mirror of https://github.com/arendst/Tasmota.git
533 lines
17 KiB
C++
533 lines
17 KiB
C++
/*
|
|
xsns_05_ds18x20.ino - DS18x20 temperature sensor support for Tasmota
|
|
|
|
Copyright (C) 2021 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef ESP8266
|
|
#ifdef USE_DS18x20
|
|
/*********************************************************************************************\
|
|
* DS18B20 - Temperature - Multiple sensors
|
|
\*********************************************************************************************/
|
|
|
|
#define XSNS_05 5
|
|
|
|
//#define USE_DS18x20_RECONFIGURE // When sensor is lost keep retrying or re-configure
|
|
//#define DS18x20_USE_ID_AS_NAME // Use last 3 bytes for naming of sensors
|
|
|
|
#define DS18S20_CHIPID 0x10 // +/-0.5C 9-bit
|
|
#define DS1822_CHIPID 0x22 // +/-2C 12-bit
|
|
#define DS18B20_CHIPID 0x28 // +/-0.5C 12-bit
|
|
#define MAX31850_CHIPID 0x3B // +/-0.25C 14-bit
|
|
|
|
#define W1_SKIP_ROM 0xCC
|
|
#define W1_CONVERT_TEMP 0x44
|
|
#define W1_WRITE_EEPROM 0x48
|
|
#define W1_WRITE_SCRATCHPAD 0x4E
|
|
#define W1_READ_SCRATCHPAD 0xBE
|
|
|
|
#ifndef DS18X20_MAX_SENSORS // DS18X20_MAX_SENSORS fallback to 8 if not defined in user_config_override.h
|
|
#define DS18X20_MAX_SENSORS 8
|
|
#endif
|
|
|
|
const char kDs18x20Types[] PROGMEM = "DS18x20|DS18S20|DS1822|DS18B20|MAX31850";
|
|
|
|
uint8_t ds18x20_chipids[] = { 0, DS18S20_CHIPID, DS1822_CHIPID, DS18B20_CHIPID, MAX31850_CHIPID };
|
|
|
|
struct DS18X20STRUCT {
|
|
uint8_t address[8];
|
|
uint8_t index;
|
|
uint8_t valid;
|
|
float temperature;
|
|
} ds18x20_sensor[DS18X20_MAX_SENSORS];
|
|
|
|
struct {
|
|
#ifdef W1_PARASITE_POWER
|
|
uint32_t w1_power_until = 0;
|
|
uint8_t current_sensor = 0;
|
|
#endif
|
|
char name[17];
|
|
uint8_t sensors = 0;
|
|
uint8_t input_mode = 0; // INPUT or INPUT_PULLUP (=2)
|
|
int8_t pin = 0; // Shelly GPIO3 input only
|
|
int8_t pin_out = 0; // Shelly GPIO00 output only
|
|
bool dual_mode = false; // Single pin mode
|
|
} DS18X20Data;
|
|
|
|
/*********************************************************************************************\
|
|
* Embedded tuned OneWire library
|
|
\*********************************************************************************************/
|
|
|
|
#define W1_MATCH_ROM 0x55
|
|
#define W1_SEARCH_ROM 0xF0
|
|
|
|
uint8_t onewire_last_discrepancy = 0;
|
|
uint8_t onewire_last_family_discrepancy = 0;
|
|
bool onewire_last_device_flag = false;
|
|
unsigned char onewire_rom_id[8] = { 0 };
|
|
|
|
/*------------------------------------------------------------------------------------------*/
|
|
|
|
uint8_t OneWireReset(void) {
|
|
uint8_t retries = 125;
|
|
|
|
if (!DS18X20Data.dual_mode) {
|
|
pinMode(DS18X20Data.pin, DS18X20Data.input_mode);
|
|
do {
|
|
if (--retries == 0) {
|
|
return 0;
|
|
}
|
|
delayMicroseconds(2);
|
|
} while (!digitalRead(DS18X20Data.pin));
|
|
pinMode(DS18X20Data.pin, OUTPUT);
|
|
digitalWrite(DS18X20Data.pin, LOW);
|
|
delayMicroseconds(480);
|
|
pinMode(DS18X20Data.pin, DS18X20Data.input_mode);
|
|
delayMicroseconds(70);
|
|
uint8_t r = !digitalRead(DS18X20Data.pin);
|
|
delayMicroseconds(410);
|
|
return r;
|
|
} else {
|
|
digitalWrite(DS18X20Data.pin_out, HIGH);
|
|
do {
|
|
if (--retries == 0) {
|
|
return 0;
|
|
}
|
|
delayMicroseconds(2);
|
|
} while (!digitalRead(DS18X20Data.pin));
|
|
digitalWrite(DS18X20Data.pin_out, LOW);
|
|
delayMicroseconds(480);
|
|
digitalWrite(DS18X20Data.pin_out, HIGH);
|
|
delayMicroseconds(70);
|
|
uint8_t r = !digitalRead(DS18X20Data.pin);
|
|
delayMicroseconds(410);
|
|
return r;
|
|
}
|
|
}
|
|
|
|
void OneWireWriteBit(uint8_t v) {
|
|
static const uint8_t delay_low[2] = { 65, 10 };
|
|
static const uint8_t delay_high[2] = { 5, 55 };
|
|
|
|
v &= 1;
|
|
if (!DS18X20Data.dual_mode) {
|
|
digitalWrite(DS18X20Data.pin, LOW);
|
|
pinMode(DS18X20Data.pin, OUTPUT);
|
|
delayMicroseconds(delay_low[v]);
|
|
digitalWrite(DS18X20Data.pin, HIGH);
|
|
} else {
|
|
digitalWrite(DS18X20Data.pin_out, LOW);
|
|
delayMicroseconds(delay_low[v]);
|
|
digitalWrite(DS18X20Data.pin_out, HIGH);
|
|
}
|
|
delayMicroseconds(delay_high[v]);
|
|
}
|
|
|
|
uint8_t OneWire1ReadBit(void) {
|
|
pinMode(DS18X20Data.pin, OUTPUT);
|
|
digitalWrite(DS18X20Data.pin, LOW);
|
|
delayMicroseconds(3);
|
|
pinMode(DS18X20Data.pin, DS18X20Data.input_mode);
|
|
delayMicroseconds(10);
|
|
uint8_t r = digitalRead(DS18X20Data.pin);
|
|
delayMicroseconds(53);
|
|
return r;
|
|
}
|
|
|
|
uint8_t OneWire2ReadBit(void) {
|
|
digitalWrite(DS18X20Data.pin_out, LOW);
|
|
delayMicroseconds(3);
|
|
digitalWrite(DS18X20Data.pin_out, HIGH);
|
|
delayMicroseconds(10);
|
|
uint8_t r = digitalRead(DS18X20Data.pin);
|
|
delayMicroseconds(53);
|
|
return r;
|
|
}
|
|
|
|
/*------------------------------------------------------------------------------------------*/
|
|
|
|
void OneWireWrite(uint8_t v) {
|
|
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
|
OneWireWriteBit((bit_mask & v) ? 1 : 0);
|
|
}
|
|
}
|
|
|
|
uint8_t OneWireRead(void) {
|
|
uint8_t r = 0;
|
|
|
|
if (!DS18X20Data.dual_mode) {
|
|
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
|
if (OneWire1ReadBit()) {
|
|
r |= bit_mask;
|
|
}
|
|
}
|
|
} else {
|
|
for (uint8_t bit_mask = 0x01; bit_mask; bit_mask <<= 1) {
|
|
if (OneWire2ReadBit()) {
|
|
r |= bit_mask;
|
|
}
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
void OneWireSelect(const uint8_t rom[8]) {
|
|
OneWireWrite(W1_MATCH_ROM);
|
|
for (uint32_t i = 0; i < 8; i++) {
|
|
OneWireWrite(rom[i]);
|
|
}
|
|
}
|
|
|
|
uint8_t OneWireSearch(uint8_t *newAddr) {
|
|
uint8_t id_bit_number = 1;
|
|
uint8_t last_zero = 0;
|
|
uint8_t rom_byte_number = 0;
|
|
uint8_t search_result = 0;
|
|
uint8_t id_bit;
|
|
uint8_t cmp_id_bit;
|
|
unsigned char rom_byte_mask = 1;
|
|
unsigned char search_direction;
|
|
|
|
if (!onewire_last_device_flag) {
|
|
if (!OneWireReset()) {
|
|
onewire_last_discrepancy = 0;
|
|
onewire_last_device_flag = false;
|
|
onewire_last_family_discrepancy = 0;
|
|
return false;
|
|
}
|
|
OneWireWrite(W1_SEARCH_ROM);
|
|
do {
|
|
if (!DS18X20Data.dual_mode) {
|
|
id_bit = OneWire1ReadBit();
|
|
cmp_id_bit = OneWire1ReadBit();
|
|
} else {
|
|
id_bit = OneWire2ReadBit();
|
|
cmp_id_bit = OneWire2ReadBit();
|
|
}
|
|
if ((id_bit == 1) && (cmp_id_bit == 1)) {
|
|
break;
|
|
} else {
|
|
if (id_bit != cmp_id_bit) {
|
|
search_direction = id_bit;
|
|
} else {
|
|
if (id_bit_number < onewire_last_discrepancy) {
|
|
search_direction = ((onewire_rom_id[rom_byte_number] & rom_byte_mask) > 0);
|
|
} else {
|
|
search_direction = (id_bit_number == onewire_last_discrepancy);
|
|
}
|
|
if (search_direction == 0) {
|
|
last_zero = id_bit_number;
|
|
if (last_zero < 9) {
|
|
onewire_last_family_discrepancy = last_zero;
|
|
}
|
|
}
|
|
}
|
|
if (search_direction == 1) {
|
|
onewire_rom_id[rom_byte_number] |= rom_byte_mask;
|
|
} else {
|
|
onewire_rom_id[rom_byte_number] &= ~rom_byte_mask;
|
|
}
|
|
OneWireWriteBit(search_direction);
|
|
id_bit_number++;
|
|
rom_byte_mask <<= 1;
|
|
if (rom_byte_mask == 0) {
|
|
rom_byte_number++;
|
|
rom_byte_mask = 1;
|
|
}
|
|
}
|
|
} while (rom_byte_number < 8);
|
|
if (!(id_bit_number < 65)) {
|
|
onewire_last_discrepancy = last_zero;
|
|
if (onewire_last_discrepancy == 0) {
|
|
onewire_last_device_flag = true;
|
|
}
|
|
search_result = true;
|
|
}
|
|
}
|
|
if (!search_result || !onewire_rom_id[0]) {
|
|
onewire_last_discrepancy = 0;
|
|
onewire_last_device_flag = false;
|
|
onewire_last_family_discrepancy = 0;
|
|
search_result = false;
|
|
}
|
|
for (uint32_t i = 0; i < 8; i++) {
|
|
newAddr[i] = onewire_rom_id[i];
|
|
}
|
|
return search_result;
|
|
}
|
|
|
|
bool OneWireCrc8(uint8_t *addr) {
|
|
uint8_t crc = 0;
|
|
uint8_t len = 8;
|
|
|
|
while (len--) {
|
|
uint8_t inbyte = *addr++; // from 0 to 7
|
|
for (uint32_t i = 8; i; i--) {
|
|
uint8_t mix = (crc ^ inbyte) & 0x01;
|
|
crc >>= 1;
|
|
if (mix) {
|
|
crc ^= 0x8C;
|
|
}
|
|
inbyte >>= 1;
|
|
}
|
|
}
|
|
return (crc == *addr); // addr 8
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void Ds18x20Init(void) {
|
|
DS18X20Data.pin = Pin(GPIO_DSB);
|
|
DS18X20Data.input_mode = Settings.flag3.ds18x20_internal_pullup ? INPUT_PULLUP : INPUT; // SetOption74 - Enable internal pullup for single DS18x20 sensor
|
|
|
|
if (PinUsed(GPIO_DSB_OUT)) {
|
|
DS18X20Data.pin_out = Pin(GPIO_DSB_OUT);
|
|
DS18X20Data.dual_mode = true; // Dual pins mode as used by Shelly
|
|
pinMode(DS18X20Data.pin_out, OUTPUT);
|
|
pinMode(DS18X20Data.pin, DS18X20Data.input_mode);
|
|
}
|
|
|
|
onewire_last_discrepancy = 0;
|
|
onewire_last_device_flag = false;
|
|
onewire_last_family_discrepancy = 0;
|
|
for (uint32_t i = 0; i < 8; i++) {
|
|
onewire_rom_id[i] = 0;
|
|
}
|
|
|
|
uint64_t ids[DS18X20_MAX_SENSORS];
|
|
DS18X20Data.sensors = 0;
|
|
while (DS18X20Data.sensors < DS18X20_MAX_SENSORS) {
|
|
if (!OneWireSearch(ds18x20_sensor[DS18X20Data.sensors].address)) {
|
|
break;
|
|
}
|
|
if (OneWireCrc8(ds18x20_sensor[DS18X20Data.sensors].address) &&
|
|
((ds18x20_sensor[DS18X20Data.sensors].address[0] == DS18S20_CHIPID) ||
|
|
(ds18x20_sensor[DS18X20Data.sensors].address[0] == DS1822_CHIPID) ||
|
|
(ds18x20_sensor[DS18X20Data.sensors].address[0] == DS18B20_CHIPID) ||
|
|
(ds18x20_sensor[DS18X20Data.sensors].address[0] == MAX31850_CHIPID))) {
|
|
ds18x20_sensor[DS18X20Data.sensors].index = DS18X20Data.sensors;
|
|
ids[DS18X20Data.sensors] = ds18x20_sensor[DS18X20Data.sensors].address[0]; // Chip id
|
|
for (uint32_t j = 6; j > 0; j--) {
|
|
ids[DS18X20Data.sensors] = ids[DS18X20Data.sensors] << 8 | ds18x20_sensor[DS18X20Data.sensors].address[j];
|
|
}
|
|
DS18X20Data.sensors++;
|
|
}
|
|
}
|
|
for (uint32_t i = 0; i < DS18X20Data.sensors; i++) {
|
|
for (uint32_t j = i + 1; j < DS18X20Data.sensors; j++) {
|
|
if (ids[ds18x20_sensor[i].index] > ids[ds18x20_sensor[j].index]) { // Sort ascending
|
|
std::swap(ds18x20_sensor[i].index, ds18x20_sensor[j].index);
|
|
}
|
|
}
|
|
}
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSORS_FOUND " %d"), DS18X20Data.sensors);
|
|
}
|
|
|
|
void Ds18x20Convert(void) {
|
|
OneWireReset();
|
|
#ifdef W1_PARASITE_POWER
|
|
// With parasite power address one sensor at a time
|
|
if (++DS18X20Data.current_sensor >= DS18X20Data.sensors)
|
|
DS18X20Data.current_sensor = 0;
|
|
OneWireSelect(ds18x20_sensor[DS18X20Data.current_sensor].address);
|
|
#else
|
|
OneWireWrite(W1_SKIP_ROM); // Address all Sensors on Bus
|
|
#endif
|
|
OneWireWrite(W1_CONVERT_TEMP); // start conversion, no parasite power on at the end
|
|
// delay(750); // 750ms should be enough for 12bit conv
|
|
}
|
|
|
|
bool Ds18x20Read(uint8_t sensor) {
|
|
uint8_t data[9];
|
|
int8_t sign = 1;
|
|
|
|
uint8_t index = ds18x20_sensor[sensor].index;
|
|
if (ds18x20_sensor[index].valid) { ds18x20_sensor[index].valid--; }
|
|
for (uint32_t retry = 0; retry < 3; retry++) {
|
|
OneWireReset();
|
|
OneWireSelect(ds18x20_sensor[index].address);
|
|
OneWireWrite(W1_READ_SCRATCHPAD);
|
|
for (uint32_t i = 0; i < 9; i++) {
|
|
data[i] = OneWireRead();
|
|
}
|
|
if (OneWireCrc8(data)) {
|
|
switch(ds18x20_sensor[index].address[0]) {
|
|
case DS18S20_CHIPID: {
|
|
int16_t tempS = (((data[1] << 8) | (data[0] & 0xFE)) << 3) | ((0x10 - data[6]) & 0x0F);
|
|
ds18x20_sensor[index].temperature = ConvertTemp(tempS * 0.0625 - 0.250);
|
|
|
|
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
|
return true;
|
|
}
|
|
case DS1822_CHIPID:
|
|
case DS18B20_CHIPID: {
|
|
if (data[4] != 0x7F) {
|
|
data[4] = 0x7F; // Set resolution to 12-bit
|
|
OneWireReset();
|
|
OneWireSelect(ds18x20_sensor[index].address);
|
|
OneWireWrite(W1_WRITE_SCRATCHPAD);
|
|
OneWireWrite(data[2]); // Th Register
|
|
OneWireWrite(data[3]); // Tl Register
|
|
OneWireWrite(data[4]); // Configuration Register
|
|
OneWireSelect(ds18x20_sensor[index].address);
|
|
OneWireWrite(W1_WRITE_EEPROM); // Save scratchpad to EEPROM
|
|
#ifdef W1_PARASITE_POWER
|
|
DS18X20Data.w1_power_until = millis() + 10; // 10ms specified duration for EEPROM write
|
|
#endif
|
|
}
|
|
uint16_t temp12 = (data[1] << 8) + data[0];
|
|
if (temp12 > 2047) {
|
|
temp12 = (~temp12) +1;
|
|
sign = -1;
|
|
}
|
|
ds18x20_sensor[index].temperature = ConvertTemp(sign * temp12 * 0.0625); // Divide by 16
|
|
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
|
return true;
|
|
}
|
|
case MAX31850_CHIPID: {
|
|
int16_t temp14 = (data[1] << 8) + (data[0] & 0xFC);
|
|
ds18x20_sensor[index].temperature = ConvertTemp(temp14 * 0.0625); // Divide by 16
|
|
ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
|
|
return false;
|
|
}
|
|
|
|
void Ds18x20Name(uint8_t sensor) {
|
|
uint8_t index = sizeof(ds18x20_chipids);
|
|
while (index) {
|
|
if (ds18x20_sensor[ds18x20_sensor[sensor].index].address[0] == ds18x20_chipids[index]) {
|
|
break;
|
|
}
|
|
index--;
|
|
}
|
|
GetTextIndexed(DS18X20Data.name, sizeof(DS18X20Data.name), index, kDs18x20Types);
|
|
if (DS18X20Data.sensors > 1) {
|
|
#ifdef DS18x20_USE_ID_AS_NAME
|
|
char address[17];
|
|
for (uint32_t j = 0; j < 3; j++) {
|
|
sprintf(address+2*j, "%02X", ds18x20_sensor[ds18x20_sensor[sensor].index].address[3-j]); // Only last 3 bytes
|
|
}
|
|
snprintf_P(DS18X20Data.name, sizeof(DS18X20Data.name), PSTR("%s%c%s"), DS18X20Data.name, IndexSeparator(), address);
|
|
#else
|
|
snprintf_P(DS18X20Data.name, sizeof(DS18X20Data.name), PSTR("%s%c%d"), DS18X20Data.name, IndexSeparator(), sensor +1);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void Ds18x20EverySecond(void) {
|
|
if (!DS18X20Data.sensors) { return; }
|
|
|
|
#ifdef W1_PARASITE_POWER
|
|
// skip access if there is still an eeprom write ongoing
|
|
unsigned long now = millis();
|
|
if (now < DS18X20Data.w1_power_until) { return; }
|
|
#endif
|
|
if (TasmotaGlobal.uptime & 1
|
|
#ifdef W1_PARASITE_POWER
|
|
// if more than 1 sensor and only parasite power: convert every cycle
|
|
|| DS18X20Data.sensors >= 2
|
|
#endif
|
|
) {
|
|
// 2mS
|
|
Ds18x20Convert(); // Start conversion, takes up to one second
|
|
} else {
|
|
for (uint32_t i = 0; i < DS18X20Data.sensors; i++) {
|
|
// 12mS per device
|
|
if (!Ds18x20Read(i)) { // Read temperature
|
|
Ds18x20Name(i);
|
|
AddLogMissed(DS18X20Data.name, ds18x20_sensor[ds18x20_sensor[i].index].valid);
|
|
#ifdef USE_DS18x20_RECONFIGURE
|
|
if (!ds18x20_sensor[ds18x20_sensor[i].index].valid) {
|
|
memset(&ds18x20_sensor, 0, sizeof(ds18x20_sensor));
|
|
Ds18x20Init(); // Re-configure
|
|
}
|
|
#endif // USE_DS18x20_RECONFIGURE
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void Ds18x20Show(bool json) {
|
|
for (uint32_t i = 0; i < DS18X20Data.sensors; i++) {
|
|
uint8_t index = ds18x20_sensor[i].index;
|
|
|
|
if (ds18x20_sensor[index].valid) { // Check for valid temperature
|
|
Ds18x20Name(i);
|
|
|
|
if (json) {
|
|
char address[17];
|
|
for (uint32_t j = 0; j < 6; j++) {
|
|
sprintf(address+2*j, "%02X", ds18x20_sensor[index].address[6-j]); // Skip sensor type and crc
|
|
}
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"" D_JSON_ID "\":\"%s\",\"" D_JSON_TEMPERATURE "\":%*_f}"),
|
|
DS18X20Data.name, address, Settings.flag2.temperature_resolution, &ds18x20_sensor[index].temperature);
|
|
#ifdef USE_DOMOTICZ
|
|
if ((0 == TasmotaGlobal.tele_period) && (0 == i)) {
|
|
DomoticzFloatSensor(DZ_TEMP, ds18x20_sensor[index].temperature);
|
|
}
|
|
#endif // USE_DOMOTICZ
|
|
#ifdef USE_KNX
|
|
if ((0 == TasmotaGlobal.tele_period) && (0 == i)) {
|
|
KnxSensor(KNX_TEMPERATURE, ds18x20_sensor[index].temperature);
|
|
}
|
|
#endif // USE_KNX
|
|
#ifdef USE_WEBSERVER
|
|
} else {
|
|
WSContentSend_Temp(DS18X20Data.name, ds18x20_sensor[index].temperature);
|
|
#endif // USE_WEBSERVER
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xsns05(uint8_t function) {
|
|
bool result = false;
|
|
|
|
if (PinUsed(GPIO_DSB)) {
|
|
switch (function) {
|
|
case FUNC_INIT:
|
|
Ds18x20Init();
|
|
break;
|
|
case FUNC_EVERY_SECOND:
|
|
Ds18x20EverySecond();
|
|
break;
|
|
case FUNC_JSON_APPEND:
|
|
Ds18x20Show(1);
|
|
break;
|
|
#ifdef USE_WEBSERVER
|
|
case FUNC_WEB_SENSOR:
|
|
Ds18x20Show(0);
|
|
break;
|
|
#endif // USE_WEBSERVER
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_DS18x20
|
|
#endif // ESP8266
|