mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_xsns_sensor/xsns_100_ina3221.ino

597 lines
23 KiB
C++
Raw Blame History

/*
xsns_100_ina3221.ino - INA3221 3-channels Current Sensor support for Tasmota
Copyright (C) 2021 Barbudor and Theo Arends + fb-pilot 2024-3-7
Based on Barbudor's CircuitPython_INA3221
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_INA3221
/*********************************************************************************************\
* INA3221 - 3 channels High-side DC voltage and current measurment
* https://www.ti.com/product/INA3221
*
* Up to 4 devices can be connected (12 channels)
* I2C Address: 0x40, 0x41, 0x43 or 0x43
*
* IMPORTANT INFORMATION
* By default the driver is enabled to support up to 4 INA3221 from hte above addresse
* If you want to enable less addresses in order to use other I2C chip on those addresses you
* can define in your user_config_override.h the following:
* #define INA3221_MAX_COUNT the max number of INA3221 to support
* #define INA3221_ADDRESS1 the I2C address of the 1st INA3221
* For example to support only 2 INA3221 at addresses 0x41 and 0x42 you can use:
* #define INA3221_MAX_COUNT 2
* #define INA3221_ADDRESS1 0x41
* That would leave 0x40 and 0x43 for other devices
* By defining INA3221_CALC_CHARGE_AH INA3221_CALC_ENERGY_WH the driver adds a estimation of
* energies in Ah and Wh to the output, To reset the energie calculation disable tge
* according INA3221 chanel by setting the shunt to 0.0 and enable it again
* For example :
* sensor100 1,0.0,0.1,0.2 and sensor100 1,0.1,0.1,0.2 will reset channel 1
* Nevertheless, hte driver tries to identifiy if the chip as an address is a IN3221
\*********************************************************************************************/
// setup of INA3221 config
#ifndef INA3221_CONFIG_INIT
#define INA3221_CONFIG_INIT INA3221_AVERAGING_16_SAMPLES |\
INA3221_VBUS_CONV_TIME_1MS |\
INA3221_SHUNT_CONV_TIME_1MS
// that results in a complete conversions sequence in 6,6 ms and a slope time of 105,6 ms
#endif
// end of setup of INA3221 config
#define XSNS_100 100
#define XI2C_72 72 // See I2CDEVICES.md
#ifndef INA3221_MAX_COUNT
#define INA3221_MAX_COUNT 4
#endif
#if (INA3221_MAX_COUNT > 4)
#error "**** INA3221_MAX_COUNT can't be greater than 4 ****"
#endif
#ifndef INA3221_ADDRESS1
#define INA3221_ADDRESS1 (0x40) // 1000000 (A0=GND)
#define INA3221_ADDRESS2 (0x41) // 1000000 (A0=VS)
#define INA3221_ADDRESS3 (0x42) // 1000010 (A0=SDA)
#define INA3221_ADDRESS4 (0x43) // 1000011 (A0=SCL)
#endif
#define INA3221_ADDRESS(index) (INA3221_ADDRESS1+(index))
#if ((INA3221_ADDRESS1 + INA3221_MAX_COUNT) > 0x44)
#error "**** INA3221 bad combination for ADDRESS1 and MAX_COUNT ****"
#endif
#define INA3221_NB_CHAN (3)
// Config register - ch : 0..2
#define INA3221_REG_CONFIG (0x00)
#define INA3221_RESET (0x8000)
#define INA3221_ENABLE_MASK (0x7000)
#define INA3221_ENABLE_CH(ch) (0x4000>>(ch)) // default: set
#define INA3221_AVERAGING_MASK (0x0E00)
#define INA3221_AVERAGING_NONE (0x0000)
#define INA3221_AVERAGING_4_SAMPLES (0x0200)
#define INA3221_AVERAGING_16_SAMPLES (0x0400)
#define INA3221_AVERAGING_64_SAMPLES (0x0600)
#define INA3221_AVERAGING_128_SAMPLES (0x0800)
#define INA3221_AVERAGING_256_SAMPLES (0x0A00)
#define INA3221_AVERAGING_512_SAMPLES (0x0C00) // 1 sample
#define INA3221_AVERAGING_1024_SAMPLES (0x0E00)
#define INA3221_VBUS_CONV_TIME_MASK (0x01C0)
#define INA3221_VBUS_CONV_TIME_140US (0x0000)
#define INA3221_VBUS_CONV_TIME_204US (0x0040)
#define INA3221_VBUS_CONV_TIME_332US (0x0080)
#define INA3221_VBUS_CONV_TIME_588US (0x00C0)
#define INA3221_VBUS_CONV_TIME_1MS (0x0100) // 1.1ms
#define INA3221_VBUS_CONV_TIME_2MS (0x0140) // 2.116ms
#define INA3221_VBUS_CONV_TIME_4MS (0x0180) // 4.156ms
#define INA3221_VBUS_CONV_TIME_8MS (0x01C0) // 8.244ms
#define INA3221_SHUNT_CONV_TIME_MASK (0x0038)
#define INA3221_SHUNT_CONV_TIME_140US (0x0000)
#define INA3221_SHUNT_CONV_TIME_204US (0x0008)
#define INA3221_SHUNT_CONV_TIME_332US (0x0010)
#define INA3221_SHUNT_CONV_TIME_588US (0x0018)
#define INA3221_SHUNT_CONV_TIME_1MS (0x0020) // 1.1ms
#define INA3221_SHUNT_CONV_TIME_2MS (0x0028) // 2.116ms
#define INA3221_SHUNT_CONV_TIME_4MS (0x0030) // 4.156ms
#define INA3221_SHUNT_CONV_TIME_8MS (0x0038) // 8.244ms
#define INA3221_MODE_MASK (0x0007)
#define INA3221_MODE_POWER_DOWN (0x0000)
#define INA3221_MODE_SHUNT_VOLTAGE_TRIGGERED (0x0001)
#define INA3221_MODE_BUS_VOLTAGE_TRIGGERED (0x0002)
#define INA3221_MODE_SHUNT_AND_BUS_TRIGGERED (0x0003)
#define INA3221_MODE_POWER_DOWN2 (0x0004)
#define INA3221_MODE_SHUNT_VOLTAGE_CONTINUOUS (0x0005)
#define INA3221_MODE_BUS_VOLTAGE_CONTINUOUS (0x0006)
#define INA3221_MODE_SHUNT_AND_BUS_CONTINOUS (0x0007) // default
// Other registers - ch = 0..2
#define INA3221_REG_SHUNT_VOLTAGE_CH(ch) (0x01+((ch)<<1))
#define INA3221_REG_BUS_VOLTAGE_CH(ch) (0x02+((ch)<<1))
#define INA3221_REG_CRITICAL_ALERT_LIMIT_CH(ch) (0x07+((ch)<<1))
#define INA3221_REG_WARNING_ALERT_LIMIT_CH(ch) (0x08+((ch)<<1))
#define INA3221_REG_SHUNT_VOLTAGE_SUM (0x0D)
#define INA3221_REG_SHUNT_VOLTAGE_SUM_LIMIT (0x0E)
// Mask/enable register - ch = 1..3
#define INA3221_REG_MASK_ENABLE (0x0F)
#define INA3221_SUM_CONTROL_CH(ch) (0x4000>>((ch)-1))
#define INA3221_WARNING_LATCH_ENABLE (0x0800)
#define INA3221_CRITICAL_LATCH_ENABLE (0x0400)
#define INA3221_CRITICAL_FLAG_CH(ch) (0x0200>>((ch)-1))
#define INA3221_SUM_ALERT_FLAG (0x0040)
#define INA3221_WARNING_FLAG_CH(ch) (0x0020>>((ch)-1))
#define INA3221_POWER_ALERT_FLAG (0x0004)
#define INA3221_TIMING_ALERT_FLAG (0x0002)
#define INA3221_CONV_READY_FLAG (0x0001)
// Other registers
#define INA3221_REG_POWER_VALID_UPPER_LIMIT (0x10)
#define INA3221_REG_POWER_VALID_LOWER_LIMIT (0x11)
#define INA3221_REG_MANUFACTURER_ID (0xFE)
#define INA3221_REG_DIE_ID (0xFF)
// Constants for manufacturer and device ID
#define INA3221_MANUFACTURER_ID (0x5449) // "TI"
#define INA3221_DIE_ID (0x3220)
// General constants
#define INA3221C_BUS_ADC_LSB (0.008) // VBus ADC LSB is 8mV
#define INA3221C_SHUNT_ADC_LSB (0.00004) // VShunt ADC LSB is 40µV
#define INA3221_DEFAULT_SHUNT_RESISTOR (0.1)
#define INA3221_ENERGY_FACTOR (1.0/(3600.0*1000.0)) // reading values all xx ms
#ifdef DEBUG_TASMOTA_SENSOR
// temporary strings for floating point in debug messages
char _ina3221_dbg1[FLOATSZ];
char _ina3221_dbg2[FLOATSZ];
#endif
const char INA3221_SENSORCMND_START[] PROGMEM = "{\"" D_CMND_SENSOR "%d\":{\"idx\":%d,\"addr\":\"0x%02X\",\"rshunt\":[";
const char INA3221_SENSORCMND_END[] PROGMEM = "]}}";
#if defined(INA3221_CALC_CHARGE_AH) || defined(INA3221_CALC_ENERGY_WH)
uint32_t INA3221_last_millis;
uint32_t INA3221_delta_ms;
#endif
struct INA3221_Channel_Data {
float voltage;
float current;
float shunt;
#ifdef INA3221_CALC_CHARGE_AH
float charge_ah;
#endif
#ifdef INA3221_CALC_ENERGY_WH
float energy_wh;
#endif
};
struct INA3221_Data {
struct INA3221_Channel_Data chan[INA3221_NB_CHAN];
uint8_t enabled_chan;
uint8_t i2caddr;
};
struct INA3221_Data *Ina3221Data = nullptr;
uint8_t Ina3221count = 0;
static uint8_t _ina3221_current_device = 0;
#define D_INA3221 "INA3221"
const char INA3221_TYPE[] = D_INA3221;
bool Ina3221SetConfig(uint8_t addr)
{
// check if device is a INA3221
uint16_t manufacturer_id = 0, die_id = 0;
if (!I2cValidRead16(&manufacturer_id, addr, INA3221_REG_MANUFACTURER_ID)
|| (manufacturer_id != INA3221_MANUFACTURER_ID)
|| !I2cValidRead16(&die_id, addr, INA3221_REG_DIE_ID)
|| (die_id != INA3221_DIE_ID)) {
AddLog(LOG_LEVEL_DEBUG, PSTR(D_INA3221 ":Skipping device at addr:0x%02X not an " D_INA3221), addr);
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR(D_INA3221 ":SetConfig: manId=0x%04X, dieId=0x%04X"), manufacturer_id, die_id);
return false;
}
// write default configuration
uint16_t config = INA3221_ENABLE_MASK |
INA3221_CONFIG_INIT |
INA3221_MODE_SHUNT_AND_BUS_CONTINOUS;
DEBUG_SENSOR_LOG(PSTR(D_INA3221 ":SetConfig: addr:0x%02X, config=0x%04X"), addr, config);
// Set Config register
if (!I2cWrite16(addr, INA3221_REG_CONFIG, config))
return false;
return true;
}
#ifdef USE_DEEPSLEEP
bool Ina3221PowerDown(uint8_t device)
{
uint8_t addr = Ina3221Data[device].i2caddr;
// write default configuration
uint16_t config = INA3221_MODE_POWER_DOWN;
DEBUG_SENSOR_LOG(PSTR(D_INA3221 ":PowerDown: addr:0x%02X, config=0x%04X"), addr, config);
// Set Config register
if (!I2cWrite16(addr, INA3221_REG_CONFIG, config))
return false;
return true;
}
#endif
void Ina3221SetShunt(uint8_t device, uint8_t channel, float shunt)
{
Ina3221Data[device].chan[channel].shunt = shunt;
if (shunt > 0.0){
Ina3221Data[device].enabled_chan |= (1<<channel);
}else{
Ina3221Data[device].enabled_chan &= ~(1<<channel);
#ifdef INA3221_CALC_CHARGE_AH
Ina3221Data[device].chan[channel].charge_ah =0.0;
#endif
#ifdef INA3221_CALC_ENERGY_WH
Ina3221Data[device].chan[channel].energy_wh =0.0;
#endif
}
}
bool Ina3221Read(uint8_t device, uint8_t channel)
{
uint8_t addr = Ina3221Data[device].i2caddr;
int16_t bus_voltage, shunt_voltage;
struct INA3221_Channel_Data *pChannel = &Ina3221Data[device].chan[channel];
bus_voltage = I2cReadS16(addr, INA3221_REG_BUS_VOLTAGE_CH(channel));
DEBUG_SENSOR_LOG(D_INA3221 ":GetBusVoltage: RegVBus[%d:%d](0x%02X) = 0x%04X = %d", device, channel, INA3221_REG_BUS_VOLTAGE_CH(channel), bus_voltage, bus_voltage);
// Convert to VBus voltage in V
pChannel->voltage = INA3221C_BUS_ADC_LSB * (float)(bus_voltage >> 3);
if (pChannel->shunt > 0.0) {
shunt_voltage = I2cReadS16(addr, INA3221_REG_SHUNT_VOLTAGE_CH(channel));
DEBUG_SENSOR_LOG(D_INA3221 ":GetShuntVoltage: RegSh[%d:%d](0x%02X) = 0x%04X = %d", device, channel, INA3221_REG_SHUNT_VOLTAGE_CH(channel), shunt_voltage, shunt_voltage);
// convert to shunt voltage in V
pChannel->current = INA3221C_SHUNT_ADC_LSB * (float)(shunt_voltage >> 3) / pChannel->shunt;
#ifdef INA3221_CALC_CHARGE_AH
pChannel->charge_ah += (pChannel->current * (float)INA3221_delta_ms * INA3221_ENERGY_FACTOR);
#endif
#ifdef INA3221_CALC_ENERGY_WH
pChannel->energy_wh += (pChannel->current * pChannel->voltage * (float)INA3221_delta_ms * INA3221_ENERGY_FACTOR);
#endif
} else {
pChannel->current = INFINITY;
#ifdef INA3221_CALC_CHARGE_AH
pChannel->charge_ah = INFINITY;
#endif
#ifdef INA3221_CALC_ENERGY_WH
pChannel->energy_wh = INFINITY;
#endif
}
#ifdef DEBUG_TASMOTA_SENSOR
dtostrfd(pChannel->voltage,5,_ina3221_dbg1);
dtostrfd(pChannel->current,5,_ina3221_dbg2);
DEBUG_SENSOR_LOG(D_INA3221 ":Read[%d:%d]: V=%sV, I=%sA", device, channel, _ina3221_dbg1, _ina3221_dbg2);
#endif
return true;
}
/*********************************************************************************************\
* Command Sensor
\*********************************************************************************************/
bool Ina3221CmndSensor(void)
{
int argc = ArgC();
if(argc != 1 && argc != 4) {
AddLog(LOG_LEVEL_DEBUG, PSTR(D_INA3221 ": Not enough arguments (1 or 4)"));
return false;
}
char argument[XdrvMailbox.data_len+FLOATSZ];
uint32_t device = atoi(ArgV(argument,1)) -1;
if (device >= INA3221_MAX_COUNT || !Ina3221Data[device].i2caddr) {
DEBUG_SENSOR_LOG(D_INA3221 ":Sensor: invalid device %d", device+1);
return false;
}
if (argc > 1) {
for (int channel = 0 ; channel < INA3221_NB_CHAN ; channel++) {
float shunt = CharToFloat(ArgV(argument,2+channel));
Ina3221SetShunt(device, channel, shunt);
}
}
Response_P(INA3221_SENSORCMND_START, XSNS_100, device +1, Ina3221Data[device].i2caddr);
for (int channel = 0 ; channel < INA3221_NB_CHAN ; channel++ ) {
dtostrfd(Ina3221Data[device].chan[channel].shunt,5,argument);
ResponseAppend_P(PSTR("%s%c"), argument, ((channel < (INA3221_NB_CHAN-1))?',':'\0'));
}
ResponseAppend_P(INA3221_SENSORCMND_END);
return true;
}
/********************************************************************************************/
void Ina3221Detect(void)
{
_ina3221_current_device = 0;
Ina3221count = 0;
for (uint32_t i = 0; i < INA3221_MAX_COUNT; i++) {
uint16_t addr = INA3221_ADDRESS(i);
if (!I2cSetDevice(addr)) { continue; }
if (!Ina3221Data) {
Ina3221Data = (struct INA3221_Data*)calloc(INA3221_MAX_COUNT,sizeof(struct INA3221_Data));
if (!Ina3221Data) {
AddLog(LOG_LEVEL_ERROR,PSTR(D_INA3221 ": Mem allocation error"));
return;
}
}
if (Ina3221SetConfig(addr)) {
I2cSetActiveFound(addr, INA3221_TYPE);
Ina3221Data[Ina3221count].i2caddr = addr;
Ina3221Data[Ina3221count].enabled_chan = 0;
Ina3221Data[Ina3221count].chan[0].shunt = \
Ina3221Data[Ina3221count].chan[1].shunt = \
Ina3221Data[Ina3221count].chan[2].shunt = 0.0;
Ina3221count++;
}
}
if (!Ina3221count && Ina3221Data) {
free(Ina3221Data);
Ina3221Data = nullptr;
}
#if defined(INA3221_CALC_CHARGE_AH) || defined(INA3221_CALC_ENERGY_WH)
INA3221_last_millis = millis();
#endif
}
void Ina3221Every250ms(void)
{
DEBUG_SENSOR_LOG(PSTR(D_INA3221 ": cur:%d, en:%d"), _ina3221_current_device, Ina3221Data[_ina3221_current_device].enabled_chan);
uint8_t enabled_chan = Ina3221Data[_ina3221_current_device].enabled_chan;
for (int chan = 0 ; enabled_chan ; chan++, enabled_chan>>=1) {
if (0x01 & enabled_chan)
Ina3221Read(_ina3221_current_device, chan);
}
if (++_ina3221_current_device >= INA3221_MAX_COUNT){
_ina3221_current_device = 0;
#if defined(INA3221_CALC_CHARGE_AH) || defined(INA3221_CALC_ENERGY_WH)
INA3221_delta_ms = millis()-INA3221_last_millis;
INA3221_last_millis = millis();
#endif
}
}
#ifdef USE_WEBSERVER
// {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
#define INA3221_AL "<td style='text-align:right'>"
const char HTTP_SNS_INA3221_HEADER[] PROGMEM =
// "{s}" D_INA3221 "&nbsp;&nbsp;&nbsp;&nbsp;</th><td>&nbsp;</td><td style='text-align:right'>" D_VOLTAGE " </td><td>&nbsp;</td><td style='text-align:right'>" D_CURRENT " </td><td>&nbsp;</td><td style='text-align:right'>" D_POWERUSAGE
"{s}" D_INA3221 "&nbsp;&nbsp;&nbsp;&nbsp;</th>" INA3221_AL D_VOLTAGE " </td><td>&nbsp;</td>" INA3221_AL D_CURRENT " </td><td>&nbsp;</td>" INA3221_AL D_POWERUSAGE
#ifdef INA3221_CALC_CHARGE_AH
"</td><td>&nbsp;</td>" INA3221_AL D_CHARGE
#endif
#ifdef INA3221_CALC_ENERGY_WH
"</td><td>&nbsp;</td>" INA3221_AL D_ENERGY
#endif
"{e}";
const char HTTP_SNS_INA3221_DATA[] PROGMEM =
// "{s}%s </th></th><td>&nbsp;</td><td style='text-align:right'>%s " D_UNIT_VOLT " </td><td>&nbsp;</td><td style='text-align:right'>%s " D_UNIT_AMPERE " </td><td>&nbsp;</td><td style='text-align:right'>%s " D_UNIT_WATT
"{s}%s </th></th>" INA3221_AL " %s " D_UNIT_VOLT " </td><td>&nbsp;</td>" INA3221_AL " %s " D_UNIT_AMPERE " </td><td>&nbsp;</td>" INA3221_AL " %s " D_UNIT_WATT
#ifdef INA3221_CALC_CHARGE_AH
"</td><td>&nbsp;</td>" INA3221_AL " %s " D_UNIT_CHARGE
#endif
#ifdef INA3221_CALC_ENERGY_WH
"</td><td>&nbsp;</td>" INA3221_AL " %s " D_UNIT_WATTHOUR
#endif
"{e}";
#endif // USE_WEBSERVER
void Ina3221Show(bool json)
{
char name[FLOATSZ];
char temp[FLOATSZ];
char voltage[3*FLOATSZ+3];
char current[3*FLOATSZ+3];
char power[3*FLOATSZ+3];
#ifdef INA3221_CALC_CHARGE_AH
char charge_ah[3*FLOATSZ+3];
#endif
#ifdef INA3221_CALC_ENERGY_WH
char energy_wh[3*FLOATSZ+3];
#endif
if (json) {
// data
for (int device=0 ; device < Ina3221count ; device++) {
uint8_t enabled_chan = Ina3221Data[device].enabled_chan;
if (!enabled_chan) continue;
if (Ina3221count > 1){
snprintf_P(name, sizeof(name), PSTR("%s%c%d"), INA3221_TYPE, IndexSeparator(), device +1);
}
else{
snprintf_P(name, sizeof(name), PSTR("%s"), INA3221_TYPE);
voltage[0] = current[0] = power[0] =
#ifdef INA3221_CALC_CHARGE_AH
charge_ah[0] =
#endif
#ifdef INA3221_CALC_ENERGY_WH
energy_wh[0] =
#endif
'\0';
}
for (int chan=0 ; enabled_chan ; chan++, enabled_chan>>=1) {
if (0x01 & enabled_chan) {
dtostrfd(Ina3221Data[device].chan[chan].voltage, Settings->flag2.voltage_resolution, temp);
strncat(voltage, temp, sizeof(voltage));
dtostrfd(Ina3221Data[device].chan[chan].current, Settings->flag2.current_resolution, temp);
strncat(current, temp, sizeof(current));
dtostrfd(Ina3221Data[device].chan[chan].voltage * Ina3221Data[device].chan[chan].current, Settings->flag2.wattage_resolution, temp);
strncat(power, temp, sizeof(power));
#ifdef INA3221_CALC_CHARGE_AH
dtostrfd(Ina3221Data[device].chan[chan].charge_ah, Settings->flag2.energy_resolution, temp);
strncat(charge_ah, temp, sizeof(charge_ah));
#endif
#ifdef INA3221_CALC_ENERGY_WH
dtostrfd(Ina3221Data[device].chan[chan].energy_wh, Settings->flag2.energy_resolution, temp);
strncat(energy_wh, temp, sizeof(energy_wh));
#endif
} //if enabled
else {
strncat(voltage, "null", sizeof(voltage));
strncat(current, "null", sizeof(current));
strncat(power, "null", sizeof(power));
#ifdef INA3221_CALC_CHARGE_AH
strncat(charge_ah, "null", sizeof(charge_ah));
#endif
#ifdef INA3221_CALC_ENERGY_WH
strncat(energy_wh, "null", sizeof(energy_wh));
#endif
}
if (0xFE & enabled_chan) {
strncat(voltage, ",", sizeof(voltage));
strncat(current, ",", sizeof(current));
strncat(power, ",", sizeof(power));
#ifdef INA3221_CALC_CHARGE_AH
strncat(charge_ah, ",", sizeof(charge_ah));
#endif
#ifdef INA3221_CALC_ENERGY_WH
strncat(energy_wh, ",", sizeof(energy_wh));
#endif
}
} // for channel
ResponseAppend_P(PSTR(",\"%s\":{\"Id\":\"0x%02x\",\"" D_JSON_VOLTAGE "\":[%s],\"" D_JSON_CURRENT "\":[%s],\"" D_JSON_POWERUSAGE "\":[%s]"
#ifdef INA3221_CALC_CHARGE_AH
",\"" D_JSON_CHARGE "\":[%s]"
#endif
#ifdef INA3221_CALC_ENERGY_WH
",\"" D_JSON_ENERGY "\":[%s]"
#endif
"}"),name, Ina3221Data[device].i2caddr, voltage, current, power
#ifdef INA3221_CALC_CHARGE_AH
, charge_ah
#endif
#ifdef INA3221_CALC_ENERGY_WH
, energy_wh
#endif
);
#ifdef USE_DOMOTICZ
if (0 == TasmotaGlobal.tele_period) {
DomoticzSensor(DZ_VOLTAGE, voltage);
DomoticzSensor(DZ_CURRENT, current);
}
#endif // USE_DOMOTICZ
} // for device
} // if json
#ifdef USE_WEBSERVER
else {
// header
WSContentSend_PD(HTTP_SNS_INA3221_HEADER);
// data
for (int device=0 ; device < Ina3221count ; device++) {
uint8_t enabled_chan = Ina3221Data[device].enabled_chan;
for (int chan=0 ; enabled_chan ; chan++, enabled_chan>>=1) {
if (0x01 & enabled_chan) {
if (Ina3221count > 1){
snprintf_P(name, sizeof(name), PSTR("%s%c%d:%d"), INA3221_TYPE, IndexSeparator(), device +1, chan);
}else{
snprintf_P(name, sizeof(name), PSTR("%s:%d"), INA3221_TYPE, chan);
dtostrfd(Ina3221Data[device].chan[chan].voltage, Settings->flag2.voltage_resolution, voltage);
dtostrfd(Ina3221Data[device].chan[chan].current, Settings->flag2.current_resolution, current);
dtostrfd(Ina3221Data[device].chan[chan].voltage * Ina3221Data[device].chan[chan].current, Settings->flag2.wattage_resolution, power);
#ifdef INA3221_CALC_CHARGE_AH
dtostrfd(Ina3221Data[device].chan[chan].charge_ah, Settings->flag2.energy_resolution, charge_ah);
#endif
#ifdef INA3221_CALC_ENERGY_WH
dtostrfd(Ina3221Data[device].chan[chan].energy_wh, Settings->flag2.energy_resolution, energy_wh);
#endif
WSContentSend_PD(HTTP_SNS_INA3221_DATA, name, voltage, current, power
#ifdef INA3221_CALC_CHARGE_AH
, charge_ah
#endif
#ifdef INA3221_CALC_ENERGY_WH
, energy_wh
#endif
);
}
} // if active
} // for channel
} // for device
}
#endif
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xsns100(uint32_t function)
{
if (!I2cEnabled(XI2C_72)) { return false; }
bool result = false;
if (FUNC_INIT == function) {
Ina3221Detect();
}
else if (Ina3221Data) {
switch (function) {
case FUNC_COMMAND_SENSOR:
if (XSNS_100 == XdrvMailbox.index) {
result = Ina3221CmndSensor();
}
break;
case FUNC_EVERY_250_MSECOND:
Ina3221Every250ms();
break;
case FUNC_JSON_APPEND:
Ina3221Show(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
Ina3221Show(0);
break;
#endif // USE_WEBSERVER
#ifdef USE_DEEPSLEEP
case FUNC_SAVE_BEFORE_RESTART:
for (uint8_t device; device < Ina3221count ; device++)
Ina3221PowerDown(device);
break;
#endif // USE_DEEPSLEEP }
}
}
return result;
}
#endif // USE_INA3221
#endif // USE_I2C
Reference in New Issue View Git Blame Copy Permalink