Tasmota/sonoff/xsns_33_ds3231.ino

179 lines
7.3 KiB
C++

/*
xsns_33_ds3231.ino - ds3231 RTC chip, act like sensor support for Sonoff-Tasmota
Copyright (C) 2019 Guy Elgabsi (guy.elg AT gmail.com)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_DS3231
/*********************************************************************************************\
DS3231 - its a accurate RTC that used in the SONOFF for get time when you not have internet connection
This is minimal library that use only for read/write time !
We store UTC time in the DS3231 , so we can use the standart functions.
HOWTO Use : first time, you must to have internet connection (use your mobile phone or try in other location).
once you have ntp connection , the DS3231 internal clock will be updated automatically.
you can now power off the device, from now and on the time is stored in the module and will
be restored when the is no connection to NTP.
Source: Guy Elgabsi with special thanks to Jack Christensen
I2C Address: 0x68
\*********************************************************************************************/
#define XSNS_33 33
//DS3232 I2C Address
#ifndef USE_RTC_ADDR
#define USE_RTC_ADDR 0x68
#endif
//DS3232 Register Addresses
#define RTC_SECONDS 0x00
#define RTC_MINUTES 0x01
#define RTC_HOURS 0x02
#define RTC_DAY 0x03
#define RTC_DATE 0x04
#define RTC_MONTH 0x05
#define RTC_YEAR 0x06
#define RTC_CONTROL 0x0E
#define RTC_STATUS 0x0F
//Control register bits
#define OSF 7
#define EOSC 7
#define BBSQW 6
#define CONV 5
#define RS2 4
#define RS1 3
#define INTCN 2
//Other
#define HR1224 6 //Hours register 12 or 24 hour mode (24 hour mode==0)
#define CENTURY 7 //Century bit in Month register
#define DYDT 6 //Day/Date flag bit in alarm Day/Date registers
bool ds3231ReadStatus = false;
bool ds3231WriteStatus = false; //flag, we want to wriet/write to DS3231 onlu once
bool DS3231chipDetected = false;
/*----------------------------------------------------------------------*
Detect the DS3231 Chip
----------------------------------------------------------------------*/
void DS3231Detect(void)
{
DS3231chipDetected = false;
if (I2cValidRead(USE_RTC_ADDR, RTC_STATUS, 1)) {
AddLog_P2(LOG_LEVEL_INFO, S_LOG_I2C_FOUND_AT, "DS3231", USE_RTC_ADDR);
DS3231chipDetected = true;
} else {
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_I2C "DS3231 NOT " D_FOUND_AT " 0x%x"), USE_RTC_ADDR);
}
}
/*----------------------------------------------------------------------*
BCD-to-Decimal conversion
----------------------------------------------------------------------*/
uint8_t bcd2dec(uint8_t n)
{
return n - 6 * (n >> 4);
}
/*----------------------------------------------------------------------*
Decimal-to-BCD conversion
----------------------------------------------------------------------*/
uint8_t dec2bcd(uint8_t n)
{
return n + 6 * (n / 10);
}
/*----------------------------------------------------------------------*
Read time from DS3231 and return the epoch time (second since 1-1-1970 00:00)
----------------------------------------------------------------------*/
uint32_t ReadFromDS3231(void)
{
TIME_T tm;
tm.second = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_SECONDS));
tm.minute = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_MINUTES));
tm.hour = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_HOURS) & ~_BV(HR1224)); //assumes 24hr clock
tm.day_of_week = I2cRead8(USE_RTC_ADDR, RTC_DAY);
tm.day_of_month = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_DATE));
tm.month = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_MONTH) & ~_BV(CENTURY)); //don't use the Century bit
tm.year = bcd2dec(I2cRead8(USE_RTC_ADDR, RTC_YEAR));
return MakeTime(tm);
}
/*----------------------------------------------------------------------*
Get time as TIME_T and set the DS3231 time to this value
----------------------------------------------------------------------*/
void SetDS3231Time (uint32_t epoch_time) {
TIME_T tm;
BreakTime(epoch_time, tm);
I2cWrite8(USE_RTC_ADDR, RTC_SECONDS, dec2bcd(tm.second));
I2cWrite8(USE_RTC_ADDR, RTC_MINUTES, dec2bcd(tm.minute));
I2cWrite8(USE_RTC_ADDR, RTC_HOURS, dec2bcd(tm.hour));
I2cWrite8(USE_RTC_ADDR, RTC_DAY, tm.day_of_week);
I2cWrite8(USE_RTC_ADDR, RTC_DATE, dec2bcd(tm.day_of_month));
I2cWrite8(USE_RTC_ADDR, RTC_MONTH, dec2bcd(tm.month));
I2cWrite8(USE_RTC_ADDR, RTC_YEAR, dec2bcd(tm.year));
I2cWrite8(USE_RTC_ADDR, RTC_STATUS, I2cRead8(USE_RTC_ADDR, RTC_STATUS) & ~_BV(OSF)); //clear the Oscillator Stop Flag
}
/*********************************************************************************************\
Interface
\*********************************************************************************************/
bool Xsns33(uint8_t function)
{
bool result = false;
if (i2c_flg) {
switch (function) {
case FUNC_INIT:
DS3231Detect();
break;
case FUNC_EVERY_SECOND:
TIME_T tmpTime;
if (!ds3231ReadStatus && DS3231chipDetected && Rtc.utc_time < 1451602800 ) { // We still did not sync with NTP (time not valid) , so, read time from DS3231
ntp_force_sync = true; //force to sync with ntp
Rtc.utc_time = ReadFromDS3231(); //we read UTC TIME from DS3231
// from this line, we just copy the function from "void RtcSecond()" at the support.ino ,line 2143 and above
// We need it to set rules etc.
BreakTime(Rtc.utc_time, tmpTime);
if (Rtc.utc_time < 1451602800 ) {
ds3231ReadStatus = true; //if time in DS3231 is valid, do not update again
}
RtcTime.year = tmpTime.year + 1970;
Rtc.daylight_saving_time = RuleToTime(Settings.tflag[1], RtcTime.year);
Rtc.standard_time = RuleToTime(Settings.tflag[0], RtcTime.year);
AddLog_P2(LOG_LEVEL_INFO, PSTR("Set time from DS3231 to RTC (" D_UTC_TIME ") %s, (" D_DST_TIME ") %s, (" D_STD_TIME ") %s"),
GetTime(0).c_str(), GetTime(2).c_str(), GetTime(3).c_str());
if (Rtc.local_time < 1451602800) { // 2016-01-01
rules_flag.time_init = 1;
} else {
rules_flag.time_set = 1;
}
}
else if (!ds3231WriteStatus && DS3231chipDetected && Rtc.utc_time > 1451602800 && abs(Rtc.utc_time - ReadFromDS3231()) > 60) {//if time is valid and is drift from RTC in more that 60 second
AddLog_P2(LOG_LEVEL_INFO, PSTR("Write Time TO DS3231 from NTP (" D_UTC_TIME ") %s, (" D_DST_TIME ") %s, (" D_STD_TIME ") %s"),
GetTime(0).c_str(), GetTime(2).c_str(), GetTime(3).c_str());
SetDS3231Time (Rtc.utc_time); //update the DS3231 time
ds3231WriteStatus = true;
}
break;
}
}
return result;
}
#endif // USE_DS3231
#endif // USE_I2C