Tasmota/tasmota/xnrg_07_ade7953.ino

292 lines
9.4 KiB
C++

/*
xnrg_07_ade7953.ino - ADE7953 energy sensor support for Tasmota
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_ENERGY_SENSOR
#ifdef USE_ADE7953
/*********************************************************************************************\
* ADE7953 - Energy (Shelly 2.5)
*
* Based on datasheet from https://www.analog.com/en/products/ade7953.html
*
* I2C Address: 0x38
\*********************************************************************************************/
#define XNRG_07 7
#define XI2C_07 7 // See I2CDEVICES.md
#define ADE7953_PREF 1540
#define ADE7953_UREF 26000
#define ADE7953_IREF 10000
#define ADE7953_ADDR 0x38
const uint16_t Ade7953Registers[] {
0x31B, // RMS current channel B (Relay 1)
0x313, // Active power channel B
0x311, // Apparent power channel B
0x315, // Reactive power channel B
0x31A, // RMS current channel A (Relay 2)
0x312, // Active power channel A
0x310, // Apparent power channel A
0x314, // Reactive power channel A
0x31C, // RMS voltage (Both relays)
0x10E // 16-bit unsigned period register
};
struct Ade7953 {
uint32_t voltage_rms = 0;
uint32_t period = 0;
uint32_t current_rms[2] = { 0, 0 };
uint32_t active_power[2] = { 0, 0 };
uint8_t init_step = 0;
} Ade7953;
int Ade7953RegSize(uint16_t reg)
{
int size = 0;
switch ((reg >> 8) & 0x0F) {
case 0x03:
size++;
case 0x02:
size++;
case 0x01:
size++;
case 0x00:
case 0x07:
case 0x08:
size++;
}
return size;
}
void Ade7953Write(uint16_t reg, uint32_t val)
{
int size = Ade7953RegSize(reg);
if (size) {
Wire.beginTransmission(ADE7953_ADDR);
Wire.write((reg >> 8) & 0xFF);
Wire.write(reg & 0xFF);
while (size--) {
Wire.write((val >> (8 * size)) & 0xFF); // Write data, MSB first
}
Wire.endTransmission();
delayMicroseconds(5); // Bus-free time minimum 4.7us
}
}
int32_t Ade7953Read(uint16_t reg)
{
uint32_t response = 0;
int size = Ade7953RegSize(reg);
if (size) {
Wire.beginTransmission(ADE7953_ADDR);
Wire.write((reg >> 8) & 0xFF);
Wire.write(reg & 0xFF);
Wire.endTransmission(0);
Wire.requestFrom(ADE7953_ADDR, size);
if (size <= Wire.available()) {
for (uint32_t i = 0; i < size; i++) {
response = response << 8 | Wire.read(); // receive DATA (MSB first)
}
}
}
return response;
}
void Ade7953Init(void)
{
Ade7953Write(0x102, 0x0004); // Locking the communication interface (Clear bit COMM_LOCK), Enable HPF
Ade7953Write(0x0FE, 0x00AD); // Unlock register 0x120
Ade7953Write(0x120, 0x0030); // Configure optimum setting
}
void Ade7953GetData(void)
{
int32_t reg[2][4];
for (uint32_t i = 0; i < sizeof(Ade7953Registers)/sizeof(uint16_t); i++) {
int32_t value = Ade7953Read(Ade7953Registers[i]);
if (8 == i) {
Ade7953.voltage_rms = value; // RMS voltage (Both relays)
} else if (9 == i) {
Ade7953.period = value; // period
} else {
reg[i >> 2][i &3] = value;
}
}
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: %d, %d, [%d, %d, %d, %d], [%d, %d, %d, %d]"),
Ade7953.voltage_rms, Ade7953.period,
reg[0][0], reg[0][1], reg[0][2], reg[0][3],
reg[1][0], reg[1][1], reg[1][2], reg[1][3]);
uint32_t apparent_power[2] = { 0, 0 };
uint32_t reactive_power[2] = { 0, 0 };
for (uint32_t channel = 0; channel < 2; channel++) {
Ade7953.current_rms[channel] = reg[channel][0];
if (Ade7953.current_rms[channel] < 2000) { // No load threshold (20mA)
Ade7953.current_rms[channel] = 0;
Ade7953.active_power[channel] = 0;
} else {
Ade7953.active_power[channel] = abs(reg[channel][1]);
apparent_power[channel] = abs(reg[channel][2]);
reactive_power[channel] = abs(reg[channel][3]);
}
}
uint32_t current_rms_sum = Ade7953.current_rms[0] + Ade7953.current_rms[1];
uint32_t active_power_sum = Ade7953.active_power[0] + Ade7953.active_power[1];
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("ADE: U %d, C %d, I %d + %d = %d, P %d + %d = %d"),
Ade7953.voltage_rms, Ade7953.period,
Ade7953.current_rms[0], Ade7953.current_rms[1], current_rms_sum,
Ade7953.active_power[0], Ade7953.active_power[1], active_power_sum);
if (Energy.power_on) { // Powered on
Energy.voltage[0] = (float)Ade7953.voltage_rms / Settings.energy_voltage_calibration;
Energy.frequency[0] = 223750.0f / ( (float)Ade7953.period + 1);
for (uint32_t channel = 0; channel < 2; channel++) {
Energy.data_valid[channel] = 0;
Energy.active_power[channel] = (float)Ade7953.active_power[channel] / (Settings.energy_power_calibration / 10);
Energy.reactive_power[channel] = (float)reactive_power[channel] / (Settings.energy_power_calibration / 10);
Energy.apparent_power[channel] = (float)apparent_power[channel] / (Settings.energy_power_calibration / 10);
if (0 == Energy.active_power[channel]) {
Energy.current[channel] = 0;
} else {
Energy.current[channel] = (float)Ade7953.current_rms[channel] / (Settings.energy_current_calibration * 10);
}
}
} else { // Powered off
Energy.data_valid[0] = ENERGY_WATCHDOG;
Energy.data_valid[1] = ENERGY_WATCHDOG;
}
if (active_power_sum) {
Energy.kWhtoday_delta += ((active_power_sum * (100000 / (Settings.energy_power_calibration / 10))) / 3600);
EnergyUpdateToday();
}
}
void Ade7953EnergyEverySecond(void)
{
if (Ade7953.init_step) {
if (1 == Ade7953.init_step) {
Ade7953Init();
}
Ade7953.init_step--;
} else {
Ade7953GetData();
}
}
void Ade7953DrvInit(void)
{
if (PinUsed(GPIO_ADE7953_IRQ)) { // Irq on GPIO16 is not supported...
pinMode(Pin(GPIO_ADE7953_IRQ), INPUT); // Related to resetPins() - Must be set to input
delay(100); // Need 100mS to init ADE7953
if (I2cSetDevice(ADE7953_ADDR)) {
if (HLW_PREF_PULSE == Settings.energy_power_calibration) {
Settings.energy_power_calibration = ADE7953_PREF;
Settings.energy_voltage_calibration = ADE7953_UREF;
Settings.energy_current_calibration = ADE7953_IREF;
}
I2cSetActiveFound(ADE7953_ADDR, "ADE7953");
Ade7953.init_step = 2;
Energy.phase_count = 2; // Handle two channels as two phases
Energy.voltage_common = true; // Use common voltage
Energy.frequency_common = true; // Use common frequency
TasmotaGlobal.energy_driver = XNRG_07;
}
}
}
bool Ade7953Command(void)
{
bool serviced = true;
uint32_t channel = (2 == XdrvMailbox.index) ? 1 : 0;
uint32_t value = (uint32_t)(CharToFloat(XdrvMailbox.data) * 100); // 1.23 = 123
if (CMND_POWERCAL == Energy.command_code) {
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_PREF; }
// Service in xdrv_03_energy.ino
}
else if (CMND_VOLTAGECAL == Energy.command_code) {
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_UREF; }
// Service in xdrv_03_energy.ino
}
else if (CMND_CURRENTCAL == Energy.command_code) {
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_IREF; }
// Service in xdrv_03_energy.ino
}
else if (CMND_POWERSET == Energy.command_code) {
if (XdrvMailbox.data_len && Ade7953.active_power[channel]) {
if ((value > 100) && (value < 200000)) { // Between 1W and 2000W
Settings.energy_power_calibration = (Ade7953.active_power[channel] * 1000) / value; // 0.00 W
}
}
}
else if (CMND_VOLTAGESET == Energy.command_code) {
if (XdrvMailbox.data_len && Ade7953.voltage_rms) {
if ((value > 10000) && (value < 26000)) { // Between 100V and 260V
Settings.energy_voltage_calibration = (Ade7953.voltage_rms * 100) / value; // 0.00 V
}
}
}
else if (CMND_CURRENTSET == Energy.command_code) {
if (XdrvMailbox.data_len && Ade7953.current_rms[channel]) {
if ((value > 2000) && (value < 1000000)) { // Between 20mA and 10A
Settings.energy_current_calibration = ((Ade7953.current_rms[channel] * 100) / value) * 100; // 0.00 mA
}
}
}
else serviced = false; // Unknown command
return serviced;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xnrg07(uint8_t function)
{
if (!I2cEnabled(XI2C_07)) { return false; }
bool result = false;
switch (function) {
case FUNC_ENERGY_EVERY_SECOND:
Ade7953EnergyEverySecond();
break;
case FUNC_COMMAND:
result = Ade7953Command();
break;
case FUNC_PRE_INIT:
Ade7953DrvInit();
break;
}
return result;
}
#endif // USE_ADE7953
#endif // USE_ENERGY_SENSOR
#endif // USE_I2C