mirror of https://github.com/arendst/Tasmota.git
320 lines
11 KiB
C++
320 lines
11 KiB
C++
/*
|
|
xdrv_82_esp32_ethernet.ino - ESP32 (PoE) ethernet support for Tasmota
|
|
|
|
Copyright (C) 2021 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef ESP32
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#ifdef USE_ETHERNET
|
|
/*********************************************************************************************\
|
|
* Ethernet support for ESP32
|
|
*
|
|
* Dedicated fixed Phy pins
|
|
* GPIO17 - EMAC_CLK_OUT_180
|
|
* GPIO19 - EMAC_TXD0(RMII)
|
|
* GPIO21 - EMAC_TX_EN(RMII)
|
|
* GPIO22 - EMAC_TXD1(RMII)
|
|
* GPIO25 - EMAC_RXD0(RMII)
|
|
* GPIO26 - EMAC_RXD1(RMII)
|
|
* GPIO27 - EMAC_RX_CRS_DV
|
|
*
|
|
* {"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
* GPIO12 = ETH POWER
|
|
* GPIO18 = ETH MDIO
|
|
* GPIO23 = ETH MDC
|
|
* #define ETH_TYPE ETH_PHY_LAN8720
|
|
* #define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
|
|
* #define ETH_ADDRESS 0
|
|
*
|
|
* {"NAME":"wESP32","GPIO":[0,0,1,0,1,1,0,0,1,1,1,1,5568,5600,1,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
* GPIO16 = ETH MDC
|
|
* GPIO17 = ETH MDIO
|
|
* #define ETH_TYPE ETH_PHY_LAN8720
|
|
* #define ETH_CLKMODE ETH_CLOCK_GPIO0_IN
|
|
* #define ETH_ADDRESS 0
|
|
*
|
|
* {"NAME":"WT32-ETH01","GPIO":[1,1,1,1,1,1,0,0,1,0,1,1,3840,576,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,1],"FLAG":0,"BASE":1}
|
|
* GPIO16 = Force Hi
|
|
* GPIO18 = ETH MDIO
|
|
* GPIO23 = ETH MDC
|
|
* #define ETH_TYPE ETH_PHY_LAN8720
|
|
* #define ETH_CLKMODE ETH_CLOCK_GPIO0_IN
|
|
* #define ETH_ADDRESS 1
|
|
*
|
|
\*********************************************************************************************/
|
|
|
|
#define XDRV_82 82
|
|
|
|
/*
|
|
// Olimex ESP32-PoE
|
|
#define ETH_CLKMODE ETH_CLOCK_GPIO17_OUT
|
|
#define ETH_POWER_PIN 12
|
|
|
|
//********************************************************************************************
|
|
|
|
#ifndef ETH_ADDRESS
|
|
#define ETH_ADDRESS 0 // ETH.h uint8_t: 0 = PHY0 .. 31 = PHY31
|
|
#endif
|
|
|
|
#ifndef ETH_TYPE
|
|
#define ETH_TYPE ETH_PHY_LAN8720 // ETH.h eth_phy_type_t: 0 = ETH_PHY_LAN8720, 1 = ETH_PHY_TLK110/ETH_PHY_IP101, 2 = ETH_PHY_RTL8201, 3 = ETH_PHY_DP83848, 4 = ETH_PHY_DM9051, 5 = ETH_PHY_KSZ8081
|
|
|
|
#endif
|
|
|
|
#ifndef ETH_CLKMODE
|
|
#define ETH_CLKMODE ETH_CLOCK_GPIO0_IN // ETH.h eth_clock_mode_t: 0 = ETH_CLOCK_GPIO0_IN, 1 = ETH_CLOCK_GPIO0_OUT, 2 = ETH_CLOCK_GPIO16_OUT, 3 = ETH_CLOCK_GPIO17_OUT
|
|
#endif
|
|
*/
|
|
|
|
#include <ETH.h>
|
|
|
|
char eth_hostname[sizeof(TasmotaGlobal.hostname)];
|
|
uint8_t eth_config_change;
|
|
|
|
void EthernetEvent(WiFiEvent_t event) {
|
|
switch (event) {
|
|
case ARDUINO_EVENT_ETH_START:
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: " D_ATTEMPTING_CONNECTION));
|
|
ETH.setHostname(eth_hostname);
|
|
break;
|
|
case ARDUINO_EVENT_ETH_CONNECTED:
|
|
AddLog(LOG_LEVEL_INFO, PSTR("ETH: " D_CONNECTED " at %dMbps%s"),
|
|
ETH.linkSpeed(), (ETH.fullDuplex()) ? " Full Duplex" : "");
|
|
break;
|
|
case ARDUINO_EVENT_ETH_GOT_IP:
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: Mac %s, IPAddress %_I, Hostname %s"),
|
|
ETH.macAddress().c_str(), (uint32_t)ETH.localIP(), eth_hostname);
|
|
Settings->eth_ipv4_address[1] = (uint32_t)ETH.gatewayIP();
|
|
Settings->eth_ipv4_address[2] = (uint32_t)ETH.subnetMask();
|
|
if (0 == Settings->eth_ipv4_address[0]) { // At this point ETH.dnsIP() are NOT correct unless DHCP
|
|
Settings->eth_ipv4_address[3] = (uint32_t)ETH.dnsIP();
|
|
Settings->eth_ipv4_address[4] = (uint32_t)ETH.dnsIP(1);
|
|
}
|
|
TasmotaGlobal.rules_flag.eth_connected = 1;
|
|
TasmotaGlobal.global_state.eth_down = 0;
|
|
break;
|
|
case ARDUINO_EVENT_ETH_DISCONNECTED:
|
|
AddLog(LOG_LEVEL_INFO, PSTR("ETH: Disconnected"));
|
|
TasmotaGlobal.rules_flag.eth_disconnected = 1;
|
|
TasmotaGlobal.global_state.eth_down = 1;
|
|
break;
|
|
case ARDUINO_EVENT_ETH_STOP:
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: Stopped"));
|
|
TasmotaGlobal.global_state.eth_down = 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void EthernetSetIp(void) {
|
|
// Set static IP
|
|
ETH.config(Settings->eth_ipv4_address[0], // IPAddress local_ip
|
|
Settings->eth_ipv4_address[1], // IPAddress gateway
|
|
Settings->eth_ipv4_address[2], // IPAddress subnet
|
|
Settings->eth_ipv4_address[3], // IPAddress dns1
|
|
Settings->eth_ipv4_address[4]); // IPAddress dns2
|
|
}
|
|
|
|
void EthernetInit(void) {
|
|
if (!Settings->flag4.network_ethernet) { return; }
|
|
if (!PinUsed(GPIO_ETH_PHY_MDC) && !PinUsed(GPIO_ETH_PHY_MDIO)) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: No ETH MDC and/or ETH MDIO GPIO defined"));
|
|
return;
|
|
}
|
|
|
|
eth_config_change = 0;
|
|
|
|
if (WT32_ETH01 == TasmotaGlobal.module_type) {
|
|
Settings->eth_address = 1; // EthAddress
|
|
Settings->eth_type = ETH_PHY_LAN8720; // EthType
|
|
Settings->eth_clk_mode = ETH_CLOCK_GPIO0_IN; // EthClockMode
|
|
}
|
|
|
|
// snprintf_P(Eth.hostname, sizeof(Eth.hostname), PSTR("%s-eth"), TasmotaGlobal.hostname);
|
|
strlcpy(eth_hostname, TasmotaGlobal.hostname, sizeof(eth_hostname) -5); // Make sure there is room for "-eth"
|
|
strcat(eth_hostname, "-eth");
|
|
|
|
WiFi.onEvent(EthernetEvent);
|
|
|
|
int eth_power = Pin(GPIO_ETH_PHY_POWER);
|
|
int eth_mdc = Pin(GPIO_ETH_PHY_MDC);
|
|
int eth_mdio = Pin(GPIO_ETH_PHY_MDIO);
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
// fix an disconnection issue after rebooting Olimex POE - this forces a clean state for all GPIO involved in RMII
|
|
gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_POWER);
|
|
gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_MDC);
|
|
gpio_reset_pin((gpio_num_t)GPIO_ETH_PHY_MDIO);
|
|
gpio_reset_pin(GPIO_NUM_19); // EMAC_TXD0 - hardcoded
|
|
gpio_reset_pin(GPIO_NUM_21); // EMAC_TX_EN - hardcoded
|
|
gpio_reset_pin(GPIO_NUM_22); // EMAC_TXD1 - hardcoded
|
|
gpio_reset_pin(GPIO_NUM_25); // EMAC_RXD0 - hardcoded
|
|
gpio_reset_pin(GPIO_NUM_26); // EMAC_RXD1 - hardcoded
|
|
gpio_reset_pin(GPIO_NUM_27); // EMAC_RX_CRS_DV - hardcoded
|
|
switch (Settings->eth_clk_mode) {
|
|
case 0: // ETH_CLOCK_GPIO0_IN
|
|
case 1: // ETH_CLOCK_GPIO0_OUT
|
|
gpio_reset_pin(GPIO_NUM_0);
|
|
break;
|
|
case 2: // ETH_CLOCK_GPIO16_OUT
|
|
gpio_reset_pin(GPIO_NUM_16);
|
|
break;
|
|
case 3: // ETH_CLOCK_GPIO17_OUT
|
|
gpio_reset_pin(GPIO_NUM_17);
|
|
break;
|
|
}
|
|
delay(1);
|
|
#endif // CONFIG_IDF_TARGET_ESP32
|
|
if (!ETH.begin(Settings->eth_address, eth_power, eth_mdc, eth_mdio, (eth_phy_type_t)Settings->eth_type, (eth_clock_mode_t)Settings->eth_clk_mode)) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("ETH: Bad PHY type or init error"));
|
|
return;
|
|
};
|
|
|
|
if (Settings->eth_ipv4_address[0]) {
|
|
EthernetSetIp(); // Set static IP
|
|
}
|
|
}
|
|
|
|
IPAddress EthernetLocalIP(void) {
|
|
return ETH.localIP();
|
|
}
|
|
|
|
char* EthernetHostname(void) {
|
|
return eth_hostname;
|
|
}
|
|
|
|
String EthernetMacAddress(void) {
|
|
return ETH.macAddress();
|
|
}
|
|
|
|
void EthernetConfigChange(void) {
|
|
if (eth_config_change) {
|
|
eth_config_change--;
|
|
if (!eth_config_change) {
|
|
EthernetSetIp();
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Commands
|
|
\*********************************************************************************************/
|
|
|
|
#define D_CMND_ETHADDRESS "Address"
|
|
#define D_CMND_ETHTYPE "Type"
|
|
#define D_CMND_ETHCLOCKMODE "ClockMode"
|
|
#define D_CMND_ETHIPADDRESS D_CMND_IPADDRESS
|
|
#define D_CMND_ETHGATEWAY D_JSON_GATEWAY
|
|
#define D_CMND_ETHNETMASK D_JSON_SUBNETMASK
|
|
#define D_CMND_ETHDNS D_JSON_DNSSERVER
|
|
|
|
const char kEthernetCommands[] PROGMEM = "Eth|" // Prefix
|
|
"ernet|" D_CMND_ETHADDRESS "|" D_CMND_ETHTYPE "|" D_CMND_ETHCLOCKMODE "|"
|
|
D_CMND_ETHIPADDRESS "|" D_CMND_ETHGATEWAY "|" D_CMND_ETHNETMASK "|" D_CMND_ETHDNS ;
|
|
|
|
void (* const EthernetCommand[])(void) PROGMEM = {
|
|
&CmndEthernet, &CmndEthAddress, &CmndEthType, &CmndEthClockMode,
|
|
&CmndEthSetIpConfig, &CmndEthSetIpConfig, &CmndEthSetIpConfig, &CmndEthSetIpConfig };
|
|
|
|
#define ETH_PARAM_OFFSET 4 // Offset of command index in above table of first CmndEthIpConfig
|
|
|
|
void CmndEthernet(void) {
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
|
|
Settings->flag4.network_ethernet = XdrvMailbox.payload;
|
|
TasmotaGlobal.restart_flag = 2;
|
|
}
|
|
ResponseCmndStateText(Settings->flag4.network_ethernet);
|
|
}
|
|
|
|
void CmndEthAddress(void) {
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 31)) {
|
|
Settings->eth_address = XdrvMailbox.payload;
|
|
TasmotaGlobal.restart_flag = 2;
|
|
}
|
|
ResponseCmndNumber(Settings->eth_address);
|
|
}
|
|
|
|
void CmndEthType(void) {
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 2)) {
|
|
Settings->eth_type = XdrvMailbox.payload;
|
|
TasmotaGlobal.restart_flag = 2;
|
|
}
|
|
ResponseCmndNumber(Settings->eth_type);
|
|
}
|
|
|
|
void CmndEthClockMode(void) {
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 3)) {
|
|
Settings->eth_clk_mode = XdrvMailbox.payload;
|
|
TasmotaGlobal.restart_flag = 2;
|
|
}
|
|
ResponseCmndNumber(Settings->eth_clk_mode);
|
|
}
|
|
|
|
void CmndEthSetIpConfig(void) {
|
|
uint32_t param_id = XdrvMailbox.command_code -ETH_PARAM_OFFSET;
|
|
|
|
char cmnd_idx[2] = { 0 };
|
|
if (3 == param_id) { // EthDnsServer
|
|
if ((XdrvMailbox.index < 1) || (XdrvMailbox.index > 2)) {
|
|
XdrvMailbox.index = 1;
|
|
}
|
|
cmnd_idx[0] = '0' + XdrvMailbox.index;
|
|
param_id += XdrvMailbox.index -1; // EthDnsServer2
|
|
}
|
|
|
|
if (XdrvMailbox.data_len) {
|
|
uint32_t ipv4_address;
|
|
if (ParseIPv4(&ipv4_address, XdrvMailbox.data)) {
|
|
Settings->eth_ipv4_address[param_id] = ipv4_address;
|
|
eth_config_change = 2;
|
|
}
|
|
}
|
|
|
|
char network_address[22] = { 0 };
|
|
if (0 == param_id) {
|
|
if (!Settings->eth_ipv4_address[0]) {
|
|
ext_snprintf_P(network_address, sizeof(network_address), PSTR(" (%_I)"), (uint32_t)ETH.localIP());
|
|
}
|
|
}
|
|
Response_P(PSTR("{\"%s%s\":\"%_I%s\"}"), XdrvMailbox.command, cmnd_idx, Settings->eth_ipv4_address[param_id], network_address);
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xdrv82(uint32_t function) {
|
|
bool result = false;
|
|
|
|
switch (function) {
|
|
case FUNC_EVERY_SECOND:
|
|
EthernetConfigChange();
|
|
break;
|
|
case FUNC_COMMAND:
|
|
result = DecodeCommand(kEthernetCommands, EthernetCommand);
|
|
break;
|
|
case FUNC_INIT:
|
|
EthernetInit();
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_ETHERNET
|
|
#endif // CONFIG_IDF_TARGET_ESP32
|
|
#endif // ESP32
|