Tasmota/tasmota/language/cs_CZ.h

1081 lines
43 KiB
C

/*
cs-CZ.h - localization for Czech with diacritics - Czech for Tasmota
Copyright (C) 2021 Vladimír Synek
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LANGUAGE_CS_CZ_H_
#define _LANGUAGE_CS_CZ_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF-8 is supported.
* To save code space keep text as short as possible.
* Time and Date provided by SDK can not be localized (yet).
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
* Updated until v9.3.1.1
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
#define LANGUAGE_LCID 1029
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "cs"
// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "-"
#define D_MONTH_DAY_SEPARATOR "-"
#define D_DATE_TIME_SEPARATOR "T"
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"
#define D_DAY3LIST "Ne Po Út St Čt Pá So "
#define D_MONTH3LIST "LedÚnoBřeDubKvěČvnČvcSrpZářŘíjLisPro"
// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR ","
// Common
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Kvalita vzduchu"
#define D_AP "AP" // Access Point
#define D_AS "jako"
#define D_AUTO "AUTO"
#define D_BATT "Batt" // Short for Battery
#define D_BLINK "Blikání"
#define D_BLINKOFF "BlikáníVyp"
#define D_BOOT_COUNT "Počítadlo spuštění"
#define D_BRIGHTLIGHT "Světlý"
#define D_BSSID "BSSId"
#define D_BUTTON "Tlačítko"
#define D_BY "by" // Written by me
#define D_BYTES "Bytů"
#define D_CELSIUS "°C"
#define D_CHANNEL "Channel"
#define D_CO2 "CO2"
#define D_CODE "kód" // Button code
#define D_COLDLIGHT "Studené světlo"
#define D_COMMAND "Příkaz"
#define D_CONNECTED "...připojeno"
#define D_CORS_DOMAIN "CORS Domain"
#define D_COUNT "Počítej"
#define D_COUNTER "Počítadlo"
#define D_CT_POWER "CT Power"
#define D_CURRENT "Proud" // As in Voltage and Current
#define D_DATA "Data"
#define D_DARKLIGHT "Tmavý"
#define D_DEBUG "Debug"
#define D_DEWPOINT "Dew point"
#define D_DISABLED "Zablokováno"
#define D_DISTANCE "Distance"
#define D_DNS_SERVER "Server DNS"
#define D_DO "Disolved Oxygen"
#define D_DONE "Provedeno"
#define D_DST_TIME "DST"
#define D_EC "EC"
#define D_ECO2 "eCO₂"
#define D_EMULATION "Emulace"
#define D_ENABLED "Otevřený"
#define D_ERASE "Smaž"
#define D_ERROR "Chyba"
#define D_FAHRENHEIT "Fahrenheita"
#define D_FAILED "chyba"
#define D_FALLBACK "Záložní"
#define D_FALLBACK_TOPIC "Záložní topic"
#define D_FALSE "Nepravda"
#define D_FILE "Soubor"
#define D_FLOW_RATE "Flow rate"
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
#define D_FREE_MEMORY "Volná paměť"
#define D_PSR_MAX_MEMORY "PS-RAM Memory"
#define D_PSR_FREE_MEMORY "PS-RAM free Memory"
#define D_FREQUENCY "Kmitočet"
#define D_GAS "Plyn"
#define D_GATEWAY "Výchozí brána"
#define D_GROUP "Skupina"
#define D_HOST "Server"
#define D_HALL_EFFECT "Hall Effect"
#define D_HOSTNAME "Název serveru"
#define D_HUMIDITY "Vlhkost"
#define D_ILLUMINANCE "Osvětlení"
#define D_IMMEDIATE "Okamžité" // Button immediate
#define D_INDEX "Index"
#define D_INFO "Informace"
#define D_INFRARED "Infrared"
#define D_INITIALIZED "Inicializovaný"
#define D_IP_ADDRESS "Adresa IP"
#define D_LIGHT "Světlo"
#define D_LWT "LWT"
#define D_LQI "LQI" // Zigbee Link Quality Index
#define D_MODULE "Modul"
#define D_MOISTURE "Moisture"
#define D_MQTT "MQTT"
#define D_MULTI_PRESS "několikeré-stisknutí"
#define D_NOISE "Hluk"
#define D_NONE "Žádný"
#define D_O2 "Oxygen"
#define D_OFF "Vyp."
#define D_OFFLINE "Offline" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
#define D_OK "OK"
#define D_ON "Zap."
#define D_ONLINE "Online" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
#define D_ORP "ORP"
#define D_PASSWORD "Heslo"
#define D_PH "pH"
#define D_PORT "Port"
#define D_POWER_FACTOR "Účiník"
#define D_POWERUSAGE "Příkon"
#define D_POWERUSAGE_ACTIVE "Činný příkon"
#define D_POWERUSAGE_APPARENT "Zdánlivý příkon"
#define D_POWERUSAGE_REACTIVE "Jalový příkon"
#define D_PRESSURE "Tlak"
#define D_PRESSUREATSEALEVEL "Tlak na hladině moře"
#define D_PROGRAM_FLASH_SIZE "Velikost paměti flash"
#define D_PROGRAM_SIZE "Velikost programu"
#define D_PROJECT "Projekt"
#define D_RAIN "Rain"
#define D_RANGE "Range"
#define D_RECEIVED "Přijatý"
#define D_RESTART "Restart"
#define D_RESTARTING "Restartování"
#define D_RESTART_REASON "Příčina restartu"
#define D_RESTORE "Obnovit"
#define D_RETAINED "Zachováno"
#define D_RULE "Rule"
#define D_SAVE "Ulož"
#define D_SENSOR "Sensor"
#define D_SSID "SSID"
#define D_START "Start"
#define D_STD_TIME "STD"
#define D_STOP "Stop"
#define D_SUBNET_MASK "Maska podsítě"
#define D_SUBSCRIBE_TO "Přihlaš se do"
#define D_UNSUBSCRIBE_FROM "Unsubscribe from"
#define D_SUCCESSFUL "úspěšné."
#define D_SUNRISE "Svítání"
#define D_SUNSET "Soumrak"
#define D_TEMPERATURE "Teplota"
#define D_TO "do"
#define D_TOGGLE "Přepni"
#define D_TOPIC "Topic"
#define D_TOTAL_USAGE "Total Usage"
#define D_TRANSMIT "Odešli"
#define D_TRUE "Pravda"
#define D_TVOC "TVOC"
#define D_UPGRADE "aktualizace"
#define D_UPLOAD "Nahrání..."
#define D_UPTIME "Uptime"
#define D_USER "Uživatel"
#define D_UTC_TIME "UTC"
#define D_UV_INDEX "UV Index"
#define D_UV_INDEX_1 "Nízký"
#define D_UV_INDEX_2 "Střední"
#define D_UV_INDEX_3 "Vysoký"
#define D_UV_INDEX_4 "Nebezpečný"
#define D_UV_INDEX_5 "Popál1/2"
#define D_UV_INDEX_6 "Popál3"
#define D_UV_INDEX_7 "MimoRozsah"
#define D_UV_LEVEL "úroveň UV"
#define D_UV_POWER "UV Power"
#define D_VERSION "Verze"
#define D_VOLTAGE "Napětí"
#define D_VOLUME "Volume"
#define D_WEIGHT "Hmotnost"
#define D_WARMLIGHT "Teplé světlo"
#define D_WEB_SERVER "Web Server"
#define D_SOC "State of Charge"
#define D_SOH "State of Health"
// tasmota.ino
#define D_WARNING_MINIMAL_VERSION "UPOZORNĚNÍ Tato verze nepodporuje trvalé nastavení"
#define D_LEVEL_10 "úroveň 1-0"
#define D_LEVEL_01 "úroveň 0-1"
#define D_SERIAL_LOGGING_DISABLED "Logování na sériovém portu ukončeno"
#define D_SYSLOG_LOGGING_REENABLED "Obnoven zápis do Syslog"
#define D_SET_BAUDRATE_TO "Nastavení rychlosti přenosu na"
#define D_RECEIVED_TOPIC "Přijatý topic"
#define D_DATA_SIZE "Velikost dat"
#define D_ANALOG_INPUT "Analogový vstup"
// support.ino
#define D_OSWATCH "osWatch"
#define D_BLOCKED_LOOP "Zablokování smyčky"
#define D_WPS_FAILED_WITH_STATUS "Chyba WPSconfig se statusem"
#define D_ACTIVE_FOR_3_MINUTES "aktivní 3 minuty"
#define D_FAILED_TO_START "nepodařilo se spustit"
#define D_PATCH_ISSUE_2186 "Chyba 2186"
#define D_CONNECTING_TO_AP "Připojování k AP"
#define D_IN_MODE "v módu"
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Chyba připojení, nebyla obdržena IP adresa"
#define D_CONNECT_FAILED_AP_NOT_REACHED "Chyba připojení, nedostupný AP"
#define D_CONNECT_FAILED_WRONG_PASSWORD "Chyba připojení"
#define D_CONNECT_FAILED_AP_TIMEOUT "Chyba připojení, uplynul AP timeout"
#define D_ATTEMPTING_CONNECTION "Připojování..."
#define D_CHECKING_CONNECTION "Zkouška spojení..."
#define D_QUERY_DONE "Vyslání dotazu. Nalezena služba MQTT"
#define D_MQTT_SERVICE_FOUND "Služba MQTT byla nalezena"
#define D_FOUND_AT "znalezeno v"
#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host nebyl nalezen"
// settings.ino
#define D_SAVED_TO_FLASH_AT "Uloženo do paměti flash v"
#define D_LOADED_FROM_FLASH_AT "Staženo z paměti flash z"
#define D_USE_DEFAULTS "Použij defaultní hodnoty"
#define D_ERASED_SECTOR "Smazaný sektor"
// xdrv_02_webserver.ino
#define D_NOSCRIPT "Pro používání prostředí Tasmota povolte JavaScript"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMÁLNÍ<br>prosím zaktualizujte"
#define D_WEBSERVER_ACTIVE_ON "Aktivní Web server"
#define D_WITH_IP_ADDRESS "na IP adrese"
#define D_WEBSERVER_STOPPED "Web server zastaven"
#define D_FILE_NOT_FOUND "Soubor nebyl nalezen"
#define D_REDIRECTED "Přesměrování na vlastní portál"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wi-Fi manager nastaví AP a zachová STA"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wi-Fi manager nastaví Access Point"
#define D_TRYING_TO_CONNECT "Zkouším připojit zařízení k síti"
#define D_RESTART_IN "Restart"
#define D_SECONDS "sekund"
#define D_DEVICE_WILL_RESTART "Zařízení bude zrestartováno během několika sekund"
#define D_BUTTON_TOGGLE "Přepínač"
#define D_CONFIGURATION "Nastavení"
#define D_INFORMATION "Informace"
#define D_FIRMWARE_UPGRADE "Aktualizace firmware"
#define D_MANAGEMENT "Consoles"
#define D_CONSOLE "Konzole"
#define D_CONFIRM_RESTART "Potvrzení restartu"
#define D_CONFIGURE_MODULE "Nastavení modulu"
#define D_CONFIGURE_WIFI "Nastavení WiFi"
#define D_CONFIGURE_MQTT "Nastavení MQTT"
#define D_CONFIGURE_DOMOTICZ "Nastavení Domoticz"
#define D_CONFIGURE_LOGGING "Nastavení logování"
#define D_CONFIGURE_OTHER "Jiná nastavení"
#define D_CONFIRM_RESET_CONFIGURATION "Potvrzení resetu nastavení"
#define D_RESET_CONFIGURATION "Reset nastavení"
#define D_BACKUP_CONFIGURATION "Záloha nastavení"
#define D_RESTORE_CONFIGURATION "Obnovení nastavení"
#define D_MAIN_MENU "Hlavní menu"
#define D_MODULE_PARAMETERS "Nastavení modulu"
#define D_MODULE_TYPE "Typ modulu"
#define D_PULLUP_ENABLE "Tlačítko/Spínač bez pull-up"
#define D_ADC "ADC"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "Serial In"
#define D_SERIAL_OUT "Serial Out"
#define D_WIFI_PARAMETERS "Nastavení WiFi"
#define D_SCAN_FOR_WIFI_NETWORKS "Scan sítí WiFi"
#define D_SCAN_DONE "Scan dokončen"
#define D_NO_NETWORKS_FOUND "Síť nebyla nalezena"
#define D_REFRESH_TO_SCAN_AGAIN "Zopakovat scan"
#define D_DUPLICATE_ACCESSPOINT "Kopie AP"
#define D_SKIPPING_LOW_QUALITY "Přeskočení z důvodu kvality signálu"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
#define D_AP1_SSID "WiFi Network"
#define D_AP1_SSID_HELP "Type or Select your WiFi Network"
#define D_AP2_SSID "WiFi Network 2"
#define D_AP2_SSID_HELP "Type your Alternative WiFi Network"
#define D_AP_PASSWORD "Heslo WiFi"
#define D_AP_PASSWORD_HELP "Enter your WiFi Password"
#define D_SELECT_YOUR_WIFI_NETWORK "Select your WiFi Network"
#define D_SHOW_MORE_WIFI_NETWORKS "Scan for all WiFi Networks"
#define D_SHOW_MORE_OPTIONS "More Options"
#define D_CHECK_CREDENTIALS "Please, check your credentials"
#define D_SUCCESSFUL_WIFI_CONNECTION "Successful WiFi Connection"
#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "Now you can close this window"
#define D_REDIRECTING_TO_NEW_IP "Redirecting to new device's IP address"
#define D_MQTT_PARAMETERS "Nastavení MQTT"
#define D_CLIENT "Klient"
#define D_FULL_TOPIC "Celý topic"
#define D_LOGGING_PARAMETERS "Volba logování"
#define D_SERIAL_LOG_LEVEL "Seriová úroveň logu"
#define D_MQTT_LOG_LEVEL "Mqtt log level"
#define D_WEB_LOG_LEVEL "Webová úroveň logu"
#define D_SYS_LOG_LEVEL "Systemová úroveň logu"
#define D_MORE_DEBUG "Více debug informací"
#define D_SYSLOG_HOST "Syslog host"
#define D_SYSLOG_PORT "Syslog port"
#define D_TELEMETRY_PERIOD "Interval telemetrie"
#define D_OTHER_PARAMETERS "Další nastavení"
#define D_TEMPLATE "Šablona"
#define D_ACTIVATE "Aktivovat"
#define D_DEVICE_NAME "Device Name"
#define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
#define D_MQTT_ENABLE "MQTT aktivní"
#define D_MQTT_TLS_ENABLE "MQTT TLS"
#define D_HTTP_API "HTTP API"
#define D_HTTP_API_ENABLE "HTTP API aktivní"
#define D_FRIENDLY_NAME "Friendly Name"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue Bridge"
#define D_SINGLE_DEVICE "single device"
#define D_MULTI_DEVICE "multi device"
#define D_CONFIGURE_TEMPLATE "Nastavení šablony"
#define D_TEMPLATE_PARAMETERS "Parametry šablony"
#define D_TEMPLATE_NAME "Název"
#define D_BASE_TYPE "Vzor z"
#define D_TEMPLATE_FLAGS "Volby"
#define D_SAVE_CONFIGURATION "Ulož nastavení"
#define D_CONFIGURATION_SAVED "Nastavení uloženo"
#define D_CONFIGURATION_RESET "Nastavení resetováno"
#define D_PROGRAM_VERSION "Verze programu"
#define D_BUILD_DATE_AND_TIME "Datum a čas kompilace"
#define D_CORE_AND_SDK_VERSION "Verze Core/SDK"
#define D_FLASH_WRITE_COUNT "Počet zápisů do paměti"
#define D_MAC_ADDRESS "Adresa MAC"
#define D_MQTT_HOST "Host MQTT"
#define D_MQTT_PORT "Port MQTT"
#define D_MQTT_CLIENT "Klient MQTT"
#define D_MQTT_USER "Uživatel MQTT"
#define D_MQTT_TOPIC "Topic MQTT"
#define D_MQTT_GROUP_TOPIC "Topic skupiny MQTT"
#define D_MQTT_FULL_TOPIC "Celý topic MQTT"
#define D_MQTT_NO_RETAIN "MQTT No Retain"
#define D_MDNS_DISCOVERY "Získávání mDNS"
#define D_MDNS_ADVERTISE "Rozesílání mDNS"
#define D_ESP_CHIP_ID "ID systému ESP"
#define D_FLASH_CHIP_ID "ID systému paměti flash"
#define D_FLASH_CHIP_SIZE "Velikost flash"
#define D_FREE_PROGRAM_SPACE "Volné místo pro program"
#define D_UPGRADE_BY_WEBSERVER "Aktualizace z Web serveru"
#define D_OTA_URL "URL OTA"
#define D_START_UPGRADE "Start aktualizace"
#define D_UPGRADE_BY_FILE_UPLOAD "Aktualizace nahráním souboru"
#define D_UPLOAD_STARTED "Nahrávání zahájeno"
#define D_UPGRADE_STARTED "Zahájení aktualizace"
#define D_UPLOAD_DONE "Nahrávání ukončeno"
#define D_UPLOAD_TRANSFER "Upload transfer"
#define D_TRANSFER_STARTED "Transfer started"
#define D_UPLOAD_ERR_1 "Soubor nebyl vybrán"
#define D_UPLOAD_ERR_2 "Málo místa"
#define D_UPLOAD_ERR_3 "Invalid file signature"
#define D_UPLOAD_ERR_4 "Velikost programu je větší než skutečná velikost paměti flash"
#define D_UPLOAD_ERR_5 "Chyba nahrávání, nesouhlasí porovnávané bity"
#define D_UPLOAD_ERR_6 "Chyba nahrávání. Spuštěn zápis do logu na úrovni 3"
#define D_UPLOAD_ERR_7 "Nahrávání přerušeno"
#define D_UPLOAD_ERR_8 "Špatný soubor"
#define D_UPLOAD_ERR_9 "Soubor je příliš velký"
#define D_UPLOAD_ERR_10 "Chyba inicializace RF chipu"
#define D_UPLOAD_ERR_11 "Chyba smazání RF chipu"
#define D_UPLOAD_ERR_12 "Chyba při zápisu do RF chipu"
#define D_UPLOAD_ERR_13 "Chyba dekódování RF firmwaru"
#define D_UPLOAD_ERR_14 "Not compatible"
#define D_UPLOAD_ERROR_CODE "Chyba nahrávání"
#define D_ENTER_COMMAND "Vlož příkaz"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
#define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"
// xdrv_01_mqtt.ino
#define D_FINGERPRINT "Verifikuj otisk TLS..."
#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
#define D_RETRY_IN "Zopakuji za"
#define D_VERIFIED "Ověřeno otisk "
#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"
// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "Multicast je vypnutý"
#define D_MULTICAST_REJOINED "Multicast opět připojený"
#define D_MULTICAST_JOIN_FAILED "Multicast neúspěšný"
#define D_FAILED_TO_SEND_RESPONSE "Nepodařilo se odeslat odpověď"
#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo základní událost"
#define D_WEMO_EVENT_SERVICE "WeMo servisní událost"
#define D_WEMO_META_SERVICE "WeMo meta událost"
#define D_WEMO_SETUP "WeMo setup"
#define D_RESPONSE_SENT "Odpověď odeslána"
#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue setup"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API není implementováno"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST args"
#define D_3_RESPONSE_PACKETS_SENT "3 pakety odpovědi odeslány"
// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Nastavení Domoticz"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "Key idx"
#define D_DOMOTICZ_SWITCH_IDX "Spinac idx"
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
#define D_DOMOTICZ_TEMP "Temp"
#define D_DOMOTICZ_TEMP_HUM "Temp,Vlhk"
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak"
#define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie"
#define D_DOMOTICZ_ILLUMINANCE "Osvětlení"
#define D_DOMOTICZ_COUNT "Počítadlo/PM1"
#define D_DOMOTICZ_VOLTAGE "Napětí/PM2,5"
#define D_DOMOTICZ_CURRENT "Proud/PM10"
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek"
// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "Nastavení Časovače"
#define D_TIMER_PARAMETERS "Časovač"
#define D_TIMER_ENABLE "Povol časovače"
#define D_TIMER_ARM "Aktivní"
#define D_TIMER_TIME "Čas"
#define D_TIMER_DAYS "Dny"
#define D_TIMER_REPEAT "Opakovat"
#define D_TIMER_OUTPUT "Výstup"
#define D_TIMER_ACTION "Napájení"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "Nastavení KNX"
#define D_KNX_PARAMETERS "KNX parametry"
#define D_KNX_GENERAL_CONFIG "Obecné"
#define D_KNX_PHYSICAL_ADDRESS "Fyzická adresa"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Musí být jedinečná v síti KNX )"
#define D_KNX_ENABLE "Povol KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data k odeslání na skupinové adresy"
#define D_ADD "Přidej"
#define D_DELETE "Smaž"
#define D_REPLY "Odpověď"
#define D_KNX_GROUP_ADDRESS_TO_READ "Skupinové adresy pro příjem dat z"
#define D_RECEIVED_FROM "Přijato z"
#define D_KNX_COMMAND_WRITE "Zapiš"
#define D_KNX_COMMAND_READ "Čti"
#define D_KNX_COMMAND_OTHER "Jiné"
#define D_SENT_TO "pošli"
#define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
#define D_KNX_ENHANCEMENT "Communication Enhancement"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"
#define D_KNX_TX_SCENE "KNX SCENE TX"
#define D_KNX_RX_SCENE "KNX SCENE RX"
// xdrv_23_zigbee
#define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join"
#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
#define D_ZIGBEE_NOT_STARTED "Zigbee not started"
#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
#define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
#define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
#define D_ZIGBEE_MAP "Zigbee Map"
#define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join"
#define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key"
#define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device"
#define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute"
#define D_ZIGBEE_INVALID_PARAM "Invalid parameter"
#define D_ZIGBEE_MISSING_PARAM "Missing parameters"
#define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s"
#define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command"
#define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload"
#define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s"
#define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)"
#define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list"
#define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type"
#define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects"
#define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset"
#define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address"
#define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Spotřeba Dnes"
#define D_ENERGY_YESTERDAY "Spotřeba Včera"
#define D_ENERGY_TOTAL "Celková spotřeba"
// xdrv_27_shutter.ino
#define D_OPEN "Open"
#define D_CLOSE "Close"
#define D_DOMOTICZ_SHUTTER "Shutter"
// xdrv_28_pcf8574.ino
#define D_CONFIGURE_PCF8574 "Configure PCF8574"
#define D_PCF8574_PARAMETERS "PCF8574 parameters"
#define D_INVERT_PORTS "Invert Ports"
#define D_DEVICE "Device"
#define D_DEVICE_INPUT "Input"
#define D_DEVICE_OUTPUT "Output"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Sensor DS18x20 obsazen"
#define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"
#define D_SENSORS_FOUND "Nalezen sensor DS18x20"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Čekání na"
#define D_START_SIGNAL_LOW "nízký startovní signál"
#define D_START_SIGNAL_HIGH "vysoký startovní signál"
#define D_PULSE "impuls"
#define D_CHECKSUM_FAILURE "Chybný kontrolní součet"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor neobdržel příkaz ACK"
#define D_SHT1X_FOUND "SHT1X nalezen"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "částic"
// xsns_27_apds9960.ino
#define D_GESTURE "Gesto"
#define D_COLOR_RED "Červená"
#define D_COLOR_GREEN "Zelená"
#define D_COLOR_BLUE "Modrá"
#define D_CCT "CCT"
#define D_PROXIMITY "Blízkost"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "Accel. osa-X"
#define D_AY_AXIS "Accel. osa-Y"
#define D_AZ_AXIS "Accel. osa-Z"
#define D_GX_AXIS "Gyro osa-X"
#define D_GY_AXIS "Gyro osa-Y"
#define D_GZ_AXIS "Gyro osa-Z"
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Odstraňte zátěž"
#define D_HX_CAL_REFERENCE "Vložte referenční zátěž"
#define D_HX_CAL_DONE "Zkalibrováno"
#define D_HX_CAL_FAIL "Chyba kalibrace"
#define D_RESET_HX711 "Reset váhy"
#define D_CONFIGURE_HX711 "Konfigurace váhy"
#define D_HX711_PARAMETERS "Parametry váhy"
#define D_ITEM_WEIGHT "Vlastní hmotnost"
#define D_REFERENCE_WEIGHT "Referenční hmotnost"
#define D_CALIBRATE "Kalibruj"
#define D_CALIBRATION "Kalibrace"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Směr větru"
#define D_TX20_WIND_SPEED "Rychlost větru"
#define D_TX20_WIND_SPEED_MIN "Minimální rychlost větru"
#define D_TX20_WIND_SPEED_MAX "Maximální rychlost větru"
#define D_TX20_NORTH "S"
#define D_TX20_EAST "V"
#define D_TX20_SOUTH "J"
#define D_TX20_WEST "Z"
// xsns_53_sml.ino
#define D_TPWRIN "Energy Total-In"
#define D_TPWRIN0 "Energy Total-In T0"
#define D_TPWRIN1 "Energy Total-In T1"
#define D_TPWROUT "Energy Total-Out"
#define D_TPWRCURR "Active Power-In/Out"
#define D_TPWRCURR1 "Active Power-In p1"
#define D_TPWRCURR2 "Active Power-In p2"
#define D_TPWRCURR3 "Active Power-In p3"
#define D_Strom_L1 "Current L1"
#define D_Strom_L2 "Current L2"
#define D_Strom_L3 "Current L3"
#define D_Spannung_L1 "Voltage L1"
#define D_Spannung_L2 "Voltage L2"
#define D_Spannung_L3 "Voltage L3"
#define D_METERNR "Meter_number"
#define D_METERSID "Service ID"
#define D_GasIN "Counter"
#define D_H2oIN "Counter"
#define D_StL1L2L3 "Current L1+L2+L3"
#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
// xsns_86_tfminiplus.ino
#define D_SIGNALSTRENGTH "Signal Strength"
#define D_CHIPTEMPERATURE "Chip Temperature"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE "Není"
#define D_SENSOR_USER "User"
#define D_SENSOR_OPTION "Option"
#define D_SENSOR_DHT11 "DHT11"
#define D_SENSOR_AM2301 "AM2301"
#define D_SENSOR_SI7021 "SI7021"
#define D_SENSOR_DS18X20 "DS18x20"
#define D_SENSOR_I2C_SCL "I2C SCL"
#define D_SENSOR_I2C_SDA "I2C SDA"
#define D_SENSOR_I2S_OUT_DATA "I2S Out Data"
#define D_SENSOR_I2S_OUT_CLK "I2S Out Clk"
#define D_SENSOR_I2S_OUT_SLCT "I2S Out Slct"
#define D_SENSOR_I2S_IN_DATA "I2S In Data"
#define D_SENSOR_I2S_IN_CLK "I2S In Clk"
#define D_SENSOR_I2S_IN_SLCT "I2S In Slct"
#define D_SENSOR_WS2812 "WS2812"
#define D_SENSOR_DFR562 "MP3 Player"
#define D_SENSOR_IRSEND "IRsend"
#define D_SENSOR_SWITCH "Spínač" // Suffix "1"
#define D_SENSOR_BUTTON "Tlačítko" // Suffix "1"
#define D_SENSOR_RELAY "Relé" // Suffix "1i"
#define D_SENSOR_LED "Led" // Suffix "1i"
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
#define D_SENSOR_PWM "PWM" // Suffix "1",
#define D_SENSOR_COUNTER "Počítadlo" // Suffix "1"
#define D_SENSOR_INTERRUPT "Interrupt"
#define D_SENSOR_INPUT "Input"
#define D_SENSOR_IRRECV "IRrecv"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX "SAir Rx"
#define D_SENSOR_SAIR_TX "SAir Tx"
#define D_SENSOR_SPI_CS "SPI CS"
#define D_SENSOR_SPI_DC "SPI DC"
#define D_SENSOR_SPI_MISO "SPI MISO"
#define D_SENSOR_SPI_MOSI "SPI MOSI"
#define D_SENSOR_SPI_CLK "SPI CLK"
#define D_SENSOR_BACKLIGHT "Backlight"
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
#define D_SENSOR_HPMA_RX "HPMA Rx"
#define D_SENSOR_HPMA_TX "HPMA Tx"
#define D_SENSOR_SBR_RX "SerBr Rx"
#define D_SENSOR_SBR_TX "SerBr Tx"
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
#define D_SENSOR_SDM72_TX "SDM72 Tx"
#define D_SENSOR_SDM72_RX "SDM72 Rx"
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
#define D_SENSOR_SDM630_TX "SDM630 Tx"
#define D_SENSOR_SDM630_RX "SDM630 Rx"
#define D_SENSOR_WE517_TX "WE517 Tx"
#define D_SENSOR_WE517_RX "WE517 Rx"
#define D_SENSOR_TM1637_CLK "TM1637 CLK"
#define D_SENSOR_TM1637_DIO "TM1637 DIO"
#define D_SENSOR_TM1638_CLK "TM1638 CLK"
#define D_SENSOR_TM1638_DIO "TM1638 DIO"
#define D_SENSOR_TM1638_STB "TM1638 STB"
#define D_SENSOR_MAX7219_DIN "MAX7219 DIN"
#define D_SENSOR_MAX7219_CS "MAX7219 CS"
#define D_SENSOR_MAX7219_CLK "MAX7219 CLK"
#define D_SENSOR_HX711_SCK "HX711 SCK"
#define D_SENSOR_HX711_DAT "HX711 DAT"
#define D_SENSOR_FTC532 "FTC532"
#define D_SENSOR_BS814_CLK "BS814 CLK"
#define D_SENSOR_BS814_DAT "BS814 DAT"
#define D_SENSOR_TX2X_TX "TX2x"
#define D_SENSOR_RFSEND "RFSend"
#define D_SENSOR_RFRECV "RFrecv"
#define D_SENSOR_TUYA_TX "Tuya Tx"
#define D_SENSOR_TUYA_RX "Tuya Rx"
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO "SSPI MISO"
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
#define D_SENSOR_SSPI_CS "SSPI CS"
#define D_SENSOR_SSPI_DC "SSPI DC"
#define D_SENSOR_RF_SENSOR "RF Sensor"
#define D_SENSOR_AZ_RX "AZ Rx"
#define D_SENSOR_AZ_TX "AZ Tx"
#define D_SENSOR_MAX31855_CS "MX31855 CS"
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
#define D_SENSOR_MAX31855_DO "MX31855 DO"
#define D_SENSOR_MAX31865_CS "MX31865 CS"
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
#define D_SENSOR_HLW_CF "HLW8012 CF"
#define D_SENSOR_HJL_CF "BL0937 CF"
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
#define D_SENSOR_CSE7761_TX "CSE7761 Tx"
#define D_SENSOR_CSE7761_RX "CSE7761 Rx"
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
#define D_SENSOR_PN532_TX "PN532 Tx"
#define D_SENSOR_PN532_RX "PN532 Rx"
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_P9813_CLK "P9813 Clk"
#define D_SENSOR_P9813_DAT "P9813 Dat"
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
#define D_SENSOR_ARIRFSEL "ALux IrSel"
#define D_SENSOR_TXD "Serial Tx"
#define D_SENSOR_RXD "Serial Rx"
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
#define D_SENSOR_HRE_CLOCK "HRE Clock"
#define D_SENSOR_HRE_DATA "HRE Data"
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
#define D_SENSOR_BUZZER "Buzzer"
#define D_SENSOR_DISP_RESET "Display Rst"
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
#define D_SENSOR_IBEACON_TX "iBeacon TX"
#define D_SENSOR_IBEACON_RX "iBeacon RX"
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
#define D_SENSOR_CC1101_CS "CC1101 CS"
#define D_SENSOR_A4988_DIR "A4988 DIR"
#define D_SENSOR_A4988_STP "A4988 STP"
#define D_SENSOR_A4988_ENA "A4988 ENA"
#define D_SENSOR_A4988_MS1 "A4988 MS1"
#define D_SENSOR_OUTPUT_HI "Output Hi"
#define D_SENSOR_OUTPUT_LO "Output Lo"
#define D_SENSOR_AS608_TX "AS608 Tx"
#define D_SENSOR_AS608_RX "AS608 Rx"
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
#define D_SENSOR_DEEPSLEEP "DeepSleep"
#define D_SENSOR_EXS_ENABLE "EXS Enable"
#define D_SENSOR_CLIENT_TX "Client TX"
#define D_SENSOR_CLIENT_RX "Client RX"
#define D_SENSOR_CLIENT_RESET "Client RST"
#define D_SENSOR_GPS_RX "GPS RX"
#define D_SENSOR_GPS_TX "GPS TX"
#define D_SENSOR_HM10_RX "HM10 RX"
#define D_SENSOR_HM10_TX "HM10 TX"
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
#define D_SENSOR_BL0940_RX "BL0940 Rx"
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
#define D_SENSOR_HRXL_RX "HRXL Rx"
#define D_SENSOR_DYP_RX "DYP Rx"
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
#define D_SENSOR_AS3935 "AS3935"
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
#define D_SENSOR_ADC_INPUT "ADC Input"
#define D_SENSOR_ADC_TEMP "ADC Temp"
#define D_SENSOR_ADC_LIGHT "ADC Light"
#define D_SENSOR_ADC_BUTTON "ADC Button"
#define D_SENSOR_ADC_RANGE "ADC Range"
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
#define D_SENSOR_ADC_PH "ADC pH"
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
#define D_SENSOR_TCP_TXD "TCP Tx"
#define D_SENSOR_TCP_RXD "TCP Rx"
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
#define D_SENSOR_PROJECTOR_CTRL_TX "DLP Tx"
#define D_SENSOR_PROJECTOR_CTRL_RX "DLP Rx"
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
#define D_SENSOR_RC522_RST "RC522 Rst"
#define D_SENSOR_RC522_CS "RC522 CS"
#define D_SENSOR_NRF24_CS "NRF24 CS"
#define D_SENSOR_NRF24_DC "NRF24 DC"
#define D_SENSOR_XPT2046_CS "XPT2046 CS"
#define D_SENSOR_ILI9341_CS "ILI9341 CS"
#define D_SENSOR_ILI9341_DC "ILI9341 DC"
#define D_SENSOR_ILI9488_CS "ILI9488 CS"
#define D_SENSOR_EPAPER29_CS "EPaper29 CS"
#define D_SENSOR_EPAPER42_CS "EPaper42 CS"
#define D_SENSOR_SSD1351_CS "SSD1351 CS"
#define D_SENSOR_SSD1351_DC "SSD1351 DC"
#define D_SENSOR_RA8876_CS "RA8876 CS"
#define D_SENSOR_ST7789_CS "ST7789 CS"
#define D_SENSOR_ST7789_DC "ST7789 DC"
#define D_SENSOR_SSD1331_CS "SSD1331 CS"
#define D_SENSOR_SSD1331_DC "SSD1331 DC"
#define D_SENSOR_SDCARD_CS "SDCard CS"
#define D_SENSOR_WIEGAND_D0 "Wiegand D0"
#define D_SENSOR_WIEGAND_D1 "Wiegand D1"
#define D_SENSOR_NEOPOOL_TX "NeoPool Tx"
#define D_SENSOR_NEOPOOL_RX "NeoPool Rx"
#define D_SENSOR_VL53L0X_XSHUT "VL53L0X XSHUT"
#define D_SENSOR_TFMINIPLUS_TX "TFmini+ TX"
#define D_SENSOR_TFMINIPLUS_RX "TFmini+ RX"
#define D_SENSOR_ZEROCROSS "ZC Pulse"
#define D_SENSOR_HALLEFFECT "HallEffect"
#define D_SENSOR_EPD_DATA "EPD Data"
#define D_SENSOR_MCP2515_CS "MCP2515 CS"
#define D_SENSOR_HRG15_RX "HRG15 Rx"
#define D_SENSOR_HRG15_TX "HRG15 Tx"
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
// Units
#define D_UNIT_AMPERE "A"
#define D_UNIT_CELSIUS "C"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_DEGREE "°"
#define D_UNIT_FAHRENHEIT "F"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "hod"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_INCREMENTS "inc"
#define D_UNIT_KELVIN "K"
#define D_UNIT_KILOMETER "km"
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
#define D_UNIT_KILOOHM "kΩ"
#define D_UNIT_KILOWATTHOUR "kWh"
#define D_UNIT_LITERS "L"
#define D_UNIT_LITERS_PER_MIN "L/m"
#define D_UNIT_LUX "lx"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³"
#define D_UNIT_MICROMETER "µm"
#define D_UNIT_MICROSECOND "µs"
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
#define D_UNIT_MILLIAMPERE "mA"
#define D_UNIT_MILLILITERS "ml"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "mmHg"
#define D_UNIT_MILLISECOND "ms"
#define D_UNIT_MILLIVOLT "mV"
#define D_UNIT_MINUTE "min"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_MILIGRAMS_PER_LITER "mg/L"
#define D_UNIT_PERCENT "%%"
#define D_UNIT_PRESSURE "hPa"
#define D_UNIT_SECOND "sec"
#define D_UNIT_SECTORS "sektory"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "VAr"
#define D_UNIT_VOLT "V"
#define D_UNIT_WATT "W"
#define D_UNIT_WATTHOUR "Wh"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
#define D_NEW_ADDRESS "Setting address to"
#define D_OUT_OF_RANGE "Out of Range"
#define D_SENSOR_DETECTED "detected"
//SDM220, SDM120, SDM72, LE01MR
#define D_EXPORT_POWER "Export Power"
#define D_IMPORT_POWER "Import Power"
#define D_PHASE_ANGLE "Phase Angle"
#define D_IMPORT_ACTIVE "Import Active"
#define D_EXPORT_ACTIVE "Export Active"
#define D_IMPORT_REACTIVE "Import Reactive"
#define D_EXPORT_REACTIVE "Export Reactive"
#define D_TOTAL_REACTIVE "Total Reactive"
#define D_UNIT_KWARH "kVArh"
#define D_UNIT_ANGLE "Deg"
#define D_TOTAL_ACTIVE "Total Active"
//SOLAXX1
#define D_PV1_VOLTAGE "PV1 Voltage"
#define D_PV1_CURRENT "PV1 Current"
#define D_PV1_POWER "PV1 Power"
#define D_PV2_VOLTAGE "PV2 Voltage"
#define D_PV2_CURRENT "PV2 Current"
#define D_PV2_POWER "PV2 Power"
#define D_SOLAR_POWER "Solar Power"
#define D_INVERTER_POWER "Inverter Power"
#define D_STATUS "Status"
#define D_WAITING "Waiting"
#define D_CHECKING "Checking"
#define D_WORKING "Working"
#define D_FAILURE "Failure"
#define D_SOLAX_ERROR_0 "No Error Code"
#define D_SOLAX_ERROR_1 "Grid Lost Fault"
#define D_SOLAX_ERROR_2 "Grid Voltage Fault"
#define D_SOLAX_ERROR_3 "Grid Frequency Fault"
#define D_SOLAX_ERROR_4 "Pv Voltage Fault"
#define D_SOLAX_ERROR_5 "Isolation Fault"
#define D_SOLAX_ERROR_6 "Over Temperature Fault"
#define D_SOLAX_ERROR_7 "Fan Fault"
#define D_SOLAX_ERROR_8 "Other Device Fault"
//xdrv_10_scripter.ino
#define D_CONFIGURE_SCRIPT "Edit script"
#define D_SCRIPT "edit script"
#define D_SDCARD_UPLOAD "file upload"
#define D_UFSDIR "ufs card directory"
#define D_UPL_DONE "Done"
#define D_SCRIPT_CHARS_LEFT "chars left"
#define D_SCRIPT_CHARS_NO_MORE "no more chars"
#define D_SCRIPT_DOWNLOAD "Download"
#define D_SCRIPT_ENABLE "script enable"
#define D_SCRIPT_UPLOAD "Upload"
#define D_SCRIPT_UPLOAD_FILES "Upload files"
//xdrv_50_filesystem.ino
#define D_MANAGE_FILE_SYSTEM "Manage File system"
#define D_FS_SIZE "Size"
#define D_FS_FREE "Free"
#define D_NEW_FILE "newfile.txt"
#define D_CREATE_NEW_FILE "Create and edit new file"
#define D_EDIT_FILE "Edit File"
#define D_CONFIRM_FILE_DEL "Confirm file deletion"
//xsns_67_as3935.ino
#define D_AS3935_GAIN "gain:"
#define D_AS3935_ENERGY "energy:"
#define D_AS3935_DISTANCE "distance:"
#define D_AS3935_DISTURBER "disturber:"
#define D_AS3935_VRMS "µVrms:"
#define D_AS3935_APRX "aprx.:"
#define D_AS3935_AWAY "away"
#define D_AS3935_LIGHT "lightning"
#define D_AS3935_OUT "lightning out of range"
#define D_AS3935_NOT "distance not determined"
#define D_AS3935_ABOVE "lightning overhead"
#define D_AS3935_NOISE "noise detected"
#define D_AS3935_DISTDET "disturber detected"
#define D_AS3935_INTNOEV "Interrupt with no Event!"
#define D_AS3935_FLICKER "IRQ flicker!"
#define D_AS3935_POWEROFF "Power Off"
#define D_AS3935_NOMESS "listening..."
#define D_AS3935_ON "On"
#define D_AS3935_OFF "Off"
#define D_AS3935_INDOORS "Indoors"
#define D_AS3935_OUTDOORS "Outdoors"
#define D_AS3935_CAL_FAIL "calibration failed"
#define D_AS3935_CAL_OK "calibration set to:"
//xsns_68_opentherm.ino
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
// xnrg_15_teleinfo Denky (Teleinfo)
#define D_CONTRACT "Contract"
#define D_POWER_LOAD "Power load"
#define D_CURRENT_TARIFF "Current Tariff"
#define D_TARIFF "Tariff"
#define D_OVERLOAD "ADPS"
#define D_MAX_POWER "Max Power"
#define D_MAX_CURRENT "Max Current"
// xsns_79_as608.ino
#define D_FP_ENROLL_PLACEFINGER "Place finger"
#define D_FP_ENROLL_REMOVEFINGER "Remove finger"
#define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
#define D_FP_ENROLL_RETRY "Error so retry"
#define D_FP_ENROLL_RESTART "Restart"
#define D_FP_ENROLL_ERROR "Error"
#define D_FP_ENROLL_RESET "Reset"
#define D_FP_ENROLL_ACTIVE "Active"
#define D_FP_ENROLL_INACTIVE "Inactive"
// Indexed by Adafruit_Fingerprint.h defines
#define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
#define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
#define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
#define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
#define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
#define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
#define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
#define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
#define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
#define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
#define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
#define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
#define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
#define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
#define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
#define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
#define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
#define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
#define D_FP_ADDRCODE "Address code" // 0x20 Address code
#define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
#define D_FP_UNKNOWNERROR "Error" // Any other error
// xsns_83_neopool.ino
#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names
#define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife (yellow)"
#define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic (blue)"
#define D_NEOPOOL_MACH_OXILIFE "Oxilife (green)"
#define D_NEOPOOL_MACH_BIONET "Bionet (light blue)"
#define D_NEOPOOL_MACH_HIDRONISER "Hidroniser (red)"
#define D_NEOPOOL_MACH_UVSCENIC "UVScenic (lilac)"
#define D_NEOPOOL_MACH_STATION "Station (orange)"
#define D_NEOPOOL_MACH_BRILIX "Brilix"
#define D_NEOPOOL_MACH_GENERIC "Generic"
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
#define D_NEOPOOL_MACH_HAY "Hay"
#define D_NEOPOOL_FILTRATION_MANUAL "Manual" // Filtration modes
#define D_NEOPOOL_FILTRATION_AUTO "Auto"
#define D_NEOPOOL_FILTRATION_HEATING "Heating"
#define D_NEOPOOL_FILTRATION_SMART "Smart"
#define D_NEOPOOL_FILTRATION_INTELLIGENT "Intelligent"
#define D_NEOPOOL_FILTRATION_BACKWASH "Backwash"
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
#define D_NEOPOOL_FILTRATION_SLOW "slow"
#define D_NEOPOOL_FILTRATION_MEDIUM "medium"
#define D_NEOPOOL_FILTRATION_FAST "fast"
#define D_NEOPOOL_TYPE "Type" // Sensor & relais names
#define D_NEOPOOL_REDOX "Redox"
#define D_NEOPOOL_CHLORINE "Chlorine"
#define D_NEOPOOL_CONDUCTIVITY "Conductivity"
#define D_NEOPOOL_IONIZATION "Ionization"
#define D_NEOPOOL_HYDROLYSIS "Hydrolysis"
#define D_NEOPOOL_RELAY "Relay"
#define D_NEOPOOL_RELAY_FILTRATION "Filtration"
#define D_NEOPOOL_RELAY_LIGHT "Light"
#define D_NEOPOOL_RELAY_PH_ACID "Acid pump"
#define D_NEOPOOL_RELAY_PH_BASE "Base pump"
#define D_NEOPOOL_RELAY_RX "Redox level"
#define D_NEOPOOL_RELAY_CL "Chlorine pump"
#define D_NEOPOOL_RELAY_CD "Brine pump"
#define D_NEOPOOL_TIME "Time"
#define D_NEOPOOL_FILT_MODE "Filtration"
#define D_NEOPOOL_POLARIZATION "Pol" // Sensor status
#define D_NEOPOOL_PR_OFF "PrOff"
#define D_NEOPOOL_SETPOINT_OK "Ok"
#define D_NEOPOOL_COVER "Cover"
#define D_NEOPOOL_SHOCK "Boost"
#define D_NEOPOOL_STATUS_ON "ON"
#define D_NEOPOOL_STATUS_OFF "OFF"
#define D_NEOPOOL_STATUS_WAIT "WAIT"
#define D_NEOPOOL_STATUS_TANK "TANK"
#define D_NEOPOOL_STATUS_FLOW "Flow"
#define D_NEOPOOL_LOW "Low"
#define D_NEOPOOL_FLOW1 "FL1"
#define D_NEOPOOL_FLOW2 "FL2"
#define D_NEOPOOL_PH_HIGH "too high" // ph Alarms
#define D_NEOPOOL_PH_LOW "too low"
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "pump time exceeded"
#endif // _LANGUAGE_CS_CZ_H_