Tasmota/tasmota/xnrg_16_iem3000.ino

209 lines
6.4 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
xnrg_16_iem3000.ino - Schneider Electric iEM3000 series Modbus energy meter support for Tasmota
Copyright (C) 2020 Marius Bezuidenhout
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ENERGY_SENSOR
#ifdef USE_IEM3000
/*********************************************************************************************\
* Schneider Electric iEM3000 series Modbus energy meter
* iEM3150 / iEM3155 / iEM3250 / iEM3255 / iEM3350 / iEM3355 / iEM3455 / iEM3555
* Important! Set meter Commnication -> Parity to None
\*********************************************************************************************/
#define XNRG_16 16
// can be user defined in my_user_config.h
#ifndef IEM3000_SPEED
#define IEM3000_SPEED 19200 // default IEM3000 Modbus address
#endif
// can be user defined in my_user_config.h
#ifndef IEM3000_ADDR
#define IEM3000_ADDR 1 // default IEM3000 Modbus address
#endif
#include <TasmotaModbus.h>
TasmotaModbus *Iem3000Modbus;
const uint16_t Iem3000_start_addresses[] {
// ID (reg count/datatype) [unit] Description
0x0bb7, // 0 . IEM3000_I1_CURRENT (2/Float32) [A] I1: phase 1 current
0x0bb9, // 1 . IEM3000_I2_CURRENT (2/Float32) [A] I2: phase 2 current
0x0bbb, // 2 . IEM3000_I3_CURRENT (2/Float32) [A] I3: phase 3 current
0x0bd3, // 3 . IEM3000_L1_VOLTAGE (2/Float32) [V] Voltage L1N
0x0bd5, // 4 . IEM3000_L2_VOLTAGE (2/Float32) [V] Voltage L2N
0x0bd7, // 5 . IEM3000_L3_VOLTAGE (2/Float32) [V] Voltage L3N
0x0bed, // 6 . IEM3000_P1_POWER (2/Float32) [KW] Active Power Phase 1
0x0bef, // 7 . IEM3000_P2_POWER (2/Float32) [KW] Active Power Phase 2
0x0bf1, // 8 . IEM3000_P3_POWER (2/Float32) [KW] Active Power Phase 3
0x0c25, // 9 . IEM3000_FREQUENCY (2/Float32) [Hz] Frequency
0xb02b, // 10 . IEM3000_TOTAL_ACTIVE (4/Int64) [Wh] Total Active Energy Import
};
struct IEM3000 {
uint8_t read_state = 0;
uint8_t send_retry = 0;
} Iem3000;
/*********************************************************************************************/
void IEM3000Every250ms(void)
{
bool data_ready = Iem3000Modbus->ReceiveReady();
uint8_t reg_count = 4;
if (Iem3000.read_state < 10) {
reg_count = 2;
}
if (data_ready) {
uint8_t buffer[14]; // At least 5 + sizeof(int64_t) = 13
uint32_t error = Iem3000Modbus->ReceiveBuffer(buffer, reg_count);
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, buffer, Iem3000Modbus->ReceiveCount());
if (error) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("SDM: Iem3000 error %d"), error);
} else {
Energy.data_valid[0] = 0;
// 0 1 2 3 4 5 6 7 8
// SA FC BC Fh Fl Sh Sl Cl Ch
// 01 04 04 43 66 33 34 1B 38 = 230.2 Volt
float value;
int64_t value64;
if(Iem3000.read_state >= 0 && Iem3000.read_state < 10) {
((uint8_t*)&value)[3] = buffer[3]; // Get float values
((uint8_t*)&value)[2] = buffer[4];
((uint8_t*)&value)[1] = buffer[5];
((uint8_t*)&value)[0] = buffer[6];
} else {
((uint8_t*)&value64)[7] = buffer[3]; // Get int values
((uint8_t*)&value64)[6] = buffer[4];
((uint8_t*)&value64)[5] = buffer[5];
((uint8_t*)&value64)[4] = buffer[6];
((uint8_t*)&value64)[3] = buffer[7];
((uint8_t*)&value64)[2] = buffer[8];
((uint8_t*)&value64)[1] = buffer[9];
((uint8_t*)&value64)[0] = buffer[10];
}
switch(Iem3000.read_state) {
case 0:
Energy.current[0] = value;
break;
case 1:
Energy.current[1] = value;
break;
case 2:
Energy.current[2] = value;
break;
case 3:
Energy.voltage[0] = value;
break;
case 4:
Energy.voltage[1] = value;
break;
case 5:
Energy.voltage[2] = value;
break;
case 6:
Energy.active_power[0] = value;
break;
case 7:
Energy.active_power[1] = value;
break;
case 8:
Energy.active_power[2] = value;
break;
case 9:
Energy.frequency[0] = value;
break;
case 10:
EnergyUpdateTotal(value64 * 0.001f, true); // 1125 => 1.125
break;
}
Iem3000.read_state++;
if (sizeof(Iem3000_start_addresses)/2 == Iem3000.read_state) {
Iem3000.read_state = 0;
}
}
} // end data ready
if (0 == Iem3000.send_retry || data_ready) {
Iem3000.send_retry = 5;
Iem3000Modbus->Send(IEM3000_ADDR, 0x03, Iem3000_start_addresses[Iem3000.read_state], reg_count);
} else {
Iem3000.send_retry--;
}
}
void Iem3000SnsInit(void)
{
Iem3000Modbus = new TasmotaModbus(Pin(GPIO_IEM3000_RX), Pin(GPIO_IEM3000_TX));
uint8_t result = Iem3000Modbus->Begin(IEM3000_SPEED);
if (result) {
if (2 == result) { ClaimSerial(); }
Energy.phase_count = 3;
Energy.frequency_common = true; // Use common frequency
} else {
TasmotaGlobal.energy_driver = ENERGY_NONE;
}
}
void Iem3000DrvInit(void)
{
if (PinUsed(GPIO_IEM3000_RX) && PinUsed(GPIO_IEM3000_TX)) {
TasmotaGlobal.energy_driver = XNRG_16;
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xnrg16(uint8_t function)
{
bool result = false;
switch (function) {
case FUNC_EVERY_250_MSECOND:
IEM3000Every250ms();
break;
case FUNC_INIT:
Iem3000SnsInit();
break;
case FUNC_PRE_INIT:
Iem3000DrvInit();
break;
}
return result;
}
#endif // USE_IEM3000
#endif // USE_ENERGY_SENSOR