Tasmota/tasmota/xsns_69_opentherm_protocol.ino

576 lines
24 KiB
C++

/*
xsns_69_opentherm_protocol.ino - OpenTherm protocol support for Tasmota
Copyright (C) 2021 Yuriy Sannikov
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_OPENTHERM
#include "OpenTherm.h"
// Temperature tolerance. If temperature setpoint difference is less than the value,
// OT (1)(Control setpoint) command will be skipped
#define OPENTHERM_BOILER_SETPOINT_TOLERANCE 1.0
typedef union {
uint8_t m_flags;
struct
{
uint8_t notSupported : 1; // If set, boiler does not support this command
uint8_t supported : 1; // Set if at least one response were successfull
uint8_t retryCount : 2; // Retry counter before notSupported flag being set
};
} OpenThermParamFlags;
typedef union {
float m_float;
uint8_t m_u8;
uint16_t m_u16;
unsigned long m_ul;
bool m_bool;
} ResponseStorage;
typedef struct OpenThermCommandT
{
const char *m_command_name;
uint8_t m_command_code;
OpenThermParamFlags m_flags;
ResponseStorage m_results[2];
unsigned long (*m_ot_make_request)(OpenThermCommandT *self, OT_BOILER_STATUS_T *boilerStatus);
void (*m_ot_parse_response)(OpenThermCommandT *self, OT_BOILER_STATUS_T *boilerStatus, unsigned long response);
void (*m_ot_appent_telemetry)(OpenThermCommandT *self);
} OpenThermCommand;
OpenThermCommand sns_opentherm_commands[] = {
{// Get/Set Slave Status Flags
.m_command_name = "SLAVE",
.m_command_code = 0,
// OpenTherm ID(0) should never go into the notSupported state due to some connectivity issues
// otherwice it may lose boiler control
.m_flags = {.supported = 1},
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_set_slave_flags,
.m_ot_parse_response = sns_opentherm_parse_slave_flags,
.m_ot_appent_telemetry = sns_opentherm_tele_slave_flags},
{// Set boiler temperature
.m_command_name = "BTMP",
.m_command_code = 0,
// OpenTherm ID(1) also should never go into the notSupported state due to some connectivity issues
.m_flags = {.supported = 1},
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_set_boiler_temperature,
.m_ot_parse_response = sns_opentherm_parse_set_boiler_temperature,
.m_ot_appent_telemetry = sns_opentherm_tele_boiler_temperature},
{// Set Hot Water temperature
.m_command_name = "HWTMP",
.m_command_code = 0,
// OpenTherm ID(56) may not be supported
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_set_boiler_dhw_temperature,
.m_ot_parse_response = sns_opentherm_parse_boiler_dhw_temperature,
.m_ot_appent_telemetry = sns_opentherm_tele_boiler_dhw_temperature},
{// Read Application-specific fault flags and OEM fault code
.m_command_name = "ASFF",
.m_command_code = 0,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_flags,
.m_ot_parse_response = sns_opentherm_parse_flags,
.m_ot_appent_telemetry = sns_opentherm_tele_flags},
{// Read An OEM-specific diagnostic/service code
.m_command_name = "OEMD",
.m_command_code = 0,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_oem_diag,
.m_ot_parse_response = sns_opentherm_parse_oem_diag,
.m_ot_appent_telemetry = sns_opentherm_tele_oem_diag},
{// Read Flame modulation
.m_command_name = "FLM",
.m_command_code = (uint8_t)OpenThermMessageID::RelModLevel,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_flame_modulation,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Boiler Temperature
.m_command_name = "TB",
.m_command_code = (uint8_t)OpenThermMessageID::Tboiler,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_boiler_temperature,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read DHW temperature
.m_command_name = "TDHW",
.m_command_code = (uint8_t)OpenThermMessageID::Tdhw,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Outside temperature
.m_command_name = "TOUT",
.m_command_code = (uint8_t)OpenThermMessageID::Toutside,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Return water temperature
.m_command_name = "TRET",
.m_command_code = (uint8_t)OpenThermMessageID::Tret,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read DHW setpoint
.m_command_name = "DHWS",
.m_command_code = (uint8_t)OpenThermMessageID::TdhwSet,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_dhw_setpoint,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read max CH water setpoint
.m_command_name = "TMAX",
.m_command_code = (uint8_t)OpenThermMessageID::MaxTSet,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Number of Transparent-Slave-Parameters supported by slave
.m_command_name = "OT10",
.m_command_code = (uint8_t)OpenThermMessageID::TSP,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_u8_u8},
{// Read Size of Fault-History-Buffer supported by slave
.m_command_name = "OT12",
.m_command_code = (uint8_t)OpenThermMessageID::FHBsize,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_u8_u8},
{// Read Maximum relative modulation level setting (%)
.m_command_name = "OT14",
.m_command_code = (uint8_t)OpenThermMessageID::MaxRelModLevelSetting,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Maximum boiler capacity (kW) / Minimum boiler modulation level(%)
.m_command_name = "OT15",
.m_command_code = (uint8_t)OpenThermMessageID::MaxCapacityMinModLevel,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_u8_u8},
{// Read Water pressure in CH circuit
.m_command_name = "OT18",
.m_command_code = (uint8_t)OpenThermMessageID::CHPressure,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Read Water flow rate in DHW circuit. (litres/minute)
.m_command_name = "OT19",
.m_command_code = (uint8_t)OpenThermMessageID::DHWFlowRate,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_float,
.m_ot_parse_response = sns_opentherm_parse_generic_float,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_float},
{// Boiler exhaust temperature (°C)
.m_command_name = "OT33",
.m_command_code = (uint8_t)OpenThermMessageID::Texhaust,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_u16},
{// Number of starts burner
.m_command_name = "OT116",
.m_command_code = (uint8_t)OpenThermMessageID::BurnerStarts,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_u16},
{// Number of starts CH pump
.m_command_name = "OT117",
.m_command_code = (uint8_t)OpenThermMessageID::CHPumpStarts,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_u16},
{// Number of hours that burner is in operation (i.e. flame on)
.m_command_name = "OT120",
.m_command_code = (uint8_t)OpenThermMessageID::BurnerOperationHours,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_u16},
{// Number of hours that CH pump has been running
.m_command_name = "OT121",
.m_command_code = (uint8_t)OpenThermMessageID::CHPumpOperationHours,
.m_flags = 0,
.m_results = {{.m_u8 = 0}, {.m_u8 = 0}},
.m_ot_make_request = sns_opentherm_get_generic_u16,
.m_ot_parse_response = sns_opentherm_parse_generic_u16,
.m_ot_appent_telemetry = sns_opentherm_tele_generic_u16},
};
/////////////////////////////////// Process Slave Status Flags & Control //////////////////////////////////////////////////
unsigned long sns_opentherm_set_slave_flags(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *status)
{
bool centralHeatingIsOn = status->m_enableCentralHeating;
if (status->m_useDiagnosticIndicationAsHeatRequest) {
centralHeatingIsOn |= OpenTherm::isDiagnostic(status->m_slave_raw_status);
}
if (self->m_results[1].m_bool != centralHeatingIsOn) {
AddLog(LOG_LEVEL_INFO,
PSTR("[OTH]: Central Heating transitioning from %s to %s"),
self->m_results[1].m_bool ? "on" : "off",
centralHeatingIsOn ? "on" : "off");
if (centralHeatingIsOn) {
status->m_forceSetpointSet = true;
}
}
self->m_results[1].m_bool = centralHeatingIsOn;
unsigned int data = centralHeatingIsOn |
(status->m_enableHotWater << 1) |
(status->m_enableCooling << 2) |
(status->m_enableOutsideTemperatureCompensation << 3) |
(status->m_enableCentralHeating2 << 4);
data <<= 8;
return OpenTherm::buildRequest(OpenThermRequestType::READ, OpenThermMessageID::Status, data);
}
void sns_opentherm_parse_slave_flags(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
boilerStatus->m_slave_raw_status = response;
self->m_results[0].m_ul = response;
}
#define OT_FLAG_TO_ON_OFF(status, flag) ((((status) & (flag)) != 0) ? 1 : 0)
void sns_opentherm_tele_slave_flags(struct OpenThermCommandT *self)
{
unsigned long st = self->m_results[0].m_ul;
ResponseAppend_P(PSTR("{\"FAULT\":%d,\"CH\":%d,\"DHW\":%d,\"FL\":%d,\"COOL\":%d,\"CH2\":%d,\"DIAG\":%d,\"RAW\":%lu}"),
OT_FLAG_TO_ON_OFF(st, 0x01),
OT_FLAG_TO_ON_OFF(st, 0x02),
OT_FLAG_TO_ON_OFF(st, 0x04),
OT_FLAG_TO_ON_OFF(st, 0x08),
OT_FLAG_TO_ON_OFF(st, 0x10),
OT_FLAG_TO_ON_OFF(st, 0x20),
OT_FLAG_TO_ON_OFF(st, 0x40),
st);
}
/////////////////////////////////// Set Boiler Temperature //////////////////////////////////////////////////
unsigned long sns_opentherm_set_boiler_temperature(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *status)
{
// Assuming some boilers might write setpoint temperature into the Flash memory
// Having PID controlled appliance may produce a lot of small fluctuations in the setpoint value
// wearing out Boiler flash memory.
float diff = abs(status->m_boilerSetpoint - self->m_results[0].m_float);
// Ignore small changes in the boiler setpoint temperature
if (diff < OPENTHERM_BOILER_SETPOINT_TOLERANCE && !status->m_forceSetpointSet)
{
return -1;
}
AddLog(LOG_LEVEL_INFO,
PSTR("[OTH]: Setting Boiler Temp. Old: %d, New: %d, Force: %s"),
(int)self->m_results[0].m_float,
(int)status->m_boilerSetpoint,
status->m_forceSetpointSet ? "Y" : "N");
status->m_forceSetpointSet = false;
self->m_results[0].m_float = status->m_boilerSetpoint;
unsigned int data = OpenTherm::temperatureToData(status->m_boilerSetpoint);
return OpenTherm::buildRequest(OpenThermMessageType::WRITE_DATA, OpenThermMessageID::TSet, data);
}
void sns_opentherm_parse_set_boiler_temperature(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[1].m_float = OpenTherm::getFloat(response);
}
void sns_opentherm_tele_boiler_temperature(struct OpenThermCommandT *self)
{
char requested[FLOATSZ];
dtostrfd(self->m_results[0].m_float, Settings->flag2.temperature_resolution, requested);
char actual[FLOATSZ];
dtostrfd(self->m_results[1].m_float, Settings->flag2.temperature_resolution, actual);
// indicate fault if tepmerature demand and actual setpoint are greater then tolerance
bool isFault = abs(self->m_results[1].m_float - self->m_results[0].m_float) > OPENTHERM_BOILER_SETPOINT_TOLERANCE;
ResponseAppend_P(PSTR("{\"FAULT\":%d,\"REQ\":%s,\"ACT\": %s}"),
(int)isFault,
requested,
actual);
}
/////////////////////////////////// Set Domestic Hot Water Temperature //////////////////////////////////////////////////
unsigned long sns_opentherm_set_boiler_dhw_temperature(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *status)
{
// The same consideration as for the boiler temperature
float diff = abs(status->m_hotWaterSetpoint - self->m_results[0].m_float);
// Ignore small changes in the boiler setpoint temperature
if (diff < OPENTHERM_BOILER_SETPOINT_TOLERANCE)
{
return -1;
}
AddLog(LOG_LEVEL_INFO,
PSTR("[OTH]: Setting Hot Water Temp. Old: %d, New: %d"),
(int)self->m_results[0].m_float,
(int)status->m_hotWaterSetpoint);
self->m_results[0].m_float = status->m_hotWaterSetpoint;
unsigned int data = OpenTherm::temperatureToData(status->m_hotWaterSetpoint);
return OpenTherm::buildRequest(OpenThermMessageType::WRITE_DATA, OpenThermMessageID::TdhwSet, data);
}
void sns_opentherm_parse_boiler_dhw_temperature(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[1].m_float = OpenTherm::getFloat(response);
}
void sns_opentherm_tele_boiler_dhw_temperature(struct OpenThermCommandT *self)
{
char requested[FLOATSZ];
dtostrfd(self->m_results[0].m_float, Settings->flag2.temperature_resolution, requested);
char actual[FLOATSZ];
dtostrfd(self->m_results[1].m_float, Settings->flag2.temperature_resolution, actual);
ResponseAppend_P(PSTR("{\"REQ\":%s,\"ACT\": %s}"),
requested,
actual);
}
/////////////////////////////////// App Specific Fault Flags //////////////////////////////////////////////////
unsigned long sns_opentherm_get_flags(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *)
{
return OpenTherm::buildRequest(OpenThermRequestType::READ, OpenThermMessageID::ASFflags, 0);
}
void sns_opentherm_parse_flags(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
uint8_t fault_code = (response >> 8) & 0xFF;
uint8_t oem_fault_code = response & 0xFF;
boilerStatus->m_fault_code = fault_code;
boilerStatus->m_oem_fault_code = fault_code;
self->m_results[0].m_u8 = fault_code;
self->m_results[1].m_u8 = oem_fault_code;
}
void sns_opentherm_tele_flags(struct OpenThermCommandT *self)
{
ResponseAppend_P(PSTR("{\"FC\":%d,\"OFC\":%d}"),
(int)self->m_results[0].m_u8,
(int)self->m_results[1].m_u8);
}
void sns_opentherm_tele_u8_u8(struct OpenThermCommandT *self)
{
ResponseAppend_P(PSTR("{\"lo\":%d,\"hi\":%d}"),
(int)self->m_results[0].m_u8,
(int)self->m_results[1].m_u8);
}
void sns_opentherm_tele_u16(struct OpenThermCommandT *self)
{
ResponseAppend_P(PSTR("%d"), (int)self->m_results[0].m_u16);
}
/////////////////////////////////// OEM Diag Code //////////////////////////////////////////////////
unsigned long sns_opentherm_get_oem_diag(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *)
{
return OpenTherm::buildRequest(OpenThermRequestType::READ, OpenThermMessageID::OEMDiagnosticCode, 0);
}
void sns_opentherm_parse_oem_diag(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
uint16_t diag_code = (uint16_t)response & 0xFFFF;
boilerStatus->m_oem_diag_code = diag_code;
self->m_results[0].m_u16 = diag_code;
}
void sns_opentherm_tele_oem_diag(struct OpenThermCommandT *self)
{
ResponseAppend_P(PSTR("%d"), (int)self->m_results[0].m_u16);
}
/////////////////////////////////// Generic Single Float /////////////////////////////////////////////////
unsigned long sns_opentherm_get_generic_float(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *)
{
return OpenTherm::buildRequest(OpenThermRequestType::READ, (OpenThermMessageID)self->m_command_code, 0);
}
void sns_opentherm_parse_generic_float(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[0].m_float = OpenTherm::getFloat(response);
}
void sns_opentherm_tele_generic_float(struct OpenThermCommandT *self)
{
char str[FLOATSZ];
dtostrfd(self->m_results[0].m_float, Settings->flag2.temperature_resolution, str);
ResponseAppend_P(PSTR("%s"), str);
}
/////////////////////////////////// Generic U16 /////////////////////////////////////////////////
unsigned long sns_opentherm_get_generic_u16(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *)
{
return OpenTherm::buildRequest(OpenThermRequestType::READ, (OpenThermMessageID)self->m_command_code, 0);
}
void sns_opentherm_parse_generic_u16(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[0].m_u16 = response & 0xFFFF;
}
void sns_opentherm_tele_generic_u16(struct OpenThermCommandT *self)
{
ResponseAppend_P(PSTR("%d"), self->m_results[0].m_u16);
}
/////////////////////////////////// Specific Floats Rerports to the /////////////////////////////////////////////////
void sns_opentherm_parse_dhw_setpoint(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[0].m_float = OpenTherm::getFloat(response);
boilerStatus->m_hotWaterSetpoint_read = self->m_results[0].m_float;
}
void sns_opentherm_parse_flame_modulation(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[0].m_float = OpenTherm::getFloat(response);
boilerStatus->m_flame_modulation_read = self->m_results[0].m_float;
}
void sns_opentherm_parse_boiler_temperature(struct OpenThermCommandT *self, struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
self->m_results[0].m_float = OpenTherm::getFloat(response);
boilerStatus->m_boiler_temperature_read = self->m_results[0].m_float;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////
#define SNS_OT_COMMANDS_COUNT (sizeof(sns_opentherm_commands) / sizeof(OpenThermCommand))
int sns_opentherm_current_command = SNS_OT_COMMANDS_COUNT;
unsigned long sns_opentherm_get_next_request(struct OT_BOILER_STATUS_T *boilerStatus)
{
// get next and loop the command
if (++sns_opentherm_current_command >= SNS_OT_COMMANDS_COUNT)
{
sns_opentherm_current_command = 0;
}
// Select next supported command
while (sns_opentherm_current_command < SNS_OT_COMMANDS_COUNT)
{
struct OpenThermCommandT *cmd = &sns_opentherm_commands[sns_opentherm_current_command];
// Return error if command known as not supported
if (!cmd->m_flags.notSupported)
{
// Retrurn OT compatible request
return cmd->m_ot_make_request(cmd, boilerStatus);
}
++sns_opentherm_current_command;
}
return -1;
}
void sns_opentherm_check_retry_request()
{
if (sns_opentherm_current_command >= SNS_OT_COMMANDS_COUNT)
{
return;
}
struct OpenThermCommandT *cmd = &sns_opentherm_commands[sns_opentherm_current_command];
bool canRetry = ++cmd->m_flags.retryCount < 3;
// In case of last retry and if this command never respond successfully, set notSupported flag
if (!canRetry && !cmd->m_flags.supported)
{
cmd->m_flags.notSupported = true;
AddLog(LOG_LEVEL_ERROR,
PSTR("[OTH]: command %s is not supported by the boiler. Last status: %s"),
cmd->m_command_name,
sns_ot_master->statusToString(sns_ot_master->getLastResponseStatus()));
}
}
void sns_opentherm_process_success_response(struct OT_BOILER_STATUS_T *boilerStatus, unsigned long response)
{
if (sns_opentherm_current_command >= SNS_OT_COMMANDS_COUNT)
{
return;
}
struct OpenThermCommandT *cmd = &sns_opentherm_commands[sns_opentherm_current_command];
// mark command as supported
cmd->m_flags.supported = true;
cmd->m_ot_parse_response(cmd, boilerStatus, response);
}
void sns_opentherm_dump_telemetry()
{
for (int i = 0; i < SNS_OT_COMMANDS_COUNT; ++i)
{
struct OpenThermCommandT *cmd = &sns_opentherm_commands[i];
if (!cmd->m_flags.supported)
{
continue;
}
ResponseAppend_P(PSTR(",\"%s\":"), cmd->m_command_name);
cmd->m_ot_appent_telemetry(cmd);
}
}
void sns_opentherm_protocol_reset()
{
sns_opentherm_current_command = SNS_OT_COMMANDS_COUNT;
for (int i = 0; i < SNS_OT_COMMANDS_COUNT; ++i)
{
struct OpenThermCommandT *cmd = &sns_opentherm_commands[i];
cmd->m_flags.m_flags = 0;
memset(cmd->m_results, 0, sizeof(OpenThermCommandT::m_results));
}
}
#endif