mirror of https://github.com/arendst/Tasmota.git
3475 lines
169 KiB
C
3475 lines
169 KiB
C
/*
|
||
tasmota_template.h - template settings for Tasmota
|
||
|
||
Copyright (C) 2021 Theo Arends
|
||
|
||
This program is free software: you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation, either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
*/
|
||
|
||
#ifndef _TASMOTA_TEMPLATE_H_
|
||
#define _TASMOTA_TEMPLATE_H_
|
||
|
||
// User selectable GPIO functionality
|
||
// ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END
|
||
// Then add the same name(s) in a nice location in array kGpioNiceList
|
||
enum UserSelectablePins {
|
||
GPIO_NONE, // Not used
|
||
GPIO_KEY1, GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, // 4 x Button
|
||
GPIO_SWT1, GPIO_SWT1_NP, // 8 x User connected external switches
|
||
GPIO_REL1, GPIO_REL1_INV, // 8 x Relays
|
||
GPIO_LED1, GPIO_LED1_INV, // 4 x Leds
|
||
GPIO_CNTR1, GPIO_CNTR1_NP, // 4 x Counter
|
||
GPIO_PWM1, GPIO_PWM1_INV, // 5 x PWM
|
||
GPIO_BUZZER, GPIO_BUZZER_INV, // Buzzer
|
||
GPIO_LEDLNK, GPIO_LEDLNK_INV, // Link led
|
||
GPIO_I2C_SCL, GPIO_I2C_SDA, // Software I2C
|
||
GPIO_SPI_MISO, GPIO_SPI_MOSI, GPIO_SPI_CLK, GPIO_SPI_CS, GPIO_SPI_DC, // Hardware SPI
|
||
GPIO_SSPI_MISO, GPIO_SSPI_MOSI, GPIO_SSPI_SCLK, GPIO_SSPI_CS, GPIO_SSPI_DC, // Software SPI
|
||
GPIO_BACKLIGHT, // Display backlight control
|
||
GPIO_OLED_RESET, // OLED Display Reset
|
||
GPIO_IRSEND, GPIO_IRRECV, // IR interface
|
||
GPIO_RFSEND, GPIO_RFRECV, // RF interface
|
||
GPIO_DHT11, GPIO_DHT22, GPIO_SI7021, GPIO_DHT11_OUT, // DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
|
||
GPIO_DSB, GPIO_DSB_OUT, // DS18B20 or DS18S20
|
||
GPIO_WS2812, // WS2812 Led string
|
||
GPIO_MHZ_TXD, GPIO_MHZ_RXD, // MH-Z19 Serial interface
|
||
GPIO_PZEM0XX_TX, GPIO_PZEM004_RX, GPIO_PZEM016_RX, GPIO_PZEM017_RX, // PZEM Serial Modbus interface
|
||
GPIO_SAIR_TX, GPIO_SAIR_RX, // SenseAir Serial interface
|
||
GPIO_PMS5003_TX, GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface
|
||
GPIO_SDS0X1_TX, GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface
|
||
GPIO_SBR_TX, GPIO_SBR_RX, // Serial Bridge Serial interface
|
||
GPIO_SR04_TRIG, GPIO_SR04_ECHO, // SR04 interface
|
||
GPIO_SDM120_TX, GPIO_SDM120_RX, // SDM120 Serial interface
|
||
GPIO_SDM630_TX, GPIO_SDM630_RX, // SDM630 Serial interface
|
||
GPIO_TM1638CLK, GPIO_TM1638DIO, GPIO_TM1638STB, // TM1638 interface
|
||
GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player
|
||
GPIO_HX711_SCK, GPIO_HX711_DAT, // HX711 Load Cell interface
|
||
GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin
|
||
GPIO_TUYA_TX, GPIO_TUYA_RX, // Tuya Serial interface
|
||
GPIO_MGC3130_XFER, GPIO_MGC3130_RESET, // MGC3130 interface
|
||
GPIO_RF_SENSOR, // Rf receiver with sensor decoding
|
||
GPIO_AZ_TXD, GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface
|
||
GPIO_MAX31855CS, GPIO_MAX31855CLK, GPIO_MAX31855DO, // MAX31855 Serial interface
|
||
GPIO_NRG_SEL, GPIO_NRG_SEL_INV, GPIO_NRG_CF1, GPIO_HLW_CF, GPIO_HJL_CF, // HLW8012/HJL-01/BL0937 energy monitoring
|
||
GPIO_MCP39F5_TX, GPIO_MCP39F5_RX, GPIO_MCP39F5_RST, // MCP39F501 Energy monitoring (Shelly2)
|
||
GPIO_PN532_TXD, GPIO_PN532_RXD, // PN532 NFC Serial interface
|
||
GPIO_SM16716_CLK, GPIO_SM16716_DAT, GPIO_SM16716_SEL, // SM16716 SELECT
|
||
GPIO_DI, GPIO_DCKI, // my92x1 PWM controller
|
||
GPIO_CSE7766_TX, GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2)
|
||
GPIO_ARIRFRCV, GPIO_ARIRFSEL, // Arilux RF Receive input
|
||
GPIO_TXD, GPIO_RXD, // Serial interface
|
||
GPIO_ROT1A, GPIO_ROT1B, // Rotary switch
|
||
GPIO_ADC_JOY, // Analog joystick
|
||
GPIO_SSPI_MAX31865_CS1, // MAX31865 Chip Select
|
||
GPIO_HRE_CLOCK, GPIO_HRE_DATA, // HR-E Water Meter
|
||
GPIO_ADE7953_IRQ, // ADE7953 IRQ
|
||
GPIO_SOLAXX1_TX, GPIO_SOLAXX1_RX, // Solax Inverter Serial interface
|
||
GPIO_ZIGBEE_TX, GPIO_ZIGBEE_RX, // Zigbee Serial interface
|
||
GPIO_RDM6300_RX, // RDM6300 RX
|
||
GPIO_IBEACON_TX, GPIO_IBEACON_RX, // HM17 IBEACON Serial interface
|
||
GPIO_A4988_DIR, GPIO_A4988_STP, GPIO_A4988_ENA, GPIO_A4988_MS1, // A4988 interface
|
||
GPIO_OUTPUT_HI, GPIO_OUTPUT_LO, // Fixed output state
|
||
GPIO_DDS2382_TX, GPIO_DDS2382_RX, // DDS2382 Serial interface
|
||
GPIO_DDSU666_TX, GPIO_DDSU666_RX, // DDSU666 Serial interface
|
||
GPIO_SM2135_CLK, GPIO_SM2135_DAT, // SM2135 PWM controller
|
||
GPIO_DEEPSLEEP, // Kill switch for deepsleep
|
||
GPIO_EXS_ENABLE, // EXS MCU Enable
|
||
GPIO_TASMOTACLIENT_TXD, GPIO_TASMOTACLIENT_RXD, // Client Serial interface
|
||
GPIO_TASMOTACLIENT_RST, GPIO_TASMOTACLIENT_RST_INV, // Client Reset
|
||
GPIO_HPMA_RX, GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
|
||
GPIO_GPS_RX, GPIO_GPS_TX, // GPS Serial interface
|
||
GPIO_HM10_RX, GPIO_HM10_TX, // HM10-BLE-Mijia-bridge Serial interface
|
||
GPIO_LE01MR_RX, GPIO_LE01MR_TX, // F&F LE-01MR energy meter
|
||
GPIO_CC1101_GDO0, GPIO_CC1101_GDO2, // CC1101 Serial interface
|
||
GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor
|
||
GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX
|
||
GPIO_AS3935, // Franklin Lightning Sensor
|
||
GPIO_ADC_INPUT, // Analog input
|
||
GPIO_ADC_TEMP, // Analog Thermistor
|
||
GPIO_ADC_LIGHT, // Analog Light sensor
|
||
GPIO_ADC_BUTTON, GPIO_ADC_BUTTON_INV, // Analog Button
|
||
GPIO_ADC_RANGE, // Analog Range
|
||
GPIO_ADC_CT_POWER, // ANalog Current
|
||
#ifdef ESP32
|
||
GPIO_WEBCAM_PWDN, GPIO_WEBCAM_RESET, GPIO_WEBCAM_XCLK, // Webcam
|
||
GPIO_WEBCAM_SIOD, GPIO_WEBCAM_SIOC, // Webcam I2C
|
||
GPIO_WEBCAM_DATA,
|
||
GPIO_WEBCAM_VSYNC, GPIO_WEBCAM_HREF, GPIO_WEBCAM_PCLK,
|
||
GPIO_WEBCAM_PSCLK,
|
||
GPIO_WEBCAM_HSD,
|
||
GPIO_WEBCAM_PSRCS,
|
||
#endif
|
||
GPIO_BOILER_OT_RX, GPIO_BOILER_OT_TX, // OpenTherm Boiler TX pin
|
||
GPIO_WINDMETER_SPEED, // WindMeter speed counter pin
|
||
GPIO_KEY1_TC, // Touch pin as button
|
||
GPIO_BL0940_RX, // BL0940 serial interface
|
||
GPIO_TCP_TX, GPIO_TCP_RX, // TCP to serial bridge
|
||
#ifdef ESP32
|
||
GPIO_ETH_PHY_POWER, GPIO_ETH_PHY_MDC, GPIO_ETH_PHY_MDIO, // Ethernet
|
||
#endif
|
||
GPIO_TELEINFO_RX, // Teleinfo telemetry data receive pin
|
||
GPIO_TELEINFO_ENABLE, // Teleinfo Enable Receive Pin
|
||
GPIO_LMT01, // LMT01 input counting pin
|
||
GPIO_IEM3000_TX, GPIO_IEM3000_RX, // IEM3000 Serial interface
|
||
GPIO_ZIGBEE_RST, // Zigbee reset
|
||
GPIO_DYP_RX,
|
||
GPIO_MIEL_HVAC_TX, GPIO_MIEL_HVAC_RX, // Mitsubishi Electric HVAC
|
||
GPIO_WE517_TX, GPIO_WE517_RX, // ORNO WE517 Serial interface
|
||
GPIO_AS608_TX, GPIO_AS608_RX, // Serial interface AS608 / R503
|
||
GPIO_SHELLY_DIMMER_BOOT0, GPIO_SHELLY_DIMMER_RST_INV,
|
||
GPIO_RC522_RST, // RC522 reset
|
||
GPIO_P9813_CLK, GPIO_P9813_DAT, // P9813 Clock and Data
|
||
GPIO_OPTION_A, // Specific device options to be served in code
|
||
GPIO_FTC532, // FTC532 touch ctrlr serial input
|
||
GPIO_RC522_CS,
|
||
GPIO_NRF24_CS, GPIO_NRF24_DC,
|
||
GPIO_ILI9341_CS, GPIO_ILI9341_DC,
|
||
GPIO_ILI9488_CS,
|
||
GPIO_EPAPER29_CS,
|
||
GPIO_EPAPER42_CS,
|
||
GPIO_SSD1351_CS,
|
||
GPIO_RA8876_CS,
|
||
GPIO_ST7789_CS, GPIO_ST7789_DC,
|
||
GPIO_SSD1331_CS, GPIO_SSD1331_DC,
|
||
GPIO_SDCARD_CS,
|
||
GPIO_ROT1A_NP, GPIO_ROT1B_NP, // Rotary switch
|
||
GPIO_ADC_PH, // Analog PH Sensor
|
||
GPIO_BS814_CLK, GPIO_BS814_DAT, // Holtek BS814A2 touch ctrlr
|
||
GPIO_WIEGAND_D0, GPIO_WIEGAND_D1, // Wiegand Data lines
|
||
GPIO_NEOPOOL_TX, GPIO_NEOPOOL_RX, // Sugar Valley RS485 interface
|
||
GPIO_SDM72_TX, GPIO_SDM72_RX, // SDM72 Serial interface
|
||
GPIO_TM1637CLK, GPIO_TM1637DIO, // TM1637 interface
|
||
GPIO_PROJECTOR_CTRL_TX, GPIO_PROJECTOR_CTRL_RX, // LCD/DLP Projector Serial Control
|
||
GPIO_SSD1351_DC,
|
||
GPIO_XPT2046_CS, // XPT2046 SPI Chip Select
|
||
GPIO_CSE7761_TX, GPIO_CSE7761_RX, // CSE7761 Serial interface (Dual R3)
|
||
GPIO_VL53LXX_XSHUT1, // VL53LXX_XSHUT (the max number of sensors is VL53LXX_MAX_SENSORS)- Used when connecting multiple VL53LXX
|
||
GPIO_MAX7219CLK, GPIO_MAX7219DIN, GPIO_MAX7219CS, // MAX7219 interface
|
||
GPIO_TFMINIPLUS_TX, GPIO_TFMINIPLUS_RX, // TFmini Plus ToF sensor
|
||
GPIO_ZEROCROSS,
|
||
#ifdef ESP32
|
||
GPIO_HALLEFFECT,
|
||
GPIO_EPD_DATA, // Base connection EPD driver
|
||
#endif
|
||
GPIO_INPUT,
|
||
#ifdef ESP32
|
||
GPIO_KEY1_PD, GPIO_KEY1_INV_PD, GPIO_SWT1_PD,
|
||
#endif
|
||
GPIO_I2S_DOUT, GPIO_I2S_BCLK, GPIO_I2S_WS, GPIO_I2S_DIN,
|
||
GPIO_I2S_BCLK_IN, GPIO_I2S_WS_IN, // Spare since 20240603
|
||
GPIO_INTERRUPT,
|
||
GPIO_MCP2515_CS, // MCP2515 Chip Select
|
||
GPIO_HRG15_TX, GPIO_HRG15_RX, // Hydreon RG-15 rain sensor serial interface
|
||
GPIO_VINDRIKTNING_RX, // IKEA VINDRIKTNING Serial interface
|
||
GPIO_BL0939_RX, // BL0939 Serial interface (Dual R3 v2)
|
||
GPIO_BL0942_RX, // BL0942 Serial interface
|
||
GPIO_HM330X_SET, // HM330X SET pin (sleep when low)
|
||
GPIO_HEARTBEAT, GPIO_HEARTBEAT_INV,
|
||
GPIO_SHIFT595_SRCLK, GPIO_SHIFT595_RCLK, GPIO_SHIFT595_OE, GPIO_SHIFT595_SER, // 74x595 Shift register
|
||
GPIO_SOLAXX1_RTS, // Solax Inverter Serial interface
|
||
GPIO_OPTION_E, // Emulated module
|
||
GPIO_SDM230_TX, GPIO_SDM230_RX, // SDM230 Serial interface
|
||
GPIO_ADC_MQ, // Analog MQ Sensor
|
||
GPIO_CM11_TXD, GPIO_CM11_RXD, // CM11 Serial interface
|
||
GPIO_BL6523_TX, GPIO_BL6523_RX, // BL6523 based Watt meter Serial interface
|
||
GPIO_ADE7880_IRQ, // ADE7880 IRQ
|
||
GPIO_RESET, // Generic reset
|
||
GPIO_MS01, // Sonoff MS01 Moisture Sensor 1wire interface
|
||
GPIO_SDIO_CMD, GPIO_SDIO_CLK, GPIO_SDIO_D0, GPIO_SDIO_D1, GPIO_SDIO_D2, GPIO_SDIO_D3, // SD Card SDIO interface, including 1-bit and 4-bit modes
|
||
GPIO_FLOWRATEMETER_IN, // Flowrate Meter
|
||
GPIO_BP5758D_CLK, GPIO_BP5758D_DAT, // BP5758D PWM controller
|
||
GPIO_SM2335_CLK, GPIO_SM2335_DAT, // SM2335 PWM controller
|
||
GPIO_MP3_DFR562_BUSY, // RB-DFR-562, DFPlayer Mini MP3 Player busy flag
|
||
GPIO_TM1621_CS, GPIO_TM1621_WR, GPIO_TM1621_RD, GPIO_TM1621_DAT, // Sonoff POWR3xxD and THR3xxD LCD display
|
||
GPIO_REL1_BI, GPIO_REL1_BI_INV, // 8 x Relays bistable
|
||
GPIO_I2S_MCLK,
|
||
GPIO_MBR_TX, GPIO_MBR_RX, // Modbus Bridge Serial interface
|
||
GPIO_ADE7953_RST, // ADE7953 Reset
|
||
GPIO_NRG_MBS_TX, GPIO_NRG_MBS_RX, // Generic Energy Modbus device
|
||
GPIO_ADE7953_CS, // ADE7953 SPI Chip Select
|
||
GPIO_DALI_RX, GPIO_DALI_TX, // Dali
|
||
GPIO_BP1658CJ_CLK, GPIO_BP1658CJ_DAT,// BP1658CJ
|
||
GPIO_DINGTIAN_CLK, GPIO_DINGTIAN_SDI, GPIO_DINGTIAN_Q7, GPIO_DINGTIAN_PL, GPIO_DINGTIAN_RCK, // Dingtian relay board - 595's & 165's pins
|
||
GPIO_LD2410_TX, GPIO_LD2410_RX, // HLK-LD2410
|
||
GPIO_MBR_TX_ENA, GPIO_NRG_MBS_TX_ENA, // Modbus Bridge Serial Transmit Enable
|
||
GPIO_ME007_TRIG, GPIO_ME007_RX, // ME007 Serial/Trigger interface
|
||
GPIO_TUYAMCUBR_TX, GPIO_TUYAMCUBR_RX, // TuyaMCU Bridge
|
||
GPIO_BIOPDU_PZEM0XX_TX, GPIO_BIOPDU_PZEM016_RX, GPIO_BIOPDU_BIT, // Biomine BioPDU 625x12
|
||
GPIO_MCP23XXX_INT, GPIO_MCP23SXX_CS, // MCP23xxx Int and SPI Chip select
|
||
GPIO_PCF8574_INT, // PCF8574 interrupt
|
||
GPIO_LOX_O2_RX, // LOX-O2 RX
|
||
GPIO_GM861_TX, GPIO_GM861_RX, // GM861 Serial interface
|
||
GPIO_DINGTIAN_OE, // New version of Dingtian relay board where PL is not shared with OE
|
||
GPIO_HDMI_CEC, // Support for HDMI CEC
|
||
GPIO_HC8_RXD, // HC8 Serial interface
|
||
GPIO_I2S_DAC, // Audio DAC support for ESP32 and ESP32S2
|
||
GPIO_MAGIC_SWITCH, // MagicSwitch as in Sonoff BasicR4
|
||
GPIO_PIPSOLAR_TX, GPIO_PIPSOLAR_RX, // pipsolar inverter
|
||
GPIO_LORA_CS, GPIO_LORA_RST, GPIO_LORA_BUSY, GPIO_LORA_DI0, GPIO_LORA_DI1, GPIO_LORA_DI2, GPIO_LORA_DI3, GPIO_LORA_DI4, GPIO_LORA_DI5, // LoRa SPI
|
||
GPIO_TS_SPI_CS, GPIO_TS_RST, GPIO_TS_IRQ, // SPI for Universal Touch Screen
|
||
GPIO_RN2XX3_TX, GPIO_RN2XX3_RX, GPIO_RN2XX3_RST, // RN2XX3 LoRaWan node Serial interface
|
||
GPIO_TCP_TX_EN, // TCP to serial bridge, EN pin
|
||
GPIO_ASR650X_TX, GPIO_ASR650X_RX, // ASR650X LoRaWan node Serial interface
|
||
GPIO_SENSOR_END };
|
||
|
||
// Error as warning to rethink GPIO usage with max 2045
|
||
static_assert(GPIO_SENSOR_END < 2000, "Too many UserSelectablePins");
|
||
|
||
enum ProgramSelectablePins {
|
||
GPIO_FIX_START = 2046,
|
||
GPIO_USER, // User configurable needs to be 2047
|
||
GPIO_MAX };
|
||
|
||
#define MAX_OPTIONS_A 7 // Increase if more bits are used from GpioOptionABits
|
||
|
||
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
|
||
uint32_t data; // Allow bit manipulation using SetOption
|
||
struct { // GPIO Option_A1 .. Option_A32
|
||
uint32_t pwm1_input : 1; // bit 0 (v9.2.0.1) - Option_A1 - (Light) Change PWM1 to input on power off and no fade running (1)
|
||
uint32_t dummy_energy : 1; // bit 1 (v9.3.1.2) - Option_A2 - (Energy) Enable dummy values
|
||
uint32_t udisplay_driver : 1; // bit 2 (v9.3.1.2) - Option_A3 - (Display) Universal display driver
|
||
uint32_t enable_ccloader : 1; // bit 3 (v9.4.0.5) - Option_A4 - (Zigbee) Enable CCLoader using Zigbee Rx/Tx/Rst Gpios
|
||
uint32_t rotary_mi_desk : 1; // bit 4 (v9.5.0.5) - Option_A5 - (Rotary) Enable Mi Desk emulation
|
||
uint32_t linkind_support : 1; // bit 5 (v10.1.0.4) - Option_A6 - (Light) LinkInd support
|
||
uint32_t shelly_pro : 1; // bit 6 (v12.2.0.1) - Option_A7 - (Device) Shelly Pro
|
||
uint32_t spare07 : 1; // bit 7
|
||
uint32_t spare08 : 1; // bit 8
|
||
uint32_t spare09 : 1; // bit 9
|
||
uint32_t spare10 : 1; // bit 10
|
||
uint32_t spare11 : 1; // bit 11
|
||
uint32_t spare12 : 1; // bit 12
|
||
uint32_t spare13 : 1; // bit 13
|
||
uint32_t spare14 : 1; // bit 14
|
||
uint32_t spare15 : 1; // bit 15
|
||
uint32_t spare16 : 1; // bit 16
|
||
uint32_t spare17 : 1; // bit 17
|
||
uint32_t spare18 : 1; // bit 18
|
||
uint32_t spare19 : 1; // bit 19
|
||
uint32_t spare20 : 1; // bit 20
|
||
uint32_t spare21 : 1; // bit 21
|
||
uint32_t spare22 : 1; // bit 22
|
||
uint32_t spare23 : 1; // bit 23
|
||
uint32_t spare24 : 1; // bit 24
|
||
uint32_t spare25 : 1; // bit 25
|
||
uint32_t spare26 : 1; // bit 26
|
||
uint32_t spare27 : 1; // bit 27
|
||
uint32_t spare28 : 1; // bit 28
|
||
uint32_t spare29 : 1; // bit 29
|
||
uint32_t spare30 : 1; // bit 30
|
||
uint32_t spare31 : 1; // bit 31
|
||
};
|
||
} GpioOptionABits;
|
||
|
||
#ifdef ESP32
|
||
enum SupportedEmulationModules {
|
||
SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_S2X, SLAMPHER, SONOFF_TOUCH,
|
||
SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS_DUMMY, SONOFF_DEV, H801,
|
||
SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13,
|
||
SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06,
|
||
SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH,
|
||
OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4,
|
||
OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1,
|
||
SONOFF_IFAN03, EXS_DIMMER, PWM_DIMMER, SONOFF_D1, SONOFF_ZB_BRIDGE,
|
||
MAXMODULE_EMULATION };
|
||
|
||
#define MAX_OPTIONS_E 1 // Increase if more emulated modules are supported from kModuleEmulationList
|
||
|
||
const uint8_t kModuleEmulationList[] PROGMEM = {
|
||
PWM_DIMMER // (v10.1.0.4) - Option_E1 - (Light) USE_PWM_DIMMER support
|
||
};
|
||
#endif // ESP32
|
||
|
||
// Text in webpage Module Parameters and commands GPIOS and GPIO
|
||
const char kSensorNames[] PROGMEM =
|
||
D_SENSOR_NONE "|"
|
||
D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "_n|" D_SENSOR_BUTTON "_i|" D_SENSOR_BUTTON "_in|"
|
||
D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "_n|"
|
||
D_SENSOR_RELAY "|" D_SENSOR_RELAY "_i|"
|
||
D_SENSOR_LED "|" D_SENSOR_LED "_i|"
|
||
D_SENSOR_COUNTER "|" D_SENSOR_COUNTER "_n|"
|
||
D_SENSOR_PWM "|" D_SENSOR_PWM "_i|"
|
||
D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "_i|"
|
||
D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "_i|"
|
||
D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
|
||
D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|"
|
||
D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|"
|
||
D_SENSOR_BACKLIGHT "|" D_SENSOR_DISP_RESET "|"
|
||
D_SENSOR_IRSEND "|" D_SENSOR_IRRECV "|"
|
||
D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|"
|
||
D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DHT11 "_o|"
|
||
D_SENSOR_DS18X20 "|" D_SENSOR_DS18X20 "_o|"
|
||
D_SENSOR_WS2812 "|"
|
||
D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
|
||
D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|"
|
||
D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
|
||
D_SENSOR_PMS5003_TX "|" D_SENSOR_PMS5003_RX "|"
|
||
D_SENSOR_SDS0X1_TX "|" D_SENSOR_SDS0X1_RX "|"
|
||
D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
|
||
D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
|
||
D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
|
||
D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|"
|
||
D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|"
|
||
D_SENSOR_DFR562 "|"
|
||
D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|"
|
||
D_SENSOR_TX2X_TX "|"
|
||
D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|"
|
||
D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|"
|
||
D_SENSOR_RF_SENSOR "|"
|
||
D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|"
|
||
D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|"
|
||
D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "_i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|"
|
||
D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|"
|
||
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|"
|
||
D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|"
|
||
D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|"
|
||
D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|"
|
||
D_SENSOR_ARIRFRCV "|" D_SENSOR_ARIRFSEL "|"
|
||
D_SENSOR_TXD "|" D_SENSOR_RXD "|"
|
||
D_SENSOR_ROTARY " A|" D_SENSOR_ROTARY " B|"
|
||
D_SENSOR_ADC_JOYSTICK "|"
|
||
D_SENSOR_MAX31865_CS "|"
|
||
D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|"
|
||
D_SENSOR_ADE7953_IRQ "|"
|
||
D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|"
|
||
D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|"
|
||
D_SENSOR_RDM6300_RX "|"
|
||
D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|"
|
||
D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|"
|
||
D_SENSOR_OUTPUT_HI "|" D_SENSOR_OUTPUT_LO "|"
|
||
D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|"
|
||
D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|"
|
||
D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|"
|
||
D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|"
|
||
D_SENSOR_CLIENT_TX "|" D_SENSOR_CLIENT_RX "|" D_SENSOR_CLIENT_RESET "|" D_SENSOR_CLIENT_RESET "_i|"
|
||
D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|"
|
||
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|"
|
||
D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|"
|
||
D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|"
|
||
D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|"
|
||
D_SENSOR_HRXL_RX "|"
|
||
D_SENSOR_ELECTRIQ_MOODL "|"
|
||
D_SENSOR_AS3935 "|"
|
||
D_SENSOR_ADC_INPUT "|"
|
||
D_SENSOR_ADC_TEMP "|"
|
||
D_SENSOR_ADC_LIGHT "|"
|
||
D_SENSOR_ADC_BUTTON "|" D_SENSOR_ADC_BUTTON "_i|"
|
||
D_SENSOR_ADC_RANGE "|"
|
||
D_SENSOR_ADC_CT_POWER "|"
|
||
#ifdef ESP32
|
||
D_GPIO_WEBCAM_PWDN "|" D_GPIO_WEBCAM_RESET "|" D_GPIO_WEBCAM_XCLK "|"
|
||
D_GPIO_WEBCAM_SIOD "|" D_GPIO_WEBCAM_SIOC "|"
|
||
D_GPIO_WEBCAM_DATA "|"
|
||
D_GPIO_WEBCAM_VSYNC "|" D_GPIO_WEBCAM_HREF "|" D_GPIO_WEBCAM_PCLK "|"
|
||
D_GPIO_WEBCAM_PSCLK "|"
|
||
D_GPIO_WEBCAM_HSD "|"
|
||
D_GPIO_WEBCAM_PSRCS "|"
|
||
#endif
|
||
D_SENSOR_BOILER_OT_RX "|" D_SENSOR_BOILER_OT_TX "|"
|
||
D_SENSOR_WINDMETER_SPEED "|" D_SENSOR_BUTTON "_tc|"
|
||
D_SENSOR_BL0940_RX "|"
|
||
D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|"
|
||
#ifdef ESP32
|
||
D_SENSOR_ETH_PHY_POWER "|" D_SENSOR_ETH_PHY_MDC "|" D_SENSOR_ETH_PHY_MDIO "|"
|
||
#endif
|
||
D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE "|"
|
||
D_SENSOR_LMT01_PULSE "|"
|
||
D_SENSOR_IEM3000_TX "|" D_SENSOR_IEM3000_RX "|"
|
||
D_SENSOR_ZIGBEE_RST "|"
|
||
D_SENSOR_DYP_RX "|"
|
||
D_SENSOR_MIEL_HVAC_TX "|" D_SENSOR_MIEL_HVAC_RX "|"
|
||
D_SENSOR_WE517_TX "|" D_SENSOR_WE517_RX "|"
|
||
D_SENSOR_AS608_TX "|" D_SENSOR_AS608_RX "|"
|
||
D_SENSOR_SHELLY_DIMMER_BOOT0 "|" D_SENSOR_SHELLY_DIMMER_RST_INV "|"
|
||
D_SENSOR_RC522_RST "|"
|
||
D_SENSOR_P9813_CLK "|" D_SENSOR_P9813_DAT "|"
|
||
D_SENSOR_OPTION " A|"
|
||
D_SENSOR_FTC532 "|"
|
||
D_SENSOR_RC522_CS "|"
|
||
D_SENSOR_NRF24_CS "|" D_SENSOR_NRF24_DC "|"
|
||
D_SENSOR_ILI9341_CS "|" D_SENSOR_ILI9341_DC "|"
|
||
D_SENSOR_ILI9488_CS "|"
|
||
D_SENSOR_EPAPER29_CS "|"
|
||
D_SENSOR_EPAPER42_CS "|"
|
||
D_SENSOR_SSD1351_CS "|"
|
||
D_SENSOR_RA8876_CS "|"
|
||
D_SENSOR_ST7789_CS "|" D_SENSOR_ST7789_DC "|"
|
||
D_SENSOR_SSD1331_CS "|" D_SENSOR_SSD1331_DC "|"
|
||
D_SENSOR_SDCARD_CS "|"
|
||
D_SENSOR_ROTARY " A_n|" D_SENSOR_ROTARY " B_n|"
|
||
D_SENSOR_ADC_PH "|"
|
||
D_SENSOR_BS814_CLK "|" D_SENSOR_BS814_DAT "|"
|
||
D_SENSOR_WIEGAND_D0 "|" D_SENSOR_WIEGAND_D1 "|"
|
||
D_SENSOR_NEOPOOL_TX "|" D_SENSOR_NEOPOOL_RX "|"
|
||
D_SENSOR_SDM72_TX "|" D_SENSOR_SDM72_RX "|"
|
||
D_SENSOR_TM1637_CLK "|" D_SENSOR_TM1637_DIO "|"
|
||
D_SENSOR_PROJECTOR_CTRL_TX "|" D_SENSOR_PROJECTOR_CTRL_RX "|"
|
||
D_SENSOR_SSD1351_DC "|"
|
||
D_SENSOR_XPT2046_CS "|"
|
||
D_SENSOR_CSE7761_TX "|" D_SENSOR_CSE7761_RX "|"
|
||
D_SENSOR_VL53LXX_XSHUT "|"
|
||
D_SENSOR_MAX7219_CLK "|" D_SENSOR_MAX7219_DIN "|" D_SENSOR_MAX7219_CS "|"
|
||
D_SENSOR_TFMINIPLUS_TX "|" D_SENSOR_TFMINIPLUS_RX "|"
|
||
D_SENSOR_ZEROCROSS "|"
|
||
#ifdef ESP32
|
||
D_SENSOR_HALLEFFECT "|"
|
||
D_SENSOR_EPD_DATA "|"
|
||
#endif
|
||
D_SENSOR_INPUT "|"
|
||
#ifdef ESP32
|
||
D_SENSOR_BUTTON "_d|" D_SENSOR_BUTTON "_id|" D_SENSOR_SWITCH "_d|"
|
||
#endif
|
||
D_SENSOR_I2S_DOUT "|" D_SENSOR_I2S_BCLK "|" D_SENSOR_I2S_WS "|" D_SENSOR_I2S_DIN "|"
|
||
D_SENSOR_I2S_BCLK_IN "|" D_SENSOR_I2S_WS_IN "|"
|
||
D_SENSOR_INTERRUPT "|"
|
||
D_SENSOR_MCP2515_CS "|"
|
||
D_SENSOR_HRG15_TX "|" D_SENSOR_HRG15_RX "|"
|
||
D_SENSOR_VINDRIKTNING_RX "|"
|
||
D_SENSOR_BL0939_RX "|"
|
||
D_SENSOR_BL0942_RX "|"
|
||
D_SENSOR_HM330X_SET "|"
|
||
D_SENSOR_HEARTBEAT "|" D_SENSOR_HEARTBEAT "_i|"
|
||
D_GPIO_SHIFT595_SRCLK "|" D_GPIO_SHIFT595_RCLK "|" D_GPIO_SHIFT595_OE "|" D_GPIO_SHIFT595_SER "|"
|
||
D_SENSOR_SOLAXX1_RTS "|"
|
||
D_SENSOR_OPTION " E|"
|
||
D_SENSOR_SDM230_TX "|" D_SENSOR_SDM230_RX "|"
|
||
D_SENSOR_ADC_MQ "|"
|
||
D_SENSOR_CM11_TX "|" D_SENSOR_CM11_RX "|"
|
||
D_SENSOR_BL6523_TX "|" D_SENSOR_BL6523_RX "|"
|
||
D_SENSOR_ADE7880_IRQ "|"
|
||
D_SENSOR_RESET "|"
|
||
D_SENSOR_MS01 "|"
|
||
D_SENSOR_SDIO_CMD "|"
|
||
D_SENSOR_SDIO_CLK "|"
|
||
D_SENSOR_SDIO_D0 "|"
|
||
D_SENSOR_SDIO_D1 "|"
|
||
D_SENSOR_SDIO_D2 "|"
|
||
D_SENSOR_SDIO_D3 "|"
|
||
D_SENSOR_FLOWRATEMETER "|"
|
||
D_SENSOR_BP5758D_CLK "|" D_SENSOR_BP5758D_DAT "|"
|
||
D_SENSOR_SM2335_CLK "|" D_SENSOR_SM2335_DAT "|"
|
||
D_SENSOR_DFR562_BUSY "|"
|
||
D_GPIO_TM1621_CS "|" D_GPIO_TM1621_WR "|" D_GPIO_TM1621_RD "|" D_GPIO_TM1621_DAT "|"
|
||
D_SENSOR_RELAY "_b|" D_SENSOR_RELAY "_bi|"
|
||
D_SENSOR_I2S_MCLK "|"
|
||
D_SENSOR_MBR_TX "|" D_SENSOR_MBR_RX "|"
|
||
D_SENSOR_ADE7953_RST "|"
|
||
D_SENSOR_NRG_MBS_TX "|" D_SENSOR_NRG_MBS_RX "|"
|
||
D_SENSOR_ADE7953_CS "|"
|
||
D_SENSOR_DALI_RX "|" D_SENSOR_DALI_TX "|"
|
||
D_SENSOR_BP1658CJ_CLK "|" D_SENSOR_BP1658CJ_DAT "|"
|
||
D_GPIO_DINGTIAN_CLK "|" D_GPIO_DINGTIAN_SDI "|" D_GPIO_DINGTIAN_Q7 "|" D_GPIO_DINGTIAN_PL "|" D_GPIO_DINGTIAN_RCK "|"
|
||
D_SENSOR_LD2410_TX "|" D_SENSOR_LD2410_RX "|"
|
||
D_SENSOR_MBR_TX_ENA "|" D_SENSOR_NRG_MBS_TX_ENA "|"
|
||
D_SENSOR_ME007_TRIG "|" D_SENSOR_ME007_RX "|"
|
||
D_SENSOR_TUYAMCUBR_TX "|" D_SENSOR_TUYAMCUBR_RX "|"
|
||
D_SENSOR_BIOPDU_PZEM0XX_TX "|" D_SENSOR_BIOPDU_PZEM016_RX "|" D_SENSOR_BIOPDU_BIT "|"
|
||
D_SENSOR_MCP23XXX_INT "|" D_SENSOR_MCP23SXX_CS "|"
|
||
D_SENSOR_PCF8574_INT "|"
|
||
D_SENSOR_LOX_O2_RX "|"
|
||
D_SENSOR_GM861_TX "|" D_SENSOR_GM861_RX "|"
|
||
D_GPIO_DINGTIAN_OE "|"
|
||
D_SENSOR_HDMI_CEC "|"
|
||
D_SENSOR_HC8_RX "|"
|
||
D_SENSOR_I2S_DAC "|"
|
||
D_GPIO_MAGIC_SWITCH "|"
|
||
D_SENSOR_PIPSOLAR_TX "|" D_SENSOR_PIPSOLAR_RX "|"
|
||
D_GPIO_LORA_CS "|" D_GPIO_LORA_RST "|" D_GPIO_LORA_BUSY "|" D_GPIO_LORA_DI "0|" D_GPIO_LORA_DI "1|" D_GPIO_LORA_DI "2|" D_GPIO_LORA_DI "3|" D_GPIO_LORA_DI "4|" D_GPIO_LORA_DI "5|"
|
||
D_GPIO_TS_SPI_CS "|" D_GPIO_TS_RST "|" D_GPIO_TS_IRQ "|"
|
||
D_GPIO_RN2XX3_TX "|" D_GPIO_RN2XX3_RX "|" D_GPIO_RN2XX3_RST "|"
|
||
D_SENSOR_TCP_TXD_EN "|"
|
||
D_GPIO_ASR650X_TX "|" D_GPIO_ASR650X_RX "|"
|
||
;
|
||
|
||
const char kSensorNamesFixed[] PROGMEM =
|
||
D_SENSOR_USER;
|
||
|
||
// Max number of GPIOs
|
||
#define MAX_MAX31855S 6
|
||
#define MAX_MAX31865S 6
|
||
#define MAX_MCP23XXX 6
|
||
#define MAX_FLOWRATEMETER 2
|
||
#define MAX_A4988_MSS 3
|
||
#define MAX_WEBCAM_DATA 8
|
||
#define MAX_WEBCAM_HSD 3
|
||
#define MAX_SM2135_DAT 10
|
||
#define MAX_SM2335_DAT 16
|
||
#define MAX_DSB 4
|
||
#define MAX_BP1658CJ_DAT 16
|
||
#define MAX_DINGTIAN_SHIFT 4
|
||
#define MAX_MAGIC_SWITCH_MODES 2
|
||
#define MAX_BL0942_RX 8 // Baudrates 1/5 (4800), 2/6 (9600), 3/7 (19200), 4/8 (38400), Support Positive values only 1..4, Support also negative values 5..8
|
||
|
||
const uint16_t kGpioNiceList[] PROGMEM = {
|
||
GPIO_NONE, // Not used
|
||
AGPIO(GPIO_OPTION_A) + MAX_OPTIONS_A, // Device specific options
|
||
#ifdef ESP32
|
||
AGPIO(GPIO_OPTION_E) + MAX_OPTIONS_E, // Device module emulation
|
||
#endif
|
||
AGPIO(GPIO_KEY1) + MAX_KEYS, // Buttons
|
||
AGPIO(GPIO_KEY1_NP) + MAX_KEYS,
|
||
#ifdef ESP32
|
||
AGPIO(GPIO_KEY1_PD) + MAX_KEYS,
|
||
#endif
|
||
AGPIO(GPIO_KEY1_INV) + MAX_KEYS,
|
||
AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS,
|
||
#ifdef ESP32
|
||
AGPIO(GPIO_KEY1_INV_PD) + MAX_KEYS,
|
||
#if defined(SOC_TOUCH_VERSION_1) || defined(SOC_TOUCH_VERSION_2)
|
||
AGPIO(GPIO_KEY1_TC) + MAX_KEYS, // Touch button
|
||
#endif // ESP32 SOC_TOUCH_VERSION_1 or SOC_TOUCH_VERSION_2
|
||
#endif
|
||
AGPIO(GPIO_SWT1) + MAX_SWITCHES, // User connected external switches
|
||
AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES,
|
||
#ifdef ESP32
|
||
AGPIO(GPIO_SWT1_PD) + MAX_SWITCHES,
|
||
#endif
|
||
#ifdef ROTARY_V1
|
||
AGPIO(GPIO_ROT1A) + MAX_ROTARIES, // Rotary A Pin
|
||
AGPIO(GPIO_ROT1B) + MAX_ROTARIES, // Rotary B Pin
|
||
AGPIO(GPIO_ROT1A_NP) + MAX_ROTARIES, // Rotary A Pin No Pullup
|
||
AGPIO(GPIO_ROT1B_NP) + MAX_ROTARIES, // Rotary B Pin No Pullup
|
||
#endif
|
||
AGPIO(GPIO_REL1) + MAX_RELAYS, // Relays
|
||
AGPIO(GPIO_REL1_INV) + MAX_RELAYS,
|
||
AGPIO(GPIO_REL1_BI) + MAX_RELAYS, // Bistable (Latching) two coil relays
|
||
AGPIO(GPIO_REL1_BI_INV) + MAX_RELAYS,
|
||
AGPIO(GPIO_LED1) + MAX_LEDS, // Leds
|
||
AGPIO(GPIO_LED1_INV) + MAX_LEDS,
|
||
#ifdef USE_COUNTER
|
||
AGPIO(GPIO_CNTR1) + MAX_COUNTERS, // Counters
|
||
AGPIO(GPIO_CNTR1_NP) + MAX_COUNTERS,
|
||
#endif
|
||
AGPIO(GPIO_PWM1) + MAX_PWMS, // RGB Red or C Cold White
|
||
AGPIO(GPIO_PWM1_INV) + MAX_PWMS, // or extended PWM for ESP32
|
||
#ifdef USE_BUZZER
|
||
AGPIO(GPIO_BUZZER), // Buzzer
|
||
AGPIO(GPIO_BUZZER_INV), // Inverted buzzer
|
||
#endif
|
||
AGPIO(GPIO_LEDLNK), // Link led
|
||
AGPIO(GPIO_LEDLNK_INV), // Inverted link led
|
||
#ifdef USE_BERRY
|
||
AGPIO(GPIO_INPUT) + MAX_SWITCHES, // Pure digital input to be read via Berry
|
||
AGPIO(GPIO_INTERRUPT) + MAX_SWITCHES, // Interrupt pins to be catched by Berry
|
||
#endif
|
||
AGPIO(GPIO_OUTPUT_HI), // Fixed output high
|
||
AGPIO(GPIO_OUTPUT_LO), // Fixed output low
|
||
AGPIO(GPIO_HEARTBEAT), // Every second pulsed high
|
||
AGPIO(GPIO_HEARTBEAT_INV), // Every second pulsed low
|
||
AGPIO(GPIO_RESET), // Generic reset
|
||
#ifdef USE_FTC532
|
||
AGPIO(GPIO_FTC532), // FTC532 touch input
|
||
#endif
|
||
#ifdef USE_BS814A2
|
||
AGPIO(GPIO_BS814_CLK), // Holtek BS814A2 touch ctrlr
|
||
AGPIO(GPIO_BS814_DAT),
|
||
#endif
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Protocol specifics
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#if defined(USE_DALI) && defined(ESP32)
|
||
AGPIO(GPIO_DALI_RX), // DALI RX
|
||
AGPIO(GPIO_DALI_TX), // DALI TX
|
||
#endif // USE_DALI
|
||
|
||
#ifdef USE_I2C
|
||
AGPIO(GPIO_I2C_SCL) + MAX_I2C, // I2C SCL
|
||
AGPIO(GPIO_I2C_SDA) + MAX_I2C, // I2C SDA
|
||
#ifdef USE_PCF8574
|
||
AGPIO(GPIO_PCF8574_INT), // PCF8574 Interrupt
|
||
#endif // USE_PCF8574
|
||
#endif
|
||
|
||
#if defined(USE_I2S_AUDIO) || defined (USE_I2S)
|
||
AGPIO(GPIO_I2S_MCLK) + MAX_I2S, // I2S master clock
|
||
AGPIO(GPIO_I2S_BCLK) + MAX_I2S, // I2S bit clock
|
||
AGPIO(GPIO_I2S_DOUT) + MAX_I2S, // I2S Out Data
|
||
AGPIO(GPIO_I2S_DAC) + 2, // I2S DAC Output
|
||
AGPIO(GPIO_I2S_WS) + MAX_I2S, // I2S word select
|
||
AGPIO(GPIO_I2S_DIN) + MAX_I2S, // I2S IN Data
|
||
#endif
|
||
|
||
#ifdef USE_SPI
|
||
AGPIO(GPIO_SPI_MISO) + MAX_SPI, // SPI MISO
|
||
AGPIO(GPIO_SPI_MOSI) + MAX_SPI, // SPI MOSI
|
||
AGPIO(GPIO_SPI_CLK) + MAX_SPI, // SPI Clk
|
||
AGPIO(GPIO_SPI_CS) + MAX_SPI, // SPI Chip Select
|
||
AGPIO(GPIO_SPI_DC) + MAX_SPI, // SPI Data Direction
|
||
#ifdef USE_NRF24
|
||
AGPIO(GPIO_NRF24_CS),
|
||
AGPIO(GPIO_NRF24_DC),
|
||
#endif
|
||
#ifdef USE_RC522
|
||
AGPIO(GPIO_RC522_CS), // RC522 Rfid Chip Select
|
||
AGPIO(GPIO_RC522_RST), // RC522 Rfid Reset
|
||
#endif
|
||
#ifdef USE_SDCARD
|
||
AGPIO(GPIO_SDCARD_CS), // SDCard in SPI mode
|
||
#endif // USE_SDCARD
|
||
#if defined(USE_MCP2515) || defined(USE_CANSNIFFER)
|
||
AGPIO(GPIO_MCP2515_CS),
|
||
#endif // USE_MCP2515
|
||
#ifdef USE_MCP23XXX_DRV
|
||
AGPIO(GPIO_MCP23SXX_CS) + MAX_MCP23XXX,
|
||
#endif // USE_MCP23XXX_DRV
|
||
#ifdef USE_SPI_LORA
|
||
AGPIO(GPIO_LORA_CS),
|
||
AGPIO(GPIO_LORA_RST),
|
||
AGPIO(GPIO_LORA_BUSY),
|
||
AGPIO(GPIO_LORA_DI0),
|
||
AGPIO(GPIO_LORA_DI1),
|
||
AGPIO(GPIO_LORA_DI2),
|
||
AGPIO(GPIO_LORA_DI3),
|
||
AGPIO(GPIO_LORA_DI4),
|
||
AGPIO(GPIO_LORA_DI5),
|
||
#endif // USE_SPI_LORA
|
||
#endif // USE_SPI
|
||
|
||
#if defined(USE_SDCARD) && defined(ESP32)
|
||
AGPIO(GPIO_SDIO_CMD), // SDCard in SDIO mode
|
||
AGPIO(GPIO_SDIO_CLK),
|
||
AGPIO(GPIO_SDIO_D0),
|
||
AGPIO(GPIO_SDIO_D1), // (opt) if in 4-bit mode, DAT1-3 are needed
|
||
AGPIO(GPIO_SDIO_D2),
|
||
AGPIO(GPIO_SDIO_D3),
|
||
#endif // USE_SDCARD
|
||
|
||
AGPIO(GPIO_SSPI_MISO), // Software SPI Master Input Client Output
|
||
AGPIO(GPIO_SSPI_MOSI), // Software SPI Master Output Client Input
|
||
AGPIO(GPIO_SSPI_SCLK), // Software SPI Serial Clock
|
||
AGPIO(GPIO_SSPI_CS), // Software SPI Chip Select
|
||
AGPIO(GPIO_SSPI_DC), // Software SPI Data or Command
|
||
|
||
#if defined(USE_DISPLAY) || defined(USE_LVGL)
|
||
#ifdef USE_UNIVERSAL_TOUCH
|
||
AGPIO(GPIO_TS_SPI_CS), // Touch CS
|
||
AGPIO(GPIO_TS_RST), // Touch Reset
|
||
AGPIO(GPIO_TS_IRQ), // Touch IRQ
|
||
#endif // USE_UNIVERSAL_TOUCH
|
||
// REMOVED
|
||
// #ifdef USE_DISPLAY_ILI9341
|
||
// AGPIO(GPIO_ILI9341_CS),
|
||
// AGPIO(GPIO_ILI9341_DC),
|
||
// #endif // USE_DISPLAY_ILI9341
|
||
|
||
#ifdef USE_XPT2046
|
||
AGPIO(GPIO_XPT2046_CS), // XPT2046 SPI Chip Select
|
||
#endif
|
||
|
||
#ifdef USE_DISPLAY_ILI9488
|
||
AGPIO(GPIO_ILI9488_CS),
|
||
#endif // USE_DISPLAY_ILI9488
|
||
#ifdef USE_DISPLAY_EPAPER_29
|
||
AGPIO(GPIO_EPAPER29_CS),
|
||
#endif // USE_DISPLAY_EPAPER_29
|
||
#ifdef USE_DISPLAY_EPAPER_42
|
||
AGPIO(GPIO_EPAPER42_CS),
|
||
#endif // USE_DISPLAY_EPAPER_42
|
||
// REMOVED
|
||
// #ifdef USE_DISPLAY_SSD1351
|
||
// AGPIO(GPIO_SSD1351_CS),
|
||
// AGPIO(GPIO_SSD1351_DC),
|
||
// #endif // USE_DISPLAY_SSD1351
|
||
#ifdef USE_DISPLAY_RA8876
|
||
AGPIO(GPIO_RA8876_CS),
|
||
#endif // USE_DISPLAY_RA8876
|
||
// REMOVED
|
||
// #ifdef USE_DISPLAY_ST7789
|
||
// AGPIO(GPIO_ST7789_CS),
|
||
// AGPIO(GPIO_ST7789_DC),
|
||
// #endif // USE_DISPLAY_ST7789
|
||
// REMOVED
|
||
// #ifdef USE_DISPLAY_SSD1331
|
||
// AGPIO(GPIO_SSD1331_CS),
|
||
// AGPIO(GPIO_SSD1331_DC),
|
||
// #endif // USE_DISPLAY_SSD1331
|
||
#ifdef USE_DISPLAY_MAX7219_MATRIX
|
||
#undef USE_DISPLAY_MAX7219
|
||
#undef USE_DISPLAY_TM1637
|
||
AGPIO(GPIO_MAX7219CLK),
|
||
AGPIO(GPIO_MAX7219DIN),
|
||
AGPIO(GPIO_MAX7219CS),
|
||
#endif // USE_DISPLAY_MAX7219_MATRIX
|
||
#ifdef USE_DISPLAY_MAX7219
|
||
AGPIO(GPIO_MAX7219CLK),
|
||
AGPIO(GPIO_MAX7219DIN),
|
||
AGPIO(GPIO_MAX7219CS),
|
||
#endif // USE_DISPLAY_MAX7219
|
||
#ifdef USE_DISPLAY_TM1637
|
||
AGPIO(GPIO_TM1637CLK),
|
||
AGPIO(GPIO_TM1637DIO),
|
||
AGPIO(GPIO_TM1638CLK),
|
||
AGPIO(GPIO_TM1638DIO),
|
||
AGPIO(GPIO_TM1638STB),
|
||
#endif // USE_DISPLAY_TM1637
|
||
AGPIO(GPIO_BACKLIGHT), // Display backlight control
|
||
AGPIO(GPIO_OLED_RESET), // OLED Display Reset
|
||
#ifdef ESP32
|
||
AGPIO(GPIO_EPD_DATA), // Base connection EPD driver
|
||
#endif
|
||
#endif // USE_DISPLAY
|
||
|
||
#ifdef USE_DISPLAY_TM1621_SONOFF
|
||
// Initial support outside display driver
|
||
AGPIO(GPIO_TM1621_CS),
|
||
AGPIO(GPIO_TM1621_WR),
|
||
AGPIO(GPIO_TM1621_RD),
|
||
AGPIO(GPIO_TM1621_DAT),
|
||
#endif // USE_DISPLAY_TM1621_SONOFF
|
||
|
||
#ifdef USE_MAX31865
|
||
AGPIO(GPIO_SSPI_MAX31865_CS1) + MAX_MAX31865S,
|
||
#endif
|
||
|
||
#ifdef USE_MCP23XXX_DRV
|
||
AGPIO(GPIO_MCP23XXX_INT) + MAX_MCP23XXX,
|
||
#endif
|
||
|
||
#ifdef USE_HDMI_CEC
|
||
AGPIO(GPIO_HDMI_CEC), // HDMI CEC bus
|
||
#endif
|
||
|
||
AGPIO(GPIO_TXD), // Serial interface
|
||
AGPIO(GPIO_RXD), // Serial interface
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Single wire sensors
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef USE_DHT
|
||
AGPIO(GPIO_DHT11), // DHT11
|
||
AGPIO(GPIO_DHT22), // DHT21, DHT22, AM2301, AM2302, AM2321
|
||
AGPIO(GPIO_SI7021), // iTead SI7021
|
||
AGPIO(GPIO_MS01), // Sonoff MS01
|
||
AGPIO(GPIO_DHT11_OUT), // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
|
||
#endif
|
||
#ifdef USE_DS18x20
|
||
AGPIO(GPIO_DSB) + MAX_DSB, // Single wire DS18B20 or DS18S20
|
||
AGPIO(GPIO_DSB_OUT) + MAX_DSB, // Pseudo Single wire DS18B20 or DS18S20
|
||
#endif // USE_DS18x20
|
||
#ifdef USE_LMT01
|
||
AGPIO(GPIO_LMT01), // LMT01, count pulses on GPIO
|
||
#endif
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Light
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef USE_LIGHT
|
||
#ifdef USE_WS2812
|
||
#if (USE_WS2812_HARDWARE == NEO_HW_P9813)
|
||
AGPIO(GPIO_P9813_CLK), // P9813 CLOCK
|
||
AGPIO(GPIO_P9813_DAT), // P9813 DATA
|
||
#else
|
||
AGPIO(GPIO_WS2812) + (MAX_RMT ? MAX_RMT + 1 : 0), // WS2812 Led string, using RMT on ESP32
|
||
#endif // NEO_HW_P9813
|
||
#endif
|
||
#ifdef USE_ARILUX_RF
|
||
AGPIO(GPIO_ARIRFRCV), // AriLux RF Receive input
|
||
AGPIO(GPIO_ARIRFSEL), // Arilux RF Receive input selected
|
||
#endif
|
||
#ifdef USE_MY92X1
|
||
AGPIO(GPIO_DI), // my92x1 PWM input
|
||
AGPIO(GPIO_DCKI), // my92x1 CLK input
|
||
#endif // USE_MY92X1
|
||
#ifdef USE_SM16716
|
||
AGPIO(GPIO_SM16716_CLK), // SM16716 CLOCK
|
||
AGPIO(GPIO_SM16716_DAT), // SM16716 DATA
|
||
AGPIO(GPIO_SM16716_SEL), // SM16716 SELECT
|
||
#endif // USE_SM16716
|
||
#ifdef USE_SM2135
|
||
AGPIO(GPIO_SM2135_CLK), // SM2135 CLOCK
|
||
AGPIO(GPIO_SM2135_DAT) + MAX_SM2135_DAT, // SM2135 DATA
|
||
#endif // USE_SM2135
|
||
#ifdef USE_SM2335
|
||
AGPIO(GPIO_SM2335_CLK), // SM2335 CLOCK
|
||
AGPIO(GPIO_SM2335_DAT) + MAX_SM2335_DAT, // SM2335 DATA
|
||
#endif // USE_SM2335
|
||
#ifdef USE_BP1658CJ
|
||
AGPIO(GPIO_BP1658CJ_CLK), // BP1658CJ CLOCK
|
||
AGPIO(GPIO_BP1658CJ_DAT) + MAX_BP1658CJ_DAT, // BP1658CJ DATA
|
||
#endif // USE_BP1658CJ
|
||
#ifdef USE_BP5758D
|
||
AGPIO(GPIO_BP5758D_CLK), // BP5758D CLOCK
|
||
AGPIO(GPIO_BP5758D_DAT), // BP5758D DATA
|
||
#endif // USE_BP5758D
|
||
#ifdef USE_TUYA_MCU
|
||
AGPIO(GPIO_TUYA_TX), // Tuya Serial interface
|
||
AGPIO(GPIO_TUYA_RX), // Tuya Serial interface
|
||
#endif
|
||
#ifdef USE_EXS_DIMMER
|
||
AGPIO(GPIO_EXS_ENABLE), // EXS MCU Enable
|
||
#endif
|
||
#ifdef USE_ELECTRIQ_MOODL
|
||
AGPIO(GPIO_ELECTRIQ_MOODL_TX),
|
||
#endif
|
||
#ifdef USE_SHELLY_DIMMER
|
||
AGPIO(GPIO_SHELLY_DIMMER_BOOT0),
|
||
AGPIO(GPIO_SHELLY_DIMMER_RST_INV),
|
||
#endif
|
||
#endif // USE_LIGHT
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Transmission sensors
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL)
|
||
AGPIO(GPIO_IRSEND) + MAX_IRSEND, // IR remote
|
||
#if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL)
|
||
AGPIO(GPIO_IRRECV), // IR receiver
|
||
#endif
|
||
#endif
|
||
#ifdef USE_RC_SWITCH
|
||
AGPIO(GPIO_RFSEND), // RF transmitter
|
||
AGPIO(GPIO_RFRECV), // RF receiver
|
||
#endif
|
||
#ifdef USE_RF_SENSOR
|
||
AGPIO(GPIO_RF_SENSOR), // Rf receiver with sensor decoding
|
||
#endif
|
||
#ifdef USE_SR04
|
||
AGPIO(GPIO_SR04_TRIG) + MAX_SR04, // SR04 Tri/TXgger pin
|
||
AGPIO(GPIO_SR04_ECHO) + MAX_SR04, // SR04 Ech/RXo pin
|
||
#endif
|
||
#ifdef USE_ME007
|
||
AGPIO(GPIO_ME007_TRIG), // ME007 Trigger pin (xsns_23_me007.ino)
|
||
AGPIO(GPIO_ME007_RX), // ME007 Rx pin (xsns_23_me007.ino)
|
||
#endif
|
||
#ifdef USE_TM1638
|
||
AGPIO(GPIO_TM1638CLK), // TM1638 Clock
|
||
AGPIO(GPIO_TM1638DIO), // TM1638 Data I/O
|
||
AGPIO(GPIO_TM1638STB), // TM1638 Strobe
|
||
#endif
|
||
#ifdef USE_HX711
|
||
AGPIO(GPIO_HX711_SCK), // HX711 Load Cell clock
|
||
AGPIO(GPIO_HX711_DAT), // HX711 Load Cell data
|
||
#endif
|
||
#ifdef USE_TFMINIPLUS
|
||
AGPIO(GPIO_TFMINIPLUS_TX), // TFmini Plus TX pin
|
||
AGPIO(GPIO_TFMINIPLUS_RX), // TFmini Plus RX pin
|
||
#endif
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Energy sensors
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef USE_ENERGY_SENSOR
|
||
#ifdef USE_HLW8012
|
||
AGPIO(GPIO_NRG_SEL), // HLW8012/HLJ-01 Sel output (1 = Voltage)
|
||
AGPIO(GPIO_NRG_SEL_INV), // HLW8012/HLJ-01 Sel output (0 = Voltage)
|
||
AGPIO(GPIO_NRG_CF1), // HLW8012/HLJ-01 CF1 voltage / current
|
||
AGPIO(GPIO_HLW_CF), // HLW8012 CF power
|
||
AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power
|
||
#endif
|
||
#if defined(USE_I2C) && defined(USE_ADE7880)
|
||
AGPIO(GPIO_ADE7880_IRQ) + 2, // ADE7880 IRQ - (1 = IRQ1, 2 = IRQ2)
|
||
#endif
|
||
#ifdef USE_ADE7953
|
||
#if defined(USE_I2C) || defined(USE_SPI)
|
||
AGPIO(GPIO_ADE7953_IRQ) + 6, // ADE7953 IRQ - (1 = Shelly 2.5, 2 = Shelly EM, 3 = Shelly Plus 2PM, 4 = Shelly Pro 1PM, 5 = Shelly Pro 2PM, 6 = Shelly Pro 4PM)
|
||
AGPIO(GPIO_ADE7953_RST), // ADE7953 Reset
|
||
#ifdef USE_SPI
|
||
AGPIO(GPIO_ADE7953_CS) + 2, // ADE7953 SPI Chip Select (1 = CS1 (1PM, 2PM), 2 = CS2 (2PM))
|
||
#endif // USE_SPI
|
||
#endif // USE_I2C or USE_SPI
|
||
#endif // USE_ADE7953
|
||
#ifdef USE_CSE7761
|
||
AGPIO(GPIO_CSE7761_TX), // CSE7761 Serial interface (Dual R3)
|
||
AGPIO(GPIO_CSE7761_RX), // CSE7761 Serial interface (Dual R3)
|
||
#endif
|
||
#ifdef USE_CSE7766
|
||
AGPIO(GPIO_CSE7766_TX), // CSE7766 Serial interface (S31 and Pow R2)
|
||
AGPIO(GPIO_CSE7766_RX), // CSE7766 Serial interface (S31 and Pow R2)
|
||
#endif
|
||
#ifdef USE_MCP39F501
|
||
AGPIO(GPIO_MCP39F5_TX), // MCP39F501 Serial interface (Shelly2)
|
||
AGPIO(GPIO_MCP39F5_RX), // MCP39F501 Serial interface (Shelly2)
|
||
AGPIO(GPIO_MCP39F5_RST), // MCP39F501 Reset (Shelly2)
|
||
#endif
|
||
AGPIO(GPIO_NRG_MBS_TX_ENA), // Generic Energy Modbus Transmit Enable
|
||
#if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC)
|
||
AGPIO(GPIO_PZEM0XX_TX), // PZEM0XX Serial interface
|
||
#endif
|
||
#ifdef USE_PZEM004T
|
||
AGPIO(GPIO_PZEM004_RX), // PZEM004T Serial interface
|
||
#endif
|
||
#ifdef USE_PZEM_AC
|
||
AGPIO(GPIO_PZEM016_RX), // PZEM-014,016 Serial Modbus interface
|
||
#endif
|
||
#ifdef USE_PZEM_DC
|
||
AGPIO(GPIO_PZEM017_RX), // PZEM-003,017 Serial Modbus interface
|
||
#endif
|
||
#ifdef USE_MODBUS_ENERGY
|
||
AGPIO(GPIO_NRG_MBS_TX), // Generic Energy Modbus device
|
||
AGPIO(GPIO_NRG_MBS_RX),
|
||
#endif
|
||
#ifdef USE_SDM120
|
||
AGPIO(GPIO_SDM120_TX), // SDM120 Serial interface
|
||
AGPIO(GPIO_SDM120_RX), // SDM120 Serial interface
|
||
#endif
|
||
#ifdef USE_SDM630
|
||
AGPIO(GPIO_SDM630_TX), // SDM630 Serial interface
|
||
AGPIO(GPIO_SDM630_RX), // SDM630 Serial interface
|
||
#endif
|
||
#ifdef USE_DDS2382
|
||
AGPIO(GPIO_DDS2382_TX), // DDS2382 Serial interface
|
||
AGPIO(GPIO_DDS2382_RX), // DDS2382 Serial interface
|
||
#endif
|
||
#ifdef USE_DDSU666
|
||
AGPIO(GPIO_DDSU666_TX), // DDSU666 Serial interface
|
||
AGPIO(GPIO_DDSU666_RX), // DDSU666 Serial interface
|
||
#endif // USE_DDSU666
|
||
#ifdef USE_SOLAX_X1
|
||
AGPIO(GPIO_SOLAXX1_TX), // Solax Inverter tx pin
|
||
AGPIO(GPIO_SOLAXX1_RX), // Solax Inverter rx pin
|
||
AGPIO(GPIO_SOLAXX1_RTS), // Solax Inverter RTS pin
|
||
#endif // USE_SOLAX_X1
|
||
#ifdef USE_LE01MR
|
||
AGPIO(GPIO_LE01MR_TX), // F7F LE-01MR energy meter tx pin
|
||
AGPIO(GPIO_LE01MR_RX), // F7F LE-01MR energy meter rx pin
|
||
#endif // IFDEF:USE_LE01MR
|
||
#if defined(USE_BL0940) || defined(USE_BL09XX)
|
||
AGPIO(GPIO_BL0939_RX), // BL0939 Serial interface (Dual R3 v2)
|
||
AGPIO(GPIO_BL0940_RX), // BL0940 Serial interface
|
||
AGPIO(GPIO_BL0942_RX) + MAX_BL0942_RX, // BL0942 Serial interface
|
||
#endif
|
||
#ifdef USE_IEM3000
|
||
AGPIO(GPIO_IEM3000_TX), // IEM3000 Serial interface
|
||
AGPIO(GPIO_IEM3000_RX), // IEM3000 Serial interface
|
||
#endif
|
||
#ifdef USE_WE517
|
||
AGPIO(GPIO_WE517_TX), // WE517 Serial interface
|
||
AGPIO(GPIO_WE517_RX), // WE517 Serial interface
|
||
#endif
|
||
#ifdef USE_SDM72
|
||
AGPIO(GPIO_SDM72_TX), // SDM72 Serial interface
|
||
AGPIO(GPIO_SDM72_RX), // SDM72 Serial interface
|
||
#endif
|
||
AGPIO(GPIO_ZEROCROSS),
|
||
#ifdef USE_SDM230
|
||
AGPIO(GPIO_SDM230_TX), // SDM230 Serial interface
|
||
AGPIO(GPIO_SDM230_RX), // SDM230 Serial interface
|
||
#endif
|
||
#ifdef USE_BL6523
|
||
AGPIO(GPIO_BL6523_TX), // BL6523 based Watt meter Serial interface
|
||
AGPIO(GPIO_BL6523_RX), // BL6523 based Watt meter Serial interface
|
||
#endif
|
||
#endif // USE_ENERGY_SENSOR
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Serial sensors
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef USE_SERIAL_BRIDGE
|
||
AGPIO(GPIO_SBR_TX), // Serial Bridge Serial interface
|
||
AGPIO(GPIO_SBR_RX), // Serial Bridge Serial interface
|
||
#endif
|
||
#ifdef USE_MODBUS_BRIDGE
|
||
AGPIO(GPIO_MBR_TX_ENA), // Modbus Bridge Serial interface
|
||
AGPIO(GPIO_MBR_TX), // Modbus Bridge Serial interface
|
||
AGPIO(GPIO_MBR_RX), // Modbus Bridge Serial interface
|
||
#endif
|
||
#ifdef USE_TCP_BRIDGE
|
||
AGPIO(GPIO_TCP_TX), // TCP Serial bridge
|
||
AGPIO(GPIO_TCP_RX), // TCP Serial bridge
|
||
AGPIO(GPIO_TCP_TX_EN), // TCP Serial bridge EN
|
||
#endif
|
||
#ifdef USE_ZIGBEE
|
||
AGPIO(GPIO_ZIGBEE_TX), // Zigbee Serial interface
|
||
AGPIO(GPIO_ZIGBEE_RX), // Zigbee Serial interface
|
||
AGPIO(GPIO_ZIGBEE_RST) + 2, // Zigbee reset, pin 1 is reset, pin 2 is bootloader mode
|
||
#endif
|
||
#ifdef USE_MHZ19
|
||
AGPIO(GPIO_MHZ_TXD), // MH-Z19 Serial interface
|
||
AGPIO(GPIO_MHZ_RXD), // MH-Z19 Serial interface
|
||
#endif
|
||
#ifdef USE_HC8
|
||
AGPIO(GPIO_HC8_RXD), // HC8 Serial interface
|
||
#endif
|
||
#ifdef USE_SENSEAIR
|
||
AGPIO(GPIO_SAIR_TX), // SenseAir Serial interface
|
||
AGPIO(GPIO_SAIR_RX), // SenseAir Serial interface
|
||
#endif
|
||
#ifdef USE_NOVA_SDS
|
||
AGPIO(GPIO_SDS0X1_TX), // Nova Fitness SDS011 Serial interface
|
||
AGPIO(GPIO_SDS0X1_RX), // Nova Fitness SDS011 Serial interface
|
||
#endif
|
||
#ifdef USE_HPMA
|
||
AGPIO(GPIO_HPMA_TX), // Honeywell HPMA115S0 Serial interface
|
||
AGPIO(GPIO_HPMA_RX), // Honeywell HPMA115S0 Serial interface
|
||
#endif
|
||
#ifdef USE_PMS5003
|
||
AGPIO(GPIO_PMS5003_TX), // Plantower PMS5003 Serial interface
|
||
AGPIO(GPIO_PMS5003_RX), // Plantower PMS5003 Serial interface
|
||
#endif
|
||
#ifdef USE_VINDRIKTNING
|
||
AGPIO(GPIO_VINDRIKTNING_RX), // Ikea Vindriktning
|
||
#endif
|
||
#ifdef USE_HM330X
|
||
AGPIO(GPIO_HM330X_SET), // HM330X Sleep pin (active low)
|
||
#endif
|
||
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR) || defined(USE_WS2300_WIND_SENSOR)
|
||
AGPIO(GPIO_TX2X_TXD_BLACK), // TX20/TX23 Transmission Pin
|
||
#endif
|
||
#ifdef USE_WINDMETER // xsns_68_windmeter.ino
|
||
AGPIO(GPIO_WINDMETER_SPEED),
|
||
#endif
|
||
#ifdef USE_MP3_PLAYER // xdrv_14_mp3.ino
|
||
AGPIO(GPIO_MP3_DFR562), // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface
|
||
AGPIO(GPIO_MP3_DFR562_BUSY), // RB-DFR-562, DFPlayer Mini MP3 Player optional Busy flag
|
||
#endif
|
||
#ifdef USE_AZ7798 // xsns_38_az7798
|
||
AGPIO(GPIO_AZ_TXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
|
||
AGPIO(GPIO_AZ_RXD), // AZ-Instrument 7798 CO2 datalogger Serial interface
|
||
#endif
|
||
#ifdef USE_PN532_HSU // xsns_40_pn532.ino
|
||
AGPIO(GPIO_PN532_TXD), // PN532 HSU Tx
|
||
AGPIO(GPIO_PN532_RXD), // PN532 HSU Rx
|
||
#endif
|
||
#ifdef USE_TASMOTA_CLIENT // xdrv_31_tasmota_client.ino
|
||
AGPIO(GPIO_TASMOTACLIENT_TXD), // Tasmota Client TX
|
||
AGPIO(GPIO_TASMOTACLIENT_RXD), // Tasmota Client RX
|
||
AGPIO(GPIO_TASMOTACLIENT_RST), // Tasmota Client Reset
|
||
AGPIO(GPIO_TASMOTACLIENT_RST_INV), // Tasmota Client Reset Inverted
|
||
#endif
|
||
#ifdef USE_RDM6300 // xsns_51_rdm6300.ino
|
||
AGPIO(GPIO_RDM6300_RX),
|
||
#endif
|
||
#ifdef USE_IBEACON // xsns_52_ibeacon.ino
|
||
AGPIO(GPIO_IBEACON_TX),
|
||
AGPIO(GPIO_IBEACON_RX),
|
||
#endif
|
||
#ifdef USE_GPS // xsns_60_gps.ino
|
||
AGPIO(GPIO_GPS_TX), // GPS serial interface
|
||
AGPIO(GPIO_GPS_RX), // GPS serial interface
|
||
#endif
|
||
#ifdef USE_HM10 // xsns_62_mi_hm10.ino
|
||
AGPIO(GPIO_HM10_TX), // HM10 serial interface
|
||
AGPIO(GPIO_HM10_RX), // HM10 serial interface
|
||
#endif
|
||
#ifdef USE_OPENTHERM // xsns_69_opentherm.ino
|
||
AGPIO(GPIO_BOILER_OT_TX),
|
||
AGPIO(GPIO_BOILER_OT_RX),
|
||
#endif
|
||
#ifdef USE_AS608 // xsns_79_as608.ino
|
||
AGPIO(GPIO_AS608_TX),
|
||
AGPIO(GPIO_AS608_RX),
|
||
#endif
|
||
#ifdef USE_GM861 // xsns_107_gm861.ino
|
||
AGPIO(GPIO_GM861_TX),
|
||
AGPIO(GPIO_GM861_RX),
|
||
#endif
|
||
#ifdef USE_HRG15 // xsns_90_hrg15.ino
|
||
AGPIO(GPIO_HRG15_TX),
|
||
AGPIO(GPIO_HRG15_RX),
|
||
#endif
|
||
#ifdef USE_CM110x // xsns_95_cm110x.ino
|
||
AGPIO(GPIO_CM11_TXD), // CM110x Serial interface
|
||
AGPIO(GPIO_CM11_RXD), // CM110x Serial interface
|
||
#endif
|
||
#ifdef USE_LD2410 // xsns_102_ld2410.ino
|
||
AGPIO(GPIO_LD2410_TX), // HLK-LD2410 Serial interface
|
||
AGPIO(GPIO_LD2410_RX), // HLK-LD2410 Serial interface
|
||
#endif
|
||
#ifdef USE_LOX_O2 // xsns_105_lox_o2.ino
|
||
AGPIO(GPIO_LOX_O2_RX), // LuminOx Oxygen Sensor LOX-O2 Serial interface
|
||
#endif
|
||
#ifdef USE_LORAWAN_RN2XX3
|
||
AGPIO(GPIO_RN2XX3_TX),
|
||
AGPIO(GPIO_RN2XX3_RX),
|
||
AGPIO(GPIO_RN2XX3_RST), // RN2XX3 LoRaWan node Serial interface
|
||
#endif
|
||
#ifdef USE_LORAWAN_ASR650X
|
||
AGPIO(GPIO_ASR650X_TX),
|
||
AGPIO(GPIO_ASR650X_RX), // ASR650X LoRaWan node Serial interface
|
||
#endif
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* Other sensors
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef USE_MGC3130
|
||
AGPIO(GPIO_MGC3130_XFER),
|
||
AGPIO(GPIO_MGC3130_RESET),
|
||
#endif
|
||
#ifdef USE_MAX31855
|
||
AGPIO(GPIO_MAX31855CS) + MAX_MAX31855S, //MAX31855 Serial interface
|
||
AGPIO(GPIO_MAX31855CLK), // MAX31855 Serial interface
|
||
AGPIO(GPIO_MAX31855DO), // MAX31855 Serial interface
|
||
#endif
|
||
#ifdef USE_HRE
|
||
AGPIO(GPIO_HRE_CLOCK),
|
||
AGPIO(GPIO_HRE_DATA),
|
||
#endif
|
||
#ifdef USE_A4988_STEPPER
|
||
AGPIO(GPIO_A4988_DIR), // A4988 direction pin
|
||
AGPIO(GPIO_A4988_STP), // A4988 step pin
|
||
// folowing are not mandatory
|
||
AGPIO(GPIO_A4988_ENA), // A4988 enabled pin
|
||
AGPIO(GPIO_A4988_MS1) + MAX_A4988_MSS, // A4988 microstep pin1 to pin3
|
||
#endif
|
||
#ifdef USE_DEEPSLEEP
|
||
AGPIO(GPIO_DEEPSLEEP),
|
||
#endif
|
||
#ifdef USE_KEELOQ
|
||
AGPIO(GPIO_CC1101_GDO0), // CC1101 pin for RX
|
||
AGPIO(GPIO_CC1101_GDO2), // CC1101 pin for RX
|
||
#endif
|
||
#ifdef USE_HRXL
|
||
AGPIO(GPIO_HRXL_RX),
|
||
#endif
|
||
#ifdef USE_DYP
|
||
AGPIO(GPIO_DYP_RX),
|
||
#endif
|
||
#ifdef USE_AS3935
|
||
AGPIO(GPIO_AS3935), // AS3935 IRQ Pin
|
||
#endif
|
||
#ifdef USE_TELEINFO
|
||
AGPIO(GPIO_TELEINFO_RX),
|
||
AGPIO(GPIO_TELEINFO_ENABLE),
|
||
#endif
|
||
#ifdef USE_MIEL_HVAC
|
||
AGPIO(GPIO_MIEL_HVAC_TX), // Mitsubishi Electric HVAC TX pin
|
||
AGPIO(GPIO_MIEL_HVAC_RX), // Mitsubishi Electric HVAC RX pin
|
||
#endif
|
||
#ifdef USE_TUYAMCUBR
|
||
AGPIO(GPIO_TUYAMCUBR_TX),
|
||
AGPIO(GPIO_TUYAMCUBR_RX),
|
||
#endif
|
||
#ifdef USE_WIEGAND
|
||
AGPIO(GPIO_WIEGAND_D0), // Date line D0 of Wiegand devices
|
||
AGPIO(GPIO_WIEGAND_D1), // Date line D1 of Wiegand devices
|
||
#endif
|
||
#ifdef USE_NEOPOOL
|
||
AGPIO(GPIO_NEOPOOL_TX), // Sugar Valley RS485 Interface
|
||
AGPIO(GPIO_NEOPOOL_RX), // Sugar Valley RS485 Interface
|
||
#endif
|
||
#ifdef USE_PROJECTOR_CTRL
|
||
AGPIO(GPIO_PROJECTOR_CTRL_TX), // LCD/DLP Projector Serial Control
|
||
AGPIO(GPIO_PROJECTOR_CTRL_RX), // LCD/DLP Projector Serial Control
|
||
#endif
|
||
#if defined(USE_VL53L0X) or defined (USE_VL53L1X)
|
||
AGPIO(GPIO_VL53LXX_XSHUT1) + VL53LXX_MAX_SENSORS, // When using multiple VL53LXX.
|
||
#endif
|
||
#ifdef USE_FLOWRATEMETER
|
||
AGPIO(GPIO_FLOWRATEMETER_IN) + MAX_FLOWRATEMETER, // Flow meter Pin
|
||
#endif
|
||
|
||
#ifdef USE_SHIFT595
|
||
AGPIO(GPIO_SHIFT595_SRCLK), // 74x595 shift register
|
||
AGPIO(GPIO_SHIFT595_RCLK),
|
||
AGPIO(GPIO_SHIFT595_OE),
|
||
AGPIO(GPIO_SHIFT595_SER),
|
||
#endif
|
||
|
||
#if defined (ESP32) && defined(USE_DINGTIAN_RELAY)
|
||
AGPIO(GPIO_DINGTIAN_CLK) + MAX_DINGTIAN_SHIFT, // Dingtian Relay board - 8,16,24 or 32 relays & inputs
|
||
AGPIO(GPIO_DINGTIAN_SDI),
|
||
AGPIO(GPIO_DINGTIAN_Q7),
|
||
AGPIO(GPIO_DINGTIAN_PL),
|
||
AGPIO(GPIO_DINGTIAN_OE),
|
||
AGPIO(GPIO_DINGTIAN_RCK),
|
||
#endif
|
||
|
||
#ifdef USE_MAGIC_SWITCH
|
||
AGPIO(GPIO_MAGIC_SWITCH) + MAX_MAGIC_SWITCH_MODES,
|
||
#endif
|
||
|
||
#ifdef USE_PIPSOLAR // xdrv_92_pipsolar.ino
|
||
AGPIO(GPIO_PIPSOLAR_TX), // pipsolar inverter Serial interface
|
||
AGPIO(GPIO_PIPSOLAR_RX), // pipsolar inverter Serial interface
|
||
#endif
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* ESP32 specifics
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef ESP32
|
||
#if CONFIG_IDF_TARGET_ESP32
|
||
AGPIO(GPIO_HALLEFFECT) + 2, // Hall effect sensor connected to GPIO36 and 39
|
||
#endif // CONFIG_IDF_TARGET_ESP32
|
||
#ifdef USE_WEBCAM
|
||
AGPIO(GPIO_WEBCAM_PWDN),
|
||
AGPIO(GPIO_WEBCAM_RESET),
|
||
AGPIO(GPIO_WEBCAM_XCLK),
|
||
AGPIO(GPIO_WEBCAM_SIOD),
|
||
AGPIO(GPIO_WEBCAM_SIOC),
|
||
AGPIO(GPIO_WEBCAM_DATA) + MAX_WEBCAM_DATA,
|
||
AGPIO(GPIO_WEBCAM_VSYNC),
|
||
AGPIO(GPIO_WEBCAM_HREF),
|
||
AGPIO(GPIO_WEBCAM_PCLK),
|
||
AGPIO(GPIO_WEBCAM_PSCLK),
|
||
AGPIO(GPIO_WEBCAM_HSD) + MAX_WEBCAM_HSD,
|
||
AGPIO(GPIO_WEBCAM_PSRCS),
|
||
#endif // USE_WEBCAM
|
||
#ifdef USE_ETHERNET
|
||
AGPIO(GPIO_ETH_PHY_POWER),
|
||
AGPIO(GPIO_ETH_PHY_MDC),
|
||
AGPIO(GPIO_ETH_PHY_MDIO), // Ethernet
|
||
#endif // USE_ETHERNET
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* ESP32 multiple Analog / Digital converter inputs
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
AGPIO(GPIO_ADC_INPUT) + MAX_ADCS, // Analog inputs
|
||
AGPIO(GPIO_ADC_TEMP) + MAX_ADCS, // Thermistor
|
||
AGPIO(GPIO_ADC_LIGHT) + MAX_ADCS, // Light sensor
|
||
AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button
|
||
AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS,
|
||
AGPIO(GPIO_ADC_RANGE) + MAX_ADCS, // Range
|
||
AGPIO(GPIO_ADC_CT_POWER) + MAX_ADCS, // Current
|
||
AGPIO(GPIO_ADC_JOY) + MAX_ADCS, // Joystick
|
||
AGPIO(GPIO_ADC_PH) + MAX_ADCS, // Analog PH Sensor
|
||
AGPIO(GPIO_ADC_MQ) + MAX_ADCS, // Analog MQ Sensor
|
||
|
||
#ifdef USE_BIOPDU
|
||
AGPIO(GPIO_BIOPDU_PZEM0XX_TX), // Biomine BioPDU pins
|
||
AGPIO(GPIO_BIOPDU_PZEM016_RX),
|
||
AGPIO(GPIO_BIOPDU_BIT) + 3,
|
||
#endif
|
||
#endif // ESP32
|
||
};
|
||
|
||
/*-------------------------------------------------------------------------------------------*\
|
||
* ESP8266 single Analog / Digital converter input
|
||
\*-------------------------------------------------------------------------------------------*/
|
||
|
||
#ifdef ESP8266
|
||
const uint16_t kAdcNiceList[] PROGMEM = {
|
||
GPIO_NONE, // Not used
|
||
AGPIO(GPIO_ADC_INPUT), // Analog inputs
|
||
AGPIO(GPIO_ADC_TEMP), // Thermistor
|
||
AGPIO(GPIO_ADC_LIGHT), // Light sensor
|
||
AGPIO(GPIO_ADC_BUTTON) + MAX_KEYS, // Button
|
||
AGPIO(GPIO_ADC_BUTTON_INV) + MAX_KEYS,
|
||
AGPIO(GPIO_ADC_RANGE), // Range
|
||
AGPIO(GPIO_ADC_CT_POWER), // Current
|
||
AGPIO(GPIO_ADC_JOY), // Joystick
|
||
AGPIO(GPIO_ADC_PH), // Analog PH Sensor
|
||
AGPIO(GPIO_ADC_MQ), // Analog MQ Sensor
|
||
};
|
||
#endif // ESP8266
|
||
|
||
// User selectable ADC functionality
|
||
enum UserSelectableAdc {
|
||
ADC_NONE, // Not used
|
||
ADC_INPUT, // Analog input
|
||
ADC_TEMP, // Thermistor
|
||
ADC_LIGHT, // Light sensor
|
||
ADC_BUTTON, // Button
|
||
ADC_BUTTON_INV,
|
||
ADC_RANGE, // Range
|
||
ADC_CT_POWER, // Current
|
||
ADC_JOY, // Joystick
|
||
ADC_PH, // Analog PH Sensor
|
||
ADC_MQ, // Analog MQ Sensor
|
||
// ADC_SWITCH, // Switch
|
||
// ADC_SWITCH_INV,
|
||
ADC_END };
|
||
|
||
/*********************************************************************************************\
|
||
* ATTENTION: No user changeable features beyond this point - do not add templates !!!
|
||
\*********************************************************************************************/
|
||
|
||
#define GPIO_ANY 32 // Any GPIO
|
||
|
||
#ifdef ESP8266
|
||
|
||
#define MAX_GPI8_PIN 17 // Number of supported GPIO (0..16)
|
||
#define FLASH_PINS 6 // Number of flash chip pins
|
||
|
||
#define MAX_GPIO_PIN 18 // Number of supported GPIO (0..16 + ADC0)
|
||
#define ADC0_PIN 17 // Pin number of ADC0
|
||
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
|
||
#define MAX_USER_PINS 14 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 17 // Wemos module
|
||
|
||
const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcFLFLolD6D7D5D8D0A0";
|
||
|
||
typedef struct MYIO8 {
|
||
uint8_t io[MAX_GPI8_PIN];
|
||
} myio8; // 17 bytes
|
||
|
||
typedef struct MYCFGIO8285 {
|
||
uint8_t io[MAX_GPI8_PIN - MIN_FLASH_PINS];
|
||
} mycfgio8285; // 13 bytes
|
||
|
||
typedef struct MYTMPLT8285 {
|
||
mycfgio8285 gp;
|
||
uint8_t flag;
|
||
} mytmplt8285; // 14 bytes
|
||
|
||
typedef struct MYCFGIO8266 {
|
||
uint8_t io[MAX_GPI8_PIN - FLASH_PINS];
|
||
} mycfgio8266; // 11 bytes
|
||
|
||
typedef struct MYTMPLT8266 {
|
||
mycfgio8266 gp;
|
||
uint8_t flag;
|
||
} mytmplt8266; // 12 bytes
|
||
|
||
#endif // ESP8266
|
||
|
||
#ifdef ESP32
|
||
#if CONFIG_IDF_TARGET_ESP32C2
|
||
|
||
/* ****************************************
|
||
* ESP32C2
|
||
* ****************************************/
|
||
#define MAX_GPIO_PIN 21 // Number of supported GPIO
|
||
#define MIN_FLASH_PINS 0 // Number of flash chip pins unusable for configuration (GPIO11 to 17)
|
||
#define MAX_USER_PINS 21 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 91011121314151617181920
|
||
const char PINS_WEMOS[] PROGMEM = "AOAOAOAOAOIOIOIOIOIOIOFLFLFLFLFLFLFLIORXTX";
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32C3
|
||
|
||
/* ****************************************
|
||
* ESP32C3
|
||
* ****************************************/
|
||
#define MAX_GPIO_PIN 22 // Number of supported GPIO
|
||
#define MIN_FLASH_PINS 0 // Number of flash chip pins unusable for configuration (GPIO11 to 17)
|
||
#define MAX_USER_PINS 22 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021
|
||
const char PINS_WEMOS[] PROGMEM = "AOAOAOAOAOAOIOIOIOIOIOFLFLFLFLFLFLFLIOIORXTX";
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32C6
|
||
|
||
/* ****************************************
|
||
* ESP32C6
|
||
* ****************************************/
|
||
#define MAX_GPIO_PIN 31 // Number of supported GPIO
|
||
#define MIN_FLASH_PINS 0 // Number of flash chip pins unusable for configuration (GPIO24 to 30)
|
||
#define MAX_USER_PINS 31 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930
|
||
const char PINS_WEMOS[] PROGMEM = "AOAOAOAOAOAOAOIOIOIOIOIOIOIOIOIOTXRXIOIOIOIOIOIOFLFLFLFLFLFLFL";
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32S2
|
||
|
||
/* ****************************************
|
||
* ESP32S2
|
||
* ****************************************/
|
||
#define MAX_GPIO_PIN 47 // Number of supported GPIO
|
||
#define MIN_FLASH_PINS 11 // Number of flash chip pins unusable for configuration (22-25 don't exist, 26-32 for SPI)
|
||
#define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 910111213141516171819202122232425262728293031323334353637383940414243444546
|
||
const char PINS_WEMOS[] PROGMEM = "IOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOIO--------FLFLFLFLFLFLFLIOIOIOIOIOIOIOIOIOIOIOIOIOI ";
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32S3
|
||
/* ****************************************
|
||
* ESP32S3
|
||
* GPIOs 0..21 + 33..48
|
||
* - 22..25 are not used
|
||
* - 26..32 are used for SPI Flash
|
||
* - 33..37 are used by PSRAM
|
||
* ****************************************/
|
||
#define MAX_GPIO_PIN 49 // Number of supported GPIO, 0..48
|
||
#define MIN_FLASH_PINS 11 // Number of flash chip pins unusable for configuration (22-25 don't exist, 26-32 for SPI)
|
||
#define MAX_USER_PINS 38 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839404142434445464748
|
||
const char PINS_WEMOS[] PROGMEM = "IOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOAOIO--------FLFLFLFLFLFLFLIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIO";
|
||
|
||
#else // not CONFIG_IDF_TARGET_ESP32C2/C3/C6 nor CONFIG_IDF_TARGET_ESP32S2 - ESP32
|
||
|
||
/* ****************************************
|
||
* ESP32 - including Pico
|
||
*
|
||
* The initial template was 0-5 9-10 12-39
|
||
* New template covers 0-27 32-39
|
||
* However to maintain backwards compatibility, the following mapping occures
|
||
* Template GPIO | Phyiscal GPIO
|
||
* 28 | 6
|
||
* 29 | 7
|
||
* 30 | 8
|
||
* 31 | 11
|
||
* ****************************************/
|
||
// Conversion table
|
||
#define ESP32_TEMPLATE_TO_PHY \
|
||
0, 1, 2, 3, 4, 5, \
|
||
9, 10, \
|
||
12, 13, 14, 15, 16, 17, 18, 19, \
|
||
20, 21, 22, 23, 24, 25, 26, 27, \
|
||
6, 7, 8, 11, /* 28-31 */ \
|
||
32, 33, 34, 35, 36, 37, 38, 39
|
||
|
||
#define MAX_GPIO_PIN 40 // Number of supported GPIO
|
||
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
|
||
#define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS
|
||
#define WEMOS_MODULE 0 // Wemos module
|
||
|
||
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839
|
||
const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOFLFLFLFLFLFLIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIO--------AOAOIAIAIAIAIAIA";
|
||
|
||
#endif // ESP32/S2/C2/C3/C6 selection
|
||
#endif // ESP32
|
||
|
||
/********************************************************************************************\
|
||
* !!! Changes in below type sizes impact Settings layout - Add fill bytes in Settings !!!
|
||
\********************************************************************************************/
|
||
|
||
typedef struct MYIO {
|
||
uint16_t io[MAX_GPIO_PIN];
|
||
} myio; // ESP8266: 18*2 = 36 bytes / ESP32: 40*2 = 80 bytes / ESP32-C3: 22*2 = 44 bytes / ESP32-S2: 47*2 = 94 bytes / ESP32-S3: 49*2 = 98 bytes
|
||
|
||
typedef struct MYCFGIO {
|
||
uint16_t io[MAX_USER_PINS];
|
||
} mycfgio; // ESP8266: 14*2 = 28 bytes / ESP32: 36*2 = 72 bytes / ESP32-C3: 22*2 = 44 bytes / ESP32-S2: 36*2 = 72 bytes / ESP32-S3: 33*2 = 66 bytes
|
||
|
||
#define GPIO_FLAG_USED 0 // Currently no flags used
|
||
|
||
typedef union {
|
||
uint16_t data;
|
||
struct {
|
||
uint16_t spare00 : 1;
|
||
uint16_t spare01 : 1;
|
||
uint16_t spare02 : 1;
|
||
uint16_t spare03 : 1;
|
||
uint16_t spare04 : 1;
|
||
uint16_t spare05 : 1;
|
||
uint16_t spare06 : 1;
|
||
uint16_t spare07 : 1;
|
||
uint16_t spare08 : 1;
|
||
uint16_t spare09 : 1;
|
||
uint16_t spare10 : 1;
|
||
uint16_t spare11 : 1;
|
||
uint16_t spare12 : 1;
|
||
uint16_t spare13 : 1;
|
||
uint16_t spare14 : 1;
|
||
uint16_t spare15 : 1;
|
||
};
|
||
} gpio_flag; // 2 bytes
|
||
|
||
typedef struct MYTMPLT {
|
||
mycfgio gp; // 28 / 72 / 44 / 72 bytes
|
||
gpio_flag flag; // 2 bytes
|
||
} mytmplt; // 30 / 74 / 46 / 74 bytes
|
||
|
||
//********************************************************************************************
|
||
|
||
#ifdef ESP8266
|
||
#include "include/tasmota_template_legacy.h"
|
||
|
||
/********************************************************************************************\
|
||
* ESP8266 Module Templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported ESP8266 hardware modules
|
||
enum SupportedModulesESP8266 {
|
||
SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_S2X, SLAMPHER, SONOFF_TOUCH,
|
||
SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS, SONOFF_DEV, H801,
|
||
SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13,
|
||
SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06,
|
||
SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH,
|
||
OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4,
|
||
OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1,
|
||
SONOFF_IFAN03, EXS_DIMMER, PWM_DIMMER, SONOFF_D1, SONOFF_ZB_BRIDGE,
|
||
MAXMODULE };
|
||
|
||
const char kModuleNames[] PROGMEM =
|
||
"Sonoff Basic|Sonoff RF|Sonoff SV|Sonoff TH|Sonoff Dual|Sonoff Pow|Sonoff 4CH|Sonoff S2X|Slampher|Sonoff Touch|"
|
||
"Sonoff LED|1 Channel|4 Channel|Motor C/AC|ElectroDragon|EXS Relay(s)|WiOn|Generic|Sonoff Dev|H801|"
|
||
"Sonoff SC|Sonoff BN-SZ|Sonoff 4CH Pro|Huafan SS|Sonoff Bridge|Sonoff B1|AiLight|Sonoff T1 1CH|Sonoff T1 2CH|Sonoff T1 3CH|"
|
||
"Supla Espablo|Witty Cloud|Yunshan Relay|MagicHome|Luani HVIO|KMC 70011|Arilux LC01|Arilux LC11|Sonoff Dual R2|Arilux LC06|"
|
||
"Sonoff S31|Zengge WF017|Sonoff Pow R2|Sonoff iFan02|BlitzWolf SHP|Shelly 1|Shelly 2|Xiaomi Philips|Neo Coolcam|ESP Switch|"
|
||
"OBI Socket|Teckin|AplicWDP303075|Tuya MCU|Gosund SP1 v23|ARMTR Dimmer|SK03 Outdoor|PS-16-DZ|Teckin US|Manzoku strip|"
|
||
"OBI Socket 2|YTF IR Bridge|Digoo DG-SP202|KA10|Luminea ZX2820|Mi Desk Lamp|SP10|WAGA CHCZ02MB|SYF05|Sonoff L1|"
|
||
"Sonoff iFan03|EXS Dimmer|PWM Dimmer|Sonoff D1|Sonoff ZbBridge"
|
||
;
|
||
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
SONOFF_BASIC, // Sonoff Relay Devices
|
||
SONOFF_RF,
|
||
SONOFF_TH,
|
||
SONOFF_DUAL,
|
||
SONOFF_DUAL_R2,
|
||
SONOFF_POW,
|
||
SONOFF_POW_R2,
|
||
SONOFF_4CH,
|
||
SONOFF_4CHPRO,
|
||
SONOFF_S31, // Sonoff Socket Relay Devices with Energy Monitoring
|
||
SONOFF_S2X, // Sonoff Socket Relay Devices
|
||
SONOFF_TOUCH, // Sonoff Switch Devices
|
||
SONOFF_T11,
|
||
SONOFF_T12,
|
||
SONOFF_T13,
|
||
#ifdef USE_SONOFF_D1
|
||
SONOFF_D1, // Sonoff D1
|
||
#endif
|
||
SONOFF_LED, // Sonoff Light Devices
|
||
SONOFF_BN,
|
||
#ifdef USE_SONOFF_L1
|
||
SONOFF_L1,
|
||
#endif
|
||
SONOFF_B1, // Sonoff Light Bulbs
|
||
SLAMPHER,
|
||
#ifdef USE_SONOFF_SC
|
||
SONOFF_SC, // Sonoff Environmemtal Sensor
|
||
#endif
|
||
#ifdef USE_SONOFF_IFAN
|
||
SONOFF_IFAN02, // Sonoff Fan
|
||
SONOFF_IFAN03,
|
||
#endif
|
||
#ifdef USE_SONOFF_RF
|
||
SONOFF_BRIDGE, // Sonoff Bridge
|
||
#endif
|
||
#ifdef USE_ZIGBEE_EZSP
|
||
SONOFF_ZB_BRIDGE,
|
||
#endif
|
||
SONOFF_SV, // Sonoff Development Devices
|
||
SONOFF_DEV,
|
||
CH1, // Relay Devices
|
||
CH4,
|
||
MOTOR,
|
||
ELECTRODRAGON,
|
||
EXS_RELAY,
|
||
SUPLA1,
|
||
LUANIHVIO,
|
||
YUNSHAN,
|
||
WION,
|
||
SHELLY1,
|
||
SHELLY2,
|
||
BLITZWOLF_BWSHP, // Socket Relay Devices with Energy Monitoring
|
||
TECKIN,
|
||
TECKIN_US,
|
||
APLIC_WDP303075,
|
||
GOSUND,
|
||
ZX2820,
|
||
SK03_TUYA,
|
||
DIGOO,
|
||
KA10,
|
||
SP10,
|
||
WAGA,
|
||
NEO_COOLCAM, // Socket Relay Devices
|
||
OBI,
|
||
OBI2,
|
||
MANZOKU_EU_4,
|
||
ESP_SWITCH, // Switch Devices
|
||
#ifdef USE_TUYA_MCU
|
||
TUYA_DIMMER, // Dimmer Devices
|
||
#endif
|
||
#ifdef USE_ARMTRONIX_DIMMERS
|
||
ARMTRONIX_DIMMERS,
|
||
#endif
|
||
#ifdef USE_PS_16_DZ
|
||
PS_16_DZ,
|
||
#endif
|
||
#ifdef USE_EXS_DIMMER
|
||
EXS_DIMMER,
|
||
#endif
|
||
#ifdef USE_PWM_DIMMER
|
||
PWM_DIMMER,
|
||
#endif
|
||
H801, // Light Devices
|
||
MAGICHOME,
|
||
ARILUX_LC01,
|
||
ARILUX_LC06,
|
||
ARILUX_LC11,
|
||
ZENGGE_ZF_WF017,
|
||
HUAFAN_SS,
|
||
#ifdef ROTARY_V1
|
||
MI_DESK_LAMP,
|
||
#endif
|
||
KMC_70011,
|
||
AILIGHT, // Light Bulbs
|
||
PHILIPS,
|
||
SYF05,
|
||
YTF_IR_BRIDGE,
|
||
WITTY, // Development Devices
|
||
WEMOS
|
||
};
|
||
|
||
enum SupportedTemplates8285 {
|
||
TMP_SONOFF_BASIC, TMP_SONOFF_SV, TMP_SONOFF_DUAL, TMP_SONOFF_POW, TMP_SONOFF_LED, TMP_ELECTRODRAGON,
|
||
TMP_EXS_RELAY, TMP_WION, TMP_SONOFF_DEV, TMP_H801, TMP_SONOFF_SC, TMP_SONOFF_BN, TMP_HUAFAN_SS, TMP_SONOFF_BRIDGE,
|
||
TMP_SONOFF_B1, TMP_AILIGHT, TMP_SONOFF_T11, TMP_SUPLA1, TMP_WITTY, TMP_YUNSHAN, TMP_MAGICHOME,
|
||
TMP_LUANIHVIO, TMP_KMC_70011, TMP_ARILUX_LC01, TMP_ARILUX_LC11, TMP_ARILUX_LC06, TMP_ZENGGE_ZF_WF017,
|
||
TMP_SONOFF_POW_R2, TMP_BLITZWOLF_BWSHP, TMP_SHELLY1, TMP_SHELLY2, TMP_PHILIPS, TMP_NEO_COOLCAM, TMP_ESP_SWITCH, TMP_OBI,
|
||
TMP_TECKIN, TMP_APLIC_WDP303075, TMP_TUYA_DIMMER, TMP_GOSUND, TMP_ARMTRONIX_DIMMERS, TMP_SK03_TUYA, TMP_PS_16_DZ,
|
||
TMP_TECKIN_US, TMP_MANZOKU_EU_4, TMP_OBI2, TMP_YTF_IR_BRIDGE, TMP_DIGOO, TMP_KA10, TMP_ZX2820, TMP_MI_DESK_LAMP, TMP_SP10,
|
||
TMP_WAGA, TMP_SYF05, TMP_EXS_DIMMER, TMP_PWM_DIMMER, TMP_SONOFF_ZB_BRIDGE,
|
||
TMP_MAXMODULE_8285 };
|
||
|
||
enum SupportedTemplates8266 {
|
||
TMP_WEMOS = TMP_MAXMODULE_8285, TMP_SONOFF_4CH, TMP_SONOFF_T12, TMP_SONOFF_T13, TMP_SONOFF_DUAL_R2, TMP_SONOFF_IFAN03,
|
||
TMP_MAXMODULE_8266 };
|
||
|
||
const uint8_t kModuleTemplateList[MAXMODULE] PROGMEM = {
|
||
TMP_SONOFF_BASIC,
|
||
TMP_SONOFF_BASIC, // SONOFF_RF
|
||
TMP_SONOFF_SV,
|
||
TMP_SONOFF_BASIC, // SONOFF_TH
|
||
TMP_SONOFF_DUAL,
|
||
TMP_SONOFF_POW,
|
||
TMP_SONOFF_4CH,
|
||
TMP_SONOFF_BASIC, // SONOFF_S2X
|
||
TMP_SONOFF_BASIC, // SLAMPHER
|
||
TMP_SONOFF_T11, // SONOFF_TOUCH
|
||
TMP_SONOFF_LED,
|
||
TMP_SONOFF_BASIC, // CH1
|
||
TMP_SONOFF_DUAL, // CH4
|
||
TMP_SONOFF_BASIC, // MOTOR
|
||
TMP_ELECTRODRAGON,
|
||
TMP_EXS_RELAY,
|
||
TMP_WION,
|
||
TMP_WEMOS,
|
||
TMP_SONOFF_DEV,
|
||
TMP_H801,
|
||
TMP_SONOFF_SC,
|
||
TMP_SONOFF_BN,
|
||
TMP_SONOFF_4CH, // SONOFF_4CHPRO
|
||
TMP_HUAFAN_SS,
|
||
TMP_SONOFF_BRIDGE,
|
||
TMP_SONOFF_B1,
|
||
TMP_AILIGHT,
|
||
TMP_SONOFF_T11,
|
||
TMP_SONOFF_T12,
|
||
TMP_SONOFF_T13,
|
||
TMP_SUPLA1,
|
||
TMP_WITTY,
|
||
TMP_YUNSHAN,
|
||
TMP_MAGICHOME,
|
||
TMP_LUANIHVIO,
|
||
TMP_KMC_70011,
|
||
TMP_ARILUX_LC01,
|
||
TMP_ARILUX_LC11,
|
||
TMP_SONOFF_DUAL_R2,
|
||
TMP_ARILUX_LC06,
|
||
TMP_SONOFF_POW_R2, // SONOFF_S31
|
||
TMP_ZENGGE_ZF_WF017,
|
||
TMP_SONOFF_POW_R2,
|
||
TMP_SONOFF_4CH, // SONOFF_IFAN02
|
||
TMP_BLITZWOLF_BWSHP,
|
||
TMP_SHELLY1,
|
||
TMP_SHELLY2,
|
||
TMP_PHILIPS,
|
||
TMP_NEO_COOLCAM,
|
||
TMP_ESP_SWITCH,
|
||
TMP_OBI,
|
||
TMP_TECKIN,
|
||
TMP_APLIC_WDP303075,
|
||
TMP_TUYA_DIMMER,
|
||
TMP_GOSUND,
|
||
TMP_ARMTRONIX_DIMMERS,
|
||
TMP_SK03_TUYA,
|
||
TMP_PS_16_DZ,
|
||
TMP_TECKIN_US,
|
||
TMP_MANZOKU_EU_4,
|
||
TMP_OBI2,
|
||
TMP_YTF_IR_BRIDGE,
|
||
TMP_DIGOO,
|
||
TMP_KA10,
|
||
TMP_ZX2820,
|
||
TMP_MI_DESK_LAMP,
|
||
TMP_SP10,
|
||
TMP_WAGA,
|
||
TMP_SYF05,
|
||
TMP_SONOFF_DUAL, // SONOFF_L1
|
||
TMP_SONOFF_IFAN03,
|
||
TMP_EXS_DIMMER,
|
||
TMP_PWM_DIMMER,
|
||
TMP_SONOFF_DUAL, // SONOFF_D1
|
||
TMP_SONOFF_ZB_BRIDGE,
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
* Templates with 12 usable pins (ESP8266)
|
||
\*********************************************************************************************/
|
||
|
||
const mytmplt8266 kModules8266[TMP_MAXMODULE_8285] PROGMEM = {
|
||
{ // SONOFF_BASIC - Sonoff Basic (ESP8266)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Only available on newer Sonoff Basic R2 V1
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
0, // GPIO05
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0, // GPIO15
|
||
0, // GPIO16
|
||
0 // ADC0 Analog input
|
||
},
|
||
{ // SONOFF_SV - Sonoff SV (ESP8266)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
0,
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
GPI8_USER, // GPIO05 Optional sensor
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0, 0,
|
||
GPI8_USER // ADC0 Analog input
|
||
},
|
||
{ // SONOFF_DUAL - Sonoff Dual (ESP8266)
|
||
GPI8_USER, // GPIO00 Pad
|
||
GPI8_TXD, // GPIO01 Relay control
|
||
0,
|
||
GPI8_RXD, // GPIO03 Relay control
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0,
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0, 0, 0
|
||
},
|
||
{ // SONOFF_POW - Sonoff Pow (ESP8266 - HLW8012)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
0, 0, 0, 0,
|
||
GPI8_NRG_SEL, // GPIO05 HLW8012 Sel output (1 = Voltage)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
|
||
GPI8_NRG_CF1, // GPIO13 HLW8012 CF1 voltage / current
|
||
GPI8_HLW_CF, // GPIO14 HLW8012 CF power
|
||
GPI8_LED1, // GPIO15 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0
|
||
},
|
||
{ // SONOFF_LED - Sonoff LED (ESP8266)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
0, 0, 0,
|
||
GPI8_USER, // GPIO04 Optional sensor (PWM3 Green)
|
||
GPI8_USER, // GPIO05 Optional sensor (PWM2 Red)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM1, // GPIO12 Cold light (PWM0 Cold)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_PWM2, // GPIO14 Warm light (PWM1 Warm)
|
||
GPI8_USER, // GPIO15 Optional sensor (PWM4 Blue)
|
||
0, 0
|
||
},
|
||
{ // ELECTRODRAGON - ElectroDragon IoT Relay Board (ESP8266)
|
||
GPI8_KEY2, // GPIO00 Button 2
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_KEY1, // GPIO02 Button 1
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
GPI8_USER, // GPIO05 Optional sensor
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On)
|
||
GPI8_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On)
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
GPI8_USER, // GPIO15 Optional sensor
|
||
GPI8_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) - Link and Power status
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // EXS_RELAY - ES-Store Latching relay(s) (ESP8266)
|
||
// https://ex-store.de/ESP8266-WiFi-Relay-V31
|
||
// V3.1 Module Pin 1 VCC 3V3, Module Pin 6 GND
|
||
// https://ex-store.de/2-Kanal-WiFi-WLan-Relay-V5-Blackline-fuer-Unterputzmontage
|
||
GPI8_USER, // GPIO00 V3.1 Module Pin 8 - V5.0 Module Pin 4
|
||
GPI8_USER, // GPIO01 UART0_TXD V3.1 Module Pin 2 - V5.0 Module Pin 3
|
||
GPI8_USER, // GPIO02 V3.1 Module Pin 7
|
||
GPI8_USER, // GPIO03 UART0_RXD V3.1 Module Pin 3
|
||
GPI8_USER, // GPIO04 V3.1 Module Pin 10 - V5.0 Module Pin 2
|
||
GPI8_USER, // GPIO05 V3.1 Module Pin 9 - V5.0 Module Pin 1
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Relay1 ( 1 = Off)
|
||
GPI8_REL2, // GPIO13 Relay1 ( 1 = On)
|
||
GPI8_USER, // GPIO14 V3.1 Module Pin 5 - V5.0 GPI8_REL3_INV Relay2 ( 1 = Off)
|
||
GPI8_LED1, // GPIO15 V5.0 LED1 - Link and Power status
|
||
GPI8_USER, // GPIO16 V3.1 Module Pin 4 - V5.0 GPI8_REL4_INV Relay2 ( 1 = On)
|
||
0
|
||
},
|
||
{ // WION - Indoor Tap (ESP8266)
|
||
// https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w
|
||
GPI8_USER, // GPIO00 Optional sensor (pm clock)
|
||
0,
|
||
GPI8_LED1, // GPIO02 Green Led (1 = On, 0 = Off) - Link and Power status
|
||
0, 0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12 Optional sensor (pm data)
|
||
GPI8_KEY1, // GPIO13 Button
|
||
0,
|
||
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
|
||
0, 0
|
||
},
|
||
{ // SONOFF_DEV - Sonoff Dev (ESP8266)
|
||
GPI8_KEY1, // GPIO00 E-FW Button
|
||
GPI8_USER, // GPIO01 TX Serial RXD and Optional sensor
|
||
0, // GPIO02
|
||
GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
GPI8_USER, // GPIO05 Optional sensor
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12
|
||
GPI8_USER, // GPIO13 BLUE LED
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0, // GPIO15
|
||
0, // GPIO16
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // H801 - Lixada H801 Wifi (ESP8266)
|
||
GPI8_USER, // GPIO00 E-FW Button
|
||
GPI8_LED1, // GPIO01 Green LED - Link and Power status
|
||
GPI8_USER, // GPIO02 TX and Optional sensor - Pin next to TX on the PCB
|
||
GPI8_USER, // GPIO03 RX and Optional sensor - Pin next to GND on the PCB
|
||
GPI8_PWM5, // GPIO04 W2 - PWM5
|
||
GPI8_LED2_INV, // GPIO05 Red LED
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM3, // GPIO12 Blue
|
||
GPI8_PWM2, // GPIO13 Green
|
||
GPI8_PWM4, // GPIO14 W1 - PWM4
|
||
GPI8_PWM1, // GPIO15 Red
|
||
0, 0
|
||
},
|
||
{ // SONOFF_SC - onoff SC (ESP8266)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
GPI8_TXD, // GPIO01 RXD to ATMEGA328P
|
||
GPI8_USER, // GPIO02 Optional sensor
|
||
GPI8_RXD, // GPIO03 TXD to ATMEGA328P
|
||
0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0,
|
||
GPI8_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SONOFF_BN - Sonoff BN-SZ01 Ceiling led (ESP8285)
|
||
0, 0, 0, 0, 0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM1, // GPIO12 Light
|
||
GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // HUAFAN_SS - Hua Fan Smart Socket (ESP8266) - like Sonoff Pow
|
||
GPI8_LEDLNK_INV, // GPIO00 Blue Led (0 = On, 1 = Off) - Link status
|
||
0, 0,
|
||
GPI8_LED1_INV, // GPIO03 Red Led (0 = On, 1 = Off) - Power status
|
||
GPI8_KEY1, // GPIO04 Button
|
||
GPI8_REL1_INV, // GPIO05 Relay (0 = On, 1 = Off)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_CF1, // GPIO12 HLW8012 CF1 voltage / current
|
||
GPI8_NRG_SEL, // GPIO13 HLW8012 Sel output (1 = Voltage)
|
||
GPI8_HLW_CF, // GPIO14 HLW8012 CF power
|
||
0, 0, 0
|
||
},
|
||
{ // SONOFF_BRIDGE - Sonoff RF Bridge 433 (ESP8285)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
GPI8_TXD, // GPIO01 RF bridge control
|
||
GPI8_USER, // GPIO02 Optional sensor
|
||
GPI8_RXD, // GPIO03 RF bridge control
|
||
GPI8_USER, // GPIO04 Optional sensor
|
||
GPI8_USER, // GPIO05 Optional sensor
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12 Optional sensor
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0, 0, 0
|
||
},
|
||
{ // SONOFF_B1 - Sonoff B1 (ESP8285 - my9231)
|
||
GPI8_KEY1, // GPIO00 Pad
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad
|
||
GPI8_USER, // GPIO02 Optional sensor SDA pad
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad
|
||
0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_DI, // GPIO12 my9231 DI
|
||
0,
|
||
GPI8_DCKI, // GPIO14 my9231 DCKI
|
||
0, 0, 0
|
||
},
|
||
{ // AILIGHT - Ai-Thinker RGBW led (ESP8266 - my9291)
|
||
GPI8_KEY1, // GPIO00 Pad
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor pad
|
||
GPI8_USER, // GPIO02 Optional sensor SDA pad
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor pad
|
||
0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0,
|
||
GPI8_DI, // GPIO13 my9291 DI
|
||
0,
|
||
GPI8_DCKI, // GPIO15 my9291 DCKI
|
||
0, 0
|
||
},
|
||
{ // SONOFF_T11 - Sonoff T1 1CH (ESP8285)
|
||
GPI8_KEY1, // GPIO00 Button 1
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SUPLA1 - Supla Espablo (ESP8266)
|
||
// http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/
|
||
0, // GPIO00 Flash jumper
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
#ifdef USE_DS18x20
|
||
GPI8_DSB, // GPIO02 DS18B20 sensor
|
||
#else
|
||
GPI8_USER, // GPIO02 Optional sensor
|
||
#endif
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_KEY1, // GPIO04 Button 1
|
||
GPI8_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12 Optional sensor
|
||
GPI8_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On)
|
||
GPI8_USER, // GPIO14 Optional sensor
|
||
0,
|
||
GPI8_LED1, // GPIO16 Led (1 = On, 0 = Off) - Link and Power status
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // WITTY - Witty Cloud Dev Board (ESP8266)
|
||
// https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html
|
||
GPI8_USER, // GPIO00 D3 flash push button on interface board
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F - Link and Power status
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_KEY1, // GPIO04 D2 push button on ESP-12F board
|
||
GPI8_USER, // GPIO05 D1 optional sensor
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM2, // GPIO12 D6 RGB LED Green
|
||
GPI8_PWM3, // GPIO13 D7 RGB LED Blue
|
||
GPI8_USER, // GPIO14 D5 optional sensor
|
||
GPI8_PWM1, // GPIO15 D8 RGB LED Red
|
||
GPI8_USER, // GPIO16 D0 optional sensor
|
||
GPI8_USER // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled
|
||
},
|
||
{ // YUNSHAN - Yunshan Wifi Relay (ESP8266)
|
||
// https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381
|
||
// Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/
|
||
0, // GPIO00 Flash jumper - Module Pin 8
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2
|
||
GPI8_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 - Link and Power status
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3
|
||
GPI8_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10
|
||
GPI8_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0, 0, 0, 0, 0, 0
|
||
},
|
||
{ // MAGICHOME - Magic Home (aka Flux-light) (ESP8266) and Arilux LC10 (ESP8285)
|
||
// https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
|
||
0,
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_LED1_INV, // GPIO02 Blue onboard LED - Link and Power status
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional) (Arilux LC10)
|
||
GPI8_PWM2, // GPIO05 RGB LED Green
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM3, // GPIO12 RGB LED Blue
|
||
GPI8_USER, // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White as used on Arilux LC10)
|
||
GPI8_PWM1, // GPIO14 RGB LED Red
|
||
GPI8_ARIRFSEL, // GPIO15 RF receiver control (Arilux LC10)
|
||
0, 0
|
||
},
|
||
{ // LUANIHVIO - ESP8266_HVIO
|
||
// https://luani.de/projekte/esp8266-hvio/
|
||
0, // GPIO00 Flash jumper
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Optional sensor / I2C SDA pad
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_REL1, // GPIO04 Relay 1 (0 = Off, 1 = On)
|
||
GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_SWT1, // GPIO12 External input 1 (0 = On, 1 = Off)
|
||
GPI8_SWT2, // GPIO13 External input 2 (0 = On, 1 = Off)
|
||
GPI8_USER, // GPIO14 Optional sensor / I2C SCL pad
|
||
GPI8_LED1, // GPIO15 Led (1 = On, 0 = Off) - Link and Power status
|
||
0,
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // KMC_70011 - KMC 70011
|
||
// https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ
|
||
GPI8_KEY1, // GPIO00 Button
|
||
0, 0, 0,
|
||
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
|
||
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL, // GPIO12 HLW8012 SEL (1 = Voltage)
|
||
GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status
|
||
GPI8_REL1, // GPIO14 Relay
|
||
0, 0, 0
|
||
},
|
||
{ // ARILUX_LC01 - Arilux AL-LC01 (ESP8285)
|
||
// https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html
|
||
// (PwmFrequency 1111Hz)
|
||
GPI8_KEY1, // GPIO00 Optional Button
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_ARIRFSEL, // GPIO02 RF receiver control
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_ARIRFRCV, // GPIO04 IR or RF receiver (optional)
|
||
GPI8_PWM1, // GPIO05 RGB LED Red
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM2, // GPIO12 RGB LED Green
|
||
GPI8_PWM3, // GPIO13 RGB LED Blue
|
||
GPI8_USER, // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
|
||
0, 0, 0
|
||
},
|
||
{ // ARILUX_LC11 - Arilux AL-LC11 (ESP8266)
|
||
// https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html
|
||
// (PwmFrequency 540Hz)
|
||
GPI8_KEY1, // GPIO00 Optional Button
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_ARIRFSEL, // GPIO02 RF receiver control
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_PWM2, // GPIO04 RGB LED Green
|
||
GPI8_PWM1, // GPIO05 RGB LED Red
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM5, // GPIO12 RGBCW LED Warm
|
||
GPI8_PWM4, // GPIO13 RGBW LED Cold
|
||
GPI8_PWM3, // GPIO14 RGB LED Blue
|
||
GPI8_ARIRFRCV, // GPIO15 RF receiver input
|
||
0, 0
|
||
},
|
||
{ // ARILUX_LC06 - Arilux AL-LC06 (ESP8285)
|
||
// https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html
|
||
GPI8_KEY1, // GPIO00 Optional Button
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Empty pad
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 W2 - PWM5
|
||
0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM2, // GPIO12 RGB LED Green
|
||
GPI8_PWM3, // GPIO13 RGB LED Blue
|
||
GPI8_PWM1, // GPIO14 RGB LED Red
|
||
GPI8_USER, // GPIO15 RGBW LED White
|
||
0, 0
|
||
},
|
||
{ // ZENGGE_ZF_WF017 - Zenggee ZJ-WF017-A (ESP12S))
|
||
// https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644
|
||
GPI8_KEY1, // GPIO00 Optional Button
|
||
0,
|
||
GPI8_USER, // GPIO02 Empty pad
|
||
0,
|
||
GPI8_USER, // GPIO04 W2 - PWM5
|
||
0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM2, // GPIO12 RGB LED Green
|
||
GPI8_PWM1, // GPIO13 RGB LED Red
|
||
GPI8_PWM3, // GPIO14 RGB LED Blue
|
||
0, 0, 0
|
||
},
|
||
{ // SONOFF_POW_R2 - Sonoff Pow R2 (ESP8285 - CSE7766)
|
||
GPI8_KEY1, // GPIO00 Button
|
||
GPI8_CSE7766_TX, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor
|
||
0,
|
||
GPI8_CSE7766_RX, // GPIO03 Serial TXD
|
||
0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // BLITZWOLF_BWSHP - BlitzWolf BW-SHP2 and BW-SHP6 (ESP8285 - BL0937 or HJL-01 Energy Monitoring)
|
||
// https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html
|
||
// https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG/ref=sr_1_fkmr0_1
|
||
// https://www.amazon.de/Intelligente-Stromverbrauch-Fernsteurung-Schaltbare-Energieklasse/dp/B076WZQS4S/ref=sr_1_1
|
||
// https://www.aliexpress.com/store/product/BlitzWolf-BW-SHP6-EU-Plug-Metering-Version-WIFI-Smart-Socket-220V-240V-10A-Work-with-Amazon/1965360_32945504669.html
|
||
GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
0,
|
||
GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
|
||
GPI8_KEY1, // GPIO13 Button
|
||
GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage
|
||
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
|
||
0, 0
|
||
},
|
||
{ // SHELLY1 - Shelly1 Open Source (ESP8266 - 2MB) - https://shelly.cloud/shelly1-open-source/
|
||
GPI8_USER, // GPIO00 - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
|
||
GPI8_USER, // GPIO01 Serial RXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
|
||
0,
|
||
GPI8_USER, // GPIO03 Serial TXD - Can be changed to GPI8_USER, only if Shelly is powered with 12V DC
|
||
GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On)
|
||
GPI8_SWT1_NP, // GPIO05 SW pin
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0, 0, 0, 0, 0, 0
|
||
},
|
||
{ // SHELLY2 - Shelly2 (ESP8266 - 2MB) - https://shelly.cloud/shelly2/
|
||
0,
|
||
GPI8_MCP39F5_TX, // GPIO01 MCP39F501 Serial input
|
||
0,
|
||
GPI8_MCP39F5_RX, // GPIO03 MCP39F501 Serial output
|
||
GPI8_REL1, // GPIO04
|
||
GPI8_REL2, // GPIO05
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_SWT1, // GPIO12
|
||
0,
|
||
GPI8_SWT2, // GPIO14
|
||
GPI8_MCP39F5_RST, // GPIO15 MCP39F501 Reset
|
||
0,
|
||
0
|
||
},
|
||
{ // PHILIPS - Xiaomi Philips bulb (ESP8266)
|
||
0, 0, 0, 0, 0, 0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_PWM2, // GPIO12 cold/warm light
|
||
0, 0,
|
||
GPI8_PWM1, // GPIO15 light intensity
|
||
0, 0
|
||
},
|
||
{ // NEO_COOLCAM - Neo Coolcam (ESP8266)
|
||
// https://www.banggood.com/NEO-COOLCAM-WiFi-Mini-Smart-Plug-APP-Remote-Control-Timing-Smart-Socket-EU-Plug-p-1288562.html?cur_warehouse=CN
|
||
0, 0, 0, 0,
|
||
GPI8_LED1_INV, // GPIO04 Red Led (0 = On, 1 = Off) - Link and Power status
|
||
0,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
|
||
GPI8_KEY1, // GPIO13 Button
|
||
0, 0, 0, 0
|
||
},
|
||
{ // ESP_SWITCH - Michael Haustein 4 channel wall switch (ESP07 = ESP8266)
|
||
// Use rules for further actions like - rule on power1#state do publish cmnd/other_device/power %value% endon
|
||
GPI8_KEY2, // GPIO00 Button 2
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_REL3_INV, // GPIO02 Yellow Led 3 (0 = On, 1 = Off)
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_KEY1, // GPIO04 Button 1
|
||
GPI8_REL2_INV, // GPIO05 Red Led 2 (0 = On, 1 = Off)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL4_INV, // GPIO12 Blue Led 4 (0 = On, 1 = Off)
|
||
GPI8_KEY4, // GPIO13 Button 4
|
||
GPI8_KEY3, // GPIO14 Button 3
|
||
GPI8_LED1, // GPIO15 Optional sensor
|
||
GPI8_REL1_INV, // GPIO16 Green Led 1 (0 = On, 1 = Off)
|
||
0
|
||
},
|
||
{ // OBI - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706
|
||
GPI8_USER, // GPIO00
|
||
GPI8_USER, // GPIO01 Serial RXD
|
||
0,
|
||
GPI8_USER, // GPIO03 Serial TXD
|
||
GPI8_LED1, // GPIO04 Blue LED - Link and Power status
|
||
GPI8_REL1, // GPIO05 (Relay OFF, but used as Relay Switch)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_LED3, // GPIO12 (Relay ON, but set to LOW, so we can switch with GPIO05)
|
||
GPI8_USER, // GPIO13
|
||
GPI8_KEY1, // GPIO14 Button
|
||
0,
|
||
GPI8_USER, // GPIO16
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // TECKIN - https://www.amazon.de/gp/product/B07D5V139R
|
||
0,
|
||
GPI8_KEY1, // GPIO01 Serial TXD and Button
|
||
0,
|
||
GPI8_LED1_INV, // GPIO03 Serial RXD and Red Led (0 = On, 1 = Off) - Power status
|
||
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
|
||
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
|
||
GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status
|
||
GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On)
|
||
0, 0, 0
|
||
},
|
||
{ // APLIC_WDP303075 - Aplic WDP 303075 (ESP8285 - HLW8012 Energy Monitoring)
|
||
// https://www.amazon.de/dp/B07CNWVNJ2
|
||
0, 0, 0,
|
||
GPI8_KEY1, // GPIO03 Button
|
||
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
|
||
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage)
|
||
GPI8_LED1_INV, // GPIO13 LED (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_REL1, // GPIO14 Relay SRU 5VDC SDA (0 = Off, 1 = On )
|
||
0, 0, 0
|
||
},
|
||
{ // TUYA_DIMMER - Tuya MCU device (ESP8266 w/ separate MCU)
|
||
// https://www.amazon.com/gp/product/B07CTNSZZ8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
|
||
GPI8_USER, // Virtual Button (controlled by MCU)
|
||
GPI8_USER, // GPIO01 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_USER, // GPIO03 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
GPI8_USER, // GPIO14 Green Led
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
0
|
||
},
|
||
{ // GOSUND - https://www.amazon.de/gp/product/B0777BWS1P
|
||
0,
|
||
GPI8_LEDLNK_INV, // GPIO01 Serial RXD and LED1 (blue) inv - Link status
|
||
0,
|
||
GPI8_KEY1, // GPIO03 Serial TXD and Button
|
||
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
|
||
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
|
||
GPI8_LED1_INV, // GPIO13 LED2 (red) inv - Power status
|
||
GPI8_REL1, // GPIO14 Relay (0 = Off, 1 = On)
|
||
0, 0, 0
|
||
},
|
||
{ // ARMTRONIX_DIMMERS - ARMTRONIX Dimmer, one or two channel (ESP8266 w/ separate MCU dimmer)
|
||
// https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-two-triac-board/
|
||
// https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-esp8266-one-triac-board-alexaecho/
|
||
GPI8_USER,
|
||
GPI8_TXD, // GPIO01 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_RXD, // GPIO03 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
0
|
||
},
|
||
{ // SK03_TUYA - Outdoor smart plug with power monitoring HLW8012 chip - https://www.amazon.com/gp/product/B07CG7MBPV
|
||
GPI8_KEY1, // GPIO00 Button
|
||
0, 0, 0,
|
||
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
|
||
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage)
|
||
GPI8_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Power status
|
||
GPI8_LEDLNK_INV, // GPIO14 Blue Led (0 = On, 1 = Off) - Link status
|
||
GPI8_REL1, // GPIO15 Relay (0 = Off, 1 = On)
|
||
0, 0
|
||
},
|
||
{ // PS_16_DZ - PS-16-DZ Dimmer (ESP8266 w/ separate Nuvoton MCU dimmer)
|
||
// https://www.aliexpress.com/item/SM-Smart-WIFI-Wall-Dimmer-Light-Switch-US-Ewelink-APP-Remote-Control-Wi-Fi-Wirele-Work/32871151902.html
|
||
GPI8_USER,
|
||
GPI8_TXD, // GPIO01 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_RXD, // GPIO03 MCU serial control
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER,
|
||
GPI8_LED1, // GPIO13 WiFi LED - Link and Power status
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
GPI8_USER,
|
||
0
|
||
},
|
||
{ // TECKIN_US - Teckin SP20 US with Energy Monitoring
|
||
// https://www.amazon.com/Outlet-Compatible-Monitoring-Function-Required/dp/B079Q5W22B
|
||
// https://www.amazon.com/Outlet-ZOOZEE-Monitoring-Function-Compatible/dp/B07J2LR5KN
|
||
GPI8_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status
|
||
0,
|
||
GPI8_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status
|
||
0,
|
||
GPI8_REL1, // GPIO04 Relay (0 = Off, 1 = On)
|
||
GPI8_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
|
||
GPI8_KEY1, // GPIO13 Button
|
||
GPI8_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage
|
||
0, 0, 0
|
||
},
|
||
{ // MANZOKU_EU_4 - "MANZOKU" labeled power strip, EU version
|
||
// https://www.amazon.de/Steckdosenleiste-AOFO-Mehrfachsteckdose-Ãœberspannungsschutz-Sprachsteuerung/dp/B07GBSD11P/
|
||
// https://www.amazon.de/Steckdosenleiste-Geekbes-USB-Anschluss-Kompatibel-gesteuert/dp/B078W23BW9/
|
||
0, // GPIO00
|
||
0, // GPIO01 Serial RXD
|
||
0,
|
||
GPI8_KEY1, // GPIO03 Serial TXD + Button
|
||
GPI8_REL2, // GPIO04 Relay 2
|
||
GPI8_REL1, // GPIO05 Relay 1
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL3, // GPIO12 Relay 3
|
||
GPI8_REL4, // GPIO13 Relay 4
|
||
GPI8_USER, // GPIO14
|
||
0,
|
||
GPI8_USER, // GPIO16
|
||
0
|
||
},
|
||
{ // OBI2 - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-2-stueck-weiss/p/4077673
|
||
0, // GPIO00
|
||
0, // GPIO01 Serial RXD
|
||
0,
|
||
0, // GPIO03 Serial TXD
|
||
GPI8_REL1, // GPIO04 Relay 1
|
||
GPI8_KEY1, // GPIO05 Button
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_LEDLNK_INV, // GPIO12 Green LED - Link status
|
||
GPI8_LED1, // GPIO13 Red LED - Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // YTF_IR_BRIDGE - https://www.aliexpress.com/item/Tuya-universal-Smart-IR-Hub-remote-control-Voice-Control-AC-TV-Work-With-Alexa-Google-Home/32951202513.html
|
||
GPI8_USER, // GPIO00
|
||
GPI8_USER, // GPIO01 Serial RXD
|
||
GPI8_USER, // GPIO02
|
||
GPI8_USER, // GPIO03 Serial TXD
|
||
GPI8_LED1_INV, // GPIO04 Blue Led - Link status
|
||
GPI8_IRRECV, // GPIO05 IR Receiver
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
0, // GPIO12
|
||
GPI8_KEY1, // GPIO13 Button
|
||
GPI8_IRSEND, // GPIO14 IR Transmitter
|
||
0, 0, 0
|
||
},
|
||
{ // DIGOO - Digoo DG-SP202
|
||
// https://www.banggood.com/DIGOO-DG-SP202-Dual-EU-Plug-Smart-WIFI-Socket-Individual-Controllable-Energy-Monitor-Remote-Control-Timing-Smart-Home-Outlet-let-p-1375323.html
|
||
GPI8_KEY1, // GPIO00 Button1
|
||
0, // GPIO01 Serial RXD
|
||
0, // GPIO02
|
||
0, // GPIO03 Serial TXD
|
||
GPI8_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power
|
||
GPI8_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
|
||
GPI8_LED1, // GPIO13 Blue Leds - Link Status
|
||
GPI8_REL2, // GPIO14 Relay2 (0 = Off, 1 = On) and Red Led
|
||
GPI8_REL1, // GPIO15 Relay1 (0 = Off, 1 = On) and Red Led
|
||
GPI8_KEY2_NP, // GPIO16 Button2, externally pulled up
|
||
0
|
||
},
|
||
{ // KA10 - SMANERGY KA10 (ESP8285 - BL0937 Energy Monitoring) - https://www.amazon.es/dp/B07MBTCH2Y
|
||
0, // GPIO00
|
||
GPI8_LEDLNK_INV, // GPIO01 Blue LED - Link status
|
||
0, // GPIO02
|
||
GPI8_KEY1, // GPIO03 Button
|
||
GPI8_HJL_CF, // GPIO04 BL0937 CF power
|
||
GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage)
|
||
GPI8_LED1, // GPIO13 Red LED - Power status
|
||
GPI8_REL1, // GPIO14 Relay 1
|
||
0, 0, 0
|
||
},
|
||
{ // ZX2820
|
||
GPI8_KEY1, // GPIO00 Button
|
||
0, 0, 0,
|
||
GPI8_HLW_CF, // GPIO04 HLW8012 CF power
|
||
GPI8_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 HLW8012 SEL (0 = Voltage)
|
||
GPI8_LED1_INV, // GPIO13 Green Led - Link and Power status
|
||
GPI8_REL1, // GPIO14 Relay
|
||
0, 0, 0
|
||
},
|
||
{ // MI_DESK_LAMP - Mi LED Desk Lamp - https://www.mi.com/global/smartlamp/
|
||
0, 0,
|
||
GPI8_KEY1, // GPIO02 Button
|
||
0,
|
||
GPI8_PWM1, // GPIO04 Cold White
|
||
GPI8_PWM2, // GPIO05 Warm White
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_ROT1A, // GPIO12 Rotary switch A pin
|
||
GPI8_ROT1B, // GPIO13 Rotary switch B pin
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SP10 - Tuya SP10 (BL0937 Energy Monitoring)
|
||
// https://www.aliexpress.com/item/Smart-Mini-WiFi-Plug-Outlet-Switch-Work-With-ForEcho-Alexa-Google-Home-Remote-EU-Smart-Socket/32963670423.html
|
||
0, // GPIO00
|
||
GPI8_PWM1, // GPIO01 Nightlight
|
||
0, // GPIO02
|
||
GPI8_KEY1, // GPIO03 Button
|
||
GPI8_HJL_CF, // GPIO04 BL0937 CF power
|
||
GPI8_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage)
|
||
GPI8_LED1, // GPIO13 Blue LED - Link status
|
||
GPI8_REL1, // GPIO14 Relay and red LED
|
||
0, 0, 0
|
||
},
|
||
{ // WAGA - WAGA life CHCZ02MB (HJL-01 Energy Monitoring)
|
||
// https://www.ebay.com/itm/332595697006
|
||
GPI8_LED1_INV, // GPIO00 Red LED
|
||
0, // GPIO01 Serial RXD
|
||
0, // GPIO02
|
||
GPI8_NRG_SEL_INV, // GPIO03 HJL-01 Sel output (1 = Voltage)
|
||
0, // GPIO04
|
||
GPI8_HJL_CF, // GPIO05 HJL-01 CF power
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Relay
|
||
GPI8_KEY1, // GPIO13 Button
|
||
GPI8_NRG_CF1, // GPIO14 HJL-01 CF1 voltage / current
|
||
GPI8_LEDLNK_INV, // GPIO15 Blue LED - Link status
|
||
0, 0
|
||
},
|
||
{ // SYF05 - Sunyesmart SYF05 (a.k.a. Fcmila) = TYWE3S + SM16726
|
||
// Also works with Merkury 904 RGBW Bulbs with 13 set to GPI8_SM16716_SEL
|
||
// https://www.flipkart.com/fc-mila-bxav-xs-ad-smart-bulb/p/itmf85zgs45fzr7n
|
||
// https://docs.tuya.com/en/hardware/WiFi-module/wifi-e3s-module.html
|
||
// http://www.datasheet-pdf.com/PDF/SM16716-Datasheet-Sunmoon-932771
|
||
GPI8_USER, // GPIO00 N.C.
|
||
0, // GPIO01 Serial RXD
|
||
GPI8_USER, // GPIO02 N.C.
|
||
0, // GPIO03 Serial TXD
|
||
GPI8_SM16716_CLK, // GPIO04 SM16716 Clock
|
||
GPI8_PWM1, // GPIO05 White
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12 Alt. White on some devices
|
||
GPI8_USER, // GPIO13 SM16716 Enable on some devices
|
||
GPI8_SM16716_DAT, // GPIO14 SM16716 Data
|
||
0, // GPIO15 wired to GND
|
||
GPI8_USER, // GPIO16 N.C.
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // EXS_DIMMER - EX-Store WiFi Dimmer v4, two channel (ESP8266 w/ separate MCU dimmer)
|
||
// https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A
|
||
// https://ex-store.de/2-Kanal-RS232-WiFi-WLan-Dimmer-Modul-V4-fuer-Unterputzmontage-230V-3A-ESP8266-V12-Stift-und-Buchsenleisten
|
||
0,
|
||
GPI8_TXD, // GPIO01 MCU serial control
|
||
GPI8_LEDLNK, // GPIO02 LED Link
|
||
GPI8_RXD, // GPIO03 MCU serial control
|
||
GPI8_USER, // GPIO04
|
||
GPI8_USER, // GPIO05
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12
|
||
GPI8_EXS_ENABLE, // GPIO13 EXS MCU Enable
|
||
GPI8_USER, // GPIO14
|
||
0, // GPIO15
|
||
0, 0
|
||
},
|
||
{ // PWM_DIMMER - Support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM
|
||
// dimmer switches. The brightness of the load for these dimmers is
|
||
// controlled by a PWM GPIO pin. There are typically power, up & down
|
||
// buttons and 4 LED's. Examples are:
|
||
// https://www.amazon.com/dp/B07FXYSVR1
|
||
// https://www.amazon.com/dp/B07V26Q3VD
|
||
// https://www.amazon.com/dp/B07K67D43J
|
||
// https://www.amazon.com/dp/B07TTGFWFM
|
||
GPI8_KEY3, // GPIO00 Up button
|
||
GPI8_KEY2, // GPIO01 Down button
|
||
0, // GPIO02
|
||
GPI8_LED4_INV, // GPIO03 Level 5 LED
|
||
GPI8_LEDLNK_INV, // GPIO04 LED Link
|
||
GPI8_LED3_INV, // GPIO05 Level 4 LED
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_LED2_INV, // GPIO12 Level 3 LED
|
||
GPI8_PWM1, // GPIO13 Dimmer PWM
|
||
GPI8_LED1_INV, // GPIO12 Level 2 LED
|
||
GPI8_KEY1_INV, // GPIO15 Power button
|
||
GPI8_REL1_INV, // GPIO16 Power relay/Level 1 LED
|
||
0
|
||
},
|
||
{ // SONOFF_ZB_BRIDGE - Sonoff Zigbee Bridge (ESP8266)
|
||
GPI8_LED1_INV, // GPIO00 Green Led (0 = On, 1 = Off) - Traffic between ESP and EFR
|
||
GPI8_ZIGBEE_TX, // GPIO01 Zigbee Serial control
|
||
0, // GPIO02
|
||
GPI8_ZIGBEE_RX, // GPIO03 Zigbee Serial control
|
||
GPI8_ZIGBEE_RST, // GPIO04 Zigbee Reset
|
||
0, // GPIO05 EFR32 Bootloader mode (drive Low for Gecko Bootloader, inactive or high for Zigbee EmberZNet)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
// GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
// GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_I2C_SDA, // GPIO12 I2C SDA - connected to 512KB EEPROM
|
||
GPI8_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status
|
||
GPI8_I2C_SCL, // GPIO14 I2C SCL - connected to 512KB EEPROM
|
||
0, // GPIO15 connected to IO15 pad, also used for logging
|
||
GPI8_KEY1, // GPIO16 Button
|
||
0
|
||
}
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
* Templates with 14 usable pins (ESP8285)
|
||
\*********************************************************************************************/
|
||
|
||
const mytmplt8285 kModules8285[TMP_MAXMODULE_8266 - TMP_WEMOS] PROGMEM = {
|
||
{ // WEMOS - Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266)
|
||
GPI8_USER, // GPIO00 D3 Wemos Button Shield
|
||
GPI8_USER, // GPIO01 TX Serial RXD
|
||
GPI8_USER, // GPIO02 D4 Wemos DHT Shield
|
||
GPI8_USER, // GPIO03 RX Serial TXD and Optional sensor
|
||
GPI8_USER, // GPIO04 D2 Wemos I2C SDA
|
||
GPI8_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_USER, // GPIO09 (SD_DATA2 Flash QIO or ESP8285)
|
||
GPI8_USER, // GPIO10 (SD_DATA3 Flash QIO or ESP8285)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_USER, // GPIO12 D6
|
||
GPI8_USER, // GPIO13 D7
|
||
GPI8_USER, // GPIO14 D5
|
||
GPI8_USER, // GPIO15 D8
|
||
GPI8_USER, // GPIO16 D0 Wemos Wake
|
||
GPI8_USER // ADC0 A0 Analog input
|
||
},
|
||
{ // SONOFF_4CH - Sonoff 4CH (ESP8285)
|
||
GPI8_KEY1, // GPIO00 Button 1
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Optional sensor
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
|
||
GPI8_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_KEY2, // GPIO09 Button 2
|
||
GPI8_KEY3, // GPIO10 Button 3
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) - Link and Power status
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
|
||
GPI8_KEY4, // GPIO14 Button 4
|
||
GPI8_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
|
||
0, 0
|
||
},
|
||
{ // SONOFF_T12 - Sonoff T1 2CH (ESP8285)
|
||
GPI8_KEY1, // GPIO00 Button 1
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
0,
|
||
GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_KEY2, // GPIO09 Button 2
|
||
0, // GPIO10
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SONOFF_T13 - Sonoff T1 3CH (ESP8285)
|
||
GPI8_KEY1, // GPIO00 Button 1
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
GPI8_USER, // GPIO02 Optional Sensor (J3 Pin 5)
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
GPI8_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On)
|
||
GPI8_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_KEY2, // GPIO09 Button 2
|
||
GPI8_KEY3, // GPIO10 Button 3
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SONOFF_DUAL_R2 - Sonoff Dual R2 (ESP8285)
|
||
GPI8_USER, // GPIO00 Button 0 on header (0 = On, 1 = Off)
|
||
GPI8_USER, // GPIO01 Serial RXD and Optional sensor
|
||
0,
|
||
GPI8_USER, // GPIO03 Serial TXD and Optional sensor
|
||
0,
|
||
GPI8_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_USER, // GPIO09 Button 1 on header (0 = On, 1 = Off)
|
||
GPI8_KEY1, // GPIO10 Button on casing
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On)
|
||
GPI8_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
|
||
0, 0, 0, 0
|
||
},
|
||
{ // SONOFF_IFAN03 - Sonoff iFan03 (ESP8285)
|
||
GPI8_KEY1, // GPIO00 WIFI_KEY0 Button 1
|
||
GPI8_TXD, // GPIO01 ESP_TXD Serial RXD connection to P0.5 of RF microcontroller
|
||
0, // GPIO02 ESP_LOG
|
||
GPI8_RXD, // GPIO03 ESP_RXD Serial TXD connection to P0.4 of RF microcontroller
|
||
0, // GPIO04 DEBUG_RX
|
||
0, // GPIO05 DEBUG_TX
|
||
// GPIO06 (SD_CLK Flash)
|
||
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
|
||
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
|
||
GPI8_REL1_INV, // GPIO09 WIFI_O0 Relay 1 (0 = Off, 1 = On) controlling the light
|
||
GPI8_BUZZER_INV, // GPIO10 WIFI_O4 Buzzer (0 = Off, 1 = On)
|
||
// GPIO11 (SD_CMD Flash)
|
||
GPI8_REL3, // GPIO12 WIFI_O2 Relay 3 (0 = Off, 1 = On) controlling the fan
|
||
GPI8_LED1_INV, // GPIO13 WIFI_CHK Blue Led on PCA (0 = On, 1 = Off) - Link and Power status
|
||
GPI8_REL2, // GPIO14 WIFI_O1 Relay 2 (0 = Off, 1 = On) controlling the fan
|
||
GPI8_REL4, // GPIO15 WIFI_O3 Relay 4 (0 = Off, 1 = On) controlling the fan
|
||
0, 0
|
||
}
|
||
};
|
||
|
||
#endif // ESP8266
|
||
|
||
#ifdef ESP32
|
||
#if CONFIG_IDF_TARGET_ESP32C2
|
||
/********************************************************************************************\
|
||
* ESP32-C2 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32C2 {
|
||
WEMOS, // not really correct, a placeholder for now
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32C2|"
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32C2 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // Generic ESP32C2 device
|
||
AGPIO(GPIO_USER), // 0 IO GPIO0, ADC1_CH0, RTC
|
||
AGPIO(GPIO_USER), // 1 IO GPIO1, ADC1_CH1, RTC
|
||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC1_CH2, RTC
|
||
AGPIO(GPIO_USER), // 3 IO GPIO3, ADC1_CH3, RTC
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC1_CH4, RTC
|
||
AGPIO(GPIO_USER), // 5 IO GPIO5, RTC
|
||
AGPIO(GPIO_USER), // 6 IO GPIO6,
|
||
AGPIO(GPIO_USER), // 7 IO GPIO7,
|
||
AGPIO(GPIO_USER), // 8 IO GPIO8, Strapping
|
||
AGPIO(GPIO_USER), // 9 IO GPIO9, Strapping
|
||
AGPIO(GPIO_USER), // 10 IO GPIO10
|
||
0, // 11 IO GPIO11, output power supply for flash
|
||
0, // 12 IO GPIO12, SPIHD - Free if flash DIO/DOUT
|
||
0, // 13 IO GPIO13, SPIWP - Free if flash DIO/DOUT
|
||
0, // 14 IO GPIO14, SPICS0
|
||
0, // 15 IO GPIO15, SPICLK
|
||
0, // 16 IO GPIO16, SPID
|
||
0, // 17 IO GPIO17, SPIQ
|
||
AGPIO(GPIO_USER), // 18 IO GPIO18,
|
||
AGPIO(GPIO_USER), // 19 IO RXD0 GPIO19, U0RXD
|
||
AGPIO(GPIO_USER), // 20 IO TXD0 GPIO20, U0TXD
|
||
0 // Flag
|
||
},
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
\*********************************************************************************************/
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32C3
|
||
/********************************************************************************************\
|
||
* ESP32-C3 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32C3 {
|
||
WEMOS,
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32C3|"
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32C3 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // Generic ESP32C3 device
|
||
AGPIO(GPIO_USER), // 0 IO GPIO0, ADC1_CH0, XTAL_32K_P
|
||
AGPIO(GPIO_USER), // 1 IO GPIO1, ADC1_CH1, XTAL_32K_N
|
||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC1_CH2, FSPIQ
|
||
AGPIO(GPIO_USER), // 3 IO GPIO3, ADC1_CH3
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC1_CH4, FSPIHD, MTMS
|
||
AGPIO(GPIO_USER), // 5 IO GPIO5, ADC2_CH0, FSPIWP, MTDI
|
||
AGPIO(GPIO_USER), // 6 IO GPIO6, FSPICLK, MTCK
|
||
AGPIO(GPIO_USER), // 7 IO GPIO7, FSPID, MTDO
|
||
AGPIO(GPIO_USER), // 8 IO GPIO8
|
||
AGPIO(GPIO_USER), // 9 IO GPIO9
|
||
AGPIO(GPIO_USER), // 10 IO GPIO10
|
||
0, // 11 IO GPIO11, output power supply for flash
|
||
0, // 12 IO GPIO12, SPIHD - Free if flash DIO/DOUT
|
||
0, // 13 IO GPIO13, SPIWP - Free if flash DIO/DOUT
|
||
0, // 14 IO GPIO14, SPICS0
|
||
0, // 15 IO GPIO15, SPICLK
|
||
0, // 16 IO GPIO16, SPID
|
||
0, // 17 IO GPIO17, SPIQ
|
||
AGPIO(GPIO_USER), // 18 IO GPIO18, USB_D
|
||
AGPIO(GPIO_USER), // 19 IO GPIO19, USB_D+
|
||
AGPIO(GPIO_USER), // 20 IO RXD0 GPIO20, U0RXD
|
||
AGPIO(GPIO_USER), // 21 IO TXD0 GPIO21, U0TXD
|
||
0 // Flag
|
||
},
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
\*********************************************************************************************/
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32C6
|
||
/********************************************************************************************\
|
||
* ESP32-C6 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32C6 {
|
||
WEMOS, // not really correct, a placeholder for now
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32C6|"
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32C6 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // Generic ESP32C6 device
|
||
AGPIO(GPIO_USER), // 0 IO GPIO0, ADC1_CH0, LP_GPIO0
|
||
AGPIO(GPIO_USER), // 1 IO GPIO1, ADC1_CH1, LP_GPIO1
|
||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC1_CH2, LP_GPIO2
|
||
AGPIO(GPIO_USER), // 3 IO GPIO3, ADC1_CH3, LP_GPIO3
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC1_CH4, LP_GPIO4, Strapping
|
||
AGPIO(GPIO_USER), // 5 IO GPIO5, ADC1_CH5, LP_GPIO5, Strapping
|
||
AGPIO(GPIO_USER), // 6 IO GPIO6, ADC1_CH6, LP_GPIO6
|
||
AGPIO(GPIO_USER), // 7 IO GPIO7, LP_GPIO7
|
||
AGPIO(GPIO_USER), // 8 IO GPIO8, Strapping
|
||
AGPIO(GPIO_USER), // 9 IO GPIO9, Strapping
|
||
AGPIO(GPIO_USER), // 10 IO GPIO10 (QFN40 only)
|
||
AGPIO(GPIO_USER), // 11 IO GPIO11 (QFN40 only)
|
||
AGPIO(GPIO_USER), // 12 IO GPIO12, USB-JTAG
|
||
AGPIO(GPIO_USER), // 13 IO GPIO13, USB-JTAG
|
||
AGPIO(GPIO_USER), // 14 IO GPIO14 (QFN32 only)
|
||
AGPIO(GPIO_USER), // 15 IO GPIO15, Strapping
|
||
AGPIO(GPIO_USER), // 16 IO TXD0 GPIO16, U0TXD
|
||
AGPIO(GPIO_USER), // 17 IO RXD0 GPIO17, U0RXD
|
||
AGPIO(GPIO_USER), // 18 IO GPIO18, SDIO_CMD
|
||
AGPIO(GPIO_USER), // 19 IO GPIO19, SDIO_CLK
|
||
AGPIO(GPIO_USER), // 20 IO GPIO20, SDIO_DATA0
|
||
AGPIO(GPIO_USER), // 21 IO GPIO21, SDIO_DATA1
|
||
AGPIO(GPIO_USER), // 22 IO GPIO22, SDIO_DATA2
|
||
AGPIO(GPIO_USER), // 23 IO GPIO23, SDIO_DATA3
|
||
0, // 24 IO GPIO24, SPICS1, PSRAM
|
||
0, // 25 IO GPIO25, SPIQ
|
||
0, // 26 IO GPIO26, SPIWP - Free if flash DIO/DOUT
|
||
0, // 27 IO GPIO27, SPIVDD
|
||
0, // 28 IO GPIO28, SPIHD - Free if flash DIO/DOUT
|
||
0, // 29 IO GPIO29, SPICLK
|
||
0, // 30 IO GPIO30, SPID
|
||
0 // Flag
|
||
},
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
\*********************************************************************************************/
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32S2
|
||
/********************************************************************************************\
|
||
* ESP32-S2 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32S2 {
|
||
WEMOS,
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32S2|"
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32S2 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // Generic ESP32C3 device
|
||
AGPIO(GPIO_USER), // 0 IO GPIO0, RTC_GPIO0, Strapping
|
||
AGPIO(GPIO_USER), // 1 AO GPIO1, ADC1_CH0, RTC_GPIO1
|
||
AGPIO(GPIO_USER), // 2 AO GPIO2, ADC1_CH1, RTC_GPIO2
|
||
AGPIO(GPIO_USER), // 3 AO GPIO3, ADC1_CH2, RTC_GPIO3
|
||
AGPIO(GPIO_USER), // 4 AO GPIO4, ADC1_CH3, RTC_GPIO4
|
||
AGPIO(GPIO_USER), // 5 AO GPIO5, ADC1_CH4, RTC_GPIO5
|
||
AGPIO(GPIO_USER), // 6 AO GPIO6, ADC1_CH5, RTC_GPIO6
|
||
AGPIO(GPIO_USER), // 7 AO GPIO7, ADC1_CH6, RTC_GPIO7
|
||
AGPIO(GPIO_USER), // 8 AO GPIO8, ADC1_CH7, RTC_GPIO8
|
||
AGPIO(GPIO_USER), // 9 AO GPIO9, ADC1_CH8, RTC_GPIO9
|
||
AGPIO(GPIO_USER), // 10 AO GPIO10, ADC1_CH9, RTC_GPIO10
|
||
AGPIO(GPIO_USER), // 11 AO GPIO11, ADC2_CH0, RTC_GPIO11
|
||
AGPIO(GPIO_USER), // 12 AO GPIO12, ADC2_CH1, RTC_GPIO12
|
||
AGPIO(GPIO_USER), // 13 AO GPIO13, ADC2_CH2, RTC_GPIO13
|
||
AGPIO(GPIO_USER), // 14 AO GPIO14, ADC2_CH3, RTC_GPIO14
|
||
AGPIO(GPIO_USER), // 15 AO GPIO15, ADC2_CH4, RTC_GPIO15, XTAL_32K_P
|
||
AGPIO(GPIO_USER), // 16 AO GPIO16, ADC2_CH5, RTC_GPIO16, XTAL_32K_N
|
||
AGPIO(GPIO_USER), // 17 AO GPIO17, ADC2_CH6, RTC_GPIO17, DAC_1
|
||
AGPIO(GPIO_USER), // 18 AO GPIO18, ADC2_CH7, RTC_GPIO18, DAC_2
|
||
AGPIO(GPIO_USER), // 19 AO GPIO19, ADC2_CH8, RTC_GPIO19
|
||
AGPIO(GPIO_USER), // 20 AO GPIO20, ADC2_CH9, RTC_GPIO20
|
||
AGPIO(GPIO_USER), // 21 IO GPIO21, RTC_GPIO21
|
||
// 22 -- Unused
|
||
// 23 -- Unused
|
||
// 24 -- Unused
|
||
// 25 -- Unused
|
||
// 26 FL SPICS1, PSRAM
|
||
// 27 FL SPIHD
|
||
// 28 FL SPIWP
|
||
// 29 FL SPICS0
|
||
// 30 FL SPICLK
|
||
// 31 FL SPIQ
|
||
// 32 FL SPID
|
||
AGPIO(GPIO_USER), // 33 IO GPIO33
|
||
AGPIO(GPIO_USER), // 34 IO GPIO34
|
||
AGPIO(GPIO_USER), // 35 IO GPIO35
|
||
AGPIO(GPIO_USER), // 36 IO GPIO36
|
||
AGPIO(GPIO_USER), // 37 IO GPIO37
|
||
AGPIO(GPIO_USER), // 38 IO GPIO38
|
||
AGPIO(GPIO_USER), // 39 IO GPIO39, JTAG MTCK
|
||
AGPIO(GPIO_USER), // 40 IO GPIO40, JTAG MTDO
|
||
AGPIO(GPIO_USER), // 41 IO GPIO41, JTAG MTDI
|
||
AGPIO(GPIO_USER), // 42 IO GPIO42, JTAG MTMS
|
||
AGPIO(GPIO_USER), // 43 IO GPIO43, U0TXD
|
||
AGPIO(GPIO_USER), // 44 IO GPIO44, U0RXD
|
||
AGPIO(GPIO_USER), // 45 IO GPIO45, Strapping
|
||
AGPIO(GPIO_USER), // 46 I GPIO46, Input only, Strapping
|
||
0 // Flag
|
||
},
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
\*********************************************************************************************/
|
||
|
||
#elif CONFIG_IDF_TARGET_ESP32S3
|
||
/********************************************************************************************\
|
||
* ESP32-S3 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32S3 {
|
||
WEMOS,
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32S3|"
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32S2 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // Generic ESP32C3 device
|
||
AGPIO(GPIO_USER), // 0 IO RTC_GPIO0, GPIO0, Strapping
|
||
AGPIO(GPIO_USER), // 1 AO RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||
AGPIO(GPIO_USER), // 2 AO RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||
AGPIO(GPIO_USER), // 3 AO RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2, Strapping
|
||
AGPIO(GPIO_USER), // 4 AO RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||
AGPIO(GPIO_USER), // 5 AO RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||
AGPIO(GPIO_USER), // 6 AO RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||
AGPIO(GPIO_USER), // 7 AO RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||
AGPIO(GPIO_USER), // 8 AO RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||
AGPIO(GPIO_USER), // 9 AO RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, SUBSPIHD, FSPIHD
|
||
AGPIO(GPIO_USER), // 10 AO RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPIIO4, SUBSPICS0, FSPICS0
|
||
AGPIO(GPIO_USER), // 11 AO RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPIIO5, SUBSPID, FSPID
|
||
AGPIO(GPIO_USER), // 12 AO RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPIIO6, SUBSPICLK, FSPICLK
|
||
AGPIO(GPIO_USER), // 13 AO RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIIO7, SUBSPIQ, FSPIQ
|
||
AGPIO(GPIO_USER), // 14 AO RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIDQS, SUBSPIWP, FSPIWP
|
||
AGPIO(GPIO_USER), // 15 AO RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||
AGPIO(GPIO_USER), // 16 AO RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||
AGPIO(GPIO_USER), // 17 AO RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||
AGPIO(GPIO_USER), // 18 AO RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||
AGPIO(GPIO_USER), // 19 AO RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D
|
||
AGPIO(GPIO_USER), // 20 AO RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||
AGPIO(GPIO_USER), // 21 IO RTC_GPIO21, GPIO21
|
||
// 22 -- Unused
|
||
// 23 -- Unused
|
||
// 24 -- Unused
|
||
// 25 -- Unused
|
||
// 26 FL SPICS1, GPIO26
|
||
// 27 FL SPIHD, GPIO27
|
||
// 28 FL SPIWP, GPIO28
|
||
// 29 FL SPICS0, GPIO29
|
||
// 30 FL SPICLK, GPIO30
|
||
// 31 FL SPIQ, GPIO31
|
||
// 32 FL SPID, GPIO32
|
||
AGPIO(GPIO_NONE), // 33 IO SPIIO4, GPIO33, FSPIHD, SUBSPIHD
|
||
AGPIO(GPIO_NONE), // 34 IO SPIIO5, GPIO34, FSPICS0, SUBSPICS0
|
||
AGPIO(GPIO_NONE), // 35 IO SPIIO6, GPIO35, FSPID, SUBSPID
|
||
AGPIO(GPIO_NONE), // 36 IO SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||
AGPIO(GPIO_NONE), // 37 IO SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||
AGPIO(GPIO_USER), // 38 IO GPIO38, FSPIWP, SUBSPIWP
|
||
AGPIO(GPIO_USER), // 39 IO MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||
AGPIO(GPIO_USER), // 40 IO MTDO, GPIO40, CLK_OUT2
|
||
AGPIO(GPIO_USER), // 41 IO MTDI, GPIO41, CLK_OUT1
|
||
AGPIO(GPIO_USER), // 42 IO MTMS, GPIO42
|
||
AGPIO(GPIO_USER), // 43 IO U0TXD, GPIO43, CLK_OUT1
|
||
AGPIO(GPIO_USER), // 44 IO U0RXD, GPIO44, CLK_OUT2
|
||
AGPIO(GPIO_USER), // 45 IO GPIO45, Strapping
|
||
AGPIO(GPIO_USER), // 46 IO GPIO46, Strapping
|
||
AGPIO(GPIO_USER), // 47 IO SPICLK_P_DIFF, GPIO47, SUBSPICLK_P_DIFF
|
||
AGPIO(GPIO_USER), // 48 IO SPICLK_N_DIFF, GPIO48, SUBSPICLK_N_DIFF
|
||
0 // Flag
|
||
},
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
\*********************************************************************************************/
|
||
|
||
#else // not CONFIG_IDF_TARGET_ESP32C2/C3/C6 nor CONFIG_IDF_TARGET_ESP32S2 - ESP32
|
||
/********************************************************************************************\
|
||
* ESP32 Module templates
|
||
\********************************************************************************************/
|
||
|
||
#define USER_MODULE 255
|
||
|
||
// Supported hardware modules
|
||
enum SupportedModulesESP32 {
|
||
WEMOS,
|
||
ESP32_CAM_AITHINKER,
|
||
ODROID_GO,
|
||
ESP32_SOLO,
|
||
WT32_ETH01,
|
||
MAXMODULE };
|
||
|
||
// Default module settings
|
||
const uint8_t kModuleNiceList[] PROGMEM = {
|
||
WEMOS,
|
||
#ifdef USE_WEBCAM
|
||
ESP32_CAM_AITHINKER,
|
||
#endif // USE_WEBCAM
|
||
#ifdef USE_ODROID_GO
|
||
ODROID_GO,
|
||
#endif // USE_ODROID_GO
|
||
#ifdef USE_ESP32_SOLO
|
||
// ESP32_SOLO, // To be defined
|
||
#endif // USE_ESP32_SOLO
|
||
#ifdef USE_WT32_ETH01
|
||
WT32_ETH01,
|
||
#endif // USE_WT32_ETH01
|
||
};
|
||
|
||
// !!! Update this list in the same order as kModuleNiceList !!!
|
||
const char kModuleNames[] PROGMEM =
|
||
"ESP32-DevKit|"
|
||
#ifdef USE_WEBCAM
|
||
"ESP32-Cam|"
|
||
#endif // USE_WEBCAM
|
||
#ifdef USE_ODROID_GO
|
||
"Odroid Go|"
|
||
#endif // USE_ODROID_GO
|
||
#ifdef USE_ESP32_SOLO
|
||
// "ESP32-Solo|" // To be defined
|
||
#endif // USE_ESP32_SOLO
|
||
#ifdef USE_WT32_ETH01
|
||
"WT32-Eth01|"
|
||
#endif // USE_WT32_ETH01
|
||
;
|
||
|
||
// !!! Update this list in the same order as SupportedModulesESP32 !!!
|
||
const mytmplt kModules[] PROGMEM = {
|
||
{ // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
|
||
AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
||
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||
AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||
// 6 IO Remapped to 28
|
||
// 7 IO Remapped to 29
|
||
// 8 IO Remapped to 30
|
||
AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD
|
||
AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD
|
||
// 11 IO Remapped to 31
|
||
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
||
AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
||
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
|
||
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
|
||
AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7
|
||
AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||
0, // 20
|
||
AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN
|
||
AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||
AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE
|
||
0, // 24
|
||
AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||
AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||
AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
||
0, // 6 IO GPIO6, Flash CLK
|
||
0, // 7 IO GPIO7, Flash D0
|
||
0, // 8 IO GPIO8, Flash D1
|
||
0, // 11 IO GPIO11, Flash CMD
|
||
AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
|
||
AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
||
AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
|
||
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
|
||
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
|
||
0, // 37 NO PULLUP
|
||
0, // 38 NO PULLUP
|
||
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
|
||
0 // Flag
|
||
},
|
||
|
||
#ifdef USE_WEBCAM
|
||
{ // ESP32_CAM_AITHINKER - Any ESP32 device with webcam (ESP32)
|
||
AGPIO(GPIO_WEBCAM_XCLK), // 0 (I)O GPIO0, CAM_XCLK
|
||
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||
AGPIO(GPIO_SPI_MISO), // 2 IO GPIO2, VSPI_MISO
|
||
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
||
AGPIO(GPIO_PWM1), // 4 IO GPIO4, Flashlight
|
||
AGPIO(GPIO_WEBCAM_DATA), // 5 IO GPIO5, CAM_DATA1
|
||
// 6 IO Remapped to 28
|
||
// 7 IO Remapped to 29
|
||
// 8 IO Remapped to 30
|
||
AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD
|
||
AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD
|
||
// 11 IO Remapped to 31
|
||
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
||
AGPIO(GPIO_SDCARD_CS), // 13 IO GPIO13, VSPI_CS_TFLASH
|
||
AGPIO(GPIO_SPI_CLK), // 14 IO GPIO14, VSPI_CLK
|
||
AGPIO(GPIO_SPI_MOSI), // 15 (I)O GPIO15, VSPI_MOSI (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
||
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
|
||
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
|
||
AGPIO(GPIO_WEBCAM_DATA) +1, // 18 IO GPIO18, CAM_DATA2
|
||
AGPIO(GPIO_WEBCAM_DATA) +2, // 19 IO GPIO19, CAM_DATA3
|
||
0, // 20
|
||
AGPIO(GPIO_WEBCAM_DATA) +3, // 21 IO GPIO21, CAM_DATA4
|
||
AGPIO(GPIO_WEBCAM_PCLK), // 22 IO LED GPIO22, CAM_PCLK
|
||
AGPIO(GPIO_WEBCAM_HREF), // 23 IO GPIO23, CAM_HREF
|
||
0, // 24
|
||
AGPIO(GPIO_WEBCAM_VSYNC), // 25 IO GPIO25, CAM_VSYNC
|
||
AGPIO(GPIO_WEBCAM_SIOD), // 26 IO GPIO26, CAM_SIOD
|
||
AGPIO(GPIO_WEBCAM_SIOC), // 27 IO GPIO27, CAM_SIOC
|
||
0, // 6 IO GPIO6, Flash CLK
|
||
0, // 7 IO GPIO7, Flash D0
|
||
0, // 8 IO GPIO8, Flash D1
|
||
0, // 11 IO GPIO11, Flash CMD
|
||
AGPIO(GPIO_WEBCAM_PWDN), // 32 IO GPIO32, CAM_PWDN
|
||
AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
||
AGPIO(GPIO_WEBCAM_DATA) +6, // 34 I NO PULLUP GPIO34, CAM_DATA7
|
||
AGPIO(GPIO_WEBCAM_DATA) +7, // 35 I NO PULLUP GPIO35, CAM_DATA8
|
||
AGPIO(GPIO_WEBCAM_DATA) +4, // 36 I NO PULLUP GPIO36, CAM_DATA5
|
||
0, // 37 NO PULLUP
|
||
0, // 38 NO PULLUP
|
||
AGPIO(GPIO_WEBCAM_DATA) +5, // 39 I NO PULLUP GPIO39, CAM_DATA6
|
||
0 // Flag
|
||
},
|
||
#endif // USE_WEBCAM
|
||
|
||
#ifdef USE_ODROID_GO
|
||
{ // ODROID_GO - (ESP32)
|
||
AGPIO(GPIO_KEY1), // 0 (I)O GPIO0, BTN-VOLUME
|
||
AGPIO(GPIO_TXD), // 1 IO TXD0 GPIO1, TXD0
|
||
AGPIO(GPIO_LEDLNK), // 2 IO GPIO2, STATUS LED
|
||
AGPIO(GPIO_RXD), // 3 IO RXD0 GPIO3, RXD0
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||
AGPIO(GPIO_ILI9341_CS), // 5 IO GPIO5, VSPI_CS0_LCD
|
||
// 6 IO Remapped to 28
|
||
// 7 IO Remapped to 29
|
||
// 8 IO Remapped to 30
|
||
0, // 9 IO GPIO9, Flash D2, U1RXD
|
||
0, // 10 IO GPIO10, Flash D3, U1TXD
|
||
// 11 IO Remapped to 31
|
||
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
||
AGPIO(GPIO_KEY1) +1, // 13 IO GPIO13, BTN-MENU
|
||
AGPIO(GPIO_PWM1), // 14 IO GPIO14, LCD Backlight
|
||
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
||
AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
|
||
AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
|
||
AGPIO(GPIO_SPI_CLK), // 18 IO GPIO18, VSPI_CLK
|
||
AGPIO(GPIO_SPI_MISO), // 19 IO GPIO19, VSPI_MISO
|
||
0, // 20
|
||
AGPIO(GPIO_ILI9341_DC), // 21 IO GPIO21, SPI_DC_LCD
|
||
AGPIO(GPIO_SDCARD_CS), // 22 IO LED GPIO22, VSPI_CS1_TFLASH
|
||
AGPIO(GPIO_SPI_MOSI), // 23 IO GPIO23, VSPI_MOSI
|
||
0, // 24
|
||
0, // 25 IO GPIO25, DAC_1 (PAM8304A)
|
||
0, // 26 IO GPIO26, DAC_2 (PAM8304A)
|
||
AGPIO(GPIO_KEY1) +2, // 27 IO GPIO27, BTN-SELECT
|
||
0, // 6 IO GPIO6, Flash CLK
|
||
0, // 7 IO GPIO7, Flash D0
|
||
0, // 8 IO GPIO8, Flash D1
|
||
0, // 11 IO GPIO11, Flash CMD
|
||
AGPIO(GPIO_SWT1) +4, // 32 IO GPIO32, BTN-A
|
||
AGPIO(GPIO_SWT1) +5, // 33 IO GPIO33, BTN-B
|
||
AGPIO(GPIO_ADC_JOY), // 34 I NO PULLUP GPIO34, JOY-X (LEFT-RIGHT)
|
||
AGPIO(GPIO_ADC_JOY) +1, // 35 I NO PULLUP GPIO35, JOY-Y (UP-DOWN)
|
||
AGPIO(GPIO_ADC_RANGE) +2, // 36 I NO PULLUP GPIO36, SENSOR_VP (BATTERY CARGER)
|
||
0, // 37 NO PULLUP
|
||
0, // 38 NO PULLUP
|
||
AGPIO(GPIO_KEY1) +3, // 39 I NO PULLUP GPIO39, BTN-START
|
||
0 // Flag
|
||
},
|
||
#endif // USE_ODROID_GO
|
||
|
||
#ifdef USE_ESP32_SOLO
|
||
// { // ESP32 Solo (ESP32) - To be defined
|
||
// },
|
||
#endif // USE_ESP32_SOLO
|
||
|
||
#ifdef USE_WT32_ETH01
|
||
{ // WT32_ETH01 - (ESP32)
|
||
0, // 0 (I)O GPIO0, Ethernet EMAC_REF_CLK
|
||
AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||
AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||
AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
||
AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||
AGPIO(GPIO_USER), // 5 IO GPIO5, RXD Led green
|
||
// 6 IO Remapped to 28
|
||
// 7 IO Remapped to 29
|
||
// 8 IO Remapped to 30
|
||
0, // 9 IO GPIO9, Flash D2, U1RXD
|
||
0, // 10 IO GPIO10, Flash D3, U1TXD
|
||
// 11 IO Remapped to 31
|
||
AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
||
0, // 13 IO GPIO13, Ethernet EMAC_RX_ER
|
||
AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||
AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
||
AGPIO(GPIO_OUTPUT_HI), // 16 IO GPIO16, Ethernet OSC_ENA
|
||
AGPIO(GPIO_LEDLNK_INV), // 17 IO GPIO17, Network link led (green)
|
||
AGPIO(GPIO_ETH_PHY_MDIO), // 18 IO GPIO18, Ethernet MDIO
|
||
0, // 19 IO GPIO19, Ethernet TXD0
|
||
0, // 20
|
||
0, // 21 IO GPIO21, Ethernet EMAC_TX_EN
|
||
0, // 22 IO LED GPIO22, Ethernet EMAC_TXD1
|
||
AGPIO(GPIO_ETH_PHY_MDC), // 23 IO GPIO23, Ethernet MDC
|
||
0, // 24
|
||
0, // 25 IO GPIO25, Ethernet EMAC_RXD0
|
||
0, // 26 IO GPIO26, Ethernet EMAC_RXD1
|
||
0, // 27 IO GPIO27, Ethernet EMAC_RX_DV
|
||
0, // 6 IO GPIO6, Flash CLK
|
||
0, // 7 IO GPIO7, Flash D0
|
||
0, // 8 IO GPIO8, Flash D1
|
||
0, // 11 IO GPIO11, Flash CMD
|
||
AGPIO(GPIO_USER), // 32 IO GPIO32, CFG
|
||
AGPIO(GPIO_USER), // 33 IO GPIO33, 485_EN
|
||
0, // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
|
||
AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
|
||
AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
|
||
0, // 37 NO PULLUP
|
||
0, // 38 NO PULLUP
|
||
AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
|
||
0 // Flag
|
||
},
|
||
#endif // USE_WT32_ETH01
|
||
|
||
};
|
||
|
||
/*********************************************************************************************\
|
||
Known templates
|
||
|
||
{"NAME":"AITHINKER CAM","GPIO":[4992,1,1,1,1,5088,1,1,1,1,1,1,1,1,5089,5090,0,5091,5184,5152,0,5120,5024,5056,0,0,0,0,4928,1,5094,5095,5092,0,0,5093],"FLAG":0,"BASE":1}
|
||
{"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
||
{"NAME":"wESP32","GPIO":[1,1,1,1,1,1,0,0,0,1,1,1,5568,5600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
||
{"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
||
|
||
\*********************************************************************************************/
|
||
|
||
#endif // ESP32/S2/C3 selection
|
||
#endif // ESP32
|
||
|
||
#endif // _TASMOTA_TEMPLATE_H_
|