mirror of https://github.com/arendst/Tasmota.git
400 lines
32 KiB
C
400 lines
32 KiB
C
/*
|
|
user_config.h - user specific configuration for Sonoff-Tasmota
|
|
|
|
Copyright (C) 2018 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _USER_CONFIG_H_
|
|
#define _USER_CONFIG_H_
|
|
|
|
/*********************************************************************************************\
|
|
* This file consists of TWO sections.
|
|
*
|
|
* SECTION 1:
|
|
* The first section contains PARAMETERS overriding flash settings if define CFG_HOLDER is CHANGED.
|
|
* All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
|
|
* Corresponding MQTT/Serial/Console commands are shown in [brackets]
|
|
*
|
|
* SECTION 2:
|
|
* The second section contains Enabled and Disabled FEATURES allowing different program size.
|
|
* Changes in this section do NOT need a change of define CFG_HOLDER.
|
|
*
|
|
* ATTENTION:
|
|
* Users are advised to use the user_config_override.h file for most changes.
|
|
\*********************************************************************************************/
|
|
|
|
//#define USE_CONFIG_OVERRIDE // Uncomment to use user_config_override.h file. See README.md
|
|
|
|
/*********************************************************************************************\
|
|
* SECTION 1
|
|
* - After initial load any change here only take effect if CFG_HOLDER is changed too
|
|
\*********************************************************************************************/
|
|
|
|
// -- Master parameter control --------------------
|
|
#define CFG_HOLDER 4617 // [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash
|
|
|
|
// -- Project -------------------------------------
|
|
#define PROJECT "sonoff" // PROJECT is used as the default topic delimiter
|
|
#define MODULE SONOFF_BASIC // [Module] Select default model from sonoff_template.h (Should not be changed)
|
|
|
|
#define SAVE_DATA 1 // [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)
|
|
#define SAVE_STATE 1 // [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)
|
|
|
|
// -- Wifi ----------------------------------------
|
|
#define WIFI_IP_ADDRESS "0.0.0.0" // [IpAddress1] Set to 0.0.0.0 for using DHCP or IP address
|
|
#define WIFI_GATEWAY "192.168.2.254" // [IpAddress2] If not using DHCP set Gateway IP address
|
|
#define WIFI_SUBNETMASK "255.255.255.0" // [IpAddress3] If not using DHCP set Network mask
|
|
#define WIFI_DNS "192.168.2.27" // [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)
|
|
|
|
#define STA_SSID1 "" // [Ssid1] Wifi SSID
|
|
#define STA_PASS1 "" // [Password1] Wifi password
|
|
#define STA_SSID2 "" // [Ssid2] Optional alternate AP Wifi SSID
|
|
#define STA_PASS2 "" // [Password2] Optional alternate AP Wifi password
|
|
#define WIFI_CONFIG_TOOL WIFI_WAIT // [WifiConfig] Default tool if wifi fails to connect
|
|
// (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)
|
|
#define WIFI_CONFIG_NO_SSID WIFI_WPSCONFIG // Default tool if wifi fails to connect and no SSID is configured
|
|
// (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)
|
|
// *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***
|
|
// *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***
|
|
// *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***
|
|
|
|
// -- Syslog --------------------------------------
|
|
#define SYS_LOG_HOST "" // [LogHost] (Linux) syslog host
|
|
#define SYS_LOG_PORT 514 // [LogPort] default syslog UDP port
|
|
#define SYS_LOG_LEVEL LOG_LEVEL_NONE // [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
|
|
#define SERIAL_LOG_LEVEL LOG_LEVEL_INFO // [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
|
|
#define WEB_LOG_LEVEL LOG_LEVEL_INFO // [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
|
|
|
|
// -- Ota -----------------------------------------
|
|
#define OTA_URL "http://sonoff.maddox.co.uk/tasmota/sonoff.bin" // [OtaUrl]
|
|
|
|
// -- MQTT ----------------------------------------
|
|
#define MQTT_USE 1 // [SetOption3] Select default MQTT use (0 = Off, 1 = On)
|
|
|
|
#define MQTT_HOST "" // [MqttHost]
|
|
#define MQTT_FINGERPRINT1 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint1]
|
|
#define MQTT_FINGERPRINT2 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint2]
|
|
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
|
|
#define MQTT_USER "DVES_USER" // [MqttUser] MQTT user
|
|
#define MQTT_PASS "DVES_PASS" // [MqttPassword] MQTT password
|
|
|
|
#define MQTT_BUTTON_RETAIN 0 // [ButtonRetain] Button may send retain flag (0 = off, 1 = on)
|
|
#define MQTT_POWER_RETAIN 0 // [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)
|
|
#define MQTT_SWITCH_RETAIN 0 // [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)
|
|
|
|
#define MQTT_STATUS_OFF "OFF" // [StateText1] Command or Status result when turned off (needs to be a string like "0" or "Off")
|
|
#define MQTT_STATUS_ON "ON" // [StateText2] Command or Status result when turned on (needs to be a string like "1" or "On")
|
|
#define MQTT_CMND_TOGGLE "TOGGLE" // [StateText3] Command to send when toggling (needs to be a string like "2" or "Toggle")
|
|
#define MQTT_CMND_HOLD "HOLD" // [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like "HOLD")
|
|
|
|
// -- MQTT topics ---------------------------------
|
|
// Example "tasmota/bedroom/%topic%/%prefix%/" up to 80 characers
|
|
#define MQTT_FULLTOPIC "%prefix%/%topic%/" // [FullTopic] Subscribe and Publish full topic name - Legacy topic
|
|
|
|
// %prefix% token options
|
|
#define SUB_PREFIX "cmnd" // [Prefix1] Sonoff devices subscribe to %prefix%/%topic% being SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC
|
|
#define PUB_PREFIX "stat" // [Prefix2] Sonoff devices publish to %prefix%/%topic% being PUB_PREFIX/MQTT_TOPIC
|
|
#define PUB_PREFIX2 "tele" // [Prefix3] Sonoff devices publish telemetry data to %prefix%/%topic% being PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER and TIME
|
|
// May be named the same as PUB_PREFIX
|
|
// %topic% token options (also ButtonTopic and SwitchTopic)
|
|
#define MQTT_TOPIC PROJECT // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address
|
|
#define MQTT_GRPTOPIC "sonoffs" // [GroupTopic] MQTT Group topic
|
|
#define MQTT_BUTTON_TOPIC "0" // [ButtonTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_BTN_%06X"' for unique topic including device MAC address
|
|
#define MQTT_SWITCH_TOPIC "0" // [SwitchTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_SW_%06X"' for unique topic including device MAC address
|
|
#define MQTT_CLIENT_ID "DVES_%06X" // [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address
|
|
|
|
// -- MQTT - Telemetry ----------------------------
|
|
#define TELE_PERIOD 300 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)
|
|
|
|
// -- MQTT - Domoticz -----------------------------
|
|
#define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds)
|
|
|
|
// -- MQTT - Home Assistant Discovery -------------
|
|
#define HOME_ASSISTANT_DISCOVERY_ENABLE 0 // [SetOption19] Home Assistant Discovery (0 = Disable, 1 = Enable)
|
|
|
|
// -- HTTP ----------------------------------------
|
|
#define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
|
|
#define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
|
|
#define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
|
|
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
|
|
|
|
// -- Time - Up to three NTP servers in your region
|
|
#define NTP_SERVER1 "pool.ntp.org" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)
|
|
#define NTP_SERVER2 "nl.pool.ntp.org" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)
|
|
#define NTP_SERVER3 "0.nl.pool.ntp.org" // [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)
|
|
|
|
// -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes
|
|
#define TIME_DST_HEMISPHERE North // [TimeDst] Hemisphere (0 or North, 1 or South)
|
|
#define TIME_DST_WEEK Last // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)
|
|
#define TIME_DST_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)
|
|
#define TIME_DST_MONTH Mar // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)
|
|
#define TIME_DST_HOUR 2 // Hour (0 to 23)
|
|
#define TIME_DST_OFFSET +120 // Offset from UTC in minutes (-780 to +780)
|
|
|
|
// -- Time - Start Standard Time and timezone offset from UTC in minutes
|
|
#define TIME_STD_HEMISPHERE North // [TimeStd] Hemisphere (0 or North, 1 or South)
|
|
#define TIME_STD_WEEK Last // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)
|
|
#define TIME_STD_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)
|
|
#define TIME_STD_MONTH Oct // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)
|
|
#define TIME_STD_HOUR 3 // Hour (0 to 23)
|
|
#define TIME_STD_OFFSET +60 // Offset from UTC in minutes (-780 to +780)
|
|
|
|
// -- Location ------------------------------------
|
|
#define LATITUDE 48.858360 // [Latitude] Your location to be used with sunrise and sunset
|
|
#define LONGITUDE 2.294442 // [Longitude] Your location to be used with sunrise and sunset
|
|
|
|
// -- Application ---------------------------------
|
|
#define APP_TIMEZONE 1 // [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST/TIME_STD)
|
|
#define APP_LEDSTATE LED_POWER // [LedState] Function of led
|
|
// (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)
|
|
#define APP_PULSETIME 0 // [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)
|
|
#define APP_POWERON_STATE POWER_ALL_SAVED // [PowerOnState] Power On Relay state
|
|
// (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON)
|
|
#define APP_BLINKTIME 10 // [BlinkTime] Time in 0.1 Sec to blink/toggle power for relay 1
|
|
#define APP_BLINKCOUNT 10 // [BlinkCount] Number of blinks (0 = 32000)
|
|
#define APP_SLEEP 0 // [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)
|
|
|
|
#define KEY_DEBOUNCE_TIME 50 // [ButtonDebounce] Number of mSeconds button press debounce time
|
|
#define KEY_HOLD_TIME 40 // [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message
|
|
#define SWITCH_DEBOUNCE_TIME 50 // [SwitchDebounce] Number of mSeconds switch press debounce time
|
|
#define SWITCH_MODE TOGGLE // [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE (the wall switch state)
|
|
#define WS2812_LEDS 30 // [Pixels] Number of WS2812 LEDs to start with (max is 512)
|
|
|
|
#define TEMP_CONVERSION 0 // [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)
|
|
#define TEMP_RESOLUTION 1 // [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature
|
|
#define HUMIDITY_RESOLUTION 1 // [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity
|
|
#define PRESSURE_RESOLUTION 1 // [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure
|
|
#define ENERGY_RESOLUTION 3 // [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh
|
|
|
|
/*********************************************************************************************\
|
|
* END OF SECTION 1
|
|
*
|
|
* SECTION 2
|
|
* - Enable a feature by removing both // in front of it
|
|
* - Disable a feature by preceding it with //
|
|
\*********************************************************************************************/
|
|
|
|
// -- Localization --------------------------------
|
|
// If non selected the default en-GB will be used
|
|
//#define MY_LANGUAGE bg-BG // Bulgarian in Bulgaria
|
|
//#define MY_LANGUAGE cs-CZ // Czech in Czech
|
|
//#define MY_LANGUAGE de-DE // German in Germany
|
|
//#define MY_LANGUAGE el-GR // Greek in Greece
|
|
//#define MY_LANGUAGE en-GB // English in Great Britain. Enabled by Default
|
|
//#define MY_LANGUAGE es-AR // Spanish in Argentina
|
|
//#define MY_LANGUAGE fr-FR // French in France
|
|
//#define MY_LANGUAGE hu-HU // Hungarian in Hungary
|
|
//#define MY_LANGUAGE it-IT // Italian in Italy
|
|
//#define MY_LANGUAGE nl-NL // Dutch in the Netherlands
|
|
//#define MY_LANGUAGE pl-PL // Polish in Poland
|
|
//#define MY_LANGUAGE pt-BR // Portuguese in Brazil
|
|
//#define MY_LANGUAGE pt-PT // Portuguese in Portugal
|
|
//#define MY_LANGUAGE ru-RU // Russian in Russia
|
|
//#define MY_LANGUAGE tr-TR // Turkish in Turkey
|
|
//#define MY_LANGUAGE uk-UK // Ukrainian in Ukrain
|
|
//#define MY_LANGUAGE zh-CN // Chinese (Simplified) in China
|
|
//#define MY_LANGUAGE zh-TW // Chinese (Traditional) in Taiwan
|
|
|
|
// -- Wifi Config tools ---------------------------
|
|
//#define USE_WPS // Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))
|
|
//#define USE_SMARTCONFIG // Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)
|
|
|
|
// -- OTA -----------------------------------------
|
|
//#define USE_ARDUINO_OTA // Add optional support for Arduino OTA (+13k code)
|
|
|
|
/*-------------------------------------------------------------------------------------------*\
|
|
* Select ONE of possible three MQTT library types below
|
|
\*-------------------------------------------------------------------------------------------*/
|
|
// Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.
|
|
#define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library
|
|
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
|
//#define MQTT_LIBRARY_TYPE MQTT_TASMOTAMQTT // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
|
|
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
|
|
//#define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
|
|
|
|
// -- MQTT ----------------------------------------
|
|
#define MQTT_TELE_RETAIN 0 // Tele messages may send retain flag (0 = off, 1 = on)
|
|
|
|
// -- MQTT - Domoticz -----------------------------
|
|
#define USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem)
|
|
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Domoticz Input Topic
|
|
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Domoticz Output Topic
|
|
|
|
// -- MQTT - Home Assistant Discovery -------------
|
|
#define USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+2k code)
|
|
#define HOME_ASSISTANT_DISCOVERY_PREFIX "homeassistant" // Home Assistant discovery prefix
|
|
|
|
// -- MQTT - TLS ----------------------------------
|
|
// !!! TLS uses a LOT OF MEMORY so be careful to enable other options at the same time !!!
|
|
//#define USE_MQTT_TLS // Use TLS for MQTT connection (+53k code, +15k mem)
|
|
|
|
// -- KNX IP Protocol -----------------------------
|
|
//#define USE_KNX // Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)
|
|
#define USE_KNX_WEB_MENU // Enable KNX WEB MENU (+8.3k code, +144 mem)
|
|
|
|
// -- HTTP ----------------------------------------
|
|
#define USE_WEBSERVER // Enable web server and Wifi Manager (+66k code, +8k mem)
|
|
#define WEB_PORT 80 // Web server Port for User and Admin mode
|
|
#define WEB_USERNAME "admin" // Web server Admin mode user name
|
|
#define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
|
|
|
|
// -- mDNS ----------------------------------------
|
|
#define USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem)
|
|
#define WEBSERVER_ADVERTISE // Provide access to webserver by name <Hostname>.local/
|
|
#define MQTT_HOST_DISCOVERY // Find MQTT host server (overrides MQTT_HOST if found)
|
|
|
|
// -- Time ----------------------------------------
|
|
#define USE_TIMERS // Add support for up to 16 timers (+2k2 code)
|
|
#define USE_TIMERS_WEB // Add timer webpage support (+4k5 code)
|
|
#define USE_SUNRISE // Add support for Sunrise and sunset tools (+16k)
|
|
#define SUNRISE_DAWN_ANGLE DAWN_NORMAL // Select desired Dawn Angle from (DAWN_NORMAL, DAWN_CIVIL, DAWN_NAUTIC, DAWN_ASTRONOMIC)
|
|
|
|
// -- Rules ---------------------------------------
|
|
#define USE_RULES // Add support for rules (+4k4 code)
|
|
|
|
// -- Internal Analog input -----------------------
|
|
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
|
|
|
// -- One wire sensors ----------------------------
|
|
// WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors
|
|
#define USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
|
//#define USE_DS18x20_LEGACY // Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
|
|
|
|
// -- I2C sensors ---------------------------------
|
|
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
|
|
|
#ifdef USE_I2C
|
|
#define USE_SHT // Enable SHT1X sensor (+1k4 code)
|
|
#define USE_HTU // Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
|
#define USE_BMP // Enable BMP085/BMP180/BMP280/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)
|
|
// #define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
|
|
#define USE_BH1750 // Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
|
// #define USE_VEML6070 // Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)
|
|
// #define USE_VEML6070_RSET 270000 // VEML6070, Rset in Ohm used on PCB board, default 270K = 270000ohm, range for this sensor: 220K ... 1Meg
|
|
// #define USE_VEML6070_SHOW_RAW // VEML6070, shows the raw value of UV-A
|
|
// #define USE_ADS1115 // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
|
// #define USE_ADS1115_I2CDEV // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)
|
|
// #define USE_INA219 // Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
|
#define USE_SHT3X // Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
|
// #define USE_TSL2561 // Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
|
// #define USE_MGS // Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
|
#define MGS_SENSOR_ADDR 0x04 // Default Mutichannel Gas sensor i2c address
|
|
#define USE_SGP30 // Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
|
// #define USE_SI1145 // Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
|
#define USE_LM75AD // Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
|
// #define USE_APDS9960 // Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
|
// #define USE_MCP230xx // Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
|
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x27 - set according to your wired setup)
|
|
// #define USE_MCP230xx_OUTPUT // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)
|
|
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
|
|
// #define USE_PCA9685 // Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
|
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
|
|
// #define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
|
// #define USE_CCS811 // Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
|
// #define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)
|
|
|
|
// #define USE_DISPLAY // Add I2C Display Support (+2k code)
|
|
#define USE_DISPLAY_MODES1TO5 // Enable display mode 1 to 5 in addition to mode 0
|
|
#define USE_DISPLAY_LCD // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
|
|
#define USE_DISPLAY_SSD1306 // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
|
|
#define USE_DISPLAY_MATRIX // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
|
|
#define MTX_ADDRESS1 0x71 // [DisplayAddress1] I2C address of first 8x8 matrix module
|
|
#define MTX_ADDRESS2 0x74 // [DisplayAddress2] I2C address of second 8x8 matrix module
|
|
#define MTX_ADDRESS3 0x75 // [DisplayAddress3] I2C address of third 8x8 matrix module
|
|
#define MTX_ADDRESS4 0x72 // [DisplayAddress4] I2C address of fourth 8x8 matrix module
|
|
#define MTX_ADDRESS5 0x73 // [DisplayAddress5] I2C address of fifth 8x8 matrix module
|
|
#define MTX_ADDRESS6 0x76 // [DisplayAddress6] I2C address of sixth 8x8 matrix module
|
|
#define MTX_ADDRESS7 0x00 // [DisplayAddress7] I2C address of seventh 8x8 matrix module
|
|
#define MTX_ADDRESS8 0x00 // [DisplayAddress8] I2C address of eigth 8x8 matrix module
|
|
|
|
#endif // USE_I2C
|
|
|
|
// -- SPI sensors ---------------------------------
|
|
//#define USE_SPI // SPI using library TasmotaTFT
|
|
|
|
#ifdef USE_SPI
|
|
#ifndef USE_DISPLAY
|
|
#define USE_DISPLAY // Add SPI Display support for 320x240 and 480x320 TFT
|
|
#endif
|
|
#define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
|
|
// #define USE_DISPLAY_EPAPER // [DisplayModel 5] Enable e-paper display (+19k code)
|
|
#endif // USE_SPI
|
|
|
|
// -- Serial sensors ------------------------------
|
|
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
|
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
|
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
|
#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
|
#define WORKING_PERIOD 5 // Working period of the SDS Sensor, Takes a reading every X Minutes
|
|
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
|
|
//#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy meter (+1k7 code)
|
|
#define SDM120_SPEED 9600 // SDM120-Modbus RS485 serial speed (default: 2400 baud)
|
|
//#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy meter (+2k code)
|
|
#define SDM630_SPEED 9600 // SDM630-Modbus RS485 serial speed (default: 9600 baud)
|
|
//#define USE_MP3_PLAYER // Use of the DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
|
#define MP3_VOLUME 10 // Set the startup volume on init, the range can be 0..30(max)
|
|
|
|
// Power monitoring sensors -----------------------
|
|
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
|
#define USE_PZEM2 // Add support for PZEM003,014,016,017 Energy monitor (+1k1 code)
|
|
#define USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
|
|
|
|
// -- Low level interface devices -----------------
|
|
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
|
// #define USE_IR_HVAC // Support for HVAC system using IR (+2k code)
|
|
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
|
|
|
#define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
|
#define USE_WS2812_CTYPE NEO_GRB // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)
|
|
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
|
|
|
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
|
|
|
#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
|
|
|
//#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
|
|
|
|
#define USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
|
|
|
|
/*********************************************************************************************\
|
|
* Debug features are only supported in development branch
|
|
\*********************************************************************************************/
|
|
|
|
//#define USE_DEBUG_DRIVER // Use xdrv_99_debug.ino providing commands CpuChk, CfgXor, CfgDump, CfgPeek and CfgPoke
|
|
|
|
/*********************************************************************************************\
|
|
* Optional firmware configurations
|
|
* Select none or just one for optional features and sensors as configured in sonoff_post.h
|
|
* See RELEASENOTES.md for selected features
|
|
\*********************************************************************************************/
|
|
|
|
//#define USE_CLASSIC // Create sonoff-classic with initial configuration tools WPS, SmartConfig and WifiManager
|
|
//#define USE_SENSORS // Create sonoff-sensors with useful sensors enabled
|
|
//#define USE_KNX_NO_EMULATION // Create sonoff-knx with KNX but without Emulation
|
|
//#define BE_MINIMAL // Create sonoff-minimal as intermediate firmware for OTA-MAGIC
|
|
|
|
/*********************************************************************************************\
|
|
* No user configurable items below
|
|
\*********************************************************************************************/
|
|
|
|
#if defined(USE_MQTT_TLS) && defined(USE_WEBSERVER)
|
|
#error "Select either USE_MQTT_TLS or USE_WEBSERVER as there is just not enough memory to play with"
|
|
#endif
|
|
|
|
#endif // _USER_CONFIG_H_
|