History

Jason2866 9f87647af6 Remove Keeloq		2020-08-21 00:14:57 +02:00
..
examples	Remove Keeloq	2020-08-21 00:14:57 +02:00
src	Remove Keeloq	2020-08-21 00:14:57 +02:00
.gitignore	Remove Keeloq	2020-08-21 00:14:57 +02:00
README.md	Remove Keeloq	2020-08-21 00:14:57 +02:00
keywords.txt	Remove Keeloq	2020-08-21 00:14:57 +02:00
library.json	Remove Keeloq	2020-08-21 00:14:57 +02:00
library.properties	Remove Keeloq	2020-08-21 00:14:57 +02:00
platformio.ini	Remove Keeloq	2020-08-21 00:14:57 +02:00

README.md

Fork of RC-SWITCH by @sui77

rc-switch

Use your Arduino or Raspberry Pi to operate remote radio controlled devices

Download

https://github.com/1technophile/rc-switch/releases/latest

rc-switch is also listed in the arduino library manager.

Wiki

https://github.com/1technophile/rc-switch/wiki

Info

Send RC codes

Use your Arduino or Raspberry Pi to operate remote radio controlled devices. This will most likely work with all popular low cost power outlet sockets. If yours doesn't work, you might need to adjust the pulse length.

All you need is a Arduino or Raspberry Pi, a 315/433MHz AM transmitter and one or more devices with one of the supported chipsets:

SC5262 / SC5272
HX2262 / HX2272
PT2262 / PT2272
EV1527 / RT1527 / FP1527 / HS1527
Intertechno outlets
HT6P20X

Receive and decode RC codes

Find out what codes your remote is sending. Use your remote to control your Arduino.

All you need is an Arduino, a 315/433MHz AM receiver (altough there is no instruction yet, yes it is possible to hack an existing device) and a remote hand set.

For the Raspberry Pi, clone the https://github.com/ninjablocks/433Utils project to compile a sniffer tool and transmission commands.