mirror of https://github.com/arendst/Tasmota.git
145 lines
10 KiB
C
145 lines
10 KiB
C
/*********************************************************************************************\
|
|
* User specific configuration parameters
|
|
*
|
|
* ATTENTION: Changes to most PARAMETER defines will only override flash settings if you change
|
|
* define CFG_HOLDER.
|
|
* Most parameters can be changed online using commands via MQTT, WebConsole or serial
|
|
*
|
|
* Corresponding MQTT/Serial/Console commands in [brackets]
|
|
\*********************************************************************************************/
|
|
|
|
// -- Project -------------------------------------
|
|
#define PROJECT "sonoff" // PROJECT is used as the default topic delimiter and OTA file name
|
|
// As an IDE restriction it needs to be the same as the main .ino file
|
|
|
|
#define CFG_HOLDER 0x20161209 // [Reset 1] Change this value to load following default configuration parameters
|
|
#define SAVE_DATA 1 // [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)
|
|
#define SAVE_STATE 1 // [SaveState] Save changed power state to Flash (0 = disable, 1 = enable)
|
|
|
|
// -- Wifi ----------------------------------------
|
|
#define STA_SSID1 "indebuurt1" // [Ssid1] Wifi SSID
|
|
#define STA_PASS1 "VnsqrtnrsddbrN" // [Password1] Wifi password
|
|
#define STA_SSID2 "indebuurt2" // [Ssid2] Optional alternate AP Wifi SSID
|
|
#define STA_PASS2 "VnsqrtnrsddbrN" // [Password2] Optional alternate AP Wifi password
|
|
#define WIFI_HOSTNAME "%s-%04d" // [Hostname] Expands to <MQTT_TOPIC>-<last 4 decimal chars of MAC address>
|
|
#define WIFI_CONFIG_TOOL WIFI_WPSCONFIG // [WifiConfig] Default tool if wifi fails to connect
|
|
// (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY)
|
|
// -- Syslog --------------------------------------
|
|
#define SYS_LOG_HOST "domus1" // [LogHost] (Linux) syslog host
|
|
#define SYS_LOG_PORT 514 // [LogPort] default syslog UDP port
|
|
#define SYS_LOG_LEVEL LOG_LEVEL_NONE // [SysLog]
|
|
#define SERIAL_LOG_LEVEL LOG_LEVEL_INFO // [SerialLog]
|
|
#define WEB_LOG_LEVEL LOG_LEVEL_INFO // [WebLog]
|
|
|
|
// -- Ota -----------------------------------------
|
|
#define OTA_URL "http://domus1:80/api/arduino/" PROJECT ".ino.bin" // [OtaUrl]
|
|
|
|
// -- MQTT ----------------------------------------
|
|
#define MQTT_USE 1 // [Mqtt] Select default MQTT use (0 = Off, 1 = On)
|
|
// !!! TLS uses a LOT OF MEMORY (20k) so be careful to enable other options at the same time !!!
|
|
//#define USE_MQTT_TLS // EXPERIMENTAL Use TLS for MQTT connection (+53k code, +20k mem)
|
|
// Needs Fingerprint, TLS Port, UserId and Password
|
|
#ifdef USE_MQTT_TLS
|
|
#define MQTT_HOST "m20.cloudmqtt.com" // [MqttHost]
|
|
#define MQTT_FINGERPRINT "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint]
|
|
#define MQTT_PORT 20123 // [MqttPort] MQTT TLS port
|
|
#define MQTT_USER "cloudmqttuser" // [MqttUser] Mandatory user
|
|
#define MQTT_PASS "cloudmqttpassword" // [MqttPassword] Mandatory password
|
|
#else
|
|
#define MQTT_HOST "domus1" // [MqttHost]
|
|
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
|
|
#define MQTT_USER "DVES_USER" // [MqttUser] Optional user
|
|
#define MQTT_PASS "DVES_PASS" // [MqttPassword] Optional password
|
|
#endif
|
|
|
|
#define MQTT_CLIENT_ID "DVES_%06X" // [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address
|
|
|
|
#define SUB_PREFIX "cmnd" // Sonoff devices subscribe to:- SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC
|
|
#define PUB_PREFIX "stat" // Sonoff devices publish to:- PUB_PREFIX/MQTT_TOPIC
|
|
#define PUB_PREFIX2 "tele" // Sonoff devices publish telemetry data to:- PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER/LIGHT and TIME
|
|
// May be named the same as PUB_PREFIX
|
|
#define MQTT_TOPIC PROJECT // [Topic] (unique) MQTT device topic
|
|
#define MQTT_GRPTOPIC "sonoffs" // [GroupTopic] MQTT Group topic
|
|
#define MQTT_BUTTON_RETAIN 0 // [ButtonRetain] Button may send retain flag (0 = off, 1 = on)
|
|
#define MQTT_POWER_RETAIN 0 // [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)
|
|
#define MQTT_SWITCH_RETAIN 0 // [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)
|
|
|
|
#define MQTT_STATUS_OFF "OFF" // Command or Status result when turned off (needs to be a string like "0" or "Off")
|
|
#define MQTT_STATUS_ON "ON" // Command or Status result when turned on (needs to be a string like "1" or "On")
|
|
#define MQTT_CMND_TOGGLE "TOGGLE" // Command to send when toggling (needs to be a string like "2" or "Toggle")
|
|
|
|
// -- MQTT - Telemetry ----------------------------
|
|
#define TELE_PERIOD 300 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)
|
|
|
|
// -- MQTT - Domoticz -----------------------------
|
|
#define USE_DOMOTICZ // Enable Domoticz (+5k code, +0.3k mem) - Disable by //
|
|
#define DOMOTICZ_IN_TOPIC "domoticz/in" // [DomoticzInTopic]
|
|
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // [DomoticzOutTopic]
|
|
#define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
|
|
|
|
// -- HTTP ----------------------------------------
|
|
#define USE_WEBSERVER // Enable web server and wifi manager (+43k code, +2k mem) - Disable by //
|
|
#define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
|
|
#define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
|
|
#define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+11k code, +2k mem)
|
|
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo or Hue Bridge emulation (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
|
|
|
|
// -- mDNS ----------------------------------------
|
|
#define USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem)
|
|
#define WEBSERVER_ADVERTISE // Provide access to webserver by name <Hostname>.local/
|
|
#define MQTT_HOST_DISCOVERY // Find MQTT host server (overrides MQTT_HOST if found)
|
|
|
|
// -- Time - Up to three NTP servers in your region
|
|
#define NTP_SERVER1 "pool.ntp.org"
|
|
#define NTP_SERVER2 "nl.pool.ntp.org"
|
|
#define NTP_SERVER3 "0.nl.pool.ntp.org"
|
|
|
|
// -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes
|
|
#define TIME_DST Last, Sun, Mar, 2, +120 // Last sunday in march at 02:00 +120 minutes
|
|
|
|
// -- Time - Start Standard Time and timezone offset from UTC in minutes
|
|
#define TIME_STD Last, Sun, Oct, 3, +60 // Last sunday in october 02:00 +60 minutes
|
|
|
|
// -- Application ---------------------------------
|
|
#define APP_TIMEZONE 1 // [Timezone] +1 hour (Amsterdam) (-12 .. 12 = hours from UTC, 99 = use TIME_DST/TIME_STD)
|
|
#define APP_LEDSTATE LED_POWER // [LedState] Function of led (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)
|
|
#define APP_PULSETIME 0 // [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)
|
|
#define APP_POWERON_STATE 3 // [PowerOnState] Power On Relay state (0 = Off, 1 = On, 2 = Toggle Saved state, 3 = Saved state)
|
|
#define APP_BLINKTIME 10 // [BlinkTime] Time in 0.1 Sec to blink/toggle power for relay 1
|
|
#define APP_BLINKCOUNT 10 // [BlinkCount] Number of blinks (0 = 32000)
|
|
#define APP_SLEEP 0 // [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)
|
|
|
|
#define SWITCH_MODE TOGGLE // [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON or PUSHBUTTON_INV (the wall switch state)
|
|
#define WS2812_LEDS 30 // [Pixels] Number of WS2812 LEDs to start with
|
|
|
|
#define TEMP_CONVERSION 0 // Convert temperature to (0 = Celsius or 1 = Fahrenheit)
|
|
#define TEMP_RESOLUTION 1 // Maximum number of decimals (0 - 3) showing sensor Temperature
|
|
#define HUMIDITY_RESOLUTION 1 // Maximum number of decimals (0 - 3) showing sensor Humidity
|
|
#define PRESSURE_RESOLUTION 1 // Maximum number of decimals (0 - 3) showing sensor Pressure
|
|
|
|
// -- Sensor code selection -----------------------
|
|
//#define USE_DHT2 // Optional using Adafruit DHT library
|
|
//#define USE_DS18x20 // Optional using OneWire library for multiple DS18B20 and/or DS18S20
|
|
|
|
#define USE_I2C // I2C Support (+10k code, 0.2k mem)
|
|
#define USE_BH1750 // Add I2C code for BH1750 sensor
|
|
#define USE_BMP // Add I2C code for BMP/BME280 sensor
|
|
#define USE_HTU // Add I2C code for HTU21 sensor
|
|
|
|
#define USE_WS2812 // WS2812 Led string support (+8k code, +1k mem)
|
|
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial TXD) (+1k mem)
|
|
// When USE_WS2812_DMA is enabled expect Exceptions on Pow
|
|
|
|
/*********************************************************************************************\
|
|
* No user configurable items below
|
|
\*********************************************************************************************/
|
|
|
|
#if defined(USE_WEMO_EMULATION) && defined(USE_HUE_EMULATION)
|
|
#error "Select either USE_WEMO_EMULATION or USE_HUE_EMULATION"
|
|
#endif
|
|
|
|
#if (ARDUINO < 10610)
|
|
#error "This software is supported with Arduino IDE starting from 1.6.10 and ESP8266 Release 2.3.0"
|
|
#endif
|
|
|