Tasmota/sonoff/xdrv_07_domoticz.ino

586 lines
20 KiB
C++

/*
xdrv_07_domoticz.ino - domoticz support for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_DOMOTICZ
#define XDRV_07 7
#define D_PRFX_DOMOTICZ "Domoticz"
#define D_CMND_IDX "Idx"
#define D_CMND_KEYIDX "KeyIdx"
#define D_CMND_SWITCHIDX "SwitchIdx"
#define D_CMND_SENSORIDX "SensorIdx"
#define D_CMND_UPDATETIMER "UpdateTimer"
const char kDomoticzCommands[] PROGMEM = D_PRFX_DOMOTICZ "|" // Prefix
D_CMND_IDX "|" D_CMND_KEYIDX "|" D_CMND_SWITCHIDX "|" D_CMND_SENSORIDX "|" D_CMND_UPDATETIMER ;
void (* const DomoticzCommand[])(void) PROGMEM = {
&CmndDomoticzIdx, &CmndDomoticzKeyIdx, &CmndDomoticzSwitchIdx, &CmndDomoticzSensorIdx, &CmndDomoticzUpdateTimer };
const char DOMOTICZ_MESSAGE[] PROGMEM = "{\"idx\":%d,\"nvalue\":%d,\"svalue\":\"%s\",\"Battery\":%d,\"RSSI\":%d}";
//enum DomoticzSensors {DZ_TEMP, DZ_TEMP_HUM, DZ_TEMP_HUM_BARO, DZ_POWER_ENERGY, DZ_ILLUMINANCE, DZ_COUNT, DZ_VOLTAGE, DZ_CURRENT, DZ_AIRQUALITY, DZ_MAX_SENSORS};
#if MAX_DOMOTICZ_SNS_IDX < DZ_MAX_SENSORS
#error "Domoticz: Too many sensors or change settings.h layout"
#endif
const char kDomoticzSensors[] PROGMEM =
D_DOMOTICZ_TEMP "|" D_DOMOTICZ_TEMP_HUM "|" D_DOMOTICZ_TEMP_HUM_BARO "|" D_DOMOTICZ_POWER_ENERGY "|" D_DOMOTICZ_ILLUMINANCE "|" D_DOMOTICZ_COUNT "|" D_DOMOTICZ_VOLTAGE "|" D_DOMOTICZ_CURRENT "|" D_DOMOTICZ_AIRQUALITY ;
char domoticz_in_topic[] = DOMOTICZ_IN_TOPIC;
char domoticz_out_topic[] = DOMOTICZ_OUT_TOPIC;
int domoticz_update_timer = 0;
uint32_t domoticz_fan_debounce = 0; // iFan02 state debounce timer
bool domoticz_subscribe = false;
bool domoticz_update_flag = true;
int DomoticzBatteryQuality(void)
{
// Battery 0%: ESP 2.6V (minimum operating voltage is 2.5)
// Battery 100%: ESP 3.6V (maximum operating voltage is 3.6)
// Battery 101% to 200%: ESP over 3.6V (means over maximum operating voltage)
int quality = 100; // Voltage range from 2,6V > 0% to 3,6V > 100%
#ifdef USE_ADC_VCC
uint16_t voltage = ESP.getVcc();
if (voltage <= 2600) {
quality = 0;
} else if (voltage >= 4600) {
quality = 200;
} else {
quality = (voltage - 2600) / 10;
}
#endif
return quality;
}
int DomoticzRssiQuality(void)
{
// RSSI range: 0% to 10% (12 means disable RSSI in Domoticz)
return WifiGetRssiAsQuality(WiFi.RSSI()) / 10;
}
#ifdef USE_SONOFF_IFAN
void MqttPublishDomoticzFanState()
{
if (Settings.flag.mqtt_enabled && Settings.domoticz_relay_idx[1]) {
char svalue[8]; // Fanspeed value
int fan_speed = GetFanspeed();
snprintf_P(svalue, sizeof(svalue), PSTR("%d"), fan_speed * 10);
Response_P(DOMOTICZ_MESSAGE, (int)Settings.domoticz_relay_idx[1], (0 == fan_speed) ? 0 : 2, svalue, DomoticzBatteryQuality(), DomoticzRssiQuality());
MqttPublish(domoticz_in_topic);
domoticz_fan_debounce = millis();
}
}
void DomoticzUpdateFanState()
{
if (domoticz_update_flag) {
MqttPublishDomoticzFanState();
}
domoticz_update_flag = true;
}
#endif // USE_SONOFF_IFAN
void MqttPublishDomoticzPowerState(uint8_t device)
{
if (Settings.flag.mqtt_enabled) {
if ((device < 1) || (device > devices_present)) { device = 1; }
if (Settings.domoticz_relay_idx[device -1]) {
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan() && (device > 1)) {
// Fan handled by MqttPublishDomoticzFanState
} else {
#endif // USE_SONOFF_IFAN
char svalue[8]; // Dimmer value
snprintf_P(svalue, sizeof(svalue), PSTR("%d"), Settings.light_dimmer);
Response_P(DOMOTICZ_MESSAGE, (int)Settings.domoticz_relay_idx[device -1], (power & (1 << (device -1))) ? 1 : 0, (light_type) ? svalue : "", DomoticzBatteryQuality(), DomoticzRssiQuality());
MqttPublish(domoticz_in_topic);
#ifdef USE_SONOFF_IFAN
}
#endif // USE_SONOFF_IFAN
}
}
}
void DomoticzUpdatePowerState(uint8_t device)
{
if (domoticz_update_flag) {
MqttPublishDomoticzPowerState(device);
}
domoticz_update_flag = true;
}
void DomoticzMqttUpdate(void)
{
if (domoticz_subscribe && (Settings.domoticz_update_timer || domoticz_update_timer)) {
domoticz_update_timer--;
if (domoticz_update_timer <= 0) {
domoticz_update_timer = Settings.domoticz_update_timer;
for (uint32_t i = 1; i <= devices_present; i++) {
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan() && (i > 1)) {
MqttPublishDomoticzFanState();
break;
} else {
#endif // USE_SONOFF_IFAN
MqttPublishDomoticzPowerState(i);
#ifdef USE_SONOFF_IFAN
}
#endif // USE_SONOFF_IFAN
}
}
}
}
void DomoticzMqttSubscribe(void)
{
uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present;
for (uint32_t i = 0; i < maxdev; i++) {
if (Settings.domoticz_relay_idx[i]) {
domoticz_subscribe = true;
}
}
if (domoticz_subscribe) {
char stopic[TOPSZ];
snprintf_P(stopic, sizeof(stopic), PSTR("%s/#"), domoticz_out_topic); // domoticz topic
MqttSubscribe(stopic);
}
}
/*
* ArduinoJSON Domoticz Switch entry used to calculate jsonBuf: JSON_OBJECT_SIZE(11) + 129 = 313
{
"Battery" : 255,
"RSSI" : 12,
"dtype" : "Light/Switch",
"id" : "000140E7",
"idx" : 159,
"name" : "Sonoff1",
"nvalue" : 1,
"stype" : "Switch",
"svalue1" : "0",
"switchType" : "Dimmer",
"unit" : 1
}
* Fail on this one
{
"LastUpdate" : "2018-10-02 20:39:45",
"Name" : "Sfeerverlichting",
"Status" : "Off",
"Timers" : "true",
"Type" : "Group",
"idx" : "2"
}
*/
bool DomoticzMqttData(void)
{
char stemp1[10];
unsigned long idx = 0;
int16_t nvalue = -1;
bool found = false;
domoticz_update_flag = true;
if (!strncmp(XdrvMailbox.topic, domoticz_out_topic, strlen(domoticz_out_topic))) {
if (XdrvMailbox.data_len < 20) {
return true; // No valid data
}
StaticJsonBuffer<400> jsonBuf;
JsonObject& domoticz = jsonBuf.parseObject(XdrvMailbox.data);
if (!domoticz.success()) {
return true; // To much or invalid data
}
// if (strcmp_P(domoticz["dtype"],PSTR("Light/Switch"))) {
// return true;
// }
idx = domoticz["idx"];
if (domoticz.containsKey("nvalue")) {
nvalue = domoticz["nvalue"];
}
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_DOMOTICZ "idx %d, nvalue %d"), idx, nvalue);
if ((idx > 0) && (nvalue >= 0) && (nvalue <= 15)) {
uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present;
for (uint32_t i = 0; i < maxdev; i++) {
if (idx == Settings.domoticz_relay_idx[i]) {
bool iscolordimmer = strcmp_P(domoticz["dtype"],PSTR("Color Switch")) == 0;
snprintf_P(stemp1, sizeof(stemp1), PSTR("%d"), i +1);
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan() && (1 == i)) { // Idx 2 is fanspeed
uint8_t svalue = 0;
if (domoticz.containsKey("svalue1")) {
svalue = domoticz["svalue1"];
} else {
return true; // Invalid data
}
svalue = (nvalue == 2) ? svalue / 10 : 0;
if (GetFanspeed() == svalue) {
return true; // Stop loop as already set
}
if (TimePassedSince(domoticz_fan_debounce) < 1000) {
return true; // Stop loop if device in limbo
}
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_FANSPEED));
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), svalue);
found = true;
} else
#endif // USE_SONOFF_IFAN
if (iscolordimmer && 10 == nvalue) { // Color_SetColor
JsonObject& color = domoticz["Color"];
uint16_t level = nvalue = domoticz["svalue1"];
uint16_t r = color["r"]; r = r * level / 100;
uint16_t g = color["g"]; g = g * level / 100;
uint16_t b = color["b"]; b = b * level / 100;
uint16_t cw = color["cw"]; cw = cw * level / 100;
uint16_t ww = color["ww"]; ww = ww * level / 100;
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_COLOR));
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%02x%02x%02x%02x%02x"), r, g, b, cw, ww);
found = true;
}
else if ((!iscolordimmer && 2 == nvalue) || // gswitch_sSetLevel
(iscolordimmer && 15 == nvalue)) { // Color_SetBrightnessLevel
if (domoticz.containsKey("svalue1")) {
nvalue = domoticz["svalue1"];
} else {
return true; // Invalid data
}
if (light_type && (Settings.light_dimmer == nvalue) && ((power >> i) &1)) {
return true; // State already set
}
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_DIMMER));
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue);
found = true;
}
else if (1 == nvalue || 0 == nvalue) {
if (((power >> i) &1) == (power_t)nvalue) {
return true; // Stop loop
}
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_POWER "%s"), (devices_present > 1) ? stemp1 : "");
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue);
found = true;
}
break;
}
}
}
if (!found) { return true; } // No command received
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_DOMOTICZ D_RECEIVED_TOPIC " %s, " D_DATA " %s"), XdrvMailbox.topic, XdrvMailbox.data);
domoticz_update_flag = false;
}
return false; // Process unchanged or new data
}
/*********************************************************************************************/
bool DomoticzSendKey(uint8_t key, uint8_t device, uint8_t state, uint8_t svalflg)
{
bool result = false;
if (device <= MAX_DOMOTICZ_IDX) {
if ((Settings.domoticz_key_idx[device -1] || Settings.domoticz_switch_idx[device -1]) && (svalflg)) {
Response_P(PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"),
(key) ? Settings.domoticz_switch_idx[device -1] : Settings.domoticz_key_idx[device -1], (state) ? (2 == state) ? "Toggle" : "On" : "Off");
MqttPublish(domoticz_in_topic);
result = true;
}
}
return result;
}
/*********************************************************************************************\
* Sensors
*
* Source : https://www.domoticz.com/wiki/Domoticz_API/JSON_URL%27s
* https://www.domoticz.com/wiki/MQTT
*
* Percentage, Barometric, Air Quality:
* {\"idx\":%d,\"nvalue\":%s}, Idx, Value
*
* Humidity:
* {\"idx\":%d,\"nvalue\":%s,\"svalue\":\"%s\"}, Idx, Humidity, HumidityStatus
*
* All other:
* {\"idx\":%d,\"nvalue\":0,\"svalue\":\"%s\"}, Idx, Value(s)
*
\*********************************************************************************************/
uint8_t DomoticzHumidityState(char *hum)
{
uint8_t h = atoi(hum);
return (!h) ? 0 : (h < 40) ? 2 : (h > 70) ? 3 : 1;
}
void DomoticzSensor(uint8_t idx, char *data)
{
if (Settings.domoticz_sensor_idx[idx]) {
char dmess[100];
memcpy(dmess, mqtt_data, sizeof(dmess));
if (DZ_AIRQUALITY == idx) {
Response_P(PSTR("{\"idx\":%d,\"nvalue\":%s,\"Battery\":%d,\"RSSI\":%d}"),
Settings.domoticz_sensor_idx[idx], data, DomoticzBatteryQuality(), DomoticzRssiQuality());
} else {
Response_P(DOMOTICZ_MESSAGE,
Settings.domoticz_sensor_idx[idx], 0, data, DomoticzBatteryQuality(), DomoticzRssiQuality());
}
MqttPublish(domoticz_in_topic);
memcpy(mqtt_data, dmess, sizeof(dmess));
}
}
void DomoticzSensor(uint8_t idx, uint32_t value)
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%d"), value);
DomoticzSensor(idx, data);
}
void DomoticzTempHumSensor(char *temp, char *hum)
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%s;%s;%d"), temp, hum, DomoticzHumidityState(hum));
DomoticzSensor(DZ_TEMP_HUM, data);
}
void DomoticzTempHumPressureSensor(char *temp, char *hum, char *baro)
{
char data[32];
snprintf_P(data, sizeof(data), PSTR("%s;%s;%d;%s;5"), temp, hum, DomoticzHumidityState(hum), baro);
DomoticzSensor(DZ_TEMP_HUM_BARO, data);
}
void DomoticzSensorPowerEnergy(int power, char *energy)
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%d;%s"), power, energy);
DomoticzSensor(DZ_POWER_ENERGY, data);
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
void CmndDomoticzIdx(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_relay_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
restart_flag = 2;
}
ResponseCmndIdxNumber(Settings.domoticz_relay_idx[XdrvMailbox.index -1]);
}
}
void CmndDomoticzKeyIdx(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_key_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
ResponseCmndIdxNumber(Settings.domoticz_key_idx[XdrvMailbox.index -1]);
}
}
void CmndDomoticzSwitchIdx(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_switch_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
ResponseCmndIdxNumber(Settings.domoticz_switch_idx[XdrvMailbox.index -1]);
}
}
void CmndDomoticzSensorIdx(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= DZ_MAX_SENSORS)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_sensor_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
ResponseCmndIdxNumber(Settings.domoticz_sensor_idx[XdrvMailbox.index -1]);
}
}
void CmndDomoticzUpdateTimer(void)
{
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
Settings.domoticz_update_timer = XdrvMailbox.payload;
}
ResponseCmndNumber(Settings.domoticz_update_timer);
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_WEBSERVER
#define WEB_HANDLE_DOMOTICZ "dm"
const char S_CONFIGURE_DOMOTICZ[] PROGMEM = D_CONFIGURE_DOMOTICZ;
const char HTTP_BTN_MENU_DOMOTICZ[] PROGMEM =
"<p><form action='" WEB_HANDLE_DOMOTICZ "' method='get'><button>" D_CONFIGURE_DOMOTICZ "</button></form></p>";
const char HTTP_FORM_DOMOTICZ[] PROGMEM =
"<fieldset><legend><b>&nbsp;" D_DOMOTICZ_PARAMETERS "&nbsp;</b></legend>"
"<form method='post' action='" WEB_HANDLE_DOMOTICZ "'>"
"<table>";
const char HTTP_FORM_DOMOTICZ_RELAY[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_IDX " %d</b></td><td style='width:70px'><input id='r%d' placeholder='0' value='%d'></td></tr>"
"<tr><td style='width:260px'><b>" D_DOMOTICZ_KEY_IDX " %d</b></td><td style='width:70px'><input id='k%d' placeholder='0' value='%d'></td></tr>";
const char HTTP_FORM_DOMOTICZ_SWITCH[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_SWITCH_IDX " %d</b></td><td style='width:70px'><input id='s%d' placeholder='0' value='%d'></td></tr>";
const char HTTP_FORM_DOMOTICZ_SENSOR[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_SENSOR_IDX " %d</b> %s</td><td style='width:70px'><input id='l%d' placeholder='0' value='%d'></td></tr>";
const char HTTP_FORM_DOMOTICZ_TIMER[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_UPDATE_TIMER "</b> (" STR(DOMOTICZ_UPDATE_TIMER) ")</td><td style='width:70px'><input id='ut' placeholder='" STR(DOMOTICZ_UPDATE_TIMER) "' value='%d'></td></tr>";
void HandleDomoticzConfiguration(void)
{
if (!HttpCheckPriviledgedAccess()) { return; }
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_DOMOTICZ);
if (WebServer->hasArg("save")) {
DomoticzSaveSettings();
WebRestart(1);
return;
}
char stemp[40];
WSContentStart_P(S_CONFIGURE_DOMOTICZ);
WSContentSendStyle();
WSContentSend_P(HTTP_FORM_DOMOTICZ);
for (uint32_t i = 0; i < MAX_DOMOTICZ_IDX; i++) {
if (i < devices_present) {
WSContentSend_P(HTTP_FORM_DOMOTICZ_RELAY,
i +1, i, Settings.domoticz_relay_idx[i],
i +1, i, Settings.domoticz_key_idx[i]);
}
if (pin[GPIO_SWT1 +i] < 99) {
WSContentSend_P(HTTP_FORM_DOMOTICZ_SWITCH,
i +1, i, Settings.domoticz_switch_idx[i]);
}
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan() && (1 == i)) { break; }
#endif // USE_SONOFF_IFAN
}
for (uint32_t i = 0; i < DZ_MAX_SENSORS; i++) {
WSContentSend_P(HTTP_FORM_DOMOTICZ_SENSOR,
i +1, GetTextIndexed(stemp, sizeof(stemp), i, kDomoticzSensors), i, Settings.domoticz_sensor_idx[i]);
}
WSContentSend_P(HTTP_FORM_DOMOTICZ_TIMER, Settings.domoticz_update_timer);
WSContentSend_P(PSTR("</table>"));
WSContentSend_P(HTTP_FORM_END);
WSContentSpaceButton(BUTTON_CONFIGURATION);
WSContentStop();
}
void DomoticzSaveSettings(void)
{
char stemp[20];
char ssensor_indices[6 * MAX_DOMOTICZ_SNS_IDX];
char tmp[100];
for (uint32_t i = 0; i < MAX_DOMOTICZ_IDX; i++) {
snprintf_P(stemp, sizeof(stemp), PSTR("r%d"), i);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_relay_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
snprintf_P(stemp, sizeof(stemp), PSTR("k%d"), i);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_key_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
snprintf_P(stemp, sizeof(stemp), PSTR("s%d"), i);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_switch_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
}
ssensor_indices[0] = '\0';
for (uint32_t i = 0; i < DZ_MAX_SENSORS; i++) {
snprintf_P(stemp, sizeof(stemp), PSTR("l%d"), i);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_sensor_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
snprintf_P(ssensor_indices, sizeof(ssensor_indices), PSTR("%s%s%d"), ssensor_indices, (strlen(ssensor_indices)) ? "," : "", Settings.domoticz_sensor_idx[i]);
}
WebGetArg("ut", tmp, sizeof(tmp));
Settings.domoticz_update_timer = (!strlen(tmp)) ? DOMOTICZ_UPDATE_TIMER : atoi(tmp);
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_DOMOTICZ D_CMND_IDX " %d,%d,%d,%d, " D_CMND_KEYIDX " %d,%d,%d,%d, " D_CMND_SWITCHIDX " %d,%d,%d,%d, " D_CMND_SENSORIDX " %s, " D_CMND_UPDATETIMER " %d"),
Settings.domoticz_relay_idx[0], Settings.domoticz_relay_idx[1], Settings.domoticz_relay_idx[2], Settings.domoticz_relay_idx[3],
Settings.domoticz_key_idx[0], Settings.domoticz_key_idx[1], Settings.domoticz_key_idx[2], Settings.domoticz_key_idx[3],
Settings.domoticz_switch_idx[0], Settings.domoticz_switch_idx[1], Settings.domoticz_switch_idx[2], Settings.domoticz_switch_idx[3],
ssensor_indices, Settings.domoticz_update_timer);
}
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv07(uint8_t function)
{
bool result = false;
if (Settings.flag.mqtt_enabled) {
switch (function) {
case FUNC_EVERY_SECOND:
DomoticzMqttUpdate();
break;
case FUNC_MQTT_DATA:
result = DomoticzMqttData();
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_ADD_BUTTON:
WSContentSend_P(HTTP_BTN_MENU_DOMOTICZ);
break;
case FUNC_WEB_ADD_HANDLER:
WebServer->on("/" WEB_HANDLE_DOMOTICZ, HandleDomoticzConfiguration);
break;
#endif // USE_WEBSERVER
case FUNC_MQTT_SUBSCRIBE:
DomoticzMqttSubscribe();
break;
case FUNC_MQTT_INIT:
domoticz_update_timer = 2;
break;
case FUNC_SHOW_SENSOR:
// DomoticzSendSensor();
break;
case FUNC_COMMAND:
result = DecodeCommand(kDomoticzCommands, DomoticzCommand);
break;
}
}
return result;
}
#endif // USE_DOMOTICZ