mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xdrv_23_zigbee_8_parsers.ino

2005 lines
73 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
xdrv_23_zigbee.ino - zigbee support for Tasmota
Copyright (C) 2020 Theo Arends and Stephan Hadinger
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ZIGBEE
#ifdef USE_ZIGBEE_EZSP
//
// Trying to get a uniform LQI measure, we are aligning with the definition of ZNP
// I.e. a linear projection from -87dBm to +10dB over 0..255
// for ZNP, lqi is linear from -87 to +10 dBm (https://sunmaysky.blogspot.com/2017/02/conversion-between-rssi-and-lqi-in-z.html)
uint8_t ZNP_RSSI2Lqi(int8_t rssi) {
if (rssi < -87) { rssi = -87; }
if (rssi > 10) { rssi = 10; }
return changeUIntScale(rssi + 87, 0, 87+10, 0, 254);
}
/*********************************************************************************************\
* Parsers for incoming EZSP messages
\*********************************************************************************************/
// EZSP: received ASH "RSTACK" frame, indicating that the MCU finished boot
int32_t EZ_RSTACK(uint8_t reset_code) {
const char *reason_str;
switch (reset_code) {
case 0x01: reason_str = PSTR("External"); break;
case 0x02: reason_str = PSTR("Power-on"); break;
case 0x03: reason_str = PSTR("Watchdog"); break;
case 0x06: reason_str = PSTR("Assert"); break;
case 0x09: reason_str = PSTR("Bootloader"); break;
case 0x0B: reason_str = PSTR("Software"); break;
case 0x00:
default: reason_str = PSTR("Unknown"); break;
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Message\":\"EFR32 booted\",\"RestartReason\":\"%s\""
",\"Code\":%d}}"),
ZIGBEE_STATUS_BOOT, reason_str, reset_code);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
}
// EZSP: received ASH "ERROR" frame, indicating that the MCU finished boot
int32_t EZ_ERROR(uint8_t error_code) {
const char *reason_str;
switch (error_code) {
case 0x51: reason_str = PSTR("ACK timeout"); break;
default: reason_str = PSTR("Unknown"); break;
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Message\":\"Failed state\",\"Error\":\"%s\""
",\"Code\":%d}}"),
ZIGBEE_STATUS_ABORT, reason_str, error_code);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
}
int32_t EZ_ReadAPSUnicastMessage(int32_t res, class SBuffer &buf) {
// Called when receiving a response from getConfigurationValue
// Value is in bytes 2+3
uint16_t value = buf.get16(2);
return res;
}
/*********************************************************************************************\
* Parsers for incoming EZSP messages
\*********************************************************************************************/
//
// Handle a "getEui64" incoming message
//
int32_t EZ_GetEUI64(int32_t res, class SBuffer &buf) {
localIEEEAddr = buf.get64(2);
return res;
}
//
// Handle a "getEui64" incoming message
//
int32_t EZ_GetNodeId(int32_t res, class SBuffer &buf) {
localShortAddr = buf.get8(2);
return res;
}
//
// Handle a "getNetworkParameters" incoming message
//
int32_t EZ_NetworkParameters(int32_t res, class SBuffer &buf) {
uint8_t node_type = buf.get8(3);
// ext panid: 4->11
// panid: 12->13
// radioTxPower: 14
// radioChannel: 15
// Local short and long addresses are supposed to be already retrieved
// localIEEEAddr = long_adr;
// localShortAddr = short_adr;
char hex[20];
Uint64toHex(localIEEEAddr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"DeviceType\":%d}}"),
ZIGBEE_STATUS_EZ_INFO, hex, localShortAddr, node_type);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
return res;
}
//
// Analyze response to "getKey" and check NWK key
//
int32_t EZ_CheckKeyNWK(int32_t res, class SBuffer &buf) {
uint8_t status = buf.get8(2);
uint16_t bitmask = buf.get16(3);
uint8_t key_type = buf.get8(5);
uint64_t key_low = buf.get64(6);
uint64_t key_high = buf.get64(14);
if ( (key_type == EMBER_CURRENT_NETWORK_KEY) &&
(key_low == ezsp_key_low) &&
(key_high == ezsp_key_high) ) {
return 0; // proceed to next step
} else {
return -2; // error state
}
}
//
// Handle a "incomingRouteErrorHandler" incoming message
//
int32_t EZ_RouteError(int32_t res, const class SBuffer &buf) {
uint8_t status = buf.get8(2);
uint16_t shortaddr = buf.get16(3);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_ROUTE_ERROR "\":{"
"\"ShortAddr\":\"0x%04X\",\"" D_JSON_ZIGBEE_STATUS "\":%d,\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\"}}"),
shortaddr, status, getEmberStatus(status).c_str());
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
return -1;
}
//
// Handle a "permitJoining" incoming message
//
int32_t EZ_PermitJoinRsp(int32_t res, const class SBuffer &buf) {
uint8_t status = buf.get8(2);
if (status) { // only report if there is an error
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{\"Status\":23,\"Message\":\"Pairing mode error 0x%02X\"}}"), status);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
}
return -1;
}
//
// Special case: EZSP does not send an event for PermitJoin end, so we generate a synthetic one
//
void Z_PermitJoinDisable(void) {
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{\"Status\":20,\"Message\":\"Pairing mode disabled\"}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
}
//
// Received MessageSentHandler
//
// We normally ignore the message, but it's a way to sniff group ids for IKEA remote
// In case of a multicast message sent to 0xFFFD with non-null group id, we log the group id
int32_t EZ_MessageSent(int32_t res, const class SBuffer &buf) {
uint8_t message_type = buf.get8(2);
uint16_t dst_addr = buf.get16(3);
uint16_t group_addr = buf.get16(13);
if ((EMBER_OUTGOING_MULTICAST == message_type) && (0xFFFD == dst_addr)) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE "Sniffing group 0x%04X"), group_addr);
}
return -1; // ignore
}
#endif // USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Parsers for incoming EZSP messages
\*********************************************************************************************/
//
// Handle a "getEui64" incoming message
//
int32_t Z_EZSPGetEUI64(int32_t res, class SBuffer &buf) {
localIEEEAddr = buf.get64(2);
return res;
}
//
// Handle a "getEui64" incoming message
//
int32_t Z_EZSPGetNodeId(int32_t res, class SBuffer &buf) {
localShortAddr = buf.get8(2);
return res;
}
//
// Handle a "getNetworkParameters" incoming message
//
int32_t Z_EZSPNetworkParameters(int32_t res, class SBuffer &buf) {
uint8_t node_type = buf.get8(3);
// ext panid: 4->11
// panid: 12->13
// radioTxPower: 14
// radioChannel: 15
// Local short and long addresses are supposed to be already retrieved
// localIEEEAddr = long_adr;
// localShortAddr = short_adr;
char hex[20];
Uint64toHex(localIEEEAddr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"DeviceType\":%d}}"),
ZIGBEE_STATUS_EZ_INFO, hex, localShortAddr, node_type);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
return res;
}
/*********************************************************************************************\
* Parsers for incoming ZNP messages
\*********************************************************************************************/
//
// Handle a "Receive Device Info" incoming message
//
int32_t ZNP_ReceiveDeviceInfo(int32_t res, class SBuffer &buf) {
// Ex= 6700.00.6263151D004B1200.0000.07.09.02.83869991
// IEEE Adr (8 bytes) = 0x00124B001D156362
// Short Addr (2 bytes) = 0x0000
// Device Type (1 byte) = 0x07 (coord?)
// Device State (1 byte) = 0x09 (coordinator started)
// NumAssocDevices (1 byte) = 0x02
// List of devices: 0x8683, 0x9199
Z_IEEEAddress long_adr = buf.get64(3);
Z_ShortAddress short_adr = buf.get16(11);
uint8_t device_type = buf.get8(13);
uint8_t device_state = buf.get8(14);
uint8_t device_associated = buf.get8(15);
// keep track of the local IEEE address
localIEEEAddr = long_adr;
localShortAddr = short_adr;
char hex[20];
Uint64toHex(long_adr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"DeviceType\":%d,\"DeviceState\":%d"
",\"NumAssocDevices\":%d"),
ZIGBEE_STATUS_CC_INFO, hex, short_adr, device_type, device_state,
device_associated);
if (device_associated > 0) { // If there are devices registered in CC2530, print the list
uint idx = 16;
ResponseAppend_P(PSTR(",\"AssocDevicesList\":["));
for (uint32_t i = 0; i < device_associated; i++) {
if (i > 0) { ResponseAppend_P(PSTR(",")); }
ResponseAppend_P(PSTR("\"0x%04X\""), buf.get16(idx));
idx += 2;
}
ResponseAppend_P(PSTR("]"));
}
ResponseJsonEndEnd(); // append '}}'
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
return res;
}
int32_t ZNP_CheckNVWrite(int32_t res, class SBuffer &buf) {
// Check the status after NV Init "ZNP Has Configured"
// Good response should be 610700 or 610709 (Success or Created)
// We only filter the response on 6107 and check the code in this function
uint8_t status = buf.get8(2);
if ((0x00 == status) || (0x09 == status)) {
return 0; // Ok, continue
} else {
return -2; // Error
}
}
int32_t ZNP_Reboot(int32_t res, class SBuffer &buf) {
// print information about the reboot of device
// 4180.02.02.00.02.06.03
//
uint8_t reason = buf.get8(2);
uint8_t transport_rev = buf.get8(3);
uint8_t product_id = buf.get8(4);
uint8_t major_rel = buf.get8(5);
uint8_t minor_rel = buf.get8(6);
uint8_t hw_rev = buf.get8(7);
const char *reason_str;
switch (reason) {
case 0: reason_str = PSTR("Power-up"); break;
case 1: reason_str = PSTR("External"); break;
case 2: reason_str = PSTR("Watchdog"); break;
default: reason_str = PSTR("Unknown"); break;
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Message\":\"CC2530 booted\",\"RestartReason\":\"%s\""
",\"MajorRel\":%d,\"MinorRel\":%d}}"),
ZIGBEE_STATUS_BOOT, reason_str,
major_rel, minor_rel);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
if ((0x02 == major_rel) && (0x06 == minor_rel)) {
return 0; // version 2.6.x is ok
} else {
return ZIGBEE_LABEL_UNSUPPORTED_VERSION; // abort
}
}
#ifdef USE_ZIGBEE_ZNP
int32_t ZNP_ReceiveCheckVersion(int32_t res, class SBuffer &buf) {
// check that the version is supported
// typical version for ZNP 1.2
// 61020200-02.06.03.D9143401.0200000000
// TranportRev = 02
// Product = 00
// MajorRel = 2
// MinorRel = 6
// MaintRel = 3
// Revision = 20190425 d (0x013414D9)
uint8_t major_rel = buf.get8(4);
uint8_t minor_rel = buf.get8(5);
uint8_t maint_rel = buf.get8(6);
uint32_t revision = buf.get32(7);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"MajorRel\":%d,\"MinorRel\":%d"
",\"MaintRel\":%d,\"Revision\":%d}}"),
ZIGBEE_STATUS_CC_VERSION, major_rel, minor_rel,
maint_rel, revision);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
if ((0x02 == major_rel) && (0x06 == minor_rel)) {
return 0; // version 2.6.x is ok
} else {
return ZIGBEE_LABEL_UNSUPPORTED_VERSION; // abort
}
}
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
int32_t EZ_ReceiveCheckVersion(int32_t res, class SBuffer &buf) {
uint8_t protocol_version = buf.get8(2);
uint8_t stack_type = buf.get8(3);
uint16_t stack_version = buf.get16(4);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Version\":\"%d.%d.%d.%d\",\"Protocol\":%d"
",\"Stack\":%d}}"),
ZIGBEE_STATUS_EZ_VERSION,
(stack_version & 0xF000) >> 12,
(stack_version & 0x0F00) >> 8,
(stack_version & 0x00F0) >> 4,
stack_version & 0x000F,
protocol_version,
stack_type
);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
if (0x08 == protocol_version) {
if ((stack_version & 0xFF00) == 0x6700) {
// If v6.7 there is a bug so we need to change the response
ZBW(ZBR_SET_OK2, 0x00, 0x00 /*high*/, 0x00 /*ok*/)
}
return 0; // protocol v8 is ok
} else {
return ZIGBEE_LABEL_UNSUPPORTED_VERSION; // abort
}
}
bool EZ_reset_config = false;
// Set or clear reset_config
int32_t EZ_Set_ResetConfig(uint8_t value) {
EZ_reset_config = value ? true : false;
return 0;
}
// checks if we need to reset the configuration of the device
// if reset_config == 0, continue
// if reset_config == 1, goto ZIGBEE_LABEL_CONFIGURE_EZSP
int32_t EZ_GotoIfResetConfig(uint8_t value) {
if (EZ_reset_config) { return ZIGBEE_LABEL_CONFIGURE_EZSP; }
else { return 0; }
}
#endif // USE_ZIGBEE_EZSP
// checks the device type (coordinator, router, end-device)
// If coordinator continue
// If router goto ZIGBEE_LABEL_START_ROUTER
// If device goto ZIGBEE_LABEL_START_DEVICE
int32_t Z_SwitchDeviceType(int32_t res, class SBuffer &buf) {
switch (Settings.zb_pan_id) {
case 0xFFFF: return ZIGBEE_LABEL_INIT_ROUTER;
case 0xFFFE: return ZIGBEE_LABEL_INIT_DEVICE;
default: return 0; // continue
}
}
//
// Helper function, checks if the incoming buffer matches the 2-bytes prefix, i.e. message type in PMEM
//
bool Z_ReceiveMatchPrefix(const class SBuffer &buf, const uint8_t *match) {
if ( (pgm_read_byte(&match[0]) == buf.get8(0)) &&
(pgm_read_byte(&match[1]) == buf.get8(1)) ) {
return true;
} else {
return false;
}
}
//
// Handle Permit Join response
//
int32_t ZNP_ReceivePermitJoinStatus(int32_t res, const class SBuffer &buf) {
// we received a PermitJoin status change
uint8_t duration = buf.get8(2);
uint8_t status_code;
const char* message;
if (0xFF == duration) {
status_code = ZIGBEE_STATUS_PERMITJOIN_OPEN_XX;
message = PSTR("Enable Pairing mode until next boot");
} else if (duration > 0) {
status_code = ZIGBEE_STATUS_PERMITJOIN_OPEN_60;
message = PSTR("Enable Pairing mode for %d seconds");
} else {
status_code = ZIGBEE_STATUS_PERMITJOIN_CLOSE;
message = PSTR("Disable Pairing mode");
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Message\":\""),
status_code);
ResponseAppend_P(message, duration);
ResponseAppend_P(PSTR("\"}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
return -1;
}
//
// ZNP only
//
int32_t ZNP_ReceiveNodeDesc(int32_t res, const class SBuffer &buf) {
// Received ZDO_NODE_DESC_RSP
Z_ShortAddress srcAddr = buf.get16(2);
uint8_t status = buf.get8(4);
Z_ShortAddress nwkAddr = buf.get16(5);
uint8_t logicalType = buf.get8(7);
uint8_t apsFlags = buf.get8(8);
uint8_t MACCapabilityFlags = buf.get8(9);
uint16_t manufacturerCapabilities = buf.get16(10);
uint8_t maxBufferSize = buf.get8(12);
uint16_t maxInTransferSize = buf.get16(13);
uint16_t serverMask = buf.get16(15);
uint16_t maxOutTransferSize = buf.get16(17);
uint8_t descriptorCapabilities = buf.get8(19);
if (0 == status) {
uint8_t deviceType = logicalType & 0x7; // 0=coordinator, 1=router, 2=end device
const char * deviceTypeStr;
switch (deviceType) {
case 0: deviceTypeStr = PSTR("Coordinator"); break;
case 1: deviceTypeStr = PSTR("Router"); break;
case 2: deviceTypeStr = PSTR("Device"); break;
default: deviceTypeStr = PSTR("Unknown"); break;
}
bool complexDescriptorAvailable = (logicalType & 0x08) ? 1 : 0;
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"NodeType\":\"%s\",\"ComplexDesc\":%s}}"),
ZIGBEE_STATUS_NODE_DESC, deviceTypeStr,
complexDescriptorAvailable ? PSTR("true") : PSTR("false")
);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
}
return -1;
}
//
// Porcess Receive Active Endpoint
//
int32_t Z_ReceiveActiveEp(int32_t res, const class SBuffer &buf) {
// Received ZDO_ACTIVE_EP_RSP
#ifdef USE_ZIGBEE_ZNP
// Z_ShortAddress srcAddr = buf.get16(2);
uint8_t status = buf.get8(4);
Z_ShortAddress nwkAddr = buf.get16(5);
uint8_t activeEpCount = buf.get8(7);
uint8_t* activeEpList = (uint8_t*) buf.charptr(8);
#endif
#ifdef USE_ZIGBEE_EZSP
uint8_t status = buf.get8(0);
Z_ShortAddress nwkAddr = buf.get16(1);
uint8_t activeEpCount = buf.get8(3);
uint8_t* activeEpList = (uint8_t*) buf.charptr(4);
#endif
for (uint32_t i = 0; i < activeEpCount; i++) {
uint8_t ep = activeEpList[i];
zigbee_devices.getShortAddr(nwkAddr).addEndpoint(ep);
if ((i < 4) && (ep < 0x10)) {
zigbee_devices.queueTimer(nwkAddr, 0 /* groupaddr */, 1500, ep /* fake cluster as ep */, ep, Z_CAT_EP_DESC, 0 /* value */, &Z_SendSimpleDescReq);
}
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"ActiveEndpoints\":["),
ZIGBEE_STATUS_ACTIVE_EP);
for (uint32_t i = 0; i < activeEpCount; i++) {
if (i > 0) { ResponseAppend_P(PSTR(",")); }
ResponseAppend_P(PSTR("\"0x%02X\""), activeEpList[i]);
}
ResponseAppend_P(PSTR("]}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
Z_SendDeviceInfoRequest(nwkAddr); // probe for ModelId and ManufId
return -1;
}
// list of clusters that need bindings
const uint8_t Z_bindings[] PROGMEM = {
Cx0001, Cx0006, Cx0008, Cx0201, Cx0300,
Cx0400, Cx0402, Cx0403, Cx0405, Cx0406,
Cx0500,
};
int32_t Z_ClusterToCxBinding(uint16_t cluster) {
uint8_t cx = ClusterToCx(cluster);
for (uint32_t i=0; i<ARRAY_SIZE(Z_bindings); i++) {
if (pgm_read_byte(&Z_bindings[i]) == cx) {
return i;
}
}
return -1;
}
void Z_AutoBindDefer(uint16_t shortaddr, uint8_t endpoint, const SBuffer &buf,
size_t in_index, size_t in_len, size_t out_index, size_t out_len) {
// We use bitmaps to mark clusters that need binding and config attributes
// All clusters in 'in' and 'out' are bounded
// Only cluster in 'in' receive configure attribute requests
uint32_t cluster_map = 0; // max 32 clusters to bind
uint32_t cluster_in_map = 0; // map of clusters only in 'in' group, to be bounded
// First enumerate all clusters to bind, from in or out clusters
// scan in clusters
for (uint32_t i=0; i<in_len; i++) {
uint16_t cluster = buf.get16(in_index + i*2);
uint32_t found_cx = Z_ClusterToCxBinding(cluster); // convert to Cx of -1 if not found
if (found_cx >= 0) {
bitSet(cluster_map, found_cx);
bitSet(cluster_in_map, found_cx);
}
}
// scan out clusters
for (uint32_t i=0; i<out_len; i++) {
uint16_t cluster = buf.get16(out_index + i*2);
uint32_t found_cx = Z_ClusterToCxBinding(cluster); // convert to Cx of -1 if not found
if (found_cx >= 0) {
bitSet(cluster_map, found_cx);
}
}
// if IAS device, request the device type
if (bitRead(cluster_map, Z_ClusterToCxBinding(0x0500))) {
// send a read command to cluster 0x0500, attribute 0x0001 (ZoneType) - to read the type of sensor
zigbee_devices.queueTimer(shortaddr, 0 /* groupaddr */, 2000, 0x0500, endpoint, Z_CAT_READ_ATTRIBUTE, 0x0001, &Z_SendSingleAttributeRead);
}
// enqueue bind requests
for (uint32_t i=0; i<ARRAY_SIZE(Z_bindings); i++) {
if (bitRead(cluster_map, i)) {
uint16_t cluster = CxToCluster(pgm_read_byte(&Z_bindings[i]));
zigbee_devices.queueTimer(shortaddr, 0 /* groupaddr */, 2000, cluster, endpoint, Z_CAT_BIND, 0 /* value */, &Z_AutoBind);
}
}
// enqueue config attribute requests
for (uint32_t i=0; i<ARRAY_SIZE(Z_bindings); i++) {
if (bitRead(cluster_in_map, i)) {
uint16_t cluster = CxToCluster(pgm_read_byte(&Z_bindings[i]));
zigbee_devices.queueTimer(shortaddr, 0 /* groupaddr */, 2000, cluster, endpoint, Z_CAT_CONFIG_ATTR, 0 /* value */, &Z_AutoConfigReportingForCluster);
}
}
}
int32_t Z_ReceiveSimpleDesc(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
// Received ZDO_SIMPLE_DESC_RSP
// Z_ShortAddress srcAddr = buf.get16(2);
uint8_t status = buf.get8(4);
Z_ShortAddress nwkAddr = buf.get16(5);
uint8_t lenDescriptor = buf.get8(7);
uint8_t endpoint = buf.get8(8);
uint16_t profileId = buf.get16(9); // The profile Id for this endpoint.
uint16_t deviceId = buf.get16(11); // The Device Description Id for this endpoint.
uint8_t deviceVersion = buf.get8(13); // 0 – Version 1.00
uint8_t numInCluster = buf.get8(14);
uint8_t numOutCluster = buf.get8(15 + numInCluster*2);
const size_t numInIndex = 15;
const size_t numOutIndex = 16 + numInCluster*2;
#endif
#ifdef USE_ZIGBEE_EZSP
uint8_t status = buf.get8(0);
Z_ShortAddress nwkAddr = buf.get16(1);
uint8_t lenDescriptor = buf.get8(3);
uint8_t endpoint = buf.get8(4);
uint16_t profileId = buf.get16(5); // The profile Id for this endpoint.
uint16_t deviceId = buf.get16(7); // The Device Description Id for this endpoint.
uint8_t deviceVersion = buf.get8(9); // 0 – Version 1.00
uint8_t numInCluster = buf.get8(10);
uint8_t numOutCluster = buf.get8(11 + numInCluster*2);
const size_t numInIndex = 11;
const size_t numOutIndex = 12 + numInCluster*2;
#endif
if (0 == status) {
if (!Settings.flag4.zb_disable_autobind) {
Z_AutoBindDefer(nwkAddr, endpoint, buf, numInIndex, numInCluster, numOutIndex, numOutCluster);
}
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"Endpoint\":\"0x%02X\""
",\"ProfileId\":\"0x%04X\",\"DeviceId\":\"0x%04X\",\"DeviceVersion\":%d"
"\"InClusters\":["),
ZIGBEE_STATUS_SIMPLE_DESC, endpoint,
profileId, deviceId, deviceVersion);
for (uint32_t i = 0; i < numInCluster; i++) {
if (i > 0) { ResponseAppend_P(PSTR(",")); }
ResponseAppend_P(PSTR("\"0x%04X\""), buf.get16(numInIndex + i*2));
}
ResponseAppend_P(PSTR("],\"OutClusters\":["));
for (uint32_t i = 0; i < numOutCluster; i++) {
if (i > 0) { ResponseAppend_P(PSTR(",")); }
ResponseAppend_P(PSTR("\"0x%04X\""), buf.get16(numOutIndex + i*2));
}
ResponseAppend_P(PSTR("]}}"));
MqttPublishPrefixTopic_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
XdrvRulesProcess();
}
return -1;
}
//
// Handle IEEEAddr incoming message
//
// Same works for both ZNP and EZSP
int32_t Z_ReceiveIEEEAddr(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
uint8_t status = buf.get8(2);
Z_IEEEAddress ieeeAddr = buf.get64(3);
Z_ShortAddress nwkAddr = buf.get16(11);
// uint8_t startIndex = buf.get8(13); // not used
// uint8_t numAssocDev = buf.get8(14);
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
uint8_t status = buf.get8(0);
Z_IEEEAddress ieeeAddr = buf.get64(1);
Z_ShortAddress nwkAddr = buf.get16(9);
// uint8_t numAssocDev = buf.get8(11);
// uint8_t startIndex = buf.get8(12); // not used
#endif // USE_ZIGBEE_EZSP
if (0 == status) { // SUCCESS
zigbee_devices.updateDevice(nwkAddr, ieeeAddr);
char hex[20];
Uint64toHex(ieeeAddr, hex, 64);
// Ping response
const char * friendlyName = zigbee_devices.getFriendlyName(nwkAddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_PING "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""
",\"" D_JSON_ZIGBEE_IEEE "\":\"0x%s\""), nwkAddr, hex);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
ResponseAppend_P(PSTR("\"}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
}
return -1;
}
//
// Report any AF_DATA_CONFIRM message
// Ex: {"ZbConfirm":{"Endpoint":1,"Status":0,"StatusMessage":"SUCCESS"}}
//
int32_t ZNP_DataConfirm(int32_t res, const class SBuffer &buf) {
uint8_t status = buf.get8(2);
uint8_t endpoint = buf.get8(3);
//uint8_t transId = buf.get8(4); // unused
if (status) { // only report errors
Response_P(PSTR("{\"" D_JSON_ZIGBEE_CONFIRM "\":{\"" D_CMND_ZIGBEE_ENDPOINT "\":%d"
",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
"}}"), endpoint, status, getZigbeeStatusMessage(status).c_str());
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
}
return -1;
}
//
// Handle State Change Indication incoming message
//
// Reference:
// 0x00: Initialized - not started automatically
// 0x01: Initialized - not connected to anything
// 0x02: Discovering PAN's to join
// 0x03: Joining a PAN
// 0x04: Rejoining a PAN, only for end devices
// 0x05: Joined but not yet authenticated by trust center
// 0x06: Started as device after authentication
// 0x07: Device joined, authenticated and is a router
// 0x08: Starting as ZigBee Coordinator
// 0x09: Started as ZigBee Coordinator
// 0x0A: Device has lost information about its parent
int32_t ZNP_ReceiveStateChange(int32_t res, const class SBuffer &buf) {
uint8_t state = buf.get8(2);
const char * msg = nullptr;
switch (state) {
case ZDO_DEV_NWK_DISC: // 0x02
msg = PSTR("Scanning Zigbee network");
break;
case ZDO_DEV_NWK_JOINING: // 0x03
case ZDO_DEV_NWK_REJOIN: // 0x04
msg = PSTR("Joining a PAN");
break;
case ZDO_DEV_END_DEVICE_UNAUTH: // 0x05
msg = PSTR("Joined, not yet authenticated");
break;
case ZDO_DEV_END_DEVICE: // 0x06
msg = PSTR("Started as device");
break;
case ZDO_DEV_ROUTER: // 0x07
msg = PSTR("Started as router");
break;
case ZDO_DEV_ZB_COORD: // 0x09
msg = PSTR("Started as coordinator");
break;
case ZDO_DEV_NWK_ORPHAN: // 0x0A
msg = PSTR("Device has lost its parent");
break;
};
if (msg) {
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"NewState\":%d,\"Message\":\"%s\"}}"),
ZIGBEE_STATUS_SCANNING, state, msg
);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
}
if ((ZDO_DEV_END_DEVICE == state) || (ZDO_DEV_ROUTER == state) || (ZDO_DEV_ZB_COORD == state)) {
return 0; // device sucessfully started
} else {
return -1; // ignore
}
}
//
// Handle Receive End Device Announce incoming message
// This message is also received when a previously paired device is powered up
// Send back Active Ep Req message
//
int32_t Z_ReceiveEndDeviceAnnonce(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
// Z_ShortAddress srcAddr = buf.get16(2);
Z_ShortAddress nwkAddr = buf.get16(4);
Z_IEEEAddress ieeeAddr = buf.get64(6);
uint8_t capabilities = buf.get8(14);
#endif
#ifdef USE_ZIGBEE_EZSP
// uint8_t seq = buf.get8(0);
Z_ShortAddress nwkAddr = buf.get16(0);
Z_IEEEAddress ieeeAddr = buf.get64(2);
uint8_t capabilities = buf.get8(10);
#endif
zigbee_devices.updateDevice(nwkAddr, ieeeAddr);
char hex[20];
Uint64toHex(ieeeAddr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"PowerSource\":%s,\"ReceiveWhenIdle\":%s,\"Security\":%s}}"),
ZIGBEE_STATUS_DEVICE_ANNOUNCE, hex, nwkAddr,
(capabilities & 0x04) ? PSTR("true") : PSTR("false"),
(capabilities & 0x08) ? PSTR("true") : PSTR("false"),
(capabilities & 0x40) ? PSTR("true") : PSTR("false")
);
// query the state of the bulb (for Alexa)
uint32_t wait_ms = 2000; // wait for 2s
Z_Query_Bulb(nwkAddr, wait_ms);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
Z_SendActiveEpReq(nwkAddr);
return -1;
}
//
// Handle Receive TC Dev Ind incoming message
// 45CA
//
int32_t ZNP_ReceiveTCDevInd(int32_t res, const class SBuffer &buf) {
Z_ShortAddress srcAddr = buf.get16(2);
Z_IEEEAddress ieeeAddr = buf.get64(4);
Z_ShortAddress parentNw = buf.get16(12);
zigbee_devices.updateDevice(srcAddr, ieeeAddr);
char hex[20];
Uint64toHex(ieeeAddr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"ParentNetwork\":\"0x%04X\"}}"),
ZIGBEE_STATUS_DEVICE_INDICATION, hex, srcAddr, parentNw
);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
return -1;
}
//
// Handle Bind Rsp incoming message
//
int32_t Z_BindRsp(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
Z_ShortAddress nwkAddr = buf.get16(2);
uint8_t status = buf.get8(4);
String msg = getZigbeeStatusMessage(status);
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
uint8_t status = buf.get8(0);
Z_ShortAddress nwkAddr = buf.get16(buf.len()-2); // last 2 bytes
String msg = getZDPStatusMessage(status);
#endif // USE_ZIGBEE_EZSP
const char * friendlyName = zigbee_devices.getFriendlyName(nwkAddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_BIND "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""), nwkAddr);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
"}}"), status, msg.c_str());
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
return -1;
}
//
// Handle Unbind Rsp incoming message
//
int32_t Z_UnbindRsp(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
Z_ShortAddress nwkAddr = buf.get16(2);
uint8_t status = buf.get8(4);
String msg = getZigbeeStatusMessage(status);
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
uint8_t status = buf.get8(0);
Z_ShortAddress nwkAddr = buf.get16(buf.len()-2); // last 2 bytes
String msg = getZDPStatusMessage(status);
#endif // USE_ZIGBEE_EZSP
const char * friendlyName = zigbee_devices.getFriendlyName(nwkAddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_UNBIND "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""), nwkAddr);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
"}}"), status, msg.c_str());
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
return -1;
}
//
// Handle MgMt Bind Rsp incoming message
//
int32_t Z_MgmtBindRsp(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
uint16_t shortaddr = buf.get16(2);
uint8_t status = buf.get8(4);
uint8_t bind_total = buf.get8(5);
uint8_t bind_start = buf.get8(6);
uint8_t bind_len = buf.get8(7);
const size_t prefix_len = 8;
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
uint16_t shortaddr = buf.get16(buf.len()-2);
uint8_t status = buf.get8(0);
uint8_t bind_total = buf.get8(1);
uint8_t bind_start = buf.get8(2);
uint8_t bind_len = buf.get8(3);
const size_t prefix_len = 4;
#endif // USE_ZIGBEE_EZSP
const char * friendlyName = zigbee_devices.getFriendlyName(shortaddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_BIND_STATE "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""), shortaddr);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
",\"BindingsTotal\":%d"
",\"BindingsStart\":%d"
",\"Bindings\":["
), status, getZigbeeStatusMessage(status).c_str(), bind_total, bind_start + 1);
uint32_t idx = prefix_len;
for (uint32_t i = 0; i < bind_len; i++) {
if (idx + 14 > buf.len()) { break; } // overflow, frame size is between 14 and 21
//uint64_t srcaddr = buf.get16(idx); // unused
uint8_t srcep = buf.get8(idx + 8);
uint16_t cluster = buf.get16(idx + 9);
uint8_t addrmode = buf.get8(idx + 11);
uint16_t group = 0x0000;
uint64_t dstaddr = 0;
uint8_t dstep = 0x00;
if (Z_Addr_Group == addrmode) { // Group address mode
group = buf.get16(idx + 12);
idx += 14;
} else if (Z_Addr_IEEEAddress == addrmode) { // IEEE address mode
dstaddr = buf.get64(idx + 12);
dstep = buf.get8(idx + 20);
idx += 21;
} else {
//AddLog_P2(LOG_LEVEL_INFO, PSTR("ZNP_MgmtBindRsp unknwon address mode %d"), addrmode);
break; // abort for any other value since we don't know the length of the field
}
if (i > 0) {
ResponseAppend_P(PSTR(","));
}
ResponseAppend_P(PSTR("{\"Cluster\":\"0x%04X\",\"Endpoint\":%d,"), cluster, srcep);
if (Z_Addr_Group == addrmode) { // Group address mode
ResponseAppend_P(PSTR("\"ToGroup\":%d}"), group);
} else if (Z_Addr_IEEEAddress == addrmode) { // IEEE address mode
char hex[20];
Uint64toHex(dstaddr, hex, 64);
ResponseAppend_P(PSTR("\"ToDevice\":\"0x%s\",\"ToEndpoint\":%d}"), hex, dstep);
}
}
ResponseAppend_P(PSTR("]}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_BIND_STATE));
return -1;
}
// Return false, true or null (if unknown)
const char * TrueFalseNull(uint32_t value) {
if (value == 0) {
return PSTR("false");
} else if (value == 1) {
return PSTR("true");
} else {
return PSTR("null");
}
}
const char * Z_DeviceRelationship(uint32_t value) {
switch (value) {
case 0: return PSTR("Parent");
case 1: return PSTR("Child");
case 2: return PSTR("Sibling");
case 4: return PSTR("Previous");
case 3:
default: return PSTR("None");
}
}
const char * Z_DeviceType(uint32_t value) {
switch (value) {
case 0: return PSTR("Coordinator");
case 1: return PSTR("Router");
case 2: return PSTR("Device");
default: return PSTR("Unknown");
}
}
//
// Handle MgMt Bind Rsp incoming message
//
int32_t Z_MgmtLqiRsp(int32_t res, const class SBuffer &buf) {
#ifdef USE_ZIGBEE_ZNP
uint16_t shortaddr = buf.get16(2);
uint8_t status = buf.get8(4);
uint8_t lqi_total = buf.get8(5);
uint8_t lqi_start = buf.get8(6);
uint8_t lqi_len = buf.get8(7);
const size_t prefix_len = 8;
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
uint16_t shortaddr = buf.get16(buf.len()-2);
uint8_t status = buf.get8(0);
uint8_t lqi_total = buf.get8(1);
uint8_t lqi_start = buf.get8(2);
uint8_t lqi_len = buf.get8(3);
const size_t prefix_len = 4;
#endif // USE_ZIGBEE_EZSP
const char * friendlyName = zigbee_devices.getFriendlyName(shortaddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_MAP "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""), shortaddr);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
",\"MapTotal\":%d"
",\"MapStart\":%d"
",\"Map\":["
), status, getZigbeeStatusMessage(status).c_str(), lqi_total, lqi_start + 1);
uint32_t idx = prefix_len;
for (uint32_t i = 0; i < lqi_len; i++) {
if (idx + 22 > buf.len()) { break; } // size 22 for EZSP
//uint64_t extpanid = buf.get16(idx); // unused
// uint64_t m_longaddr = buf.get64(idx + 8);
uint16_t m_shortaddr = buf.get16(idx + 16);
uint8_t m_dev_type = buf.get8(idx + 18);
uint8_t m_permitjoin = buf.get8(idx + 19);
uint8_t m_depth = buf.get8(idx + 20);
uint8_t m_lqi = buf.get8(idx + 21);
idx += 22;
if (i > 0) {
ResponseAppend_P(PSTR(","));
}
ResponseAppend_P(PSTR("{\"Device\":\"0x%04X\","), m_shortaddr);
const char * friendlyName = zigbee_devices.getFriendlyName(m_shortaddr);
if (friendlyName) {
ResponseAppend_P(PSTR("\"Name\":\"%s\","), friendlyName);
}
ResponseAppend_P(PSTR("\"DeviceType\":\"%s\","
"\"RxOnWhenIdle\":%s,"
"\"Relationship\":\"%s\","
"\"PermitJoin\":%s,"
"\"Depth\":%d,"
"\"LinkQuality\":%d"
"}"
),
Z_DeviceType(m_dev_type & 0x03),
TrueFalseNull((m_dev_type & 0x0C) >> 2),
Z_DeviceRelationship((m_dev_type & 0x70) >> 4),
TrueFalseNull(m_permitjoin & 0x02),
m_depth,
m_lqi);
}
ResponseAppend_P(PSTR("]}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_MAP));
return -1;
}
#ifdef USE_ZIGBEE_EZSP
//
// Handle Parent Annonce Rsp incoming message
//
// rsp: true = ZDO_Parent_annce_rsp, false = ZDO_Parent_annce
int32_t EZ_ParentAnnceRsp(int32_t res, const class SBuffer &buf, bool rsp) {
size_t prefix_len;
uint8_t status;
uint8_t num_children;
uint16_t shortaddr = buf.get16(buf.len()-2);
if (rsp) {
status = buf.get8(0);
num_children = buf.get8(1);
prefix_len = 2;
} else {
status = 0;
num_children = buf.get8(0);
prefix_len = 1;
}
const char * friendlyName = zigbee_devices.getFriendlyName(shortaddr);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_PARENT "\":{\"" D_JSON_ZIGBEE_DEVICE "\":\"0x%04X\""), shortaddr);
if (friendlyName) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_NAME "\":\"%s\""), friendlyName);
}
if (rsp) {
ResponseAppend_P(PSTR(",\"" D_JSON_ZIGBEE_STATUS "\":%d"
",\"" D_JSON_ZIGBEE_STATUS_MSG "\":\"%s\""
), status, getZigbeeStatusMessage(status).c_str());
}
ResponseAppend_P(PSTR(",\"Children\":%d"
",\"ChildInfo\":["
), num_children);
uint32_t idx = prefix_len;
for (uint32_t i = 0; i < num_children; i++) {
if (idx + 8 > buf.len()) { break; } // overflow, frame size is between 14 and 21
uint64_t child_ieee = buf.get64(idx);
idx += 8;
if (i > 0) {
ResponseAppend_P(PSTR(","));
}
char hex[20];
Uint64toHex(child_ieee, hex, 64);
ResponseAppend_P(PSTR("\"0x%s\""), hex);
}
ResponseAppend_P(PSTR("]}}"));
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_BIND_STATE));
return -1;
}
#endif // USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Send specific ZNP messages
\*********************************************************************************************/
//
// Send ZDO_IEEE_ADDR_REQ request to get IEEE long address
//
void Z_SendIEEEAddrReq(uint16_t shortaddr) {
#ifdef USE_ZIGBEE_ZNP
uint8_t IEEEAddrReq[] = { Z_SREQ | Z_ZDO, ZDO_IEEE_ADDR_REQ, Z_B0(shortaddr), Z_B1(shortaddr), 0x00, 0x00 };
ZigbeeZNPSend(IEEEAddrReq, sizeof(IEEEAddrReq));
#endif
#ifdef USE_ZIGBEE_EZSP
uint8_t IEEEAddrReq[] = { Z_B0(shortaddr), Z_B1(shortaddr), 0x00, 0x00 };
EZ_SendZDO(shortaddr, ZDO_IEEE_addr_req, IEEEAddrReq, sizeof(IEEEAddrReq));
#endif
}
//
// Send ACTIVE_EP_REQ to collect active endpoints for this address
//
void Z_SendActiveEpReq(uint16_t shortaddr) {
#ifdef USE_ZIGBEE_ZNP
uint8_t ActiveEpReq[] = { Z_SREQ | Z_ZDO, ZDO_ACTIVE_EP_REQ, Z_B0(shortaddr), Z_B1(shortaddr), Z_B0(shortaddr), Z_B1(shortaddr) };
ZigbeeZNPSend(ActiveEpReq, sizeof(ActiveEpReq));
#endif
#ifdef USE_ZIGBEE_EZSP
uint8_t ActiveEpReq[] = { Z_B0(shortaddr), Z_B1(shortaddr) };
EZ_SendZDO(shortaddr, ZDO_Active_EP_req, ActiveEpReq, sizeof(ActiveEpReq));
#endif
}
//
// Probe the clusters_out on the first endpoint
//
// Send ZDO_SIMPLE_DESC_REQ to get full list of supported Clusters for a specific endpoint
void Z_SendSimpleDescReq(uint16_t shortaddr, uint16_t groupaddr, uint16_t cluster, uint8_t endpoint, uint32_t value) {
#ifdef USE_ZIGBEE_ZNP
uint8_t SimpleDescReq[] = { Z_SREQ | Z_ZDO, ZDO_SIMPLE_DESC_REQ, // 2504
Z_B0(shortaddr), Z_B1(shortaddr), Z_B0(shortaddr), Z_B1(shortaddr),
endpoint };
ZigbeeZNPSend(SimpleDescReq, sizeof(SimpleDescReq));
#endif
#ifdef USE_ZIGBEE_EZSP
uint8_t SimpleDescReq[] = { Z_B0(shortaddr), Z_B1(shortaddr), endpoint };
EZ_SendZDO(shortaddr, ZDO_SIMPLE_DESC_REQ, SimpleDescReq, sizeof(SimpleDescReq));
#endif
}
//
// Send AF Info Request
// Queue requests for the device
// 1. Request for 'ModelId' and 'Manufacturer': 0000/0005, 0000/0006
// 2. Auto-bind to coordinator:
// Iterate among
//
void Z_SendDeviceInfoRequest(uint16_t shortaddr) {
uint8_t endpoint = zigbee_devices.findFirstEndpoint(shortaddr);
if (0x00 == endpoint) { endpoint = 0x01; } // if we don't know the endpoint, try 0x01
uint8_t transacid = zigbee_devices.getNextSeqNumber(shortaddr);
uint8_t InfoReq[] = { 0x04, 0x00, 0x05, 0x00 };
ZigbeeZCLSend_Raw(ZigbeeZCLSendMessage({
shortaddr,
0x0000, /* group */
0x0000 /*cluster*/,
endpoint,
ZCL_READ_ATTRIBUTES,
0x0000, /* manuf */
false /* not cluster specific */,
true /* response */,
false /* discover route */,
transacid, /* zcl transaction id */
InfoReq, sizeof(InfoReq)
}));
}
//
// Send sing attribute read request in Timer
//
void Z_SendSingleAttributeRead(uint16_t shortaddr, uint16_t groupaddr, uint16_t cluster, uint8_t endpoint, uint32_t value) {
uint8_t transacid = zigbee_devices.getNextSeqNumber(shortaddr);
uint8_t InfoReq[2] = { Z_B0(value), Z_B1(value) }; // list of single attribute
ZigbeeZCLSend_Raw(ZigbeeZCLSendMessage({
shortaddr,
0x0000, /* group */
cluster /*cluster*/,
endpoint,
ZCL_READ_ATTRIBUTES,
0x0000, /* manuf */
false /* not cluster specific */,
true /* response */,
false /* discover route */,
transacid, /* zcl transaction id */
InfoReq, sizeof(InfoReq)
}));
}
//
// Auto-bind some clusters to the coordinator's endpoint 0x01
//
void Z_AutoBind(uint16_t shortaddr, uint16_t groupaddr, uint16_t cluster, uint8_t endpoint, uint32_t value) {
uint64_t srcLongAddr = zigbee_devices.getDeviceLongAddr(shortaddr);
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE "auto-bind `ZbBind {\"Device\":\"0x%04X\",\"Endpoint\":%d,\"Cluster\":\"0x%04X\"}`"),
shortaddr, endpoint, cluster);
#ifdef USE_ZIGBEE_ZNP
SBuffer buf(34);
buf.add8(Z_SREQ | Z_ZDO);
buf.add8(ZDO_BIND_REQ);
buf.add16(shortaddr);
buf.add64(srcLongAddr);
buf.add8(endpoint);
buf.add16(cluster);
buf.add8(Z_Addr_IEEEAddress); // DstAddrMode - 0x03 = ADDRESS_64_BIT
buf.add64(localIEEEAddr);
buf.add8(0x01); // toEndpoint
ZigbeeZNPSend(buf.getBuffer(), buf.len());
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
SBuffer buf(24);
// ZDO message payload (see Zigbee spec 2.4.3.2.2)
buf.add64(srcLongAddr);
buf.add8(endpoint);
buf.add16(cluster);
buf.add8(Z_Addr_IEEEAddress); // DstAddrMode - 0x03 = ADDRESS_64_BIT
buf.add64(localIEEEAddr);
buf.add8(0x01); // toEndpoint
EZ_SendZDO(shortaddr, ZDO_BIND_REQ, buf.buf(), buf.len());
#endif // USE_ZIGBEE_EZSP
}
//
// Auto-bind some clusters to the coordinator's endpoint 0x01
//
// the structure below indicates which attributes need to be configured for attribute reporting
typedef struct Z_autoAttributeReporting_t {
uint16_t cluster;
uint16_t attr_id;
uint16_t min_interval; // minimum interval in seconds (consecutive reports won't happen before this value)
uint16_t max_interval; // maximum interval in seconds (attribut will always be reported after this interval)
float report_change; // for non discrete attributes, the value change that triggers a report
} Z_autoAttributeReporting_t;
// Note the attribute must be registered in the converter list, used to retrieve the type of the attribute
const Z_autoAttributeReporting_t Z_autoAttributeReporting[] PROGMEM = {
{ 0x0001, 0x0020, 60*60, 4*60*60, 0.1 }, // BatteryVoltage
{ 0x0001, 0x0021, 60*60, 4*60*60, 1 }, // BatteryPercentage
{ 0x0006, 0x0000, 1, 60*60, 0 }, // Power
{ 0x0201, 0x0000, 60, 60*10, 0.5 }, // LocalTemperature
{ 0x0201, 0x0008, 60, 60*10, 10 }, // PIHeatingDemand
{ 0x0201, 0x0012, 60, 60*10, 0.5 }, // OccupiedHeatingSetpoint
{ 0x0008, 0x0000, 1, 60*60, 5 }, // Dimmer
{ 0x0300, 0x0000, 1, 60*60, 5 }, // Hue
{ 0x0300, 0x0001, 1, 60*60, 5 }, // Sat
{ 0x0300, 0x0003, 1, 60*60, 100 }, // X
{ 0x0300, 0x0004, 1, 60*60, 100 }, // Y
{ 0x0300, 0x0007, 1, 60*60, 5 }, // CT
{ 0x0300, 0x0008, 1, 60*60, 0 }, // ColorMode
{ 0x0400, 0x0000, 10, 60*60, 5 }, // Illuminance (5 lux)
{ 0x0402, 0x0000, 30, 60*60, 0.2 }, // Temperature (0.2 °C)
{ 0x0403, 0x0000, 30, 60*60, 1 }, // Pressure (1 hPa)
{ 0x0405, 0x0000, 30, 60*60, 1.0 }, // Humidity (1 %)
{ 0x0406, 0x0000, 10, 60*60, 0 }, // Occupancy
{ 0x0500, 0x0002, 1, 60*60, 0 }, // ZoneStatus
};
//
// Called by Device Auto-config
// Configures default values for the most common Attribute Rerporting configurations
//
// Note: must be of type `Z_DeviceTimer`
void Z_AutoConfigReportingForCluster(uint16_t shortaddr, uint16_t groupaddr, uint16_t cluster, uint8_t endpoint, uint32_t value) {
// Buffer, max 12 bytes per attribute
SBuffer buf(12*6);
Response_P(PSTR("ZbSend {\"Device\":\"0x%04X\",\"Config\":{"), shortaddr);
boolean comma = false;
for (uint32_t i=0; i<ARRAY_SIZE(Z_autoAttributeReporting); i++) {
uint16_t conv_cluster = pgm_read_word(&(Z_autoAttributeReporting[i].cluster));
uint16_t attr_id = pgm_read_word(&(Z_autoAttributeReporting[i].attr_id));
if (conv_cluster == cluster) {
uint16_t min_interval = pgm_read_word(&(Z_autoAttributeReporting[i].min_interval));
uint16_t max_interval = pgm_read_word(&(Z_autoAttributeReporting[i].max_interval));
float report_change_raw = Z_autoAttributeReporting[i].report_change;
double report_change = report_change_raw;
uint8_t attr_type;
int8_t multiplier;
const __FlashStringHelper* attr_name = zigbeeFindAttributeById(cluster, attr_id, &attr_type, &multiplier);
if (attr_name) {
if (comma) { ResponseAppend_P(PSTR(",")); }
comma = true;
ResponseAppend_P(PSTR("\"%s\":{\"MinInterval\":%d,\"MaxInterval\":%d"), attr_name, min_interval, max_interval);
buf.add8(0); // direction, always 0
buf.add16(attr_id);
buf.add8(attr_type);
buf.add16(min_interval);
buf.add16(max_interval);
if (!Z_isDiscreteDataType(attr_type)) { // report_change is only valid for non-discrete data types (numbers)
ZbApplyMultiplier(report_change, multiplier);
// encode value
int32_t res = encodeSingleAttribute(buf, report_change, "", attr_type);
if (res < 0) {
AddLog_P2(LOG_LEVEL_ERROR, PSTR(D_LOG_ZIGBEE "internal error, unsupported attribute type"));
} else {
Z_attribute attr;
attr.setKeyName(PSTR("ReportableChange"), true); // true because in PMEM
attr.setFloat(report_change_raw);
ResponseAppend_P(PSTR(",%s"), attr.toString().c_str());
}
}
ResponseAppend_P(PSTR("}"));
}
}
}
ResponseAppend_P(PSTR("}}"));
if (buf.len() > 0) {
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE "auto-bind `%s`"), TasmotaGlobal.mqtt_data);
ZigbeeZCLSend_Raw(ZigbeeZCLSendMessage({
shortaddr,
0x0000, /* group */
cluster /*cluster*/,
endpoint,
ZCL_CONFIGURE_REPORTING,
0x0000, /* manuf */
false /* not cluster specific */,
false /* no response */,
false /* discover route */,
zigbee_devices.getNextSeqNumber(shortaddr), /* zcl transaction id */
buf.buf(), buf.len()
}));
}
}
//
// Handle trustCenterJoinHandler
// 2400
//
#ifdef USE_ZIGBEE_EZSP
int32_t EZ_ReceiveTCJoinHandler(int32_t res, const class SBuffer &buf) {
uint16_t srcAddr = buf.get16(2);
uint64_t ieeeAddr = buf.get64(4);
uint8_t status = buf.get8(12);
uint8_t decision = buf.get8(13);
uint16_t parentNw = buf.get16(14);
if (EMBER_DEVICE_LEFT != status) { // ignore message if the device is leaving
zigbee_devices.updateDevice(srcAddr, ieeeAddr);
char hex[20];
Uint64toHex(ieeeAddr, hex, 64);
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{"
"\"Status\":%d,\"IEEEAddr\":\"0x%s\",\"ShortAddr\":\"0x%04X\""
",\"ParentNetwork\":\"0x%04X\""
",\"Status\":%d,\"Decision\":%d"
"}}"),
ZIGBEE_STATUS_DEVICE_INDICATION, hex, srcAddr, parentNw,
status, decision
);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEEZCL_RECEIVED));
}
return -1;
}
#endif // USE_ZIGBEE_EZSP
//
// Parse incoming ZCL message.
//
// This code is common to ZNP and EZSP
void Z_IncomingMessage(class ZCLFrame &zcl_received) {
uint16_t srcaddr = zcl_received.getSrcAddr();
uint16_t groupid = zcl_received.getGroupAddr();
uint16_t clusterid = zcl_received.getClusterId();
uint8_t linkquality = zcl_received.getLinkQuality();
uint8_t srcendpoint = zcl_received.getSrcEndpoint();
linkquality = linkquality != 0xFF ? linkquality : 0xFE; // avoid 0xFF (reserved for unknown)
bool defer_attributes = false; // do we defer attributes reporting to coalesce
// log the packet details
zcl_received.log();
Z_Device & device = zigbee_devices.getShortAddr(srcaddr);
if (srcaddr != localShortAddr) {
device.setLQI(linkquality != 0xFF ? linkquality : 0xFE); // EFR32 has a different scale for LQI
device.setLastSeenNow();
}
char shortaddr[8];
snprintf_P(shortaddr, sizeof(shortaddr), PSTR("0x%04X"), srcaddr);
Z_attribute_list attr_list;
attr_list.lqi = linkquality;
attr_list.src_ep = srcendpoint;
if (groupid) { // TODO we miss the group_id == 0 here
attr_list.group_id = groupid;
}
if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_DEFAULT_RESPONSE == zcl_received.getCmdId())) {
zcl_received.parseResponse(); // Zigbee general "Default Response", publish ZbResponse message
} else {
// Build the ZbReceive list
if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_REPORT_ATTRIBUTES == zcl_received.getCmdId())) {
zcl_received.parseReportAttributes(attr_list); // Zigbee report attributes from sensors
if (clusterid) { defer_attributes = true; } // don't defer system Cluster=0 messages
} else if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_READ_ATTRIBUTES_RESPONSE == zcl_received.getCmdId())) {
zcl_received.parseReadAttributesResponse(attr_list);
if (clusterid) { defer_attributes = true; } // don't defer system Cluster=0 messages
} else if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_READ_ATTRIBUTES == zcl_received.getCmdId())) {
zcl_received.parseReadAttributes(attr_list);
// never defer read_attributes, so the auto-responder can send response back on a per cluster basis
} else if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_READ_REPORTING_CONFIGURATION_RESPONSE == zcl_received.getCmdId())) {
zcl_received.parseReadConfigAttributes(attr_list);
} else if ( (!zcl_received.isClusterSpecificCommand()) && (ZCL_CONFIGURE_REPORTING_RESPONSE == zcl_received.getCmdId())) {
zcl_received.parseConfigAttributes(attr_list);
} else if (zcl_received.isClusterSpecificCommand()) {
zcl_received.parseClusterSpecificCommand(attr_list);
}
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE D_JSON_ZIGBEEZCL_RAW_RECEIVED ": {\"0x%04X\":{%s}}"), srcaddr, attr_list.toString().c_str());
// discard the message if it was sent by us (broadcast or group loopback)
if (srcaddr == localShortAddr) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_ZIGBEE "loopback message, ignoring"));
return; // abort the rest of message management
}
zcl_received.generateSyntheticAttributes(attr_list);
zcl_received.computeSyntheticAttributes(attr_list);
zcl_received.generateCallBacks(attr_list); // set deferred callbacks, ex: Occupancy
Z_postProcessAttributes(srcaddr, zcl_received.getSrcEndpoint(), attr_list);
// since we just receveived data from the device, it is reachable
zigbee_devices.resetTimersForDevice(srcaddr, 0 /* groupaddr */, Z_CAT_REACHABILITY); // remove any reachability timer already there
device.setReachable(true); // mark device as reachable
if (defer_attributes) {
// Prepare for publish
if (zigbee_devices.jsonIsConflict(srcaddr, attr_list)) {
// there is conflicting values, force a publish of the previous message now and don't coalesce
zigbee_devices.jsonPublishFlush(srcaddr);
}
zigbee_devices.jsonAppend(srcaddr, attr_list);
zigbee_devices.setTimer(srcaddr, 0 /* groupaddr */, USE_ZIGBEE_COALESCE_ATTR_TIMER, clusterid, srcendpoint, Z_CAT_READ_ATTR, 0, &Z_PublishAttributes);
} else {
// Publish immediately
zigbee_devices.jsonPublishNow(srcaddr, attr_list);
}
}
}
#ifdef USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Send ZDO Message
\*********************************************************************************************/
void EZ_SendZDO(uint16_t shortaddr, uint16_t cmd, const unsigned char *payload, size_t payload_len) {
SBuffer buf(payload_len + 22);
uint8_t seq = zigbee_devices.getNextSeqNumber(0x0000);
if (shortaddr < 0xFFFC) {
// send unicast
buf.add16(EZSP_sendUnicast);
buf.add8(EMBER_OUTGOING_DIRECT); // 00
buf.add16(shortaddr); // dest addr
// ApsFrame
buf.add16(0x0000); // ZOD profile
buf.add16(cmd); // ZDO cmd in cluster
buf.add8(0); // srcEp
buf.add8(0); // dstEp
buf.add16(EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY | EMBER_APS_OPTION_RETRY); // APS frame
buf.add16(0x0000); // groupId
buf.add8(seq);
// end of ApsFrame
buf.add8(0x01); // tag TODO
buf.add8(payload_len + 1); // insert seq number
buf.add8(seq);
buf.addBuffer(payload, payload_len);
} else {
// send broadcast
buf.add16(EZSP_sendBroadcast);
buf.add16(shortaddr); // dest addr
// ApsFrame
buf.add16(0x0000); // ZOD profile
buf.add16(cmd); // ZDO cmd in cluster
buf.add8(0); // srcEp
buf.add8(0); // dstEp
buf.add16(0x00); // APS frame
buf.add16(0x0000); // groupId
buf.add8(seq);
// end of ApsFrame
buf.add8(0x1E); // radius
buf.add8(0x01); // tag TODO
buf.add8(payload_len + 1); // insert seq number
buf.add8(seq);
buf.addBuffer(payload, payload_len);
}
ZigbeeEZSPSendCmd(buf.buf(), buf.len());
}
/*********************************************************************************************\
* Send specific EZSP messages
\*********************************************************************************************/
int32_t EZ_IncomingMessage(int32_t res, const class SBuffer &buf) {
uint8_t msgtype = buf.get8(2); // see EZSP_EmberIncomingMessageType
bool wasbroadcast = (msgtype >= EMBER_INCOMING_MULTICAST) && (msgtype <= EMBER_INCOMING_BROADCAST_LOOPBACK);
uint16_t profileid = buf.get16(3); // HA = 0x0104, ZDO = 0x0000
uint16_t clusterid = buf.get16(5);
uint8_t srcendpoint = buf.get8(7);
uint8_t dstendpoint = buf.get8(8);
uint16_t apsoptions = buf.get16(9); // see EZSP_EmberApsOption, usually EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY
bool securityuse = (apsoptions & EMBER_APS_OPTION_ENCRYPTION) ? true : false;
uint16_t groupid = buf.get16(11);
uint8_t seqnumber = buf.get8(13);
int8_t linkrssi = buf.get8(15);
uint8_t linkquality = ZNP_RSSI2Lqi(linkrssi); // don't take EZSP LQI but calculate our own based on ZNP
uint16_t srcaddr = buf.get16(16);
// uint8_t bindingindex = buf.get8(18); // not sure we need this one as a coordinator
// uint8_t addressindex = buf.get8(19); // not sure how to handle this one
// offset 20 is len, and buffer starts at offset 21
if ((0x0000 == profileid) && (0x00 == srcendpoint)) {
// ZDO request
// Report LQI
if (srcaddr != localShortAddr) {
Z_Device & device = zigbee_devices.getShortAddr(srcaddr);
device.setLQI(linkquality);
device.setLastSeenNow();
}
// Since ZDO messages start with a sequence number, we skip it
// but we add the source address in the last 2 bytes
SBuffer zdo_buf(buf.get8(20) - 1 + 2);
zdo_buf.addBuffer(buf.buf(22), buf.get8(20) - 1);
zdo_buf.add16(srcaddr);
switch (clusterid) {
case ZDO_Device_annce:
return Z_ReceiveEndDeviceAnnonce(res, zdo_buf);
case ZDO_Active_EP_rsp:
return Z_ReceiveActiveEp(res, zdo_buf);
case ZDO_IEEE_addr_rsp:
return Z_ReceiveIEEEAddr(res, zdo_buf);
case ZDO_Simple_Desc_rsp:
return Z_ReceiveSimpleDesc(res, zdo_buf);
case ZDO_Bind_rsp:
return Z_BindRsp(res, zdo_buf);
case ZDO_Unbind_rsp:
return Z_UnbindRsp(res, zdo_buf);
case ZDO_Mgmt_Lqi_rsp:
return Z_MgmtLqiRsp(res, zdo_buf);
case ZDO_Mgmt_Bind_rsp:
return Z_MgmtBindRsp(res, zdo_buf);
case ZDO_Parent_annce:
return EZ_ParentAnnceRsp(res, zdo_buf, false);
case ZDO_Parent_annce_rsp:
return EZ_ParentAnnceRsp(res, zdo_buf, true);
default:
// TODO move later to LOG_LEVEL_DEBUG
AddLog_P2(LOG_LEVEL_INFO, PSTR("ZIG: Internal ZDO message 0x%04X sent from 0x%04X %s"), clusterid, srcaddr, wasbroadcast ? PSTR("(broadcast)") : "");
break;
}
} else {
bool defer_attributes = false; // do we defer attributes reporting to coalesce
ZCLFrame zcl_received = ZCLFrame::parseRawFrame(buf, 21, buf.get8(20), clusterid, groupid,
srcaddr,
srcendpoint, dstendpoint, wasbroadcast,
linkquality, securityuse, seqnumber);
//
Z_IncomingMessage(zcl_received);
}
return -1;
}
//
// Callback for resetting the NCP, called by the state machine
//
// value = 0 : drive reset pin and halt MCU
// value = 1 : release the reset pin, restart
int32_t EZ_Reset_Device(uint8_t value) {
/*
// we use Led4i to drive the reset pin. Since it is reverted we need to pass 1 to start reset, and 0 to release reset
if (PinUsed(GPIO_LED1, ZIGBEE_EZSP_RESET_LED - 1)) {
SetLedPowerIdx(ZIGBEE_EZSP_RESET_LED - 1, value ? 0 : 1);
*/
if (PinUsed(GPIO_ZIGBEE_RST)) {
digitalWrite(Pin(GPIO_ZIGBEE_RST), value);
} else {
// no GPIO so we use software Reset instead
if (value) { // send reset only when we are supposed to release reset
uint8_t ezsp_reset[1] = { 0xC0 }; // EZSP ASH Reset
ZigbeeEZSPSendRaw(ezsp_reset, sizeof(ezsp_reset), true);
}
}
return 0; // continue
}
/*********************************************************************************************\
* Default resolver
\*********************************************************************************************/
int32_t EZ_Recv_Default(int32_t res, const class SBuffer &buf) {
// Default message handler for new messages
if (zigbee.init_phase) {
// if still during initialization phase, ignore any unexpected message
return -1; // ignore message
} else {
uint16_t ezsp_command_index = buf.get16(0);
switch (ezsp_command_index) {
case EZSP_incomingMessageHandler:
return EZ_IncomingMessage(res, buf);
break;
case EZSP_trustCenterJoinHandler:
return EZ_ReceiveTCJoinHandler(res, buf);
break;
case EZSP_incomingRouteErrorHandler:
return EZ_RouteError(res, buf);
break;
case EZSP_permitJoining:
return EZ_PermitJoinRsp(res, buf);
break;
case EZSP_messageSentHandler:
return EZ_MessageSent(res, buf);
break;
}
return -1;
}
}
#endif // USE_ZIGBEE_EZSP
/*********************************************************************************************\
* Callbacks
\*********************************************************************************************/
// Publish the received values once they have been coalesced
void Z_PublishAttributes(uint16_t shortaddr, uint16_t groupaddr, uint16_t cluster, uint8_t endpoint, uint32_t value) {
zigbee_devices.jsonPublishFlush(shortaddr);
}
/*********************************************************************************************\
* Global dispatcher for incoming messages
\*********************************************************************************************/
#ifdef USE_ZIGBEE_ZNP
//
// Callback for resetting the NCP, called by the state machine
//
// value = 0 : drive reset pin and halt MCU
// value = 1 : release the reset pin, restart
int32_t ZNP_Reset_Device(uint8_t value) {
/*
// we use Led4i to drive the reset pin. Since it is reverted we need to pass 1 to start reset, and 0 to release reset
if (PinUsed(GPIO_LED1, ZIGBEE_EZSP_RESET_LED - 1)) {
SetLedPowerIdx(ZIGBEE_EZSP_RESET_LED - 1, value ? 0 : 1);
*/
if (PinUsed(GPIO_ZIGBEE_RST)) {
digitalWrite(Pin(GPIO_ZIGBEE_RST), value);
} else {
// no GPIO so we use software Reset instead
if (value) { // send reset only when we are supposed to release reset
// flush the serial buffer, sending 0xFF 256 times.
ZigbeeZNPFlush();
ZigbeeZNPSend(ZBS_RESET, sizeof(ZBS_RESET));
}
}
return 0; // continue
}
int32_t ZNP_ReceiveAfIncomingMessage(int32_t res, const class SBuffer &buf) {
uint16_t groupid = buf.get16(2);
uint16_t clusterid = buf.get16(4);
uint16_t srcaddr = buf.get16(6);
uint8_t srcendpoint = buf.get8(8);
uint8_t dstendpoint = buf.get8(9);
uint8_t wasbroadcast = buf.get8(10);
uint8_t linkquality = buf.get8(11);
uint8_t securityuse = buf.get8(12);
// uint32_t timestamp = buf.get32(13);
uint8_t seqnumber = buf.get8(17);
bool defer_attributes = false; // do we defer attributes reporting to coalesce
ZCLFrame zcl_received = ZCLFrame::parseRawFrame(buf, 19, buf.get8(18), clusterid, groupid,
srcaddr,
srcendpoint, dstendpoint, wasbroadcast,
linkquality, securityuse, seqnumber);
//
Z_IncomingMessage(zcl_received);
return -1;
}
#endif // USE_ZIGBEE_ZNP
/*********************************************************************************************\
* Global dispatcher for incoming messages
\*********************************************************************************************/
#ifdef USE_ZIGBEE_ZNP
// Structure for the Dispatcher callbacks table
typedef struct Z_Dispatcher {
uint8_t match[2];
ZB_RecvMsgFunc func;
} Z_Dispatcher;
// Dispatcher callbacks table
const Z_Dispatcher Z_DispatchTable[] PROGMEM = {
{ { Z_AREQ | Z_AF, AF_DATA_CONFIRM }, &ZNP_DataConfirm }, // 4480
{ { Z_AREQ | Z_AF, AF_INCOMING_MSG }, &ZNP_ReceiveAfIncomingMessage }, // 4481
// { { Z_AREQ | Z_ZDO, ZDO_STATE_CHANGE_IND }, &ZNP_ReceiveStateChange }, // 45C0
{ { Z_AREQ | Z_ZDO, ZDO_END_DEVICE_ANNCE_IND }, &Z_ReceiveEndDeviceAnnonce }, // 45C1
{ { Z_AREQ | Z_ZDO, ZDO_TC_DEV_IND }, &ZNP_ReceiveTCDevInd }, // 45CA
{ { Z_AREQ | Z_ZDO, ZDO_PERMIT_JOIN_IND }, &ZNP_ReceivePermitJoinStatus }, // 45CB
{ { Z_AREQ | Z_ZDO, ZDO_NODE_DESC_RSP }, &ZNP_ReceiveNodeDesc }, // 4582
{ { Z_AREQ | Z_ZDO, ZDO_ACTIVE_EP_RSP }, &Z_ReceiveActiveEp }, // 4585
{ { Z_AREQ | Z_ZDO, ZDO_SIMPLE_DESC_RSP}, &Z_ReceiveSimpleDesc}, // 4584
{ { Z_AREQ | Z_ZDO, ZDO_IEEE_ADDR_RSP }, &Z_ReceiveIEEEAddr }, // 4581
{ { Z_AREQ | Z_ZDO, ZDO_BIND_RSP }, &Z_BindRsp }, // 45A1
{ { Z_AREQ | Z_ZDO, ZDO_UNBIND_RSP }, &Z_UnbindRsp }, // 45A2
{ { Z_AREQ | Z_ZDO, ZDO_MGMT_LQI_RSP }, &Z_MgmtLqiRsp }, // 45B1
{ { Z_AREQ | Z_ZDO, ZDO_MGMT_BIND_RSP }, &Z_MgmtBindRsp }, // 45B3
};
/*********************************************************************************************\
* Default resolver
\*********************************************************************************************/
int32_t ZNP_Recv_Default(int32_t res, const class SBuffer &buf) {
// Default message handler for new messages
if (zigbee.init_phase) {
// if still during initialization phase, ignore any unexpected message
return -1; // ignore message
} else {
for (uint32_t i = 0; i < ARRAY_SIZE(Z_DispatchTable); i++) {
if (Z_ReceiveMatchPrefix(buf, Z_DispatchTable[i].match)) {
(*Z_DispatchTable[i].func)(res, buf);
}
}
return -1;
}
}
#endif // USE_ZIGBEE_ZNP
/*********************************************************************************************\
* Functions called by State Machine
\*********************************************************************************************/
//
// Callback for loading Zigbee configuration from Flash, called by the state machine
//
int32_t Z_Load_Devices(uint8_t value) {
// try to hidrate from known devices
loadZigbeeDevices();
return 0; // continue
}
//
// Query the state of a bulb (light) if its type allows it
//
void Z_Query_Bulb(uint16_t shortaddr, uint32_t &wait_ms) {
const uint32_t inter_message_ms = 100; // wait 100ms between messages
if (0 <= zigbee_devices.getHueBulbtype(shortaddr)) {
uint8_t endpoint = zigbee_devices.findFirstEndpoint(shortaddr);
if (endpoint) { // send only if we know the endpoint
zigbee_devices.setTimer(shortaddr, 0 /* groupaddr */, wait_ms, 0x0006, endpoint, Z_CAT_READ_CLUSTER, 0 /* value */, &Z_ReadAttrCallback);
wait_ms += inter_message_ms;
zigbee_devices.setTimer(shortaddr, 0 /* groupaddr */, wait_ms, 0x0008, endpoint, Z_CAT_READ_CLUSTER, 0 /* value */, &Z_ReadAttrCallback);
wait_ms += inter_message_ms;
zigbee_devices.setTimer(shortaddr, 0 /* groupaddr */, wait_ms, 0x0300, endpoint, Z_CAT_READ_CLUSTER, 0 /* value */, &Z_ReadAttrCallback);
wait_ms += inter_message_ms;
zigbee_devices.setTimer(shortaddr, 0, wait_ms + Z_CAT_REACHABILITY_TIMEOUT, 0, endpoint, Z_CAT_REACHABILITY, 0 /* value */, &Z_Unreachable);
wait_ms += 1000; // wait 1 second between devices
}
}
}
//
// Send messages to query the state of each Hue emulated light
//
int32_t Z_Query_Bulbs(uint8_t value) {
// Scan all devices and send deferred requests to know the state of bulbs
uint32_t wait_ms = 1000; // start with 1.0 s delay
for (uint32_t i = 0; i < zigbee_devices.devicesSize(); i++) {
const Z_Device &device = zigbee_devices.devicesAt(i);
Z_Query_Bulb(device.shortaddr, wait_ms);
}
return 0; // continue
}
//
// Zigbee initialization is complete, let the party begin
//
int32_t Z_State_Ready(uint8_t value) {
zigbee.init_phase = false; // initialization phase complete
return 0; // continue
}
//
// Auto-responder for Read request from extenal devices.
//
// Mostly used for routers/end-devices
// json: holds the attributes in JSON format
void ZCLFrame::autoResponder(const uint16_t *attr_list_ids, size_t attr_len) {
Z_attribute_list attr_list;
for (uint32_t i=0; i<attr_len; i++) {
uint16_t attr_id = attr_list_ids[i];
uint32_t ccccaaaa = (_cluster_id << 16) | attr_id;
Z_attribute attr;
attr.setKeyId(_cluster_id, attr_id);
switch (ccccaaaa) {
case 0x00000004: attr.setStr(PSTR(USE_ZIGBEE_MANUFACTURER)); break; // Manufacturer
case 0x00000005: attr.setStr(PSTR(USE_ZIGBEE_MODELID)); break; // ModelId
#ifdef USE_LIGHT
case 0x00060000: attr.setUInt(Light.power ? 1 : 0); break; // Power
case 0x00080000: attr.setUInt(LightGetDimmer(0)); break; // Dimmer
case 0x03000000: // Hue
case 0x03000001: // Sat
case 0x03000003: // X
case 0x03000004: // Y
case 0x03000007: // CT
{
uint16_t hue;
uint8_t sat;
float XY[2];
LightGetHSB(&hue, &sat, nullptr);
LightGetXY(&XY[0], &XY[1]);
uint16_t uxy[2];
for (uint32_t i = 0; i < ARRAY_SIZE(XY); i++) {
uxy[i] = XY[i] * 65536.0f;
uxy[i] = (uxy[i] > 0xFEFF) ? uxy[i] : 0xFEFF;
}
if (0x0000 == attr_id) { attr.setUInt(changeUIntScale(hue, 0, 360, 0, 254)); }
if (0x0001 == attr_id) { attr.setUInt(changeUIntScale(sat, 0, 255, 0, 254)); }
if (0x0003 == attr_id) { attr.setUInt(uxy[0]); }
if (0x0004 == attr_id) { attr.setUInt(uxy[1]); }
if (0x0007 == attr_id) { attr.setUInt(LightGetColorTemp()); }
}
break;
#endif
case 0x000A0000: // Time
attr.setUInt((Rtc.utc_time > (60 * 60 * 24 * 365 * 10)) ? Rtc.utc_time - 946684800 : Rtc.utc_time);
break;
case 0x000AFF00: // TimeEpoch - Tasmota specific
attr.setUInt(Rtc.utc_time);
break;
case 0x000A0001: // TimeStatus
attr.setUInt((Rtc.utc_time > (60 * 60 * 24 * 365 * 10)) ? 0x02 : 0x00); // if time is beyond 2010 then we are synchronized
break;
case 0x000A0002: // TimeZone
attr.setUInt(Settings.toffset[0] * 60);
break;
case 0x000A0007: // LocalTime // TODO take DST
attr.setUInt(Settings.toffset[0] * 60 + ((Rtc.utc_time > (60 * 60 * 24 * 365 * 10)) ? Rtc.utc_time - 946684800 : Rtc.utc_time));
break;
}
if (!attr.isNone()) {
Z_parseAttributeKey(attr);
attr_list.addAttribute(_cluster_id, attr_id) = attr;
}
}
SBuffer buf(200);
for (const auto & attr : attr_list) {
if (!ZbAppendWriteBuf(buf, attr, true)) { // true = need status indicator in Read Attribute Responses
return; // error
}
}
if (buf.len() > 0) {
// we have a non-empty output
// log first
AddLog_P2(LOG_LEVEL_INFO, PSTR("ZIG: Auto-responder: ZbSend {\"Device\":\"0x%04X\""
",\"Cluster\":\"0x%04X\""
",\"Endpoint\":%d"
",\"Response\":%s}"
),
_srcaddr, _cluster_id, _srcendpoint,
attr_list.toString().c_str());
// send
// all good, send the packet
ZigbeeZCLSend_Raw(ZigbeeZCLSendMessage({
_srcaddr,
0x0000,
_cluster_id /*cluster*/,
_srcendpoint,
ZCL_READ_ATTRIBUTES_RESPONSE,
0x0000, /* manuf */
false /* not cluster specific */,
false /* no response */,
true /* direct response */,
_transact_seq, /* zcl transaction id */
buf.getBuffer(), buf.len()
}));
}
}
#endif // USE_ZIGBEE
Reference in New Issue View Git Blame Copy Permalink