mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xdrv_35_pwm_dimmer.ino

795 lines
28 KiB
C++
Raw Blame History

/*
xdrv_35_pwm_dimmer.ino - PWM Dimmer Switch support for Tasmota
Copyright (C) 2020 Paul C Diem
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_PWM_DIMMER
/*********************************************************************************************\
* Support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM dimmer switches. The brightness of
* the load for these dimmers is controlled by a PWM GPIO pin. Examples are:
*
* https://www.amazon.com/dp/B07FXYSVR1
* https://www.amazon.com/dp/B07V26Q3VD
* https://www.amazon.com/dp/B07K67D43J
* https://www.amazon.com/dp/B07TTGFWFM
*
\*********************************************************************************************/
#define XDRV_35 35
const char kPWMDimmerCommands[] PROGMEM = "|" // No prefix
D_CMND_BRI_PRESET;
void (* const PWMDimmerCommand[])(void) PROGMEM = {
&CmndBriPreset };
#ifdef USE_PWM_DIMMER_REMOTE
struct remote_pwm_dimmer {
power_t power;
uint8_t bri_power_on;
uint8_t bri_preset_low;
uint8_t bri_preset_high;
uint8_t fixed_color_index;
uint8_t bri;
bool power_button_increases_bri;
};
#endif // USE_PWM_DIMMER_REMOTE
uint32_t last_button_press_time;
uint32_t button_hold_time[3];
uint8_t led_timeout_seconds = 0;
uint8_t restore_powered_off_led_counter = 0;
uint8_t power_button_index = 0;
uint8_t down_button_index = 1;
uint8_t buttons_pressed = 0;
uint8_t tap_count = 0;
bool down_button_tapped = false;
bool power_button_increases_bri = true;
bool invert_power_button_bri_direction = false;
bool restore_brightness_leds = false;
bool button_pressed[3] = { false, false, false };
bool button_hold_sent[3];
bool button_hold_processed[3];
#ifdef USE_PWM_DIMMER_REMOTE
struct remote_pwm_dimmer * remote_pwm_dimmers;
struct remote_pwm_dimmer * active_remote_pwm_dimmer;
uint8_t remote_pwm_dimmer_count;
bool active_device_is_local;
#endif // USE_PWM_DIMMER_REMOTE
void PWMModulePreInit(void)
{
Settings.seriallog_level = 0;
Settings.flag.mqtt_serial = 0; // Disable serial logging
Settings.ledstate = 0; // Disable LED usage
// If the module was just changed to PWM Dimmer, set the defaults.
if (Settings.last_module != Settings.module) {
Settings.flag.pwm_control = true; // SetOption15 - Switch between commands PWM or COLOR/DIMMER/CT/CHANNEL
Settings.param[P_HOLD_TIME] = 5; // SetOption32 - Button held for factor times longer
Settings.bri_power_on = Settings.bri_preset_low = Settings.bri_preset_high = 0;
Settings.last_module = Settings.module;
}
// Make sure the brightness level settings are sensible.
if (!Settings.bri_power_on) Settings.bri_power_on = 128;
if (!Settings.bri_preset_low) Settings.bri_preset_low = 10;
if (Settings.bri_preset_high < Settings.bri_preset_low) Settings.bri_preset_high = 255;
PWMDimmerSetPoweredOffLed();
// The relay initializes to on. If the power is supposed to be off, turn the relay off.
if (!power && pin[GPIO_REL1] < 99) digitalWrite(pin[GPIO_REL1], bitRead(rel_inverted, 0) ? 1 : 0);
#ifdef USE_PWM_DIMMER_REMOTE
// If remote device mode is enabled, set the device group count to the number of buttons
// present.
if (Settings.flag4.remote_device_mode) {
Settings.flag4.device_groups_enabled = true;
device_group_count = 0;
for (uint32_t button_index = 0; button_index < MAX_KEYS; button_index++) {
if (pin[GPIO_KEY1 + button_index] < 99) device_group_count++;
}
remote_pwm_dimmer_count = device_group_count - 1;
if (remote_pwm_dimmer_count) {
if ((remote_pwm_dimmers = (struct remote_pwm_dimmer *) calloc(remote_pwm_dimmer_count, sizeof(struct remote_pwm_dimmer))) == nullptr) {
AddLog_P2(LOG_LEVEL_ERROR, PSTR("PWMDimmer: error allocating PWM dimmer array"));
Settings.flag4.remote_device_mode = false;
}
else {
for (uint8_t i = 0; i < remote_pwm_dimmer_count; i++) {
active_remote_pwm_dimmer = &remote_pwm_dimmers[i];
active_remote_pwm_dimmer->bri_power_on = 128;
active_remote_pwm_dimmer->bri_preset_low = 10;
active_remote_pwm_dimmer->bri_preset_high = 255;
}
}
}
}
active_device_is_local = true;
#endif // USE_PWM_DIMMER_REMOTE
}
// operation: 0 = normal, -1 = all off, 1 = all on
void PWMDimmerSetBrightnessLeds(int32_t operation)
{
if (leds_present) {
uint32_t step = (!operation ? 256 / (leds_present + 1) : operation < 0 ? 256 : 0);
uint32_t current_bri = (Light.power ? light_state.getBri() : 0);
uint32_t level = step;
SetLedPowerIdx(0, current_bri >= level);
if (leds_present > 1) {
level += step;
SetLedPowerIdx(1, current_bri >= level);
if (leds_present > 2) {
level += step;
SetLedPowerIdx(2, current_bri >= level);
if (leds_present > 3) {
level += step;
SetLedPowerIdx(3, current_bri >= level);
}
}
}
// If enabled, set the LED timeout.
if (!operation) led_timeout_seconds = (current_bri && Settings.flag4.led_timeout ? 5 : 0);
}
}
void PWMDimmerSetPoweredOffLed(void)
{
// Set the powered-off LED state.
if (pin[GPIO_LEDLNK] < 99) {
bool power_off_led_on = !power && Settings.flag4.powered_off_led;
if (ledlnk_inverted) power_off_led_on ^= 1;
digitalWrite(pin[GPIO_LEDLNK], power_off_led_on);
}
}
void PWMDimmerSetPower(void)
{
DigitalWrite(GPIO_REL1, bitRead(rel_inverted, 0) ? !power : power);
PWMDimmerSetBrightnessLeds(0);
PWMDimmerSetPoweredOffLed();
}
#ifdef USE_DEVICE_GROUPS
void PWMDimmerHandleDevGroupItem(void)
{
uint32_t value = XdrvMailbox.payload;
#ifdef USE_PWM_DIMMER_REMOTE
uint8_t device_group_index = *(uint8_t *)XdrvMailbox.topic;
if (device_group_index > remote_pwm_dimmer_count) return;
bool device_is_local = device_groups[device_group_index].local;
struct remote_pwm_dimmer * remote_pwm_dimmer = &remote_pwm_dimmers[device_group_index];
#else // USE_PWM_DIMMER_REMOTE
if (*(uint8_t *)XdrvMailbox.topic) return;
#endif // !USE_PWM_DIMMER_REMOTE
switch (XdrvMailbox.command_code) {
#ifdef USE_PWM_DIMMER_REMOTE
case DGR_ITEM_LIGHT_BRI:
if (!device_is_local) remote_pwm_dimmer->bri = value;
break;
case DGR_ITEM_POWER:
if (!device_is_local) {
remote_pwm_dimmer->power = value;
remote_pwm_dimmer->power_button_increases_bri = (remote_pwm_dimmer->bri < 128);
}
break;
case DGR_ITEM_LIGHT_FIXED_COLOR:
if (!device_is_local) remote_pwm_dimmer->fixed_color_index = value;
break;
#endif // USE_PWM_DIMMER_REMOTE
case DGR_ITEM_BRI_POWER_ON:
#ifdef USE_PWM_DIMMER_REMOTE
if (!device_is_local)
remote_pwm_dimmer->bri_power_on = value;
else
#endif // USE_PWM_DIMMER_REMOTE
Settings.bri_power_on = value;
break;
case DGR_ITEM_BRI_PRESET_LOW:
#ifdef USE_PWM_DIMMER_REMOTE
if (!device_is_local)
remote_pwm_dimmer->bri_preset_low = value;
else
#endif // USE_PWM_DIMMER_REMOTE
Settings.bri_preset_low = value;
break;
case DGR_ITEM_BRI_PRESET_HIGH:
#ifdef USE_PWM_DIMMER_REMOTE
if (!device_is_local)
remote_pwm_dimmer->bri_preset_high = value;
else
#endif // USE_PWM_DIMMER_REMOTE
Settings.bri_preset_high = value;
break;
case DGR_ITEM_STATUS:
#ifdef USE_PWM_DIMMER_REMOTE
if (device_is_local)
#endif // USE_PWM_DIMMER_REMOTE
SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_BRI_POWER_ON, Settings.bri_power_on,
DGR_ITEM_BRI_PRESET_LOW, Settings.bri_preset_low, DGR_ITEM_BRI_PRESET_HIGH, Settings.bri_preset_high);
break;
}
}
#endif // USE_DEVICE_GROUPS
void PWMDimmerHandleButton(void)
{
/*
* Power Button Up/Down Buttons State Remote Mode Action
* -------------------- ---------------------- ----- ------------ ----------------------------
* Press & release Released Any Any Toggle power
* Hold for hold time Released On Any Brighter/dimmer while held
* then reverse direction
* Hold for hold time Released Off Any Power on at bri preset low
* Hold while Press & release up Any Any Toggle/change options
* Hold while Press & release down Any Any Toggle/change options
* Hold while Press up On Yes Brighter
* Hold while Press down On Yes Dimmer
* Released Hold up On No Brigther
* Released Hold down On No Dimmer
* Released Press & release up Off No Power on at bri preset low
* Released Press & release down Off No Power on at bri preset high
*
* Holding any button for over 10 seconds executes the WiFiConfig 2 command.
*
* In remote mode, whichever button is pressed first becomes the power button and any buttons
* pressed while it is held affect the device associated with it. The up and down buttons change
* depeneding on which button is the current power button:
*
* Power Down Up
* ----- ---- --
* 1 2 3
* 2 1 3
* 3 1 2
*/
// If the button is not pressed and was not just released (the most common case), ...
if (XdrvMailbox.payload && !button_pressed[XdrvMailbox.index]) {
// If no buttons have been pressed for 400ms, reset the button press counts.
if (last_button_press_time && !buttons_pressed && millis() - last_button_press_time > 400) {
last_button_press_time = 0;
tap_count = 0;
}
return;
}
bool state_updated = false;
int8_t bri_offset = 0;
uint8_t power_on_bri = 0;
uint8_t dgr_item = 0;
uint8_t dgr_value;
uint8_t dgr_more_to_come = false;
uint32_t button_index = XdrvMailbox.index;
uint32_t now = millis();
// Initialize some variables.
#ifdef USE_PWM_DIMMER_REMOTE
bool power_is_on = (!active_device_is_local ? active_remote_pwm_dimmer->power : power);
bool is_power_button = (button_index == power_button_index);
#else // USE_PWM_DIMMER_REMOTE
bool power_is_on = power;
bool is_power_button = !button_index;
#endif // USE_PWM_DIMMER_REMOTE
bool is_down_button = (button_index == down_button_index);
// If the button is pressed, ...
if (!XdrvMailbox.payload) {
// If the button was just pressed, flag the button as pressed, clear the hold sent flag and
// increment the buttons pressed count.
if (!button_pressed[button_index]) {
last_button_press_time = now;
button_pressed[button_index] = true;
button_hold_time[button_index] = now + Settings.param[P_HOLD_TIME] * 100;
button_hold_sent[button_index] = false;
buttons_pressed++;
#ifdef USE_PWM_DIMMER_REMOTE
// If there are no other buttons pressed right now and remote mode is enabled, make the device
// associated with this button the device we're going to control.
if (buttons_pressed == 1 && Settings.flag4.remote_device_mode) {
power_button_index = button_index;
down_button_index = (button_index ? 0 : 1);
active_device_is_local = device_groups[power_button_index].local;
if (!active_device_is_local) active_remote_pwm_dimmer = &remote_pwm_dimmers[power_button_index - 1];
}
#endif // USE_PWM_DIMMER_REMOTE
return;
}
// If the button is being held, ...
if (button_hold_time[button_index] < now) {
// If the power button is not also pressed and the button has been held for over 10 seconds,
// execute the WiFiConfig 2 command.
if (!button_pressed[power_button_index] && now - button_hold_time[button_index] > 10000) {
button_hold_time[button_index] = now + 90000;
char scmnd[20];
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_WIFICONFIG " 2"));
ExecuteCommand(scmnd, SRC_BUTTON);
return;
}
// Send a button hold if we haven't already. If it is handled (by the button topic or by a
// rule), ignore the this button until it's released.
if (!button_hold_sent[button_index]) {
button_hold_sent[button_index] = true;
button_hold_processed[button_index] = (!is_power_button && tap_count ? false : SendKey(KEY_BUTTON, button_index + 1, POWER_HOLD));
}
if (!button_hold_processed[button_index]) {
// If this is about the power button, ...
if (is_power_button) {
// If no other buttons are pressed, ...
if (buttons_pressed == 1) {
// If the power is on, adjust the brightness. Set the direction based on the current
// direction for the device and then invert the direction when the power button is
// released. The new brightness will be calculated below.
if (power_is_on) {
#ifdef USE_PWM_DIMMER_REMOTE
bri_offset = (!active_device_is_local ? (active_remote_pwm_dimmer->power_button_increases_bri ? 1 : -1) : (power_button_increases_bri ? 1 : -1));
#else // USE_PWM_DIMMER_REMOTE
bri_offset = (power_button_increases_bri ? 1 : -1);
#endif // USE_PWM_DIMMER_REMOTE
invert_power_button_bri_direction = true;
}
// If the power is not on, turn it on using an initial brightness of bri_preset_low and
// set the power button hold time to delay before we start increasing the brightness.
else {
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
power_on_bri = active_remote_pwm_dimmer->bri = active_remote_pwm_dimmer->bri_preset_low;
else
#endif // USE_PWM_DIMMER_REMOTE
power_on_bri = Settings.bri_preset_low;
button_hold_time[button_index] = now + 500;
}
}
}
// If this is about the down or up buttons, ...
else {
// If the power is on and the up or down button was not tapped while holding the power
// button before this, adjust the brightness. Set the direction based on which button is
// pressed. The new brightness will be calculated below.
if (power_is_on && !tap_count) {
bri_offset = (is_down_button ? -1 : 1);
}
else {
uint8_t mqtt_trigger = 0;
// If the up or down button was tapped while holding the power button before this,
// handle the operation.
if (tap_count) {
// Send a device group update to select the previous/next fixed color.
if (down_button_tapped) {
#ifdef USE_DEVICE_GROUPS
uint8_t uint8_value;
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
uint8_value = active_remote_pwm_dimmer->fixed_color_index;
else
#endif // USE_PWM_DIMMER_REMOTE
uint8_value = Light.fixed_color_index;
if (is_down_button)
uint8_value--;
else
uint8_value++;
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
active_remote_pwm_dimmer->fixed_color_index = uint8_value;
else
#endif // USE_PWM_DIMMER_REMOTE
Light.fixed_color_index = uint8_value;
dgr_item = DGR_ITEM_LIGHT_FIXED_COLOR;
dgr_value = uint8_value;
dgr_more_to_come = true;
#endif // USE_DEVICE_GROUPS
;
}
// Publish MQTT Event Trigger#.
else {
mqtt_trigger = (is_down_button ? 3 : 4);
}
}
// If the power is not on, publish MQTT Event Trigger#.
else if (!power_is_on) {
mqtt_trigger = (is_down_button ? 1 : 2);
}
// If we need to publish an MQTT trigger, do it.
if (mqtt_trigger) {
char topic[TOPSZ];
sprintf_P(mqtt_data, PSTR("Trigger%u"), mqtt_trigger);
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local) {
snprintf_P(topic, sizeof(topic), PSTR("cmnd/%s/Event"), device_groups[power_button_index].group_name);
MqttPublish(topic);
}
else
#endif // USE_PWM_DIMMER_REMOTE
MqttPublishPrefixTopic_P(CMND, PSTR("Event"));
}
button_hold_time[button_index] = now + 500;
}
}
}
}
}
// If the button was just released, ...
else {
bool button_was_held = button_hold_sent[button_index];
// If the button was not held, send a button toggle. If the button was held but not processes by
// support_button or support_buttondoesn't process the toggle (is not handled by a rule), ...
if (!(button_hold_sent[button_index] ? button_hold_processed[button_index] : SendKey(KEY_BUTTON, button_index + 1, POWER_TOGGLE))) {
// If this is about the power button, ...
if (is_power_button) {
// If the power button was held, ...
if (button_was_held) {
// If the power button was held with no other buttons pressed, we changed the brightness
// so invert the bri direction for the next time and send a final update.
if (invert_power_button_bri_direction) {
invert_power_button_bri_direction = false;
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
active_remote_pwm_dimmer->power_button_increases_bri ^= 1;
else
#endif // USE_PWM_DIMMER_REMOTE
power_button_increases_bri ^= 1;
#ifdef USE_PWM_DIMMER_REMOTE
dgr_item = 255;
state_updated = true;
#endif // USE_PWM_DIMMER_REMOTE
}
// If the up or down button was tapped while the power button was held, ...
else if (tap_count) {
// If the button was tapped but not held, handle the operation based on which button was
// tapped.
if (!button_was_held) {
#ifdef USE_PWM_DIMMER_REMOTE
if (active_device_is_local) {
#endif // USE_PWM_DIMMER_REMOTE
// Toggle the powered-off LED option.
if (down_button_tapped) {
Settings.flag4.led_timeout ^= 1;
if (Light.power) PWMDimmerSetBrightnessLeds(Settings.flag4.led_timeout ? -1 : 0);
}
// Toggle the LED timeout.
else {
Settings.flag4.powered_off_led ^= 1;
PWMDimmerSetPoweredOffLed();
}
#ifdef USE_PWM_DIMMER_REMOTE
}
#endif // USE_PWM_DIMMER_REMOTE
}
// If the down button was tapped and held, we changed the fixed color. Send a final
// update.
else if (down_button_tapped) {
dgr_item = 255;
}
}
}
// If the power button was not held, toggle the power.
else {
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
power_on_bri = active_remote_pwm_dimmer->bri_power_on;
else
#endif // USE_PWM_DIMMER_REMOTE
power_on_bri = Settings.bri_power_on;
}
}
// If this is about the up or down buttons, ...
else {
if (restore_brightness_leds) {
restore_brightness_leds = false;
PWMDimmerSetBrightnessLeds(Settings.flag4.led_timeout ? -1 : 0);
}
// If the button was not held and the power button is also pressed, increment the count of
// how many times the button has been tapped.
if (!button_was_held && button_pressed[power_button_index]) {
down_button_tapped = is_down_button;
tap_count++;
}
// If the button wasn't tapped while the power button was pressed, ...
if (!tap_count) {
// If the power is on, ...
if (power_is_on) {
// If the button was not held, adjust the brightness. Set the direction based on which
// button is pressed. The new brightness will be calculated below.
if (button_hold_time[button_index] >= now) {
bri_offset = (is_down_button ? -10 : 10);
dgr_item = 255;
}
// If the button was held and the hold was not processed by a rule, we changed the
// brightness and sent updates with the more-to-come message type while the button was
// held. Send a final update.
else if (!button_hold_processed[button_index]) {
dgr_item = 255;
state_updated = true;
}
}
// If the power is off, turn it on using a temporary brightness of bri_preset_low if the
// down button is pressed or bri_preset_low if the up button is pressed.
else {
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
power_on_bri = active_remote_pwm_dimmer->bri = (is_down_button ? active_remote_pwm_dimmer->bri_preset_low : active_remote_pwm_dimmer->bri_preset_high);
else
#endif // USE_PWM_DIMMER_REMOTE
power_on_bri = (is_down_button ? Settings.bri_preset_low : Settings.bri_preset_high);
}
}
}
}
// Flag the button as released.
button_pressed[button_index] = false;
buttons_pressed--;
}
// If we need to adjust the brightness, do it.
if (bri_offset) {
int32_t bri;
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
bri = active_remote_pwm_dimmer->bri;
else
#endif // USE_PWM_DIMMER_REMOTE
bri = light_state.getBri();
int32_t new_bri;
bri_offset *= (Settings.light_correction ? 4 : bri / 16 + 1);
new_bri = bri + bri_offset;
if (bri_offset > 0) {
if (new_bri > 255) new_bri = 255;
}
else {
if (new_bri < 1) new_bri = 1;
}
if (new_bri != bri) {
#ifdef USE_DEVICE_GROUPS
SendDeviceGroupMessage(power_button_index, (dgr_item ? DGR_MSGTYP_UPDATE : DGR_MSGTYP_UPDATE_MORE_TO_COME), DGR_ITEM_LIGHT_BRI, new_bri);
#endif // USE_DEVICE_GROUPS
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
active_remote_pwm_dimmer->bri_power_on = active_remote_pwm_dimmer->bri = new_bri;
else {
#endif // USE_PWM_DIMMER_REMOTE
skip_light_fade = true;
light_state.setBri(new_bri);
LightAnimate();
skip_light_fade = false;
Settings.bri_power_on = new_bri;
#ifdef USE_PWM_DIMMER_REMOTE
}
#endif // USE_PWM_DIMMER_REMOTE
}
else {
PWMDimmerSetBrightnessLeds(0);
}
}
// If we're supposed to toggle the power on, do it.
else if (power_on_bri) {
power_t new_power;
#ifdef USE_DEVICE_GROUPS
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local) {
active_remote_pwm_dimmer->power ^= 1;
new_power = active_remote_pwm_dimmer->power;
}
else {
#endif // USE_PWM_DIMMER_REMOTE
new_power = power ^ 1;
#ifdef USE_PWM_DIMMER_REMOTE
}
#endif // USE_PWM_DIMMER_REMOTE
if (new_power)
SendDeviceGroupMessage(power_button_index, DGR_MSGTYP_UPDATE, DGR_ITEM_LIGHT_BRI, power_on_bri, DGR_ITEM_POWER, new_power);
else
SendDeviceGroupMessage(power_button_index, DGR_MSGTYP_UPDATE, DGR_ITEM_POWER, new_power);
#endif // USE_DEVICE_GROUPS
#ifdef USE_PWM_DIMMER_REMOTE
if (!active_device_is_local)
active_remote_pwm_dimmer->power_button_increases_bri = (power_on_bri < 128);
else {
#endif // USE_PWM_DIMMER_REMOTE
light_state.setBri(power_on_bri);
ExecuteCommandPower(1, POWER_TOGGLE, SRC_RETRY);
#ifdef USE_PWM_DIMMER_REMOTE
}
#endif // USE_PWM_DIMMER_REMOTE
}
// If we're not changing the brightness or toggling the power and we made changes, send a group
// update.
else if (dgr_item) {
#ifdef USE_DEVICE_GROUPS
if (dgr_item == 255) dgr_item = 0;
SendDeviceGroupMessage(power_button_index, (dgr_more_to_come ? DGR_MSGTYP_UPDATE_MORE_TO_COME : DGR_MSGTYP_UPDATE_DIRECT), dgr_item, dgr_value);
#endif // USE_DEVICE_GROUPS
#ifdef USE_PWM_DIMMER_REMOTE
if (active_device_is_local) {
#endif // USE_PWM_DIMMER_REMOTE
light_controller.saveSettings();
if (state_updated && Settings.flag3.hass_tele_on_power) { // SetOption59 - Send tele/%topic%/STATE in addition to stat/%topic%/RESULT
MqttPublishTeleState();
}
#ifdef USE_PWM_DIMMER_REMOTE
}
#endif // USE_PWM_DIMMER_REMOTE
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
void CmndBriPreset(void)
{
if (XdrvMailbox.data_len > 0) {
bool valid = true;
uint32_t value;
uint8_t parm[2];
parm[0] = Settings.bri_preset_low;
parm[1] = Settings.bri_preset_high;
char * ptr = XdrvMailbox.data;
for (uint32_t i = 0; i < 2; i++) {
while (*ptr == ' ') ptr++;
if (*ptr == '+') {
if (parm[i] < 255) parm[i]++;
}
else if (*ptr == '-') {
if (parm[i] > 1) parm[i]--;
}
else {
value = strtoul(ptr, &ptr, 0);
if (value < 1 || value > 255) {
valid = false;
break;
}
parm[i] = value;
if (*ptr != ',') break;
}
ptr++;
}
if (valid && !*ptr) {
if (parm[0] < parm[1]) {
Settings.bri_preset_low = parm[0];
Settings.bri_preset_high = parm[1];
} else
{
Settings.bri_preset_low = parm[1];
Settings.bri_preset_high = parm[0];
}
#ifdef USE_DEVICE_GROUPS
SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_BRI_PRESET_LOW, Settings.bri_preset_low, DGR_ITEM_BRI_PRESET_HIGH, Settings.bri_preset_high);
#endif // USE_DEVICE_GROUPS
}
}
Response_P(PSTR("{\"" D_CMND_BRI_PRESET "\":{\"Low\":%d,\"High\":%d}}"), Settings.bri_preset_low, Settings.bri_preset_high);
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv35(uint8_t function)
{
bool result = false;
if (PWM_DIMMER != my_module_type) return result;
switch (function) {
case FUNC_EVERY_SECOND:
// Turn off the brightness LED's if it's time.
if (led_timeout_seconds && !led_timeout_seconds--) {
PWMDimmerSetBrightnessLeds(-1);
}
// The powered-off LED is also the LedLink LED. If we lose the WiFi or MQTT server connection,
// the LED will be set to a blinking state and will be turned off when the connection is
// restored. If the state is blinking now, set a flag so we know that we need to restore it
// when it stops blinking.
if (global_state.data)
restore_powered_off_led_counter = 5;
else if (restore_powered_off_led_counter) {
PWMDimmerSetPoweredOffLed();
restore_powered_off_led_counter--;
}
break;
case FUNC_BUTTON_PRESSED:
PWMDimmerHandleButton();
result = true;
break;
#ifdef USE_DEVICE_GROUPS
case FUNC_DEVICE_GROUP_ITEM:
PWMDimmerHandleDevGroupItem();
break;
#endif // USE_DEVICE_GROUPS
case FUNC_COMMAND:
result = DecodeCommand(kPWMDimmerCommands, PWMDimmerCommand);
break;
case FUNC_SET_DEVICE_POWER:
// If we're turning the power on, turn the relay and the brightness LEDs on and turn the
// powered-off LED off.
if (XdrvMailbox.index) {
PWMDimmerSetPower();
// Set the power button hold dimmer direction based on the current brightness.
power_button_increases_bri = (light_state.getBri() < 128);
}
// If we're turning the power off, return true so SetDevicePower doesn't turn the relay off.
// It will be turned off in LightApplyFade when the fade is done.
else
result = true;
break;
case FUNC_PRE_INIT:
PWMModulePreInit();
break;
}
return result;
}
#endif // USE_PWM_DIMMER
Reference in New Issue View Git Blame Copy Permalink