mirror of https://github.com/arendst/Tasmota.git
1330 lines
61 KiB
C++
1330 lines
61 KiB
C++
/*
|
|
xdrv_12_home_assistant.ino - home assistant support for Tasmota
|
|
|
|
Copyright (C) 2021 Erik Montnemery, Federico Leoni and Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_HOME_ASSISTANT
|
|
#undef USE_TASMOTA_DISCOVERY
|
|
/*********************************************************************************************\
|
|
* Legacy Home Assistant discovery now replaced by Tasmota Discovery and hatasmota in HASS
|
|
\*********************************************************************************************/
|
|
|
|
#define XDRV_12 12
|
|
|
|
#ifndef HOME_ASSISTANT_DISCOVERY_PREFIX
|
|
#define HOME_ASSISTANT_DISCOVERY_PREFIX "homeassistant" // Home Assistant discovery prefix
|
|
#endif
|
|
#ifndef HOME_ASSISTANT_LWT_TOPIC
|
|
#define HOME_ASSISTANT_LWT_TOPIC "homeassistant/status" // home Assistant Birth and Last Will Topic (default = homeassistant/status)
|
|
#endif
|
|
#ifndef HOME_ASSISTANT_LWT_SUBSCRIBE
|
|
#define HOME_ASSISTANT_LWT_SUBSCRIBE true // Subscribe to Home Assistant Birth and Last Will Topic (default = true)
|
|
#endif
|
|
|
|
// List of sensors ready for discovery
|
|
const char kHAssJsonSensorTypes[] PROGMEM =
|
|
D_JSON_TEMPERATURE "|" D_JSON_DEWPOINT "|" D_JSON_PRESSURE "|" D_JSON_PRESSUREATSEALEVEL "|"
|
|
D_JSON_APPARENT_POWERUSAGE "|Battery|" D_JSON_CURRENT "|" D_JSON_DISTANCE "|" D_JSON_FREQUENCY "|" D_JSON_HUMIDITY "|" D_JSON_ILLUMINANCE "|"
|
|
D_JSON_MOISTURE "|PB0.3|PB0.5|PB1|PB2.5|PB5|PB10|PM1|PM2.5|PM10|" D_JSON_POWERFACTOR "|" D_JSON_POWERUSAGE "|" D_JSON_TOTAL_START_TIME "|"
|
|
D_JSON_REACTIVE_POWERUSAGE "|" D_JSON_TODAY "|" D_JSON_TOTAL "|" D_JSON_VOLTAGE "|" D_JSON_WEIGHT "|" D_JSON_YESTERDAY "|"
|
|
D_JSON_CO2 "|" D_JSON_ECO2 "|" D_JSON_TVOC "|Red|Green|Blue|CCT|" D_PROXIMITY "|";
|
|
|
|
|
|
const char kHAssJsonSensorUnits[] PROGMEM =
|
|
"||||"
|
|
"VA|%|A|cm|Hz|%|lux|"
|
|
"%|ppd|ppd|ppd|ppd|ppd|ppd|µg/m³|µg/m³|µg/m³|Cos φ|W| |"
|
|
"VAr|kWh|kWh|V|kg|kWh|"
|
|
"ppm|ppm|ppb|R|G|B|" D_UNIT_KELVIN "| |";
|
|
|
|
const char kHAssJsonSensorDevCla[] PROGMEM =
|
|
"dev_cla\":\"temperature|dev_cla\":\"temperature|dev_cla\":\"pressure|dev_cla\":\"pressure|"
|
|
"dev_cla\":\"power|dev_cla\":\"battery|dev_cla\":\"current|ic\":\"mdi:leak|ic\":\"mdi:current-ac|dev_cla\":\"humidity|dev_cla\":\"illuminance|"
|
|
"ic\":\"mdi:cup-water|ic\":\"mdi:flask|ic\":\"mdi:flask|ic\":\"mdi:flask|ic\":\"mdi:flask|ic\":\"mdi:flask|ic\":\"mdi:flask|"
|
|
"dev_cla\":\"pm1|dev_cla\":\"pm25|dev_cla\":\"pm10|dev_cla\":\"power_factor|dev_cla\":\"power|ic\":\"mdi:progress-clock|"
|
|
"dev_cla\":\"power|dev_cla\":\"energy|dev_cla\":\"energy\",\"stat_cla\":\"total_increasing|dev_cla\":\"voltage|ic\":\"mdi:scale|dev_cla\":\"energy|"
|
|
"dev_cla\":\"carbon_dioxide|dev_cla\":\"carbon_dioxide|dev_class\":\"volatile_organic_compounds|"
|
|
"ic\":\"mdi:palette|ic\":\"mdi:palette|ic\":\"mdi:palette|ic\":\"mdi:temperature-kelvin|ic\":\"mdi:ruler|dev_cla\":\"illuminance|";
|
|
|
|
// List of sensors ready for discovery
|
|
|
|
const char HASS_DISCOVER_BASE[] PROGMEM =
|
|
"{\"name\":\"%s\"," // dualr2 1
|
|
"\"stat_t\":\"%s\""; // stat/dualr2/RESULT (implies "\"optimistic\":\"false\",")
|
|
|
|
const char HASS_DISCOVER_SENSOR[] PROGMEM =
|
|
",\"unit_of_meas\":\"%s\",\"%s\"," // unit of measure and class (or icon)
|
|
"\"frc_upd\":true," // force update for better graph representation
|
|
"\"val_tpl\":\"{{value_json['%s']['%s']"; // "COUNTER":{"C1":0} -> {{ value_json['COUNTER']['C1']
|
|
|
|
const char HASS_DISCOVER_SENSOR_LWT[] PROGMEM =
|
|
",\"avty_t\":\"%s\"," // tele/dualr2/LWT
|
|
"\"pl_avail\":\"" MQTT_LWT_ONLINE "\"," // Online
|
|
"\"pl_not_avail\":\"" MQTT_LWT_OFFLINE "\""; // Offline
|
|
|
|
const char HASS_DISCOVER_RELAY[] PROGMEM =
|
|
",\"cmd_t\":\"%s\"," // cmnd/dualr2/POWER2
|
|
"\"pl_off\":\"%s\"," // OFF
|
|
"\"pl_on\":\"%s\""; // ON
|
|
|
|
const char HASS_DISCOVER_RELAY_TEMPLATE[] PROGMEM =
|
|
",\"val_tpl\":\"{{value_json.%s}}\""; // POWER2
|
|
|
|
const char HASS_DISCOVER_BIN_SWITCH[] PROGMEM =
|
|
",\"val_tpl\":\"{{value_json.%s}}\"," // STATE
|
|
"\"frc_upd\":true," // In ON/OFF case, enable force_update to make automations work
|
|
"\"pl_on\":\"%s\"," // ON
|
|
"\"pl_off\":\"%s\""; // OFF
|
|
|
|
const char HASS_DISCOVER_BIN_PIR[] PROGMEM =
|
|
",\"val_tpl\":\"{{value_json.%s}}\"," // STATE
|
|
"\"frc_upd\":true," // In ON/OFF case, enable force_update to make automations work
|
|
"\"pl_on\":\"%s\"," // ON
|
|
"\"off_dly\":1"; // Switchmode13 and Switchmode14 doesn't transmit an OFF state.
|
|
|
|
const char HASS_DISCOVER_LIGHT_TEMPLATE[] PROGMEM =
|
|
",\"stat_val_tpl\":\"{{value_json.%s}}\""; // POWER2
|
|
|
|
const char HASS_DISCOVER_BASE_LIGHT[] PROGMEM =
|
|
",\"bri_cmd_t\":\"%s\"," // cmnd/led2/Dimmer
|
|
"\"bri_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"bri_scl\":100," // 100%
|
|
"\"on_cmd_type\":\"%s\"," // power on (first), power on (last), no power on (brightness)
|
|
"\"bri_val_tpl\":\"{{value_json.%s}}\"";
|
|
|
|
const char HASS_DISCOVER_LIGHT_HS_COLOR[] PROGMEM =
|
|
",\"hs_cmd_t\":\"%s\"," // cmnd/led2/HSBColor
|
|
"\"hs_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"hs_val_tpl\":\"{{value_json." D_CMND_HSBCOLOR ".split(',')[0:2]|join(',')}}\"";
|
|
|
|
const char HASS_DISCOVER_LIGHT_WHITE[] PROGMEM =
|
|
",\"whit_cmd_t\":\"%s\"," // cmnd/led2/White
|
|
"\"clrm_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"whit_scl\":100,"
|
|
"\"clrm_val_tpl\":\"{%%if value_json.White%%}white{%%else%%}hs{%%endif %%}\"";
|
|
|
|
const char HASS_DISCOVER_LIGHT_CT[] PROGMEM =
|
|
",\"clr_temp_cmd_t\":\"%s\"," // cmnd/led2/CT
|
|
"\"clr_temp_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"clr_temp_val_tpl\":\"{{value_json." D_CMND_COLORTEMPERATURE "}}\","
|
|
"\"clrm_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"clrm_val_tpl\":\"{%%if value_json.White%%}color_temp{%%else%%}hs{%%endif %%}\"";
|
|
|
|
const char HASS_DISCOVER_LIGHT_SCHEME[] PROGMEM =
|
|
",\"fx_cmd_t\":\"%s\"," // cmnd/led2/Scheme
|
|
"\"fx_stat_t\":\"%s\"," // stat/led2/RESULT
|
|
"\"fx_val_tpl\":\"{{value_json." D_CMND_SCHEME "}}\","
|
|
"\"fx_list\":[\"0\",\"1\",\"2\",\"3\",\"4\"]"; // string list with reference to scheme parameter.
|
|
|
|
const char HASS_DISCOVER_SHUTTER_BASE[] PROGMEM =
|
|
",\"cmd_t\":\"%s\"," // cmnd/%topic%/Backlog
|
|
"\"pl_open\":\"ShutterOpen%d\"," // 1
|
|
"\"pl_cls\":\"ShutterClose%d\"," // 1
|
|
"\"pl_stop\":\"ShutterStop%d\"," // 1
|
|
"\"opt\":false,"
|
|
"\"ret\":false,"
|
|
"\"qos\":1";
|
|
|
|
const char HASS_DISCOVER_SHUTTER_POS[] PROGMEM =
|
|
",\"pos_t\":\"%s%d\"," // stat/%topic%/SHUTTER1
|
|
"\"pos_clsd\":0,"
|
|
"\"pos_open\":100,"
|
|
"\"set_pos_t\":\"%s%d\""; // cmnd/%topic%/ShutterPosition1
|
|
|
|
const char HASS_DISCOVER_SHUTTER_TILT[] PROGMEM =
|
|
",\"tilt_cmd_t\":\"%s%d\"," // cmnd/%topic%/ShutterTilt1
|
|
"\"tilt_opnd_val\":%d,"
|
|
"\"tilt_clsd_val\":%d";
|
|
|
|
/*
|
|
"tilt_clsd_val": "tilt_closed_value",
|
|
"tilt_cmd_t": "tilt_command_topic",
|
|
"tilt_cmd_tpl": "tilt_command_template",
|
|
"tilt_inv_stat": "tilt_invert_state",
|
|
"tilt_max": "tilt_max",
|
|
"tilt_min": "tilt_min",
|
|
"tilt_opnd_val": "tilt_opened_value",
|
|
"tilt_opt": "tilt_optimistic",
|
|
"tilt_status_t": "tilt_status_topic",
|
|
"tilt_status_tpl": "tilt_status_template",
|
|
*/
|
|
|
|
const char HASS_DISCOVER_SENSOR_HASS_STATUS[] PROGMEM =
|
|
",\"json_attr_t\":\"%s\","
|
|
"\"unit_of_meas\":\"%%\","
|
|
"\"val_tpl\":\"{{value_json['" D_JSON_RSSI "']}}\","
|
|
"\"ic\":\"mdi:information-outline\"";
|
|
|
|
const char HASS_DISCOVER_DEVICE_INFO[] PROGMEM =
|
|
",\"uniq_id\":\"%s\","
|
|
"\"dev\":{\"ids\":[\"%06X\"],"
|
|
"\"name\":\"%s\","
|
|
"\"mdl\":\"%s\","
|
|
"\"sw\":\"%s%s\","
|
|
"\"mf\":\"Tasmota\"}";
|
|
|
|
const char HASS_DISCOVER_DEVICE_INFO_SHORT[] PROGMEM =
|
|
",\"uniq_id\":\"%s\","
|
|
"\"dev\":{\"ids\":[\"%06X\"]}";
|
|
|
|
const char HASS_TRIGGER_TYPE[] PROGMEM =
|
|
"{\"atype\":\"trigger\","
|
|
"\"t\":\"%sT\","
|
|
"\"pl\":\"{\\\"TRIG\\\":\\\"%s\\\"}\","
|
|
"\"type\":\"%s\","
|
|
"\"stype\":\"%s\","
|
|
"\"dev\":{\"ids\":[\"%06X\"]}}";
|
|
|
|
const char kHAssTriggerType[] PROGMEM =
|
|
"none|button_short_press|button_long_press|button_double_press";
|
|
|
|
const char kHAssTriggerTypeButtons[] PROGMEM =
|
|
"|button_short_press|button_double_press|button_triple_press|button_quadruple_press|button_quintuple_press|button_long_press|";
|
|
|
|
const char kHAssTriggerStringButtons[] PROGMEM =
|
|
"|SINGLE|DOUBLE|TRIPLE|QUAD|PENTA|HOLD|";
|
|
|
|
const char kHAssRelayType[] PROGMEM =
|
|
"|RL|LI|SHT|FAN";
|
|
|
|
const char kHAssError1[] PROGMEM =
|
|
"HASS: MQTT discovery failed due to too long topic or device/friendly name. Please shorten topic and/or device/friendly name. Failed to format";
|
|
|
|
const char kHAssError2[] PROGMEM =
|
|
"HASS: The configuration of the Relays is wrong, there is a Light that is using an index higher than the number of the validated relay.\n "
|
|
"The Relays have priority over the Lights, an incorrect order could lead to an erroneous Light control.\n "
|
|
"Please update your configuration to avoid inconsistent results.\n "
|
|
"Entities for Relays and Lights will not be available in Home Assistant until the configuration will be updated.";
|
|
|
|
const char kHAssError3[] PROGMEM =
|
|
"HASS: Unable to create one or more entities from Json data, please check your configuration. Failed to parse";
|
|
|
|
uint8_t hass_mode = 0;
|
|
int hass_tele_period = 0;
|
|
|
|
/*********************************************************************************************\
|
|
* New discovery direct copy of Tasmota discovery
|
|
*
|
|
* Supported by latest versions of Home Assistant (with hatasmota) and TasmoManager.
|
|
*
|
|
* SetOption19 0 - [DiscoverOff 0] [Discover 1] Enables discovery (default)
|
|
* SetOption19 1 - [DiscoverOff 1] [Discover 0] Disables discovery and removes retained message from MQTT server
|
|
* SetOption73 1 - [DiscoverButton] Enable discovery for buttons
|
|
* SetOption114 1 - [DiscoverSwitch] Enable discovery for switches
|
|
\*********************************************************************************************/
|
|
void HassDiscoverMessage(void) {
|
|
uint32_t ip_address = (uint32_t)WiFi.localIP();
|
|
char* hostname = TasmotaGlobal.hostname;
|
|
#if defined(ESP32) && CONFIG_IDF_TARGET_ESP32 && defined(USE_ETHERNET)
|
|
if (static_cast<uint32_t>(EthernetLocalIP()) != 0) {
|
|
ip_address = (uint32_t)EthernetLocalIP();
|
|
hostname = EthernetHostname();
|
|
}
|
|
#endif
|
|
Response_P(PSTR("{\"ip\":\"%_I\"," // IP Address
|
|
"\"dn\":\"%s\"," // Device Name
|
|
"\"fn\":["), // Friendly Names (start)
|
|
ip_address,
|
|
SettingsText(SET_DEVICENAME));
|
|
|
|
uint32_t maxfn = (TasmotaGlobal.devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : (!TasmotaGlobal.devices_present) ? 1 : TasmotaGlobal.devices_present;
|
|
for (uint32_t i = 0; i < MAX_FRIENDLYNAMES; i++) {
|
|
char fname[TOPSZ];
|
|
snprintf_P(fname, sizeof(fname), PSTR("\"%s\""), EscapeJSONString(SettingsText(SET_FRIENDLYNAME1 +i)).c_str());
|
|
ResponseAppend_P(PSTR("%s%s"), (i > 0 ? "," : ""), (i < maxfn) ? fname : PSTR("null"));
|
|
}
|
|
|
|
bool TuyaMod = false;
|
|
#ifdef USE_TUYA_MCU
|
|
TuyaMod = IsModuleTuya();
|
|
#endif
|
|
bool iFanMod = false;
|
|
#ifdef ESP8266
|
|
iFanMod = ((SONOFF_IFAN02 == TasmotaGlobal.module_type) || (SONOFF_IFAN03 == TasmotaGlobal.module_type));
|
|
#endif // ESP8266
|
|
|
|
ResponseAppend_P(PSTR("]," // Friendly Names (end)
|
|
"\"hn\":\"%s\"," // Host Name
|
|
"\"mac\":\"%s\"," // Full MAC as Device id
|
|
"\"md\":\"%s\"," // Module or Template Name
|
|
"\"ty\":%d,\"if\":%d," // Flag for TuyaMCU and Ifan devices
|
|
"\"ofln\":\"" MQTT_LWT_OFFLINE "\"," // Payload Offline
|
|
"\"onln\":\"" MQTT_LWT_ONLINE "\"," // Payload Online
|
|
"\"state\":[\"%s\",\"%s\",\"%s\",\"%s\"]," // State text for "OFF","ON","TOGGLE","HOLD"
|
|
"\"sw\":\"%s\"," // Software Version
|
|
"\"t\":\"%s\"," // Topic
|
|
"\"ft\":\"%s\"," // Full Topic
|
|
"\"tp\":[\"%s\",\"%s\",\"%s\"]," // Topics for command, stat and tele
|
|
"\"rl\":["), // Relays (start)
|
|
hostname,
|
|
NetworkUniqueId().c_str(),
|
|
ModuleName().c_str(),
|
|
TuyaMod, iFanMod,
|
|
GetStateText(0), GetStateText(1), GetStateText(2), GetStateText(3),
|
|
TasmotaGlobal.version,
|
|
TasmotaGlobal.mqtt_topic,
|
|
SettingsText(SET_MQTT_FULLTOPIC),
|
|
SettingsText(SET_MQTTPREFIX1),
|
|
SettingsText(SET_MQTTPREFIX2),
|
|
SettingsText(SET_MQTTPREFIX3));
|
|
|
|
uint8_t light_idx = MAX_RELAYS_SET + 1; // Will store the starting position of the lights
|
|
uint8_t light_subtype = 0;
|
|
bool light_controller_isCTRGBLinked = false;
|
|
#ifdef USE_LIGHT
|
|
light_subtype = Light.subtype;
|
|
if (light_subtype > LST_NONE) {
|
|
light_controller_isCTRGBLinked = light_controller.isCTRGBLinked();
|
|
if (!light_controller_isCTRGBLinked) { // One or two lights present
|
|
light_idx = TasmotaGlobal.devices_present - 2;
|
|
} else {
|
|
light_idx = TasmotaGlobal.devices_present - 1;
|
|
}
|
|
}
|
|
|
|
if ((Light.device > 0) && Settings->flag3.pwm_multi_channels) { // How many relays are light devices?
|
|
light_idx = TasmotaGlobal.devices_present - light_subtype;
|
|
}
|
|
#endif // USE_LIGHT
|
|
|
|
uint16_t Relay[MAX_RELAYS_SET] = { 0 }; // Base array to store the relay type
|
|
uint16_t Shutter[MAX_RELAYS_SET] = { 0 }; // Array to store a temp list for shutters
|
|
for (uint32_t i = 0; i < MAX_RELAYS_SET; i++) {
|
|
if (i < TasmotaGlobal.devices_present) {
|
|
|
|
#ifdef USE_SHUTTER
|
|
if (Settings->flag3.shutter_mode) {
|
|
for (uint32_t k = 0; k < TasmotaGlobal.shutters_present; k++) {
|
|
if (ShutterGetStartRelay(k) > 0) {
|
|
Shutter[ShutterGetStartRelay(k)-1] = Shutter[ShutterGetStartRelay(k)] = 1;
|
|
} else {
|
|
// terminate loop at first INVALID ShutterGetStartRelay(k).
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif // USE_SHUTTER
|
|
|
|
if (Shutter[i] != 0) { // Check if there are shutters present
|
|
Relay[i] = 3; // Relay is a shutter
|
|
} else {
|
|
if (i >= light_idx || (iFanMod && (0 == i))) { // First relay on Ifan controls the light
|
|
Relay[i] = 2; // Relay is a light
|
|
} else {
|
|
if (!iFanMod) { // Relays 2-4 for ifan are controlled by FANSPEED and don't need to be present if TasmotaGlobal.module_type = SONOFF_IFAN02 or SONOFF_IFAN03
|
|
Relay[i] = 1; // Simple Relay
|
|
}
|
|
}
|
|
}
|
|
}
|
|
ResponseAppend_P(PSTR("%s%d"), (i > 0 ? "," : ""), Relay[i]); // Vector for the Official Integration
|
|
}
|
|
|
|
ResponseAppend_P(PSTR("]," // Relays (end)
|
|
"\"swc\":[")); // Switch modes (start)
|
|
|
|
// Enable Discovery for Switches only if SetOption114 is enabled
|
|
for (uint32_t i = 0; i < MAX_SWITCHES_SET; i++) {
|
|
ResponseAppend_P(PSTR("%s%d"), (i > 0 ? "," : ""), (SwitchUsed(i) && Settings->flag5.mqtt_switches) ? Settings->switchmode[i] : -1);
|
|
}
|
|
|
|
ResponseAppend_P(PSTR("]," // Switch modes (end)
|
|
"\"swn\":[")); // Switch names (start)
|
|
|
|
// Enable Discovery for Switches only if SetOption114 is enabled
|
|
for (uint32_t i = 0; i < MAX_SWITCHES_SET; i++) {
|
|
char sname[TOPSZ];
|
|
snprintf_P(sname, sizeof(sname), PSTR("\"%s\""), GetSwitchText(i).c_str());
|
|
ResponseAppend_P(PSTR("%s%s"), (i > 0 ? "," : ""), (SwitchUsed(i) && Settings->flag5.mqtt_switches) ? sname : PSTR("null"));
|
|
}
|
|
|
|
ResponseAppend_P(PSTR("]," // Switch names (end)
|
|
"\"btn\":[")); // Button flag (start)
|
|
|
|
bool SerialButton = false;
|
|
// Enable Discovery for Buttons only if SetOption73 is enabled
|
|
for (uint32_t i = 0; i < MAX_KEYS_SET; i++) {
|
|
#ifdef ESP8266
|
|
SerialButton = ((0 == i) && (SONOFF_DUAL == TasmotaGlobal.module_type ));
|
|
#endif // ESP8266
|
|
ResponseAppend_P(PSTR("%s%d"), (i > 0 ? "," : ""), (SerialButton ? 1 : (ButtonUsed(i)) && Settings->flag3.mqtt_buttons));
|
|
}
|
|
|
|
ResponseAppend_P(PSTR("]," // Button flag (end)
|
|
"\"so\":{\"4\":%d," // SetOptions
|
|
"\"11\":%d,"
|
|
"\"13\":%d,"
|
|
"\"17\":%d,"
|
|
"\"20\":%d,"
|
|
"\"30\":%d,"
|
|
"\"68\":%d,"
|
|
"\"73\":%d,"
|
|
"\"82\":%d,"
|
|
"\"114\":%d,"
|
|
"\"117\":%d},"
|
|
"\"lk\":%d," // Light CTRGB linked
|
|
"\"lt_st\":%d," // Light SubType
|
|
"\"sho\":["), // Shutter Options (start)
|
|
Settings->flag.mqtt_response,
|
|
Settings->flag.button_swap,
|
|
Settings->flag.button_single,
|
|
Settings->flag.decimal_text,
|
|
Settings->flag.not_power_linked,
|
|
Settings->flag.hass_light,
|
|
Settings->flag3.pwm_multi_channels,
|
|
Settings->flag3.mqtt_buttons,
|
|
Settings->flag4.alexa_ct_range,
|
|
Settings->flag5.mqtt_switches,
|
|
Settings->flag5.fade_fixed_duration,
|
|
light_controller_isCTRGBLinked,
|
|
light_subtype);
|
|
|
|
for (uint32_t i = 0; i < tmin(TasmotaGlobal.shutters_present, MAX_SHUTTERS); i++) {
|
|
#ifdef USE_SHUTTER
|
|
ResponseAppend_P(PSTR("%s%d"), (i > 0 ? "," : ""), Settings->shutter_options[i]);
|
|
#else
|
|
ResponseAppend_P(PSTR("%s0"), (i > 0 ? "," : ""));
|
|
#endif // USE_SHUTTER
|
|
}
|
|
|
|
ResponseAppend_P(PSTR("]," // Shutter Options (end)
|
|
"\"sht\":[")); // Shutter Tilt (start)
|
|
for (uint32_t i = 0; i < tmax(TasmotaGlobal.shutters_present, MAX_SHUTTERS); i++) {
|
|
#ifdef USE_SHUTTER
|
|
ResponseAppend_P(PSTR("%s[%d,%d,%d]"), (i > 0 ? "," : ""),
|
|
ShutterGetTiltConfig(0,i),
|
|
ShutterGetTiltConfig(1,i),
|
|
ShutterGetTiltConfig(2,i));
|
|
#else
|
|
ResponseAppend_P(PSTR("%s[0,0,0]"), (i > 0 ? "," : ""));
|
|
#endif // USE_SHUTTER
|
|
}
|
|
ResponseAppend_P(PSTR("]," // Shutter Tilt (end)
|
|
"\"ver\":1}")); // Discovery version
|
|
}
|
|
|
|
void NewHAssDiscovery(void) {
|
|
TasmotaGlobal.masterlog_level = LOG_LEVEL_DEBUG_MORE; // Hide topic on clean and remove use weblog 4 to show it
|
|
|
|
ResponseClear(); // Clear retained message
|
|
if (!Settings->flag.hass_discovery) { // SetOption19 - Clear retained message
|
|
HassDiscoverMessage(); // Build discovery message
|
|
}
|
|
char stopic[TOPSZ];
|
|
snprintf_P(stopic, sizeof(stopic), PSTR("tasmota/discovery/%s/config"), NetworkUniqueId().c_str());
|
|
MqttPublish(stopic, true);
|
|
|
|
if (!Settings->flag.hass_discovery) { // SetOption19 - Clear retained message
|
|
Response_P(PSTR("{\"sn\":"));
|
|
MqttShowSensor(true);
|
|
ResponseAppend_P(PSTR(",\"ver\":1}"));
|
|
}
|
|
snprintf_P(stopic, sizeof(stopic), PSTR("tasmota/discovery/%s/sensors"), NetworkUniqueId().c_str());
|
|
MqttPublish(stopic, true);
|
|
|
|
TasmotaGlobal.masterlog_level = LOG_LEVEL_NONE; // Restore WebLog state
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Legacy discovery
|
|
\*********************************************************************************************/
|
|
|
|
void TryResponseAppend_P(const char *format, ...) {
|
|
#ifdef MQTT_DATA_STRING
|
|
va_list arg;
|
|
va_start(arg, format);
|
|
char* mqtt_data = ext_vsnprintf_malloc_P(format, arg);
|
|
va_end(arg);
|
|
if (mqtt_data != nullptr) {
|
|
TasmotaGlobal.mqtt_data += mqtt_data;
|
|
free(mqtt_data);
|
|
}
|
|
#else
|
|
va_list args;
|
|
va_start(args, format);
|
|
char dummy[2];
|
|
int dlen = vsnprintf_P(dummy, 1, format, args);
|
|
|
|
int mlen = ResponseLength();
|
|
int slen = ResponseSize() - 1 - mlen;
|
|
if (dlen >= slen)
|
|
{
|
|
AddLog(LOG_LEVEL_ERROR, PSTR("%s (%u/%u):"), kHAssError1, dlen, slen);
|
|
va_start(args, format);
|
|
char log_data[MAX_LOGSZ];
|
|
vsnprintf_P(log_data, sizeof(log_data), format, args);
|
|
AddLogData(LOG_LEVEL_ERROR, log_data);
|
|
}
|
|
else
|
|
{
|
|
va_start(args, format);
|
|
vsnprintf_P(TasmotaGlobal.mqtt_data + mlen, slen, format, args);
|
|
}
|
|
va_end(args);
|
|
#endif
|
|
}
|
|
|
|
void HAssAnnounceRelayLight(void)
|
|
{
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char stemp3[TOPSZ];
|
|
char unique_id[30];
|
|
|
|
#ifdef USE_LIGHT
|
|
bool LightControl = light_controller.isCTRGBLinked(); // SetOption37 - Color remapping for led channels, also provides an option for allowing independent handling of RGB and white channels
|
|
#endif //USE_LIGHT
|
|
bool PwmMulti = Settings->flag3.pwm_multi_channels; // SetOption68 - Multi-channel PWM instead of a single light
|
|
bool is_topic_light = false; // Switch HAss domain between Lights and Relays
|
|
bool ind_light = false; // Controls Separated Lights when SetOption37 is >= 128
|
|
bool ct_light = false; // Controls a CT Light when SetOption37 is >= 128
|
|
bool err_flag = false; // When true it blocks the creation of entities if the order of the Relays is not correct to avoid issue with Lights
|
|
bool TuyaMod = false; // Controls Tuya MCU modules
|
|
bool PwmMod = false; // Controls PWM_DIMMER module
|
|
bool FanMod = false; // Controls SONOFF_IFAN0X modules
|
|
uint8_t ShowTopic; // Used to hide/unhide a topic during Discovery to spare some cpu load
|
|
|
|
uint8_t dimmer = 1;
|
|
uint8_t valid_relay = 0;
|
|
uint8_t max_lights = 1;
|
|
uint8_t TuyaRel = 0;
|
|
uint8_t TuyaRelInv = 0;
|
|
uint8_t TuyaDim = 0;
|
|
power_t shutter_mask = 0;
|
|
|
|
#ifdef ESP8266
|
|
PwmMod = (PWM_DIMMER == TasmotaGlobal.module_type);
|
|
FanMod = (SONOFF_IFAN02 == TasmotaGlobal.module_type || SONOFF_IFAN03 == TasmotaGlobal.module_type);
|
|
if (SONOFF_DUAL == TasmotaGlobal.module_type) { valid_relay = 2; }
|
|
#endif //ESP8266
|
|
#ifdef USE_TUYA_MCU
|
|
TuyaMod = IsModuleTuya();
|
|
#endif
|
|
|
|
#ifdef USE_LIGHT
|
|
// If there is a special Light to be enabled and managed with SetOption68 or SetOption37 >= 128, Discovery calculates the maximum number of entities to be generated in advance
|
|
if (PwmMulti) { max_lights = Light.subtype; }
|
|
|
|
if (!LightControl) {
|
|
ind_light = true;
|
|
if (!PwmMulti) { max_lights = 2;}
|
|
}
|
|
#endif //USE_LIGHT
|
|
|
|
#ifdef USE_SHUTTER
|
|
if (Settings->flag3.shutter_mode) {
|
|
for (uint32_t i = 0; i < TasmotaGlobal.shutters_present; i++) {
|
|
uint8_t sr = ShutterGetStartRelay(i);
|
|
if (sr > 0) {
|
|
bitSet(shutter_mask, sr-1);
|
|
bitSet(shutter_mask, sr);
|
|
} else {
|
|
// terminate loop at first INVALID Settings->shutter_startrelay[i].
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
for (uint32_t i = 1; i <= MAX_RELAYS; i++)
|
|
{
|
|
|
|
#ifdef USE_TUYA_MCU
|
|
TuyaRel = TuyaGetDpId((TUYA_MCU_FUNC_REL1+ i-1) + TasmotaGlobal.active_device - 1);
|
|
TuyaRelInv = TuyaGetDpId((TUYA_MCU_FUNC_REL1_INV+ i-1) + TasmotaGlobal.active_device - 1);
|
|
TuyaDim = TuyaGetDpId((TUYA_MCU_FUNC_DIMMER) + TasmotaGlobal.active_device - 1);
|
|
#endif //USE_TUYA_MCU
|
|
|
|
TasmotaGlobal.masterlog_level = ShowTopic = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
|
|
bool RelayX = PinUsed(GPIO_REL1, i-1) || (valid_relay >= i) || (TuyaRel > 0 && TuyaMod) || (TuyaRelInv > 0 && TuyaMod); // Check if the gpio is configured as Relay or force it for Sonoff DUAL R1 with MCU and Tuya MCU
|
|
#ifdef USE_MCP230xx_OUTPUT
|
|
if (i <= TasmotaGlobal.devices_present){
|
|
RelayX = true;
|
|
}
|
|
#endif //USE_MCP230xx_OUTPUT
|
|
is_topic_light = Settings->flag.hass_light && RelayX || TasmotaGlobal.light_type && !RelayX || PwmMod || (TuyaDim > 0 && TuyaMod); // SetOption30 - Enforce HAss autodiscovery as light
|
|
ResponseClear(); // Clear retained message
|
|
|
|
// Clear "other" topic first in case the device has been reconfigured from light to switch or vice versa
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_%s_%d"), ESP_getChipId(), (is_topic_light) ? "RL" : "LI", i);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/%s/%s/config"),
|
|
(is_topic_light) ? "switch" : "light", unique_id);
|
|
MqttPublish(stopic, true);
|
|
// Clear or Set topic
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_%s_%d"), ESP_getChipId(), (is_topic_light) ? "LI" : "RL", i);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/%s/%s/config"),
|
|
(is_topic_light) ? "light" : "switch", unique_id);
|
|
|
|
if (bitRead(shutter_mask, i-1)) {
|
|
// suppress shutter relays
|
|
#ifdef USE_LIGHT
|
|
} else if ((i < Light.device) && !RelayX) {
|
|
err_flag = true;
|
|
AddLog(LOG_LEVEL_ERROR, PSTR("%s"), kHAssError2);
|
|
} else {
|
|
if (Settings->flag.hass_discovery && (RelayX || (Light.device > 0) && (max_lights > 0)) && !err_flag )
|
|
#else
|
|
} else {
|
|
if (Settings->flag.hass_discovery && RelayX )
|
|
#endif //USE_LIGHT
|
|
{ // SetOption19 - Control Home Assistant automatic discovery (See SetOption59)
|
|
char name[TOPSZ]; // friendlyname(33) + " " + index
|
|
char value_template[33];
|
|
char prefix[TOPSZ];
|
|
char *command_topic = stemp1;
|
|
char *state_topic = stemp2;
|
|
char *availability_topic = stemp3;
|
|
|
|
ShowTopic = 0;
|
|
|
|
if (i > MAX_FRIENDLYNAMES) {
|
|
snprintf_P(name, sizeof(name), PSTR("%s %d"), SettingsText(SET_FRIENDLYNAME1), i-1);
|
|
} else {
|
|
snprintf_P(name, sizeof(name), PSTR ("%s"), SettingsText(SET_FRIENDLYNAME1 + i-1));
|
|
}
|
|
|
|
GetPowerDevice(value_template, i, sizeof(value_template), Settings->flag.device_index_enable); // SetOption26 - Switch between POWER or POWER1
|
|
GetTopic_P(command_topic, CMND, TasmotaGlobal.mqtt_topic, value_template);
|
|
GetTopic_P(state_topic, TELE, TasmotaGlobal.mqtt_topic, D_RSLT_STATE);
|
|
GetTopic_P(availability_topic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
Response_P(HASS_DISCOVER_BASE, name, state_topic);
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
TryResponseAppend_P(HASS_DISCOVER_RELAY, command_topic, SettingsText(SET_STATE_TXT1), SettingsText(SET_STATE_TXT2));
|
|
if (is_topic_light) {
|
|
TryResponseAppend_P(HASS_DISCOVER_LIGHT_TEMPLATE, value_template);
|
|
} else {
|
|
TryResponseAppend_P(HASS_DISCOVER_RELAY_TEMPLATE, value_template);
|
|
}
|
|
TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO_SHORT, unique_id, ESP_getChipId());
|
|
|
|
#ifdef USE_LIGHT
|
|
if (i >= Light.device) {
|
|
if (!RelayX || PwmMod || (TuyaDim > 0 && TuyaMod)) {
|
|
char *brightness_command_topic = stemp1;
|
|
strncpy_P(stemp3, Settings->flag.not_power_linked ? PSTR("last") : PSTR("brightness"), sizeof(stemp3)); // SetOption20 - Control power in relation to Dimmer/Color/Ct changes
|
|
char channel_num[9];
|
|
if (PwmMulti) { // SetOption68 - Multi-channel PWM instead of a single light
|
|
snprintf_P(channel_num, sizeof(channel_num), PSTR("Channel%d"), i);
|
|
} else {
|
|
if (!LightControl) { // SetOption37 >= 128 - Color remapping for led channels, also provides an option for allowing independent handling of RGB and white channels
|
|
snprintf_P(channel_num, sizeof(channel_num), PSTR("" D_CMND_DIMMER "%d"), dimmer);
|
|
dimmer ++;
|
|
} else {
|
|
snprintf_P(channel_num, sizeof(channel_num), PSTR("" D_CMND_DIMMER ""));
|
|
}
|
|
}
|
|
GetTopic_P(brightness_command_topic, CMND, TasmotaGlobal.mqtt_topic, channel_num);
|
|
TryResponseAppend_P(HASS_DISCOVER_BASE_LIGHT, brightness_command_topic, state_topic, stemp3, channel_num);
|
|
}
|
|
if ((ind_light && !PwmMulti) || LightControl) {
|
|
|
|
if (Light.subtype >= LST_RGB) {
|
|
char *clr_command_topic = stemp1;
|
|
|
|
GetTopic_P(clr_command_topic, CMND, TasmotaGlobal.mqtt_topic, D_CMND_HSBCOLOR);
|
|
TryResponseAppend_P(HASS_DISCOVER_LIGHT_HS_COLOR, clr_command_topic, state_topic);
|
|
|
|
char *effect_command_topic = stemp1;
|
|
GetTopic_P(effect_command_topic, CMND, TasmotaGlobal.mqtt_topic, D_CMND_SCHEME);
|
|
TryResponseAppend_P(HASS_DISCOVER_LIGHT_SCHEME, effect_command_topic, state_topic);
|
|
}
|
|
if (LST_RGBCW == Light.subtype) { ct_light = true; }
|
|
}
|
|
|
|
if ((!ind_light && ct_light) || (LST_COLDWARM == Light.subtype &&
|
|
!PwmMulti && LightControl)) {
|
|
char *color_temp_command_topic = stemp1;
|
|
|
|
GetTopic_P(color_temp_command_topic, CMND, TasmotaGlobal.mqtt_topic, D_CMND_COLORTEMPERATURE);
|
|
TryResponseAppend_P(HASS_DISCOVER_LIGHT_CT, color_temp_command_topic, state_topic, state_topic);
|
|
ct_light = false;
|
|
}
|
|
if (LST_RGBW == Light.subtype && !PwmMulti && LightControl) {
|
|
char *white_temp_command_topic = stemp1;
|
|
|
|
GetTopic_P(white_temp_command_topic, CMND, TasmotaGlobal.mqtt_topic, D_CMND_WHITE);
|
|
TryResponseAppend_P(HASS_DISCOVER_LIGHT_WHITE, white_temp_command_topic, state_topic);
|
|
}
|
|
ind_light = false;
|
|
max_lights--;
|
|
}
|
|
#endif // USE_LIGHT
|
|
TryResponseAppend_P(PSTR("}"));
|
|
}
|
|
}
|
|
TasmotaGlobal.masterlog_level = ShowTopic;
|
|
MqttPublish(stopic, true);
|
|
}
|
|
}
|
|
|
|
void HAssAnnouncerTriggers(uint8_t device, uint8_t present, uint8_t key, uint8_t toggle, uint8_t hold, uint8_t single, uint8_t trg_start, uint8_t trg_end)
|
|
{
|
|
// key 0 = button
|
|
// key 1 = switch
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char unique_id[30];
|
|
char trigger2[8];
|
|
uint8_t ShowTopic; // Used to hide/unhide a topic during Discovery to spare some cpu load
|
|
ResponseClear(); // Clear retained message
|
|
|
|
for (uint8_t i = trg_start; i <= trg_end; i++) {
|
|
GetTextIndexed(trigger2, sizeof(trigger2), i, kHAssTriggerStringButtons);
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_%s_%d_%s"), ESP_getChipId(), key ? "SW" : "BTN", device + 1, key ? GetStateText(i) : trigger2);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/device_automation/%s/config"), unique_id);
|
|
|
|
TasmotaGlobal.masterlog_level = ShowTopic = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
|
|
if (Settings->flag.hass_discovery && present) { // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
char name[TOPSZ]; // friendlyname(33) + " " + "BTN" + " " + index
|
|
char value_template[33];
|
|
char prefix[TOPSZ];
|
|
char *state_topic = stemp1;
|
|
char *availability_topic = stemp2;
|
|
char jsoname[8];
|
|
ShowTopic = 0; // Show the new generated topic
|
|
|
|
GetPowerDevice(value_template, device + 1, sizeof(value_template), key + Settings->flag.device_index_enable); // Force index for Switch 1, Index on Button1 is controlled by SetOption26 - Switch between POWER or POWER1
|
|
snprintf_P(jsoname, sizeof(jsoname), PSTR("%s%d"), key ? "SWITCH" : "BUTTON", device + 1);
|
|
GetTopic_P(state_topic, STAT, TasmotaGlobal.mqtt_topic, jsoname);
|
|
GetTopic_P(availability_topic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
|
|
char param[21];
|
|
char subtype[9];
|
|
uint8_t pload = toggle;
|
|
if (key) {
|
|
if ((i == 2 && toggle != 0) || (i == 3 && hold != 0)) {
|
|
if (i == 3) { pload = hold; }
|
|
GetTextIndexed(param, sizeof(param), pload, kHAssTriggerType);
|
|
snprintf_P(subtype, sizeof(subtype), PSTR("switch_%d"), device + 1);
|
|
Response_P(HASS_TRIGGER_TYPE, state_topic, GetStateText(i), param, subtype, ESP_getChipId());
|
|
} else { ResponseClear(); } // Need to be cleaned again to avoid duplicate
|
|
} else {
|
|
char trigger1[24];
|
|
GetTextIndexed(trigger1, sizeof(trigger1), i, kHAssTriggerTypeButtons);
|
|
snprintf_P(subtype, sizeof(subtype), PSTR("button_%d"), device + 1);
|
|
if (i > 1 && single) {
|
|
ResponseClear(); // Need to be cleaned again to avoid duplicate
|
|
} else {
|
|
Response_P(HASS_TRIGGER_TYPE, state_topic, trigger2, trigger1, subtype, ESP_getChipId());
|
|
}
|
|
}
|
|
}
|
|
TasmotaGlobal.masterlog_level = ShowTopic;
|
|
MqttPublish(stopic, true);
|
|
}
|
|
}
|
|
|
|
void HAssAnnouncerBinSensors(uint8_t device, uint8_t present, uint8_t dual, uint8_t toggle, uint8_t pir)
|
|
{
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char unique_id[30];
|
|
uint8_t ShowTopic; // Used to hide/unhide a topic during Discovery to spare some cpu load
|
|
|
|
ResponseClear(); // Clear retained message
|
|
TasmotaGlobal.masterlog_level = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
|
|
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_SW_%d"), ESP_getChipId(), device + 1);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/binary_sensor/%s/config"), unique_id);
|
|
|
|
TasmotaGlobal.masterlog_level = ShowTopic = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
|
|
if (Settings->flag.hass_discovery && present ) { // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
if (!toggle || dual) {
|
|
char name[TOPSZ]; // friendlyname(33) + " " + "BTN" + " " + index
|
|
char value_template[33];
|
|
char prefix[TOPSZ];
|
|
char *state_topic = stemp1;
|
|
char *availability_topic = stemp2;
|
|
char jsoname[8];
|
|
|
|
ShowTopic = 0;
|
|
|
|
GetPowerDevice(value_template, device + 1, sizeof(value_template), 1 + Settings->flag.device_index_enable); // Force index for Switch 1, Index on Button1 is controlled by SetOption26 - Switch between POWER or POWER1
|
|
snprintf_P(jsoname, sizeof(jsoname), PSTR("SWITCH%d"), device + 1);
|
|
GetTopic_P(state_topic, STAT, TasmotaGlobal.mqtt_topic, jsoname);
|
|
GetTopic_P(availability_topic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
|
|
snprintf_P(name, sizeof(name), PSTR("%s Switch%d"), SettingsText(SET_DEVICENAME), device + 1);
|
|
Response_P(HASS_DISCOVER_BASE, name, state_topic, availability_topic);
|
|
if (!pir) {
|
|
TryResponseAppend_P(HASS_DISCOVER_BIN_SWITCH, PSTR(D_RSLT_STATE), SettingsText(SET_STATE_TXT2), SettingsText(SET_STATE_TXT1));
|
|
} else {
|
|
TryResponseAppend_P(HASS_DISCOVER_BIN_PIR, PSTR(D_RSLT_STATE), SettingsText(SET_STATE_TXT2));
|
|
}
|
|
TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO_SHORT, unique_id, ESP_getChipId());
|
|
#ifdef DEEPSLEEP_LWT_HA_DISCOVERY
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
#else
|
|
if (Settings->deepsleep == 0)
|
|
{
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
}
|
|
#endif //DEEPSLEEP_LWT_HA_DISCOVERY
|
|
TryResponseAppend_P(PSTR("}"));
|
|
}
|
|
}
|
|
TasmotaGlobal.masterlog_level = ShowTopic;
|
|
MqttPublish(stopic, true);
|
|
|
|
}
|
|
|
|
void HAssAnnounceSwitches(void)
|
|
{
|
|
for (uint32_t switch_index = 0; switch_index < MAX_SWITCHES_SET; switch_index++)
|
|
{
|
|
uint8_t switch_present = 0;
|
|
uint8_t dual = 0;
|
|
uint8_t toggle = 1;
|
|
uint8_t hold = 0;
|
|
uint8_t pir = 0;
|
|
|
|
if (SwitchUsed(switch_index)) { switch_present = 1; }
|
|
|
|
if (KeyTopicActive(1) && strcmp(SettingsText(SET_MQTT_SWITCH_TOPIC), TasmotaGlobal.mqtt_topic)) // Enable Discovery for Switches only if SwitchTopic is set to a custom name
|
|
{
|
|
|
|
// switch matrix for triggers and binary sensor generation when switchtopic is set as custom (default index is 0,0 - TOGGLE, TOGGLE):
|
|
// SWITCHMODE INTERNAL BINARY PRESS DOUBLE PRESS HOLD T,H
|
|
// 0 TOGGLE NO TOGGLE (button_short_press) NONE NONE 1,0
|
|
// 1 FOLLOW YES NONE NONE NONE 0,0
|
|
// 2 FOLLOW_INV YES NONE NONE NONE 0,0
|
|
// 3 PUSHBUTTON YES TOGGLE (button_short_press) NONE NONE 1,0
|
|
// 4 PUSHBUTTON_INV YES TOGGLE (button_short_press) NONE NONE 1,0
|
|
// 5 PUSHBUTTONHOLD YES TOGGLE (button_short_press) NONE HOLD (button_long_press) 1,2
|
|
// 6 PUSHBUTTONHOLD_INV YES TOGGLE (button_short_press) NONE HOLD (button_long_press) 1,2
|
|
// 7 PUSHBUTTON_TOGGLE NO TOGGLE (button_short_press) NONE NONE 1,0
|
|
// 8 TOGGLEMULTI NO TOGGLE (button_short_press) HOLD (button_double_press) NONE 1,3
|
|
// 9 FOLLOWMULTI YES NONE HOLD (button_double_press) NONE 0,3
|
|
// 10 FOLLOWMULTI_INV YES NONE HOLD (button_double_press) NONE 0,3
|
|
// 11 PUSHHOLDMULTI NO TOGGLE (button_short_press) NONE INC_DEC (button_long_press) 1,0
|
|
// INV (not available) CLEAR (not available)
|
|
// 12 PUSHHOLDMULTI_INV NO TOGGLE (button_short_press) NONE CLEAR (button_long_press) 1,0
|
|
// INV (not available) INC_DEC (not available)
|
|
// 13 PUSHON YES NONE NONE NONE 0,0
|
|
// 14 PUSHON_INV YES NONE NONE NONE 0,0
|
|
// Please note: SwitchMode11 and 12 will register just TOGGLE (button_short_press)
|
|
|
|
// Trigger types: "0 = none | 1 = button_short_press | 2 = button_long_press | 3 = button_double_press";
|
|
|
|
uint8_t swmode = Settings->switchmode[switch_index];
|
|
|
|
switch (swmode) {
|
|
case FOLLOW:
|
|
case FOLLOW_INV:
|
|
toggle = 0; // Binary sensor and no triggers
|
|
break;
|
|
case PUSHBUTTON:
|
|
case PUSHBUTTON_INV:
|
|
dual = 1; // Binary sensor and TOGGLE (button_short_press) trigger
|
|
break;
|
|
case PUSHBUTTONHOLD:
|
|
case PUSHBUTTONHOLD_INV:
|
|
dual = 1; // Binary sensor, TOGGLE (button_short_press) and HOLD (button_long_press) triggers
|
|
hold = 2;
|
|
break;
|
|
case TOGGLEMULTI:
|
|
hold = 3; // TOGGLE (button_short_press) and HOLD (button_double_press) triggers
|
|
break;
|
|
case FOLLOWMULTI:
|
|
case FOLLOWMULTI_INV:
|
|
dual = 1; // Binary sensor and HOLD (button_long_press) trigger
|
|
toggle = 0;
|
|
hold = 3;
|
|
break;
|
|
case PUSHON:
|
|
case PUSHON_INV:
|
|
toggle = 0;
|
|
pir = 1; // Binary sensor with only ON state and automatic OFF after 1 second
|
|
}
|
|
|
|
} else { switch_present = 0;}
|
|
|
|
HAssAnnouncerTriggers(switch_index, switch_present, 1, toggle, hold, 0, 2, 3);
|
|
HAssAnnouncerBinSensors(switch_index, switch_present, dual, toggle, pir);
|
|
}
|
|
}
|
|
|
|
void HAssAnnounceButtons(void)
|
|
{
|
|
for (uint32_t button_index = 0; button_index < MAX_KEYS_SET; button_index++)
|
|
{
|
|
uint8_t button_present = 0;
|
|
uint8_t single = 0;
|
|
|
|
#ifdef ESP8266
|
|
if (!button_index && ((SONOFF_DUAL == TasmotaGlobal.module_type) || (CH4 == TasmotaGlobal.module_type)))
|
|
{
|
|
button_present = 1;
|
|
} else
|
|
#endif // ESP8266
|
|
{
|
|
if (ButtonUsed(button_index)) {
|
|
button_present = 1;
|
|
}
|
|
}
|
|
|
|
// Button matrix for triggers generation when SetOption73 is enabled:
|
|
// N SetOption1 SetOption11 SetOption13 PRESS MULTI PRESS HOLD
|
|
// 1 0 0 0 SINGLE (10 - button_short_press) DOUBLE to PENTA YES (button_long_press)
|
|
// 2 1 0 0 SINGLE (10 - button_short_press) DOUBLE to PENTA YES (button_long_press)
|
|
// 3 0 1 0 DOUBLE (11 - button_short_press) SINGLE then TRIPLE TO PENTA YES (button_long_press)
|
|
// 4 1 1 0 DOUBLE (11 - button_short_press) SINGLE then TRIPLE TO PENTA YES (button_long_press)
|
|
// 5 0 0 1 SINGLE (10 - button_short_press) NONE NONE
|
|
// 6 1 0 1 SINGLE (10 - button_short_press) NONE NONE
|
|
// 7 0 1 1 SINGLE (10 - button_short_press) NONE NONE
|
|
// 8 1 1 1 SINGLE (10 - button_short_press) NONE NONE
|
|
|
|
// Trigger types: 10 = button_short_press | 11 = button_double_press | 12 = button_triple_press | 13 = button_quadruple_press | 14 = button_quintuple_press | 3 = button_long_press
|
|
|
|
if (!Settings->flag3.mqtt_buttons) { // Enable Buttons for discovery [SetOption73] - Decouple button from relay and send just mqtt topic
|
|
button_present = 0;
|
|
} else {
|
|
if (Settings->flag.button_single) { // [SetOption13] Immediate action on button press, just SINGLE trigger
|
|
single = 1;
|
|
}
|
|
}
|
|
HAssAnnouncerTriggers(button_index, button_present, 0, 0, 0, single, 1, 6);
|
|
}
|
|
}
|
|
|
|
void HAssAnnounceSensor(const char *sensorname, const char *subsensortype, const char *MultiSubName, uint8_t subqty, bool nested, const char* SubKey)
|
|
{
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char unique_id[30];
|
|
char subname[20];
|
|
|
|
ResponseClear(); // Clear retained message
|
|
|
|
// Clear or Set topic
|
|
NoAlNumToUnderscore(subname, MultiSubName); //Replace all non alphaumeric characters to '_' to avoid topic name issues
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_%s_%s"), ESP_getChipId(), sensorname, subname);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/sensor/%s/config"), unique_id);
|
|
if (Settings->flag.hass_discovery)
|
|
{ // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
char name[TOPSZ]; // friendlyname(33) + " " + sensorname(20?) + " " + sensortype(20?)
|
|
char prefix[TOPSZ];
|
|
char *state_topic = stemp1;
|
|
char *availability_topic = stemp2;
|
|
TasmotaGlobal.masterlog_level = 0; // Show the new generated topic
|
|
|
|
GetTopic_P(state_topic, TELE, TasmotaGlobal.mqtt_topic, PSTR(D_RSLT_SENSOR));
|
|
snprintf_P(name, sizeof(name), PSTR("%s %s %s"), SettingsText(SET_DEVICENAME), sensorname, MultiSubName);
|
|
GetTopic_P(availability_topic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
|
|
Response_P(HASS_DISCOVER_BASE, name, state_topic);
|
|
#ifdef DEEPSLEEP_LWT_HA_DISCOVERY
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
#else
|
|
if (Settings->deepsleep == 0)
|
|
{
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
}
|
|
#endif //DEEPSLEEP_LWT_HA_DISCOVERY
|
|
TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO_SHORT, unique_id, ESP_getChipId());
|
|
|
|
|
|
char jname[32];
|
|
int sensor_index = GetCommandCode(jname, sizeof(jname), SubKey, kHAssJsonSensorTypes);
|
|
if (sensor_index > -1) {
|
|
|
|
char param1[20];
|
|
GetTextIndexed(param1, sizeof(param1), sensor_index, kHAssJsonSensorUnits);
|
|
switch (sensor_index) {
|
|
case 0: // Temperature and DewPoint
|
|
case 1:
|
|
snprintf_P(param1, sizeof(param1), PSTR("°%c"),TempUnit()); // C or F
|
|
break;
|
|
case 2: // Pressure and Sea Level Pressure
|
|
case 3:
|
|
snprintf_P(param1, sizeof(param1), PSTR("%s"), PressureUnit().c_str());
|
|
break;
|
|
}
|
|
char param2[50];
|
|
GetTextIndexed(param2, sizeof(param2), sensor_index, kHAssJsonSensorDevCla);
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR, param1, param2, sensorname, subsensortype);
|
|
|
|
} else {
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR, " ", "ic\":\"mdi:eye", sensorname, subsensortype);
|
|
}
|
|
|
|
if (nested) { TryResponseAppend_P(PSTR("['%s']"), SubKey); }
|
|
|
|
if (subqty != 0) { TryResponseAppend_P(PSTR("[%d]"), subqty -1); }
|
|
|
|
TryResponseAppend_P(PSTR("}}\"}"));
|
|
}
|
|
MqttPublish(stopic, true);
|
|
}
|
|
|
|
void HAssAnnounceSensors(void)
|
|
{
|
|
uint8_t hass_xsns_index = 0;
|
|
do
|
|
{
|
|
ResponseClear();
|
|
int tele_period_save = TasmotaGlobal.tele_period;
|
|
TasmotaGlobal.tele_period = 2; // Do not allow HA updates during next function call
|
|
XsnsNextCall(FUNC_JSON_APPEND, hass_xsns_index); // ,"INA219":{"Voltage":4.494,"Current":0.020,"Power":0.089}
|
|
TasmotaGlobal.tele_period = tele_period_save;
|
|
size_t sensordata_len = ResponseLength();
|
|
char sensordata[sensordata_len+2]; // dynamically adjust the size
|
|
strcpy(sensordata, ResponseData()); // we can use strcpy since the buffer has the right size
|
|
|
|
// ******************* JSON TEST *******************
|
|
// char sensordata[512];
|
|
// snprintf_P(sensordata, sizeof(sensordata), PSTR("{\"ENERGY\":{\"TotalStartTime\":\"2018-11-23T15:33:47\",\"ExportTariff\":[0.000,0.017],\"Speed\":{\"Act\":\"NE\"}}}"));
|
|
// size_t sensordata_len = strlen(sensordata);
|
|
// ******************* JSON TEST *******************
|
|
|
|
if (sensordata_len > 0)
|
|
{
|
|
// // We replace the leader ',' with '{'
|
|
sensordata[0] = '{';
|
|
// // and we add a trailing '}' after the last '}'
|
|
sensordata[sensordata_len] = '}';
|
|
sensordata[sensordata_len+1] = '\0';
|
|
|
|
JsonParser parser(sensordata);
|
|
JsonParserObject root = parser.getRootObject();
|
|
if (!root)
|
|
{
|
|
AddLog(LOG_LEVEL_ERROR, PSTR("%s '%s' (ERR1)"), kHAssError3, sensordata);
|
|
continue;
|
|
}
|
|
for (auto sensor_key : root)
|
|
{
|
|
// sensor is of type JsonParserKey
|
|
const char *sensorname = sensor_key.getStr();
|
|
JsonParserObject sensors = sensor_key.getValue().getObject();
|
|
|
|
if (!sensors)
|
|
{
|
|
AddLog(LOG_LEVEL_ERROR, PSTR("%s '%s' (ERR2)"), kHAssError3, sensorname);
|
|
continue;
|
|
}
|
|
|
|
for (auto subsensor_key_token : sensors)
|
|
{
|
|
const char * subsensor_key = subsensor_key_token.getStr();
|
|
JsonParserToken subsensor = subsensor_key_token.getValue();
|
|
if (subsensor.isObject()) {
|
|
// If there is a nested json on sensor data, second level entitites will be created
|
|
JsonParserObject subsensors = subsensor.getObject();
|
|
char NewSensorName[20];
|
|
for (auto subsensor2_key : subsensors) {
|
|
snprintf_P(NewSensorName, sizeof(NewSensorName), PSTR("%s %s"), subsensor_key, subsensor2_key.getStr());
|
|
HAssAnnounceSensor(sensorname, subsensor_key, NewSensorName, 0, 1, subsensor2_key.getStr());
|
|
}
|
|
} else if (subsensor.isArray()) {
|
|
// If there is more than a value on sensor data, 'n' entitites will be created
|
|
JsonParserArray subsensors = subsensor.getArray();
|
|
uint8_t subqty = subsensors.size();
|
|
char MultiSubName[20];
|
|
for (int i = 1; i <= subqty; i++) {
|
|
snprintf_P(MultiSubName, sizeof(MultiSubName), PSTR("%s %d"), subsensor_key, i);
|
|
HAssAnnounceSensor(sensorname, subsensor_key, MultiSubName, i, 0, subsensor_key);
|
|
}
|
|
} else {
|
|
HAssAnnounceSensor(sensorname, subsensor_key, subsensor_key, 0, 0, subsensor_key);}
|
|
}
|
|
}
|
|
}
|
|
yield();
|
|
} while (hass_xsns_index != 0);
|
|
}
|
|
|
|
void HAssAnnounceShutters(void)
|
|
{
|
|
#ifdef USE_SHUTTER
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char unique_id[30];
|
|
uint8_t ShowTopic; // Used to hide/unhide a topic during Discovery to spare some cpu load
|
|
|
|
for (uint32_t i = 0; i < TasmotaGlobal.shutters_present; i++) {
|
|
ResponseClear(); // Clear retained message
|
|
TasmotaGlobal.masterlog_level = ShowTopic = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
|
|
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_SHT_%d"), ESP_getChipId(), i + 1);
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/cover/%s/config"), unique_id);
|
|
|
|
if (Settings->flag.hass_discovery && Settings->flag3.shutter_mode && ShutterGetStartRelay(i) > 0) {
|
|
ShowTopic = 0; // Show the new generated topic
|
|
if (i > MAX_FRIENDLYNAMES) {
|
|
snprintf_P(stemp1, sizeof(stemp1), PSTR("%s Shutter %d"), SettingsText(SET_DEVICENAME), i + 1);
|
|
} else {
|
|
snprintf_P(stemp1, sizeof(stemp1), PSTR("%s"), SettingsText(SET_FRIENDLYNAME1 + i));
|
|
}
|
|
Response_P(PSTR("{\"name\":\"%s\""), stemp1);
|
|
|
|
GetTopic_P(stemp1, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, stemp1);
|
|
|
|
GetTopic_P(stemp1, CMND, TasmotaGlobal.mqtt_topic, PSTR("Backlog"));
|
|
TryResponseAppend_P(HASS_DISCOVER_SHUTTER_BASE, stemp1, i + 1, i + 1, i + 1);
|
|
|
|
GetTopic_P(stemp1, STAT, TasmotaGlobal.mqtt_topic, PSTR("SHUTTER"));
|
|
GetTopic_P(stemp2, CMND, TasmotaGlobal.mqtt_topic, PSTR("ShutterPosition"));
|
|
TryResponseAppend_P(HASS_DISCOVER_SHUTTER_POS, stemp1, i + 1, stemp2, i + 1);
|
|
|
|
if (ShutterGetTiltConfig(3,i) != ShutterGetTiltConfig(4,i)) {
|
|
GetTopic_P(stemp1, CMND, TasmotaGlobal.mqtt_topic, PSTR("ShutterTilt"));
|
|
TryResponseAppend_P(HASS_DISCOVER_SHUTTER_TILT, stemp1, i + 1, ShutterGetTiltConfig(3,i), ShutterGetTiltConfig(4,i));
|
|
}
|
|
|
|
TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO_SHORT, unique_id, ESP_getChipId());
|
|
TryResponseAppend_P(PSTR("}"));
|
|
} else {
|
|
// terminate loop at first INVALID Settings->shutter_startrelay[i].
|
|
break;
|
|
}
|
|
|
|
TasmotaGlobal.masterlog_level = ShowTopic;
|
|
MqttPublish(stopic, true);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void HAssAnnounceDeviceInfoAndStatusSensor(void)
|
|
{
|
|
char stopic[TOPSZ];
|
|
char stemp1[TOPSZ];
|
|
char stemp2[TOPSZ];
|
|
char unique_id[30];
|
|
uint8_t ShowTopic; // Used to hide/unhide a topic during Discovery to spare some cpu load
|
|
|
|
// Announce sensor
|
|
ResponseClear(); // Clear retained message
|
|
TasmotaGlobal.masterlog_level = ShowTopic = 4; // Hide topic on clean and remove use weblog 4 to see it
|
|
// Clear or Set topic
|
|
snprintf_P(unique_id, sizeof(unique_id), PSTR("%06X_status"), ESP_getChipId());
|
|
snprintf_P(stopic, sizeof(stopic), PSTR(HOME_ASSISTANT_DISCOVERY_PREFIX "/sensor/%s/config"), unique_id);
|
|
|
|
if (Settings->flag.hass_discovery)
|
|
{ // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
char name[TOPSZ]; // friendlyname(33) + " " + "status"
|
|
char prefix[TOPSZ];
|
|
char *state_topic = stemp1;
|
|
char *availability_topic = stemp2;
|
|
ShowTopic = 0; // Show the new generated topic
|
|
snprintf_P(name, sizeof(name), PSTR("%s status"), SettingsText(SET_DEVICENAME));
|
|
GetTopic_P(state_topic, TELE, TasmotaGlobal.mqtt_topic, PSTR(D_RSLT_HASS_STATE));
|
|
GetTopic_P(availability_topic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
|
|
|
|
Response_P(HASS_DISCOVER_BASE, name, state_topic);
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_LWT, availability_topic);
|
|
TryResponseAppend_P(HASS_DISCOVER_SENSOR_HASS_STATUS, state_topic);
|
|
TryResponseAppend_P(HASS_DISCOVER_DEVICE_INFO, unique_id, ESP_getChipId(), SettingsText(SET_DEVICENAME),
|
|
ModuleName().c_str(), TasmotaGlobal.version, TasmotaGlobal.image_name);
|
|
TryResponseAppend_P(PSTR("}"));
|
|
}
|
|
TasmotaGlobal.masterlog_level = ShowTopic;
|
|
MqttPublish(stopic, true);
|
|
|
|
if (!Settings->flag.hass_discovery) {
|
|
TasmotaGlobal.masterlog_level = 0;
|
|
AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_LOG "Home Assistant MQTT Discovery disabled."));
|
|
}
|
|
}
|
|
|
|
void HAssPublishStatus(void)
|
|
{
|
|
Response_P(PSTR("{\"" D_JSON_VERSION "\":\"%s%s\",\"" D_JSON_BUILDDATETIME "\":\"%s\",\"" D_CMND_MODULE " or " D_CMND_TEMPLATE"\":\"%s\","
|
|
"\"" D_JSON_RESTARTREASON "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\",\"" D_CMND_HOSTNAME "\":\"%s\","
|
|
"\"" D_CMND_IPADDRESS "\":\"%_I\",\"" D_JSON_RSSI "\":\"%d\",\"" D_JSON_SIGNAL " (dBm)""\":\"%d\","
|
|
"\"WiFi " D_JSON_LINK_COUNT "\":%d,\"WiFi " D_JSON_DOWNTIME "\":\"%s\",\"" D_JSON_MQTT_COUNT "\":%d,\"LoadAvg\":%lu}"),
|
|
TasmotaGlobal.version, TasmotaGlobal.image_name, GetBuildDateAndTime().c_str(), ModuleName().c_str(), GetResetReason().c_str(),
|
|
GetUptime().c_str(), TasmotaGlobal.hostname, (uint32_t)WiFi.localIP(), WifiGetRssiAsQuality(WiFi.RSSI()),
|
|
WiFi.RSSI(), WifiLinkCount(), WifiDowntime().c_str(), MqttConnectCount(), TasmotaGlobal.loop_load_avg);
|
|
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_HASS_STATE));
|
|
}
|
|
|
|
void HAssDiscovery(void)
|
|
{
|
|
// Configure Tasmota for default Home Assistant parameters to keep discovery message as short as possible
|
|
if (Settings->flag.hass_discovery)
|
|
{ // SetOption19 - Control Home Assistant automatic discovery (See SetOption59)
|
|
Settings->flag.mqtt_response = 0; // SetOption4 - Switch between MQTT RESULT or COMMAND - Response always as RESULT and not as uppercase command
|
|
Settings->flag.decimal_text = 1; // SetOption17 - Switch between decimal or hexadecimal output - Respond with decimal color values
|
|
Settings->flag3.hass_tele_on_power = 1; // SetOption59 - Send tele/%topic%/STATE in addition to stat/%topic%/RESULT - send tele/STATE message as stat/RESULT
|
|
// the purpose of that is so that if HA is restarted, state in HA will be correct within one teleperiod otherwise state
|
|
// will not be correct until the device state is changed this is why in the patterns for switch and light, we tell HA to trigger on STATE, not RESULT.
|
|
//Settings->light_scheme = 0; // To just control color it needs to be Scheme 0 (on hold due to new light configuration)
|
|
}
|
|
|
|
if (Settings->flag.hass_discovery || (1 == hass_mode))
|
|
{ // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
hass_mode = 2; // Needed for generating bluetooth entities for MI_ESP32
|
|
// Send info about buttons
|
|
HAssAnnounceButtons();
|
|
|
|
// Send info about switches
|
|
HAssAnnounceSwitches();
|
|
|
|
// Send info about sensors
|
|
HAssAnnounceSensors();
|
|
|
|
// Send info about shutters
|
|
HAssAnnounceShutters();
|
|
|
|
// Send info about relays and lights
|
|
HAssAnnounceRelayLight();
|
|
|
|
// Send info about status sensor
|
|
HAssAnnounceDeviceInfoAndStatusSensor();
|
|
TasmotaGlobal.masterlog_level = 0; // Restores weblog level
|
|
hass_mode = 3; // Needed for generating bluetooth entities for MI_ESP32
|
|
}
|
|
}
|
|
|
|
void HAssDiscover(void)
|
|
{
|
|
hass_mode = 1; // Force discovery
|
|
TasmotaGlobal.discovery_counter = 1; // Delayed discovery
|
|
}
|
|
|
|
void HAssAnyKey(void)
|
|
{
|
|
if (!Settings->flag.hass_discovery) { return; } // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
uint32_t key = (XdrvMailbox.payload >> 16) & 0xFF; // 0 = KEY_BUTTON, 1 = KEY_SWITCH
|
|
uint32_t device = XdrvMailbox.payload & 0xFF; // Device number or 1 if more Buttons than Devices
|
|
uint32_t state = (XdrvMailbox.payload >> 8) & 0xFF; // 0 = Off, 1 = On, 2 = Toggle, 3 = Hold, 10,11,12,13 and 14 for Button Multipress
|
|
|
|
if (!key && KeyTopicActive(0)) { // Button and ButtonTopic is active
|
|
device = (XdrvMailbox.payload >> 24) & 0xFF; // Button number
|
|
}
|
|
|
|
char scommand[CMDSZ];
|
|
char sw_topic[TOPSZ];
|
|
char key_topic[TOPSZ];
|
|
char trg_state[8];
|
|
char *tmpbtn = SettingsText(SET_MQTT_BUTTON_TOPIC);
|
|
char *tmpsw = SettingsText(SET_MQTT_SWITCH_TOPIC);
|
|
uint8_t evkey = 0; // Flag to select the correct topic for a trigger or a binary_sensor
|
|
Format(sw_topic, tmpsw, sizeof(sw_topic));
|
|
Format(key_topic, tmpbtn, sizeof(key_topic));
|
|
|
|
if (state >= 2) { evkey = 1;}
|
|
snprintf_P(scommand, sizeof(scommand), PSTR("%s%d%s"), (key) ? "SWITCH" : "BUTTON", device, (evkey) ? "T" : "");
|
|
|
|
char stopic[TOPSZ];
|
|
|
|
if (!key) {
|
|
if (state == 3) {
|
|
snprintf_P(trg_state, sizeof(trg_state), GetStateText(3));
|
|
} else {
|
|
if (state == 2) { state = 10; }
|
|
GetTextIndexed(trg_state, sizeof(trg_state), state -9, kHAssTriggerStringButtons);
|
|
}
|
|
}
|
|
|
|
GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, scommand);
|
|
Response_P(S_JSON_COMMAND_SVALUE, (evkey) ? "TRIG" : PSTR(D_RSLT_STATE), (key) ? GetStateText(state) : trg_state);
|
|
MqttPublish(stopic);
|
|
}
|
|
|
|
bool HAssMqttLWT(void)
|
|
{
|
|
if (strncasecmp_P(XdrvMailbox.topic, PSTR(HOME_ASSISTANT_LWT_TOPIC), strlen(HOME_ASSISTANT_LWT_TOPIC)) != 0) {
|
|
return false;
|
|
}
|
|
if (Settings->flag.hass_discovery && (strncasecmp_P(XdrvMailbox.data, PSTR("online"), strlen("online")) == 0) && (XdrvMailbox.data_len == 6)) {
|
|
MqttPublishTeleState();
|
|
return true;
|
|
} else { return false; }
|
|
}
|
|
|
|
void HassLwtSubscribe(bool hasslwt)
|
|
{
|
|
char htopic[TOPSZ];
|
|
snprintf_P(htopic, sizeof(htopic), PSTR(HOME_ASSISTANT_LWT_TOPIC));
|
|
if (hasslwt && (Settings->flag.hass_discovery)) {
|
|
MqttSubscribe(htopic);
|
|
} else { MqttUnsubscribe(htopic); }
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xdrv12(uint32_t function)
|
|
{
|
|
bool result = false;
|
|
bool hasslwt = HOME_ASSISTANT_LWT_SUBSCRIBE;
|
|
if (Settings->flag.mqtt_enabled)
|
|
{ // SetOption3 - Enable MQTT
|
|
switch (function)
|
|
{
|
|
case FUNC_EVERY_SECOND:
|
|
if (TasmotaGlobal.discovery_counter)
|
|
{
|
|
TasmotaGlobal.discovery_counter--;
|
|
if (!TasmotaGlobal.discovery_counter)
|
|
{
|
|
HAssDiscovery(); // Scheduled discovery using available resources
|
|
NewHAssDiscovery(); // Send the topics for Home Assistant Official Integration
|
|
}
|
|
}
|
|
else if (Settings->flag.hass_discovery && Settings->tele_period)
|
|
{ // SetOption19 - Control Home Assistantautomatic discovery (See SetOption59)
|
|
hass_tele_period++;
|
|
if (hass_tele_period >= Settings->tele_period)
|
|
{
|
|
hass_tele_period = 0;
|
|
ResponseClear();
|
|
HAssPublishStatus();
|
|
}
|
|
}
|
|
break;
|
|
case FUNC_ANY_KEY:
|
|
HAssAnyKey();
|
|
break;
|
|
/*
|
|
case FUNC_MQTT_INIT:
|
|
hass_mode = 0; // Discovery only if Settings->flag.hass_discovery is set
|
|
TasmotaGlobal.discovery_counter = 10; // Delayed discovery
|
|
// if (!Settings->flag.hass_discovery) {
|
|
// NewHAssDiscovery();
|
|
// }
|
|
break;
|
|
*/
|
|
case FUNC_MQTT_SUBSCRIBE:
|
|
HassLwtSubscribe(hasslwt);
|
|
hass_mode = 0; // Discovery only if Settings->flag.hass_discovery is set
|
|
TasmotaGlobal.discovery_counter = (0 == Mqtt.initial_connection_state) ? 1 : 10; // Delayed discovery
|
|
break;
|
|
case FUNC_MQTT_DATA:
|
|
result = HAssMqttLWT();
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_HOME_ASSISTANT
|