mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_template.h

2671 lines
127 KiB
C
Raw Blame History

/*
tasmota_template.h - template settings for Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _TASMOTA_TEMPLATE_H_
#define _TASMOTA_TEMPLATE_H_
// User selectable GPIO functionality
// ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END
// Then add the same name(s) in a nice location in array kGpioNiceList
enum UserSelectablePins {
GPIO_NONE, // Not used
GPIO_KEY1, GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, // 4 x Button
GPIO_SWT1, GPIO_SWT1_NP, // 8 x User connected external switches
GPIO_REL1, GPIO_REL1_INV, // 8 x Relays
GPIO_LED1, GPIO_LED1_INV, // 4 x Leds
GPIO_CNTR1, GPIO_CNTR1_NP, // 4 x Counter
GPIO_PWM1, GPIO_PWM1_INV, // 5 x PWM
GPIO_BUZZER, GPIO_BUZZER_INV, // Buzzer
GPIO_LEDLNK, GPIO_LEDLNK_INV, // Link led
GPIO_I2C_SCL, GPIO_I2C_SDA, // Software I2C
GPIO_SPI_MISO, GPIO_SPI_MOSI, GPIO_SPI_CLK, GPIO_SPI_CS, GPIO_SPI_DC, // Hardware SPI
GPIO_SSPI_MISO, GPIO_SSPI_MOSI, GPIO_SSPI_SCLK, GPIO_SSPI_CS, GPIO_SSPI_DC, // Software SPI
GPIO_BACKLIGHT, // Display backlight control
GPIO_OLED_RESET, // OLED Display Reset
GPIO_IRSEND, GPIO_IRRECV, // IR interface
GPIO_RFSEND, GPIO_RFRECV, // RF interface
GPIO_DHT11, GPIO_DHT22, GPIO_SI7021, GPIO_DHT11_OUT, // DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
GPIO_DSB, GPIO_DSB_OUT, // DS18B20 or DS18S20
GPIO_WS2812, // WS2812 Led string
GPIO_MHZ_TXD, GPIO_MHZ_RXD, // MH-Z19 Serial interface
GPIO_PZEM0XX_TX, GPIO_PZEM004_RX, GPIO_PZEM016_RX, GPIO_PZEM017_RX, // PZEM Serial Modbus interface
GPIO_SAIR_TX, GPIO_SAIR_RX, // SenseAir Serial interface
GPIO_PMS5003_TX, GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface
GPIO_SDS0X1_TX, GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface
GPIO_SBR_TX, GPIO_SBR_RX, // Serial Bridge Serial interface
GPIO_SR04_TRIG, GPIO_SR04_ECHO, // SR04 interface
GPIO_SDM120_TX, GPIO_SDM120_RX, // SDM120 Serial interface
GPIO_SDM630_TX, GPIO_SDM630_RX, // SDM630 Serial interface
GPIO_TM16CLK, GPIO_TM16DIO, GPIO_TM16STB, // TM1638 interface
GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player
GPIO_HX711_SCK, GPIO_HX711_DAT, // HX711 Load Cell interface
GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin
GPIO_TUYA_TX, GPIO_TUYA_RX, // Tuya Serial interface
GPIO_MGC3130_XFER, GPIO_MGC3130_RESET, // MGC3130 interface
GPIO_RF_SENSOR, // Rf receiver with sensor decoding
GPIO_AZ_TXD, GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface
GPIO_MAX31855CS, GPIO_MAX31855CLK, GPIO_MAX31855DO, // MAX31855 Serial interface
GPIO_NRG_SEL, GPIO_NRG_SEL_INV, GPIO_NRG_CF1, GPIO_HLW_CF, GPIO_HJL_CF, // HLW8012/HJL-01/BL0937 energy monitoring
GPIO_MCP39F5_TX, GPIO_MCP39F5_RX, GPIO_MCP39F5_RST, // MCP39F501 Energy monitoring (Shelly2)
GPIO_PN532_TXD, GPIO_PN532_RXD, // PN532 NFC Serial interface
GPIO_SM16716_CLK, GPIO_SM16716_DAT, GPIO_SM16716_SEL, // SM16716 SELECT
GPIO_DI, GPIO_DCKI, // my92x1 PWM controller
GPIO_CSE7766_TX, GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2)
GPIO_ARIRFRCV, GPIO_ARIRFSEL, // Arilux RF Receive input
GPIO_TXD, GPIO_RXD, // Serial interface
GPIO_ROT1A, GPIO_ROT1B, // Rotary switch
GPIO_ADC_JOY, // Analog joystick
GPIO_SSPI_MAX31865_CS1, // MAX31865 Chip Select
GPIO_HRE_CLOCK, GPIO_HRE_DATA, // HR-E Water Meter
GPIO_ADE7953_IRQ, // ADE7953 IRQ
GPIO_SOLAXX1_TX, GPIO_SOLAXX1_RX, // Solax Inverter Serial interface
GPIO_ZIGBEE_TX, GPIO_ZIGBEE_RX, // Zigbee Serial interface
GPIO_RDM6300_RX, // RDM6300 RX
GPIO_IBEACON_TX, GPIO_IBEACON_RX, // HM17 IBEACON Serial interface
GPIO_A4988_DIR, GPIO_A4988_STP, GPIO_A4988_ENA, GPIO_A4988_MS1, // A4988 interface
GPIO_OUTPUT_HI, GPIO_OUTPUT_LO, // Fixed output state
GPIO_DDS2382_TX, GPIO_DDS2382_RX, // DDS2382 Serial interface
GPIO_DDSU666_TX, GPIO_DDSU666_RX, // DDSU666 Serial interface
GPIO_SM2135_CLK, GPIO_SM2135_DAT, // SM2135 PWM controller
GPIO_DEEPSLEEP, // Kill switch for deepsleep
GPIO_EXS_ENABLE, // EXS MCU Enable
GPIO_TASMOTACLIENT_TXD, GPIO_TASMOTACLIENT_RXD, // Client Serial interface
GPIO_TASMOTACLIENT_RST, GPIO_TASMOTACLIENT_RST_INV, // Client Reset
GPIO_HPMA_RX, GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
GPIO_GPS_RX, GPIO_GPS_TX, // GPS Serial interface
GPIO_HM10_RX, GPIO_HM10_TX, // HM10-BLE-Mijia-bridge Serial interface
GPIO_LE01MR_RX, GPIO_LE01MR_TX, // F&F LE-01MR energy meter
GPIO_CC1101_GDO0, GPIO_CC1101_GDO2, // CC1101 Serial interface
GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor
GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX
GPIO_AS3935, // Franklin Lightning Sensor
GPIO_ADC_INPUT, // Analog input
GPIO_ADC_TEMP, // Analog Thermistor
GPIO_ADC_LIGHT, // Analog Light sensor
GPIO_ADC_BUTTON, GPIO_ADC_BUTTON_INV, // Analog Button
GPIO_ADC_RANGE, // Analog Range
GPIO_ADC_CT_POWER, // ANalog Current
#ifdef ESP32
GPIO_WEBCAM_PWDN, GPIO_WEBCAM_RESET, GPIO_WEBCAM_XCLK, // Webcam
GPIO_WEBCAM_SIOD, GPIO_WEBCAM_SIOC, // Webcam I2C
GPIO_WEBCAM_DATA,
GPIO_WEBCAM_VSYNC, GPIO_WEBCAM_HREF, GPIO_WEBCAM_PCLK,
GPIO_WEBCAM_PSCLK,
GPIO_WEBCAM_HSD,
GPIO_WEBCAM_PSRCS,
#endif
GPIO_BOILER_OT_RX, GPIO_BOILER_OT_TX, // OpenTherm Boiler TX pin
GPIO_WINDMETER_SPEED, // WindMeter speed counter pin
GPIO_KEY1_TC, // Touch pin as button
GPIO_BL0940_RX, // BL0940 serial interface
GPIO_TCP_TX, GPIO_TCP_RX, // TCP to serial bridge
#ifdef ESP32
GPIO_ETH_PHY_POWER, GPIO_ETH_PHY_MDC, GPIO_ETH_PHY_MDIO, // Ethernet
#endif
GPIO_TELEINFO_RX, // Teleinfo telemetry data receive pin
GPIO_TELEINFO_ENABLE, // Teleinfo Enable Receive Pin
GPIO_LMT01, // LMT01 input counting pin
GPIO_IEM3000_TX, GPIO_IEM3000_RX, // IEM3000 Serial interface
GPIO_ZIGBEE_RST, // Zigbee reset
GPIO_DYP_RX,
GPIO_MIEL_HVAC_TX, GPIO_MIEL_HVAC_RX, // Mitsubishi Electric HVAC
GPIO_WE517_TX, GPIO_WE517_RX, // ORNO WE517 Serial interface
GPIO_AS608_TX, GPIO_AS608_RX, // Serial interface AS608 / R503
GPIO_SHELLY_DIMMER_BOOT0, GPIO_SHELLY_DIMMER_RST_INV,
GPIO_RC522_RST, // RC522 reset
GPIO_P9813_CLK, GPIO_P9813_DAT, // P9813 Clock and Data
GPIO_OPTION_A, // Specific device options to be served in code
GPIO_FTC532, // FTC532 touch ctrlr serial input
GPIO_RC522_CS,
GPIO_NRF24_CS, GPIO_NRF24_DC,
GPIO_ILI9341_CS, GPIO_ILI9341_DC,
GPIO_ILI9488_CS,
GPIO_EPAPER29_CS,
GPIO_EPAPER42_CS,
GPIO_SSD1351_CS,
GPIO_RA8876_CS,
GPIO_ST7789_CS, GPIO_ST7789_DC,
GPIO_SSD1331_CS, GPIO_SSD1331_DC,
GPIO_SDCARD_CS,
GPIO_ROT1A_NP, GPIO_ROT1B_NP, // Rotary switch
GPIO_ADC_PH, // Analog PH Sensor
GPIO_BS814_CLK, GPIO_BS814_DAT, // Holtek BS814A2 touch ctrlr
GPIO_WIEGAND_D0, GPIO_WIEGAND_D1, // Wiegand Data lines
GPIO_NEOPOOL_TX, GPIO_NEOPOOL_RX, // Sugar Valley RS485 interface
GPIO_SDM72_TX, GPIO_SDM72_RX, // SDM72 Serial interface
GPIO_TM1637CLK, GPIO_TM1637DIO, // TM1637 interface
GPIO_TM1638CLK, GPIO_TM1638DIO, GPIO_TM1638STB, // TM1638 interface
GPIO_SENSOR_END };
enum ProgramSelectablePins {
GPIO_FIX_START = 2046,
GPIO_USER, // User configurable needs to be 2047
GPIO_MAX };
#define MAX_OPTIONS_A 2 // Increase if more bits are used from GpioOptionABits
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data; // Allow bit manipulation using SetOption
struct { // GPIO Option_A1 .. Option_A32
uint32_t pwm1_input : 1; // bit 0 (v9.2.0.1) - Option_A1 - (Light) Change PWM1 to input on power off and no fade running (1)
uint32_t spare01 : 1; // bit 1
uint32_t spare02 : 1; // bit 2
uint32_t spare03 : 1; // bit 3
uint32_t spare04 : 1; // bit 4
uint32_t spare05 : 1; // bit 5
uint32_t spare06 : 1; // bit 6
uint32_t spare07 : 1; // bit 7
uint32_t spare08 : 1; // bit 8
uint32_t spare09 : 1; // bit 9
uint32_t spare10 : 1; // bit 10
uint32_t spare11 : 1; // bit 11
uint32_t spare12 : 1; // bit 12
uint32_t spare13 : 1; // bit 13
uint32_t spare14 : 1; // bit 14
uint32_t spare15 : 1; // bit 15
uint32_t spare16 : 1; // bit 16
uint32_t spare17 : 1; // bit 17
uint32_t spare18 : 1; // bit 18
uint32_t spare19 : 1; // bit 19
uint32_t spare20 : 1; // bit 20
uint32_t spare21 : 1; // bit 21
uint32_t spare22 : 1; // bit 22
uint32_t spare23 : 1; // bit 23
uint32_t spare24 : 1; // bit 24
uint32_t spare25 : 1; // bit 25
uint32_t spare26 : 1; // bit 26
uint32_t spare27 : 1; // bit 27
uint32_t spare28 : 1; // bit 28
uint32_t spare29 : 1; // bit 29
uint32_t spare30 : 1; // bit 30
uint32_t spare31 : 1; // bit 31
};
} GpioOptionABits;
// Text in webpage Module Parameters and commands GPIOS and GPIO
const char kSensorNames[] PROGMEM =
D_SENSOR_NONE "|"
D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "_n|" D_SENSOR_BUTTON "_i|" D_SENSOR_BUTTON "_in|"
D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "_n|"
D_SENSOR_RELAY "|" D_SENSOR_RELAY "_i|"
D_SENSOR_LED "|" D_SENSOR_LED "_i|"
D_SENSOR_COUNTER "|" D_SENSOR_COUNTER "_n|"
D_SENSOR_PWM "|" D_SENSOR_PWM "_i|"
D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "_i|"
D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "_i|"
D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|"
D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|"
D_SENSOR_BACKLIGHT "|" D_SENSOR_OLED_RESET "|"
D_SENSOR_IRSEND "|" D_SENSOR_IRRECV "|"
D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|"
D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DHT11 "_o|"
D_SENSOR_DS18X20 "|" D_SENSOR_DS18X20 "_o|"
D_SENSOR_WS2812 "|"
D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|"
D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
D_SENSOR_PMS5003_TX "|" D_SENSOR_PMS5003_RX "|"
D_SENSOR_SDS0X1_TX "|" D_SENSOR_SDS0X1_RX "|"
D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|"
D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|"
D_SENSOR_DFR562 "|"
D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|"
D_SENSOR_TX2X_TX "|"
D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|"
D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|"
D_SENSOR_RF_SENSOR "|"
D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|"
D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|"
D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "_i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|"
D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|"
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|"
D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|"
D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|"
D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|"
D_SENSOR_ARIRFRCV "|" D_SENSOR_ARIRFSEL "|"
D_SENSOR_TXD "|" D_SENSOR_RXD "|"
D_SENSOR_ROTARY " A|" D_SENSOR_ROTARY " B|"
D_SENSOR_ADC_JOYSTICK "|"
D_SENSOR_MAX31865_CS "|"
D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|"
D_SENSOR_ADE7953_IRQ "|"
D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|"
D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|"
D_SENSOR_RDM6300_RX "|"
D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|"
D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|"
D_SENSOR_OUTPUT_HI "|" D_SENSOR_OUTPUT_LO "|"
D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|"
D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|"
D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|"
D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|"
D_SENSOR_CLIENT_TX "|" D_SENSOR_CLIENT_RX "|" D_SENSOR_CLIENT_RESET "|" D_SENSOR_CLIENT_RESET "_i|"
D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|"
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|"
D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|"
D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|"
D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|"
D_SENSOR_HRXL_RX "|"
D_SENSOR_ELECTRIQ_MOODL "|"
D_SENSOR_AS3935 "|"
D_SENSOR_ADC_INPUT "|"
D_SENSOR_ADC_TEMP "|"
D_SENSOR_ADC_LIGHT "|"
D_SENSOR_ADC_BUTTON "|" D_SENSOR_ADC_BUTTON "_i|"
D_SENSOR_ADC_RANGE "|"
D_SENSOR_ADC_CT_POWER "|"
#ifdef ESP32
D_GPIO_WEBCAM_PWDN "|" D_GPIO_WEBCAM_RESET "|" D_GPIO_WEBCAM_XCLK "|"
D_GPIO_WEBCAM_SIOD "|" D_GPIO_WEBCAM_SIOC "|"
D_GPIO_WEBCAM_DATA "|"
D_GPIO_WEBCAM_VSYNC "|" D_GPIO_WEBCAM_HREF "|" D_GPIO_WEBCAM_PCLK "|"
D_GPIO_WEBCAM_PSCLK "|"
D_GPIO_WEBCAM_HSD "|"
D_GPIO_WEBCAM_PSRCS "|"
#endif
D_SENSOR_BOILER_OT_RX "|" D_SENSOR_BOILER_OT_TX "|"
D_SENSOR_WINDMETER_SPEED "|" D_SENSOR_BUTTON "_tc|"
D_SENSOR_BL0940_RX "|"
D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|"
#ifdef ESP32
D_SENSOR_ETH_PHY_POWER "|" D_SENSOR_ETH_PHY_MDC "|" D_SENSOR_ETH_PHY_MDIO "|"
#endif
D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE "|"
D_SENSOR_LMT01_PULSE "|"
D_SENSOR_IEM3000_TX "|" D_SENSOR_IEM3000_RX "|"
D_SENSOR_ZIGBEE_RST "|"
D_SENSOR_DYP_RX "|"
D_SENSOR_MIEL_HVAC_TX "|" D_SENSOR_MIEL_HVAC_RX "|"
D_SENSOR_WE517_TX "|" D_SENSOR_WE517_RX "|"
D_SENSOR_AS608_TX "|" D_SENSOR_AS608_RX "|"
D_SENSOR_SHELLY_DIMMER_BOOT0 "|" D_SENSOR_SHELLY_DIMMER_RST_INV "|"
D_SENSOR_RC522_RST "|"
D_SENSOR_P9813_CLK "|" D_SENSOR_P9813_DAT "|"
D_SENSOR_OPTION " A|"
D_SENSOR_FTC532 "|"
D_SENSOR_RC522_CS "|"
D_SENSOR_NRF24_CS "|" D_SENSOR_NRF24_DC "|"
D_SENSOR_ILI9341_CS "|" D_SENSOR_ILI9341_DC "|"
D_SENSOR_ILI9488_CS "|"
D_SENSOR_EPAPER29_CS "|"
D_SENSOR_EPAPER42_CS "|"
D_SENSOR_SSD1351_CS "|"
D_SENSOR_RA8876_CS "|"
D_SENSOR_ST7789_CS "|" D_SENSOR_ST7789_DC "|"
D_SENSOR_SSD1331_CS "|" D_SENSOR_SSD1331_DC "|"
D_SENSOR_SDCARD_CS "|"
D_SENSOR_ROTARY " A_n|" D_SENSOR_ROTARY " B_n|"
D_SENSOR_ADC_PH "|"
D_SENSOR_BS814_CLK "|" D_SENSOR_BS814_DAT "|"
D_SENSOR_WIEGAND_D0 "|" D_SENSOR_WIEGAND_D1 "|"
D_SENSOR_NEOPOOL_TX "|" D_SENSOR_NEOPOOL_RX "|"
D_SENSOR_SDM72_TX "|" D_SENSOR_SDM72_RX "|"
D_SENSOR_TM1637_CLK "|" D_SENSOR_TM1637_DIO "|"
D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|"
;
const char kSensorNamesFixed[] PROGMEM =
D_SENSOR_USER;
#define MAX_MAX31865S 6
#define MAX_A4988_MSS 3
#define MAX_WEBCAM_DATA 8
#define MAX_WEBCAM_HSD 3
#define MAX_SM2135_DAT 6
const uint16_t kGpioNiceList[] PROGMEM = {
GPIO_NONE, // Not used
AGPIO(GPIO_OPTION_A) + MAX_OPTIONS_A, // Device specific options
AGPIO(GPIO_KEY1) + MAX_KEYS, // Buttons
AGPIO(GPIO_KEY1_NP) + MAX_KEYS,
AGPIO(GPIO_KEY1_INV) + MAX_KEYS,
AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS,
AGPIO(GPIO_KEY1_TC) + MAX_KEYS, // Touch button
AGPIO(GPIO_SWT1) + MAX_SWITCHES, // User connected external switches
AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES,
#ifdef ROTARY_V1
AGPIO(GPIO_ROT1A) + MAX_ROTARIES, // Rotary A Pin
AGPIO(GPIO_ROT1B) + MAX_ROTARIES, // Rotary B Pin
AGPIO(GPIO_ROT1A_NP) + MAX_ROTARIES, // Rotary A Pin No Pullup
AGPIO(GPIO_ROT1B_NP) + MAX_ROTARIES, // Rotary B Pin No Pullup
#endif
AGPIO(GPIO_REL1) + MAX_RELAYS, // Relays
AGPIO(GPIO_REL1_INV) + MAX_RELAYS,
AGPIO(GPIO_LED1) + MAX_LEDS, // Leds
AGPIO(GPIO_LED1_INV) + MAX_LEDS,
#ifdef USE_COUNTER
AGPIO(GPIO_CNTR1) + MAX_COUNTERS, // Counters
AGPIO(GPIO_CNTR1_NP) + MAX_COUNTERS,
#endif
AGPIO(GPIO_PWM1) + MAX_PWMS, // RGB Red or C Cold White
AGPIO(GPIO_PWM1_INV) + MAX_PWMS,
#ifdef USE_BUZZER
AGPIO(GPIO_BUZZER), // Buzzer
AGPIO(GPIO_BUZZER_INV), // Inverted buzzer
#endif
AGPIO(GPIO_LEDLNK), // Link led
AGPIO(GPIO_LEDLNK_INV), // Inverted link led
AGPIO(GPIO_OUTPUT_HI), // Fixed output high
AGPIO(GPIO_OUTPUT_LO), // Fixed output low
#ifdef USE_FTC532
AGPIO(GPIO_FTC532), // FTC532 touch input
#endif
#ifdef USE_BS814A2
AGPIO(GPIO_BS814_CLK), // Holtek BS814A2 touch ctrlr
AGPIO(GPIO_BS814_DAT),
#endif
/*-------------------------------------------------------------------------------------------*\
* Protocol specifics
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_I2C
AGPIO(GPIO_I2C_SCL), // I2C SCL
AGPIO(GPIO_I2C_SDA), // I2C SDA
#endif
#ifdef USE_SPI
AGPIO(GPIO_SPI_MISO), // SPI MISO
AGPIO(GPIO_SPI_MOSI), // SPI MOSI
AGPIO(GPIO_SPI_CLK), // SPI Clk
AGPIO(GPIO_SPI_CS), // SPI Chip Select
AGPIO(GPIO_SPI_DC), // SPI Data Direction
#ifdef USE_NRF24
AGPIO(GPIO_NRF24_CS),
AGPIO(GPIO_NRF24_DC),
#endif
#ifdef USE_RC522
AGPIO(GPIO_RC522_CS), // RC522 Rfid Chip Select
AGPIO(GPIO_RC522_RST), // RC522 Rfid Reset
#endif
#ifdef USE_SDCARD
AGPIO(GPIO_SDCARD_CS),
#endif // USE_SDCARD
#endif // USE_SPI
AGPIO(GPIO_SSPI_MISO), // Software SPI Master Input Client Output
AGPIO(GPIO_SSPI_MOSI), // Software SPI Master Output Client Input
AGPIO(GPIO_SSPI_SCLK), // Software SPI Serial Clock
AGPIO(GPIO_SSPI_CS), // Software SPI Chip Select
AGPIO(GPIO_SSPI_DC), // Software SPI Data or Command
#ifdef USE_DISPLAY
#ifdef USE_DISPLAY_ILI9341
AGPIO(GPIO_ILI9341_CS),
AGPIO(GPIO_ILI9341_DC),
#endif // USE_DISPLAY_ILI9341
#ifdef USE_DISPLAY_ILI9488
AGPIO(GPIO_ILI9488_CS),
#endif // USE_DISPLAY_ILI9488
#ifdef USE_DISPLAY_EPAPER_29
AGPIO(GPIO_EPAPER29_CS),
#endif // USE_DISPLAY_EPAPER_29
#ifdef USE_DISPLAY_EPAPER_42
AGPIO(GPIO_EPAPER42_CS),
#endif // USE_DISPLAY_EPAPER_42
#ifdef USE_DISPLAY_SSD1351
AGPIO(GPIO_SSD1351_CS),
#endif // USE_DISPLAY_SSD1351
#ifdef USE_DISPLAY_RA8876
AGPIO(GPIO_RA8876_CS),
#endif // USE_DISPLAY_RA8876
#ifdef USE_DISPLAY_ST7789
AGPIO(GPIO_ST7789_CS),
AGPIO(GPIO_ST7789_DC),
#endif // USE_DISPLAY_ST7789
#ifdef USE_DISPLAY_SSD1331
AGPIO(GPIO_SSD1331_CS),
AGPIO(GPIO_SSD1331_DC),
#endif // USE_DISPLAY_SSD1331
#ifdef USE_DISPLAY_TM1637
AGPIO(GPIO_TM1637CLK),
AGPIO(GPIO_TM1637DIO),
AGPIO(GPIO_TM1638CLK),
AGPIO(GPIO_TM1638DIO),
AGPIO(GPIO_TM1638STB),
#endif // USE_DISPLAY_TM1637
AGPIO(GPIO_BACKLIGHT), // Display backlight control
AGPIO(GPIO_OLED_RESET), // OLED Display Reset
#endif // USE_DISPLAY
#ifdef USE_MAX31865
AGPIO(GPIO_SSPI_MAX31865_CS1) + MAX_MAX31865S,
#endif
AGPIO(GPIO_TXD), // Serial interface
AGPIO(GPIO_RXD), // Serial interface
/*-------------------------------------------------------------------------------------------*\
* Single wire sensors
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_DHT
AGPIO(GPIO_DHT11), // DHT11
AGPIO(GPIO_DHT22), // DHT21, DHT22, AM2301, AM2302, AM2321
AGPIO(GPIO_SI7021), // iTead SI7021
AGPIO(GPIO_DHT11_OUT), // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
#endif
#ifdef USE_DS18x20
AGPIO(GPIO_DSB), // Single wire DS18B20 or DS18S20
AGPIO(GPIO_DSB_OUT), // Pseudo Single wire DS18B20 or DS18S20
#endif
#ifdef USE_LMT01
AGPIO(GPIO_LMT01), // LMT01, count pulses on GPIO
#endif
/*-------------------------------------------------------------------------------------------*\
* Light
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_LIGHT
#ifdef USE_WS2812
#if (USE_WS2812_HARDWARE == NEO_HW_P9813)
AGPIO(GPIO_P9813_CLK), // P9813 CLOCK
AGPIO(GPIO_P9813_DAT), // P9813 DATA
#else
AGPIO(GPIO_WS2812), // WS2812 Led string
#endif // NEO_HW_P9813
#endif
#ifdef USE_ARILUX_RF
AGPIO(GPIO_ARIRFRCV), // AriLux RF Receive input
AGPIO(GPIO_ARIRFSEL), // Arilux RF Receive input selected
#endif
#ifdef USE_MY92X1
AGPIO(GPIO_DI), // my92x1 PWM input
AGPIO(GPIO_DCKI), // my92x1 CLK input
#endif // USE_MY92X1
#ifdef USE_SM16716
AGPIO(GPIO_SM16716_CLK), // SM16716 CLOCK
AGPIO(GPIO_SM16716_DAT), // SM16716 DATA
AGPIO(GPIO_SM16716_SEL), // SM16716 SELECT
#endif // USE_SM16716
#ifdef USE_SM2135
AGPIO(GPIO_SM2135_CLK), // SM2135 CLOCK
AGPIO(GPIO_SM2135_DAT) + MAX_SM2135_DAT, // SM2135 DATA
#endif // USE_SM2135
#ifdef USE_TUYA_MCU
AGPIO(GPIO_TUYA_TX), // Tuya Serial interface
AGPIO(GPIO_TUYA_RX), // Tuya Serial interface
#endif
#ifdef USE_EXS_DIMMER
AGPIO(GPIO_EXS_ENABLE), // EXS MCU Enable
#endif
#ifdef USE_ELECTRIQ_MOODL
AGPIO(GPIO_ELECTRIQ_MOODL_TX),
#endif
#ifdef USE_SHELLY_DIMMER
AGPIO(GPIO_SHELLY_DIMMER_BOOT0),
AGPIO(GPIO_SHELLY_DIMMER_RST_INV),
#endif
#endif // USE_LIGHT
/*-------------------------------------------------------------------------------------------*\
* Transmission sensors
\*-------------------------------------------------------------------------------------------*/
#if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL)
AGPIO(GPIO_IRSEND), // IR remote
#if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL)
AGPIO(GPIO_IRRECV), // IR receiver
#endif
#endif
#ifdef USE_RC_SWITCH
AGPIO(GPIO_RFSEND), // RF transmitter
AGPIO(GPIO_RFRECV), // RF receiver
#endif
#ifdef USE_RF_SENSOR
AGPIO(GPIO_RF_SENSOR), // Rf receiver with sensor decoding
#endif
#ifdef USE_SR04
AGPIO(GPIO_SR04_TRIG), // SR04 Tri/TXgger pin
AGPIO(GPIO_SR04_ECHO), // SR04 Ech/RXo pin
#endif
#ifdef USE_TM1638
AGPIO(GPIO_TM16CLK), // TM1638 Clock
AGPIO(GPIO_TM16DIO), // TM1638 Data I/O
AGPIO(GPIO_TM16STB), // TM1638 Strobe
#endif
#ifdef USE_HX711
AGPIO(GPIO_HX711_SCK), // HX711 Load Cell clock
AGPIO(GPIO_HX711_DAT), // HX711 Load Cell data
#endif
/*-------------------------------------------------------------------------------------------*\
* Energy sensors
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_ENERGY_SENSOR
#ifdef USE_HLW8012
AGPIO(GPIO_NRG_SEL), // HLW8012/HLJ-01 Sel output (1 = Voltage)
AGPIO(GPIO_NRG_SEL_INV), // HLW8012/HLJ-01 Sel output (0 = Voltage)
AGPIO(GPIO_NRG_CF1), // HLW8012/HLJ-01 CF1 voltage / current
AGPIO(GPIO_HLW_CF), // HLW8012 CF power
AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power
#endif
#if defined(USE_I2C) && defined(USE_ADE7953)
AGPIO(GPIO_ADE7953_IRQ), // ADE7953 IRQ
#endif
#ifdef USE_CSE7766
AGPIO(GPIO_CSE7766_TX), // CSE7766 Serial interface (S31 and Pow R2)
AGPIO(GPIO_CSE7766_RX), // CSE7766 Serial interface (S31 and Pow R2)
#endif
#ifdef USE_MCP39F501
AGPIO(GPIO_MCP39F5_TX), // MCP39F501 Serial interface (Shelly2)
AGPIO(GPIO_MCP39F5_RX), // MCP39F501 Serial interface (Shelly2)
AGPIO(GPIO_MCP39F5_RST), // MCP39F501 Reset (Shelly2)
#endif
#if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC)
AGPIO(GPIO_PZEM0XX_TX), // PZEM0XX Serial interface
#endif
#ifdef USE_PZEM004T
AGPIO(GPIO_PZEM004_RX), // PZEM004T Serial interface
#endif
#ifdef USE_PZEM_AC
AGPIO(GPIO_PZEM016_RX), // PZEM-014,016 Serial Modbus interface
#endif
#ifdef USE_PZEM_DC
AGPIO(GPIO_PZEM017_RX), // PZEM-003,017 Serial Modbus interface
#endif
#ifdef USE_SDM120
AGPIO(GPIO_SDM120_TX), // SDM120 Serial interface
AGPIO(GPIO_SDM120_RX), // SDM120 Serial interface
#endif
#ifdef USE_SDM630
AGPIO(GPIO_SDM630_TX), // SDM630 Serial interface
AGPIO(GPIO_SDM630_RX), // SDM630 Serial interface
#endif
#ifdef USE_DDS2382
AGPIO(GPIO_DDS2382_TX), // DDS2382 Serial interface
AGPIO(GPIO_DDS2382_RX), // DDS2382 Serial interface
#endif
#ifdef USE_DDSU666
AGPIO(GPIO_DDSU666_TX), // DDSU666 Serial interface
AGPIO(GPIO_DDSU666_RX), // DDSU666 Serial interface
#endif // USE_DDSU666
#ifdef USE_SOLAX_X1
AGPIO(GPIO_SOLAXX1_TX), // Solax Inverter tx pin
AGPIO(GPIO_SOLAXX1_RX), // Solax Inverter rx pin
#endif // USE_SOLAX_X1
#ifdef USE_LE01MR
AGPIO(GPIO_LE01MR_TX), // F7F LE-01MR energy meter tx pin
AGPIO(GPIO_LE01MR_RX), // F7F LE-01MR energy meter rx pin
#endif // IFDEF:USE_LE01MR
#ifdef USE_BL0940
AGPIO(GPIO_BL0940_RX), // BL0940 Serial interface
#endif
#ifdef USE_IEM3000
AGPIO(GPIO_IEM3000_TX), // IEM3000 Serial interface
AGPIO(GPIO_IEM3000_RX), // IEM3000 Serial interface
#endif
#ifdef USE_WE517
AGPIO(GPIO_WE517_TX), // WE517 Serial interface
AGPIO(GPIO_WE517_RX), // WE517 Serial interface
#endif
#ifdef USE_SDM72
AGPIO(GPIO_SDM72_TX), // SDM72 Serial interface
AGPIO(GPIO_SDM72_RX), // SDM72 Serial interface
#endif
#endif // USE_ENERGY_SENSOR
/*-------------------------------------------------------------------------------------------*\
* Serial sensors
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_SERIAL_BRIDGE
AGPIO(GPIO_SBR_TX), // Serial Bridge Serial interface
AGPIO(GPIO_SBR_RX), // Serial Bridge Serial interface
#endif
#ifdef USE_TCP_BRIDGE
AGPIO(GPIO_TCP_TX), // TCP Serial bridge
AGPIO(GPIO_TCP_RX), // TCP Serial bridge
#endif
#ifdef USE_ZIGBEE
AGPIO(GPIO_ZIGBEE_TX), // Zigbee Serial interface
AGPIO(GPIO_ZIGBEE_RX), // Zigbee Serial interface
AGPIO(GPIO_ZIGBEE_RST), // Zigbee reset
#endif
#ifdef USE_MHZ19
AGPIO(GPIO_MHZ_TXD), // MH-Z19 Serial interface
AGPIO(GPIO_MHZ_RXD), // MH-Z19 Serial interface
#endif
#ifdef USE_SENSEAIR
AGPIO(GPIO_SAIR_TX), // SenseAir Serial interface
AGPIO(GPIO_SAIR_RX), // SenseAir Serial interface
#endif
#ifdef USE_NOVA_SDS
AGPIO(GPIO_SDS0X1_TX), // Nova Fitness SDS011 Serial interface
AGPIO(GPIO_SDS0X1_RX), // Nova Fitness SDS011 Serial interface
#endif
#ifdef USE_HPMA
AGPIO(GPIO_HPMA_TX), // Honeywell HPMA115S0 Serial interface
AGPIO(GPIO_HPMA_RX), // Honeywell HPMA115S0 Serial interface
#endif
#ifdef USE_PMS5003
AGPIO(GPIO_PMS5003_TX), // Plantower PMS5003 Serial interface
AGPIO(GPIO_PMS5003_RX), // Plantower PMS5003 Serial interface
#endif
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR)
AGPIO(GPIO_TX2X_TXD_BLACK), // TX20/TX23 Transmission Pin
#endif
#ifdef USE_WINDMETER
AGPIO(GPIO_WINDMETER_SPEED),
#endif
#ifdef USE_MP3_PLAYER
AGPIO(GPIO_MP3_DFR562), // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface
#endif
#ifdef USE_AZ7798
AGPIO(GPIO_AZ_TXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
AGPIO(GPIO_AZ_RXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
#endif
#ifdef USE_PN532_HSU
AGPIO(GPIO_PN532_TXD), // PN532 HSU Tx
AGPIO(GPIO_PN532_RXD), // PN532 HSU Rx
#endif
#ifdef USE_TASMOTA_CLIENT
AGPIO(GPIO_TASMOTACLIENT_TXD), // Tasmota Client TX
AGPIO(GPIO_TASMOTACLIENT_RXD), // Tasmota Client RX
AGPIO(GPIO_TASMOTACLIENT_RST), // Tasmota Client Reset
AGPIO(GPIO_TASMOTACLIENT_RST_INV), // Tasmota Client Reset Inverted
#endif
#ifdef USE_RDM6300
AGPIO(GPIO_RDM6300_RX),
#endif
#ifdef USE_IBEACON
AGPIO(GPIO_IBEACON_TX),
AGPIO(GPIO_IBEACON_RX),
#endif
#ifdef USE_GPS
AGPIO(GPIO_GPS_TX), // GPS serial interface
AGPIO(GPIO_GPS_RX), // GPS serial interface
#endif
#ifdef USE_HM10
AGPIO(GPIO_HM10_TX), // GPS serial interface
AGPIO(GPIO_HM10_RX), // GPS serial interface
#endif
#ifdef USE_OPENTHERM
AGPIO(GPIO_BOILER_OT_TX),
AGPIO(GPIO_BOILER_OT_RX),
#endif
#ifdef USE_AS608
AGPIO(GPIO_AS608_TX),
AGPIO(GPIO_AS608_RX),
#endif
/*-------------------------------------------------------------------------------------------*\
* Other sensors
\*-------------------------------------------------------------------------------------------*/
#ifdef USE_MGC3130
AGPIO(GPIO_MGC3130_XFER),
AGPIO(GPIO_MGC3130_RESET),
#endif
#ifdef USE_MAX31855
AGPIO(GPIO_MAX31855CS), // MAX31855 Serial interface
AGPIO(GPIO_MAX31855CLK), // MAX31855 Serial interface
AGPIO(GPIO_MAX31855DO), // MAX31855 Serial interface
#endif
#ifdef USE_HRE
AGPIO(GPIO_HRE_CLOCK),
AGPIO(GPIO_HRE_DATA),
#endif
#ifdef USE_A4988_STEPPER
AGPIO(GPIO_A4988_DIR), // A4988 direction pin
AGPIO(GPIO_A4988_STP), // A4988 step pin
// folowing are not mandatory
AGPIO(GPIO_A4988_ENA), // A4988 enabled pin
AGPIO(GPIO_A4988_MS1) + MAX_A4988_MSS, // A4988 microstep pin1 to pin3
#endif
#ifdef USE_DEEPSLEEP
AGPIO(GPIO_DEEPSLEEP),
#endif
#ifdef USE_KEELOQ
AGPIO(GPIO_CC1101_GDO0), // CC1101 pin for RX
AGPIO(GPIO_CC1101_GDO2), // CC1101 pin for RX
#endif
#ifdef USE_HRXL
AGPIO(GPIO_HRXL_RX),
#endif
#ifdef USE_DYP
AGPIO(GPIO_DYP_RX),
#endif
#ifdef USE_AS3935
AGPIO(GPIO_AS3935), // AS3935 IRQ Pin
#endif
#ifdef USE_TELEINFO
AGPIO(GPIO_TELEINFO_RX),
AGPIO(GPIO_TELEINFO_ENABLE),
#endif
#ifdef USE_MIEL_HVAC
AGPIO(GPIO_MIEL_HVAC_TX), // Mitsubishi Electric HVAC TX pin
AGPIO(GPIO_MIEL_HVAC_RX), // Mitsubishi Electric HVAC RX pin
#endif
#ifdef USE_WIEGAND
AGPIO(GPIO_WIEGAND_D0), // Date line D0 of Wiegand devices
AGPIO(GPIO_WIEGAND_D1), // Date line D1 of Wiegand devices
#endif
#ifdef USE_NEOPOOL
AGPIO(GPIO_NEOPOOL_TX), // Sugar Valley RS485 Interface
AGPIO(GPIO_NEOPOOL_RX), // Sugar Valley RS485 Interface
#endif
/*-------------------------------------------------------------------------------------------*\
* ESP32 specifics
\*-------------------------------------------------------------------------------------------*/
#ifdef ESP32
#ifdef USE_WEBCAM
AGPIO(GPIO_WEBCAM_PWDN),
AGPIO(GPIO_WEBCAM_RESET),
AGPIO(GPIO_WEBCAM_XCLK),
AGPIO(GPIO_WEBCAM_SIOD),
AGPIO(GPIO_WEBCAM_SIOC),
AGPIO(GPIO_WEBCAM_DATA) + MAX_WEBCAM_DATA,
AGPIO(GPIO_WEBCAM_VSYNC),
AGPIO(GPIO_WEBCAM_HREF),
AGPIO(GPIO_WEBCAM_PCLK),
AGPIO(GPIO_WEBCAM_PSCLK),
AGPIO(GPIO_WEBCAM_HSD) + MAX_WEBCAM_HSD,
AGPIO(GPIO_WEBCAM_PSRCS),
#endif // USE_WEBCAM
#ifdef USE_ETHERNET
AGPIO(GPIO_ETH_PHY_POWER),
AGPIO(GPIO_ETH_PHY_MDC),
AGPIO(GPIO_ETH_PHY_MDIO), // Ethernet
#endif // USE_ETHERNET
/*-------------------------------------------------------------------------------------------*\
* ESP32 multiple Analog / Digital converter inputs
\*-------------------------------------------------------------------------------------------*/
AGPIO(GPIO_ADC_INPUT) + MAX_ADCS, // Analog inputs
AGPIO(GPIO_ADC_TEMP) + MAX_ADCS, // Thermistor
AGPIO(GPIO_ADC_LIGHT) + MAX_ADCS, // Light sensor
AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button
AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS,
AGPIO(GPIO_ADC_RANGE) + MAX_ADCS, // Range
AGPIO(GPIO_ADC_CT_POWER) + MAX_ADCS, // Current
AGPIO(GPIO_ADC_JOY) + MAX_ADCS, // Joystick
AGPIO(GPIO_ADC_PH) + MAX_ADCS, // Analog PH Sensor
#endif // ESP32
};
/*-------------------------------------------------------------------------------------------*\
* ESP8266 single Analog / Digital converter input
\*-------------------------------------------------------------------------------------------*/
#ifdef ESP8266
const uint16_t kAdcNiceList[] PROGMEM = {
GPIO_NONE, // Not used
AGPIO(GPIO_ADC_INPUT), // Analog inputs
AGPIO(GPIO_ADC_TEMP), // Thermistor
AGPIO(GPIO_ADC_LIGHT), // Light sensor
AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button
AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS,
AGPIO(GPIO_ADC_RANGE), // Range
AGPIO(GPIO_ADC_CT_POWER), // Current
AGPIO(GPIO_ADC_JOY), // Joystick
AGPIO(GPIO_ADC_PH), // Analog PH Sensor
};
#endif // ESP8266
// User selectable ADC functionality
enum UserSelectableAdc {
ADC_NONE, // Not used
ADC_INPUT, // Analog input
ADC_TEMP, // Thermistor
ADC_LIGHT, // Light sensor
ADC_BUTTON, // Button
ADC_BUTTON_INV,
ADC_RANGE, // Range
ADC_CT_POWER, // Current
ADC_JOY, // Joystick
ADC_PH, // Analog PH Sensor
// ADC_SWITCH, // Switch
// ADC_SWITCH_INV,
ADC_END };
/*********************************************************************************************\
* ATTENTION: No user changeable features beyond this point - do not add templates !!!
\*********************************************************************************************/
#define GPIO_ANY 32 // Any GPIO
#ifdef ESP8266
#define MAX_GPI8_PIN 17 // Number of supported GPIO (0..16)
#define FLASH_PINS 6 // Number of flash chip pins
#define MAX_GPIO_PIN 18 // Number of supported GPIO (0..16 + ADC0)
#define ADC0_PIN 17 // Pin number of ADC0
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
#define MAX_USER_PINS 14 // MAX_GPIO_PIN - MIN_FLASH_PINS
#define WEMOS_MODULE 17 // Wemos module
const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcFLFLolD6D7D5D8D0A0";
typedef struct MYIO8 {
uint8_t io[MAX_GPI8_PIN];
} myio8; // 17 bytes
typedef struct MYCFGIO8285 {
uint8_t io[MAX_GPI8_PIN - MIN_FLASH_PINS];
} mycfgio8285; // 13 bytes
typedef struct MYTMPLT8285 {
mycfgio8285 gp;
uint8_t flag;
} mytmplt8285; // 14 bytes
typedef struct MYCFGIO8266 {
uint8_t io[MAX_GPI8_PIN - FLASH_PINS];
} mycfgio8266; // 11 bytes
typedef struct MYTMPLT8266 {
mycfgio8266 gp;
uint8_t flag;
} mytmplt8266; // 12 bytes
#endif // ESP8266
#ifdef ESP32
#define MAX_GPIO_PIN 40 // Number of supported GPIO
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
#define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS
#define WEMOS_MODULE 0 // Wemos module
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839
const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOflashcFLFLolIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOAOAOIAIAIAIAIAIA";
#endif // ESP32
//********************************************************************************************
typedef struct MYIO {
uint16_t io[MAX_GPIO_PIN];
} myio; // 18 * 2 = 36 bytes / 40 * 2 = 80 bytes
typedef struct MYCFGIO {
uint16_t io[MAX_USER_PINS];
} mycfgio; // 14 * 2 = 28 bytes / 36 * 2 = 72 bytes
#define GPIO_FLAG_USED 0 // Currently no flags used
typedef union {
uint16_t data;
struct {
uint16_t spare00 : 1;
uint16_t spare01 : 1;
uint16_t spare02 : 1;
uint16_t spare03 : 1;
uint16_t spare04 : 1;
uint16_t spare05 : 1;
uint16_t spare06 : 1;
uint16_t spare07 : 1;
uint16_t spare08 : 1;
uint16_t spare09 : 1;
uint16_t spare10 : 1;
uint16_t spare11 : 1;
uint16_t spare12 : 1;
uint16_t spare13 : 1;
uint16_t spare14 : 1;
uint16_t spare15 : 1;
};
} gpio_flag; // 2 bytes
typedef struct MYTMPLT {
mycfgio gp; // 28 / 72 bytes
gpio_flag flag; // 2 bytes
} mytmplt; // 30 / 74 bytes
//********************************************************************************************
#ifdef ESP8266
#include "tasmota_template_legacy.h"
/********************************************************************************************\
* ESP8266 Module Templates
\********************************************************************************************/
#define USER_MODULE 255
// Supported hardware modules
enum SupportedModules {
SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_S2X, SLAMPHER, SONOFF_TOUCH,
SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS, SONOFF_DEV, H801,
SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13,
SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06,
SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH,
OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4,
OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1,
SONOFF_IFAN03, EXS_DIMMER, PWM_DIMMER, SONOFF_D1, SONOFF_ZB_BRIDGE,
MAXMODULE };
const char kModuleNames[] PROGMEM =
"Sonoff Basic|Sonoff RF|Sonoff SV|Sonoff TH|Sonoff Dual|Sonoff Pow|Sonoff 4CH|Sonoff S2X|Slampher|Sonoff Touch|"
"Sonoff LED|1 Channel|4 Channel|Motor C/AC|ElectroDragon|EXS Relay(s)|WiOn|Generic|Sonoff Dev|H801|"
"Sonoff SC|Sonoff BN-SZ|Sonoff 4CH Pro|Huafan SS|Sonoff Bridge|Sonoff B1|AiLight|Sonoff T1 1CH|Sonoff T1 2CH|Sonoff T1 3CH|"
"Supla Espablo|Witty Cloud|Yunshan Relay|MagicHome|Luani HVIO|KMC 70011|Arilux LC01|Arilux LC11|Sonoff Dual R2|Arilux LC06|"
"Sonoff S31|Zengge WF017|Sonoff Pow R2|Sonoff iFan02|BlitzWolf SHP|Shelly 1|Shelly 2|Xiaomi Philips|Neo Coolcam|ESP Switch|"
"OBI Socket|Teckin|AplicWDP303075|Tuya MCU|Gosund SP1 v23|ARMTR Dimmer|SK03 Outdoor|PS-16-DZ|Teckin US|Manzoku strip|"
"OBI Socket 2|YTF IR Bridge|Digoo DG-SP202|KA10|Luminea ZX2820|Mi Desk Lamp|SP10|WAGA CHCZ02MB|SYF05|Sonoff L1|"
"Sonoff iFan03|EXS Dimmer|PWM Dimmer|Sonoff D1|Sonoff ZbBridge"
;
const uint8_t kModuleNiceList[] PROGMEM = {
SONOFF_BASIC, // Sonoff Relay Devices
SONOFF_RF,
SONOFF_TH,
SONOFF_DUAL,
SONOFF_DUAL_R2,
SONOFF_POW,
SONOFF_POW_R2,
SONOFF_4CH,
SONOFF_4CHPRO,
SONOFF_S31, // Sonoff Socket Relay Devices with Energy Monitoring
SONOFF_S2X, // Sonoff Socket Relay Devices
SONOFF_TOUCH, // Sonoff Switch Devices
SONOFF_T11,
SONOFF_T12,
SONOFF_T13,
#ifdef USE_SONOFF_D1
SONOFF_D1, // Sonoff D1
#endif
SONOFF_LED, // Sonoff Light Devices
SONOFF_BN,
#ifdef USE_SONOFF_L1
SONOFF_L1,
#endif
SONOFF_B1, // Sonoff Light Bulbs
SLAMPHER,
#ifdef USE_SONOFF_SC
SONOFF_SC, // Sonoff Environmemtal Sensor
#endif
#ifdef USE_SONOFF_IFAN
SONOFF_IFAN02, // Sonoff Fan
SONOFF_IFAN03,
#endif
#ifdef USE_SONOFF_RF
SONOFF_BRIDGE, // Sonoff Bridge
#endif
#ifdef USE_ZIGBEE_EZSP
SONOFF_ZB_BRIDGE,
#endif
SONOFF_SV, // Sonoff Development Devices
SONOFF_DEV,
CH1, // Relay Devices
CH4,
MOTOR,
ELECTRODRAGON,
EXS_RELAY,
SUPLA1,
LUANIHVIO,
YUNSHAN,
WION,
SHELLY1,
SHELLY2,
BLITZWOLF_BWSHP, // Socket Relay Devices with Energy Monitoring
TECKIN,
TECKIN_US,
APLIC_WDP303075,
GOSUND,
ZX2820,
SK03_TUYA,
DIGOO,
KA10,
SP10,
WAGA,
NEO_COOLCAM, // Socket Relay Devices
OBI,
OBI2,
MANZOKU_EU_4,
ESP_SWITCH, // Switch Devices
#ifdef USE_TUYA_MCU
TUYA_DIMMER, // Dimmer Devices
#endif
#ifdef USE_ARMTRONIX_DIMMERS
ARMTRONIX_DIMMERS,
#endif
#ifdef USE_PS_16_DZ
PS_16_DZ,
#endif
#ifdef USE_EXS_DIMMER
EXS_DIMMER,
#endif
#ifdef USE_PWM_DIMMER
PWM_DIMMER,
#endif
H801, // Light Devices
MAGICHOME,
ARILUX_LC01,
ARILUX_LC06,
ARILUX_LC11,
ZENGGE_ZF_WF017,
HUAFAN_SS,
#ifdef ROTARY_V1
MI_DESK_LAMP,
#endif
KMC_70011,
AILIGHT, // Light Bulbs
PHILIPS,
SYF05,
YTF_IR_BRIDGE,
WITTY, // Development Devices
WEMOS
};
enum SupportedTemplates8285 {
TMP_SONOFF_BASIC, TMP_SONOFF_SV, TMP_SONOFF_DUAL, TMP_SONOFF_POW, TMP_SONOFF_LED, TMP_ELECTRODRAGON,
TMP_EXS_RELAY, TMP_WION, TMP_SONOFF_DEV, TMP_H801, TMP_SONOFF_SC, TMP_SONOFF_BN, TMP_HUAFAN_SS, TMP_SONOFF_BRIDGE,
TMP_SONOFF_B1, TMP_AILIGHT, TMP_SONOFF_T11, TMP_SUPLA1, TMP_WITTY, TMP_YUNSHAN, TMP_MAGICHOME,
TMP_LUANIHVIO, TMP_KMC_70011, TMP_ARILUX_LC01, TMP_ARILUX_LC11, TMP_ARILUX_LC06, TMP_ZENGGE_ZF_WF017,
TMP_SONOFF_POW_R2, TMP_BLITZWOLF_BWSHP, TMP_SHELLY1, TMP_SHELLY2, TMP_PHILIPS, TMP_NEO_COOLCAM, TMP_ESP_SWITCH, TMP_OBI,
TMP_TECKIN, TMP_APLIC_WDP303075, TMP_TUYA_DIMMER, TMP_GOSUND, TMP_ARMTRONIX_DIMMERS, TMP_SK03_TUYA, TMP_PS_16_DZ,
TMP_TECKIN_US, TMP_MANZOKU_EU_4, TMP_OBI2, TMP_YTF_IR_BRIDGE, TMP_DIGOO, TMP_KA10, TMP_ZX2820, TMP_MI_DESK_LAMP, TMP_SP10,
TMP_WAGA, TMP_SYF05, TMP_EXS_DIMMER, TMP_PWM_DIMMER, TMP_SONOFF_ZB_BRIDGE,
TMP_MAXMODULE_8285 };
enum SupportedTemplates8266 {
TMP_WEMOS = TMP_MAXMODULE_8285, TMP_SONOFF_4CH, TMP_SONOFF_T12, TMP_SONOFF_T13, TMP_SONOFF_DUAL_R2, TMP_SONOFF_IFAN03,
TMP_MAXMODULE_8266 };
const uint8_t kModuleTemplateList[MAXMODULE] PROGMEM = {
TMP_SONOFF_BASIC,
TMP_SONOFF_BASIC, // SONOFF_RF
TMP_SONOFF_SV,
TMP_SONOFF_BASIC, // SONOFF_TH
TMP_SONOFF_DUAL,
TMP_SONOFF_POW,
TMP_SONOFF_4CH,
TMP_SONOFF_BASIC, // SONOFF_S2X
TMP_SONOFF_BASIC, // SLAMPHER
TMP_SONOFF_T11, // SONOFF_TOUCH
TMP_SONOFF_LED,
TMP_SONOFF_BASIC, // CH1
TMP_SONOFF_DUAL, // CH4
TMP_SONOFF_BASIC, // MOTOR
TMP_ELECTRODRAGON,
TMP_EXS_RELAY,
TMP_WION,
TMP_WEMOS,
TMP_SONOFF_DEV,
TMP_H801,
TMP_SONOFF_SC,
TMP_SONOFF_BN,
TMP_SONOFF_4CH, // SONOFF_4CHPRO
TMP_HUAFAN_SS,
TMP_SONOFF_BRIDGE,
TMP_SONOFF_B1,
TMP_AILIGHT,
TMP_SONOFF_T11,
TMP_SONOFF_T12,
TMP_SONOFF_T13,
TMP_SUPLA1,
TMP_WITTY,
TMP_YUNSHAN,
TMP_MAGICHOME,
TMP_LUANIHVIO,
TMP_KMC_70011,
TMP_ARILUX_LC01,
TMP_ARILUX_LC11,
TMP_SONOFF_DUAL_R2,
TMP_ARILUX_LC06,
TMP_SONOFF_POW_R2, // SONOFF_S31
TMP_ZENGGE_ZF_WF017,
TMP_SONOFF_POW_R2,
TMP_SONOFF_4CH, // SONOFF_IFAN02
TMP_BLITZWOLF_BWSHP,
TMP_SHELLY1,
TMP_SHELLY2,
TMP_PHILIPS,
TMP_NEO_COOLCAM,
TMP_ESP_SWITCH,
TMP_OBI,
TMP_TECKIN,
TMP_APLIC_WDP303075,
TMP_TUYA_DIMMER,
TMP_GOSUND,
TMP_ARMTRONIX_DIMMERS,
TMP_SK03_TUYA,
TMP_PS_16_DZ,
TMP_TECKIN_US,
TMP_MANZOKU_EU_4,
TMP_OBI2,
TMP_YTF_IR_BRIDGE,
TMP_DIGOO,
TMP_KA10,
TMP_ZX2820,
TMP_MI_DESK_LAMP,
TMP_SP10,
TMP_WAGA,
TMP_SYF05,
TMP_SONOFF_DUAL, // SONOFF_L1
TMP_SONOFF_IFAN03,
TMP_EXS_DIMMER,
TMP_PWM_DIMMER,
TMP_SONOFF_DUAL, // SONOFF_D1
TMP_SONOFF_ZB_BRIDGE,
};
/*********************************************************************************************\
* Templates with 12 usable pins (ESP8266)
\*********************************************************************************************/
const mytmplt8266 kModules8266[TMP_MAXMODULE_8285] PROGMEM = {
{ // SONOFF_BASIC - Sonoff Basic (ESP8266)
GPI8_KEY1, // GPIO00 Button
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Only available on newer Sonoff Basic R2 V1
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_USER, // GPIO04 Optional sensor
0, // GPIO05
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
GPI8_USER, // GPIO14 Optional sensor
0, // GPIO15
0, // GPIO16
0 // ADC0 Analog input
},
{ // SONOFF_SV - Sonoff SV (ESP8266)
GPI8_KEY1, // GPIO00 Button
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_USER, // GPIO04 Optional sensor
GPI8_USER, // GPIO05 Optional sensor
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
GPI8_USER, // GPIO14 Optional sensor
0, 0,
GPI8_USER // ADC0 Analog input
},
{ // SONOFF_DUAL - Sonoff Dual (ESP8266)
GPI8_USER, // GPIO00 Pad
GPI8_TXD, // GPIO01 Relay control
0,
GPI8_RXD, // GPIO03 Relay control
GPI8_USER, // GPIO04 Optional sensor
0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0,
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
GPI8_USER, // GPIO14 Optional sensor
0, 0, 0
},
{ // SONOFF_POW - Sonoff Pow (ESP8266 - HLW8012)
GPI8_KEY1, // GPIO00 Button
0, 0, 0, 0,
GPI8_NRG_SEL, // GPIO05 HLW8012 Sel output (1 = Voltage)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPI8_NRG_CF1, // GPIO13 HLW8012 CF1 voltage / current
GPI8_HLW_CF, // GPIO14 HLW8012 CF power
GPI8_LED1, // GPIO15 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0
},
{ // SONOFF_LED - Sonoff LED (ESP8266)
GPI8_KEY1, // GPIO00 Button
0, 0, 0,
GPI8_USER, // GPIO04 Optional sensor (PWM3 Green)
GPI8_USER, // GPIO05 Optional sensor (PWM2 Red)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM1, // GPIO12 Cold light (PWM0 Cold)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
GPI8_PWM2, // GPIO14 Warm light (PWM1 Warm)
GPI8_USER, // GPIO15 Optional sensor (PWM4 Blue)
0, 0
},
{ // ELECTRODRAGON - ElectroDragon IoT Relay Board (ESP8266)
GPI8_KEY2, // GPIO00 Button 2
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_KEY1, // GPIO02 Button 1
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_USER, // GPIO04 Optional sensor
GPI8_USER, // GPIO05 Optional sensor
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On)
GPI8_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On)
GPI8_USER, // GPIO14 Optional sensor
GPI8_USER, // GPIO15 Optional sensor
GPI8_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) - Link and Power status
GPI8_USER // ADC0 A0 Analog input
},
{ // EXS_RELAY - ES-Store Latching relay(s) (ESP8266)
// https://ex-store.de/ESP8266-WiFi-Relay-V31
// V3.1 Module Pin 1 VCC 3V3, Module Pin 6 GND
// https://ex-store.de/2-Kanal-WiFi-WLan-Relay-V5-Blackline-fuer-Unterputzmontage
GPI8_USER, // GPIO00 V3.1 Module Pin 8 - V5.0 Module Pin 4
GPI8_USER, // GPIO01 UART0_TXD V3.1 Module Pin 2 - V5.0 Module Pin 3
GPI8_USER, // GPIO02 V3.1 Module Pin 7
GPI8_USER, // GPIO03 UART0_RXD V3.1 Module Pin 3
GPI8_USER, // GPIO04 V3.1 Module Pin 10 - V5.0 Module Pin 2
GPI8_USER, // GPIO05 V3.1 Module Pin 9 - V5.0 Module Pin 1
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Relay1 ( 1 = Off)
GPI8_REL2, // GPIO13 Relay1 ( 1 = On)
GPI8_USER, // GPIO14 V3.1 Module Pin 5 - V5.0 GPI8_REL3_INV Relay2 ( 1 = Off)
GPI8_LED1, // GPIO15 V5.0 LED1 - Link and Power status
GPI8_USER, // GPIO16 V3.1 Module Pin 4 - V5.0 GPI8_REL4_INV Relay2 ( 1 = On)
0
},
{ // WION - Indoor Tap (ESP8266)
// https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w
GPI8_USER, // GPIO00 Optional sensor (pm clock)
0,
GPI8_LED1, // GPIO02 Green Led (1 = On, 0 = Off) - Link and Power status
0, 0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12 Optional sensor (pm data)
GPI8_KEY1, // GPIO13 Button
0,
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
0, 0
},
{ // SONOFF_DEV - Sonoff Dev (ESP8266)
GPI8_KEY1, // GPIO00 E-FW Button
GPI8_USER, // GPIO01 TX Serial RXD and Optional sensor
0, // GPIO02
GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor
GPI8_USER, // GPIO04 Optional sensor
GPI8_USER, // GPIO05 Optional sensor
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12
GPI8_USER, // GPIO13 BLUE LED
GPI8_USER, // GPIO14 Optional sensor
0, // GPIO15
0, // GPIO16
GPI8_USER // ADC0 A0 Analog input
},
{ // H801 - Lixada H801 Wifi (ESP8266)
GPI8_USER, // GPIO00 E-FW Button
GPI8_LED1, // GPIO01 Green LED - Link and Power status
GPI8_USER, // GPIO02 TX and Optional sensor - Pin next to TX on the PCB
GPI8_USER, // GPIO03 RX and Optional sensor - Pin next to GND on the PCB
GPI8_PWM5, // GPIO04 W2 - PWM5
GPI8_LED2_INV, // GPIO05 Red LED
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM3, // GPIO12 Blue
GPI8_PWM2, // GPIO13 Green
GPI8_PWM4, // GPIO14 W1 - PWM4
GPI8_PWM1, // GPIO15 Red
0, 0
},
{ // SONOFF_SC - onoff SC (ESP8266)
GPI8_KEY1, // GPIO00 Button
GPI8_TXD, // GPIO01 RXD to ATMEGA328P
GPI8_USER, // GPIO02 Optional sensor
GPI8_RXD, // GPIO03 TXD to ATMEGA328P
0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0,
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // SONOFF_BN - Sonoff BN-SZ01 Ceiling led (ESP8285)
0, 0, 0, 0, 0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM1, // GPIO12 Light
GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // HUAFAN_SS - Hua Fan Smart Socket (ESP8266) - like Sonoff Pow
GPI8_LEDLNK_INV, // GPIO00 Blue Led (0 = On, 1 = Off) - Link status
0, 0,
GPI8_LED1_INV, // GPIO03 Red Led (0 = On, 1 = Off) - Power status
GPI8_KEY1, // GPIO04 Button
GPI8_REL1_INV, // GPIO05 Relay (0 = On, 1 = Off)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_CF1, // GPIO12 HLW8012 CF1 voltage / current
GPI8_NRG_SEL, // GPIO13 HLW8012 Sel output (1 = Voltage)
GPI8_HLW_CF, // GPIO14 HLW8012 CF power
0, 0, 0
},
{ // SONOFF_BRIDGE - Sonoff RF Bridge 433 (ESP8285)
GPI8_KEY1, // GPIO00 Button
GPI8_TXD, // GPIO01 RF bridge control
GPI8_USER, // GPIO02 Optional sensor
GPI8_RXD, // GPIO03 RF bridge control
GPI8_USER, // GPIO04 Optional sensor
GPI8_USER, // GPIO05 Optional sensor
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12 Optional sensor
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
GPI8_USER, // GPIO14 Optional sensor
0, 0, 0
},
{ // SONOFF_B1 - Sonoff B1 (ESP8285 - my9231)
GPI8_KEY1, // GPIO00 Pad
GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad
GPI8_USER, // GPIO02 Optional sensor SDA pad
GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad
0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_DI, // GPIO12 my9231 DI
0,
GPI8_DCKI, // GPIO14 my9231 DCKI
0, 0, 0
},
{ // AILIGHT - Ai-Thinker RGBW led (ESP8266 - my9291)
GPI8_KEY1, // GPIO00 Pad
GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad
GPI8_USER, // GPIO02 Optional sensor SDA pad
GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad
0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0,
GPI8_DI, // GPIO13 my9291 DI
0,
GPI8_DCKI, // GPIO15 my9291 DCKI
0, 0
},
{ // SONOFF_T11 - Sonoff T1 1CH (ESP8285)
GPI8_KEY1, // GPIO00 Button 1
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // SUPLA1 - Supla Espablo (ESP8266)
// http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/
0, // GPIO00 Flash jumper
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
#ifdef USE_DS18x20
GPI8_DSB, // GPIO02 DS18B20 sensor
#else
GPI8_USER, // GPIO02 Optional sensor
#endif
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_KEY1, // GPIO04 Button 1
GPI8_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12 Optional sensor
GPI8_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On)
GPI8_USER, // GPIO14 Optional sensor
0,
GPI8_LED1, // GPIO16 Led (1 = On, 0 = Off) - Link and Power status
GPI8_USER // ADC0 A0 Analog input
},
{ // WITTY - Witty Cloud Dev Board (ESP8266)
// https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html
GPI8_USER, // GPIO00 D3 flash push button on interface board
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F - Link and Power status
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_KEY1, // GPIO04 D2 push button on ESP-12F board
GPI8_USER, // GPIO05 D1 optional sensor
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM2, // GPIO12 D6 RGB LED Green
GPI8_PWM3, // GPIO13 D7 RGB LED Blue
GPI8_USER, // GPIO14 D5 optional sensor
GPI8_PWM1, // GPIO15 D8 RGB LED Red
GPI8_USER, // GPIO16 D0 optional sensor
GPI8_USER // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled
},
{ // YUNSHAN - Yunshan Wifi Relay (ESP8266)
// https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381
// Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/
0, // GPIO00 Flash jumper - Module Pin 8
GPI8_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2
GPI8_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 - Link and Power status
GPI8_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3
GPI8_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10
GPI8_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0, 0, 0, 0, 0, 0
},
{ // MAGICHOME - Magic Home (aka Flux-light) (ESP8266) and Arilux LC10 (ESP8285)
// https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
0,
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_LED1_INV, // GPIO02 Blue onboard LED - Link and Power status
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional) (Arilux LC10)
GPI8_PWM2, // GPIO05 RGB LED Green
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM3, // GPIO12 RGB LED Blue
GPI8_USER, // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White as used on Arilux LC10)
GPI8_PWM1, // GPIO14 RGB LED Red
GPI8_ARIRFSEL, // GPIO15 RF receiver control (Arilux LC10)
0, 0
},
{ // LUANIHVIO - ESP8266_HVIO
// https://luani.de/projekte/esp8266-hvio/
0, // GPIO00 Flash jumper
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Optional sensor / I2C SDA pad
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_REL1, // GPIO04 Relay 1 (0 = Off, 1 = On)
GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_SWT1, // GPIO12 External input 1 (0 = On, 1 = Off)
GPI8_SWT2, // GPIO13 External input 2 (0 = On, 1 = Off)
GPI8_USER, // GPIO14 Optional sensor / I2C SCL pad
GPI8_LED1, // GPIO15 Led (1 = On, 0 = Off) - Link and Power status
0,
GPI8_USER // ADC0 A0 Analog input
},
{ // KMC_70011 - KMC 70011
// https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ
GPI8_KEY1, // GPIO00 Button
0, 0, 0,
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL, // GPIO12 HLW8012 SEL (1 = Voltage)
GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status
GPI8_REL1, // GPIO14 Relay
0, 0, 0
},
{ // ARILUX_LC01 - Arilux AL-LC01 (ESP8285)
// https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html
// (PwmFrequency 1111Hz)
GPI8_KEY1, // GPIO00 Optional Button
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_ARIRFSEL, // GPIO02 RF receiver control
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional)
GPI8_PWM1, // GPIO05 RGB LED Red
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM2, // GPIO12 RGB LED Green
GPI8_PWM3, // GPIO13 RGB LED Blue
GPI8_USER, // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
0, 0, 0
},
{ // ARILUX_LC11 - Arilux AL-LC11 (ESP8266)
// https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html
// (PwmFrequency 540Hz)
GPI8_KEY1, // GPIO00 Optional Button
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_ARIRFSEL, // GPIO02 RF receiver control
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_PWM2, // GPIO04 RGB LED Green
GPI8_PWM1, // GPIO05 RGB LED Red
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM5, // GPIO12 RGBCW LED Warm
GPI8_PWM4, // GPIO13 RGBW LED Cold
GPI8_PWM3, // GPIO14 RGB LED Blue
GPI8_ARIRFRCV, // GPIO15 RF receiver input
0, 0
},
{ // ARILUX_LC06 - Arilux AL-LC06 (ESP8285)
// https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html
GPI8_KEY1, // GPIO00 Optional Button
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Empty pad
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_USER, // GPIO04 W2 - PWM5
0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM2, // GPIO12 RGB LED Green
GPI8_PWM3, // GPIO13 RGB LED Blue
GPI8_PWM1, // GPIO14 RGB LED Red
GPI8_USER, // GPIO15 RGBW LED White
0, 0
},
{ // ZENGGE_ZF_WF017 - Zenggee ZJ-WF017-A (ESP12S))
// https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644
GPI8_KEY1, // GPIO00 Optional Button
0,
GPI8_USER, // GPIO02 Empty pad
0,
GPI8_USER, // GPIO04 W2 - PWM5
0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM2, // GPIO12 RGB LED Green
GPI8_PWM1, // GPIO13 RGB LED Red
GPI8_PWM3, // GPIO14 RGB LED Blue
0, 0, 0
},
{ // SONOFF_POW_R2 - Sonoff Pow R2 (ESP8285 - CSE7766)
GPI8_KEY1, // GPIO00 Button
GPI8_CSE7766_TX, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor
0,
GPI8_CSE7766_RX, // GPIO03 Serial TXD
0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // BLITZWOLF_BWSHP - BlitzWolf BW-SHP2 and BW-SHP6 (ESP8285 - BL0937 or HJL-01 Energy Monitoring)
// https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html
// https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG/ref=sr_1_fkmr0_1
// https://www.amazon.de/Intelligente-Stromverbrauch-Fernsteurung-Schaltbare-Energieklasse/dp/B076WZQS4S/ref=sr_1_1
// https://www.aliexpress.com/store/product/BlitzWolf-BW-SHP6-EU-Plug-Metering-Version-WIFI-Smart-Socket-220V-240V-10A-Work-with-Amazon/1965360_32945504669.html
GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
0,
GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
GPI8_KEY1, // GPIO13 Button
GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
0, 0
},
{ // SHELLY1 - Shelly1 Open Source (ESP8266 - 2MB) - https://shelly.cloud/shelly1-open-source/
GPI8_USER, // GPIO00 - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
GPI8_USER, // GPIO01 Serial RXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
0,
GPI8_USER, // GPIO03 Serial TXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On)
GPI8_SWT1_NP, // GPIO05 SW pin
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0, 0, 0, 0, 0, 0
},
{ // SHELLY2 - Shelly2 (ESP8266 - 2MB) - https://shelly.cloud/shelly2/
0,
GPI8_MCP39F5_TX, // GPIO01 MCP39F501 Serial input
0,
GPI8_MCP39F5_RX, // GPIO03 MCP39F501 Serial output
GPI8_REL1, // GPIO04
GPI8_REL2, // GPIO05
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_SWT1, // GPIO12
0,
GPI8_SWT2, // GPIO14
GPI8_MCP39F5_RST, // GPIO15 MCP39F501 Reset
0,
0
},
{ // PHILIPS - Xiaomi Philips bulb (ESP8266)
0, 0, 0, 0, 0, 0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_PWM2, // GPIO12 cold/warm light
0, 0,
GPI8_PWM1, // GPIO15 light intensity
0, 0
},
{ // NEO_COOLCAM - Neo Coolcam (ESP8266)
// https://www.banggood.com/NEO-COOLCAM-WiFi-Mini-Smart-Plug-APP-Remote-Control-Timing-Smart-Socket-EU-Plug-p-1288562.html?cur_warehouse=CN
0, 0, 0, 0,
GPI8_LED1_INV, // GPIO04 Red Led (0 = On, 1 = Off) - Link and Power status
0,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPI8_KEY1, // GPIO13 Button
0, 0, 0, 0
},
{ // ESP_SWITCH - Michael Haustein 4 channel wall switch (ESP07 = ESP8266)
// Use rules for further actions like - rule on power1#state do publish cmnd/other_device/power %value% endon
GPI8_KEY2, // GPIO00 Button 2
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_REL3_INV, // GPIO02 Yellow Led 3 (0 = On, 1 = Off)
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_KEY1, // GPIO04 Button 1
GPI8_REL2_INV, // GPIO05 Red Led 2 (0 = On, 1 = Off)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL4_INV, // GPIO12 Blue Led 4 (0 = On, 1 = Off)
GPI8_KEY4, // GPIO13 Button 4
GPI8_KEY3, // GPIO14 Button 3
GPI8_LED1, // GPIO15 Optional sensor
GPI8_REL1_INV, // GPIO16 Green Led 1 (0 = On, 1 = Off)
0
},
{ // OBI - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706
GPI8_USER, // GPIO00
GPI8_USER, // GPIO01 Serial RXD
0,
GPI8_USER, // GPIO03 Serial TXD
GPI8_LED1, // GPIO04 Blue LED - Link and Power status
GPI8_REL1, // GPIO05 (Relay OFF, but used as Relay Switch)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_LED3, // GPIO12 (Relay ON, but set to LOW, so we can switch with GPIO05)
GPI8_USER, // GPIO13
GPI8_KEY1, // GPIO14 Button
0,
GPI8_USER, // GPIO16
GPI8_USER // ADC0 A0 Analog input
},
{ // TECKIN - https://www.amazon.de/gp/product/B07D5V139R
0,
GPI8_KEY1, // GPIO01 Serial TXD and Button
0,
GPI8_LED1_INV, // GPIO03 Serial RXD and Red Led (0 = On, 1 = Off) - Power status
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status
GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On)
0, 0, 0
},
{ // APLIC_WDP303075 - Aplic WDP 303075 (ESP8285 - HLW8012 Energy Monitoring)
// https://www.amazon.de/dp/B07CNWVNJ2
0, 0, 0,
GPI8_KEY1, // GPIO03 Button
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage)
GPI8_LED1_INV, // GPIO13 LED (0 = On, 1 = Off) - Link and Power status
GPI8_REL1, // GPIO14 Relay SRU 5VDC SDA (0 = Off, 1 = On )
0, 0, 0
},
{ // TUYA_DIMMER - Tuya MCU device (ESP8266 w/ separate MCU)
// https://www.amazon.com/gp/product/B07CTNSZZ8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
GPI8_USER, // Virtual Button (controlled by MCU)
GPI8_USER, // GPIO01 MCU serial control
GPI8_USER,
GPI8_USER, // GPIO03 MCU serial control
GPI8_USER,
GPI8_USER,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER,
GPI8_USER,
GPI8_USER, // GPIO14 Green Led
GPI8_USER,
GPI8_USER,
0
},
{ // GOSUND - https://www.amazon.de/gp/product/B0777BWS1P
0,
GPI8_LEDLNK_INV, // GPIO01 Serial RXD and LED1 (blue) inv - Link status
0,
GPI8_KEY1, // GPIO03 Serial TXD and Button
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
GPI8_LED1_INV, // GPIO13 LED2 (red) inv - Power status
GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On)
0, 0, 0
},
{ // ARMTRONIX_DIMMERS - ARMTRONIX Dimmer, one or two channel (ESP8266 w/ separate MCU dimmer)
// https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-two-triac-board/
// https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-esp8266-one-triac-board-alexaecho/
GPI8_USER,
GPI8_TXD, // GPIO01 MCU serial control
GPI8_USER,
GPI8_RXD, // GPIO03 MCU serial control
GPI8_USER,
GPI8_USER,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER,
GPI8_USER,
GPI8_USER,
GPI8_USER,
GPI8_USER,
0
},
{ // SK03_TUYA - Outdoor smart plug with power monitoring HLW8012 chip - https://www.amazon.com/gp/product/B07CG7MBPV
GPI8_KEY1, // GPIO00 Button
0, 0, 0,
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage)
GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Power status
GPI8_LEDLNK_INV, // GPIO14 Blue Led (0 = On, 1 = Off) - Link status
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
0, 0
},
{ // PS_16_DZ - PS-16-DZ Dimmer (ESP8266 w/ separate Nuvoton MCU dimmer)
// https://www.aliexpress.com/item/SM-Smart-WIFI-Wall-Dimmer-Light-Switch-US-Ewelink-APP-Remote-Control-Wi-Fi-Wirele-Work/32871151902.html
GPI8_USER,
GPI8_TXD, // GPIO01 MCU serial control
GPI8_USER,
GPI8_RXD, // GPIO03 MCU serial control
GPI8_USER,
GPI8_USER,
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER,
GPI8_LED1, // GPIO13 WiFi LED - Link and Power status
GPI8_USER,
GPI8_USER,
GPI8_USER,
0
},
{ // TECKIN_US - Teckin SP20 US with Energy Monitoring
// https://www.amazon.com/Outlet-Compatible-Monitoring-Function-Required/dp/B079Q5W22B
// https://www.amazon.com/Outlet-ZOOZEE-Monitoring-Function-Compatible/dp/B07J2LR5KN
GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status
0,
GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status
0,
GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On)
GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
GPI8_KEY1, // GPIO13 Button
GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage
0, 0, 0
},
{ // MANZOKU_EU_4 - "MANZOKU" labeled power strip, EU version
// https://www.amazon.de/Steckdosenleiste-AOFO-Mehrfachsteckdose-Ãœberspannungsschutz-Sprachsteuerung/dp/B07GBSD11P/
// https://www.amazon.de/Steckdosenleiste-Geekbes-USB-Anschluss-Kompatibel-gesteuert/dp/B078W23BW9/
0, // GPIO00
0, // GPIO01 Serial RXD
0,
GPI8_KEY1, // GPIO03 Serial TXD + Button
GPI8_REL2, // GPIO04 Relay 2
GPI8_REL1, // GPIO05 Relay 1
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL3, // GPIO12 Relay 3
GPI8_REL4, // GPIO13 Relay 4
GPI8_USER, // GPIO14
0,
GPI8_USER, // GPIO16
0
},
{ // OBI2 - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-2-stueck-weiss/p/4077673
0, // GPIO00
0, // GPIO01 Serial RXD
0,
0, // GPIO03 Serial TXD
GPI8_REL1, // GPIO04 Relay 1
GPI8_KEY1, // GPIO05 Button
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_LEDLNK_INV, // GPIO12 Green LED - Link status
GPI8_LED1, // GPIO13 Red LED - Power status
0, 0, 0, 0
},
{ // YTF_IR_BRIDGE - https://www.aliexpress.com/item/Tuya-universal-Smart-IR-Hub-remote-control-Voice-Control-AC-TV-Work-With-Alexa-Google-Home/32951202513.html
GPI8_USER, // GPIO00
GPI8_USER, // GPIO01 Serial RXD
GPI8_USER, // GPIO02
GPI8_USER, // GPIO03 Serial TXD
GPI8_LED1_INV, // GPIO04 Blue Led - Link status
GPI8_IRRECV, // GPIO05 IR Receiver
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
0, // GPIO12
GPI8_KEY1, // GPIO13 Button
GPI8_IRSEND, // GPIO14 IR Transmitter
0, 0, 0
},
{ // DIGOO - Digoo DG-SP202
// https://www.banggood.com/DIGOO-DG-SP202-Dual-EU-Plug-Smart-WIFI-Socket-Individual-Controllable-Energy-Monitor-Remote-Control-Timing-Smart-Home-Outlet-let-p-1375323.html
GPI8_KEY1, // GPIO00 Button1
0, // GPIO01 Serial RXD
0, // GPIO02
0, // GPIO03 Serial TXD
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
GPI8_LED1, // GPIO13 Blue Leds - Link Status
GPI8_REL2, // GPIO14 Relay2 (0 = Off, 1 = On) and Red Led
GPI8_REL1, // GPIO15 Relay1 (0 = Off, 1 = On) and Red Led
GPI8_KEY2_NP, // GPIO16 Button2, externally pulled up
0
},
{ // KA10 - SMANERGY KA10 (ESP8285 - BL0937 Energy Monitoring) - https://www.amazon.es/dp/B07MBTCH2Y
0, // GPIO00
GPI8_LEDLNK_INV, // GPIO01 Blue LED - Link status
0, // GPIO02
GPI8_KEY1, // GPIO03 Button
GPI8_HJL_CF, // GPIO04 BL0937 CF power
GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage)
GPI8_LED1, // GPIO13 Red LED - Power status
GPI8_REL1, // GPIO14 Relay 1
0, 0, 0
},
{ // ZX2820
GPI8_KEY1, // GPIO00 Button
0, 0, 0,
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 SEL (0 = Voltage)
GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status
GPI8_REL1, // GPIO14 Relay
0, 0, 0
},
{ // MI_DESK_LAMP - Mi LED Desk Lamp - https://www.mi.com/global/smartlamp/
0, 0,
GPI8_KEY1, // GPIO02 Button
0,
GPI8_PWM1, // GPIO04 Cold White
GPI8_PWM2, // GPIO05 Warm White
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_ROT1A, // GPIO12 Rotary switch A pin
GPI8_ROT1B, // GPIO13 Rotary switch B pin
0, 0, 0, 0
},
{ // SP10 - Tuya SP10 (BL0937 Energy Monitoring)
// https://www.aliexpress.com/item/Smart-Mini-WiFi-Plug-Outlet-Switch-Work-With-ForEcho-Alexa-Google-Home-Remote-EU-Smart-Socket/32963670423.html
0, // GPIO00
GPI8_PWM1, // GPIO01 Nightlight
0, // GPIO02
GPI8_KEY1, // GPIO03 Button
GPI8_HJL_CF, // GPIO04 BL0937 CF power
GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage)
GPI8_LED1, // GPIO13 Blue LED - Link status
GPI8_REL1, // GPIO14 Relay and red LED
0, 0, 0
},
{ // WAGA - WAGA life CHCZ02MB (HJL-01 Energy Monitoring)
// https://www.ebay.com/itm/332595697006
GPI8_LED1_INV, // GPIO00 Red LED
0, // GPIO01 Serial RXD
0, // GPIO02
GPI8_NRG_SEL_INV, // GPIO03 HJL-01 Sel output (1 = Voltage)
0, // GPIO04
GPI8_HJL_CF, // GPIO05 HJL-01 CF power
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Relay
GPI8_KEY1, // GPIO13 Button
GPI8_NRG_CF1, // GPIO14 HJL-01 CF1 voltage / current
GPI8_LEDLNK_INV, // GPIO15 Blue LED - Link status
0, 0
},
{ // SYF05 - Sunyesmart SYF05 (a.k.a. Fcmila) = TYWE3S + SM16726
// Also works with Merkury 904 RGBW Bulbs with 13 set to GPI8_SM16716_SEL
// https://www.flipkart.com/fc-mila-bxav-xs-ad-smart-bulb/p/itmf85zgs45fzr7n
// https://docs.tuya.com/en/hardware/WiFi-module/wifi-e3s-module.html
// http://www.datasheet-pdf.com/PDF/SM16716-Datasheet-Sunmoon-932771
GPI8_USER, // GPIO00 N.C.
0, // GPIO01 Serial RXD
GPI8_USER, // GPIO02 N.C.
0, // GPIO03 Serial TXD
GPI8_SM16716_CLK, // GPIO04 SM16716 Clock
GPI8_PWM1, // GPIO05 White
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12 Alt. White on some devices
GPI8_USER, // GPIO13 SM16716 Enable on some devices
GPI8_SM16716_DAT, // GPIO14 SM16716 Data
0, // GPIO15 wired to GND
GPI8_USER, // GPIO16 N.C.
GPI8_USER // ADC0 A0 Analog input
},
{ // EXS_DIMMER - EX-Store WiFi Dimmer v4, two channel (ESP8266 w/ separate MCU dimmer)
// https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A
// https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A-ESP8266-V12-Stift-und-Buchsenleisten
0,
GPI8_TXD, // GPIO01 MCU serial control
GPI8_LEDLNK, // GPIO02 LED Link
GPI8_RXD, // GPIO03 MCU serial control
GPI8_USER, // GPIO04
GPI8_USER, // GPIO05
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12
GPI8_EXS_ENABLE, // GPIO13 EXS MCU Enable
GPI8_USER, // GPIO14
0, // GPIO15
0, 0
},
{ // PWM_DIMMER - Support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM
// dimmer switches. The brightness of the load for these dimmers is
// controlled by a PWM GPIO pin. There are typically power, up & down
// buttons and 4 LED's. Examples are:
// https://www.amazon.com/dp/B07FXYSVR1
// https://www.amazon.com/dp/B07V26Q3VD
// https://www.amazon.com/dp/B07K67D43J
// https://www.amazon.com/dp/B07TTGFWFM
GPI8_KEY3, // GPIO00 Up button
GPI8_KEY2, // GPIO01 Down button
0, // GPIO02
GPI8_LED4_INV, // GPIO03 Level 5 LED
GPI8_LEDLNK_INV, // GPIO04 LED Link
GPI8_LED3_INV, // GPIO05 Level 4 LED
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_LED2_INV, // GPIO12 Level 3 LED
GPI8_PWM1, // GPIO13 Dimmer PWM
GPI8_LED1_INV, // GPIO12 Level 2 LED
GPI8_KEY1_INV, // GPIO15 Power button
GPI8_REL1_INV, // GPIO16 Power relay/Level 1 LED
0
},
{ // SONOFF_ZB_BRIDGE - Sonoff Zigbee Bridge (ESP8266)
GPI8_LED1_INV, // GPIO00 Green Led (0 = On, 1 = Off) - Traffic between ESP and EFR
GPI8_ZIGBEE_TX, // GPIO01 Zigbee Serial control
0, // GPIO02
GPI8_ZIGBEE_RX, // GPIO03 Zigbee Serial control
GPI8_ZIGBEE_RST, // GPIO04 Zigbee Reset
0, // GPIO05 EFR32 Bootloader mode (drive Low for Gecko Bootloader, inactive or high for Zigbee EmberZNet)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_I2C_SDA, // GPIO12 I2C SDA - connected to 512KB EEPROM
GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status
GPI8_I2C_SCL, // GPIO14 I2C SCL - connected to 512KB EEPROM
0, // GPIO15 connected to IO15 pad, also used for logging
GPI8_KEY1, // GPIO16 Button
0
}
};
/*********************************************************************************************\
* Templates with 14 usable pins (ESP8285)
\*********************************************************************************************/
const mytmplt8285 kModules8285[TMP_MAXMODULE_8266 - TMP_WEMOS] PROGMEM = {
{ // WEMOS - Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266)
GPI8_USER, // GPIO00 D3 Wemos Button Shield
GPI8_USER, // GPIO01 TX Serial RXD
GPI8_USER, // GPIO02 D4 Wemos DHT Shield
GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor
GPI8_USER, // GPIO04 D2 Wemos I2C SDA
GPI8_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_USER, // GPIO09 (SD_DATA2 Flash QIO or ESP8285)
GPI8_USER, // GPIO10 (SD_DATA3 Flash QIO or ESP8285)
// GPIO11 (SD_CMD Flash)
GPI8_USER, // GPIO12 D6
GPI8_USER, // GPIO13 D7
GPI8_USER, // GPIO14 D5
GPI8_USER, // GPIO15 D8
GPI8_USER, // GPIO16 D0 Wemos Wake
GPI8_USER // ADC0 A0 Analog input
},
{ // SONOFF_4CH - Sonoff 4CH (ESP8285)
GPI8_KEY1, // GPIO00 Button 1
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Optional sensor
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
GPI8_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_KEY2, // GPIO09 Button 2
GPI8_KEY3, // GPIO10 Button 3
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) - Link and Power status
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
GPI8_KEY4, // GPIO14 Button 4
GPI8_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
0, 0
},
{ // SONOFF_T12 - Sonoff T1 2CH (ESP8285)
GPI8_KEY1, // GPIO00 Button 1
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
0,
GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_KEY2, // GPIO09 Button 2
0, // GPIO10
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // SONOFF_T13 - Sonoff T1 3CH (ESP8285)
GPI8_KEY1, // GPIO00 Button 1
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
GPI8_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On)
GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_KEY2, // GPIO09 Button 2
GPI8_KEY3, // GPIO10 Button 3
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // SONOFF_DUAL_R2 - Sonoff Dual R2 (ESP8285)
GPI8_USER, // GPIO00 Button 0 on header (0 = On, 1 = Off)
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
0,
GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_USER, // GPIO09 Button 1 on header (0 = On, 1 = Off)
GPI8_KEY1, // GPIO10 Button on casing
// GPIO11 (SD_CMD Flash)
GPI8_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On)
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
0, 0, 0, 0
},
{ // SONOFF_IFAN03 - Sonoff iFan03 (ESP8285)
GPI8_KEY1, // GPIO00 WIFI_KEY0 Button 1
GPI8_TXD, // GPIO01 ESP_TXD Serial RXD connection to P0.5 of RF microcontroller
0, // GPIO02 ESP_LOG
GPI8_RXD, // GPIO03 ESP_RXD Serial TXD connection to P0.4 of RF microcontroller
0, // GPIO04 DEBUG_RX
0, // GPIO05 DEBUG_TX
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
GPI8_REL1_INV, // GPIO09 WIFI_O0 Relay 1 (0 = Off, 1 = On) controlling the light
GPI8_BUZZER_INV, // GPIO10 WIFI_O4 Buzzer (0 = Off, 1 = On)
// GPIO11 (SD_CMD Flash)
GPI8_REL3, // GPIO12 WIFI_O2 Relay 3 (0 = Off, 1 = On) controlling the fan
GPI8_LED1_INV, // GPIO13 WIFI_CHK Blue Led on PCA (0 = On, 1 = Off) - Link and Power status
GPI8_REL2, // GPIO14 WIFI_O1 Relay 2 (0 = Off, 1 = On) controlling the fan
GPI8_REL4, // GPIO15 WIFI_O3 Relay 4 (0 = Off, 1 = On) controlling the fan
0, 0
}
};
#endif // ESP8266
#ifdef ESP32
/********************************************************************************************\
* ESP32 Module templates
\********************************************************************************************/
#define USER_MODULE 255
// Supported hardware modules
enum SupportedModules {
WEMOS,
ESP32_CAM_AITHINKER,
ODROID_GO,
ESP32_SOLO,
WT32_ETH01,
TTGO_WATCH,
M5STACK_CORE2,
MAXMODULE };
// Default module settings
const uint8_t kModuleNiceList[] PROGMEM = {
WEMOS,
#ifdef USE_WEBCAM
ESP32_CAM_AITHINKER,
#endif // USE_WEBCAM
#ifdef USE_ODROID_GO
ODROID_GO,
#endif // USE_ODROID_GO
#ifdef USE_ESP32_SOLO
// ESP32_SOLO, // To be defined
#endif // USE_ESP32_SOLO
#ifdef USE_WT32_ETH01
WT32_ETH01,
#endif // USE_WT32_ETH01
#ifdef USE_TTGO_WATCH
// TTGO_WATCH, // To be defined
#endif // USE_TTGO_WATCH
#ifdef USE_M5STACK_CORE2
M5STACK_CORE2,
#endif // USE_M5STACK_CORE2
};
// !!! Update this list in the same order as kModuleNiceList !!!
const char kModuleNames[] PROGMEM =
"ESP32-DevKit|"
#ifdef USE_WEBCAM
"ESP32-Cam|"
#endif // USE_WEBCAM
#ifdef USE_ODROID_GO
"Odroid Go|"
#endif // USE_ODROID_GO
#ifdef USE_ESP32_SOLO
// "ESP32-Solo|" // To be defined
#endif // USE_ESP32_SOLO
#ifdef USE_WT32_ETH01
"WT32-Eth01|"
#endif // USE_WT32_ETH01
#ifdef USE_TTGO_WATCH
// "TTGO Watch|" // To be defined
#endif // USE_TTGO_WATCH
#ifdef USE_M5STACK_CORE2
"M5Stack Core2|"
#endif // USE_M5STACK_CORE2
;
// !!! Update this list in the same order as SupportedModules !!!
const mytmplt kModules[] PROGMEM = {
{ // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
// 6 IO GPIO6, Flash CLK
// 7 IO GPIO7, Flash D0
// 8 IO GPIO8, Flash D1
AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD
AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD
// 11 IO GPIO11, Flash CMD
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7
AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
0, // 20
AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN
AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1
AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE
0, // 24
AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
0, // 28
0, // 29
0, // 30
0, // 31
AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
0, // 37 NO PULLUP
0, // 38 NO PULLUP
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
0 // Flag
},
#ifdef USE_WEBCAM
{ // ESP32_CAM_AITHINKER - Any ESP32 device with webcam (ESP32)
AGPIO(GPIO_WEBCAM_XCLK), // 0 (I)O GPIO0, CAM_XCLK
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
AGPIO(GPIO_WEBCAM_DATA), // 5 IO GPIO5, CAM_DATA1
// 6 IO GPIO6, Flash CLK
// 7 IO GPIO7, Flash D0
// 8 IO GPIO8, Flash D1
AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD
AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD
// 11 IO GPIO11, Flash CMD
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
AGPIO(GPIO_WEBCAM_DATA) +1, // 18 IO GPIO18, CAM_DATA2
AGPIO(GPIO_WEBCAM_DATA) +2, // 19 IO GPIO19, CAM_DATA3
0, // 20
AGPIO(GPIO_WEBCAM_DATA) +3, // 21 IO GPIO21, CAM_DATA4
AGPIO(GPIO_WEBCAM_PCLK), // 22 IO LED GPIO22, CAM_PCLK
AGPIO(GPIO_WEBCAM_HREF), // 23 IO GPIO23, CAM_HREF
0, // 24
AGPIO(GPIO_WEBCAM_VSYNC), // 25 IO GPIO25, CAM_VSYNC
AGPIO(GPIO_WEBCAM_SIOD), // 26 IO GPIO26, CAM_SIOD
AGPIO(GPIO_WEBCAM_SIOC), // 27 IO GPIO27, CAM_SIOC
0, // 28
0, // 29
0, // 30
0, // 31
AGPIO(GPIO_WEBCAM_PWDN), // 32 IO GPIO32, CAM_PWDN
AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
AGPIO(GPIO_WEBCAM_DATA) +6, // 34 I NO PULLUP GPIO34, CAM_DATA7
AGPIO(GPIO_WEBCAM_DATA) +7, // 35 I NO PULLUP GPIO35, CAM_DATA8
AGPIO(GPIO_WEBCAM_DATA) +4, // 36 I NO PULLUP GPIO36, CAM_DATA5
0, // 37 NO PULLUP
0, // 38 NO PULLUP
AGPIO(GPIO_WEBCAM_DATA) +5, // 39 I NO PULLUP GPIO39, CAM_DATA6
0 // Flag
},
#endif // USE_WEBCAM
#ifdef USE_ODROID_GO
{ // ODROID_GO - (ESP32)
AGPIO(GPIO_KEY1), // 0 (I)O GPIO0, BTN-VOLUME
AGPIO(GPIO_TXD), // 1 IO TXD0 GPIO1, TXD0
AGPIO(GPIO_LEDLNK), // 2 IO GPIO2, STATUS LED
AGPIO(GPIO_RXD), // 3 IO RXD0 GPIO3, RXD0
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
AGPIO(GPIO_ILI9341_CS), // 5 IO GPIO5, VSPI_CS0_LCD
// 6 IO GPIO6, Flash CLK
// 7 IO GPIO7, Flash D0
// 8 IO GPIO8, Flash D1
0, // 9 IO GPIO9, Flash D2, U1RXD
0, // 10 IO GPIO10, Flash D3, U1TXD
// 11 IO GPIO11, Flash CMD
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
AGPIO(GPIO_KEY1) +1, // 13 IO GPIO13, BTN-MENU
AGPIO(GPIO_PWM1), // 14 IO GPIO14, LCD Backlight
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
AGPIO(GPIO_SPI_CLK), // 18 IO GPIO18, VSPI_CLK
AGPIO(GPIO_SPI_MISO), // 19 IO GPIO19, VSPI_MISO
0, // 20
AGPIO(GPIO_ILI9341_DC), // 21 IO GPIO21, SPI_DC_LCD
AGPIO(GPIO_SDCARD_CS), // 22 IO LED GPIO22, VSPI_CS1_TFLASH
AGPIO(GPIO_SPI_MOSI), // 23 IO GPIO23, VSPI_MOSI
0, // 24
0, // 25 IO GPIO25, DAC_1 (PAM8304A)
0, // 26 IO GPIO26, DAC_2 (PAM8304A)
AGPIO(GPIO_KEY1) +2, // 27 IO GPIO27, BTN-SELECT
0, // 28
0, // 29
0, // 30
0, // 31
AGPIO(GPIO_SWT1) +4, // 32 IO GPIO32, BTN-A
AGPIO(GPIO_SWT1) +5, // 33 IO GPIO33, BTN-B
AGPIO(GPIO_ADC_JOY), // 34 I NO PULLUP GPIO34, JOY-X (LEFT-RIGHT)
AGPIO(GPIO_ADC_JOY) +1, // 35 I NO PULLUP GPIO35, JOY-Y (UP-DOWN)
AGPIO(GPIO_ADC_RANGE) +2, // 36 I NO PULLUP GPIO36, SENSOR_VP (BATTERY CARGER)
0, // 37 NO PULLUP
0, // 38 NO PULLUP
AGPIO(GPIO_KEY1) +3, // 39 I NO PULLUP GPIO39, BTN-START
0 // Flag
},
#endif // USE_ODROID_GO
#ifdef USE_ESP32_SOLO
// { // ESP32 Solo (ESP32) - To be defined
// },
#endif // USE_ESP32_SOLO
#ifdef USE_WT32_ETH01
{ // WT32_ETH01 - (ESP32)
0, // 0 (I)O GPIO0, Ethernet EMAC_REF_CLK
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
AGPIO(GPIO_USER), // 5 IO GPIO5, RXD Led green
// 6 IO GPIO6, Flash CLK
// 7 IO GPIO7, Flash D0
// 8 IO GPIO8, Flash D1
0, // 9 IO GPIO9, Flash D2, U1RXD
0, // 10 IO GPIO10, Flash D3, U1TXD
// 11 IO GPIO11, Flash CMD
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
0, // 13 IO GPIO13, Ethernet EMAC_RX_ER
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
AGPIO(GPIO_OUTPUT_HI), // 16 IO GPIO16, Ethernet OSC_ENA
AGPIO(GPIO_LEDLNK_INV), // 17 IO GPIO17, Network link led (green)
AGPIO(GPIO_ETH_PHY_MDIO), // 18 IO GPIO18, Ethernet MDIO
0, // 19 IO GPIO19, Ethernet TXD0
0, // 20
0, // 21 IO GPIO21, Ethernet EMAC_TX_EN
0, // 22 IO LED GPIO22, Ethernet EMAC_TXD1
AGPIO(GPIO_ETH_PHY_MDC), // 23 IO GPIO23, Ethernet MDC
0, // 24
0, // 25 IO GPIO25, Ethernet EMAC_RXD0
0, // 26 IO GPIO26, Ethernet EMAC_RXD1
0, // 27 IO GPIO27, Ethernet EMAC_RX_DV
0, // 28
0, // 29
0, // 30
0, // 31
AGPIO(GPIO_USER), // 32 IO GPIO32, CFG
AGPIO(GPIO_USER), // 33 IO GPIO33, 485_EN
0, // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
0, // 37 NO PULLUP
0, // 38 NO PULLUP
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
0 // Flag
},
#endif // USE_WT32_ETH01
#ifdef USE_TTGO_WATCH
// { // TTGO Watch (ESP32) - To be defined
// },
#endif // USE_TTGO_WATCH
#ifdef USE_M5STACK_CORE2
{ // M5STACK CORE2 - (ESP32)
AGPIO(GPIO_USER), // 0 (I)O GPIO0, SPKR_LRCK
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD
AGPIO(GPIO_USER), // 2 IO GPIO2, SPKR_DATA
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD
AGPIO(GPIO_SDCARD_CS), // 4 IO GPIO4, SPI_CS_CARD
0, // 5 IO GPIO5, SPI_CS_LCD
// 6 IO GPIO6, Flash CLK
// 7 IO GPIO7, Flash D0
// 8 IO GPIO8, Flash D1
0, // 9 IO GPIO9, Flash D2, PSRAM_D3
0, // 10 IO GPIO10, Flash D3, PSRAM_D2
// 11 IO GPIO11, Flash CMD
0, // 12 (I)O GPIO12, SPKR_CLK
AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
0, // 15 (I)O GPIO15, SPI_DC_LCD
0, // 16 IO GPIO16, PSRAM_CS
0, // 17 IO GPIO17, PSRAM_CLK
AGPIO(GPIO_SPI_CLK), // 18 IO GPIO18, SPI_CLK
AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
0, // 20
0, // 21 IO GPIO21, I2C_SDA_INTERNAL
0, // 22 IO LED GPIO22, I2C_SCL_INTERNAL
AGPIO(GPIO_SPI_MOSI), // 23 IO GPIO23, SPI_MOSI
0, // 24
AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
0, // 28
0, // 29
0, // 30
0, // 31
AGPIO(GPIO_I2C_SDA), // 32 IO GPIO32, I2C_SDA
AGPIO(GPIO_I2C_SCL), // 33 IO GPIO33, I2C_SCL
AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
0, // 37 NO PULLUP
AGPIO(GPIO_SPI_MISO), // 38 NO PULLUP GPIO38, SPI_MISO
0, // 39 I NO PULLUP GPIO39, INT_TOUCHPAD
0 // Flag
}
#endif // USE_M5STACK_CORE2
};
/*********************************************************************************************\
Known templates
{"NAME":"AITHINKER CAM","GPIO":[4992,1,1,1,1,5088,1,1,1,1,1,1,1,1,5089,5090,0,5091,5184,5152,0,5120,5024,5056,0,0,0,0,4928,1,5094,5095,5092,0,0,5093],"FLAG":0,"BASE":1}
{"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
{"NAME":"wESP32","GPIO":[1,1,1,1,1,1,0,0,0,1,1,1,5568,5600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
{"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1}
\*********************************************************************************************/
#endif // ESP32
#endif // _TASMOTA_TEMPLATE_H_
Reference in New Issue View Git Blame Copy Permalink