const uint32_t DRIVER_BOOT_DELAY = 1; // Number of milliseconds to retard driver cycles during boot-up time to reduce overall CPU load whilst Wifi is connecting
|
|
const uint32_t LOOP_SLEEP_DELAY = 50; // Lowest number of milliseconds to go through the main loop using delay when needed
|
|
|
|
/*********************************************************************************************\
|
|
* Defines
|
|
\*********************************************************************************************/
|
|
|
|
#define MAX_RULE_TIMERS 8 // Max number of rule timers (4 bytes / timer)
|
|
#define MAX_RULE_VARS 5 // Max number of rule variables (10 bytes / variable)
|
|
|
|
#define NO_EXTRA_4K_HEAP // Allocate 4k heap for WPS in ESP8166/Arduino core v2.4.2 (was always allocated in previous versions)
|
|
|
|
/*
|
|
// Removed from esp8266 core since 20171105
|
|
#define min(a,b) ((a)<(b)?(a):(b))
|
|
#define max(a,b) ((a)>(b)?(a):(b))
|
|
*/
|
|
#define tmin(a,b) ((a)<(b)?(a):(b))
|
|
#define tmax(a,b) ((a)>(b)?(a):(b))
|
|
|
|
#define STR_HELPER(x) #x
|
|
#ifndef STR
|
|
#define STR(x) STR_HELPER(x)
|
|
#endif
|
|
|
|
//enum ws2812NeopixelbusFeature { NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_3LED, NEO_RGBW, NEO_GRBW }; // Doesn't work
|
|
#define NEO_RGB 0 // Neopixel RGB leds
|
|
#define NEO_GRB 1 // Neopixel GRB leds
|
|
#define NEO_BRG 2 // Neopixel BRG leds
|
|
#define NEO_RBG 3 // Neopixel RBG leds
|
|
#define NEO_3LED 4 // Placeholder to test for 4 led types
|
|
#define NEO_RGBW 5 // Neopixel RGBW leds
|
|
#define NEO_GRBW 6 // Neopixel GRBW leds
|
|
|
|
#define LT_SM16716 16 // Lights that use SM16716 will have this bit set in light_type
|
|
|
|
#define RGB_REMAP_RGBW 0
|
|
#define RGB_REMAP_RBGW 6
|
|
#define RGB_REMAP_GRBW 24
|
|
#define RGB_REMAP_GBRW 30
|
|
#define RGB_REMAP_BRGW 48
|
|
#define RGB_REMAP_BGRW 54
|
|
|
|
#define MQTT_PUBSUBCLIENT 1 // Mqtt PubSubClient library
|
|
#define MQTT_TASMOTAMQTT 2 // Mqtt TasmotaMqtt library based on esp-mqtt-arduino - soon obsolete
|
|
#define MQTT_ESPMQTTARDUINO 3 // Mqtt esp-mqtt-arduino library by Ingo Randolf - obsolete but define is present for debugging purposes
|
|
#define MQTT_ARDUINOMQTT 4 // Mqtt arduino-mqtt library by Joel Gaehwiler (https://github.com/256dpi/arduino-mqtt)
|
|
|
|
// Sunrise and Sunset DawnType
|
|
#define DAWN_NORMAL -0.8333
|
|
#define DAWN_CIVIL -6.0
|
|
#define DAWN_NAUTIC -12.0
|
|
#define DAWN_ASTRONOMIC -18.0
|
|
|
|
// Sensor and Commands definition for KNX Driver
|
|
#define KNX_TEMPERATURE 17
|
|
#define KNX_HUMIDITY 18
|
|
#define KNX_ENERGY_VOLTAGE 19
|
|
#define KNX_ENERGY_CURRENT 20
|
|
#define KNX_ENERGY_POWER 21
|
|
#define KNX_ENERGY_POWERFACTOR 22
|
|
#define KNX_ENERGY_DAILY 23
|
|
#define KNX_ENERGY_START 24
|
|
#define KNX_ENERGY_TOTAL 25
|
|
#define KNX_SLOT1 26
|
|
#define KNX_SLOT2 27
|
|
#define KNX_SLOT3 28
|
|
#define KNX_SLOT4 29
|
|
#define KNX_SLOT5 30
|
|
#define KNX_MAX_device_param 30
|
|
#define MAX_KNXTX_CMNDS 5
|
|
|
|
/*********************************************************************************************\
|
|
* Enumeration
|
|
\*********************************************************************************************/
|
|
|
|
enum WeekInMonthOptions {Last, First, Second, Third, Fourth};
|
|
enum DayOfTheWeekOptions {Sun=1, Mon, Tue, Wed, Thu, Fri, Sat};
|
|
enum MonthNamesOptions {Jan=1, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec};
|
|
enum HemisphereOptions {North, South};
|
|
enum GetDateAndTimeOptions { DT_LOCAL, DT_UTC, DT_RESTART, DT_ENERGY };
|
|
|
|
enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
|
|
|
|
enum WifiConfigOptions {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL, WIFI_MANAGER_RESET_ONLY, MAX_WIFI_OPTION};
|
|
|
|
enum SwitchModeOptions {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE, MAX_SWITCH_OPTION};
|
|
|
|
enum LedStateOptions {LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT, MAX_LED_OPTION};
|
|
|
|
enum EmulationOptions {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
|
|
|
|
enum TopicOptions { CMND, STAT, TELE, nu1, RESULT_OR_CMND, RESULT_OR_STAT, RESULT_OR_TELE };
|
|
|
|
enum ExecuteCommandPowerOptions { POWER_OFF, POWER_ON, POWER_TOGGLE, POWER_BLINK, POWER_BLINK_STOP, power_nu1, POWER_OFF_NO_STATE, POWER_ON_NO_STATE, power_nu2, POWER_SHOW_STATE };
|
|
|
|
enum PowerOnStateOptions { POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON };
|
|
|
|
enum ButtonStates { PRESSED, NOT_PRESSED };
|
|
|
|
enum Shortcuts { SC_CLEAR, SC_DEFAULT, SC_USER };
|
|
|
|
enum SettingsParmaIndex {P_HOLD_TIME, P_MAX_POWER_RETRY, P_TUYA_DIMMER_ID, P_MDNS_DELAYED_START, P_BOOT_LOOP_OFFSET, P_RGB_REMAP, P_IR_UNKNOW_THRESHOLD, // SetOption32 .. SetOption38
|
|
P_CSE7766_INVALID_POWER, P_HOLD_IGNORE, P_TUYA_RELAYS, P_OVER_TEMP, // SetOption39 .. SetOption42
|
|
P_MAX_PARAM8}; // Max is PARAM8_SIZE (18) - SetOption32 until SetOption49
|
|
|
|
enum DomoticzSensors {DZ_TEMP, DZ_TEMP_HUM, DZ_TEMP_HUM_BARO, DZ_POWER_ENERGY, DZ_ILLUMINANCE, DZ_COUNT, DZ_VOLTAGE, DZ_CURRENT, DZ_AIRQUALITY, DZ_MAX_SENSORS};
|
|
|
|
enum Ws2812ClockIndex { WS_SECOND, WS_MINUTE, WS_HOUR, WS_MARKER };
|
|
enum Ws2812Color { WS_RED, WS_GREEN, WS_BLUE };
|
|
|
|
enum LightSubtypes { LST_NONE, LST_SINGLE, LST_COLDWARM, LST_RGB, LST_RGBW, LST_RGBWC, LST_MAX=5 }; // Do not insert new fields
|
|
enum LightTypes { LT_BASIC, LT_PWM1, LT_PWM2, LT_PWM3, LT_PWM4, LT_PWM5, LT_PWM6, LT_PWM7,
|
|
LT_NU8, LT_SERIAL1, LT_SERIAL2, LT_WS2812, LT_RGBW, LT_RGBWC, LT_NU14, LT_NU15 }; // Do not insert new fields
|
|
|
|
enum LightSchemes {LS_POWER, LS_WAKEUP, LS_CYCLEUP, LS_CYCLEDN, LS_RANDOM, LS_MAX};
|
|
|
|
enum XsnsFunctions {FUNC_SETTINGS_OVERRIDE, FUNC_MODULE_INIT, FUNC_PRE_INIT, FUNC_INIT,
|
|
FUNC_LOOP, FUNC_EVERY_50_MSECOND, FUNC_EVERY_100_MSECOND, FUNC_EVERY_200_MSECOND, FUNC_EVERY_250_MSECOND, FUNC_EVERY_SECOND,
|
|
FUNC_SAVE_AT_MIDNIGHT, FUNC_SAVE_BEFORE_RESTART,
|
|
FUNC_PREP_BEFORE_TELEPERIOD, FUNC_JSON_APPEND, FUNC_WEB_SENSOR, FUNC_COMMAND, FUNC_COMMAND_SENSOR, FUNC_COMMAND_DRIVER,
|
|
FUNC_MQTT_SUBSCRIBE, FUNC_MQTT_INIT, FUNC_MQTT_DATA,
|
|
FUNC_SET_POWER, FUNC_SET_DEVICE_POWER, FUNC_SHOW_SENSOR,
|
|
FUNC_ENERGY_EVERY_SECOND,
|
|
FUNC_RULES_PROCESS, FUNC_SERIAL, FUNC_FREE_MEM, FUNC_BUTTON_PRESSED,
|
|
FUNC_WEB_ADD_BUTTON, FUNC_WEB_ADD_MAIN_BUTTON, FUNC_WEB_ADD_HANDLER, FUNC_SET_CHANNELS};
|
|
|
|
enum CommandSource { SRC_IGNORE, SRC_MQTT, SRC_RESTART, SRC_BUTTON, SRC_SWITCH, SRC_BACKLOG, SRC_SERIAL, SRC_WEBGUI, SRC_WEBCOMMAND, SRC_WEBCONSOLE, SRC_PULSETIMER,
|
|
SRC_TIMER, SRC_RULE, SRC_MAXPOWER, SRC_MAXENERGY, SRC_OVERTEMP, SRC_LIGHT, SRC_KNX, SRC_DISPLAY, SRC_WEMO, SRC_HUE, SRC_RETRY, SRC_REMOTE, SRC_MAX };
|
|
const char kCommandSource[] PROGMEM = "I|MQTT|Restart|Button|Switch|Backlog|Serial|WebGui|WebCommand|WebConsole|PulseTimer|Timer|Rule|MaxPower|MaxEnergy|Overtemp|Light|Knx|Display|Wemo|Hue|Retry|Remote";
|
|
|
|
const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };
|
|
|
|
/*********************************************************************************************\
|
|
* Extern global variables
|
|
\*********************************************************************************************/
|
|
|
|
extern uint8_t light_device; // Light device number
|
|
extern power_t light_power; // Light power
|
|
extern uint8_t rotary_changed; // Rotary switch changed
|
|
|
|
#endif // _SONOFF_H_
|