mirror of https://github.com/arendst/Tasmota.git
218 lines
7.5 KiB
C
218 lines
7.5 KiB
C
/*
|
|
digital.c - wiring digital implementation for esp8266
|
|
|
|
Copyright (c) 2015 Hristo Gochkov. All rights reserved.
|
|
This file is part of the esp8266 core for Arduino environment.
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
// Use PWM from core 2.4.0 as all versions below 2.5.0-beta3 produce LED flickering when settings are saved to flash
|
|
#include <core_version.h>
|
|
#if defined(ARDUINO_ESP8266_RELEASE_2_3_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_1) || defined(ARDUINO_ESP8266_RELEASE_2_4_2)
|
|
#warning **** Tasmota is using v2.4.0 wiring_digital.c as planned ****
|
|
|
|
#define ARDUINO_MAIN
|
|
#include "wiring_private.h"
|
|
#include "pins_arduino.h"
|
|
#include "c_types.h"
|
|
#include "eagle_soc.h"
|
|
#include "ets_sys.h"
|
|
|
|
extern void pwm_stop_pin(uint8_t pin);
|
|
|
|
uint8_t esp8266_gpioToFn[16] = {0x34, 0x18, 0x38, 0x14, 0x3C, 0x40, 0x1C, 0x20, 0x24, 0x28, 0x2C, 0x30, 0x04, 0x08, 0x0C, 0x10};
|
|
|
|
extern void __pinMode(uint8_t pin, uint8_t mode) {
|
|
pwm_stop_pin(pin);
|
|
if(pin < 16){
|
|
if(mode == SPECIAL){
|
|
GPC(pin) = (GPC(pin) & (0xF << GPCI)); //SOURCE(GPIO) | DRIVER(NORMAL) | INT_TYPE(UNCHANGED) | WAKEUP_ENABLE(DISABLED)
|
|
GPEC = (1 << pin); //Disable
|
|
GPF(pin) = GPFFS(GPFFS_BUS(pin));//Set mode to BUS (RX0, TX0, TX1, SPI, HSPI or CLK depending in the pin)
|
|
if(pin == 3) GPF(pin) |= (1 << GPFPU);//enable pullup on RX
|
|
} else if(mode & FUNCTION_0){
|
|
GPC(pin) = (GPC(pin) & (0xF << GPCI)); //SOURCE(GPIO) | DRIVER(NORMAL) | INT_TYPE(UNCHANGED) | WAKEUP_ENABLE(DISABLED)
|
|
GPEC = (1 << pin); //Disable
|
|
GPF(pin) = GPFFS((mode >> 4) & 0x07);
|
|
if(pin == 13 && mode == FUNCTION_4) GPF(pin) |= (1 << GPFPU);//enable pullup on RX
|
|
} else if(mode == OUTPUT || mode == OUTPUT_OPEN_DRAIN){
|
|
GPF(pin) = GPFFS(GPFFS_GPIO(pin));//Set mode to GPIO
|
|
GPC(pin) = (GPC(pin) & (0xF << GPCI)); //SOURCE(GPIO) | DRIVER(NORMAL) | INT_TYPE(UNCHANGED) | WAKEUP_ENABLE(DISABLED)
|
|
if(mode == OUTPUT_OPEN_DRAIN) GPC(pin) |= (1 << GPCD);
|
|
GPES = (1 << pin); //Enable
|
|
} else if(mode == INPUT || mode == INPUT_PULLUP){
|
|
GPF(pin) = GPFFS(GPFFS_GPIO(pin));//Set mode to GPIO
|
|
GPEC = (1 << pin); //Disable
|
|
GPC(pin) = (GPC(pin) & (0xF << GPCI)) | (1 << GPCD); //SOURCE(GPIO) | DRIVER(OPEN_DRAIN) | INT_TYPE(UNCHANGED) | WAKEUP_ENABLE(DISABLED)
|
|
if(mode == INPUT_PULLUP) {
|
|
GPF(pin) |= (1 << GPFPU); // Enable Pullup
|
|
}
|
|
} else if(mode == WAKEUP_PULLUP || mode == WAKEUP_PULLDOWN){
|
|
GPF(pin) = GPFFS(GPFFS_GPIO(pin));//Set mode to GPIO
|
|
GPEC = (1 << pin); //Disable
|
|
if(mode == WAKEUP_PULLUP) {
|
|
GPF(pin) |= (1 << GPFPU); // Enable Pullup
|
|
GPC(pin) = (1 << GPCD) | (4 << GPCI) | (1 << GPCWE); //SOURCE(GPIO) | DRIVER(OPEN_DRAIN) | INT_TYPE(LOW) | WAKEUP_ENABLE(ENABLED)
|
|
} else {
|
|
GPF(pin) |= (1 << GPFPD); // Enable Pulldown
|
|
GPC(pin) = (1 << GPCD) | (5 << GPCI) | (1 << GPCWE); //SOURCE(GPIO) | DRIVER(OPEN_DRAIN) | INT_TYPE(HIGH) | WAKEUP_ENABLE(ENABLED)
|
|
}
|
|
}
|
|
} else if(pin == 16){
|
|
GPF16 = GP16FFS(GPFFS_GPIO(pin));//Set mode to GPIO
|
|
GPC16 = 0;
|
|
if(mode == INPUT || mode == INPUT_PULLDOWN_16){
|
|
if(mode == INPUT_PULLDOWN_16){
|
|
GPF16 |= (1 << GP16FPD);//Enable Pulldown
|
|
}
|
|
GP16E &= ~1;
|
|
} else if(mode == OUTPUT){
|
|
GP16E |= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
extern void ICACHE_RAM_ATTR __digitalWrite(uint8_t pin, uint8_t val) {
|
|
pwm_stop_pin(pin);
|
|
if(pin < 16){
|
|
if(val) GPOS = (1 << pin);
|
|
else GPOC = (1 << pin);
|
|
} else if(pin == 16){
|
|
if(val) GP16O |= 1;
|
|
else GP16O &= ~1;
|
|
}
|
|
}
|
|
|
|
extern int ICACHE_RAM_ATTR __digitalRead(uint8_t pin) {
|
|
pwm_stop_pin(pin);
|
|
if(pin < 16){
|
|
return GPIP(pin);
|
|
} else if(pin == 16){
|
|
return GP16I & 0x01;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
GPIO INTERRUPTS
|
|
*/
|
|
|
|
typedef void (*voidFuncPtr)(void);
|
|
typedef void (*voidFuncPtrArg)(void*);
|
|
|
|
typedef struct {
|
|
uint8_t mode;
|
|
void (*fn)(void);
|
|
void * arg;
|
|
} interrupt_handler_t;
|
|
|
|
|
|
static interrupt_handler_t interrupt_handlers[16];
|
|
static uint32_t interrupt_reg = 0;
|
|
|
|
void ICACHE_RAM_ATTR interrupt_handler(void *arg) {
|
|
(void) arg;
|
|
uint32_t status = GPIE;
|
|
GPIEC = status;//clear them interrupts
|
|
uint32_t levels = GPI;
|
|
if(status == 0 || interrupt_reg == 0) return;
|
|
ETS_GPIO_INTR_DISABLE();
|
|
int i = 0;
|
|
uint32_t changedbits = status & interrupt_reg;
|
|
while(changedbits){
|
|
while(!(changedbits & (1 << i))) i++;
|
|
changedbits &= ~(1 << i);
|
|
interrupt_handler_t *handler = &interrupt_handlers[i];
|
|
if (handler->fn &&
|
|
(handler->mode == CHANGE ||
|
|
(handler->mode & 1) == !!(levels & (1 << i)))) {
|
|
// to make ISR compatible to Arduino AVR model where interrupts are disabled
|
|
// we disable them before we call the client ISR
|
|
uint32_t savedPS = xt_rsil(15); // stop other interrupts
|
|
if (handler->arg)
|
|
{
|
|
((voidFuncPtrArg)handler->fn)(handler->arg);
|
|
}
|
|
else
|
|
{
|
|
handler->fn();
|
|
}
|
|
xt_wsr_ps(savedPS);
|
|
}
|
|
}
|
|
ETS_GPIO_INTR_ENABLE();
|
|
}
|
|
|
|
extern void ICACHE_RAM_ATTR __attachInterruptArg(uint8_t pin, voidFuncPtr userFunc, void *arg, int mode) {
|
|
if(pin < 16) {
|
|
ETS_GPIO_INTR_DISABLE();
|
|
interrupt_handler_t *handler = &interrupt_handlers[pin];
|
|
handler->mode = mode;
|
|
handler->fn = userFunc;
|
|
handler->arg = arg;
|
|
interrupt_reg |= (1 << pin);
|
|
GPC(pin) &= ~(0xF << GPCI);//INT mode disabled
|
|
GPIEC = (1 << pin); //Clear Interrupt for this pin
|
|
GPC(pin) |= ((mode & 0xF) << GPCI);//INT mode "mode"
|
|
ETS_GPIO_INTR_ENABLE();
|
|
}
|
|
}
|
|
|
|
extern void ICACHE_RAM_ATTR __attachInterrupt(uint8_t pin, voidFuncPtr userFunc, int mode )
|
|
{
|
|
__attachInterruptArg (pin, userFunc, 0, mode);
|
|
}
|
|
|
|
extern void ICACHE_RAM_ATTR __detachInterrupt(uint8_t pin) {
|
|
if(pin < 16) {
|
|
ETS_GPIO_INTR_DISABLE();
|
|
GPC(pin) &= ~(0xF << GPCI);//INT mode disabled
|
|
GPIEC = (1 << pin); //Clear Interrupt for this pin
|
|
interrupt_reg &= ~(1 << pin);
|
|
interrupt_handler_t *handler = &interrupt_handlers[pin];
|
|
handler->mode = 0;
|
|
handler->fn = 0;
|
|
handler->arg = 0;
|
|
ETS_GPIO_INTR_ENABLE();
|
|
}
|
|
}
|
|
|
|
void initPins(void) {
|
|
//Disable UART interrupts
|
|
system_set_os_print(0);
|
|
U0IE = 0;
|
|
U1IE = 0;
|
|
|
|
for (int i = 0; i <= 5; ++i) {
|
|
pinMode(i, INPUT);
|
|
}
|
|
// pins 6-11 are used for the SPI flash interface
|
|
for (int i = 12; i <= 16; ++i) {
|
|
pinMode(i, INPUT);
|
|
}
|
|
|
|
ETS_GPIO_INTR_ATTACH(interrupt_handler, &interrupt_reg);
|
|
ETS_GPIO_INTR_ENABLE();
|
|
}
|
|
|
|
extern void pinMode(uint8_t pin, uint8_t mode) __attribute__ ((weak, alias("__pinMode")));
|
|
extern void digitalWrite(uint8_t pin, uint8_t val) __attribute__ ((weak, alias("__digitalWrite")));
|
|
extern int digitalRead(uint8_t pin) __attribute__ ((weak, alias("__digitalRead")));
|
|
extern void attachInterrupt(uint8_t pin, voidFuncPtr handler, int mode) __attribute__ ((weak, alias("__attachInterrupt")));
|
|
extern void detachInterrupt(uint8_t pin) __attribute__ ((weak, alias("__detachInterrupt")));
|
|
|
|
#endif // ARDUINO_ESP8266_RELEASE
|