mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/sonoff/xsns_08_htu21.ino

307 lines
7.7 KiB
C++
Raw Blame History

/*
xsns_08_htu21.ino - HTU21 temperature and humidity sensor support for Sonoff-Tasmota
Copyright (C) 2018 Heiko Krupp and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_HTU
/*********************************************************************************************\
* HTU21 - Temperature and Humidy
*
* Source: Heiko Krupp
*
* I2C Address: 0x40
\*********************************************************************************************/
#define HTU21_ADDR 0x40
#define SI7013_CHIPID 0x0D
#define SI7020_CHIPID 0x14
#define SI7021_CHIPID 0x15
#define HTU21_CHIPID 0x32
#define HTU21_READTEMP 0xE3
#define HTU21_READHUM 0xE5
#define HTU21_WRITEREG 0xE6
#define HTU21_READREG 0xE7
#define HTU21_RESET 0xFE
#define HTU21_HEATER_WRITE 0x51
#define HTU21_HEATER_READ 0x11
#define HTU21_SERIAL2_READ1 0xFC /* Read 3rd two Serial bytes */
#define HTU21_SERIAL2_READ2 0xC9 /* Read 4th two Serial bytes */
#define HTU21_HEATER_ON 0x04
#define HTU21_HEATER_OFF 0xFB
#define HTU21_RES_RH12_T14 0x00 // Default
#define HTU21_RES_RH8_T12 0x01
#define HTU21_RES_RH10_T13 0x80
#define HTU21_RES_RH11_T11 0x81
#define HTU21_CRC8_POLYNOM 0x13100
const char kHtuTypes[] PROGMEM = "HTU21|SI7013|SI7020|SI7021|T/RH?";
uint8_t htu_address;
uint8_t htu_type = 0;
uint8_t delay_temp;
uint8_t delay_humidity = 50;
char htu_types[7];
uint8_t HtuCheckCrc8(uint16_t data)
{
for (uint8_t bit = 0; bit < 16; bit++) {
if (data & 0x8000) {
data = (data << 1) ^ HTU21_CRC8_POLYNOM;
} else {
data <<= 1;
}
}
return data >>= 8;
}
uint8_t HtuReadDeviceId(void)
{
uint16_t deviceID = 0;
uint8_t checksum = 0;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_SERIAL2_READ1);
Wire.write(HTU21_SERIAL2_READ2);
Wire.endTransmission();
Wire.requestFrom(HTU21_ADDR, 3);
deviceID = Wire.read() << 8;
deviceID |= Wire.read();
checksum = Wire.read();
if (HtuCheckCrc8(deviceID) == checksum) {
deviceID = deviceID >> 8;
} else {
deviceID = 0;
}
return (uint8_t)deviceID;
}
void HtuSetResolution(uint8_t resolution)
{
uint8_t current = I2cRead8(HTU21_ADDR, HTU21_READREG);
current &= 0x7E; // Replace current resolution bits with 0
current |= resolution; // Add new resolution bits to register
I2cWrite8(HTU21_ADDR, HTU21_WRITEREG, current);
}
void HtuReset(void)
{
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_RESET);
Wire.endTransmission();
delay(15); // Reset takes 15ms
}
void HtuHeater(uint8_t heater)
{
uint8_t current = I2cRead8(HTU21_ADDR, HTU21_READREG);
switch(heater)
{
case HTU21_HEATER_ON : current |= heater;
break;
case HTU21_HEATER_OFF : current &= heater;
break;
default : current &= heater;
break;
}
I2cWrite8(HTU21_ADDR, HTU21_WRITEREG, current);
}
void HtuInit()
{
HtuReset();
HtuHeater(HTU21_HEATER_OFF);
HtuSetResolution(HTU21_RES_RH12_T14);
}
float HtuReadHumidity(void)
{
uint8_t checksum = 0;
uint16_t sensorval = 0;
float humidity = 0.0;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_READHUM);
if (Wire.endTransmission() != 0) {
return 0.0; // In case of error
}
delay(delay_humidity); // Sensor time at max resolution
Wire.requestFrom(HTU21_ADDR, 3);
if (3 <= Wire.available()) {
sensorval = Wire.read() << 8; // MSB
sensorval |= Wire.read(); // LSB
checksum = Wire.read();
}
if (HtuCheckCrc8(sensorval) != checksum) {
return 0.0; // Checksum mismatch
}
sensorval ^= 0x02; // clear status bits
humidity = 0.001907 * (float)sensorval - 6;
if (humidity > 100) {
return 100.0;
}
if (humidity < 0) {
return 0.01;
}
return humidity;
}
float HtuReadTemperature()
{
uint8_t checksum=0;
uint16_t sensorval=0;
float t;
Wire.beginTransmission(HTU21_ADDR);
Wire.write(HTU21_READTEMP);
if (Wire.endTransmission() != 0) {
return 0.0; // In case of error
}
delay(delay_temp); // Sensor time at max resolution
Wire.requestFrom(HTU21_ADDR, 3);
if (3 == Wire.available()) {
sensorval = Wire.read() << 8; // MSB
sensorval |= Wire.read(); // LSB
checksum = Wire.read();
}
if (HtuCheckCrc8(sensorval) != checksum) {
return 0.0; // Checksum mismatch
}
t = ConvertTemp(0.002681 * (float)sensorval - 46.85);
return t;
}
float HtuCompensatedHumidity(float humidity, float temperature)
{
if(humidity == 0.00 && temperature == 0.00) {
return 0.0;
}
if(temperature > 0.00 && temperature < 80.00) {
return (-0.15)*(25-temperature)+humidity;
}
return humidity;
}
/********************************************************************************************/
void HtuDetect()
{
if (htu_type) {
return;
}
htu_address = HTU21_ADDR;
htu_type = HtuReadDeviceId();
if (htu_type) {
uint8_t index = 0;
HtuInit();
switch (htu_type) {
case HTU21_CHIPID:
delay_temp = 50;
delay_humidity = 16;
break;
case SI7021_CHIPID:
index++; // 3
case SI7020_CHIPID:
index++; // 2
case SI7013_CHIPID:
index++; // 1
delay_temp = 12;
delay_humidity = 23;
break;
default:
index = 4;
delay_temp = 50;
delay_humidity = 23;
}
GetTextIndexed(htu_types, sizeof(htu_types), index, kHtuTypes);
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, htu_types, htu_address);
AddLog(LOG_LEVEL_DEBUG);
}
}
void HtuShow(boolean json)
{
if (htu_type) {
char temperature[10];
char humidity[10];
float t = HtuReadTemperature();
float h = HtuReadHumidity();
h = HtuCompensatedHumidity(h, t);
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
if (json) {
snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, htu_types, temperature, humidity);
#ifdef USE_DOMOTICZ
if (0 == tele_period) DomoticzTempHumSensor(temperature, humidity);
#endif // USE_DOMOTICZ
#ifdef USE_WEBSERVER
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, htu_types, temperature, TempUnit());
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, htu_types, humidity);
#endif // USE_WEBSERVER
}
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XSNS_08
boolean Xsns08(byte function)
{
boolean result = false;
if (i2c_flg) {
switch (function) {
case FUNC_PREP_BEFORE_TELEPERIOD:
HtuDetect();
break;
case FUNC_JSON_APPEND:
HtuShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_APPEND:
HtuShow(0);
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_HTU
#endif // USE_I2C
Reference in New Issue View Git Blame Copy Permalink