mirror of https://github.com/arendst/Tasmota.git
540 lines
19 KiB
C++
540 lines
19 KiB
C++
/*
|
|
xdrv_69_pca9557.ino - PCA9557 GPIO Expander support for Tasmota
|
|
|
|
SPDX-FileCopyrightText: 2023 Theo Arends
|
|
|
|
SPDX-License-Identifier: GPL-3.0-only
|
|
*/
|
|
|
|
#ifdef USE_I2C
|
|
#ifdef USE_PCA9557
|
|
/*********************************************************************************************\
|
|
* 8-bit PCA9557 I2C GPIO Expander to be used as virtual relay
|
|
*
|
|
* Docs at https://www.nxp.com/products/interfaces/ic-spi-i3c-interface-devices/general-purpose-i-o-gpio/8-bit-ic-bus-and-smbus-i-o-port-with-reset:PCA9557
|
|
*
|
|
* I2C Addresses: 0x18 - 0x1F
|
|
*
|
|
* The goal of the driver is to provide a sequential list of pins configured as Tasmota template
|
|
* and handle any input and output as configured GPIOs.
|
|
*
|
|
* Restrictions:
|
|
* - Uses incremental I2C addresses until template pin count reached
|
|
* - Max support for 32 buttons (input) / 28 switches (input) / 32 relays (output)
|
|
*
|
|
* Supported template fields:
|
|
* NAME - Template name
|
|
* BASE - Optional. 0 = use relative relays (default), 1 = use absolute relays
|
|
* GPIO - Sequential list of pin 1 and up with configured GPIO function
|
|
* Function Code Description
|
|
* ------------------- -------- ----------------------------------------
|
|
* None 0 Not used
|
|
* Button_n1..32 Bn 64..95 Button to Gnd without internal pullup
|
|
* Button_in1..32 Bin 128..159 Button inverted to Vcc without internal pullup
|
|
* Switch_n1..28 Sn 192..219 Switch to Gnd without internal pullup
|
|
* Relay1..32 R 224..255 Relay
|
|
* Relay_i1..32 Ri 256..287 Relay inverted
|
|
* Output_Hi Oh 3840 Fixed output high
|
|
* Output_lo Ol 3872 Fixed output low
|
|
*
|
|
* Prepare a template to be loaded either by:
|
|
* - a rule like: rule3 on file#pca9557.dat do {"NAME":"PCA9557","GPIO":[224,225,226,227,228,229,230,231]} endon
|
|
* - a script like: -y{"NAME":"PCA9557","GPIO":[224,225,226,227,228,229,230,231]}
|
|
* - file called pca9557.dat with contents: {"NAME":"PCA9557","GPIO":[224,225,226,227,228,229,230,231]}
|
|
*
|
|
* Inverted relays Ri1 Ri2 Ri3 Ri4 Ri5 Ri6 Ri7 Ri8
|
|
* {"NAME":"PCA9557","GPIO":[256,257,258,259,260,261,262,263]}
|
|
*
|
|
* Inverted relays and buttons Ri8 Ri7 Ri6 Ri5 Ri4 Ri3 Ri2 Ri1 B1 B2 B3 B4 B5 B6 B7 B8
|
|
* {"NAME":"PCA9557 A=Ri8-1, B=B1-8","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39]}
|
|
*
|
|
* Buttons and relays B1 B2 B3 B4 R1 R2 R3 R4
|
|
* {"NAME":"PCA9557 A=B1-8, B=R1-8","GPIO":[32,33,34,35,224,225,226,227]}
|
|
*
|
|
* 16 relays R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16
|
|
* {"NAME":"PCA9557","GPIO":[224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239]}
|
|
*
|
|
*
|
|
\*********************************************************************************************/
|
|
|
|
#define XDRV_69 69
|
|
#define XI2C_81 81 // See I2CDEVICES.md
|
|
|
|
#define PCA9557_ADDR_START 0x18 // 24
|
|
#define PCA9557_ADDR_END 0x20 // 32 (not included)
|
|
|
|
#define PCA9557_MAX_DEVICES 8
|
|
|
|
|
|
/*********************************************************************************************\
|
|
* PCA9557 support
|
|
\*********************************************************************************************/
|
|
|
|
enum PCA9557Registers {
|
|
PCA9557_R0 = 0x00, // (R/ ) Register 0 - Input port register
|
|
PCA9557_R1 = 0x01, // (R/W) Register 1 - Output port register
|
|
PCA9557_R2 = 0x02, // (R/W) Register 2 - Polarity inversion register
|
|
PCA9557_R3 = 0x03, // (R/W) Register 3 - Configuration register
|
|
};
|
|
|
|
typedef struct {
|
|
uint8_t r1;
|
|
uint8_t address;
|
|
uint8_t pins; // 8 (PCA9557)
|
|
} tPca9557Device;
|
|
|
|
struct PCA9557 {
|
|
tPca9557Device device[PCA9557_MAX_DEVICES];
|
|
uint32_t relay_inverted;
|
|
uint32_t button_inverted;
|
|
uint8_t chip;
|
|
uint8_t max_devices;
|
|
uint8_t max_pins;
|
|
uint8_t relay_max;
|
|
uint8_t relay_offset;
|
|
uint8_t button_max;
|
|
uint8_t switch_max;
|
|
int8_t button_offset;
|
|
int8_t switch_offset;
|
|
bool base;
|
|
} Pca9557;
|
|
|
|
uint16_t *Pca9557_gpio_pin = nullptr;
|
|
|
|
/*********************************************************************************************\
|
|
* PCA9557 - I2C
|
|
\*********************************************************************************************/
|
|
|
|
void PCA9557DumpRegs(void) {
|
|
uint8_t data[4];
|
|
for (Pca9557.chip = 0; Pca9557.chip < Pca9557.max_devices; Pca9557.chip++) {
|
|
uint32_t data_size = sizeof(data);
|
|
I2cReadBuffer(Pca9557.device[Pca9557.chip].address, 0, data, data_size);
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("PCA: Intf %d, Address %02X, Regs %*_H"), Pca9557.device[Pca9557.chip].address, data_size, data);
|
|
}
|
|
}
|
|
|
|
uint32_t PCA9557Read(uint8_t reg) {
|
|
uint32_t value = 0;
|
|
value = I2cRead8(Pca9557.device[Pca9557.chip].address, reg);
|
|
return value;
|
|
}
|
|
|
|
bool PCA9557ValidRead(uint8_t reg, uint8_t *data) {
|
|
return I2cValidRead8(data, Pca9557.device[Pca9557.chip].address, reg);
|
|
return false;
|
|
}
|
|
|
|
void PCA9557Write(uint8_t reg, uint8_t value) {
|
|
I2cWrite8(Pca9557.device[Pca9557.chip].address, reg, value);
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void PCA9557Update(uint8_t pin, bool pin_value, uint8_t reg_addr) {
|
|
// pin = 0 - 7
|
|
uint8_t bit = pin % 8;
|
|
uint8_t reg_value = 0;
|
|
if (reg_addr == PCA9557_R1) {
|
|
reg_value = Pca9557.device[Pca9557.chip].r1;
|
|
} else {
|
|
reg_value = PCA9557Read(reg_addr);
|
|
}
|
|
if (pin_value) {
|
|
reg_value |= 1 << bit;
|
|
} else {
|
|
reg_value &= ~(1 << bit);
|
|
}
|
|
PCA9557Write(reg_addr, reg_value);
|
|
if (reg_addr == PCA9557_R1) {
|
|
Pca9557.device[Pca9557.chip].r1 = reg_value;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
uint32_t PCA9557SetChip(uint8_t pin) {
|
|
// Calculate chip based on number of pins per chip. 8 for PCA9557
|
|
// pin 0 - 63
|
|
for (Pca9557.chip = 0; Pca9557.chip < Pca9557.max_devices; Pca9557.chip++) {
|
|
if (Pca9557.device[Pca9557.chip].pins > pin) { break; }
|
|
pin -= Pca9557.device[Pca9557.chip].pins;
|
|
}
|
|
return pin; // relative pin number within chip (0 ... 7)
|
|
}
|
|
|
|
void PCA9557PinMode(uint8_t pin, uint8_t flags) {
|
|
// pin 0 - 63
|
|
pin = PCA9557SetChip(pin);
|
|
uint8_t iodir = PCA9557_R3;
|
|
switch (flags) {
|
|
case INPUT:
|
|
PCA9557Update(pin, true, iodir);
|
|
break;
|
|
case OUTPUT:
|
|
PCA9557Update(pin, false, iodir);
|
|
break;
|
|
}
|
|
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: PCA9557PinMode chip %d, pin %d, flags %d, regs %d"), Pca9557.chip, pin, flags, iodir);
|
|
}
|
|
|
|
|
|
void PCA9557SetPinModes(uint8_t pin, uint8_t flags) {
|
|
// pin 0 - 63
|
|
PCA9557PinMode(pin, flags);
|
|
}
|
|
|
|
bool PCA9557DigitalRead(uint8_t pin) {
|
|
// pin 0 - 63
|
|
pin = PCA9557SetChip(pin);
|
|
uint8_t bit = pin % 8;
|
|
uint8_t reg_addr = PCA9557_R0;
|
|
uint8_t value = PCA9557Read(reg_addr);
|
|
return value & (1 << bit);
|
|
}
|
|
|
|
void PCA9557DigitalWrite(uint8_t pin, bool value) {
|
|
// pin 0 - 63
|
|
pin = PCA9557SetChip(pin);
|
|
uint8_t reg_addr = PCA9557_R1;
|
|
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: PCA9557DigitalWrite chip %d, pin %d, state %d, reg %d"), Pca9557.chip, pin, value, reg_addr);
|
|
|
|
PCA9557Update(pin, value, reg_addr);
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Tasmota
|
|
\*********************************************************************************************/
|
|
|
|
int PCA9557Pin(uint32_t gpio, uint32_t index = 0);
|
|
int PCA9557Pin(uint32_t gpio, uint32_t index) {
|
|
uint16_t real_gpio = gpio << 5;
|
|
uint16_t mask = 0xFFE0;
|
|
if (index < GPIO_ANY) {
|
|
real_gpio += index;
|
|
mask = 0xFFFF;
|
|
}
|
|
for (uint32_t i = 0; i < Pca9557.max_pins; i++) {
|
|
if ((Pca9557_gpio_pin[i] & mask) == real_gpio) {
|
|
return i; // Pin number configured for gpio
|
|
}
|
|
}
|
|
return -1; // No pin used for gpio
|
|
}
|
|
|
|
bool PCA9557PinUsed(uint32_t gpio, uint32_t index = 0);
|
|
bool PCA9557PinUsed(uint32_t gpio, uint32_t index) {
|
|
return (PCA9557Pin(gpio, index) >= 0);
|
|
}
|
|
|
|
uint32_t PCA9557GetPin(uint32_t lpin) {
|
|
if (lpin < Pca9557.max_pins) {
|
|
return Pca9557_gpio_pin[lpin];
|
|
} else {
|
|
return GPIO_NONE;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************/
|
|
|
|
String PCA9557TemplateLoadFile(void) {
|
|
String pcatmplt = "";
|
|
#ifdef USE_UFILESYS
|
|
pcatmplt = TfsLoadString("/pca9557.dat");
|
|
#endif // USE_UFILESYS
|
|
#ifdef USE_RULES
|
|
if (!pcatmplt.length()) {
|
|
pcatmplt = RuleLoadFile("PCA9557.DAT");
|
|
}
|
|
#endif // USE_RULES
|
|
#ifdef USE_SCRIPT
|
|
if (!pcatmplt.length()) {
|
|
pcatmplt = ScriptLoadSection(">y");
|
|
}
|
|
#endif // USE_SCRIPT
|
|
return pcatmplt;
|
|
}
|
|
|
|
bool PCA9557LoadTemplate(void) {
|
|
String pcatmplt = PCA9557TemplateLoadFile();
|
|
uint32_t len = pcatmplt.length() +1;
|
|
if (len < 7) { return false; } // No PcaTmplt found
|
|
|
|
JsonParser parser((char*)pcatmplt.c_str());
|
|
JsonParserObject root = parser.getRootObject();
|
|
if (!root) { return false; }
|
|
|
|
// rule3 on file#pca9557.dat do {"NAME":"PCA9557","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231]} endon
|
|
// rule3 on file#pca9557.dat do {"NAME":"PCA9557","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39]} endon
|
|
// rule3 on file#pca9557.dat do {"NAME":"PCA9557 A=Ri8-1, B=B1-8","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39]} endon
|
|
// rule3 on file#pca9557.dat do {"NAME":"PCA9557 A=Ri8-1, B=B1-8, C=Ri16-9, D=B9-16","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39,271,270,269,268,267,266,265,264,40,41,42,43,44,45,46,47]} endon
|
|
|
|
// {"NAME":"PCA9557","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231]}
|
|
// {"NAME":"PCA9557","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231,40,41,42,43,44,45,46,47,232,233,234,235,236,237,238,239]}
|
|
JsonParserToken val = root[PSTR(D_JSON_BASE)];
|
|
if (val) {
|
|
Pca9557.base = (val.getUInt()) ? true : false;
|
|
}
|
|
val = root[PSTR(D_JSON_NAME)];
|
|
if (val) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("PCA: Base %d, Template '%s'"), Pca9557.base, val.getStr());
|
|
}
|
|
JsonParserArray arr = root[PSTR(D_JSON_GPIO)];
|
|
if (arr) {
|
|
uint32_t pin = 0;
|
|
for (pin; pin < Pca9557.max_pins; pin++) { // Max number of detected chip pins
|
|
JsonParserToken val = arr[pin];
|
|
if (!val) { break; }
|
|
uint16_t mpin = val.getUInt();
|
|
if (mpin) { // Above GPIO_NONE
|
|
if ((mpin >= AGPIO(GPIO_SWT1_NP)) && (mpin < (AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES_SET))) {
|
|
mpin -= (AGPIO(GPIO_SWT1_NP) - AGPIO(GPIO_SWT1));
|
|
Pca9557.switch_max++;
|
|
PCA9557SetPinModes(pin, INPUT);
|
|
}
|
|
else if ((mpin >= AGPIO(GPIO_KEY1_NP)) && (mpin < (AGPIO(GPIO_KEY1_NP) + MAX_KEYS_SET))) {
|
|
mpin -= (AGPIO(GPIO_KEY1_NP) - AGPIO(GPIO_KEY1));
|
|
Pca9557.button_max++;
|
|
PCA9557SetPinModes(pin, INPUT);
|
|
}
|
|
else if ((mpin >= AGPIO(GPIO_KEY1_INV_NP)) && (mpin < (AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS_SET))) {
|
|
bitSet(Pca9557.button_inverted, mpin - AGPIO(GPIO_KEY1_INV_NP));
|
|
mpin -= (AGPIO(GPIO_KEY1_INV_NP) - AGPIO(GPIO_KEY1));
|
|
Pca9557.button_max++;
|
|
PCA9557SetPinModes(pin, INPUT);
|
|
}
|
|
else if ((mpin >= AGPIO(GPIO_REL1)) && (mpin < (AGPIO(GPIO_REL1) + MAX_RELAYS_SET))) {
|
|
Pca9557.relay_max++;
|
|
PCA9557PinMode(pin, OUTPUT);
|
|
}
|
|
else if ((mpin >= AGPIO(GPIO_REL1_INV)) && (mpin < (AGPIO(GPIO_REL1_INV) + MAX_RELAYS_SET))) {
|
|
bitSet(Pca9557.relay_inverted, mpin - AGPIO(GPIO_REL1_INV));
|
|
mpin -= (AGPIO(GPIO_REL1_INV) - AGPIO(GPIO_REL1));
|
|
Pca9557.relay_max++;
|
|
PCA9557PinMode(pin, OUTPUT);
|
|
}
|
|
else if (mpin == AGPIO(GPIO_OUTPUT_HI)) {
|
|
PCA9557PinMode(pin, OUTPUT);
|
|
PCA9557DigitalWrite(pin, 1);
|
|
}
|
|
else if (mpin == AGPIO(GPIO_OUTPUT_LO)) {
|
|
PCA9557PinMode(pin, OUTPUT);
|
|
PCA9557DigitalWrite(pin, 0);
|
|
}
|
|
else { mpin = 0; }
|
|
Pca9557_gpio_pin[pin] = mpin;
|
|
}
|
|
if ((Pca9557.switch_max >= MAX_SWITCHES_SET) ||
|
|
(Pca9557.button_max >= MAX_KEYS_SET) ||
|
|
(Pca9557.relay_max >= MAX_RELAYS_SET)) {
|
|
AddLog(LOG_LEVEL_INFO, PSTR("PCA: Max reached (S%d/B%d/R%d)"), Pca9557.switch_max, Pca9557.button_max, Pca9557.relay_max);
|
|
break;
|
|
}
|
|
}
|
|
Pca9557.max_pins = pin; // Max number of configured pins
|
|
}
|
|
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("PCA: Pins %d, Pca9557_gpio_pin %*_V"), Pca9557.max_pins, Pca9557.max_pins, (uint8_t*)Pca9557_gpio_pin);
|
|
|
|
return true;
|
|
}
|
|
|
|
uint32_t PCA9557TemplateGpio(void) {
|
|
String pcatmplt = PCA9557TemplateLoadFile();
|
|
uint32_t len = pcatmplt.length() +1;
|
|
if (len < 7) { return 0; } // No PcaTmplt found
|
|
|
|
JsonParser parser((char*)pcatmplt.c_str());
|
|
JsonParserObject root = parser.getRootObject();
|
|
if (!root) { return 0; }
|
|
|
|
JsonParserArray arr = root[PSTR(D_JSON_GPIO)];
|
|
if (arr.isArray()) {
|
|
return arr.size(); // Number of requested pins
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void PCA9557ModuleInit(void) {
|
|
int32_t pins_needed = PCA9557TemplateGpio();
|
|
if (!pins_needed) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("PCA: Invalid template"));
|
|
return;
|
|
}
|
|
|
|
|
|
uint8_t pca9557_address = PCA9557_ADDR_START;
|
|
while ((Pca9557.max_devices < PCA9557_MAX_DEVICES) && (pca9557_address < PCA9557_ADDR_END)) {
|
|
Pca9557.chip = Pca9557.max_devices;
|
|
if (I2cSetDevice(pca9557_address)) {
|
|
Pca9557.device[Pca9557.chip].address = pca9557_address;
|
|
|
|
uint8_t buffer;
|
|
if (PCA9557ValidRead(PCA9557_R2, &buffer)) {
|
|
I2cSetActiveFound(pca9557_address, "PCA9557");
|
|
Pca9557.device[Pca9557.chip].pins = 8;
|
|
PCA9557Write(PCA9557_R2, 0b00000000); // disable polarity inversion
|
|
Pca9557.max_devices++;
|
|
|
|
Pca9557.max_pins += Pca9557.device[Pca9557.chip].pins;
|
|
pins_needed -= Pca9557.device[Pca9557.chip].pins;
|
|
}
|
|
}
|
|
if (pins_needed) {
|
|
pca9557_address++;
|
|
} else {
|
|
pca9557_address = PCA9557_ADDR_END;
|
|
}
|
|
}
|
|
|
|
|
|
if (!Pca9557.max_devices) { return; }
|
|
|
|
Pca9557_gpio_pin = (uint16_t*)calloc(Pca9557.max_pins, 2);
|
|
if (!Pca9557_gpio_pin) { return; }
|
|
|
|
if (!PCA9557LoadTemplate()) {
|
|
AddLog(LOG_LEVEL_INFO, PSTR("PCA: No valid template found")); // Too many GPIO's
|
|
Pca9557.max_devices = 0;
|
|
return;
|
|
}
|
|
|
|
Pca9557.relay_offset = TasmotaGlobal.devices_present;
|
|
Pca9557.relay_max -= UpdateDevicesPresent(Pca9557.relay_max);
|
|
|
|
Pca9557.button_offset = -1;
|
|
Pca9557.switch_offset = -1;
|
|
}
|
|
|
|
void PCA9557ServiceInput(void) {
|
|
// I found no reliable way to receive interrupts; noise received at undefined moments - unstable usage
|
|
// Pca9557.interrupt = false;
|
|
// This works with no interrupt
|
|
uint32_t pin_offset = 0;
|
|
uint32_t gpio;
|
|
for (Pca9557.chip = 0; Pca9557.chip < Pca9557.max_devices; Pca9557.chip++) {
|
|
gpio = PCA9557Read(PCA9557_R0); // Read PCA9557 gpio
|
|
|
|
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("PCA: Chip %d, State %02X"), Pca9557.chip, gpio);
|
|
|
|
uint32_t mask = 1;
|
|
for (uint32_t pin = 0; pin < Pca9557.device[Pca9557.chip].pins; pin++) {
|
|
uint32_t state = ((gpio & mask) != 0);
|
|
uint32_t lpin = PCA9557GetPin(pin_offset + pin); // 0 for None, 32 for KEY1, 160 for SWT1, 224 for REL1
|
|
uint32_t index = lpin & 0x001F; // Max 32 buttons or switches
|
|
lpin = BGPIO(lpin); // UserSelectablePins number
|
|
if (GPIO_KEY1 == lpin) {
|
|
ButtonSetVirtualPinState(Pca9557.button_offset + index, (state != bitRead(Pca9557.button_inverted, index)));
|
|
}
|
|
else if (GPIO_SWT1 == lpin) {
|
|
SwitchSetVirtualPinState(Pca9557.switch_offset + index, state);
|
|
}
|
|
mask <<= 1;
|
|
}
|
|
pin_offset += Pca9557.device[Pca9557.chip].pins;
|
|
}
|
|
}
|
|
|
|
void PCA9557Init(void) {
|
|
PCA9557Write(PCA9557_R2, 0b00000000); // disable polarity inversion
|
|
}
|
|
|
|
void PCA9557Power(void) {
|
|
// XdrvMailbox.index = 32-bit rpower bit mask
|
|
// Use absolute relay indexes unique with main template
|
|
power_t rpower = XdrvMailbox.index;
|
|
uint32_t relay_max = TasmotaGlobal.devices_present;
|
|
if (!Pca9557.base) {
|
|
// Use relative and sequential relay indexes
|
|
rpower >>= Pca9557.relay_offset;
|
|
relay_max = Pca9557.relay_max;
|
|
}
|
|
for (uint32_t index = 0; index < relay_max; index++) {
|
|
power_t state = rpower &1;
|
|
if (PCA9557PinUsed(GPIO_REL1, index)) {
|
|
uint32_t pin = PCA9557Pin(GPIO_REL1, index) & 0x3F; // Fix possible overflow over 63 gpios
|
|
PCA9557DigitalWrite(pin, bitRead(Pca9557.relay_inverted, index) ? !state : state);
|
|
}
|
|
rpower >>= 1; // Select next power
|
|
}
|
|
}
|
|
|
|
|
|
bool PCA9557AddButton(void) {
|
|
// XdrvMailbox.index = button/switch index
|
|
uint32_t index = XdrvMailbox.index;
|
|
if (!Pca9557.base) {
|
|
// Use relative and sequential button indexes
|
|
if (Pca9557.button_offset < 0) { Pca9557.button_offset = index; }
|
|
index -= Pca9557.button_offset;
|
|
if (index >= Pca9557.button_max) { return false; }
|
|
} else {
|
|
// Use absolute button indexes unique with main template
|
|
if (!PCA9557PinUsed(GPIO_KEY1, index)) { return false; }
|
|
Pca9557.button_offset = 0;
|
|
}
|
|
XdrvMailbox.index = (PCA9557DigitalRead(PCA9557Pin(GPIO_KEY1, index)) != bitRead(Pca9557.button_inverted, index));
|
|
return true;
|
|
}
|
|
|
|
bool PCA9557AddSwitch(void) {
|
|
// XdrvMailbox.index = button/switch index
|
|
uint32_t index = XdrvMailbox.index;
|
|
if (!Pca9557.base) {
|
|
// Use relative and sequential switch indexes
|
|
if (Pca9557.switch_offset < 0) { Pca9557.switch_offset = index; }
|
|
index -= Pca9557.switch_offset;
|
|
if (index >= Pca9557.switch_max) { return false; }
|
|
} else {
|
|
// Use absolute switch indexes unique with main template
|
|
if (!PCA9557PinUsed(GPIO_SWT1, index)) { return false; }
|
|
Pca9557.switch_offset = 0;
|
|
}
|
|
XdrvMailbox.index = PCA9557DigitalRead(PCA9557Pin(GPIO_SWT1, index));
|
|
return true;
|
|
}
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xdrv69(uint32_t function) {
|
|
bool i2c_enabled = false;
|
|
i2c_enabled = I2cEnabled(XI2C_81);
|
|
if (!i2c_enabled) { return false; }
|
|
|
|
bool result = false;
|
|
|
|
if (FUNC_SETUP_RING2 == function) {
|
|
PCA9557ModuleInit();
|
|
} else if (Pca9557.max_devices) {
|
|
switch (function) {
|
|
case FUNC_EVERY_100_MSECOND:
|
|
if (Pca9557.button_max || Pca9557.switch_max) {
|
|
PCA9557ServiceInput();
|
|
}
|
|
break;
|
|
case FUNC_SET_POWER:
|
|
PCA9557Power();
|
|
break;
|
|
case FUNC_INIT:
|
|
PCA9557Init();
|
|
break;
|
|
case FUNC_ADD_BUTTON:
|
|
result = PCA9557AddButton();
|
|
break;
|
|
case FUNC_ADD_SWITCH:
|
|
result = PCA9557AddSwitch();
|
|
break;
|
|
case FUNC_ACTIVE:
|
|
result = true;
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_PCA9557_DRV
|
|
#endif // USE_I2C
|