| .. |
|
language
|
Oops
|
2019-10-14 16:20:36 +02:00 |
|
Parsing.cpp
|
Change NULL to nullptr
|
2019-03-26 18:26:50 +01:00 |
|
StackThunk_light.cpp
|
Fix Force Elliptic Curve for Letsencrypt TLS #6042
|
2019-07-12 08:11:40 +02:00 |
|
StackThunk_light.h
|
Support for AWS IoT via TLS 1.2
|
2019-06-05 11:44:52 +02:00 |
|
WiFiClientSecureLightBearSSL.cpp
|
sendmail with bearsssl-light
|
2019-10-14 10:14:17 +02:00 |
|
WiFiClientSecureLightBearSSL.h
|
Fixed compilation error when USE_MQTT_AWS_IOT set and USE_MQTT_TLS disabled
|
2019-06-30 18:50:42 +02:00 |
|
_changelog.ino
|
Change Sonoff L1 support
|
2019-10-17 12:20:26 +02:00 |
|
core_esp8266_timer.c
|
Disable patched core PWM
|
2019-01-27 12:42:05 +01:00 |
|
core_esp8266_wiring_digital.c
|
Disable patched core PWM
|
2019-01-27 12:42:05 +01:00 |
|
core_esp8266_wiring_pwm.c
|
Allow full power PWM
|
2019-05-02 23:08:31 +02:00 |
|
i18n.h
|
Uppercase USE_A4988_STEPPER
|
2019-10-15 14:33:37 -04:00 |
|
my_user_config.h
|
Changed the type for getting sensor values to polling. Before we used the "working period" method (the sensor starts/stops periodically on it's own and reports the data if Tasmota asks for values). Because of that I've detected a drift after some time which means that you don't get current values if "tele_period" is reached. Another point was that the "working period" method only allows a frequency above 1 minute. The new code starts the sensor directly (with commands sleep and work) if we reached a time we set in define "STARTING_OFFSET". 5 seconds before tele_period, we are doing 4 measurements, calculate the average and current values are present if tele_period is reached. The new method allows us also to get a polling frequency below 1 minute (usable for early fire detection). For precise measurements values of STARTING_OFFSET above 30 seconds are recommended. If using STARTING_OFFSET of 30 seconds and tele_period of 30 seconds the sensor now runs permanent.
|
2019-10-17 13:10:43 +02:00 |
|
sendemail.h
|
sendmail with bearsssl-light
|
2019-10-14 10:14:17 +02:00 |
|
sendemail.ino
|
sendmail with bearsssl-light
|
2019-10-14 10:14:17 +02:00 |
|
settings.h
|
Clean up
|
2019-10-14 16:47:47 +02:00 |
|
settings.ino
|
Add reset after four Quick Power Cycles
|
2019-10-16 19:00:20 +02:00 |
|
sonoff.h
|
Change PowerCycleTime form 10 to 8 seconds
|
2019-10-17 10:30:43 +02:00 |
|
sonoff.ino
|
Change PowerCycleTime form 10 to 8 seconds
|
2019-10-17 10:30:43 +02:00 |
|
sonoff_ca.ino
|
Remove non-ASCII symbols
|
2019-08-14 17:27:51 +03:00 |
|
sonoff_post.h
|
Prep for release
|
2019-10-17 16:51:20 +02:00 |
|
sonoff_template.h
|
Change Sonoff L1 support
|
2019-10-17 12:20:26 +02:00 |
|
sonoff_version.h
|
Add DimmerRange command and support longer dimmer ranges. Fixes #6605
|
2019-10-10 15:53:01 +01:00 |
|
support.ino
|
Fix crash when uneven string size
|
2019-10-15 08:27:32 +02:00 |
|
support_button.ino
|
Refactor and document power control
|
2019-09-04 12:20:04 +02:00 |
|
support_command.ino
|
Add rule support after every command execution
|
2019-10-15 16:23:37 +02:00 |
|
support_features.ino
|
Change Sonoff L1 support
|
2019-10-17 12:20:26 +02:00 |
|
support_float.ino
|
Removed float conversion and used changeUIntScale instead
|
2019-08-05 14:24:50 +02:00 |
|
support_rotary.ino
|
Refactor Button, Switch and Rotary to save code space
|
2019-08-17 16:19:58 +02:00 |
|
support_rtc.ino
|
Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00
|
2019-09-25 14:24:49 +02:00 |
|
support_static_buffer.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
support_switch.ino
|
Refactor and document power control
|
2019-09-04 12:20:04 +02:00 |
|
support_udp.ino
|
update scripter hue without devices
|
2019-10-02 13:38:05 +02:00 |
|
support_wifi.ino
|
Fix compile errors relatd to LWIP_IPV6
|
2019-10-14 12:34:01 +02:00 |
|
user_config_override_sample.h
|
Tiny typo fix in comment
|
2019-01-17 15:29:41 +01:00 |
|
xdrv_01_webserver.ino
|
Tabs to spaces
|
2019-10-15 17:37:02 +02:00 |
|
xdrv_02_mqtt.ino
|
Change command handling
|
2019-10-02 16:45:53 +02:00 |
|
xdrv_03_energy.ino
|
(Try to) fix EnergyReset
|
2019-10-16 11:09:48 +02:00 |
|
xdrv_04_light.ino
|
Add max colors for color drivers
|
2019-10-17 10:45:51 +02:00 |
|
xdrv_05_irremote.ino
|
Fix Rules were not triggered with IR unknown protocol or in sonoff-it (#6629)
|
2019-10-13 22:16:13 +02:00 |
|
xdrv_05_irremote_full.ino
|
Fix Rules were not triggered with IR unknown protocol or in sonoff-it (#6629)
|
2019-10-13 22:16:13 +02:00 |
|
xdrv_06_snfbridge.ino
|
Add define USE_SONOFF_RF
|
2019-10-15 15:37:22 +02:00 |
|
xdrv_07_domoticz.ino
|
Fix domoticz core 2.3.0 compilation error
|
2019-10-02 17:39:27 +02:00 |
|
xdrv_08_serial_bridge.ino
|
Fix crash when uneven string size
|
2019-10-15 08:27:32 +02:00 |
|
xdrv_09_timers.ino
|
Change JSON output format for some commands
|
2019-09-12 14:19:44 +02:00 |
|
xdrv_10_rules.ino
|
Change max rule compare string size from 23 to 79
|
2019-10-12 16:42:11 +02:00 |
|
xdrv_10_scripter.ino
|
scripter better button event
|
2019-10-16 05:33:22 +02:00 |
|
xdrv_11_knx.ino
|
Fix possible KNX compilation error
|
2019-10-16 14:04:01 +02:00 |
|
xdrv_12_home_assistant.ino
|
Update xdrv_12_home_assistant.ino
|
2019-10-10 15:00:26 -03:00 |
|
xdrv_13_display.ino
|
touch button update, fix display settings font and size
|
2019-09-06 10:11:50 +02:00 |
|
xdrv_14_mp3.ino
|
Update xdrv_14_mp3.ino
|
2019-08-08 08:28:59 +02:00 |
|
xdrv_15_pca9685.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xdrv_16_tuyamcu.ino
|
Fix JSON and functionality
|
2019-10-11 11:23:53 +02:00 |
|
xdrv_17_rcswitch.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xdrv_18_armtronix_dimmers.ino
|
Fix TuyaMcu, Armtronix and Ps16dz
|
2019-10-09 16:55:15 +02:00 |
|
xdrv_19_ps16dz_dimmer.ino
|
Change Sonoff L1 support
|
2019-10-17 12:20:26 +02:00 |
|
xdrv_20_hue.ino
|
update scripter hue without devices
|
2019-10-02 13:38:05 +02:00 |
|
xdrv_21_wemo.ino
|
Fix WeMo emulation for 1G echo and 2G echo dot (#6086)
|
2019-07-13 16:31:53 +02:00 |
|
xdrv_22_sonoff_ifan.ino
|
Add rule support after every command execution
|
2019-10-15 16:23:37 +02:00 |
|
xdrv_23_zigbee_0_constants.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
xdrv_23_zigbee_3_devices.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
xdrv_23_zigbee_5_converters.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
xdrv_23_zigbee_7_statemachine.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
xdrv_23_zigbee_8_parsers.ino
|
Add Zigbee additional commands and sending messages to control devices (#6095)
|
2019-10-13 12:56:52 +02:00 |
|
xdrv_23_zigbee_9_impl.ino
|
Fix crash when uneven string size
|
2019-10-15 08:27:32 +02:00 |
|
xdrv_24_buzzer.ino
|
Add rule support after every command execution
|
2019-10-15 16:23:37 +02:00 |
|
xdrv_25_A4988_Stepper.ino
|
Fix USE_A4988_STEPPER compilation
|
2019-10-17 15:28:46 +02:00 |
|
xdrv_26_ariluxrf.ino
|
Finish light driver redesign
|
2019-10-08 18:05:02 +02:00 |
|
xdrv_27_shutter.ino
|
Fix overflow
|
2019-10-13 09:36:53 +02:00 |
|
xdrv_28_pcf8574.ino
|
Fix some errors...
|
2019-10-13 17:54:06 +02:00 |
|
xdrv_29_deepsleep.ino
|
Add deep sleep support
|
2019-10-14 16:12:59 +02:00 |
|
xdrv_99_debug.ino
|
Add I2C debug tools
|
2019-10-06 16:39:11 +02:00 |
|
xdrv_interface.ino
|
Try to catch domoticz test
|
2019-10-02 12:51:37 +02:00 |
|
xdsp_01_lcd.ino
|
Add display features
|
2019-07-23 14:05:42 +02:00 |
|
xdsp_02_ssd1306.ino
|
Allow user control over clock text size
|
2019-09-11 17:04:39 +02:00 |
|
xdsp_03_matrix.ino
|
Add display features
|
2019-07-23 14:05:42 +02:00 |
|
xdsp_04_ili9341.ino
|
Add display features
|
2019-07-23 14:05:42 +02:00 |
|
xdsp_05_epaper_29.ino
|
epaper display 29 fix
|
2019-09-08 20:48:47 +02:00 |
|
xdsp_06_epaper_42.ino
|
Restore define USE_DISPLAY_EPAPER_42
|
2019-08-23 17:33:30 +02:00 |
|
xdsp_07_sh1106.ino
|
Allow user control over clock text size
|
2019-09-11 17:04:39 +02:00 |
|
xdsp_08_ILI9488.ino
|
touch button update, fix display settings font and size
|
2019-09-06 10:11:50 +02:00 |
|
xdsp_09_SSD1351.ino
|
display update
|
2019-08-23 10:26:09 +02:00 |
|
xdsp_10_RA8876.ino
|
touch button update, fix display settings font and size
|
2019-09-06 10:11:50 +02:00 |
|
xdsp_interface.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xlgt_01_ws2812.ino
|
Redesign light driver phase 3
|
2019-10-08 17:46:03 +02:00 |
|
xlgt_02_my92x1.ino
|
Fix My92x1 driver
|
2019-10-07 11:56:20 +02:00 |
|
xlgt_03_sm16716.ino
|
Redesign light driver phase 1
|
2019-10-06 17:19:05 +02:00 |
|
xlgt_04_sm2135.ino
|
Redesign light driver phase 1
|
2019-10-06 17:19:05 +02:00 |
|
xlgt_05_sonoff_l1.ino
|
Change Sonoff L1 support
|
2019-10-17 12:20:26 +02:00 |
|
xlgt_interface.ino
|
Redesign light driver phase 1
|
2019-10-06 17:19:05 +02:00 |
|
xnrg_01_hlw8012.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_02_cse7766.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_03_pzem004t.ino
|
Fix PZEM default address and detection
|
2019-10-08 13:18:10 +02:00 |
|
xnrg_04_mcp39f501.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_05_pzem_ac.ino
|
Fix PZEM default address and detection
|
2019-10-08 13:18:10 +02:00 |
|
xnrg_06_pzem_dc.ino
|
Fix PZEM default address and detection
|
2019-10-08 13:18:10 +02:00 |
|
xnrg_07_ade7953.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_08_sdm120.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_09_dds2382.ino
|
Add command SetOption71 for DDS238-2
|
2019-10-02 11:24:51 +02:00 |
|
xnrg_10_sdm630.ino
|
Fix PZEM missing phase zeroing all readings
|
2019-09-21 17:10:52 +02:00 |
|
xnrg_11_ddsu666.ino
|
add support to chint ddsu666
|
2019-10-03 10:06:51 +02:00 |
|
xnrg_interface.ino
|
Refactor energy driver selection
|
2019-09-08 17:21:26 +02:00 |
|
xsns_01_counter.ino
|
Minor Refactor
|
2019-08-13 17:33:35 +02:00 |
|
xsns_02_analog.ino
|
Change JSON output format for some commands
|
2019-09-12 14:19:44 +02:00 |
|
xsns_04_snfsc.ino
|
Make Sonoff Sc optional by define
|
2019-10-14 18:15:43 +02:00 |
|
xsns_05_ds18x20.ino
|
Refactor ds18x20.ino
|
2019-09-25 16:28:54 +02:00 |
|
xsns_06_dht.ino
|
Change ToHex to ToHex_P PROGMEM compatible
|
2019-08-13 19:53:12 +02:00 |
|
xsns_07_sht1x.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_08_htu21.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_09_bmp.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_10_bh1750.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_11_veml6070.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_12_ads1115.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_12_ads1115_i2cdev.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_13_ina219.ino
|
Added support for multiple INA219 devices on single I2C buss.
|
2019-07-08 20:55:48 -05:00 |
|
xsns_14_sht3x.ino
|
Workaround invalid detection of SHT3x sensors
|
2019-07-11 10:56:12 +02:00 |
|
xsns_15_mhz19.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_16_tsl2561.ino
|
Shrink code/flash space pt.2/2
|
2019-03-23 17:57:31 +01:00 |
|
xsns_17_senseair.ino
|
Fix exception 28 due to regression from 6.5.0.1 (#5822)
|
2019-05-19 12:07:20 +02:00 |
|
xsns_18_pms5003.ino
|
Added support for PMS3003
|
2019-10-16 12:10:48 +02:00 |
|
xsns_19_mgs.ino
|
Shrink code/flash space pt.2/2
|
2019-03-23 17:57:31 +01:00 |
|
xsns_20_novasds.ino
|
Changed the type for getting sensor values to polling. Before we used the "working period" method (the sensor starts/stops periodically on it's own and reports the data if Tasmota asks for values). Because of that I've detected a drift after some time which means that you don't get current values if "tele_period" is reached. Another point was that the "working period" method only allows a frequency above 1 minute. The new code starts the sensor directly (with commands sleep and work) if we reached a time we set in define "STARTING_OFFSET". 5 seconds before tele_period, we are doing 4 measurements, calculate the average and current values are present if tele_period is reached. The new method allows us also to get a polling frequency below 1 minute (usable for early fire detection). For precise measurements values of STARTING_OFFSET above 30 seconds are recommended. If using STARTING_OFFSET of 30 seconds and tele_period of 30 seconds the sensor now runs permanent.
|
2019-10-17 13:10:43 +02:00 |
|
xsns_21_sgp30.ino
|
Bracketing is an art... I was once told :)
|
2019-09-18 22:49:19 +02:00 |
|
xsns_22_sr04.ino
|
Change NULL to nullptr
|
2019-03-26 18:26:50 +01:00 |
|
xsns_23_sdm120.ino
|
Fix SDM120 Energy Value to Domoticz
|
2019-07-03 18:56:06 -03:00 |
|
xsns_24_si1145.ino
|
Shrink code/flash space pt.2/2
|
2019-03-23 17:57:31 +01:00 |
|
xsns_25_sdm630.ino
|
Final fix
|
2019-07-04 13:43:27 +02:00 |
|
xsns_26_lm75ad.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_27_apds9960.ino
|
Provide function FastPrecisePowf
|
2019-05-18 16:54:29 +02:00 |
|
xsns_28_tm1638.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_29_mcp230xx.ino
|
MCP230xx Add sensor29 pin,2 for toggle
|
2019-10-01 08:49:40 +02:00 |
|
xsns_30_mpr121.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_31_ccs811.ino
|
global update fix
|
2019-05-22 12:22:58 +02:00 |
|
xsns_32_mpu6050.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_33_ds3231.ino
|
Bump version to 6.6.0.12
|
2019-09-10 16:18:23 +02:00 |
|
xsns_34_hx711.ino
|
Refactor HX711 sensor driver
|
2019-09-22 14:13:06 +02:00 |
|
xsns_35_tx20.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_36_mgc3130.ino
|
Shrink code/flash space pt.2/2
|
2019-03-23 17:57:31 +01:00 |
|
xsns_37_rfsensor.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_38_az7798.ino
|
Refactor RTC saving code space
|
2019-08-17 16:49:17 +02:00 |
|
xsns_39_max31855.ino
|
All code moved to new file (xsnx_47_max31865.ino)
|
2019-07-28 19:36:22 -03:00 |
|
xsns_40_pn532.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xsns_41_max44009.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_42_scd30.ino
|
Refactor core command structure
|
2019-07-27 11:13:41 +02:00 |
|
xsns_43_hre.ino
|
Code optimization - Change for(uint8_t in for (uint32_t
|
2019-06-30 16:44:36 +02:00 |
|
xsns_44_sps30.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xsns_45_vl53l0x.ino
|
display update
|
2019-08-19 13:38:14 +02:00 |
|
xsns_46_MLX90614.ino
|
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
|
2019-06-16 16:43:23 +02:00 |
|
xsns_47_max31865.ino
|
Added check for USE_SPI enabled
|
2019-07-30 20:20:17 -03:00 |
|
xsns_48_chirp.ino
|
remove #define USE_CHIRP
|
2019-09-29 18:38:14 +02:00 |
|
xsns_49_solaxX1.ino
|
Refactor code
|
2019-08-10 18:12:25 +02:00 |
|
xsns_50_paj7620.ino
|
remove #define USE_PAJ7620 from driver code
|
2019-08-15 11:20:53 +02:00 |
|
xsns_51_rdm6300.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xsns_52_ibeacon.ino
|
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
|
2019-09-04 18:06:34 +02:00 |
|
xsns_53_sml.ino
|
sml fix obis dump mode
|
2019-09-30 10:53:16 +02:00 |
|
xsns_54_ina226.ino
|
Add support for up to 4 INA226 Voltage and Current sensors
|
2019-09-08 11:26:54 +02:00 |
|
xsns_interface.ino
|
Clean code
|
2019-08-18 15:21:38 +02:00 |
fa892d34c6