mirror of https://github.com/arendst/Tasmota.git
533 lines
24 KiB
C++
533 lines
24 KiB
C++
/*
|
|
support_button.ino - button support for Tasmota
|
|
|
|
Copyright (C) 2022 Federico Leoni and Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#define BUTTON_V3
|
|
#ifdef BUTTON_V3
|
|
/*********************************************************************************************\
|
|
* Button support with input filter
|
|
*
|
|
* Inspired by (https://github.com/OLIMEX/olimex-iot-firmware-esp8266/blob/master/olimex/user/user_switch2.c)
|
|
\*********************************************************************************************/
|
|
|
|
#define MAX_RELAY_BUTTON1 5 // Max number of relay controlled by BUTTON1
|
|
|
|
const uint8_t BUTTON_PROBE_INTERVAL = 10; // Time in milliseconds between button input probe
|
|
const uint8_t BUTTON_FAST_PROBE_INTERVAL = 2; // Time in milliseconds between button input probe for AC detection
|
|
const uint8_t BUTTON_AC_PERIOD = (20 + BUTTON_FAST_PROBE_INTERVAL - 1) / BUTTON_FAST_PROBE_INTERVAL; // Duration of an AC wave in probe intervals
|
|
|
|
const char kMultiPress[] PROGMEM =
|
|
"|SINGLE|DOUBLE|TRIPLE|QUAD|PENTA|CLEAR|";
|
|
|
|
#include <Ticker.h>
|
|
|
|
Ticker TickerButton;
|
|
|
|
struct BUTTON {
|
|
uint32_t debounce = 0; // Button debounce timer
|
|
uint32_t no_pullup_mask = 0; // key no pullup flag (1 = no pullup)
|
|
uint32_t pulldown_mask = 0; // key pulldown flag (1 = pulldown)
|
|
uint32_t inverted_mask = 0; // Key inverted flag (1 = inverted)
|
|
uint16_t hold_timer[MAX_KEYS] = { 0 }; // Timer for button hold
|
|
uint16_t dual_code = 0; // Sonoff dual received code
|
|
uint8_t state[MAX_KEYS] = { 0 };
|
|
uint8_t last_state[MAX_KEYS]; // Last button states
|
|
uint8_t virtual_state[MAX_KEYS]; // Virtual button states
|
|
uint8_t window_timer[MAX_KEYS] = { 0 }; // Max time between button presses to record press count
|
|
uint8_t press_counter[MAX_KEYS] = { 0 }; // Number of button presses within Button.window_timer
|
|
uint8_t dual_receive_count = 0; // Sonoff dual input flag
|
|
uint8_t first_change = 0;
|
|
uint8_t present = 0; // Number of buttons found flag
|
|
uint8_t mutex;
|
|
} Button;
|
|
|
|
#if defined(SOC_TOUCH_VERSION_1) || defined(SOC_TOUCH_VERSION_2)
|
|
struct TOUCH_BUTTON {
|
|
uint32_t touch_mask = 0; // Touch flag (1 = enabled)
|
|
uint32_t calibration = 0; // Bitfield
|
|
uint8_t hits[MAX_KEYS] = { 0 }; // Hits in a row to filter out noise
|
|
} TOUCH_BUTTON;
|
|
#endif // ESP32 SOC_TOUCH_VERSION_1 or SOC_TOUCH_VERSION_2
|
|
|
|
/********************************************************************************************/
|
|
|
|
void ButtonPullupFlag(uint32_t button_bit) {
|
|
bitSet(Button.no_pullup_mask, button_bit);
|
|
}
|
|
|
|
void ButtonPulldownFlag(uint32_t button_bit) {
|
|
bitSet(Button.pulldown_mask, button_bit);
|
|
}
|
|
|
|
void ButtonInvertFlag(uint32_t button_bit) {
|
|
bitSet(Button.inverted_mask, button_bit);
|
|
}
|
|
|
|
#if defined(SOC_TOUCH_VERSION_1) || defined(SOC_TOUCH_VERSION_2)
|
|
void ButtonTouchFlag(uint32_t button_bit) {
|
|
bitSet(TOUCH_BUTTON.touch_mask, button_bit);
|
|
}
|
|
#endif // ESP32 SOC_TOUCH_VERSION_1 or SOC_TOUCH_VERSION_2
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void ButtonProbe(void) {
|
|
if (Button.mutex || (TasmotaGlobal.uptime < 4)) { return; } // Block GPIO for 4 seconds after poweron to workaround Wemos D1 / Obi RTS circuit
|
|
Button.mutex = 1;
|
|
|
|
uint32_t state_filter;
|
|
uint32_t first_change = Button.first_change;
|
|
uint32_t debounce_flags = Settings->button_debounce % 10;
|
|
bool force_high = (debounce_flags &1); // 51, 101, 151 etc
|
|
bool force_low = (debounce_flags &2); // 52, 102, 152 etc
|
|
bool ac_detect = (debounce_flags == 9); // 39, 49, 59 etc
|
|
|
|
if (ac_detect) {
|
|
if (Settings->button_debounce < 2 * BUTTON_AC_PERIOD * BUTTON_FAST_PROBE_INTERVAL + 9) {
|
|
state_filter = 2 * BUTTON_AC_PERIOD;
|
|
} else if (Settings->button_debounce > (0x7f - 2 * BUTTON_AC_PERIOD) * BUTTON_FAST_PROBE_INTERVAL) {
|
|
state_filter = 0x7f;
|
|
} else {
|
|
state_filter = (Settings->button_debounce - 9) / BUTTON_FAST_PROBE_INTERVAL;
|
|
}
|
|
} else {
|
|
state_filter = Settings->button_debounce / BUTTON_PROBE_INTERVAL; // 5, 10, 15
|
|
}
|
|
|
|
for (uint32_t i = 0; i < MAX_KEYS; i++) {
|
|
if (!PinUsed(GPIO_KEY1, i)) { continue; }
|
|
|
|
bool button_not_activated;
|
|
#if defined(SOC_TOUCH_VERSION_1) || defined(SOC_TOUCH_VERSION_2)
|
|
if (bitRead(TOUCH_BUTTON.touch_mask, i)) {
|
|
if (ac_detect || bitRead(TOUCH_BUTTON.calibration, i +1)) { continue; } // Touch is slow. Takes 21mS to read
|
|
uint32_t value = touchRead(Pin(GPIO_KEY1, i));
|
|
#ifdef SOC_TOUCH_VERSION_2
|
|
button_not_activated = (value < Settings->touch_threshold); // ESPS3 No touch = 24200, Touch > 40000
|
|
#else
|
|
button_not_activated = ((value == 0) || (value > Settings->touch_threshold)); // ESP32 No touch = 74, Touch < 40
|
|
#endif
|
|
} else
|
|
#endif // ESP32 SOC_TOUCH_VERSION_1 or SOC_TOUCH_VERSION_2
|
|
button_not_activated = (digitalRead(Pin(GPIO_KEY1, i)) != bitRead(Button.inverted_mask, i));
|
|
|
|
if (button_not_activated) {
|
|
|
|
if (ac_detect) { // Enabled with ButtonDebounce x9
|
|
Button.state[i] |= 0x80;
|
|
if (Button.state[i] > 0x80) {
|
|
Button.state[i]--;
|
|
if (0x80 == Button.state[i]) {
|
|
Button.virtual_state[i] = 0;
|
|
Button.first_change = false;
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (force_high) { // Enabled with ButtonDebounce x1
|
|
if (1 == Button.virtual_state[i]) {
|
|
Button.state[i] = state_filter; // With noisy input keep current state 1 unless constant 0
|
|
}
|
|
}
|
|
|
|
if (Button.state[i] < state_filter) {
|
|
Button.state[i]++;
|
|
if (state_filter == Button.state[i]) {
|
|
Button.virtual_state[i] = 1;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (ac_detect) { // Enabled with ButtonDebounce x9
|
|
/*
|
|
* Moes MS-104B and similar devices using an AC detection circuitry
|
|
* on their switch inputs generating an ~4 ms long low pulse every
|
|
* AC wave. We start the time measurement on the falling edge.
|
|
*
|
|
* state: bit7: previous state, bit6..0: counter
|
|
*/
|
|
if (Button.state[i] & 0x80) {
|
|
Button.state[i] &= 0x7f;
|
|
if (Button.state[i] < state_filter - 2 * BUTTON_AC_PERIOD) {
|
|
Button.state[i] += 2 * BUTTON_AC_PERIOD;
|
|
} else {
|
|
Button.state[i] = state_filter;
|
|
Button.virtual_state[i] = 1;
|
|
if (first_change) {
|
|
Button.last_state[i] = 1;
|
|
Button.first_change = false;
|
|
}
|
|
}
|
|
} else {
|
|
if (Button.state[i] > 0x00) {
|
|
Button.state[i]--;
|
|
if (0x00 == Button.state[i]) {
|
|
Button.virtual_state[i] = 0;
|
|
Button.first_change = false;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (force_low) { // Enabled with ButtonDebounce x2
|
|
if (0 == Button.virtual_state[i]) {
|
|
Button.state[i] = 0; // With noisy input keep current state 0 unless constant 1
|
|
}
|
|
}
|
|
|
|
if (Button.state[i] > 0) {
|
|
Button.state[i]--;
|
|
if (0 == Button.state[i]) {
|
|
Button.virtual_state[i] = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
Button.mutex = 0;
|
|
}
|
|
|
|
void ButtonInit(void) {
|
|
bool ac_detect = (Settings->button_debounce % 10 == 9);
|
|
|
|
Button.present = 0;
|
|
#ifdef ESP8266
|
|
if ((SONOFF_DUAL == TasmotaGlobal.module_type) || (CH4 == TasmotaGlobal.module_type)) {
|
|
Button.present++;
|
|
}
|
|
#endif // ESP8266
|
|
for (uint32_t i = 0; i < MAX_KEYS; i++) {
|
|
Button.last_state[i] = NOT_PRESSED;
|
|
if (PinUsed(GPIO_KEY1, i)) {
|
|
Button.present++;
|
|
#ifdef ESP8266
|
|
pinMode(Pin(GPIO_KEY1, i), bitRead(Button.no_pullup_mask, i) ? INPUT : ((16 == Pin(GPIO_KEY1, i)) ? INPUT_PULLDOWN_16 : INPUT_PULLUP));
|
|
#endif // ESP8266
|
|
#ifdef ESP32
|
|
pinMode(Pin(GPIO_KEY1, i), bitRead(Button.pulldown_mask, i) ? INPUT_PULLDOWN : bitRead(Button.no_pullup_mask, i) ? INPUT : INPUT_PULLUP);
|
|
#endif // ESP32
|
|
if (ac_detect) {
|
|
Button.state[i] = 0x80 + 2 * BUTTON_AC_PERIOD;
|
|
Button.last_state[i] = 0; // Will set later in the debouncing code
|
|
} else {
|
|
// Set global now so doesn't change the saved power state on first button check
|
|
Button.last_state[i] = (digitalRead(Pin(GPIO_KEY1, i)) != bitRead(Button.inverted_mask, i));
|
|
}
|
|
}
|
|
#ifdef USE_ADC
|
|
else if (PinUsed(GPIO_ADC_BUTTON, i) || PinUsed(GPIO_ADC_BUTTON_INV, i)) {
|
|
Button.present++;
|
|
}
|
|
#endif // USE_ADC
|
|
Button.virtual_state[i] = Button.last_state[i];
|
|
}
|
|
if (Button.present) {
|
|
Button.first_change = true;
|
|
TickerButton.attach_ms((ac_detect) ? BUTTON_FAST_PROBE_INTERVAL : BUTTON_PROBE_INTERVAL, ButtonProbe);
|
|
}
|
|
}
|
|
|
|
uint8_t ButtonSerial(uint8_t serial_in_byte) {
|
|
if (Button.dual_receive_count) {
|
|
Button.dual_receive_count--;
|
|
if (Button.dual_receive_count) {
|
|
Button.dual_code = (Button.dual_code << 8) | serial_in_byte;
|
|
serial_in_byte = 0;
|
|
} else {
|
|
if (serial_in_byte != 0xA1) {
|
|
Button.dual_code = 0; // 0xA1 - End of Sonoff dual button code
|
|
}
|
|
}
|
|
}
|
|
if (0xA0 == serial_in_byte) { // 0xA0 - Start of Sonoff dual button code
|
|
serial_in_byte = 0;
|
|
Button.dual_code = 0;
|
|
Button.dual_receive_count = 3;
|
|
}
|
|
|
|
return serial_in_byte;
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Button handler with single press only or multi-press and hold on all buttons
|
|
*
|
|
* ButtonDebounce (50) - Debounce time in mSec
|
|
* SetOption1 (0) - If set do not execute commands WifiConfig and Reset
|
|
* SetOption11 (0) - If set perform single press action on double press and reverse (on two relay devices only)
|
|
* SetOption13 (0) - If set act on single press only
|
|
* SetOption32 (40) - Button held for factor times longer
|
|
* SetOption40 (0) - Do not ignore button hold
|
|
* SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
\*********************************************************************************************/
|
|
|
|
void ButtonHandler(void) {
|
|
if (TasmotaGlobal.uptime < 4) { return; } // Block GPIO for 4 seconds after poweron to workaround Wemos D1 / Obi RTS circuit
|
|
|
|
uint8_t hold_time_extent = IMMINENT_RESET_FACTOR; // Extent hold time factor in case of iminnent Reset command
|
|
uint16_t loops_per_second = 1000 / Settings->button_debounce; // ButtonDebounce (50)
|
|
char scmnd[20];
|
|
|
|
for (uint32_t button_index = 0; button_index < MAX_KEYS; button_index++) {
|
|
uint8_t button = NOT_PRESSED;
|
|
uint8_t button_present = 0;
|
|
|
|
#ifdef ESP8266
|
|
if (!button_index && ((SONOFF_DUAL == TasmotaGlobal.module_type) || (CH4 == TasmotaGlobal.module_type))) {
|
|
button_present = 1;
|
|
if (Button.dual_code) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON " " D_CODE " %04X"), Button.dual_code);
|
|
button = PRESSED;
|
|
if (0xF500 == Button.dual_code) { // Button hold
|
|
Button.hold_timer[button_index] = (loops_per_second * Settings->param[P_HOLD_TIME] / 10) -1; // SetOption32 (40)
|
|
hold_time_extent = 1;
|
|
}
|
|
Button.dual_code = 0;
|
|
}
|
|
} else
|
|
#endif // ESP8266
|
|
if (PinUsed(GPIO_KEY1, button_index)) {
|
|
|
|
#if defined(SOC_TOUCH_VERSION_1) || defined(SOC_TOUCH_VERSION_2)
|
|
if (bitRead(TOUCH_BUTTON.touch_mask, button_index) && bitRead(TOUCH_BUTTON.calibration, button_index +1)) { // Touch
|
|
uint32_t _value = touchRead(Pin(GPIO_KEY1, button_index));
|
|
#ifdef SOC_TOUCH_VERSION_2
|
|
if (_value > Settings->touch_threshold) { // ESPS3 No touch = 24200, Touch = 100000
|
|
#else
|
|
if ((_value > 0) && (_value < Settings->touch_threshold)) { // ESP32 No touch = 74, Touch = 20 (Probably read-error (0))
|
|
#endif
|
|
TOUCH_BUTTON.hits[button_index]++;
|
|
} else {
|
|
TOUCH_BUTTON.hits[button_index] = 0;
|
|
}
|
|
AddLog(LOG_LEVEL_INFO, PSTR("PLOT: %u, %u, %u,"), button_index +1, _value, TOUCH_BUTTON.hits[button_index]); // Button number (1..4), value, continuous hits under threshold
|
|
continue;
|
|
} else
|
|
#endif // ESP32 SOC_TOUCH_VERSION_1 or SOC_TOUCH_VERSION_2
|
|
|
|
button_present = 1;
|
|
button = Button.virtual_state[button_index];
|
|
}
|
|
#ifdef USE_ADC
|
|
else if (PinUsed(GPIO_ADC_BUTTON, button_index)) {
|
|
button_present = 1;
|
|
button = AdcGetButton(Pin(GPIO_ADC_BUTTON, button_index));
|
|
}
|
|
else if (PinUsed(GPIO_ADC_BUTTON_INV, button_index)) {
|
|
button_present = 1;
|
|
button = AdcGetButton(Pin(GPIO_ADC_BUTTON_INV, button_index));
|
|
}
|
|
#endif // USE_ADC
|
|
if (button_present) {
|
|
XdrvMailbox.index = button_index;
|
|
XdrvMailbox.payload = button;
|
|
if (XdrvCall(FUNC_BUTTON_PRESSED)) {
|
|
// Serviced
|
|
}
|
|
#ifdef ESP8266
|
|
else if (SONOFF_4CHPRO == TasmotaGlobal.module_type) {
|
|
if (Button.hold_timer[button_index]) { Button.hold_timer[button_index]--; }
|
|
|
|
bool button_pressed = false;
|
|
if ((PRESSED == button) && (NOT_PRESSED == Button.last_state[button_index])) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_LEVEL_10), button_index +1);
|
|
Button.hold_timer[button_index] = loops_per_second;
|
|
button_pressed = true;
|
|
}
|
|
if ((NOT_PRESSED == button) && (PRESSED == Button.last_state[button_index])) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_LEVEL_01), button_index +1);
|
|
if (!Button.hold_timer[button_index]) { button_pressed = true; } // Do not allow within 1 second
|
|
}
|
|
if (button_pressed) {
|
|
if (!Settings->flag3.mqtt_buttons) { // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
if (!SendKey(KEY_BUTTON, button_index +1, POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
|
|
ExecuteCommandPower(button_index +1, POWER_TOGGLE, SRC_BUTTON); // Execute Toggle command internally
|
|
}
|
|
} else {
|
|
MqttButtonTopic(button_index +1, 1, 0); // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
}
|
|
}
|
|
}
|
|
#endif // ESP8266
|
|
else {
|
|
if ((PRESSED == button) && (NOT_PRESSED == Button.last_state[button_index])) {
|
|
|
|
if (Settings->flag.button_single) { // SetOption13 (0) - Allow only single button press for immediate action,
|
|
if (!Settings->flag3.mqtt_buttons) { // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_IMMEDIATE), button_index +1);
|
|
if (!SendKey(KEY_BUTTON, button_index +1, POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
|
|
ExecuteCommandPower(button_index +1, POWER_TOGGLE, SRC_BUTTON); // Execute Toggle command internally
|
|
}
|
|
} else {
|
|
MqttButtonTopic(button_index +1, 1, 0); // SetOption73 1 - Decouple button from relay and send just mqtt topic
|
|
}
|
|
} else {
|
|
Button.press_counter[button_index] = (Button.window_timer[button_index]) ? Button.press_counter[button_index] +1 : 1;
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_MULTI_PRESS " %d"), button_index +1, Button.press_counter[button_index]);
|
|
Button.window_timer[button_index] = loops_per_second / 2; // 0.5 second multi press window
|
|
}
|
|
TasmotaGlobal.blinks = 201;
|
|
}
|
|
|
|
if (NOT_PRESSED == button) {
|
|
Button.hold_timer[button_index] = 0;
|
|
if (Settings->flag3.mqtt_buttons && (PRESSED == Button.last_state[button_index]) && !Button.press_counter[button_index]) { // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
MqttButtonTopic(button_index +1, 6, 0);
|
|
}
|
|
} else {
|
|
Button.hold_timer[button_index]++;
|
|
if (Settings->flag.button_single) { // SetOption13 (0) - Allow only single button press for immediate action
|
|
if (Button.hold_timer[button_index] == loops_per_second * hold_time_extent * Settings->param[P_HOLD_TIME] / 10) { // SetOption32 (40) - Button held for factor times longer
|
|
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_SETOPTION "13 0")); // Disable single press only
|
|
ExecuteCommand(scmnd, SRC_BUTTON);
|
|
}
|
|
} else {
|
|
if (Button.hold_timer[button_index] == loops_per_second * Settings->param[P_HOLD_TIME] / 10) { // SetOption32 (40) - Button hold
|
|
Button.press_counter[button_index] = 0;
|
|
if (Settings->flag3.mqtt_buttons) { // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
MqttButtonTopic(button_index +1, 3, 1);
|
|
} else {
|
|
SendKey(KEY_BUTTON, button_index +1, POWER_HOLD); // Execute Hold command via MQTT if ButtonTopic is set
|
|
}
|
|
} else {
|
|
if (Settings->flag.button_restrict) { // SetOption1 (0) - Control button multipress
|
|
if (Settings->param[P_HOLD_IGNORE] > 0) { // SetOption40 (0) - Do not ignore button hold
|
|
if (Button.hold_timer[button_index] > loops_per_second * Settings->param[P_HOLD_IGNORE] / 10) {
|
|
Button.hold_timer[button_index] = 0; // Reset button hold counter to stay below hold trigger
|
|
Button.press_counter[button_index] = 0; // Discard button press to disable functionality
|
|
}
|
|
}
|
|
} else {
|
|
if ((Button.hold_timer[button_index] == loops_per_second * hold_time_extent * Settings->param[P_HOLD_TIME] / 10)) { // SetOption32 (40) - Button held for factor times longer
|
|
Button.press_counter[button_index] = 0;
|
|
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_RESET " 1"));
|
|
ExecuteCommand(scmnd, SRC_BUTTON);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!Settings->flag.button_single) { // SetOption13 (0) - Allow multi-press
|
|
if (Button.window_timer[button_index]) {
|
|
Button.window_timer[button_index]--;
|
|
} else {
|
|
if (!TasmotaGlobal.restart_flag && !Button.hold_timer[button_index] && (Button.press_counter[button_index] > 0) && (Button.press_counter[button_index] < 7)) {
|
|
|
|
bool single_press = false;
|
|
if (Button.press_counter[button_index] < 3) { // Single or Double press
|
|
#ifdef ESP8266
|
|
if ((SONOFF_DUAL_R2 == TasmotaGlobal.module_type) || (SONOFF_DUAL == TasmotaGlobal.module_type) || (CH4 == TasmotaGlobal.module_type)) {
|
|
single_press = true;
|
|
} else
|
|
#endif // ESP8266
|
|
{
|
|
single_press = (Settings->flag.button_swap +1 == Button.press_counter[button_index]); // SetOption11 (0)
|
|
if ((1 == Button.present) && (2 == TasmotaGlobal.devices_present)) { // Single Button with two devices only
|
|
if (Settings->flag.button_swap) { // SetOption11 (0)
|
|
Button.press_counter[button_index] = (single_press) ? 1 : 2;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
XdrvMailbox.index = button_index;
|
|
XdrvMailbox.payload = Button.press_counter[button_index];
|
|
if (XdrvCall(FUNC_BUTTON_MULTI_PRESSED)) {
|
|
// Serviced
|
|
} else
|
|
|
|
#ifdef ROTARY_V1
|
|
if (!RotaryButtonPressed(button_index)) {
|
|
#endif
|
|
if (!Settings->flag3.mqtt_buttons && single_press && SendKey(KEY_BUTTON, button_index + Button.press_counter[button_index], POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
|
|
// Success
|
|
} else {
|
|
if (Button.press_counter[button_index] < 6) { // Single to Penta press
|
|
// if (WifiState() > WIFI_RESTART) { // Wifimanager active
|
|
// TasmotaGlobal.restart_flag = 1;
|
|
// }
|
|
if (!Settings->flag3.mqtt_buttons) { // SetOption73 - Detach buttons from relays and enable MQTT action state for multipress
|
|
if (Button.press_counter[button_index] == 1) { // By default first press always send a TOGGLE (2)
|
|
ExecuteCommandPower(button_index + Button.press_counter[button_index], POWER_TOGGLE, SRC_BUTTON);
|
|
} else {
|
|
SendKey(KEY_BUTTON, button_index +1, Button.press_counter[button_index] +9); // 2,3,4 and 5 press send just the key value (11,12,13 and 14) for rules
|
|
if (0 == button_index) { // BUTTON1 can toggle up to 5 relays if present. If a relay is not present will send out the key value (2,11,12,13 and 14) for rules
|
|
bool valid_relay = PinUsed(GPIO_REL1, Button.press_counter[button_index]-1);
|
|
#ifdef ESP8266
|
|
if ((SONOFF_DUAL == TasmotaGlobal.module_type) || (CH4 == TasmotaGlobal.module_type)) {
|
|
valid_relay = (Button.press_counter[button_index] <= TasmotaGlobal.devices_present);
|
|
}
|
|
#endif // ESP8266
|
|
if ((Button.press_counter[button_index] > 1) && valid_relay && (Button.press_counter[button_index] <= MAX_RELAY_BUTTON1)) {
|
|
ExecuteCommandPower(button_index + Button.press_counter[button_index], POWER_TOGGLE, SRC_BUTTON); // Execute Toggle command internally
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: Relay%d found on GPIO%d"), Button.press_counter[button_index], Pin(GPIO_REL1, Button.press_counter[button_index]-1));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
} else { // 6 press start wificonfig 2
|
|
if (!Settings->flag.button_restrict) { // SetOption1 - Control button multipress
|
|
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_WIFICONFIG " 2"));
|
|
ExecuteCommand(scmnd, SRC_BUTTON);
|
|
}
|
|
}
|
|
if (Settings->flag3.mqtt_buttons) { // SetOption73 (0) - Decouple button from relay and send just mqtt topic
|
|
if (Button.press_counter[button_index] >= 1 && Button.press_counter[button_index] <= 5) {
|
|
MqttButtonTopic(button_index +1, Button.press_counter[button_index], 0);
|
|
}
|
|
}
|
|
}
|
|
#ifdef ROTARY_V1
|
|
}
|
|
#endif
|
|
Button.press_counter[button_index] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
Button.last_state[button_index] = button;
|
|
}
|
|
}
|
|
|
|
void MqttButtonTopic(uint32_t button_id, uint32_t action, uint32_t hold) {
|
|
SendKey(KEY_BUTTON, button_id, (hold) ? 3 : action +9);
|
|
|
|
if (!Settings->flag.hass_discovery) { // SetOption19 - Control Home Assistant automatic discovery (See SetOption59)
|
|
char scommand[10];
|
|
snprintf_P(scommand, sizeof(scommand), PSTR(D_JSON_BUTTON "%d"), button_id);
|
|
char mqttstate[7];
|
|
Response_P(S_JSON_SVALUE_ACTION_SVALUE, scommand, (hold) ? SettingsText(SET_STATE_TXT4) : GetTextIndexed(mqttstate, sizeof(mqttstate), action, kMultiPress));
|
|
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, scommand);
|
|
}
|
|
}
|
|
|
|
void ButtonLoop(void) {
|
|
if (Button.present) {
|
|
if (TimeReached(Button.debounce)) {
|
|
SetNextTimeInterval(Button.debounce, Settings->button_debounce); // ButtonDebounce (50)
|
|
ButtonHandler();
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // BUTTON_V3
|