.. |
xsns_01_counter.ino
|
Add command ``SetOption159 1`` to enable counting on both rising and falling edge (#20712)
|
2024-02-14 11:22:41 +01:00 |
xsns_02_analog.ino
|
Remove non IDF5 code
|
2024-05-15 16:45:42 +02:00 |
xsns_04_snfsc.ino
|
Fix Sonoff SC regression from yesterday
|
2023-03-12 11:11:57 +01:00 |
xsns_05_ds18x20.ino
|
Final fix ;-) (#19763)
|
2023-10-18 16:19:13 +02:00 |
xsns_05_esp32_ds18x20.ino
|
Add ESP32 support for DS18x20 on Shelly Plus Add-On (#20580)
|
2024-01-26 12:26:47 +01:00 |
xsns_06_dht_v5.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_06_dht_v6.ino
|
Change Dht driver from v6 to v7
|
2023-02-15 15:21:57 +01:00 |
xsns_06_dht_v7.ino
|
Change Dht driver from v6 to v7
|
2023-02-15 15:21:57 +01:00 |
xsns_06_esp32_dht.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_07_sht1x.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_08_htu21.ino
|
Fix HTU21 bus number
|
2023-10-19 17:44:59 +02:00 |
xsns_09_bmp.ino
|
Add heatindex to BMP driver (#4771)
|
2024-02-19 14:17:40 +01:00 |
xsns_10_bh1750.ino
|
Add I2C bus2 support to BH1750
|
2023-10-19 18:01:12 +02:00 |
xsns_11_veml6070.ino
|
Update credits
|
2022-12-10 16:55:04 +01:00 |
xsns_12_ads1115.ino
|
Update changelogs
|
2023-10-21 14:48:12 +02:00 |
xsns_13_ina219.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_14_sht3x.ino
|
Add SHT3x I2C bus2 support
|
2023-10-20 14:52:21 +02:00 |
xsns_15_mhz19.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_16_tsl2561.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_17_senseair.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_18_pms5003.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_19_mgs.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_20_novasds.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_21_sgp30.ino
|
Consolidate messages
|
2023-03-22 13:25:55 +01:00 |
xsns_22_sr04.ino
|
Relax system load when not using SR04
|
2024-04-09 10:20:03 +02:00 |
xsns_23_me007.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_24_si1145.ino
|
Add I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor
|
2023-10-21 15:31:54 +02:00 |
xsns_25_spl06-007_sensor.ino
|
Add support for SPL06_007 pressure and temperature sensor (#21185)
|
2024-04-18 11:47:16 +02:00 |
xsns_26_lm75ad.ino
|
Add I2C bus2 support to LM75AD temperature sensor
|
2023-10-21 15:42:32 +02:00 |
xsns_27_apds9960.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_28_qmp6988.ino
|
Fix QMP6988
|
2024-06-12 10:50:29 +02:00 |
xsns_29_mcp230xx.ino
|
Fix default compile
|
2024-05-09 14:34:25 +02:00 |
xsns_30_mpr121.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_31_ccs811.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_31_ccs811_v2.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_32_mpu6050.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_33_qmc5883l.ino
|
beautified code xsns 33 qmc5883l (#21312)
|
2024-05-07 10:06:57 +02:00 |
xsns_34_hx711.ino
|
Added define to adjust calibration precision. (#18613)
|
2023-05-10 09:38:27 +02:00 |
xsns_35_tx20.ino
|
Phase 1 support C2/C6
|
2023-08-21 17:10:06 +02:00 |
xsns_36_mgc3130.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_37_rfsensor.ino
|
Refactor RFSensor
|
2023-03-15 12:05:40 +01:00 |
xsns_38_az7798.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_39_max31855.ino
|
MAX31855/MAX6675 sensors driver support up to 6 (#19704)
|
2023-10-09 10:44:24 +02:00 |
xsns_40_pn532.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_41_max44009.ino
|
Update credits
|
2022-12-10 16:55:04 +01:00 |
xsns_42_scd30.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_43_hre.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_44_sps30.ino
|
fix: detection of SPS30 serial number (#17809)
|
2023-01-29 13:48:33 +01:00 |
xsns_45_vl53l0x.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_46_MLX90614.ino
|
Fix MLX90614 naming (#20592)
|
2024-01-25 14:29:12 +01:00 |
xsns_47_max31865.ino
|
Update xsns_47_max31865.ino (#17661)
|
2023-01-11 11:50:16 +01:00 |
xsns_48_chirp.ino
|
Remove non IDF5 code
|
2024-05-15 16:45:42 +02:00 |
xsns_50_paj7620.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_51_rdm6300.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_52_esp32_ibeacon_ble.ino
|
Phase 1 support C2/C6
|
2023-08-21 17:10:06 +02:00 |
xsns_52_ibeacon.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_53_sml.ino
|
replace vars in descriptor + line (#21622)
|
2024-06-14 10:14:44 +02:00 |
xsns_54_ina226.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_55_hih_series.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_56_hpma.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_57_tsl2591.ino
|
Sensor57 TSL2591 Light Sensor Commands (#20039)
|
2023-12-02 12:35:56 +01:00 |
xsns_58_dht12.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_59_ds1624.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_60_GPS.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_61_MI_NRF24.ino
|
Fix GUI auto-decimal (#21445)
|
2024-05-21 14:27:02 +02:00 |
xsns_62_MI_HM10.ino
|
Fix GUI auto-decimal (#21445)
|
2024-05-21 14:27:02 +02:00 |
xsns_62_esp32_mi.ino
|
refactoring, bugfixes, generic device scanning (#21603)
|
2024-06-10 10:50:50 +02:00 |
xsns_62_esp32_mi_ble.ino
|
Webcamshutdown - use FUNC_ABOUT_TO_RESTART (#21462)
|
2024-05-25 19:51:46 +02:00 |
xsns_63_aht1x.ino
|
Add Support for AHT30 Temperature and Humidity Sensor (#19922)
|
2024-04-28 21:34:36 +02:00 |
xsns_64_hrxl.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_65_hdc1080.ino
|
fix: properly detect device is offline after maximum misses reached (#19298)
|
2023-08-12 11:32:29 +02:00 |
xsns_66_iAQ.ino
|
Add I2C bus2 support to HTU temperature sensor
|
2023-10-19 17:37:19 +02:00 |
xsns_67_as3935.ino
|
Phase 1 support C2/C6
|
2023-08-21 17:10:06 +02:00 |
xsns_68_windmeter.ino
|
Windmeter: add measure interval setting (#19542)
|
2023-10-06 10:53:38 +02:00 |
xsns_69_opentherm.ino
|
Fix PID-Control parameter destruction
|
2023-01-06 14:58:19 +01:00 |
xsns_69_opentherm_protocol.ino
|
Respect m_flags.skip in OpenTherm polling.
|
2022-09-21 00:58:56 +02:00 |
xsns_70_veml6075.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_71_veml7700.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_72_mcp9808.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_73_hp303b.ino
|
Update credits
|
2022-12-10 16:55:04 +01:00 |
xsns_74_lmt01.ino
|
Phase 1 support C2/C6
|
2023-08-21 17:10:06 +02:00 |
xsns_75_prometheus.ino
|
Prep ESP32 energy
|
2023-01-24 16:54:03 +01:00 |
xsns_76_dyp.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_77_vl53l1x.ino
|
Update credits
|
2022-12-10 16:55:04 +01:00 |
xsns_78_ezo.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoco2.ino
|
Add CO2 autolight
|
2022-09-30 14:31:30 +02:00 |
xsns_78_ezodo.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoec.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoflo.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezohum.ino
|
Fix compilation when webserver disabled
|
2023-10-06 12:17:37 +02:00 |
xsns_78_ezoo2.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoorp.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoph.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezopmp.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezoprs.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezorgb.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_ezortd.ino
|
Bump version to v11.1.0.4
|
2022-06-02 14:17:39 +02:00 |
xsns_78_xezo.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_79_as608.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_80_mfrc522.ino
|
Four files which used #ifdef EPS8266 instead of #ifdef ESP8266 - which e.g. broke the MFRC522 functionality between 12.5 and 13.x. (#19209)
|
2023-07-29 16:50:27 +02:00 |
xsns_81_seesaw_soil.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_82_wiegand.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_83_neopool.ino
|
Change NeoPool using temperature as only frequently changing value for NPTeleperiod (#21628)
|
2024-06-14 10:14:13 +02:00 |
xsns_84_tof10120.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_85_mpu6886.ino
|
Fix compilation when webserver disabled
|
2023-10-06 12:17:37 +02:00 |
xsns_86_tfminiplus.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_87_can_sniffer.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_87_mcp2515.ino
|
Fix xsns_87_mcp2515 (#21331)
|
2024-05-05 16:02:44 +02:00 |
xsns_88_am2320.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_89_t67xx.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_90_hrg15.ino
|
Fix unsupported %.2f (#21508)
|
2024-05-27 15:37:15 +02:00 |
xsns_91_vindriktning.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_92_scd40.ino
|
Add internal support for max log level
|
2023-05-19 15:20:21 +02:00 |
xsns_93_hm330x.ino
|
Consolidate sensor parameters
|
2023-03-20 17:11:05 +01:00 |
xsns_94_hdc2010.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_95_cm110x.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_96_flowratemeter.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_97_hyt.ino
|
Add HYT I2c bus2 support
|
2023-10-20 13:35:24 +02:00 |
xsns_98_sgp40.ino
|
Fix SGP4 domoticz air quality (#18880)
|
2024-04-11 15:35:00 +02:00 |
xsns_99_luxv30b.ino
|
Refactor uint8_t to uint32_t
|
2022-11-11 10:44:56 +01:00 |
xsns_100_ina3221.ino
|
add options for INA3221 driver (#21310)
|
2024-05-06 11:42:31 +02:00 |
xsns_101_hmc5883l.ino
|
Fix QMC5883 and HLC5883 drivers breaking sensor command (#20585)
|
2024-01-25 08:43:56 +01:00 |
xsns_102_ld2410.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_103_sen5x.ino
|
Added passive mode for Sen5x sensor (required for Ike@ Vindstyrka) (#19388)
|
2023-08-26 16:14:30 +02:00 |
xsns_104_pmsa003i.ino
|
Consolidate sensor parameters
|
2023-03-20 17:11:05 +01:00 |
xsns_105_lox_o2.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_106_gdk101.ino
|
Refactor GDK101 driver
|
2023-04-23 18:09:33 +02:00 |
xsns_107_gm861.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_108_tc74.ino
|
Add support for TC74
|
2023-05-01 16:26:07 +02:00 |
xsns_109_sgp4x.ino
|
Fix SGP4 domoticz air quality (#18880)
|
2024-04-11 15:35:00 +02:00 |
xsns_110_max17043.ino
|
Update xsns_110_max17043.ino (#19709)
|
2023-10-09 16:52:56 +02:00 |
xsns_111_ens16x.ino
|
Add ENS16x (air quality) and ENS210 (temp & RH) sensors (#19479)
|
2023-09-24 18:30:15 +02:00 |
xsns_112_ens210.ino
|
Add ENS16x (air quality) and ENS210 (temp & RH) sensors (#19479)
|
2023-09-24 18:30:15 +02:00 |
xsns_113_hc8.ino
|
Fix Berry claiming UART0 if needed (#20324)
|
2023-12-28 17:25:01 +01:00 |
xsns_114_amsx915.ino
|
add support for ams5915 and ams6915 temerature and pressure sensors (#20814)
|
2024-02-26 23:04:25 +01:00 |
xsns_127_esp32_sensors.ino
|
Remove non IDF5 code
|
2024-05-15 16:45:42 +02:00 |