mirror of https://github.com/arendst/Tasmota.git
282 lines
8.8 KiB
C++
282 lines
8.8 KiB
C++
/*
|
|
xnrg_07_ade7953.ino - ADE7953 energy sensor support for Tasmota
|
|
|
|
Copyright (C) 2019 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_I2C
|
|
#ifdef USE_ENERGY_SENSOR
|
|
#ifdef USE_ADE7953
|
|
/*********************************************************************************************\
|
|
* ADE7953 - Energy (Shelly 2.5)
|
|
*
|
|
* Based on datasheet from https://www.analog.com/en/products/ade7953.html
|
|
*
|
|
* I2C Address: 0x38
|
|
\*********************************************************************************************/
|
|
|
|
#define XNRG_07 7
|
|
|
|
#define ADE7953_PREF 1540
|
|
#define ADE7953_UREF 26000
|
|
#define ADE7953_IREF 10000
|
|
|
|
#define ADE7953_ADDR 0x38
|
|
|
|
const uint8_t Ade7953Registers[] {
|
|
0x1B, // RMS current channel B (Relay 1)
|
|
0x13, // Active power channel B
|
|
0x11, // Apparent power channel B
|
|
0x15, // Reactive power channel B
|
|
0x1A, // RMS current channel A (Relay 2)
|
|
0x12, // Active power channel A
|
|
0x10, // Apparent power channel A
|
|
0x14, // Reactive power channel A
|
|
0x1C // RMS voltage (Both relays)
|
|
};
|
|
|
|
struct Ade7953 {
|
|
uint32_t voltage_rms = 0;
|
|
uint32_t current_rms[2] = { 0, 0 };
|
|
uint32_t active_power[2] = { 0, 0 };
|
|
uint8_t init_step = 0;
|
|
} Ade7953;
|
|
|
|
int Ade7953RegSize(uint16_t reg)
|
|
{
|
|
int size = 0;
|
|
switch ((reg >> 8) & 0x0F) {
|
|
case 0x03:
|
|
size++;
|
|
case 0x02:
|
|
size++;
|
|
case 0x01:
|
|
size++;
|
|
case 0x00:
|
|
case 0x07:
|
|
case 0x08:
|
|
size++;
|
|
}
|
|
return size;
|
|
}
|
|
|
|
void Ade7953Write(uint16_t reg, uint32_t val)
|
|
{
|
|
int size = Ade7953RegSize(reg);
|
|
if (size) {
|
|
Wire.beginTransmission(ADE7953_ADDR);
|
|
Wire.write((reg >> 8) & 0xFF);
|
|
Wire.write(reg & 0xFF);
|
|
while (size--) {
|
|
Wire.write((val >> (8 * size)) & 0xFF); // Write data, MSB first
|
|
}
|
|
Wire.endTransmission();
|
|
delayMicroseconds(5); // Bus-free time minimum 4.7us
|
|
}
|
|
}
|
|
|
|
int32_t Ade7953Read(uint16_t reg)
|
|
{
|
|
uint32_t response = 0;
|
|
|
|
int size = Ade7953RegSize(reg);
|
|
if (size) {
|
|
Wire.beginTransmission(ADE7953_ADDR);
|
|
Wire.write((reg >> 8) & 0xFF);
|
|
Wire.write(reg & 0xFF);
|
|
Wire.endTransmission(0);
|
|
Wire.requestFrom(ADE7953_ADDR, size);
|
|
if (size <= Wire.available()) {
|
|
for (uint32_t i = 0; i < size; i++) {
|
|
response = response << 8 | Wire.read(); // receive DATA (MSB first)
|
|
}
|
|
}
|
|
}
|
|
return response;
|
|
}
|
|
|
|
void Ade7953Init(void)
|
|
{
|
|
Ade7953Write(0x102, 0x0004); // Locking the communication interface (Clear bit COMM_LOCK), Enable HPF
|
|
Ade7953Write(0x0FE, 0x00AD); // Unlock register 0x120
|
|
Ade7953Write(0x120, 0x0030); // Configure optimum setting
|
|
}
|
|
|
|
void Ade7953GetData(void)
|
|
{
|
|
int32_t reg[2][4];
|
|
for (uint32_t i = 0; i < sizeof(Ade7953Registers); i++) {
|
|
int32_t value = Ade7953Read(0x300 + Ade7953Registers[i]);
|
|
if (8 == i) {
|
|
Ade7953.voltage_rms = value; // RMS voltage (Both relays)
|
|
} else {
|
|
reg[i >> 2][i &3] = value;
|
|
}
|
|
}
|
|
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: %d, [%d, %d, %d, %d], [%d, %d, %d, %d]"),
|
|
Ade7953.voltage_rms, reg[0][0], reg[0][1], reg[0][2], reg[0][3],
|
|
reg[1][0], reg[1][1], reg[1][2], reg[1][3]);
|
|
|
|
uint32_t apparent_power[2] = { 0, 0 };
|
|
uint32_t reactive_power[2] = { 0, 0 };
|
|
|
|
for (uint32_t channel = 0; channel < 2; channel++) {
|
|
Ade7953.current_rms[channel] = reg[channel][0];
|
|
if (Ade7953.current_rms[channel] < 2000) { // No load threshold (20mA)
|
|
Ade7953.current_rms[channel] = 0;
|
|
Ade7953.active_power[channel] = 0;
|
|
} else {
|
|
Ade7953.active_power[channel] = abs(reg[channel][1]);
|
|
apparent_power[channel] = abs(reg[channel][2]);
|
|
reactive_power[channel] = abs(reg[channel][3]);
|
|
}
|
|
}
|
|
|
|
uint32_t current_rms_sum = Ade7953.current_rms[0] + Ade7953.current_rms[1];
|
|
uint32_t active_power_sum = Ade7953.active_power[0] + Ade7953.active_power[1];
|
|
|
|
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("ADE: U %d, I %d + %d = %d, P %d + %d = %d"),
|
|
Ade7953.voltage_rms, Ade7953.current_rms[0], Ade7953.current_rms[1], current_rms_sum, Ade7953.active_power[0], Ade7953.active_power[1], active_power_sum);
|
|
|
|
if (Energy.power_on) { // Powered on
|
|
Energy.voltage[0] = (float)Ade7953.voltage_rms / Settings.energy_voltage_calibration;
|
|
|
|
for (uint32_t channel = 0; channel < 2; channel++) {
|
|
Energy.data_valid[channel] = 0;
|
|
Energy.active_power[channel] = (float)Ade7953.active_power[channel] / (Settings.energy_power_calibration / 10);
|
|
Energy.reactive_power[channel] = (float)reactive_power[channel] / (Settings.energy_power_calibration / 10);
|
|
Energy.apparent_power[channel] = (float)apparent_power[channel] / (Settings.energy_power_calibration / 10);
|
|
if (0 == Energy.active_power[channel]) {
|
|
Energy.current[channel] = 0;
|
|
} else {
|
|
Energy.current[channel] = (float)Ade7953.current_rms[channel] / (Settings.energy_current_calibration * 10);
|
|
}
|
|
}
|
|
} else { // Powered off
|
|
Energy.data_valid[0] = ENERGY_WATCHDOG;
|
|
Energy.data_valid[1] = ENERGY_WATCHDOG;
|
|
}
|
|
|
|
if (active_power_sum) {
|
|
Energy.kWhtoday_delta += ((active_power_sum * (100000 / (Settings.energy_power_calibration / 10))) / 3600);
|
|
EnergyUpdateToday();
|
|
}
|
|
}
|
|
|
|
void Ade7953EnergyEverySecond()
|
|
{
|
|
if (Ade7953.init_step) {
|
|
if (1 == Ade7953.init_step) {
|
|
Ade7953Init();
|
|
}
|
|
Ade7953.init_step--;
|
|
} else {
|
|
Ade7953GetData();
|
|
}
|
|
}
|
|
|
|
void Ade7953DrvInit(void)
|
|
{
|
|
if (i2c_flg && (pin[GPIO_ADE7953_IRQ] < 99)) { // Irq on GPIO16 is not supported...
|
|
delay(100); // Need 100mS to init ADE7953
|
|
if (I2cDevice(ADE7953_ADDR)) {
|
|
if (HLW_PREF_PULSE == Settings.energy_power_calibration) {
|
|
Settings.energy_power_calibration = ADE7953_PREF;
|
|
Settings.energy_voltage_calibration = ADE7953_UREF;
|
|
Settings.energy_current_calibration = ADE7953_IREF;
|
|
}
|
|
AddLog_P2(LOG_LEVEL_DEBUG, S_LOG_I2C_FOUND_AT, "ADE7953", ADE7953_ADDR);
|
|
Ade7953.init_step = 2;
|
|
|
|
Energy.phase_count = 2; // Handle two channels as two phases
|
|
Energy.voltage_common = true; // Use common voltage
|
|
|
|
energy_flg = XNRG_07;
|
|
}
|
|
}
|
|
}
|
|
|
|
bool Ade7953Command(void)
|
|
{
|
|
bool serviced = true;
|
|
|
|
uint32_t channel = (2 == XdrvMailbox.index) ? 1 : 0;
|
|
uint32_t value = (uint32_t)(CharToFloat(XdrvMailbox.data) * 100); // 1.23 = 123
|
|
|
|
if (CMND_POWERCAL == Energy.command_code) {
|
|
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_PREF; }
|
|
// Service in xdrv_03_energy.ino
|
|
}
|
|
else if (CMND_VOLTAGECAL == Energy.command_code) {
|
|
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_UREF; }
|
|
// Service in xdrv_03_energy.ino
|
|
}
|
|
else if (CMND_CURRENTCAL == Energy.command_code) {
|
|
if (1 == XdrvMailbox.payload) { XdrvMailbox.payload = ADE7953_IREF; }
|
|
// Service in xdrv_03_energy.ino
|
|
}
|
|
else if (CMND_POWERSET == Energy.command_code) {
|
|
if (XdrvMailbox.data_len && Ade7953.active_power[channel]) {
|
|
if ((value > 100) && (value < 200000)) { // Between 1W and 2000W
|
|
Settings.energy_power_calibration = (Ade7953.active_power[channel] * 1000) / value; // 0.00 W
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_VOLTAGESET == Energy.command_code) {
|
|
if (XdrvMailbox.data_len && Ade7953.voltage_rms) {
|
|
if ((value > 10000) && (value < 26000)) { // Between 100V and 260V
|
|
Settings.energy_voltage_calibration = (Ade7953.voltage_rms * 100) / value; // 0.00 V
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_CURRENTSET == Energy.command_code) {
|
|
if (XdrvMailbox.data_len && Ade7953.current_rms[channel]) {
|
|
if ((value > 2000) && (value < 1000000)) { // Between 20mA and 10A
|
|
Settings.energy_current_calibration = ((Ade7953.current_rms[channel] * 100) / value) * 100; // 0.00 mA
|
|
}
|
|
}
|
|
}
|
|
else serviced = false; // Unknown command
|
|
|
|
return serviced;
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xnrg07(uint8_t function)
|
|
{
|
|
bool result = false;
|
|
|
|
switch (function) {
|
|
case FUNC_ENERGY_EVERY_SECOND:
|
|
Ade7953EnergyEverySecond();
|
|
break;
|
|
case FUNC_COMMAND:
|
|
result = Ade7953Command();
|
|
break;
|
|
case FUNC_PRE_INIT:
|
|
Ade7953DrvInit();
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_ADE7953
|
|
#endif // USE_ENERGY_SENSOR
|
|
#endif // USE_I2C
|