mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_xdrv_driver/xdrv_82_esp32_ethernet.ino

390 lines
13 KiB
C++
Raw Blame History

/*
xdrv_82_esp32_ethernet.ino - ESP32 (PoE) ethernet support for Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef ESP32
#if CONFIG_IDF_TARGET_ESP32
#ifdef USE_ETHERNET
/*********************************************************************************************\
* Ethernet support for ESP32
*
* Dedicated fixed Phy pins
* GPIO17 - EMAC_CLK_OUT_180
* GPIO19 - EMAC_TXD0(RMII)
* GPIO21 - EMAC_TX_EN(RMII)
* GPIO22 - EMAC_TXD1(RMII)
* GPIO25 - EMAC_RXD0(RMII)
* GPIO26 - EMAC_RXD1(RMII)
* GPIO27 - EMAC_RX_CRS_DV
*
* {"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
* GPIO12 = ETH POWER
* GPIO18 = ETH MDIO
* GPIO23 = ETH MDC
* #define ETH_TYPE ETH_PHY_LAN8720
* #define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
* #define ETH_ADDRESS 0
*
* {"NAME":"wESP32","GPIO":[0,0,1,0,1,1,0,0,1,1,1,1,5568,5600,1,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
* GPIO16 = ETH MDC
* GPIO17 = ETH MDIO
* #define ETH_TYPE ETH_PHY_LAN8720
* #define ETH_CLKMODE ETH_CLOCK_GPIO0_IN
* #define ETH_ADDRESS 0
*
* {"NAME":"WT32-ETH01","GPIO":[1,1,1,1,1,1,0,0,1,0,1,1,3840,576,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,1],"FLAG":0,"BASE":1}
* GPIO16 = Force Hi
* GPIO18 = ETH MDIO
* GPIO23 = ETH MDC
* #define ETH_TYPE ETH_PHY_LAN8720
* #define ETH_CLKMODE ETH_CLOCK_GPIO0_IN
* #define ETH_ADDRESS 1
*
\*********************************************************************************************/
#define XDRV_82 82
/*
// Olimex ESP32-PoE
#define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
#define ETH_POWER_PIN 12
//********************************************************************************************
#ifndef ETH_ADDRESS
#define ETH_ADDRESS 0 // ETH.h uint8_t: 0 = PHY0 .. 31 = PHY31
#endif
#ifndef ETH_TYPE
#define ETH_TYPE ETH_PHY_LAN8720 // ETH.h eth_phy_type_t: 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110/ETH_PHY_IP101, 2 = ETH_PHY_RTL8201, 3 = ETH_PHY_DP83848, 4 = ETH_PHY_DM9051, 5 = ETH_PHY_KSZ8081
#endif
#ifndef ETH_CLKMODE
#define ETH_CLKMODE ETH_CLOCK_GPIO0_IN // ETH.h eth_clock_mode_t: 0 = ETH_CLOCK_GPIO0_IN, 1 = ETH_CLOCK_GPIO0_OUT, 2 = ETH_CLOCK_GPIO16_OUT, 3 = ETH_CLOCK_GPIO17_OUT
#endif
*/
#include <ETH.h>
char eth_hostname[sizeof(TasmotaGlobal.hostname)];
uint8_t eth_config_change;
void EthernetEvent(arduino_event_t *event);
void EthernetEvent(arduino_event_t *event) {
switch (event->event_id) {
case ARDUINO_EVENT_ETH_START:
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_ETH D_ATTEMPTING_CONNECTION));
ETH.setHostname(eth_hostname);
break;
case ARDUINO_EVENT_ETH_CONNECTED:
#ifdef USE_IPV6
ETH.enableIpV6(); // enable Link-Local
#endif // USE_IPV6
AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_ETH D_CONNECTED " at %dMbps%s, Mac %s, Hostname %s"),
ETH.linkSpeed(), (ETH.fullDuplex()) ? " Full Duplex" : "",
ETH.macAddress().c_str(), eth_hostname
);
// AddLog(LOG_LEVEL_DEBUG, D_LOG_ETH "ETH.enableIpV6() -> %i", ETH.enableIpV6());
break;
case ARDUINO_EVENT_ETH_GOT_IP:
// AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_ETH "Mac %s, IPAddress %_I, Hostname %s"),
// ETH.macAddress().c_str(), (uint32_t)ETH.localIP(), eth_hostname);
Settings->eth_ipv4_address[1] = (uint32_t)ETH.gatewayIP();
Settings->eth_ipv4_address[2] = (uint32_t)ETH.subnetMask();
if (0 == Settings->eth_ipv4_address[0]) { // At this point ETH.dnsIP() are NOT correct unless DHCP
Settings->eth_ipv4_address[3] = (uint32_t)ETH.dnsIP();
Settings->eth_ipv4_address[4] = (uint32_t)ETH.dnsIP(1);
}
TasmotaGlobal.rules_flag.eth_connected = 1;
TasmotaGlobal.global_state.eth_down = 0;
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: IPv4 %_I, mask %_I, gateway %_I"),
event->event_info.got_ip.ip_info.ip.addr,
event->event_info.got_ip.ip_info.netmask.addr,
event->event_info.got_ip.ip_info.gw.addr);
WiFi.scrubDNS(); // internal calls to reconnect can zero the DNS servers, save DNS for future use
break;
#ifdef USE_IPV6
case ARDUINO_EVENT_ETH_GOT_IP6:
{
ip_addr_t ip_addr6;
ip_addr_copy_from_ip6(ip_addr6, event->event_info.got_ip6.ip6_info.ip);
IPAddress addr(ip_addr6);
AddLog(LOG_LEVEL_DEBUG, PSTR("%s: IPv6 %s %s"),
event->event_id == ARDUINO_EVENT_ETH_GOT_IP6 ? "ETH" : "WIF",
addr.isLocal() ? PSTR("Local") : PSTR("Global"), addr.toString().c_str());
if (!addr.isLocal()) { // declare network up on IPv6
TasmotaGlobal.rules_flag.eth_connected = 1;
TasmotaGlobal.global_state.eth_down = 0;
}
WiFi.scrubDNS(); // internal calls to reconnect can zero the DNS servers, save DNS for future use
}
break;
#endif // USE_IPV6
case ARDUINO_EVENT_ETH_DISCONNECTED:
AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_ETH "Disconnected"));
TasmotaGlobal.rules_flag.eth_disconnected = 1;
TasmotaGlobal.global_state.eth_down = 1;
break;
case ARDUINO_EVENT_ETH_STOP:
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_ETH "Stopped"));
TasmotaGlobal.global_state.eth_down = 1;
break;
default:
break;
}
}
void EthernetSetIp(void) {
// Set static IP
ETH.config(Settings->eth_ipv4_address[0], // IPAddress local_ip
Settings->eth_ipv4_address[1], // IPAddress gateway
Settings->eth_ipv4_address[2], // IPAddress subnet
Settings->eth_ipv4_address[3], // IPAddress dns1
Settings->eth_ipv4_address[4]); // IPAddress dns2
}
void EthernetInit(void) {
if (!Settings->flag4.network_ethernet) { return; }
if (!PinUsed(GPIO_ETH_PHY_MDC) && !PinUsed(GPIO_ETH_PHY_MDIO)) {
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_ETH "No ETH MDC and/or ETH MDIO GPIO defined"));
return;
}
eth_config_change = 0;
if (WT32_ETH01 == TasmotaGlobal.module_type) {
Settings->eth_address = 1; // EthAddress
Settings->eth_type = ETH_PHY_LAN8720; // EthType
Settings->eth_clk_mode = ETH_CLOCK_GPIO0_IN; // EthClockMode
}
// snprintf_P(Eth.hostname, sizeof(Eth.hostname), PSTR("%s-eth"), TasmotaGlobal.hostname);
strlcpy(eth_hostname, TasmotaGlobal.hostname, sizeof(eth_hostname) -5); // Make sure there is room for "-eth"
strcat(eth_hostname, "-eth");
WiFi.onEvent(EthernetEvent);
int eth_power = Pin(GPIO_ETH_PHY_POWER);
int eth_mdc = Pin(GPIO_ETH_PHY_MDC);
int eth_mdio = Pin(GPIO_ETH_PHY_MDIO);
//#if CONFIG_IDF_TARGET_ESP32
// fix an disconnection issue after rebooting Olimex POE - this forces a clean state for all GPIO involved in RMII
// gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_POWER);
// gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_MDC);
// gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_MDIO);
// gpio_reset_pin(GPIO_NUM_19); // EMAC_TXD0 - hardcoded
// gpio_reset_pin(GPIO_NUM_21); // EMAC_TX_EN - hardcoded
// gpio_reset_pin(GPIO_NUM_22); // EMAC_TXD1 - hardcoded
// gpio_reset_pin(GPIO_NUM_25); // EMAC_RXD0 - hardcoded
// gpio_reset_pin(GPIO_NUM_26); // EMAC_RXD1 - hardcoded
// gpio_reset_pin(GPIO_NUM_27); // EMAC_RX_CRS_DV - hardcoded
// switch (Settings->eth_clk_mode) {
// case 0: // ETH_CLOCK_GPIO0_IN
// case 1: // ETH_CLOCK_GPIO0_OUT
// gpio_reset_pin(GPIO_NUM_0);
// break;
// case 2: // ETH_CLOCK_GPIO16_OUT
// gpio_reset_pin(GPIO_NUM_16);
// break;
// case 3: // ETH_CLOCK_GPIO17_OUT
// gpio_reset_pin(GPIO_NUM_17);
// break;
// }
// delay(1);
//#endif // CONFIG_IDF_TARGET_ESP32
if (!ETH.begin(Settings->eth_address, eth_power, eth_mdc, eth_mdio, (eth_phy_type_t)Settings->eth_type, (eth_clock_mode_t)Settings->eth_clk_mode)) {
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_ETH "Bad PHY type or init error"));
return;
};
if (Settings->eth_ipv4_address[0]) {
EthernetSetIp(); // Set static IP
}
}
IPAddress EthernetLocalIP(void) {
return ETH.localIP();
}
// Check to see if we have any routable IP address
// IPv4 has always priority
// Copy the value of the IP if pointer provided (optional)
bool EthernetGetIP(IPAddress *ip) {
#ifdef USE_IPV6
if ((uint32_t)ETH.localIP() != 0) {
if (ip != nullptr) { *ip = ETH.localIP(); }
return true;
}
IPAddress lip;
if (EthernetGetIPv6(&lip)) {
if (ip != nullptr) { *ip = lip; }
return true;
}
if (ip != nullptr) { *ip = IPAddress(); }
return false;
#else
// IPv4 only
if (ip != nullptr) { *ip = ETH.localIP(); }
return (uint32_t)ETH.localIP() != 0;
#endif // USE_IPV6
}
bool EthernetHasIP(void) {
return EthernetGetIP(nullptr);
}
String EthernetGetIPStr(void) {
IPAddress ip;
if (EthernetGetIP(&ip)) {
return ip.toString();
} else {
return String();
}
}
char* EthernetHostname(void) {
return eth_hostname;
}
String EthernetMacAddress(void) {
return ETH.macAddress();
}
void EthernetConfigChange(void) {
if (eth_config_change) {
eth_config_change--;
if (!eth_config_change) {
EthernetSetIp();
}
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
#define D_CMND_ETHADDRESS "Address"
#define D_CMND_ETHTYPE "Type"
#define D_CMND_ETHCLOCKMODE "ClockMode"
#define D_CMND_ETHIPADDRESS D_CMND_IPADDRESS
#define D_CMND_ETHGATEWAY D_JSON_GATEWAY
#define D_CMND_ETHNETMASK D_JSON_SUBNETMASK
#define D_CMND_ETHDNS D_JSON_DNSSERVER
const char kEthernetCommands[] PROGMEM = "Eth|" // Prefix
"ernet|" D_CMND_ETHADDRESS "|" D_CMND_ETHTYPE "|" D_CMND_ETHCLOCKMODE "|"
D_CMND_ETHIPADDRESS "|" D_CMND_ETHGATEWAY "|" D_CMND_ETHNETMASK "|" D_CMND_ETHDNS ;
void (* const EthernetCommand[])(void) PROGMEM = {
&CmndEthernet, &CmndEthAddress, &CmndEthType, &CmndEthClockMode,
&CmndEthSetIpConfig, &CmndEthSetIpConfig, &CmndEthSetIpConfig, &CmndEthSetIpConfig };
#define ETH_PARAM_OFFSET 4 // Offset of command index in above table of first CmndEthIpConfig
void CmndEthernet(void) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
Settings->flag4.network_ethernet = XdrvMailbox.payload;
TasmotaGlobal.restart_flag = 2;
}
ResponseCmndStateText(Settings->flag4.network_ethernet);
}
void CmndEthAddress(void) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 31)) {
Settings->eth_address = XdrvMailbox.payload;
TasmotaGlobal.restart_flag = 2;
}
ResponseCmndNumber(Settings->eth_address);
}
void CmndEthType(void) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 8)) {
Settings->eth_type = XdrvMailbox.payload;
TasmotaGlobal.restart_flag = 2;
}
ResponseCmndNumber(Settings->eth_type);
}
void CmndEthClockMode(void) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 3)) {
Settings->eth_clk_mode = XdrvMailbox.payload;
TasmotaGlobal.restart_flag = 2;
}
ResponseCmndNumber(Settings->eth_clk_mode);
}
void CmndEthSetIpConfig(void) {
uint32_t param_id = XdrvMailbox.command_code -ETH_PARAM_OFFSET;
char cmnd_idx[2] = { 0 };
if (3 == param_id) { // EthDnsServer
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > 2)) {
XdrvMailbox.index = 1;
}
cmnd_idx[0] = '0' + XdrvMailbox.index;
param_id += XdrvMailbox.index -1; // EthDnsServer2
}
if (XdrvMailbox.data_len) {
uint32_t ipv4_address;
if (ParseIPv4(&ipv4_address, XdrvMailbox.data)) {
Settings->eth_ipv4_address[param_id] = ipv4_address;
eth_config_change = 2;
}
}
char network_address[22] = { 0 };
if (0 == param_id) {
if (!Settings->eth_ipv4_address[0]) {
ext_snprintf_P(network_address, sizeof(network_address), PSTR(" (%_I)"), (uint32_t)ETH.localIP());
}
}
Response_P(PSTR("{\"%s%s\":\"%_I%s\"}"), XdrvMailbox.command, cmnd_idx, Settings->eth_ipv4_address[param_id], network_address);
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv82(uint32_t function) {
bool result = false;
switch (function) {
case FUNC_EVERY_SECOND:
EthernetConfigChange();
break;
case FUNC_COMMAND:
result = DecodeCommand(kEthernetCommands, EthernetCommand);
break;
case FUNC_INIT:
EthernetInit();
break;
}
return result;
}
#endif // USE_ETHERNET
#endif // CONFIG_IDF_TARGET_ESP32
#endif // ESP32
Reference in New Issue View Git Blame Copy Permalink