Tasmota/lib/lib_display/UDisplay/uDisplay.h

251 lines
8.0 KiB
C++
Executable File

#ifndef _UDISP_
#define _UDISP_
#include <Adafruit_GFX.h>
#include <renderer.h>
#include <Wire.h>
#include <SPI.h>
#ifdef ESP32
#include "driver/spi_master.h"
#endif
#define _UDSP_I2C 1
#define _UDSP_SPI 2
#define UDISP1_WHITE 1
#define UDISP1_BLACK 0
#define DISPLAY_INIT_MODE 0
#define DISPLAY_INIT_PARTIAL 1
#define DISPLAY_INIT_FULL 2
enum uColorType { uCOLOR_BW, uCOLOR_COLOR };
// Color definitions
#define UDISP_BLACK 0x0000 /* 0, 0, 0 */
#define UDISP_NAVY 0x000F /* 0, 0, 128 */
#define UDISP_DARKGREEN 0x03E0 /* 0, 128, 0 */
#define UDISP_DARKCYAN 0x03EF /* 0, 128, 128 */
#define UDISP_MAROON 0x7800 /* 128, 0, 0 */
#define UDISP_PURPLE 0x780F /* 128, 0, 128 */
#define UDISP_OLIVE 0x7BE0 /* 128, 128, 0 */
#define UDISP_LIGHTGREY 0xC618 /* 192, 192, 192 */
#define UDISP_DARKGREY 0x7BEF /* 128, 128, 128 */
#define UDISP_BLUE 0x001F /* 0, 0, 255 */
#define UDISP_GREEN 0x07E0 /* 0, 255, 0 */
#define UDISP_CYAN 0x07FF /* 0, 255, 255 */
#define UDISP_RED 0xF800 /* 255, 0, 0 */
#define UDISP_MAGENTA 0xF81F /* 255, 0, 255 */
#define UDISP_YELLOW 0xFFE0 /* 255, 255, 0 */
#define UDISP_WHITE 0xFFFF /* 255, 255, 255 */
#define UDISP_ORANGE 0xFD20 /* 255, 165, 0 */
#define UDISP_GREENYELLOW 0xAFE5 /* 173, 255, 47 */
#define UDISP_PINK 0xF81F
#ifdef ESP8266
#define PIN_OUT_SET 0x60000304
#define PIN_OUT_CLEAR 0x60000308
#define GPIO_SET(A) WRITE_PERI_REG( PIN_OUT_SET, 1 << A)
#define GPIO_CLR(A) WRITE_PERI_REG( PIN_OUT_CLEAR, 1 << A)
#define GPIO_CLR_SLOW(A) digitalWrite(A, LOW)
#define GPIO_SET_SLOW(A) digitalWrite(A, HIGH)
#else
#undef GPIO_SET
#undef GPIO_CLR
#undef GPIO_SET_SLOW
#undef GPIO_CLR_SLOW
#if CONFIG_IDF_TARGET_ESP32C3
#define GPIO_CLR(A) GPIO.out_w1tc.val = (1 << A)
#define GPIO_SET(A) GPIO.out_w1ts.val = (1 << A)
#else // plain ESP32
#define GPIO_CLR(A) GPIO.out_w1tc = (1 << A)
#define GPIO_SET(A) GPIO.out_w1ts = (1 << A)
#endif
#define GPIO_CLR_SLOW(A) digitalWrite(A, LOW)
#define GPIO_SET_SLOW(A) digitalWrite(A, HIGH)
#endif
#define SPI_BEGIN_TRANSACTION if (spi_nr <= 2) beginTransaction(spiSettings);
#define SPI_END_TRANSACTION if (spi_nr <= 2) endTransaction();
#define SPI_CS_LOW if (spi_cs >= 0) GPIO_CLR_SLOW(spi_cs);
#define SPI_CS_HIGH if (spi_cs >= 0) GPIO_SET_SLOW(spi_cs);
#define SPI_DC_LOW if (spi_dc >= 0) GPIO_CLR_SLOW(spi_dc);
#define SPI_DC_HIGH if (spi_dc >= 0) GPIO_SET_SLOW(spi_dc);
#define ESP32_PWM_CHANNEL 1
#define LUTMAXSIZE 64
class uDisplay : public Renderer {
public:
uDisplay(char *);
~uDisplay(void);
Renderer *Init(void);
void DisplayInit(int8_t p,int8_t size,int8_t rot,int8_t font);
void Updateframe();
void DisplayOnff(int8_t on);
void Splash(void);
char *devname(void);
uint16_t fgcol(void);
uint16_t bgcol(void);
int8_t color_type(void);
// void dim(uint8_t dim); // original version with 4 bits resolution 0..15
virtual void dim8(uint8_t dim, uint8_t dim_gamma); // dimmer with 8 bits resolution, 0..255. Gamma correction must be done by caller
uint16_t GetColorFromIndex(uint8_t index);
void setRotation(uint8_t m);
void fillScreen(uint16_t color);
void fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color);
void pushColors(uint16_t *data, uint16_t len, boolean first);
void TS_RotConvert(int16_t *x, int16_t *y);
void invertDisplay(boolean i);
void SetPwrCB(pwr_cb cb) { pwr_cbp = cb; };
void SetDimCB(dim_cb cb) { dim_cbp = cb; };
private:
void beginTransaction(SPISettings s);
void endTransaction(void);
void setAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
void drawPixel(int16_t x, int16_t y, uint16_t color);
void drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color);
void drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color);
uint32_t str2c(char **sp, char *vp, uint32_t len);
void i2c_command(uint8_t val);
void spi_command_one(uint8_t val);
void spi_command(uint8_t val);
void spi_data8(uint8_t val);
void spi_data16(uint16_t val);
void spi_data32(uint32_t val);
void write8(uint8_t val);
void write8_slow(uint8_t val);
void write9(uint8_t val, uint8_t dc);
void write9_slow(uint8_t val, uint8_t dc);
void hw_write9(uint8_t val, uint8_t dc);
void write16(uint16_t val);
void write32(uint32_t val);
void spi_data9(uint8_t d, uint8_t dc);
void WriteColor(uint16_t color);
void SetLut(const unsigned char* lut);
void SetLuts(void);
void DisplayFrame_29(void);
void Updateframe_EPD();
//void DisplayFrame_42(const unsigned char* frame_buffer);
void SetFrameMemory(const unsigned char* image_buffer);
void SetFrameMemory(const unsigned char* image_buffer, uint16_t x, uint16_t y, uint16_t image_width, uint16_t image_height);
void SetMemoryArea(int x_start, int y_start, int x_end, int y_end);
void SetMemoryPointer(int x, int y);
void DrawAbsolutePixel(int x, int y, int16_t color);
void drawPixel_EPD(int16_t x, int16_t y, uint16_t color);
void fillRect_EPD(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color);
void drawFastVLine_EPD(int16_t x, int16_t y, int16_t h, uint16_t color);
void drawFastHLine_EPD(int16_t x, int16_t y, int16_t w, uint16_t color);
void Init_EPD(int8_t p);
void spi_command_EPD(uint8_t val);
void spi_data8_EPD(uint8_t val);
//void SetPartialWindow_42(uint8_t* frame_buffer, int16_t x, int16_t y, int16_t w, int16_t l, int16_t dtm);
void ClearFrameMemory(unsigned char color);
void ClearFrame_42(void);
void DisplayFrame_42(void);
uint8_t strlen_ln(char *str);
int32_t next_val(char **sp);
uint32_t next_hex(char **sp);
void setAddrWindow_int(uint16_t x, uint16_t y, uint16_t w, uint16_t h);
char dname[16];
int8_t bpp;
uint8_t col_type;
uint8_t interface;
uint8_t i2caddr;
int8_t i2c_scl;
TwoWire *wire;
int8_t wire_n;
int8_t i2c_sda;
uint8_t i2c_col_start;
uint8_t i2c_col_end;
uint8_t i2c_page_start;
uint8_t i2c_page_end;
int8_t reset;
uint8_t dsp_cmds[128];
uint8_t dsp_ncmds;
uint8_t dsp_on;
uint8_t dsp_off;
uint8_t allcmd_mode;
int8_t splash_font;
uint8_t splash_size;
uint16_t splash_xp;
uint16_t splash_yp;
uint16_t fg_col;
uint16_t bg_col;
uint16_t gxs;
uint16_t gys;
int8_t spi_cs;
int8_t spi_clk;
int8_t spi_mosi;
int8_t spi_dc;
int8_t bpanel; // backbanel GPIO, -1 if none
int8_t spi_miso;
uint8_t dimmer8; // 8 bits resolution, 0..255
uint8_t dimmer8_gamma; // 8 bits resolution, 0..255, gamma corrected
SPIClass *uspi;
uint8_t sspi;
SPISettings spiSettings;
uint8_t spi_speed;
uint8_t spi_nr = 1;
uint8_t madctrl;
uint8_t startline;
uint8_t rot[4];
uint8_t rot_t[4];
uint16_t x_addr_offs[4];
uint16_t y_addr_offs[4];
uint8_t saw_1;
uint8_t saw_2;
uint8_t saw_3;
uint8_t cur_rot;
uint8_t col_mode;
uint8_t inv_on;
uint8_t inv_off;
uint8_t sa_mode;
uint8_t dim_op;
uint8_t lutfsize;
uint8_t lutpsize;
uint16_t lutftime;
uint16_t lutptime;
uint16_t lut3time;
uint16_t lut_num;
uint8_t ep_mode;
uint8_t lut_full[LUTMAXSIZE];
uint8_t lut_partial[LUTMAXSIZE];
uint8_t lut_array[LUTMAXSIZE][5];
uint8_t lut_cnt[5];
uint8_t lut_cmd[5];
uint16_t seta_xp1;
uint16_t seta_xp2;
uint16_t seta_yp1;
uint16_t seta_yp2;
int16_t rotmap_xmin;
int16_t rotmap_xmax;
int16_t rotmap_ymin;
int16_t rotmap_ymax;
void pushColorsMono(uint16_t *data, uint16_t len, bool rgb16_swap = false);
#ifdef ESP32
// dma section
bool DMA_Enabled = false;
uint8_t spiBusyCheck = 0;
spi_transaction_t trans;
spi_device_handle_t dmaHAL;
spi_host_device_t spi_host = VSPI_HOST;
// spi_host_device_t spi_host = VSPI_HOST;
bool initDMA(bool ctrl_cs);
void deInitDMA(void);
bool dmaBusy(void);
void dmaWait(void);
void pushPixelsDMA(uint16_t* image, uint32_t len);
void pushPixels3DMA(uint8_t* image, uint32_t len);
#endif // ESP32
};
#endif // _UDISP_