mirror of https://github.com/arendst/Tasmota.git
249 lines
8.2 KiB
C++
249 lines
8.2 KiB
C++
/*
|
|
xnrg_02_cse7766.ino - CSE7766 energy sensor support for Sonoff-Tasmota
|
|
|
|
Copyright (C) 2018 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_ENERGY_SENSOR
|
|
#ifdef USE_CSE7766
|
|
/*********************************************************************************************\
|
|
* CSE7766 - Energy (Sonoff S31 and Sonoff Pow R2)
|
|
*
|
|
* Based on datasheet from http://www.chipsea.com/UploadFiles/2017/08/11144342F01B5662.pdf
|
|
\*********************************************************************************************/
|
|
|
|
#define XNRG_02 2
|
|
|
|
#define CSE_NOT_CALIBRATED 0xAA
|
|
|
|
#define CSE_PULSES_NOT_INITIALIZED -1
|
|
|
|
#define CSE_PREF 1000
|
|
#define CSE_UREF 100
|
|
|
|
uint8_t cse_receive_flag = 0;
|
|
|
|
long voltage_cycle = 0;
|
|
long current_cycle = 0;
|
|
long power_cycle = 0;
|
|
unsigned long power_cycle_first = 0;
|
|
long cf_pulses = 0;
|
|
long cf_pulses_last_time = CSE_PULSES_NOT_INITIALIZED;
|
|
|
|
void CseReceived()
|
|
{
|
|
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
|
// 55 5A 02 F7 60 00 03 AB 00 40 10 02 60 5D 51 A6 58 03 E9 EF 71 0B 7A 36
|
|
// Hd Id VCal---- Voltage- ICal---- Current- PCal---- Power--- Ad CF--- Ck
|
|
|
|
uint8_t header = serial_in_buffer[0];
|
|
if ((header & 0xFC) == 0xFC) {
|
|
AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: Abnormal hardware"));
|
|
return;
|
|
}
|
|
|
|
// Get chip calibration data (coefficients) and use as initial defaults
|
|
if (HLW_UREF_PULSE == Settings.energy_voltage_calibration) {
|
|
long voltage_coefficient = 191200; // uSec
|
|
if (CSE_NOT_CALIBRATED != header) {
|
|
voltage_coefficient = serial_in_buffer[2] << 16 | serial_in_buffer[3] << 8 | serial_in_buffer[4];
|
|
}
|
|
Settings.energy_voltage_calibration = voltage_coefficient / CSE_UREF;
|
|
}
|
|
if (HLW_IREF_PULSE == Settings.energy_current_calibration) {
|
|
long current_coefficient = 16140; // uSec
|
|
if (CSE_NOT_CALIBRATED != header) {
|
|
current_coefficient = serial_in_buffer[8] << 16 | serial_in_buffer[9] << 8 | serial_in_buffer[10];
|
|
}
|
|
Settings.energy_current_calibration = current_coefficient;
|
|
}
|
|
if (HLW_PREF_PULSE == Settings.energy_power_calibration) {
|
|
long power_coefficient = 5364000; // uSec
|
|
if (CSE_NOT_CALIBRATED != header) {
|
|
power_coefficient = serial_in_buffer[14] << 16 | serial_in_buffer[15] << 8 | serial_in_buffer[16];
|
|
}
|
|
Settings.energy_power_calibration = power_coefficient / CSE_PREF;
|
|
}
|
|
|
|
uint8_t adjustement = serial_in_buffer[20];
|
|
voltage_cycle = serial_in_buffer[5] << 16 | serial_in_buffer[6] << 8 | serial_in_buffer[7];
|
|
current_cycle = serial_in_buffer[11] << 16 | serial_in_buffer[12] << 8 | serial_in_buffer[13];
|
|
power_cycle = serial_in_buffer[17] << 16 | serial_in_buffer[18] << 8 | serial_in_buffer[19];
|
|
cf_pulses = serial_in_buffer[21] << 8 | serial_in_buffer[22];
|
|
|
|
if (energy_power_on) { // Powered on
|
|
if (adjustement & 0x40) { // Voltage valid
|
|
energy_voltage = (float)(Settings.energy_voltage_calibration * CSE_UREF) / (float)voltage_cycle;
|
|
}
|
|
if (adjustement & 0x10) { // Power valid
|
|
if ((header & 0xF2) == 0xF2) { // Power cycle exceeds range
|
|
energy_power = 0;
|
|
} else {
|
|
if (0 == power_cycle_first) power_cycle_first = power_cycle; // Skip first incomplete power_cycle
|
|
if (power_cycle_first != power_cycle) {
|
|
power_cycle_first = -1;
|
|
energy_power = (float)(Settings.energy_power_calibration * CSE_PREF) / (float)power_cycle;
|
|
} else {
|
|
energy_power = 0;
|
|
}
|
|
}
|
|
} else {
|
|
power_cycle_first = 0;
|
|
energy_power = 0; // Powered on but no load
|
|
}
|
|
if (adjustement & 0x20) { // Current valid
|
|
if (0 == energy_power) {
|
|
energy_current = 0;
|
|
} else {
|
|
energy_current = (float)Settings.energy_current_calibration / (float)current_cycle;
|
|
}
|
|
}
|
|
} else { // Powered off
|
|
power_cycle_first = 0;
|
|
energy_voltage = 0;
|
|
energy_power = 0;
|
|
energy_current = 0;
|
|
}
|
|
}
|
|
|
|
bool CseSerialInput()
|
|
{
|
|
if (cse_receive_flag) {
|
|
serial_in_buffer[serial_in_byte_counter++] = serial_in_byte;
|
|
if (24 == serial_in_byte_counter) {
|
|
|
|
AddLogSerial(LOG_LEVEL_DEBUG_MORE);
|
|
|
|
uint8_t checksum = 0;
|
|
for (byte i = 2; i < 23; i++) { checksum += serial_in_buffer[i]; }
|
|
if (checksum == serial_in_buffer[23]) {
|
|
CseReceived();
|
|
cse_receive_flag = 0;
|
|
return 1;
|
|
} else {
|
|
AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: " D_CHECKSUM_FAILURE));
|
|
do { // Sync buffer with data (issue #1907 and #3425)
|
|
memmove(serial_in_buffer, serial_in_buffer +1, 24);
|
|
serial_in_byte_counter--;
|
|
} while ((serial_in_byte_counter > 2) && (0x5A != serial_in_buffer[1]));
|
|
if (0x5A != serial_in_buffer[1]) {
|
|
cse_receive_flag = 0;
|
|
serial_in_byte_counter = 0;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if ((0x5A == serial_in_byte) && (1 == serial_in_byte_counter)) { // 0x5A - Packet header 2
|
|
cse_receive_flag = 1;
|
|
} else {
|
|
serial_in_byte_counter = 0;
|
|
}
|
|
serial_in_buffer[serial_in_byte_counter++] = serial_in_byte;
|
|
}
|
|
serial_in_byte = 0; // Discard
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void CseEverySecond()
|
|
{
|
|
long cf_frequency = 0;
|
|
|
|
if (CSE_PULSES_NOT_INITIALIZED == cf_pulses_last_time) {
|
|
cf_pulses_last_time = cf_pulses; // Init after restart
|
|
} else {
|
|
if (cf_pulses < cf_pulses_last_time) { // Rolled over after 65535 pulses
|
|
cf_frequency = (65536 - cf_pulses_last_time) + cf_pulses;
|
|
} else {
|
|
cf_frequency = cf_pulses - cf_pulses_last_time;
|
|
}
|
|
if (cf_frequency && energy_power) {
|
|
cf_pulses_last_time = cf_pulses;
|
|
energy_kWhtoday_delta += (cf_frequency * Settings.energy_power_calibration) / 36;
|
|
EnergyUpdateToday();
|
|
}
|
|
}
|
|
}
|
|
|
|
void CseDrvInit()
|
|
{
|
|
if (!energy_flg) {
|
|
if ((SONOFF_S31 == Settings.module) || (SONOFF_POW_R2 == Settings.module)) { // Sonoff S31 or Sonoff Pow R2
|
|
baudrate = 4800;
|
|
serial_config = SERIAL_8E1;
|
|
energy_flg = XNRG_02;
|
|
}
|
|
}
|
|
}
|
|
|
|
boolean CseCommand()
|
|
{
|
|
boolean serviced = true;
|
|
|
|
if ((CMND_POWERCAL == energy_command_code) || (CMND_VOLTAGECAL == energy_command_code) || (CMND_CURRENTCAL == energy_command_code)) {
|
|
|
|
}
|
|
else if (CMND_POWERSET == energy_command_code) {
|
|
if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 3601) && power_cycle) {
|
|
Settings.energy_power_calibration = (XdrvMailbox.payload * power_cycle) / CSE_PREF;
|
|
}
|
|
}
|
|
else if (CMND_VOLTAGESET == energy_command_code) {
|
|
if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 501) && voltage_cycle) {
|
|
Settings.energy_voltage_calibration = (XdrvMailbox.payload * voltage_cycle) / CSE_UREF;
|
|
}
|
|
}
|
|
else if (CMND_CURRENTSET == energy_command_code) {
|
|
if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 16001) && current_cycle) {
|
|
Settings.energy_current_calibration = (XdrvMailbox.payload * current_cycle) / 1000;
|
|
}
|
|
}
|
|
else serviced = false; // Unknown command
|
|
|
|
return serviced;
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
int Xnrg02(byte function)
|
|
{
|
|
int result = 0;
|
|
|
|
if (FUNC_PRE_INIT == function) {
|
|
CseDrvInit();
|
|
}
|
|
else if (XNRG_02 == energy_flg) {
|
|
switch (function) {
|
|
case FUNC_EVERY_SECOND:
|
|
CseEverySecond();
|
|
break;
|
|
case FUNC_COMMAND:
|
|
result = CseCommand();
|
|
break;
|
|
case FUNC_SERIAL:
|
|
result = CseSerialInput();
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_CSE7766
|
|
#endif // USE_ENERGY_SENSOR
|