webui article added

ADC.md

@@ -7,9 +7,27 @@ After wiring a peripheral to A0 pin you have to configure it in **Configure Modu
 
 ![ADC configuration](https://i.postimg.cc/qqYmYG3v/ADC.png)
 
-The reading will show in web UI's sensor section as "Analog0 %value%" 
+#|Option|WebUI display|MQTT mesage
-A message will be published in `tele/%topic%/SENSOR` JSON response as `"ANALOG":{"A0":%value%}`. The pin has a 10-bit resolution, which means _%value%_ can be between `0` and `1024`.
+-|-|-|-
+0|None| none | none
+1|Analog | Analog0 _%value%_ | `{"A0":%value%}`
+2|Temperature | Temperature _%value%_ °C (°F) | `{"Temperature":%value%},"TempUnit":"C"}`
+3|Light | Illuminance _%value%_ lux | `{"Illuminance":%value%}`
+4|Button | none | none
+5|Buttoni | none | none
+
+The reading will show in web UI's sensor section as "_%option% %value%_" depending on the selected option. Tasmota calculates the values for temperature and light, analog values can be `1` to `1024`.
+
+Example: ADC as `Analog (1)`    
 ![ADC in web UI](https://i.postimg.cc/zv9jpXsL/Analog0.png)
+
+A message will be published in `tele/%topic%/SENSOR` JSON response as `"ANALOG": ` depending on the selected option.
+
+Example: ADC a Light(3)
+18:55:09 MQT: tele/tasmota/SENSOR = {"Time":"2019-10-31T18:55:09","ANALOG":{"Illuminance":8}}
+
+> Careful when setting ADC as Button, if there is constant voltage on the pin it might register as a [long press](Button-usage#long-press) and reset the device to firmware defaults
+
 ### Rule triggers
 Use these triggers in rules:    
 

Home.md

@@ -6,7 +6,7 @@ Alternative open source firmware for [**ESP8266**](https://en.wikipedia.org/wiki
 <img src="https://user-images.githubusercontent.com/5904370/55973675-661c1400-5c86-11e9-8453-0082bfcd61b6.png" width="200" align="right"> </img>
 - Easy [initial setup](initial-configuration)
 - Browser based user interface for configuration and control
-- Firmware [updates](Upgrading) via OTA or web UI
+- Firmware [updates](Upgrading) via OTA or [web UI](webui)
 - [Rules](Rules) and [Timers](commands#Timers) for on device automation
 - Control with [web UI](commands#console-in-web-ui), [MQTT](MQTT), [web requests](commands#web) or [serial terminal](commands#serial)
 - Easy configuration of devices using [Templates](Templates)

WebUI.md

@@ -0,0 +1,26 @@
+Tasmota's web user interface is a practical way to control and manage your tasmotised device.
+
+### Configuration
+Configuration menu allows you to configure everything from components to Wi-Fi and gives you the option to backup and restore the configuration in a secure location.
+
+### Information
+Displays a single page loaded with information about the device including: current Tasmota version, Wi-Fi AP data, MQTT host data and more
+
+### Firmware Upgrade
+An easy to use menu to initiate a firmware [upgrade](Upgrading) from an uploaded .bin or an OTA server.
+
+### Console
+Terminal access to Tasmota. Issue [commands](Commands) here or follow the information stream. Useful for debugging with [˙Weblog`](Commands#weblog) commands
+
+## Themes
+WebUI is themable starting with »6.6.0. To apply the theme copy the entire command and send it in console or via MQTT.
+
+Dark theme (default since 7.0)
+```
+WebColor {"WebColor":["#eeeeee","#181818","#4f4f4f","#000000","#dddddd","#008000","#222222","#ff0000","#008000","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999","#000000"]}
+```
+
+White theme (default until 6.7.1.)
+```
+WebColor {"WebColor":["#000000","#ffffff","#f2f2f2","#000000","#ffffff","#000000","#ffffff","#ff0000","#008000","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999"]}
+```