mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xdrv_86_esp32_sonoff_spm.ino

2307 lines
102 KiB
C++
Raw Blame History

/*
xdrv_86_esp32_sonoff_spm.ino - Sonoff SPM support for Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
//#define USE_SONOFF_SPM
#ifdef ESP32
#ifdef USE_ENERGY_SENSOR
#ifdef USE_SONOFF_SPM
/*********************************************************************************************\
* Sonoff Stackable Power Manager
*
* {"NAME":"Sonoff SPM","GPIO":[0,0,0,0,3200,5536,0,0,672,704,736,0,3232,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,544,0,0,32,0,0,0,0],"FLAG":0,"BASE":1}
*
* Things to know:
* Bulk of the action is handled by ARM processors present in every unit communicating over modbus RS-485.
* Each SPM-4Relay has 4 bistable relays with their own CSE7761 energy monitoring device handled by an ARM processor.
* Green led is controlled by ARM processor indicating SD-Card access.
* ESP32 is used as interface between eWelink and ARM processor in SPM-Main unit communicating over proprietary serial protocol.
* Power on sequence for two SPM-4Relay modules is 00-00-15-10-(0F)-(13)-(13)-(19)-0C-09-04-09-04-0B-0B
* Up to 180 days of daily energy are stored on the SD-Card. Previous data is lost.
* Tasmota support is based on Sonoff SPM v1.0.0 ARM firmware.
* Energy history cannot be guaranteed using either SD-Card or internal flash. As a solution Tasmota stores the total energy and yesterday energy just after midnight.
*
* Tasmota features:
* - Up to 8 SPM-4Relay units supporting a total of 32 relays.
* - Button on SPM-Main initiates re-scan of SPM-4Relay units.
* - SPI master to ARM (ARM firmware upload from ESP using EasyFlash not supported).
* - Ethernet support.
* - Gui rotating energy display for 4 relays at a time.
* - Gui optimized for energy display.
* - Blue led equals Tasmota WiFi status.
* - Yellow led lights if no ARM connection can be made.
* - Yellow led blinks 2 seconds if an ARM-ESP comms CRC error is detected.
* - Persistence for module mapping, total energy and energy yesterday
* - Supported commands:
* SspmDisplay 0|1 - Select alternative GUI rotating display either all (0) or powered on only (1)
* SspmDump 0|1 - Select shortenend (0) or full (1) serial receive buffer dumps
* SspmEnergyTotal<relay> - (p)reset total energy without today's energy
* SspmEnergyYesterday<relay> - (p)reset energy yesterday
* SspmHistory<relay> - Retrieve daily energy of last six month (as defined by ARM firmware)
* SspmIAmHere<relay> - Blink ERROR in SPM-4Relay where relay resides
* SspmLog<relay> [x] - Retrieve relay power state change and cause logging
* SspmMap 0 - Start a scan to fill default mapping
* SspmMap 2,3,1,.. - Map scanned module number to physical module number using positional numbering
* SspmOverload<relay> 0 - Set default overload detection parameters as read from module during initial scan
* SspmOverload<relay> <delay>,<min_power>,<max_power>,<min_voltage>,<max_voltage,<max_current>
* SspmOverload<relay> 0,0.10,4400.00,0.10,240.00,20.00 - Set default values using comma separated options
* SspmOverload<relay> 0 0.10 4400.00 0.10 240.00 20.00 - Set default values using space separated options
* SspmOverload<relay> 10,12.3 - Enable overload detection after 10 seconds for MinPower
* SspmOverload<relay> 10,0,22.2 - Enable overload detection after 10 seconds for MaxPower
* SspmOverload<relay> 10,0,0,0,235.2 - Enable overload detection after 10 seconds for MaxVoltage
* SspmScan - Rescan ARM modbus taking around 20 seconds
* SspmReset 1 - Reset ARM and restart ESP
*
* Todo:
* Gui for Overload Protection entry (is handled by ARM processor).
* Gui for Scheduling entry (is handled by ARM processor).
*
* Nice to have:
* Support for all 32 SPM-4Relay units equals 128 relays (restricted due to internal Tasmota register use)
*
* GPIO's used:
* GPIO00 - Bootmode / serial flash
* GPIO01 - Serial console TX (921600bps8N1 originally)
* GPIO03 - Serial console RX
* GPIO04 - ARM processor TX (115200bps8N1)
* GPIO05 - ETH POWER
* GPIO12 - SPI MISO to MOSI ARM output (pin36 - PB15)
* GPIO13 - SPI MOSI to MISO ARM input (pin35 - PB14)
* GPIO14 - SPI SCLK to ARM input (ARM pin34 - PB13)
* GPIO15 - ARM reset (output) - 18ms low active 125ms after restart esp32
* GPIO16 - ARM processor RX
* GPIO17 - EMAC_CLK_OUT_180
* GPIO18 - ETH MDIO
* GPIO19 - EMAC_TXD0(RMII)
* GPIO21 - EMAC_TX_EN(RMII)
* GPIO22 - EMAC_TXD1(RMII)
* GPIO23 - ETH MDC
* GPIO25 - EMAC_RXD0(RMII)
* GPIO26 - EMAC_RXD1(RMII)
* GPIO27 - EMAC_RX_CRS_DV
* GPIO32 - Blue status led2
* GPIO33 - Yellow error led3
* GPIO35 - Button
* #define ETH_TYPE ETH_PHY_LAN8720
* #define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
* #define ETH_ADDRESS 0
*
* Variables used:
* module = 0 to 31 SPM-4Relays
* channel = 0 to 3 or 01, 02, 04, 08 Bitmask of four relays in module
* relay = 0 to 127 Relays
\*********************************************************************************************/
#ifndef SSPM_JSON_ENERGY_TODAY
#define SSPM_JSON_ENERGY_TODAY // Show JSON energy today
#endif
#ifndef SSPM_JSON_ENERGY_YESTERDAY
#define SSPM_JSON_ENERGY_YESTERDAY // Show JSON energy yesterday
#endif
/*********************************************************************************************\
* Fixed defines - Do not change
\*********************************************************************************************/
#define XDRV_86 86
#define SSPM_MAX_MODULES 8 // Currently supports up to 8 SPM-4RELAY units for a total of 32 relays restricted by 32-bit power_t size
#define SSPM_SERIAL_BUFFER_SIZE 512 // Needs to accomodate Energy total history for 180 days (408 bytes)
//#define SSPM_SIMULATE 2 // Simulate additional 4Relay modules based on first detected 4Relay module (debugging purposes only!!)
// From ESP to ARM
#define SSPM_FUNC_FIND 0 // 0x00
#define SSPM_FUNC_SET_OPS 3 // 0x03 - Overload Protection
#define SSPM_FUNC_GET_OPS 4 // 0x04
#define SSPM_FUNC_SET_RELAY 8 // 0x08
#define SSPM_FUNC_GET_MODULE_STATE 9 // 0x09 - State of four channels
#define SSPM_FUNC_SET_SCHEME 10 // 0x0A
#define SSPM_FUNC_GET_SCHEME 11 // 0x0B
#define SSPM_FUNC_SET_TIME 12 // 0x0C
#define SSPM_FUNC_IAMHERE 13 // 0x0D
#define SSPM_FUNC_INIT_SCAN 16 // 0x10
#define SSPM_FUNC_UNITS 21 // 0x15
#define SSPM_FUNC_GET_ENERGY_TOTAL 22 // 0x16
#define SSPM_FUNC_GET_ENERGY 24 // 0x18
#define SSPM_FUNC_GET_LOG 26 // 0x1A
#define SSPM_FUNC_ENERGY_PERIOD 27 // 0x1B
#define SSPM_FUNC_RESET 28 // 0x1C - Remove device from eWelink and factory reset
// From ARM to ESP
#define SSPM_FUNC_ENERGY_RESULT 6 // 0x06
#define SSPM_FUNC_KEY_PRESS 7 // 0x07
#define SSPM_FUNC_SCAN_START 15 // 0x0F
#define SSPM_FUNC_SCAN_RESULT 19 // 0x13
#define SSPM_FUNC_SCAN_DONE 25 // 0x19
// Unknown
#define SSPM_FUNC_01
#define SSPM_FUNC_02
#define SSPM_FUNC_05
#define SSPM_FUNC_14
#define SSPM_FUNC_17
#define SSPM_FUNC_18
#define SSPM_FUNC_20
#define SSPM_FUNC_23
#define SSPM_GPIO_ARM_RESET 15
#define SSPM_GPIO_LED_ERROR 33
#define SSPM_MODULE_NAME_SIZE 12
/*********************************************************************************************/
#define SSPM_TOTAL_MODULES 32 // Max number of SPM-4RELAY units for a total of 128 relays
const uint32_t SSPM_VERSION = 0x0104; // Latest driver version (See settings deltas below)
enum SspmMachineStates { SPM_NONE, // Do nothing
SPM_WAIT, // Wait 100ms
SPM_RESET, // Toggle ARM reset pin
SPM_POLL_ARM, // Wait for first acknowledge from ARM after reset
SPM_POLL_ARM_SPI, // Wait for first acknowledge from ARM SPI after reset
SPM_POLL_ARM_2, // Wait for second acknowledge from ARM after reset
SPM_POLL_ARM_3, // Wait for second acknowledge from ARM after reset
SPM_SEND_FUNC_UNITS, // Get number of units
SPM_START_SCAN, // Start module scan sequence
SPM_WAIT_FOR_SCAN, // Wait for scan sequence to complete
SPM_SCAN_COMPLETE, // Scan complete
SPM_STALL_MIDNIGHT, // Stall energy totals around midnight
SPM_GET_ENERGY_TOTALS, // Init available Energy totals registers
SPM_UPDATE_CHANNELS // Update Energy for powered on channels
};
const char kSSPMTriggers[] PROGMEM = "Tasmota|Device|Overload|Overtemp";
const char kSSPMOverload[] PROGMEM = "Tbd1|Voltage|Current|Power|Tbd2|Tbd3|Tbd4";
#include <TasmotaSerial.h>
TasmotaSerial *SspmSerial;
typedef union {
uint16_t data;
struct {
uint16_t dump : 1; // bit 0 (v10.1.0.6) - SSPMDump - Short receive dump (0) or full receive dump (1)
uint16_t display : 1; // bit 1 (v10.1.0.6) - SSPMDisplay - GUI display all relays (0) or only powered on relays (1)
uint16_t spare02 : 1; // bit 2
uint16_t spare03 : 1; // bit 3
uint16_t spare04 : 1; // bit 4
uint16_t spare05 : 1; // bit 5
uint16_t spare06 : 1; // bit 6
uint16_t spare07 : 1; // bit 7
uint16_t spare08 : 1; // bit 8 (This bit is default 1 due to legacy use)
uint16_t spare09 : 1; // bit 9
uint16_t spare10 : 1; // bit 10
uint16_t spare11 : 1; // bit 11
uint16_t spare12 : 1; // bit 12
uint16_t spare13 : 1; // bit 13
uint16_t spare14 : 1; // bit 14
uint16_t spare15 : 1; // bit 15
};
} SSPMSOBitfield;
typedef struct {
uint32_t crc32; // To detect file changes
uint16_t version; // To detect driver function changes
SSPMSOBitfield flag;
uint16_t module_map[SSPM_TOTAL_MODULES]; // Max possible SPM relay modules
float energy_total[SSPM_TOTAL_MODULES][4]; // Total energy in kWh - float allows up to 262143.99 kWh
float energy_yesterday[SSPM_TOTAL_MODULES][4]; // Energy yesterday in kWh - float allows up to 262143.99 kWh
} tSspmSettings;
typedef struct {
tSspmSettings Settings;
float voltage[SSPM_MAX_MODULES][4]; // 123.12 V
float current[SSPM_MAX_MODULES][4]; // 123.12 A
float active_power[SSPM_MAX_MODULES][4]; // 123.12 W
float apparent_power[SSPM_MAX_MODULES][4]; // 123.12 VA
float reactive_power[SSPM_MAX_MODULES][4]; // 123.12 VAr
float power_factor[SSPM_MAX_MODULES][4]; // 0.12
float energy_today[SSPM_MAX_MODULES][4]; // 12345 kWh
float energy_total[SSPM_MAX_MODULES][4]; // 12345 kWh total energy since last 6 month!!!
float min_power;
float max_power;
float min_voltage;
float max_voltage;
float min_current;
float max_current;
float overload_min_power;
float overload_max_power;
float overload_min_voltage;
float overload_max_voltage;
float overload_max_current;
uint32_t timeout;
power_t old_power;
power_t power_on_state;
uint16_t last_totals;
uint16_t serial_in_byte_counter;
uint16_t expected_bytes;
uint8_t module[SSPM_MAX_MODULES][SSPM_MODULE_NAME_SIZE];
uint8_t history_day[SSPM_MAX_MODULES][4];
#ifdef SSPM_SIMULATE
uint8_t simulate;
uint8_t simulated_module;
#endif
uint8_t allow_updates;
uint8_t get_energy_relay;
uint8_t get_totals;
uint8_t rotate;
uint8_t module_max;
uint8_t module_selected;
uint8_t no_send_key;
uint8_t counter;
uint8_t command_sequence;
uint8_t mstate;
uint8_t last_button;
uint8_t error_led_blinks;
uint8_t overload_relay;
uint8_t overload_delay;
uint8_t overload_enable;
uint8_t history_relay;
uint8_t log_relay;
bool map_change;
bool discovery_triggered;
} TSspm;
uint8_t *SspmBuffer = nullptr;
TSspm *Sspm = nullptr;
/*********************************************************************************************\
* Driver Settings load and save using filesystem
\*********************************************************************************************/
uint32_t SSPMSettingsCrc32(void) {
// Use Tasmota CRC calculation function
return GetCfgCrc32((uint8_t*)&Sspm->Settings +4, sizeof(tSspmSettings) -4); // Skip crc32
}
void SSPMSettingsDefault(void) {
// Init default values in case file is not found
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM " D_USE_DEFAULTS));
memset(&Sspm->Settings, 0x00, sizeof(tSspmSettings));
Sspm->Settings.version = SSPM_VERSION;
// Init any other parameter in struct SSPMSettings
}
void SSPMSettingsDelta(void) {
// Fix possible setting deltas
if (Sspm->Settings.version != SSPM_VERSION) { // Fix version dependent changes
if (Sspm->Settings.version < 0x0104) {
Sspm->Settings.flag.display = Settings->sbflag1.sspm_display;
}
// Set current version and save settings
Sspm->Settings.version = SSPM_VERSION;
SSPMSettingsSave();
}
}
void SSPMSettingsLoad(void) {
// Init default values in case file is not found
SSPMSettingsDefault();
// Try to load file /.drvset086
char filename[20];
// Use for drivers:
snprintf_P(filename, sizeof(filename), PSTR(TASM_FILE_DRIVER), XDRV_86);
#ifdef USE_UFILESYS
if (TfsLoadFile(filename, (uint8_t*)&Sspm->Settings, sizeof(tSspmSettings))) {
// Fix possible setting deltas
SSPMSettingsDelta();
AddLog(LOG_LEVEL_INFO, PSTR("CFG: SPM loaded from file"));
} else {
// File system not ready: No flash space reserved for file system
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM ERROR File system not ready or file not found"));
}
#else
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM ERROR File system not enabled"));
#endif // USE_UFILESYS
}
void SSPMSettingsSave(void) {
// Called from FUNC_SAVE_SETTINGS every SaveData second and at restart
if (SSPMSettingsCrc32() != Sspm->Settings.crc32) {
// Try to save file /.drvset086
Sspm->Settings.crc32 = SSPMSettingsCrc32();
char filename[20];
// Use for drivers:
snprintf_P(filename, sizeof(filename), PSTR(TASM_FILE_DRIVER), XDRV_86);
#ifdef USE_UFILESYS
if (TfsSaveFile(filename, (const uint8_t*)&Sspm->Settings, sizeof(tSspmSettings))) {
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM saved to file"));
} else {
// File system not ready: No flash space reserved for file system
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM ERROR File system not ready or unable to save file"));
}
#else
AddLog(LOG_LEVEL_DEBUG, PSTR("CFG: SPM ERROR File system not enabled"));
#endif // USE_UFILESYS
}
}
/*********************************************************************************************/
uint32_t SSMPGetModuleId(uint32_t module) {
// Return short module id
// input number
// output two_byte value
uint32_t module_id = 0;
if (module < Sspm->module_max) {
module_id = Sspm->module[module][0] << 8 | Sspm->module[module][1];
}
return module_id; // 0 if not found, else first two bytes of module_id
}
int SSPMGetMappedModuleIdIfFound(uint32_t module) {
// Return mapped module number
// input number
// output number
for (uint32_t module_nr = 0; module_nr < Sspm->module_max; module_nr++) {
if (Sspm->Settings.module_map[module] == SSMPGetModuleId(module_nr)) {
return module_nr; // 0, 1, ..
}
}
return -1; // -1 if not found
}
uint32_t SSPMGetMappedModuleId(uint32_t module) {
// Return mapped module number
// input number
// output number
int module_nr = SSPMGetMappedModuleIdIfFound(module);
if (-1 == module_nr) {
module_nr = module; // input module number if not found used as fallback
}
#ifdef SSPM_SIMULATE
Sspm->simulated_module = module_nr;
if (Sspm->simulate && (module_nr > 0) && (module_nr <= Sspm->simulate)) {
module_nr = 0; // Emulate modules by 0
}
#endif
return (uint32_t)module_nr; // 0, 1, ...
}
int SSPMGetModuleNumberFromMapIfFound(uint32_t id) {
// Return module number based on first two bytes of module id
// input two-byte value
// output number
for (uint32_t module_nr = 0; module_nr < SSPM_MAX_MODULES; module_nr++) {
if (id == Sspm->Settings.module_map[module_nr]) {
return module_nr; // 0, 1, ...
}
}
return -1; // -1 if not found
}
uint32_t SSPMGetModuleNumberFromMap(uint32_t id) {
// Return module number based on first two bytes of module id
// input two-byte value
// output number
int module_nr = SSPMGetModuleNumberFromMapIfFound(id);
if (-1 == module_nr) {
module_nr = 0; // 0 if not found used as fallback
}
return (uint32_t)module_nr; // 0, 1, ...
}
/*********************************************************************************************/
void SSPMSetLock(uint32_t seconds) {
Sspm->timeout = seconds * 10; // Decremented every 100mSec
Sspm->allow_updates = 0; // Disable requests from 100mSec loop
}
uint16_t SSPMCalculateCRC(uint8_t *frame, uint32_t num) {
// CRC-16/ARC (polynomial 0x8005 reflected as 0xA001)
uint16_t crc = 0;
for (uint32_t i = 2; i < num; i++) {
crc ^= frame[i];
for (uint32_t i = 0; i < 8; i++) {
crc = (crc & 1) ? (crc >> 1) ^ 0xA001 : crc >> 1;
}
}
return crc ^ 0;
}
float SSPMGetValue(uint8_t *buffer) {
// return float from three bytes in buffer
float value = (buffer[0] << 8) + buffer[1] + (float)buffer[2] / 100;
return value;
}
void SSPMSetValue(uint8_t *buffer, float value) {
// Store float in three bytes
uint32_t integer = value;
buffer[0] = integer >> 8;
buffer[1] = integer;
buffer[2] = (value * 100) - (integer * 100); // Fraction
}
/*********************************************************************************************/
void SSPMSend(uint32_t size) {
uint16_t crc = SSPMCalculateCRC(SspmBuffer, size -2);
SspmBuffer[size -2] = (uint8_t)(crc >> 8);
SspmBuffer[size -1] = (uint8_t)crc;
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: ESP %*_H"), size, SspmBuffer);
SspmSerial->write(SspmBuffer, size);
}
void SSPMSendAck(uint32_t command_sequence) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 0f 00 01 00 01 3d e6
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
*/
SspmBuffer[15] = 0x80;
SspmBuffer[17] = 0x00;
SspmBuffer[18] = 0x01;
SspmBuffer[19] = 0x00;
SspmBuffer[20] = command_sequence;
SSPMSend(23);
}
void SSPMInitSend(void) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Marker |Module id |Ac|Cm|Size |
*/
memset(SspmBuffer, 0, 19);
SspmBuffer[0] = 0xAA;
SspmBuffer[1] = 0x55;
SspmBuffer[2] = 0x01;
}
void SSPMSendCmnd(uint32_t command) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 51
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
*/
SSPMInitSend();
SspmBuffer[16] = command;
if (0 == command) {
Sspm->command_sequence = 0;
} else {
Sspm->command_sequence++;
}
SspmBuffer[19] = Sspm->command_sequence;
SSPMSend(22);
}
/*********************************************************************************************/
void SSPMSendOPS(uint32_t relay) {
/*
Overload Protection
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 03 00 12 04 00 11 30 00 00 00 0a 00 f0 00 00 00 0a 00 14 00 00 fb a6 f8 = Default settings
Marker |Module id |Ac|Cm|Size |Ch|Ra|Max P |Min P |Max U |Min U |Max I |De|Ix|Chksm|
| | | 4400W| 0.1W| 240V| 0.1V| 20A| |
Ch - Bitmask channel 01 = 1, 02 = 2, 04 = 3, 08 = 4
Ra - Bitmask enabled features xxxxxxx1 Enable Max current
Ra - Bitmask enabled features xxxxxx1x Enable Min voltage
Ra - Bitmask enabled features xxxxx1xx Enable Max voltage
Ra - Bitmask enabled features xxxx1xxx Enable Min power
Ra - Bitmask enabled features xxx1xxxx Enable Max power
De - 0 to 255 seconds Overload detection delay
Values are XX XX - number
XX - decimals
aa 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 03 00 12 02 10 00 14 00 00 00 0a 00 f0 00 00 00 0a 00 14 00 14 46 7b 80 - L2, 20 seconds, MaxPower 20W
Acknowledge:
aa 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 03 00 01 00 46 75 1d
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 03 00 01 00 14 08 bc
|Ac|Cm|Size |Rt|Ix|Chksm|
Ac - Acknowledge or error number
Rt - Return code
*/
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
uint8_t channel = 1 << (relay & 0x03); // Channel relays are bit masked
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_SET_OPS; // 0x03
SspmBuffer[18] = 0x12;
SspmBuffer[19] = channel;
SspmBuffer[20] = Sspm->overload_enable;
SSPMSetValue(&SspmBuffer[21], Sspm->overload_max_power);
SSPMSetValue(&SspmBuffer[24], Sspm->overload_min_power);
SSPMSetValue(&SspmBuffer[27], Sspm->overload_max_voltage);
SSPMSetValue(&SspmBuffer[30], Sspm->overload_min_voltage);
SSPMSetValue(&SspmBuffer[33], Sspm->overload_max_current);
SspmBuffer[36] = Sspm->overload_delay;
Sspm->command_sequence++;
SspmBuffer[37] = Sspm->command_sequence;
SSPMSend(40);
}
void SSPMSendGetOps(uint32_t module) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
aa 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 04 00 00 08 c0 0a
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
*/
if (module >= Sspm->module_max) { return; }
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_GET_OPS; // 0x04
Sspm->command_sequence++;
SspmBuffer[19] = Sspm->command_sequence;
SSPMSend(22);
}
void SSPMSendSetRelay(uint32_t relay, uint32_t state) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 08 00 01 44 08 c0 34
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
*/
uint8_t channel = 1 << (relay & 0x03); // Channel relays are bit masked
if (state) {
channel |= (channel << 4);
}
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_SET_RELAY; // 0x08
SspmBuffer[18] = 0x01;
SspmBuffer[19] = channel;
Sspm->command_sequence++;
SspmBuffer[20] = Sspm->command_sequence;
SSPMSend(23);
}
void SSPMSendGetModuleState(uint32_t module) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 09 00 01 0f 05 b5 de
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
*/
if (module >= Sspm->module_max) { return; }
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_GET_MODULE_STATE; // 0x09
SspmBuffer[18] = 0x01;
SspmBuffer[19] = 0x0F; // State of all four relays
Sspm->command_sequence++;
SspmBuffer[20] = Sspm->command_sequence;
SSPMSend(23);
}
void SSPMSendScheme(uint32_t relay) {
/*
Time scheme
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
One time
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 1e 01 01 01 07 e5 0b 0e 0b 38 08 00 6b 01 00 ea 60 20 23 1b 04 fd 7a 83 05 63 ee dd a9 b9 3a 7e 14 95
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 1e 01 01 01 07 e5 0b 0e 0c 04 35 00 55 01 02 46 76 0e 0c 20 e1 22 7c 67 ab 9c 66 73 6d bd e8 7f 50 d4
Marker |Module id |Ac|Cm|Size |No| |Mo| YYYY|MM|DD|HH|MM |St|Re|Scheme id |
No - Number of schemes defined
Mo - Scheme type (1 = temporarly, 2 = scheduled)
Re - Relay 0 to 3
St - State (0 = off, 1 = On)
Scheduled On
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 15 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 80 5b 48
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 15 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 82 9a c9
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0c 0c 01 03 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 83 44 aa
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 84 e0 22
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 86 e3 fa
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 2f 02 01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a
01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 87 e8 02
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 2f 02 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24
01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 89 6e e6
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 4c 03 01 01 07 e5 0b 0e 0e 0e 26 00 e7 01 00 e6 b2 48 8e ef be ce 78 3e 5d a8 3a c0 c5 6f 5e = One time
01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 = 14:11 OFF CH3 SuMoThSa
01 02 0e 0d 3b 01 03 84 fb ea 35 ca 16 51 b5 b8 10 a1 1c d0 1a 3f 7a 8a 2f f8 = 14:59 ON CH4 MoTuWe
Marker |Module id |Ac|Cm|Size |No| |Mo|Dy|HH|MM|St|Re|Scheme id |
Dy - Bitmask days xxxxxxx1 sunday
xxxxxx1x monday
xxxxx1xx tuesday
xxxx1xxx wednesday
xxx1xxxx thursday
xx1xxxxx friday
x1xxxxxx saturday
Scheduled Off
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 01 00 81 26 9f
Schedule 2 off
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0a 00 18 01 01 02 53 0d 0b 00 02 99 65 93 dc f8 d0 b0 29 a8 66 ba 8f 41 66 29 24 88 e5 22
Marker |Module id |Ac|Cm|Size |
*/
SspmBuffer[16] = SSPM_FUNC_SET_SCHEME; // 0x0A
}
void SSPMSendGetScheme(uint32_t module) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 0b 00 00 09 14 c8
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
*/
if (module >= Sspm->module_max) { return; }
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_GET_SCHEME; // 0x0B
Sspm->command_sequence++;
SspmBuffer[19] = Sspm->command_sequence;
SSPMSend(22);
}
void SSPMSendSetTime(void) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 0b 07 e5 0b 06 0c 39 01 00 00 02 00 04 8a 37
Marker |Module id |Ac|Cm|Size |YY YY MM DD HH MM SS|Ln|St|Tzone|Ix|Chksm|
UTC time
Tzone = Time zone, [-12,+14], can be a decimal, such as 7.5
*/
SSPMInitSend();
SspmBuffer[16] = SSPM_FUNC_SET_TIME; // 0x0C
SspmBuffer[18] = 0x0B;
TIME_T time;
BreakTime(Rtc.utc_time, time);
uint16_t year = time.year + 1970;
SspmBuffer[19] = year >> 8;
SspmBuffer[20] = year;
SspmBuffer[21] = time.month;
SspmBuffer[22] = time.day_of_month;
SspmBuffer[23] = time.hour;
SspmBuffer[24] = time.minute;
SspmBuffer[25] = time.second;
SspmBuffer[26] = 0;
SspmBuffer[27] = 0;
SspmBuffer[28] = Rtc.time_timezone / 60;
// SspmBuffer[28] = (Rtc.time_timezone / 60) +1; // possibly itead bug
SspmBuffer[29] = abs(Rtc.time_timezone % 60);
Sspm->command_sequence++;
SspmBuffer[30] = Sspm->command_sequence;
SSPMSend(33);
}
void SSPMSendIAmHere(uint32_t relay) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 00 0d 00 00 17 35 b6
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
Response is blink green COMM led on SPM-4Relay
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 0d 00 01 00 17 48 b5
Marker |Module id |Ac|Cm|Size |Rs|Ix|Chksm|
Rs = Return state
*/
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
SSPMInitSend();
memcpy(SspmBuffer +3, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[16] = SSPM_FUNC_IAMHERE; // 0x0D
Sspm->command_sequence++;
SspmBuffer[19] = Sspm->command_sequence;
SSPMSend(22);
}
void SSPMSendInitScan(void) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 00 10 00 00 02 cd f0
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
Acknowledge:
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 80 10 00 01 00 02 e5 03
|Ac|Cm|Size |Rt|Ix|Chksm|
*/
SSPMSetLock(30); // Disable requests from 100mSec loop
memset(SspmBuffer, 0xFF, 15);
SspmBuffer[0] = 0xAA;
SspmBuffer[1] = 0x55;
SspmBuffer[2] = 0x01;
SspmBuffer[15] = 0;
SspmBuffer[16] = SSPM_FUNC_INIT_SCAN; // 0x10
SspmBuffer[17] = 0;
SspmBuffer[18] = 0;
Sspm->command_sequence++;
SspmBuffer[19] = Sspm->command_sequence;
SSPMSend(22);
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Start relay scan..."));
}
void SSPMSendGetEnergyTotal(uint32_t relay) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 0d 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 14 e6 93
Marker | | |Cm|Size |Module id |Ch|Ix|Chksm|
*/
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
uint8_t channel = relay & 0x03; // Channel relays are NOT bit masked this time
SSPMInitSend();
SspmBuffer[16] = SSPM_FUNC_GET_ENERGY_TOTAL; // 0x16
SspmBuffer[18] = 0x0D;
memcpy(SspmBuffer +19, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[31] = channel;
Sspm->command_sequence++;
SspmBuffer[32] = Sspm->command_sequence;
SSPMSend(35);
}
void SSPMSendGetEnergy(uint32_t relay) {
/*
relay_num = 1..8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 10 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 01 00 3c 2a db d1
Marker | | |Cm|Size |Module id | |Ch| |Ix|Chksm|
*/
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
uint8_t channel = 1 << (relay & 0x03); // Channel relays are bit masked
SSPMInitSend();
SspmBuffer[16] = SSPM_FUNC_GET_ENERGY; // 0x18
SspmBuffer[18] = 0x10;
memcpy(SspmBuffer +19, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[31] = 0x01;
SspmBuffer[32] = channel;
SspmBuffer[33] = 0;
SspmBuffer[34] = 0x3C;
Sspm->command_sequence++;
SspmBuffer[35] = Sspm->command_sequence;
SSPMSend(38);
}
void SSPMSendGetLog(uint32_t relay, uint32_t entries) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1a 00 10 6b 7e 32 37 39 37 34 13 4b 35 36 37 00 00 00 1d 09 8c cd -- Logs 1 to 29
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1a 00 10 8b 34 32 37 39 37 34 13 4b 35 36 37 00 1d 00 3a 14 b8 ee -- Logs 30 to 58
Marker | | |Cm|Size |Module id |Start|End |Ix|Chksm|
Start = newest log start number (Latest is 0)
End = older log end number (End - Start >= 29 (0x1d))
*/
uint8_t module = relay >> 2;
if (module >= Sspm->module_max) { return; }
uint32_t startlog = (entries >= 29) ? entries -29 : 0;
SSPMInitSend();
SspmBuffer[16] = SSPM_FUNC_GET_LOG; // 0x1A
SspmBuffer[18] = 0x10;
memcpy(SspmBuffer +19, Sspm->module[SSPMGetMappedModuleId(module)], SSPM_MODULE_NAME_SIZE);
SspmBuffer[31] = startlog >> 8; // MSB start log
SspmBuffer[32] = startlog; // LSB start log
SspmBuffer[33] = entries >> 8; // MSB end log
SspmBuffer[34] = entries; // LSB end log - Number of logs
Sspm->command_sequence++;
SspmBuffer[35] = Sspm->command_sequence;
SSPMSend(38);
}
void SSPMSendGetEnergyPeriod(uint32_t relay) {
/*
Start
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 17 8b 34 32 37 39 37 34 13 4b 35 36 37 03 00 07 e6 01 1c 0d 08 33 00 81 1a 1c 41 - L4 Start 2022-01-28T14:08:51
Marker | | |Cm|Size |Module id |Ch|St|Year |Mo|Da|HH|MM|SS|Milli|Ix|Chksm|
|L4|--| 2022| 1|28|13|08|51| 129|
|Start
Immediate request for refresh
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 0e 8b 34 32 37 39 37 34 13 4b 35 36 37 03 02 1b 5a 30 - L4 Refresh
Marker | | |Cm|Size |Module id |Ch|--|Ix|Chksm|
|L4|Refresh
Following requests
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 0e 8b 34 32 37 39 37 34 13 4b 35 36 37 03 02 1c 98 71 - L4 Refresh
Marker | | |Cm|Size |Module id |Ch|--|Ix|Chksm|
|L4|Refresh
Stop
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 17 8b 34 32 37 39 37 34 13 4b 35 36 37 03 01 07 e6 01 1c 0d 28 1f 03 23 21 04 04 - L4 Stop 2022-01-28T14:40:32
Marker | | |Cm|Size |Module id |Ch|St|Year |Mo|Da|HH|MM|SS|Milli|Ix|Chksm|
|L4|--| 2022| 1|28|13|40|31| 803|
|Stop
*/
SspmBuffer[16] = SSPM_FUNC_ENERGY_PERIOD; // 0x1B
}
/*********************************************************************************************/
void SSPMAddModule(void) {
if (Sspm->module_max < SSPM_MAX_MODULES) {
memcpy(Sspm->module[Sspm->module_max], SspmBuffer + 19, SSPM_MODULE_NAME_SIZE);
if (0 == Sspm->max_power) {
Sspm->max_current = SspmBuffer[39] + (float)SspmBuffer[40] / 100; // x.xxA
Sspm->min_current = SspmBuffer[41] + (float)SspmBuffer[42] / 100; // x.xxA
Sspm->max_power = SSPMGetValue(&SspmBuffer[49]); // x.xxVA
Sspm->min_power = SSPMGetValue(&SspmBuffer[52]); // x.xxVA
Sspm->max_voltage = SSPMGetValue(&SspmBuffer[43]); // x.xxV
Sspm->min_voltage = SSPMGetValue(&SspmBuffer[46]); // x.xxV
}
uint32_t module_id = SspmBuffer[19] << 8 | SspmBuffer[20];
int mapped = SSPMGetModuleNumberFromMapIfFound(module_id);
if (-1 == mapped) {
// Scanned module not in mapped list. Append if possible
for (uint32_t module = Sspm->module_max; module < SSPM_MAX_MODULES; module++) {
if (0 == Sspm->Settings.module_map[module]) {
Sspm->Settings.module_map[module] = module_id;
mapped = module;
break;
}
}
Sspm->map_change = true;
}
mapped++;
AddLog(LOG_LEVEL_INFO, PSTR("SPM: 4Relay %d (mapped to %d) type %d version %d.%d.%d found with id %12_H"),
Sspm->module_max +1, mapped, SspmBuffer[35], SspmBuffer[36], SspmBuffer[37], SspmBuffer[38], Sspm->module[Sspm->module_max]);
Sspm->module_max++;
if (Settings->save_data) {
TasmotaGlobal.save_data_counter = Settings->save_data +2; // Postpone flash write until all modules are scanned
}
}
}
/*********************************************************************************************/
void SSPMHandleReceivedData(void) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 04 00 02 00 00 06 98 06
Marker |Module id |Ac|Cm|Size | |Ix|Chksm|
*/
bool ack = (0x80 == SspmBuffer[15]); // Ac
uint32_t command = SspmBuffer[16]; // Cm
uint32_t expected_bytes = (SspmBuffer[17] << 8) + SspmBuffer[18]; // Size
// 0 - OK
// 1 -
// 2 - Timeout
// 3 - Log empty
// 4 -
// 5 - Out of command sync
uint32_t status = SspmBuffer[19]; // Status id expected_bytes is 1
uint32_t command_sequence = SspmBuffer[19 + expected_bytes]; // Ix
// AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Rcvd ack %d, cmnd %d, seq %d, size %d"),
// ack, command, command_sequence, expected_bytes);
if (ack) {
// Responses from ARM (Acked)
if (status > 0) {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Command %d result %d"), command, status);
}
switch(command) {
case SSPM_FUNC_FIND:
/* 0x00
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 01 00 00 fc 73
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 22 50 -- SPI response
|Er|Cm|Size |St|Ix|Chksm|
*/
if (!status) {
Sspm->mstate++; // Cycle to
}
break;
case SSPM_FUNC_SET_OPS:
/* 0x03
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
aa 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 03 00 01 00 fb 84 fd
Marker |Module id |Ac|Cm|Size |St|Ix|Chksm|
*/
if (!status && (Sspm->overload_relay < 255)) {
SSPMSendGetOps(Sspm->overload_relay >> 2);
}
break;
case SSPM_FUNC_GET_OPS:
/* 0x04 - Overload Protection
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 04 00 02 00 00 06 98 06
Marker |Module id |Ac|Cm|Size |St| |Ix|Chksm|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
AA 55 01 6B 7E 32 37 39 37 34 13 4B 35 36 37 80 04 00 35 00 07 00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00
38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
00 11 30 00 00 00 0A 00 F0 00 00 00 0A 00 14 00 00 07 8A 86
Marker |Module id |Ac|Cm|Size |St|Ch|Ra|Max P |Min P |Max U |Min U |Max I |De|Ix|Chksm|
| | | 4400W| 0.1W| 240V| 0.1V| 20A| |
Ch - Bitmask channel 01 = 1, 02 = 2, 04 = 3, 08 = 4
Ra - Bitmask enabled features xxxxxxx1 Enable Max current
Ra - Bitmask enabled features xxxxxx1x Enable Min voltage
Ra - Bitmask enabled features xxxxx1xx Enable Max voltage
Ra - Bitmask enabled features xxxx1xxx Enable Min power
Ra - Bitmask enabled features xxx1xxxx Enable Max power
De - 0 to 255 seconds Overload detection delay
*/
if (!status && (Sspm->overload_relay < 255)) {
Response_P(PSTR("{\"SSPMOverload%d\":"), Sspm->overload_relay +1);
if (expected_bytes < 19) {
ResponseAppend_P(PSTR("\"None\"}"));
} else {
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[3] << 8 | SspmBuffer[4]);
uint32_t channels = SspmBuffer[20];
uint32_t offset = 21;
for (uint32_t i = 0; i < 4; i++) {
if (channels & 1) {
uint32_t relay = (module * 4) +i;
if (Sspm->overload_relay == relay) {
Sspm->overload_enable = SspmBuffer[offset];
uint32_t enabled = Sspm->overload_enable;
char bitmask[] = "00000";
for (uint32_t j = 0; j < 5; j++) {
if (enabled & 1) {
if (0 == j) { bitmask[4] = '1'; } // MaxCurrent
if (1 == j) { bitmask[2] = '1'; } // MinVoltage
if (2 == j) { bitmask[3] = '1'; } // MaxVoltage
if (3 == j) { bitmask[0] = '1'; } // MinPower
if (4 == j) { bitmask[1] = '1'; } // MaxPower
}
enabled >>= 1;
}
Sspm->overload_max_power = SSPMGetValue(&SspmBuffer[offset +1]); // x.xxVA
Sspm->overload_min_power = SSPMGetValue(&SspmBuffer[offset +4]); // x.xxVA
Sspm->overload_max_voltage = SSPMGetValue(&SspmBuffer[offset +7]); // x.xxV
Sspm->overload_min_voltage = SSPMGetValue(&SspmBuffer[offset +10]); // x.xxV
Sspm->overload_max_current = SSPMGetValue(&SspmBuffer[offset +13]); // x.xxA
Sspm->overload_delay = SspmBuffer[offset +16];
ResponseAppend_P(PSTR("{\"Delay\":%d,\"Set\":%s,\"MinPower\":%2_f,\"MaxPower\":%2_f,\"MinVoltage\":%2_f,\"MaxVoltage\":%2_f,\"MaxCurrent\":%2_f}}"),
Sspm->overload_delay, bitmask,
&Sspm->overload_min_power, &Sspm->overload_max_power, &Sspm->overload_min_voltage, &Sspm->overload_max_voltage, &Sspm->overload_max_current);
break;
}
offset += 17;
}
channels >>= 1;
}
if (!channels) {
ResponseAppend_P(PSTR("\"None\"}"));
}
}
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR("SSPMOverload"));
Sspm->overload_relay = 255;
} else {
Sspm->module_selected--;
if (Sspm->module_selected > 0) {
SSPMSendGetModuleState(Sspm->module_selected -1);
} else {
SSPMSendGetScheme(Sspm->module_selected);
}
}
break;
case SSPM_FUNC_GET_MODULE_STATE:
/* 0x09
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
AA 55 01 8b 34 32 37 39 37 34 13 4b 35 36 37 80 09 00 06 00 0f 01 01 01 01 05 fe 35
|OS|4RelayMasks|
*/
if (!status && (0x06 == expected_bytes)) {
// SspmBuffer[20] & 0x0F // Relays operational
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[3] << 8 | SspmBuffer[4]);
#ifdef SSPM_SIMULATE
module = Sspm->simulated_module;
#endif
power_t current_state = (SspmBuffer[20] >> 4) << (module * 4); // Relays state
power_t mask = 0x0000000F << (module * 4);
TasmotaGlobal.power &= (POWER_MASK ^ mask);
TasmotaGlobal.power |= current_state;
Sspm->old_power = TasmotaGlobal.power;
TasmotaGlobal.devices_present += 4;
}
SSPMSendGetOps(Sspm->module_selected -1);
break;
case SSPM_FUNC_GET_SCHEME:
/* 0x0B
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 0b 00 02 00 00 09 bb c7
|St|??|
*/
if (0x02 == expected_bytes) {
}
Sspm->module_selected++;
if (Sspm->module_selected < Sspm->module_max) {
SSPMSendGetScheme(Sspm->module_selected);
} else {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Relay scan done"));
Sspm->mstate = SPM_SCAN_COMPLETE;
}
break;
case SSPM_FUNC_SET_TIME:
/* 0x0C
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 0c 00 01 00 04 3e 62
*/
TasmotaGlobal.devices_present = 0;
SSPMSendGetModuleState(Sspm->module_selected -1);
break;
case SSPM_FUNC_INIT_SCAN:
/* 0x10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 ff ff ff ff ff ff ff ff ff ff ff ff 80 10 00 01 00 02 e5 03
*/
break;
case SSPM_FUNC_UNITS:
/* 0x15
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 15 00 04 00 01 00 00 01 81 b1
|St|FwVersio|
| | 1.0.0|
*/
AddLog(LOG_LEVEL_INFO, PSTR("SPM: Main version %d.%d.%d found"), SspmBuffer[20], SspmBuffer[21], SspmBuffer[22]);
Sspm->mstate = SPM_START_SCAN;
break;
case SSPM_FUNC_GET_ENERGY_TOTAL:
/* 0x16
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 16 01 7e 00 8b 34 32 37 39 37 34 13 4b 35 36 37
03 <- L4
07 e5 0b 0d <- End date (Today) 2021 nov 13
07 e5 05 11 <- Start date 2021 may 17
00 05 <- 0.05kWh (13/11 Today)
00 00 <- 0 (12/11 Yesterday)
00 04 <- 0.04kWh (11/11 etc)
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
42 67 46
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 0D 6B 7E 32 37 39 37 34 13 4B 35 36 37 00 B4 0E 92 - L1 Response after midnight (out of sequence)
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 0D 8B 34 32 37 39 37 34 13 4B 35 36 37 00 B5 24 54 - L5 Response after midnight (out of sequence)
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 0D 8B 34 32 37 39 37 34 13 4B 35 36 37 01 B6 B5 15 - L6 Response after midnight (out of sequence)
*/
if (expected_bytes > 24) {
uint32_t entries = (expected_bytes - 22) / 2;
// Find last valid (= non-zero) entry in 6 month fifo buffer
uint16_t energy = 0;
while (!energy && --entries) {
energy = SspmBuffer[41 + (entries *2)] + SspmBuffer[42 + (entries *2)];
if (0x701E == energy) { energy = 0; } // Unknown why sometimes 0x701E (=112.30kWh) pops up
}
uint32_t channel = SspmBuffer[32];
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[20] << 8 | SspmBuffer[21]);
#ifdef SSPM_SIMULATE
module = Sspm->simulated_module;
#endif
if (Sspm->history_relay < 255) {
uint32_t history_module = Sspm->history_relay >> 2;
uint32_t history_channel = Sspm->history_relay & 0x03; // Channel relays are NOT bit masked this time
if ((history_channel == channel) && (history_module == module)) {
Response_P(PSTR("{\"SSPMHistory%d\":["), Sspm->history_relay +1);
} else {
Sspm->history_relay = 255;
}
}
float last_energy_today = Sspm->energy_today[module][channel];
float energy_yesterday = 0;
float energy_total = 0;
for (uint32_t i = 0; i <= entries; i++) {
float energy = SspmBuffer[41 + (i*2)] + (float)SspmBuffer[42 + (i*2)] / 100; // x.xxkWh
if (112.30 == energy) { energy = 0; } // Unknown why sometimes 0x701E (=112.30kWh) pops up
if (Sspm->history_relay < 255) {
ResponseAppend_P(PSTR("%s%*_f"), (i)?",":"", Settings->flag2.energy_resolution, &energy);
}
if (0 == i) {
Sspm->energy_today[module][channel] = energy;
} else {
if (1 == i) { energy_yesterday = energy; }
energy_total += energy;
}
}
uint8_t history_day = SspmBuffer[36]; // Date of last entry
if (0 == Sspm->history_day[module][channel]) { // Initial setting
Sspm->history_day[module][channel] = history_day;
}
if ((0 == Sspm->Settings.energy_total[module][channel]) && energy_total) {
Sspm->Settings.energy_yesterday[module][channel] = energy_yesterday; // Initial setting
Sspm->Settings.energy_total[module][channel] = energy_total; // Initial setting
if (Settings->save_data) {
TasmotaGlobal.save_data_counter = Settings->save_data +2; // Postpone flash write until all relays are updated
}
}
// If received daily energy date is changed then update total energy
// This happens around midnight in normal situations
else if (Sspm->history_day[module][channel] != history_day) {
Sspm->history_day[module][channel] = history_day;
Sspm->Settings.energy_yesterday[module][channel] = last_energy_today; // Daily save
Sspm->Settings.energy_total[module][channel] += last_energy_today; // Daily incremental save
if (Settings->save_data) {
TasmotaGlobal.save_data_counter = Settings->save_data +2; // Postpone flash write until all relays are updated
}
}
Sspm->energy_total[module][channel] = Sspm->Settings.energy_total[module][channel] + Sspm->energy_today[module][channel];
if (Sspm->history_relay < 255) {
ResponseAppend_P(PSTR("]}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR("SSPMHistory"));
Sspm->history_relay = 255; // Disable display energy history
}
Sspm->allow_updates = 1;
}
break;
case SSPM_FUNC_GET_ENERGY:
/* 0x18
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 18 00 01 00 15 31 92
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 18 00 01 05 85 0D 91 -- Error after midnight
Marker |Module id |Ac|Cm|Size |St|Ix|Chksm|
*/
break;
case SSPM_FUNC_GET_LOG:
/* 0x1A - Module logging
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1a 01 3a 00 6b 7e 32 37 39 37 34 13 4b 35 36 37
1e Number of log entries (1e = 30)
07 e5 0b 06 0f 25 19 02 01 00 10 byte log entry
|-- trigger 00 = App, 01 = Device, 02 = Overload, 03 = Overtemp
|----- state 00 = Off, 01 = On
|-------- Channel 00 to 03
|----------- Second = 25
|-------------- Minute = 37
|----------------- Hour = 15
|-------------------- Day = 6
|----------------------- Month = 11 = November
----------------------------- Year 07 e5 = 2021
07 e5 0b 06 0f 1f 08 00 00 01
07 e5 0b 06 0f 1e 1e 01 01 01
07 e5 0b 06 0e 37 36 03 00 00
07 e5 0b 06 0e 37 36 01 00 00
07 e5 0b 06 0e 36 37 01 01 00
...
07 e5 0b 06 0d 30 2d 03 00 01 09 89 fe
Error:
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1A 00 01 03 E5 45 EB -- Log empty
| |
*/
if ((!status || (3 == status)) && (Sspm->log_relay < 255)) {
uint32_t module = Sspm->log_relay >> 2;
uint32_t channel = Sspm->log_relay & 0x03; // Channel relays are NOT bit masked this time
Response_P(PSTR("{\"SSPMLog%d\":"), Sspm->log_relay +1);
if (module != SSPMGetModuleNumberFromMap(SspmBuffer[20] << 8 | SspmBuffer[21])) {
ResponseAppend_P(PSTR("\"Wrong module\"}"));
}
else if (3 == status) {
ResponseAppend_P(PSTR("\"Empty\"}")); // Module log empty
}
else {
uint32_t entries = SspmBuffer[32];
uint32_t offset = 33;
bool more = false;
for (uint32_t i = 0; i < entries; i++) {
if (SspmBuffer[offset +7] == channel) {
uint32_t year = SspmBuffer[offset] << 8 | SspmBuffer[offset +1];
char stemp[10]; // One of "App|Device|Overload|Overtemp"
ResponseAppend_P(PSTR("%s{\"Time\":\"%d-%02d-%02dT%02d:%02d:%02d\",\"Trigger\":\"%s\",\"State\":\"%s\"}"),
(more)?",":"[", year, SspmBuffer[offset +2], SspmBuffer[offset +3],
SspmBuffer[offset +4], SspmBuffer[offset +5], SspmBuffer[offset +6],
GetTextIndexed(stemp, sizeof(stemp), SspmBuffer[offset +9] & 0x03, kSSPMTriggers),
GetStateText(SspmBuffer[offset +8]));
more = true;
}
offset += 10;
}
if (more) {
ResponseAppend_P(PSTR("]}"));
}else {
ResponseAppend_P(PSTR("\"None\"}")); // Module log contains no logging for requested relay
}
}
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR("SSPMLog"));
}
Sspm->log_relay = 255; // Disable display energy history
break;
case SSPM_FUNC_ENERGY_PERIOD:
/* 0x1B
Response after start energy period
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 0e 00 8b 34 32 37 39 37 34 13 4b 35 36 37 03 1a fc 7c - L4
Marker |Module id |Ac|Cm|Size |St|Module Id |Ch|Ix|Chksm|
|OK| |L4|
Response after first auto-refresh AND following refreshes AND Stop
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 11 00 8b 34 32 37 39 37 34 13 4b 35 36 37 03 00 00 00 1b 1d 54
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 11 00 8b 34 32 37 39 37 34 13 4b 35 36 37 03 00 00 01 20 5e 14
Marker |Module id |Ac|Cm|Size |St|Module Id |Ch|Energy |Ix|Chksm|
|OK| |L4| 0.01kWh|
*/
break;
case SSPM_FUNC_RESET:
/* 0x1C
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 1c 00 01 00 0b f9 e3
*/
// TasmotaGlobal.restart_flag = 2;
break;
}
} else {
// Initiated by ARM
switch(command) {
case SSPM_FUNC_ENERGY_RESULT:
/* 0x06
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 6b 7e 32 37 39 37 34 13 4b 35 36 37 01 00 00 00 e3 5b 00 00 00 00 00 00 00 00 00 6b 1f 95 1e
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 01 00 0B 00 E4 37 00 19 0E 00 00 02 00 19 09 4B 28 1D 71
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 08 00 0A 00 E3 61 00 18 2E 00 00 00 00 18 33 4B 27 D3 0D
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1C 8B 34 32 37 39 37 34 13 4B 35 36 37 08 02 04 00 DC 14 01 C1 3D 00 10 19 01 C2 29 4B 37 6B 26
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 8b 34 32 37 39 37 34 13 4b 35 36 37 08 00 44 00 e1 35 00 9a 3e 00 01 45 00 9a 38 00 08 8b ae
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 1c 8b 34 32 37 39 37 34 13 4b 35 36 37 08 00 4a 00 e1 22 00 61 4d 00 2c 38 00 a8 28 20 26 21 70
|Ch|Curre|Voltage |ActivePo|Reactive|Apparent|5m|
Values are XX XX - number
XX - decimals
5m - 5 minutes Power Consumption (Ws)
*/
{
uint32_t channel = 0;
for (channel = 0; channel < 4; channel++) {
if (SspmBuffer[31] & 1) { break; }
SspmBuffer[31] >>= 1;
}
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[19] << 8 | SspmBuffer[20]);
#ifdef SSPM_SIMULATE
module = Sspm->simulated_module;
#endif
Sspm->current[module][channel] = SspmBuffer[32] + (float)SspmBuffer[33] / 100; // x.xxA
Sspm->voltage[module][channel] = SSPMGetValue(&SspmBuffer[34]); // x.xxV
Sspm->active_power[module][channel] = SSPMGetValue(&SspmBuffer[37]); // x.xxW
Sspm->reactive_power[module][channel] = SSPMGetValue(&SspmBuffer[40]); // x.xxVAr
Sspm->apparent_power[module][channel] = SSPMGetValue(&SspmBuffer[43]); // x.xxVA
float power_factor = (Sspm->active_power[module][channel] && Sspm->apparent_power[module][channel]) ? Sspm->active_power[module][channel] / Sspm->apparent_power[module][channel] : 0;
if (power_factor > 1) { power_factor = 1; }
Sspm->power_factor[module][channel] = power_factor;
SSPMSendAck(command_sequence);
Sspm->allow_updates = 1;
}
break;
case SSPM_FUNC_KEY_PRESS:
/* 0x07
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 0d 6b 7e 32 37 39 37 34 13 4b 35 36 37 11 04 bf c3
|AS|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 0D 6B 7E 32 37 39 37 34 13 4B 35 36 37 01 22 A5 4F - L1 Overload triggered power off
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 0d 8b 34 32 37 39 37 34 13 4b 35 36 37 02 2d bb 08 - L2 Overload triggered power off
*/
if (!Sspm->no_send_key) {
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[19] << 8 | SspmBuffer[20]);
#ifdef SSPM_SIMULATE
// module = Sspm->simulated_module; // Won't work as this is initiated from device
#endif
power_t relay = (SspmBuffer[31] & 0x0F) << (module * 4); // Relays active
power_t relay_state = (SspmBuffer[31] >> 4) << (module * 4); // Relays state
for (uint32_t i = 1; i <= TasmotaGlobal.devices_present; i++) {
if (relay &1) {
ExecuteCommandPower(i, relay_state &1, SRC_BUTTON);
}
relay >>= 1;
relay_state >>= 1;
}
Sspm->old_power = TasmotaGlobal.power;
}
SSPMSendAck(command_sequence);
break;
case SSPM_FUNC_SCAN_START:
/* 0x0F
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 01 02 01 9d f8 - Response after normal scan start
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 01 02 01 9D F8 - Response after midnight - notice reset of sequence number
Marker | |Ac|Cm|Size |St|Ix|Chksm|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 14 00 6B 7E 32 37 39 37 34 13 4B 35 36 37 00 00 00 01 00 00 00 23 9D EF - Response after L1 max_power overload powered off
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 14 00 8B 34 32 37 39 37 34 13 4B 35 36 37 00 00 02 00 00 00 00 98 AC 8B - Response after L6 max_current overload powered off
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 14 00 8B 34 32 37 39 37 34 13 4B 35 36 37 00 02 00 00 00 00 00 94 8B A9 - Response after L6 max_voltage overload powered off
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 14 00 8B 34 32 37 39 37 34 13 4B 35 36 37 00 20 00 00 00 00 00 81 46 6A - Response after L6 min_voltage overload powered off
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 14 00 8b 34 32 37 39 37 34 13 4b 35 36 37 00 00 00 00 00 00 00 2f 38 ca - After power on and overload was disabled
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 14 00 8b 34 32 37 39 37 34 13 4b 35 36 37 80 00 00 00 00 00 00 04 47 82 - At 02:50:24
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 14 00 8b 34 32 37 39 37 34 13 4b 35 36 37 00 00 00 00 00 00 00 05 e7 4b - At 02:50:30
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 14 00 8b 34 32 37 39 37 34 13 4b 35 36 37 20 00 00 00 00 00 00 06 fe 09 - At 08:40:52
aa 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 14 00 8b 34 32 37 39 37 34 13 4b 35 36 37 00 00 00 00 00 00 00 07 26 ca - At 08:40:58
Marker | |Ac|Cm|Size |St|Module id | |Vo|Cu|Po| | | |Ix|Chksm|
32..38 - Bitmask channel 01 = 1, 02 = 2, 04 = 3, 08 = 4 (Max border)
32..38 - Bitmask channel 10 = 1, 20 = 2, 40 = 3, 80 = 4 (Min border)
Cu - Current
Vo - Voltage
Po - Power
Ot - Overtemp
*/
if (status > 0) {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Command %d result %d"), command, status);
}
else if (0x14 == expected_bytes) { // Overload/Overtemp triggered
uint32_t any_bit_set = 0;
for (uint32_t i = 0; i < 7; i++) {
any_bit_set += SspmBuffer[32 +i]; // Overload triggered channel bits
}
if (any_bit_set) { // Signals all is OK again if NOT set
uint32_t module = SSPMGetModuleNumberFromMap(SspmBuffer[20] << 8 | SspmBuffer[21]);
bool more = false;
char border[2][4] = { "Max","Min" };
char stemp[10]; // "Tbd1|Voltage|Current|Power|Tbd2|Tbd3|Tbd4"
Response_P(PSTR("{\"SSPMOverload\":"));
for (uint32_t i = 0; i < 7; i++) {
uint32_t channel = SspmBuffer[32 +i];
for (uint32_t j = 0; j < 8; j++) {
if (channel &1) {
uint32_t relay = (module << 2) +(j & 3);
uint32_t idx = (j >> 2) & 1;
ResponseAppend_P(PSTR("%s{\"L%d\":\"%s%s\"}"), (more)?",":"[", relay +1, border[idx], GetTextIndexed(stemp, sizeof(stemp), i, kSSPMOverload));
more = true;
}
channel >>= 1;
}
}
ResponseAppend_P(PSTR("]}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR("SSPMOverload"));
}
}
SSPMSendAck(command_sequence);
break;
case SSPM_FUNC_SCAN_RESULT:
/* 0x13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 13 00 24 6b 7e 32 37 39 37 34 13 4b 35 36 37 04 00 00 00 82 01 00 00 14 00 00 0a 00 f0 00 00 00 0a 11 30 00 00 00 0a 02 8f cd
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 13 00 24 8b 34 32 37 39 37 34 13 4b 35 36 37 04 00 00 00 82 01 00 00 14 00 00 0a 00 f0 00 00 00 0a 11 30 00 00 00 0a 02 a0 6f
Marker | |Ac|Cm|Size |Module id |Ch| |Ty|FwVersio|Max I|Min I|Max U |Min U |Max P |Min P |Ix|Chksm|
|130| 1.0.0|20.0A|0.10A| 240.00V| 0.10V|4400.00W| 0.10W|
Ty = Type of sub-device. 130: Four-channel sub-device
*/
if (0x24 == expected_bytes) {
SSPMAddModule();
#ifdef SSPM_SIMULATE
if (0 == Sspm->simulate) {
uint8_t current_idh = SspmBuffer[19];
uint8_t current_idl = SspmBuffer[20];
for (Sspm->simulate = 0; Sspm->simulate < SSPM_SIMULATE; Sspm->simulate++) {
SspmBuffer[19] = Sspm->simulate +1;
SspmBuffer[20] = Sspm->simulate +1;
SSPMAddModule();
}
SspmBuffer[19] = current_idh;
SspmBuffer[20] = current_idl;
}
#endif
}
SSPMSendAck(command_sequence);
break;
case SSPM_FUNC_SCAN_DONE:
/* 0x19
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 19 00 00 03 a1 16
*/
SSPMSendAck(command_sequence);
if (Sspm->module_max) {
// Warn for mapping change when removal or addition of 4Relay modules
for (uint32_t module = Sspm->module_max; module < SSPM_MAX_MODULES; module++) {
// Clear obsolete mapping slots
Sspm->Settings.module_map[module] = 0;
}
for (uint32_t module = 0; module < Sspm->module_max; module++) {
// Remove not scanned module (probably physical removed) from mapping
if (-1 == SSPMGetMappedModuleIdIfFound(module)) {
// Clear mapping slot
Sspm->Settings.module_map[module] = 0;
Sspm->map_change = true;
}
}
for (uint32_t module = 0; module < Sspm->module_max; module++) {
// Add scanned module to mapping
uint32_t module_id = SSMPGetModuleId(module);
if (-1 == SSPMGetModuleNumberFromMapIfFound(module_id)) {
// Scanned module not in mapping list (probably due to physical install)
for (uint32_t i = 0; i < Sspm->module_max; i++) {
// Find empty slot in mapping and insert
if (0 == Sspm->Settings.module_map[i]) {
Sspm->Settings.module_map[i] = module_id;
Sspm->map_change = true;
break;
}
}
}
}
if (Sspm->map_change) {
Sspm->map_change = false;
AddLog(LOG_LEVEL_INFO, PSTR("SPM: WARNING 4Relay mapping possibly changed"));
}
Sspm->module_selected = Sspm->module_max;
} else {
for (uint32_t module = 0; module < SSPM_MAX_MODULES; module++) {
// Clear mapping slots
Sspm->Settings.module_map[module] = 0;
memset(Sspm->module[module], 0, SSPM_MODULE_NAME_SIZE);
}
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Relay scan done - none found"));
Sspm->mstate = SPM_NONE;
}
SSPMSendSetTime();
break;
}
}
}
void SSPMSerialInput(void) {
/*
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 19 00 00 03 a1 16
Marker |Module id |Ac|Cm|Size |Ix|Chksm|
AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 01 00 00 fc 73
Marker |Module id |Ac|Cm|Size |Pl|Ix|Chksm|
AA 55 01 6b 7e 32 37 39 37 34 13 4b 35 36 37 80 09 00 06 00 0f 01 01 01 01 05 f9 9d
Marker |Module id |Ac|Cm|Size |Payload |Ix|Chksm|
00 Request
80 Response (Ack)
*/
while (SspmSerial->available()) {
yield();
uint8_t serial_in_byte = SspmSerial->read();
if ((0x01 == serial_in_byte) && (0x55 == SspmBuffer[Sspm->serial_in_byte_counter -1]) && (0xAA == SspmBuffer[Sspm->serial_in_byte_counter -2])) {
if (Sspm->serial_in_byte_counter > 2) {
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: ARM out of sync %*_H"), Sspm->serial_in_byte_counter, SspmBuffer);
}
// Start of message
Sspm->expected_bytes = 0;
SspmBuffer[0] = 0xAA;
SspmBuffer[1] = 0x55;
Sspm->serial_in_byte_counter = 2;
}
if (Sspm->serial_in_byte_counter < SSPM_SERIAL_BUFFER_SIZE -1) {
SspmBuffer[Sspm->serial_in_byte_counter++] = serial_in_byte;
if ((19 == Sspm->serial_in_byte_counter) && (0xAA == SspmBuffer[0]) && (0x55 == SspmBuffer[1]) && (0x01 == SspmBuffer[2])) {
// Message size known
Sspm->expected_bytes = 22 + (SspmBuffer[17] << 8) + SspmBuffer[18];
}
if (Sspm->serial_in_byte_counter == Sspm->expected_bytes) {
// Complete message received
bool more = (!Sspm->Settings.flag.dump && (Sspm->serial_in_byte_counter > 58)); // Skip long dumps as they overwrite log buffer
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: ARM %*_H%s"), (more) ? 58 : Sspm->serial_in_byte_counter, SspmBuffer, (more) ? "..." : "");
uint16_t crc_rcvd = (SspmBuffer[Sspm->serial_in_byte_counter -2] << 8) + SspmBuffer[Sspm->serial_in_byte_counter -1];
uint16_t crc_calc = SSPMCalculateCRC(SspmBuffer, Sspm->serial_in_byte_counter -2);
if (crc_rcvd == crc_calc) {
SSPMHandleReceivedData();
} else {
Sspm->error_led_blinks = 20;
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: CRC error"));
}
Sspm->serial_in_byte_counter = 0;
Sspm->expected_bytes = 0;
}
} else {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Serial input buffer overflow"));
Sspm->serial_in_byte_counter = 0;
Sspm->expected_bytes = 0;
}
}
}
/*********************************************************************************************/
bool SSPMSendSPI(uint32_t size) {
uint16_t crc = SSPMCalculateCRC(SspmBuffer, size -2);
SspmBuffer[size -2] = (uint8_t)(crc >> 8);
SspmBuffer[size -1] = (uint8_t)crc;
SPI.beginTransaction(SPISettings(10000000, MSBFIRST, SPI_MODE0)); // Set up SPI at 10MHz, MSB first, Capture at rising edge
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
// AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 51
// Marker |Module id |Ac|Cm|Size |Ix|Chksm|
SPI.writeBytes(SspmBuffer, size); // Send data
delayMicroseconds(600); // Wait for receipt delay deduced from initial SPM SPI comms
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
// AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 22 50
// Marker |Module id |Ac|Cm|Size |Ix|Chksm|
bool crc_ok = false;
uint32_t expected_bytes = 20; // Location of expected bytes (Size) - This works fine
SPI.transferBytes(nullptr, SspmBuffer, expected_bytes); // First receive data up to known location of expected bytes
if ((0xAA == SspmBuffer[0]) && (0x55 == SspmBuffer[1]) && (0x01 == SspmBuffer[2])) {
// Message size known
expected_bytes = 2 + (SspmBuffer[17] << 8) + SspmBuffer[18];
if (expected_bytes < SSPM_SERIAL_BUFFER_SIZE - 20) {
SPI.transferBytes(nullptr, SspmBuffer +20, expected_bytes); // Then receive the expected bytes
// Complete message received
expected_bytes += 20;
bool more = (!Sspm->Settings.flag.dump && (expected_bytes > 58)); // Skip long dumps as they overwrite log buffer
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("SPM: SPI %*_H%s"), (more) ? 58 : expected_bytes, SspmBuffer, (more) ? "..." : "");
uint16_t crc_rcvd = (SspmBuffer[expected_bytes -2] << 8) + SspmBuffer[expected_bytes -1];
uint16_t crc_calc = SSPMCalculateCRC(SspmBuffer, expected_bytes -2);
crc_ok = (crc_rcvd == crc_calc);
if (crc_ok) {
// SSPMHandleReceivedData();
} else {
Sspm->error_led_blinks = 20;
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: SPI CRC error"));
}
} else {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: SPI buffer overflow"));
}
}
SPI.endTransaction(); // Stop SPI transaction
return crc_ok;
}
bool SSPMSendSPIFind(void) {
// Send
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
// AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 51 every 600uSecs
// Wait for
// AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 01 00 00 FC 73 from ARM
// or
// AA 55 01 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 22 50 from ARM (No flash)
for (uint32_t i = 0; i < 40; i++) {
SSPMInitSend();
SspmBuffer[19] = SSPM_FUNC_FIND;
if (SSPMSendSPI(22)) { return true; }
}
return false;
}
/*********************************************************************************************/
void SSPMInit(void) {
if (!ValidTemplate(PSTR("Sonoff SPM")) || !PinUsed(GPIO_RXD) || !PinUsed(GPIO_TXD)) { return; }
Sspm = (TSspm*)calloc(sizeof(TSspm), 1); // Need calloc to reset registers to 0/false
if (!Sspm) { return; }
SspmBuffer = (uint8_t*)malloc(SSPM_SERIAL_BUFFER_SIZE);
if (!SspmBuffer) {
free(Sspm);
return;
}
SspmSerial = new TasmotaSerial(Pin(GPIO_RXD), Pin(GPIO_TXD), 1, 0, SSPM_SERIAL_BUFFER_SIZE);
if (!SspmSerial->begin(115200)) {
free(SspmBuffer);
free(Sspm);
return;
}
SSPMSettingsLoad();
pinMode(SSPM_GPIO_ARM_RESET, OUTPUT);
digitalWrite(SSPM_GPIO_ARM_RESET, 1);
pinMode(SSPM_GPIO_LED_ERROR, OUTPUT);
digitalWrite(SSPM_GPIO_LED_ERROR, 0);
if (TasmotaGlobal.spi_enabled) {
SPI.begin(Pin(GPIO_SPI_CLK), Pin(GPIO_SPI_MISO), Pin(GPIO_SPI_MOSI), -1);
} else {
SPI.begin(14, 12, 13, -1);
}
if (0 == Settings->flag2.voltage_resolution) {
Settings->flag2.voltage_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
Settings->flag2.current_resolution = 2; // SPM has 2 decimals
Settings->flag2.wattage_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
Settings->flag2.energy_resolution = 1; // SPM has 2 decimals but this keeps the gui clean
}
#if CONFIG_IDF_TARGET_ESP32
#ifdef USE_ETHERNET
Settings->eth_address = 0; // EthAddress
Settings->eth_type = ETH_PHY_LAN8720; // EthType
Settings->eth_clk_mode = ETH_CLOCK_GPIO17_OUT; // EthClockMode
#endif
#endif
Sspm->overload_relay = 255; // Disable display overload settings
Sspm->history_relay = 255; // Disable display energy history
Sspm->log_relay = 255; // Disable display logging
Sspm->old_power = TasmotaGlobal.power;
Sspm->power_on_state = TasmotaGlobal.power;
Sspm->mstate = SPM_WAIT; // Start init sequence
}
/*********************************************************************************************/
void SSPMEvery100ms(void) {
Sspm->last_totals++;
if (Sspm->no_send_key) { Sspm->no_send_key--; }
if (Sspm->timeout) {
Sspm->timeout--;
if (!Sspm->timeout) {
Sspm->allow_updates = 1;
}
}
if (Sspm->error_led_blinks) {
uint32_t state = 1; // Stay lit
if (Sspm->error_led_blinks < 255) {
Sspm->error_led_blinks--;
state = Sspm->error_led_blinks >> 1 &1; // Blink every 0.4s
}
digitalWrite(SSPM_GPIO_LED_ERROR, state);
}
// Fix race condition if the ARM doesn't respond
if ((Sspm->mstate > SPM_NONE) && (Sspm->mstate < SPM_SEND_FUNC_UNITS)) {
Sspm->counter++;
if (Sspm->counter > 20) {
Sspm->mstate = SPM_NONE;
Sspm->error_led_blinks = 255;
}
}
switch (Sspm->mstate) {
case SPM_NONE:
return;
case SPM_WAIT:
// 100ms wait
Sspm->mstate = SPM_RESET;
break;
case SPM_RESET:
// Reset ARM
digitalWrite(SSPM_GPIO_ARM_RESET, 0);
delay(18);
digitalWrite(SSPM_GPIO_ARM_RESET, 1);
delay(18);
Sspm->mstate = SPM_POLL_ARM;
case SPM_POLL_ARM:
// Wait for first acknowledge from ARM after reset
SSPMSendCmnd(SSPM_FUNC_FIND);
break;
case SPM_POLL_ARM_SPI:
SSPMSendSPIFind();
Sspm->mstate = SPM_POLL_ARM_2;
break;
case SPM_POLL_ARM_2:
SSPMSendCmnd(SSPM_FUNC_FIND);
Sspm->mstate = SPM_POLL_ARM_3;
break;
case SPM_POLL_ARM_3:
// Wait for second acknowledge from ARM after reset
break;
case SPM_SEND_FUNC_UNITS:
// Get number of units
SSPMSendCmnd(SSPM_FUNC_UNITS);
break;
case SPM_START_SCAN:
// Start scan module sequence
Sspm->error_led_blinks = 0; // Reset error light
Sspm->overload_relay = 255; // Disable display overload settings
Sspm->history_relay = 255; // Disable display energy history
Sspm->log_relay = 255; // Disable display logging
Sspm->module_max = 0;
SSPMSendInitScan();
Sspm->mstate = SPM_WAIT_FOR_SCAN;
Sspm->last_totals = 0;
break;
case SPM_WAIT_FOR_SCAN:
// Wait for scan sequence to complete within 60 seconds
if (Sspm->last_totals > 600) {
AddLog(LOG_LEVEL_DEBUG, PSTR("SPM: Relay scan timeout"));
Sspm->mstate = SPM_NONE;
Sspm->error_led_blinks = 255;
}
break;
case SPM_SCAN_COMPLETE:
// Scan sequence finished
#ifndef SSPM_SIMULATE
if (Sspm->power_on_state) {
TasmotaGlobal.power = Sspm->power_on_state;
Sspm->power_on_state = 0; // Reset power on state solving re-scan
SetPowerOnState(); // Set power on state now that all relays have been detected
}
#endif
TasmotaGlobal.discovery_counter = 1; // Force TasDiscovery()
Sspm->allow_updates = 1; // Enable requests from 100mSec loop
Sspm->get_energy_relay = 0;
Sspm->mstate = SPM_GET_ENERGY_TOTALS;
break;
case SPM_STALL_MIDNIGHT:
// Get totals for ALL relays after midnight updating Tasmotas total and yesterday energy
if (Sspm->last_totals > 600) { // Continue after 60 seconds
Sspm->get_energy_relay = 0;
Sspm->mstate = SPM_GET_ENERGY_TOTALS;
}
break;
case SPM_GET_ENERGY_TOTALS:
// Retrieve Energy total status from up to 128 relays
if (Sspm->allow_updates) {
SSPMSetLock(4);
SSPMSendGetEnergyTotal(Sspm->get_energy_relay);
Sspm->get_energy_relay++;
if (Sspm->get_energy_relay >= TasmotaGlobal.devices_present) {
Sspm->get_energy_relay = TasmotaGlobal.devices_present;
Sspm->mstate = SPM_UPDATE_CHANNELS;
}
}
break;
case SPM_UPDATE_CHANNELS:
// Retrieve Energy status from up to 128 powered on relays (takes 128 * 2s!!)
if (Sspm->allow_updates) {
int32_t time = (RtcTime.hour *3600) + (RtcTime.minute *60) + RtcTime.second;
if (time > 86370) { // Stall updates after 23:59:31 to satisfy ARM firmware
Sspm->last_totals = 0;
Sspm->mstate = SPM_STALL_MIDNIGHT;
} else {
Sspm->get_energy_relay++;
if (Sspm->get_energy_relay >= TasmotaGlobal.devices_present) {
Sspm->get_energy_relay = 0;
if (Sspm->last_totals > 1200) { // Get totals every 2 minutes (takes 128 * 0.2s)
Sspm->last_totals = 0;
Sspm->get_totals = 1;
} else {
Sspm->get_totals = 0;
}
}
power_t powered_on = TasmotaGlobal.power >> Sspm->get_energy_relay;
if (powered_on &1) {
SSPMSetLock(4);
if (Sspm->get_totals) {
SSPMSendGetEnergyTotal(Sspm->get_energy_relay);
} else {
SSPMSendGetEnergy(Sspm->get_energy_relay);
}
} else {
uint32_t module = Sspm->get_energy_relay >> 2;
uint32_t channel = Sspm->get_energy_relay &3;
if (Sspm->voltage[module][channel]) {
Sspm->voltage[module][channel] = 0;
Sspm->current[module][channel] = 0;
Sspm->active_power[module][channel] = 0;
Sspm->apparent_power[module][channel] = 0;
Sspm->reactive_power[module][channel] = 0;
Sspm->power_factor[module][channel] = 0;
}
}
}
}
break;
}
}
/*********************************************************************************************/
bool SSPMSetDevicePower(void) {
power_t new_power = XdrvMailbox.index;
if (new_power != Sspm->old_power) {
uint32_t relay_count = 0;
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
uint32_t new_state = (new_power >> i) &1;
if (new_state != ((Sspm->old_power >> i) &1)) {
SSPMSendSetRelay(i, new_state);
relay_count++;
}
}
Sspm->old_power = new_power;
if (relay_count) {
Sspm->no_send_key = relay_count *10; // Disable button response for relay_count * 10 * 0.1 second
}
}
return true;
}
/*********************************************************************************************/
bool SSPMButton(void) {
bool result = false;
uint32_t button = XdrvMailbox.payload;
if ((PRESSED == button) && (NOT_PRESSED == Sspm->last_button)) { // Button pressed
Sspm->mstate = SPM_START_SCAN;
result = true; // Disable further button processing
}
Sspm->last_button = button;
return result;
}
/*********************************************************************************************/
const uint16_t SSPM_SIZE = 300;
char* SSPMEnergyFormat(char* result, float* input, uint32_t resolution, uint8_t* indirect, uint8_t offset, uint32_t count) {
ext_snprintf_P(result, SSPM_SIZE, PSTR("</td>")); // Skip first column
// </td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td>
// </td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td>
// </td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td>
// </td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td style='text-align:right'>1.23</td><td>&nbsp;</td><td>
for (uint32_t i = 0; i < count; i++) {
ext_snprintf_P(result, SSPM_SIZE, PSTR("%s<td style='text-align:%s'>%*_f</td><td>&nbsp;</td>"),
result, (Settings->flag5.gui_table_align)?PSTR("right"):PSTR("left"), resolution, &input[indirect[offset +i]]);
}
ext_snprintf_P(result, SSPM_SIZE, PSTR("%s<td>"), result);
return result;
}
void SSPMEnergyShow(bool json) {
if (!TasmotaGlobal.devices_present) { return; } // Not ready yet
if (json) {
ResponseAppend_P(PSTR(",\"SPM\":{\"" D_JSON_ENERGY "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->energy_total[i >>2][i &3]);
}
#ifdef SSPM_JSON_ENERGY_YESTERDAY
ResponseAppend_P(PSTR("],\"" D_JSON_YESTERDAY "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->Settings.energy_yesterday[i >>2][i &3]);
}
#endif
#ifdef SSPM_JSON_ENERGY_TODAY
ResponseAppend_P(PSTR("],\"" D_JSON_TODAY "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.energy_resolution, &Sspm->energy_today[i >>2][i &3]);
}
#endif
ResponseAppend_P(PSTR("],\"" D_JSON_ACTIVE_POWERUSAGE "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->active_power[i >>2][i &3]);
}
ResponseAppend_P(PSTR("],\"" D_JSON_APPARENT_POWERUSAGE "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->apparent_power[i >>2][i &3]);
}
ResponseAppend_P(PSTR("],\"" D_JSON_REACTIVE_POWERUSAGE "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.wattage_resolution, &Sspm->reactive_power[i >>2][i &3]);
}
ResponseAppend_P(PSTR("],\"" D_JSON_POWERFACTOR "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", 2, &Sspm->power_factor[i >>2][i &3]);
}
ResponseAppend_P(PSTR("],\"" D_JSON_VOLTAGE "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.voltage_resolution, &Sspm->voltage[i >>2][i &3]);
}
ResponseAppend_P(PSTR("],\"" D_JSON_CURRENT "\":["));
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
ResponseAppend_P(PSTR("%s%*_f"), (i>0)?",":"", Settings->flag2.current_resolution, &Sspm->current[i >>2][i &3]);
}
ResponseAppend_P(PSTR("]}"));
#ifdef USE_WEBSERVER
} else {
uint8_t relay[SSPM_MAX_MODULES * 4];
uint8_t indirect[SSPM_MAX_MODULES * 4];
uint32_t index = 0;
power_t power = TasmotaGlobal.power;
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
if ((0 == Sspm->Settings.flag.display) ||
((1 == Sspm->Settings.flag.display) && (power >> i) &1)) {
relay[index] = i +1;
indirect[index] = i;
index++;
}
}
if (index) {
if (index > 4) {
Sspm->rotate++;
} else {
Sspm->rotate = 0;
}
if (Sspm->rotate > ((index -1) | 0x3)) { // Always test in case index has changed due to use of SspmDisplay command
Sspm->rotate = 0;
}
uint32_t offset = (Sspm->rotate >> 2) * 4;
uint32_t count = index - offset;
if (count > 4) { count = 4; }
// {s}</th><th></th><th>Head1</th><th></th><td>{e}
// {s}</th><th></th><th>Head1</th><th></th><th>Head2</th><th></th><td>{e}
// {s}</th><th></th><th>Head1</th><th></th><th>Head2</th><th></th><th>Head3</th><th></th><td>{e}
// {s}</th><th></th><th>Head1</th><th></th><th>Head2</th><th></th><th>Head3</th><th></th><th>Head4</th><th></th><td>{e}
char value_chr[SSPM_SIZE];
WSContentSend_P(PSTR("</table><hr/>{t}{s}</th><th></th>")); // First column is empty ({t} = <table style='width:100%'>, {s} = <tr><th>)
bool no_label = false;
for (uint32_t i = 0; i < count; i++) {
WSContentSend_P(PSTR("<th style='text-align:center'>%s%s<th></th>"), (no_label)?"":"L", (no_label)?"":itoa(relay[offset +i], value_chr, 10));
}
WSContentSend_P(PSTR("<td>{e}")); // Last column is units ({e} = </td></tr>)
WSContentSend_PD(HTTP_SNS_VOLTAGE, SSPMEnergyFormat(value_chr, Sspm->voltage[0], Settings->flag2.voltage_resolution, indirect, offset, count));
WSContentSend_PD(HTTP_SNS_CURRENT, SSPMEnergyFormat(value_chr, Sspm->current[0], Settings->flag2.current_resolution, indirect, offset, count));
WSContentSend_PD(HTTP_SNS_POWER, SSPMEnergyFormat(value_chr, Sspm->active_power[0], Settings->flag2.wattage_resolution, indirect, offset, count));
char valu2_chr[SSPM_SIZE];
char valu3_chr[SSPM_SIZE];
WSContentSend_PD(HTTP_ENERGY_SNS1, SSPMEnergyFormat(value_chr, Sspm->apparent_power[0], Settings->flag2.wattage_resolution, indirect, offset, count),
SSPMEnergyFormat(valu2_chr, Sspm->reactive_power[0], Settings->flag2.wattage_resolution, indirect, offset, count),
SSPMEnergyFormat(valu3_chr, Sspm->power_factor[0], 2, indirect, offset, count));
WSContentSend_PD(HTTP_ENERGY_SNS2, SSPMEnergyFormat(value_chr, Sspm->energy_today[0], Settings->flag2.energy_resolution, indirect, offset, count),
SSPMEnergyFormat(valu2_chr, Sspm->Settings.energy_yesterday[0], Settings->flag2.energy_resolution, indirect, offset, count),
SSPMEnergyFormat(valu3_chr, Sspm->energy_total[0], Settings->flag2.energy_resolution, indirect, offset, count));
WSContentSend_P(PSTR("</table><hr/>{t}")); // {t} = <table style='width:100%'> - Define for next FUNC_WEB_SENSOR
}
#endif // USE_WEBSERVER
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
const char kSSPMCommands[] PROGMEM = "SSPM|" // Prefix
"Display|Dump|" // SetOptions
"Log|Energy|History|Scan|IamHere|"
"Reset|Map|Overload|"
D_CMND_ENERGYTOTAL "|" D_CMND_ENERGYYESTERDAY;
void (* const SSPMCommand[])(void) PROGMEM = {
&CmndSSPMDisplay, &CmndSSPMDump,
&CmndSSPMLog, &CmndSSPMEnergy, &CmndSSPMHistory, &CmndSSPMScan, &CmndSSPMIamHere,
&CmndSSPMReset, &CmndSSPMMap, &CmndSSPMOverload,
&CmndSpmEnergyTotal, &CmndSpmEnergyYesterday };
void CmndSSPMDisplay(void) {
// Select either all relays or only powered on relays
// SspmDisplay 0 or SspmDisplay 1
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
Sspm->Settings.flag.display = XdrvMailbox.payload;
}
ResponseCmndNumber(Sspm->Settings.flag.display);
}
void CmndSSPMDump(void) {
// Select either short or full serial dump controlling logging buffer space
// SspmDump 0 or SspmDump 1
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
Sspm->Settings.flag.dump = XdrvMailbox.payload;
}
ResponseCmndNumber(Sspm->Settings.flag.dump);
}
void CmndSpmEnergyTotal(void) {
// Reset Energy Total
// SspmEnergyTotal<relay> 0 - Set total energy from midnight with sum of last month history
// SspmEnergyTotal<relay> 4.23 - Set total energy from midnight (without today's energy)
if (Sspm->module_max) {
uint32_t relay = XdrvMailbox.index -1;
uint32_t module = relay >> 2;
uint32_t channel = relay & 0x03;
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= TasmotaGlobal.devices_present) && XdrvMailbox.data_len) {
Sspm->Settings.energy_total[module][channel] = CharToFloat(XdrvMailbox.data);
Sspm->energy_total[module][channel] = Sspm->Settings.energy_total[module][channel] + Sspm->energy_today[module][channel];
}
ResponseCmndFloat(Sspm->energy_total[module][channel], Settings->flag2.energy_resolution);
}
}
void CmndSpmEnergyYesterday(void) {
// Reset Energy Yesterday
// SspmEnergyTotal<relay> 0 - Set total energy from midnight with sum of last month history
// SspmEnergyTotal<relay> 4.23 - Set total energy from midnight (without today's energy)
if (Sspm->module_max) {
uint32_t relay = XdrvMailbox.index -1;
uint32_t module = relay >> 2;
uint32_t channel = relay & 0x03;
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= TasmotaGlobal.devices_present) && XdrvMailbox.data_len) {
Sspm->Settings.energy_yesterday[module][channel] = CharToFloat(XdrvMailbox.data);
}
ResponseCmndFloat(Sspm->Settings.energy_yesterday[module][channel], Settings->flag2.energy_resolution);
}
}
void CmndSSPMOverload(void) {
// Get / Set overload
// SspmOverload<relay> 0 - Reset overload detection parameters
// SspmOverload<relay> {"Delay":0,"Set":00000,"MinPower":0.10,"MaxPower":4400.00,"MinVoltage":0.10,"MaxVoltage":240.00,"MaxCurrent":20.00}
// SspmOverload<relay> <delay>,<min_power>,<max_power>,<min_voltage>,<max_voltage,<max_current>
// SspmOverload<relay> 10,0.10,4400.00,0.10,240.00,20.00
// SspmOverload<relay> 10 0.10 4400.00 0.10 240.00 20.00
// SspmOverload<relay> 10,12.3 - Enable overload detection after 10 seconds for MinPower
// SspmOverload<relay> 10,0,22.2 - Enable overload detection after 10 seconds for MaxPower
// SspmOverload<relay> 10,0,0,0,235.2 - Enable overload detection after 10 seconds for MaxVoltage
if (Sspm->module_max) {
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
Sspm->overload_relay = XdrvMailbox.index -1;
bool set_overload = false;
if (XdrvMailbox.data_len) {
// Init defaults
Sspm->overload_delay = 0; // No delay
Sspm->overload_enable = 0x00; // Disable overload detection
Sspm->overload_max_power = Sspm->max_power; // x.xxVA
Sspm->overload_min_power = Sspm->min_power; // x.xxVA
Sspm->overload_max_voltage = Sspm->max_voltage; // x.xxV
Sspm->overload_min_voltage = Sspm->min_voltage; // x.xxV
Sspm->overload_max_current = Sspm->max_current; // x.xxA
if ((1 == XdrvMailbox.data_len) && (0 == XdrvMailbox.payload)) { // Set defaults
// SspmOverload<relay> 0 - Reset overload detection parameters
set_overload = true;
}
else if ('{' == XdrvMailbox.data[0]) { // Process as JSON
// SspmOverload<relay> {"Delay":0,"Set":00000,"MinPower":0.10,"MaxPower":4400.00,"MinVoltage":0.10,"MaxVoltage":240.00,"MaxCurrent":20.00}
// set_overload = true;
}
else if (strchr(XdrvMailbox.data, ',') != nullptr) {
// SspmOverload<relay> 10,0.10,4400.00,0.10,240.00,20.00
// SspmOverload<relay> 10 0.10 4400.00 0.10 240.00 20.00
char *data;
uint32_t i = 0;
for (char *str = strtok_r(XdrvMailbox.data, ", ", &data); str && i < 6; str = strtok_r(nullptr, ", ", &data)) {
float value = CharToFloat(str);
if (value > 0) { // 0 = default and no overload detection
switch (i++) {
case 0:
Sspm->overload_delay = (uint8_t)value; // Overload detection reaction time in seconds
break;
case 1:
Sspm->overload_enable = 0x08; // Enable min power overload detection
Sspm->overload_min_power = value;
break;
case 2:
Sspm->overload_enable = 0x10; // Enable max power overload detection
Sspm->overload_max_power = value;
break;
case 3:
Sspm->overload_enable = 0x02; // Enable min voltage overload detection
Sspm->overload_min_voltage = value;
break;
case 4:
Sspm->overload_enable = 0x04; // Enable max voltage overload detection
Sspm->overload_max_voltage = value;
break;
case 5:
Sspm->overload_enable = 0x01; // Enable max current overload detection
Sspm->overload_max_current = value;
break;
}
}
set_overload = true;
}
}
if (set_overload) {
SSPMSendOPS(Sspm->overload_relay);
ResponseClear();
}
} else {
SSPMSendGetOps(Sspm->overload_relay >> 2);
ResponseClear();
}
}
}
void CmndSSPMLog(void) {
// SspmLog<relay> - Report from up to 29 latest log entries
// SspmLog<relay> 10 - Report from up to 10 latest log entries
// SspmLog<relay> 100 - Report from up to 29 log entries
if (Sspm->module_max) {
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
if ((XdrvMailbox.payload < 1) || (XdrvMailbox.payload > 65000)) { XdrvMailbox.payload = 28; }
Sspm->log_relay = XdrvMailbox.index -1;
SSPMSendGetLog(Sspm->log_relay, XdrvMailbox.payload +1);
ResponseClear();
}
}
void CmndSSPMEnergy(void) {
if (Sspm->module_max) {
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
SSPMSendGetEnergy(XdrvMailbox.index -1);
ResponseCmndDone();
}
}
void CmndSSPMHistory(void) {
// Retreive daily history of one relay up to six month
// SspmHistory<relay>
if (Sspm->module_max) {
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > TasmotaGlobal.devices_present)) { XdrvMailbox.index = 1; }
Sspm->history_relay = XdrvMailbox.index -1;
SSPMSendGetEnergyTotal(Sspm->history_relay);
ResponseClear();
}
}
void CmndSSPMScan(void) {
// Start relay module scan taking up to 20 seconds
// SspmScan
Sspm->mstate = SPM_START_SCAN;
ResponseCmndChar(PSTR(D_JSON_STARTED));
}
void CmndSSPMIamHere(void) {
// Blink module ERROR led containing relay
// SspmIamHere 6
if (Sspm->module_max) {
if ((XdrvMailbox.payload < 1) || (XdrvMailbox.payload > TasmotaGlobal.devices_present)) { XdrvMailbox.payload = 1; }
SSPMSendIAmHere(XdrvMailbox.payload -1);
ResponseCmndDone();
}
}
void CmndSSPMReset(void) {
// Reset ARM and restart
// Reset 1
switch (XdrvMailbox.payload) {
case 1:
TasmotaGlobal.restart_flag = 2;
case 2:
Sspm->mstate = SPM_NONE;
SSPMSendCmnd(SSPM_FUNC_RESET);
ResponseCmndChar(PSTR(D_JSON_RESET_AND_RESTARTING));
break;
default:
ResponseCmndChar(PSTR(D_JSON_ONE_TO_RESET));
}
}
void CmndSSPMMap(void) {
// Map scanned module number to physical module number using positional numbering
// SspmMap 0 - start a scan to fill default mapping
// SspmMap 1,3,4,2 - map modules
// TODO: Might need input checks on count and valid different numbers
if (0 == XdrvMailbox.payload) {
for (uint32_t module = 0; module < SSPM_MAX_MODULES; module++) {
Sspm->Settings.module_map[module] = 0; // Clear mapping slots
}
CmndSSPMScan(); // Start scan to fill default mapping
}
else if (Sspm->module_max) { // Valid after initial scan
char *p;
uint32_t i = 0;
for (char* str = strtok_r(XdrvMailbox.data, ",", &p); str && i < Sspm->module_max; str = strtok_r(nullptr, ",", &p)) {
uint32_t module = atoi(str);
if ((module > 0) && (module <= Sspm->module_max)) { // Only valid modules 1 to x
Sspm->Settings.module_map[i] = SSMPGetModuleId(module -1);
}
i++;
}
Response_P(PSTR("{\"%s\":["), XdrvMailbox.command);
for (uint32_t i = 0; i < Sspm->module_max; i++) {
ResponseAppend_P(PSTR("%s%d"), (i)?",":"", SSPMGetModuleNumberFromMap(SSMPGetModuleId(i)) +1);
}
ResponseAppend_P(PSTR("]}"));
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv86(uint8_t function) {
bool result = false;
if (FUNC_INIT == function) {
SSPMInit();
}
else if (Sspm) {
switch (function) {
case FUNC_LOOP:
if (SspmSerial) { SSPMSerialInput(); }
break;
case FUNC_EVERY_100_MSECOND:
SSPMEvery100ms();
break;
case FUNC_SAVE_SETTINGS:
SSPMSettingsSave();
break;
case FUNC_SET_DEVICE_POWER:
result = SSPMSetDevicePower();
break;
case FUNC_JSON_APPEND:
SSPMEnergyShow(true);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
SSPMEnergyShow(false);
break;
#endif // USE_WEBSERVER
case FUNC_COMMAND:
result = DecodeCommand(kSSPMCommands, SSPMCommand);
break;
case FUNC_BUTTON_PRESSED:
result = SSPMButton();
break;
}
}
return result;
}
#endif // USE_SONOFF_SPM
#endif // USE_ENERGY_SENSOR
#endif // ESP32
Reference in New Issue View Git Blame Copy Permalink